HAC8FS-WF-Q-ADA
2
This water cooler is certified to NSF/ANSI 61 and 372. GENERAL Self-contained, electric refrigerated wall-mounted water cooler easily accessible to physically challenged individuals. When properly installed, unit meets state and federal requirements for both children or adults as defined by the Americans with Disabilities Act. Unit is certified to NSF/ANSI 61 & 372 and meets requirements of Safe Drinking Water Act. Unit provides 50° F water at 80° F inlet water and 90° F ambient. LEAD REDUCTION FILTER Halsey Taylor Water Cooler With Filter is equipped with the Water Sentry HWF172 lead reduction system which is designed to remove cysts, such as cryptrosporidium and giardia, lead particles and chlorine taste and odor . The filter has been tested to the following NSF International standards: NSF/ANSI Standards 42 Chlorine, and T aste and Odor . NSF/ANSI Standard 53 for Reduction of Lead and Cyst. Features include Quick-Disconnect, 1/4 turn installation. Automatic inlet shut-off valve that closes when filter is removed. High-grade filter is made with activated carbon and patented ATS lead-removal media. Cap and housing shall be made of rust and corrosion free plastic. Filter should be replaced every 1,500 gallons (5678 liters) or approximately one (1) year after instal- lation. Use part # 55987C when ordering replacement filter . CABINET Stainless steel panels resist wear and corrosion. Durable satin finish helps hide water spots and fingerprints. COOLER TOP Non-corrosive stainless steel cooler top, number 300 series with satin finish resists stains and corrosion and is easy to maintain. Anti-splash ridge reduces splatter . Contoured to insure proper drainage. BUBBLER Exclusive one-piece, chrome-plated two- stream mound-building bubbler with non-removable anti-squirt feature and integral hood insures a satisfying drink of water . PUSH BAR ACTUATION MECHANISM Self-closing light-touch push bars on front and sides with raised letters for the visually impaired. AUTOMATIC STREAM HEIGHT REGULATOR Self-closing assembly is located inside unit to prevent tampering. Unit resists corrosion and liming. A constant stream height is automatically maintained under line pressures that vary from 20 to 105 psi. INLET STRAINER Easily cleaned in-line strainer screen traps particles of 140 microns or larger before they enter the waterway . TEMPERATURE CONTROL Positive sensing thermostat for controlling temperature of storage tank water . Factory set at 50° F Adjustable ± 5° F . STORAGE TANK Non-pressurized stainless steel evaporator/storage tank for long life. Waterways are certified to NSF/ANSI 61, far exceeding the requirements of the Safe Drinking Water Act. REFRIGERATION SYSTEM Hermetically sealed, positive start compressor with lifetime lubrication and built-in overload protection, efficient capillary sizing, large capacity dryer-strainer , and self-lubricated fan cools copper/aluminum condenser . System uses R134A refrigerant. Protected by Halsey Taylor’ s Limited 5 Year Warranty . VENTILATION Insure proper ventilation by maintaining 6" (152mm) minimum clearance from cabinet louvers to wall. SUGGESTED SPECIFICATIONS Shall deliver 8.0 GPH of 50° F water at 90°F ambient and 80° F inlet water . Shall have stainless steel basin with removable drain strainer . Bubbler shall be two-stream, mound building type. Separate valve and automatic stream regulator shall be mounted within cabinet. Refrigeration system shall employ high efficiency , positive start compressor using R134A, non-pressurized tank with totally encapsulated insulation and be controlled by positive sensing thermostat. Shall have front and side push-bar water controls with raised lettering for the visually impaired. Cooler shall comply with ANSI 117:1 and ADA for visual and motion disabilities. The manufacturer shall certify the unit to meet the requirements of NSF/ANSI 61 & 372 and the Safe Drinking Water Act. Unit complies with ARI Standard 1010. NOTE: Continued product improvement makes specifications subject to change without notice. See Halsey Taylor website for most current spec sheet. Standard finish is Platinum Vinyl Optional Finish (at additional cost) Stainless Steel Optional Accessories (extra cost) Glass Filler Kit Easy-Flex ™ Bubbler HALSEY TAYLOR, 2222 CAMDEN COURT , OAK BROOK, ILLINOIS 60523 A13 / 8-2012 MODEL: HAC8FS-WF-Q ADA Barrier-Free Cooler With Filter halseytaylor .com HAC-Q BARRIER-FREE SERIES d e t a R g n i p p i h S . L . F e s a B y t i c a p a C H P G l e d o M t t a W t h g i e W s p m A e t a R * F ° 0 5 o t d e l o o C . o N Ambient Air Temp e g a s U . b l . p a C 70°F 80°F 90°F † 100°F HAC8FS-WF-Q ADA 9.7 8.8 8.0 7.2 8.0 4.0 67 370 * With projector service and tap water at 80°F † UL listed and complies with ARI Standard 1010 Trap and service stop not included JOB NAME: ENGINEER/CONTRACTOR NAME: APPROVAL: DATE:
-
Upload
richard-baker -
Category
Documents
-
view
222 -
download
2
description
HAC8FS-WF-Q-ADA
Transcript of HAC8FS-WF-Q-ADA
This water cooler is certified toNSF/ANSI 61 and 372.
GENERALSelf-contained, electric refrigerated wall-mountedwater cooler easily accessible to physicallychallenged individuals. When properly installed,unit meets state and federal requirements forboth children or adults as defined by theAmericans with Disabilities Act. Unit is certifiedto NSF/ANSI 61 & 372 and meets requirementsof Safe Drinking Water Act. Unit provides 50° Fwater at 80° F inlet water and 90° F ambient.
LEAD REDUCTION FILTERHalsey Taylor Water Cooler With Filter isequipped with the Water Sentry HWF172 leadreduction system which is designed to removecysts, such as cryptrosporidium and giardia,lead particles and chlorine taste and odor. Thefilter has been tested to the following NSFInternational standards: NSF/ANSI Standards42 Chlorine, and Taste and Odor. NSF/ANSIStandard 53 for Reduction of Lead and Cyst.Features include Quick-Disconnect, 1/4 turninstallation. Automatic inlet shut-off valve thatcloses when filter is removed. High-grade filteris made with activated carbon and patentedATS lead-removal media. Cap and housing shallbe made of rust and corrosion free plastic. Filtershould be replaced every 1,500 gallons (5678liters) or approximately one (1) year after instal-lation. Use part # 55987C when orderingreplacement filter.
CABINETStainless steel panels resist wear and corrosion.Durable satin finish helps hide water spots andfingerprints.
COOLER TOPNon-corrosive stainless steel cooler top, number300 series with satin finish resists stains andcorrosion and is easy to maintain. Anti-splashridge reduces splatter. Contoured to insureproper drainage.
BUBBLERExclusive one-piece, chrome-plated two-stream mound-building bubbler withnon-removable anti-squirt feature and integralhood insures a satisfying drink of water.
PUSH BAR ACTUATION MECHANISMSelf-closing light-touch push bars on front and sides with raised letters for the visuallyimpaired.
AUTOMATIC STREAM HEIGHT REGULATORSelf-closing assembly is located inside unit toprevent tampering. Unit resists corrosion andliming. A constant stream height is automaticallymaintained under line pressures that vary from20 to 105 psi.
INLET STRAINEREasily cleaned in-line strainer screen traps particles of 140 microns or larger before theyenter the waterway.
TEMPERATURE CONTROLPositive sensing thermostat for controlling temperature of storage tank water. Factory setat 50° F Adjustable ± 5° F.
STORAGE TANKNon-pressurized stainless steelevaporator/storage tank for long life.Waterways are certified to NSF/ANSI 61, far exceeding the requirements of the Safe Drinking Water Act.
REFRIGERATION SYSTEMHermetically sealed, positive start compressorwith lifetime lubrication and built-in overloadprotection, efficient capillary sizing, largecapacity dryer-strainer, and self-lubricated fancools copper/aluminum condenser. Systemuses R134A refrigerant. Protected by HalseyTaylor’s Limited 5 Year Warranty.
VENTILATIONInsure proper ventilation by maintaining 6" (152mm) minimum clearance from cabinet louvers to wall.
SUGGESTED SPECIFICATIONSShall deliver 8.0 GPH of 50° F water at 90° Fambient and 80° F inlet water. Shall havestainless steel basin with removable drainstrainer. Bubbler shall be two-stream, moundbuilding type. Separate valve and automaticstream regulator shall be mounted withincabinet. Refrigeration system shall employ highefficiency, positive start compressor usingR134A, non-pressurized tank with totallyencapsulated insulation and be controlled bypositive sensing thermostat. Shall have frontand side push-bar water controls with raisedlettering for the visually impaired. Cooler shallcomply with ANSI 117:1 and ADA for visual and motion disabilities. The manufacturer shallcertify the unit to meet the requirements ofNSF/ANSI 61 & 372 and the Safe Drinking WaterAct. Unit complies with ARI Standard 1010.
NOTE: Continued product improvement makes specifications subject to change without notice. See Halsey Taylor website for most current spec sheet.
Standard finish is Platinum Vinyl
Optional Finish (at additional cost)
Stainless Steel
Optional Accessories (extra cost)
Glass Filler KitEasy-Flex™ Bubbler
HALSEY TAYLOR, 2222 CAMDEN COURT, OAK BROOK, ILLINOIS 60523
A13 / 8-2012
MODEL: HAC8FS-WF-Q ADA Barrier-Free CoolerWith Filter
halseytaylor.com
HAC-Q BARRIER-FREE SERIESdetaRgnippihS.L.FesaByticapaC HPGledoMttaWthgieWspmAetaR*F°05 ot delooC.oN
Ambient Air Temp egasU.bl.paC
70°F 80°F 90°F† 100°FHAC8FS-WF-Q ADA 9.7 8.8 8.0 7.2 8.0 4.0 67 370
* With projector service and tap water at 80° F† UL listed and complies with ARI Standard 1010
Trap and service stop not included
JOB NAME:
ENGINEER/CONTRACTOR NAME:
APPROVAL:
DATE:
Printed in the U.S.A.
HAC8FS-WF-Q ADA
Barrier-Free Cooler(CONTINUED)
MOUNTING HEIGHTMounting height recommended 281/2" frombasin to floor. May be mounted at any desiredheight. Check local codes.
MOUNTING INSTRUCTIONSMount trap and install service stop to buildingsupply line. Anchor hanger bracket securely towall on all sides. To insure proper engaging ofwaste line into trap, centerline of trap must be
61/4" from wall face. Remove slip nut and gasketfrom trap and install on waste line tube. Hangcooler on bracket and engage waste line tubeinto trap inlet. Centerline height of waste outletwill vary from floor line depending on mountingheight. Install 3/8 supply tube to in-line strainer.Secure bottom of cooler to wall using holes provided.
Trap and service stop not included.
OPERATING PRESSURES:Supply water - 105 psi maximum
ELECTRICAL Furnished with plug-in, 3-wire grounding typeservice cord. Standard 120 volt, 60 Hz, singlephase. Install 120-volt receptacle, rated at 15-amp minimum, to receive 3-wire parallelblade grounding type male plug.
FINISHED FLOOR
*
HANGER BRACKET
E
F
5/16" (8mm) DIA. (5 HOLES)
A
D
B
E
C
FILTER
12 5/16"313mm
1 3/8"35mm
1 3/8"35mm
5 3/4"146mm
5 3/4"146mm
LC
27"686mm
31 7/8"810mm
RIM HEIGHT
33"838mm
ORIFICE HEIGHT
18 5/8"473mm
2 9/16"65mm
13 7/8"352mm
18 3/8"467mm
21 3/8"543mm
25"635mm
31"787mm 2 1/2"
64mm
3 1/2"89mm
4 1/2"114mm
2 7/16"63mm
5"127mm
10"254mm
11/16"18mm
2 9/16"65mm
7 1/4"185mm
6 1/4"159mm
8"203mm
4 9/16"116mm
6 3/4"172mm
A. RECOMMENDED WATER SUPPLY LOCATION. SHUT OFF VALVE (NOT FURNISHED) TO ACCEPT 3/8" O.D. UNPLATED COPPER TUBEB. RECOMMENDED LOCATION FOR WASTE OUTLET 1-1/4" O.D. DRAINC. 1-1/4" TRAP NOT FURNISHEDD. ELECTRICAL SUPPLY (3) WIRE RECESSED BOXE. INSURE PROPER VENTILATION BY MAINTAINING 6" (152 mm) MIN. CLEARANCE FROM CABINET LOUVERS TO WALLF. 7/16" BOLT HOLES FOR FASTENING UNIT TO WALL
FRONT VIEW SIDE VIEW
* Adult ADA requirement. 24" (609mm) for Child ADA.Adjust other measurements accordingly.
