GRIPPLE _uk Product Guide 2009, hangers system

Product Guide

2

Page

Gripple - the applications 3

Gripple - the company 6

Gripple - the product concept 8

Applications 10

HVAC 10

Mechanical 12

Electrical 14

Catenary 16

Food/humidity 18 Signage and shopfitting 19

Cold room 20

Kits 21

Standard hanger 22

Trapeze 24

Y-fit hanger 26

Y-fit accessory 28

Y-pipe hanger 30

Y-pipe accessory 32

G-bracket 34

Catenary (indoor) 36

C-clip 38

Catenary (outdoor) 40

Stainless steel 42

End fixings 43

Loop 44

Stud 44

Toggle 45

Snap hook 46

Link hook 46

Karabiner 47

Cladding hook 47

Eyelet 48

45º Eyelet 48

90º Eyelet 49

End stop 50

Barrel 50

Magnetic pad 51

25mm wedge 51

Alphawedge 52

Multiwedge 2 52

TR60 wedge 53

MF wedge 53

Concrete anchors 54

Accessory fixings 55

Concrete 56

Wood 57

6mm, 8mm and 10mm holes 58

Beam & purlins 59

Eyebolts & turnbuckles 59

Tools & other accessories 60

Manufacturer’s recommendations 61

Notes 62

Contact details 70

CONT

ENTS

Mechanical pages 12 - 13

Cold roompage 20

Electricalpages 14 - 15

3

Signage and shopfitting page 19

HVACpages 10 - 11

Catenarypages 16 -17

Food/humidity page 18

4

Catenary (indoor) kit suspending spiral ducting

page 36

Standard hanger kit suspending lighting page 22

Standard hanger kit suspending ducting

page 22

Standard hanger kit suspending luminaires page 22

Trapeze kit suspending air conditioning

page 24

Catenary (outdoor)suspending decorationspage 40

Y-pipe hanger suspending piping

page 30

Y-fit hanger suspending cable basketpage 26

Gripple - the applications

5www.gripple.com

6

Gripple : the companyDeveloped to overcome cumbersome ways of joining fence wires, the original Gripple was launched in the UK in 1988. Despite being a trail-blazer in the realms of agriculture and viticulture, we soon realised the potential of the industrial market too. In 1998 we entered the world of construction with a series of load-rated kits spawned from our rope-grip device, designed exclusively for hanging mechanical and electrical services, and took the market by storm.

Following our successful launch into the UK industrial market in the late 1990s, we maximised the products potential by expanding across the globe. In 2000, Gripple Europe was founded, signified by the construction of a brand new office in the beautiful Alsace region of France, and the following year Gripple Inc. was established just outside Chicago.

As an employee-owned business, everyone at Gripple is a shareholder, giving strength to the employees and allowing them control over the destiny of their company. We have a working model in place that we’re proud of, and we constantly strive to keep the values of our business upheld.

Gripple : solution drivenFrom the very beginning, we’ve received numerous accolades for our originality, verve and enterprise, making us a true multi-award winning company. This is in no small part thanks to our core values and philosophy, which have remained the same throughout. To us, innovation is so much more than a simple buzzword; it’s the foundation of our culture. Our entire company evolved from a unique idea, something which grew exponentially and allowed us to invest in our state-of-the-art manufacturing equipment. By recognising the importance of this, we’re keen to further the expansion of our product range and continue to provide people with novel solutions to their age-old problems. Driven by our open-minded approach, we positively thrive on fresh ideas, some of which are strong enough to warrant a complete division of their own. Our sister company, Loadhog, was opened in Sheffield in 2003, with the goal of developing transit solutions such as the Loadhog Lid, the SmartStak frame, and the revolutionary pallet/dolly hybrid, the Pally.

http://www.gripple.com/about-us/story/company.html

http://www.gripple.com/about-us/story/legacy.html

7

Gripple : quality assuredQuality is everything to Gripple; not just in the products we make and the manufacturing processes we employ, but in the way we do business. Our compliance to the International Organisation for Standardization BS EN ISO 9001 at our Sheffield manufacturing plant is the backbone of our own quality management system, and we’re proud to have achieved this through the reputable LRQA.

Gripple : the environmentEver since the formation of our company, we at Gripple have always appreciated the importance of sustainability. Much like our stringent Quality procedures, we have an Environmental Management System in place certified to ISO 14001, and in 2007 we were the proud winners of the EEF Environmental Award.

As a manufacturing plant, we recognise our responsibility to reduce our impact on the planet. Over the last few years, we have managed to maximise our energy efficiency, decrease electricity use, reduce landfill/incinerated waste, increase recycling, conserve our use of raw materials, and minimise our packaging. We continuously strive to integrate sustainability into our design process, which is epitomised by the resounding fact that a Gripple today uses 30% less zinc than the original design, without compromising its strength or functionality. Wire rope suspensions also consume, on average 1.2kg less CO2 per metre than threaded rod

You can be confident we’ve minimised our environmental impact as far as possible during the design and manufacture of our goods, and we believe our products and their applications can play a fundamental part in you achieving your own suitability objectives.

http://www.gripple.com/products/testing/

http://www.gripple.com/about-us/gripple-and-the-environment.html

Why use Gripple hangers?Gripple hangers are designed specifically to make your job easier, as an ingenious replacement for threaded rod.

• Fast to install• Cost effective - can significantly reduce installation costs• Versatile• Simple to use• Strong and safe• Aesthetically discreet and lightweight• Supplied in ready-to-use kits• Consume 90% less CO2 than threaded rod

How does a Gripple work?The principal element of all Gripple hanger assemblies is the ‘Gripple’ locking fastener. This inventive mechanism not only secures the wire rope, but also allows the height of the installation to be adjusted.

What is in a Gripple kit?A Gripple kit provides you with everything you need to complete the suspension, from the Gripple fastener itself to the structural fixing method.

Wire rope (entry hole)

Serrated teeth

Locking wedge

End cap

Zinc housing

Setting key (entry hole)

Stainless steel springs (type 302 S26)

Setting key

Locking Gripple fastener

Length of wire rope

Ferruled End fixing

8

Gripplesize

Angle from vertical0º 15º 30º 45º 60º

No.1 10 kg 9.6 kg 8.6 kg 7 kg 5 kgNo.2 45 kg 43 kg 39 kg 31 kg 22 kgNo.3 90 kg 86 kg 77 kg 63 kg 45 kgNo.4 225 kg 217 kg 195 kg 159 kg 112 kgNo.5 325 kg 314 kg 281 kg 230 kg 162 kg

% SWL 100% 96% 86% 70% 50%

Can I hang a Gripple at an angle?The load rating for a Gripple hanger is based on the suspension being hung vertically. If the wire rope is suspended at an angle, an additional sideways load is applied which reduces the load capacity of the overall suspension. The nett effect is shown in the table below. No Gripple hanger should be hung at an angle in excess of 60º from vertical.

Are Gripple kits load rated?Gripple hangers are available in 5 load rated sizes. Each size is designed to carry a specific weight range and has a designated safe working load (SWL). The SWL gives a minimum 5:1 safety factor in a vertical plane and applies to all lengths and end fixings, unless stated otherwise.

Size Weight Range SWLNo.1 0 - 10 kg 10 kgNo.2 10 - 45 kg 45 kgNo.3 45 - 90 kg 90 kgNo.4 90 - 225 kg 225 kgNo.5 225 - 325 kg 325 kg

To calculate the correct size:

Weight per metre x distance between hangers

For example, a weight of 12kg per metre, with 2m between hangers = 24kg, therefore a No.2 should be used (10kg to 45kg SWL range).

9

Which Gripple hanger should I use?To choose the most suitable Gripple hanger for your site, just follow these simple steps:

1. Select the hanger size (see tables above)2. Choose the kit type (page 21 onwards)3. Pick the end fixing method (page 43 onwards)

For further assistance, please contact our sales team on 0800 184264 (UK only).

10

• Rectangular duct • Spiral duct • Oval duct • Fabric duct • Destratification fans • Air conditioning units • Plenum boxes • Radiant panels • Heaters • Fan coil units • Chill beams

HVAC

Rectangular duct suspended with a Standard hanger and a M8 adaptor

Spiral duct suspended with a Standard hanger

Rectangular duct suspended with Trapeze

End fixing - Stud (p.44)

Kit - Standard hanger (p.22)

Accessory fixing - M8 adaptor (p.58)

Tools & other accessories - Magnetic corner saddles (p.60)


Kit - Trapeze (p.24)

End fixing - 25mm wedge (p.51)


11

• Rectangular duct • Spiral duct • Oval duct • Fabric duct • Destratification fans • Air conditioning units • Plenum boxes • Radiant panels • Heaters • Fan coil units • Chill beams

Radiant panel suspended with a Standard hanger and a Y-fit accessory

Air conditioning unit suspended with Standard hangers

Chill beam suspended with Standard hangers



Kit - Y-fit accessory (p.28)

End fixing - Snap hook (p.46)




End fixing - 90º eyelet (p.49)



12

• Water pipe • Drainage pipe • Gas pipe • Refrigeration pipe • Condensation water pipe • Chill beam • Heater • Ceiling grid • Suspended ceiling • Acoustic baffle

Mechanical

Twin plastic pipes suspended with a Y-pipe hanger

Triple copper pipes suspended with a Standard hanger and a Y-pipe accessory

Pipes in basket suspended with a Standard hanger and a Y-fit accessory


Kit - Y-pipe hanger (p.30)

End fixing - Multiwedge 2 (p.52)


Kit - Y-pipe accessory (p.32)





13

• Water pipe • Drainage pipe • Gas pipe • Refrigeration pipe • Condensation water pipe • Chill beam • Heater • Ceiling grid • Suspended ceiling • Acoustic baffle

Pipes in basket suspended with a Standard hanger and a Y-fit accessory

Gas heater suspended with Standard hanger

Ceiling grids for suspended ceilings suspended with Standard hanger

Acoustic baffle suspended with Standard hanger


End fixing - 90º eyelet (p.49)

Accessory fixing - Concrete screw (p.56)


End fixing - Loop (p.44)




14

• Busbar • Cable ladder • Cable tray • Cable basket • Channel • Trunking • Light rafts • Luminaires • Secondary support • Safety lines • High bay lights • Electrical cables • CCTV

Electrical


Cable basket suspended with a Standard hanger and a Y-fit accessory

Cable basket suspended with a Y-fit hanger and Wire anchor

Heavy duty cable ladder suspended with Standard hanger






Accessory fixing - Wire anchor (p.56)

Kit - Y-fit hanger (p.26)


15

• Busbar • Cable ladder • Cable tray • Cable basket • Channel • Trunking • Light rafts • Luminaires • Secondary support • Safety lines • High bay lights • Electrical cables • CCTV

High bay light suspended with a Standard hanger

Containment suspended with a Standard hanger

Luminaire suspended from a Catenary, using a C-clip



Accessory fixing - Adaptor (p.58)

Kit - Y-fit hanger (p.26)

End fixing - Toggle (p.45)

Kit - Catenary (indoor) (p.36)

Kit - C-clip (p.38)

Accessory fixing - Spring clip (p.58)

16

• Overhead catenary wire • Christmas lighting • Decoration • Advertising banners • Public lighting • Guard rails • Retail lighting • Retail signage • Distribution centre lighting

Catenary

Christmas lighting supported by Catenary wires

Public lighting supported by Catenary wires

Advertising banner supported by Catenary wires

Catenary (outdoor)

Kit - Catenary (outdoor) (p.40)

Kit - Catenary (outdoor)(p.40)

Catenary (outdoor) applications: Catenary (indoor) applications:

17

• Overhead catenary wire • Christmas lighting • Decoration • Advertising banners • Public lighting • Guard rails • Retail lighting • Retail signage • Distribution centre lighting

Accessory fixing - Spring clip(p.58)

Catenary around an I-beam to create a primary support structure

Lighting suspended from a Catenary wire, using C-clip

Overhead Catenary support using C-clip

Kit - Catenary (indoor)(p.36)

Kit - Catenary (indoor)(p.36)

Kit - C-clip (p.38)

Catenary (indoor) C-clip

Catenary (outdoor) applications: Catenary (indoor) applications:

18

• Lighting • Duct work • Pipework • Signage • Ventilation systems • Cable containment • Retail banners • Information signs • Exhibition supports • Advertising signs • Bespoke displays

Food/humidity

Ventilation fan suspended with Stainless steel hanger

Ventilation fan suspended with Stainless steel hanger

Luminaire suspended with Stainless steel hanger


Kit - Stainless steel (p.42)








19

• Lighting • Duct work • Pipework • Signage • Ventilation systems • Cable containment • Retail banners • Information signs • Exhibition supports • Advertising signs • Bespoke displays

Signage and shopfitting

Emergency light suspended with Y-fit hanger

Bicycle suspended with Standard hanger

Signage suspended with Standard hanger








End fixing - Barrel (p.50)

20

• Cold rooms • Refrigeration cells • Freezer rooms • Insulated sandwich panels

Cold room

Sandwich panel with mushroom bolt, suspended with Standard hanger

Sandwich panel suspended with Standard hanger and a Turnbuckle

Sandwich panel suspended with Standard hanger and Turnbuckle





Accessory fixing - Turnbuckle (p.59)



Accessory fixing - Turnbuckle (p.59)

21

• Cold rooms • Refrigeration cells • Freezer rooms • Insulated sandwich panels

Cold room KitsStandard hangerUsed to suspend a variety of mechanical and electrical services from different substrates

TrapezePurpose-made one channel Gripple, ideal for multi-tiered installations

Y-fit hangerSingle hanger with two attachment points at service level

Y-pipe hangerDesigned to suspend twin or triple runs of pipe Ø 10-65mm or 19-32mm

Catenary (indoor)Creates a secure overhead span between two support structures, to suspend mechanical, electrical and HVAC services

Stainless steelFor use in humid environments and areas subject to sanitisation, such as clean rooms

see page 22

see page 24

see page 26

see page 30

see page 36

see page 42

see page 34G-bracketBespoke hanger for cable tray and basket allowing easy loading and unloading of cables

see page 40

Catenary (outdoor)Creates a secure overhead span between two support structures, to suspend lights, decorations and banners

Length(m)

No.10-10 kg

No.210-45 kg

No.345-90 kg

No.490-225 kg

No.5225-325 kg

1 HF01-1M HF02-1M HF03-1M HF01-1M HF05-1M2 HF01-2M HF02-2M HF03-2M HF04-2M HF05-2M3 HF01-3M HF02-3M HF03-3M HF04-3M HF05-3M4 HF01-4M HF02-4M HF03-4M HF04-4M HF05-4M5 HF01-5M HF02-5M HF03-5M HF04-5M HF05-5M

Loop 10 HF01-10M HF02-10M HF03-10M HF04-10M HF05-10M1 HF-SG-NO1-1M (M6) HF-SG-NO2-1M (M6/M8/M10) HF-SG-NO3-1M (M6/M8/M10) HF-SG-NO4-1M (M10)2 HF-SG-NO1-2M (M6) HF-SG-NO2-2M (M6/M8/M10) HF-SG-NO3-2M (M6/M8/M10) HF-SG-NO4-2M (M10)3 HF-SG-NO1-3M (M6) HF-SG-NO2-3M (M6/M8/M10) HF-SG-NO3-3M (M6/M8/M10) HF-SG-NO4-3M (M10)4 HF-SG-NO1-4M (M6) HF-SG-NO2-4M (M6/M8/M10) HF-SG-NO3-4M (M6/M8/M10) HF-SG-NO4-4M (M10)5 HF-SG-NO1-5M (M6) HF-SG-NO2-5M (M6/M8/M10) HF-SG-NO3-5M (M6/M8/M10) HF-SG-NO4-5M (M10)

Stud (M6/M8/M10) 10 HF-SG-NO1-10M (M6) HF-SG-NO2-10M (M6/M8/M10) HF-SG-NO3-10M (M6/M8/M10) HF-SG-NO4-10M (M10)1 HF-TG-NO1-1M (6mm) HF-TG-NO2-1M (8mm) HF-TG-NO3-1M (10mm)2 HF-TG-NO1-2M (6mm) HF-TG-NO2-2M (8mm) HF-TG-NO3-2M (10mm)3 HF-TG-NO1-3M (6mm) HF-TG-NO2-3M (8mm) HF-TG-NO3-3M (10mm)4 HF-TG-NO1-4M (6mm) HF-TG-NO2-4M (8mm) HF-TG-NO3-4M (10mm)5 HF-TG-NO1-5M (6mm) HF-TG-NO2-5M (8mm) HF-TG-NO3-5M (10mm)

Toggle (6/8/10mm) 10 HF-TG-NO1-10M (6mm) HF-TG-NO2-10M (8mm) HF-TG-NO3-10M (10mm)

Snap hook

1 HF-HKG-NO1-1M HF-HKG-NO2-1M HF-HKG-NO3-1M2 HF-HKG-NO1-2M HF-HKG-NO2-2M HF-HKG-NO3-2M3 HF-HKG-NO1-3M HF-HKG-NO2-3M HF-HKG-NO3-3M4 HF-HKG-NO1-4M HF-HKG-NO2-4M HF-HKG-NO3-4M5 HF-HKG-NO1-5M HF-HKG-NO2-5M HF-HKG-NO3-5M10 HF-HKG-NO1-10M HF-HKG-NO2-10M HF-HKG-NO3-10M

Link hook

1 HF-NLG-NO1-1M HF-NLG-NO2-1M HF-NLG-NO3-1M2 HF-NLG-NO1-2M HF-NLG-NO2-2M HF-NLG-NO3-2M3 HF-NLG-NO1-3M HF-NLG-NO2-3M HF-NLG-NO3-3M4 HF-NLG-NO1-4M HF-NLG-NO2-4M HF-NLG-NO3-4M5 HF-NLG-NO1-5M HF-NLG-NO2-5M HF-NLG-NO3-5M10 HF-NLG-NO1-10M HF-NLG-NO2-10M HF-NLG-NO3-10M

Karabiner

1 HF-HLG-NO1-1M (6/60) HF-HLG-NO2-1M (6/60) HF-HLG-NO3-1M (8/80) 2 HF-HLG-NO1-2M (6/60) HF-HLG-NO2-2M (6/60) HF-HLG-NO3-2M (8/80) 3 HF-HLG-NO1-3M (6/60) HF-HLG-NO2-3M (6/60) HF-HLG-NO3-3M (8/80) 4 HF-HLG-NO1-4M (6/60) HF-HLG-NO2-4M (6/60) HF-HLG-NO3-4M (8/80) 5 HF-HLG-NO1-5M (6/60) HF-HLG-NO2-5M (6/60) HF-HLG-NO3-5M (8/80) 10 HF-HLG-NO1-10M (6/60) HF-HLG-NO2-10M (6/60) HF-HLG-NO3-10M (8/80)

22

Standard hanger

End fixing

• Kit comprises length of wire with End fixing (see pages 43 - 54) and Gripple fastener

Used to suspend a variety of mechanical and electrical services from different substrates

APPLICATION

PRODUCT FEATURES

END FIXING CHOICES

SizeEnd fixing

Can’t find a suitable product? Call 0800 0184264 (UK sales) for special and tailor-made solutions

http://www.gripple.com/products/catalogue/industrial/products/hanger-kits/

http://www.gripple.com/products/catalogue/industrial/products/hanger-kits/

http://www.gripple.com/products/catalogue/industrial/products/hanger-kits/end-fixings/loop-end-fixing.html

http://www.gripple.com/products/catalogue/industrial/products/hanger-kits/end-fixings/toggle.html

http://www.gripple.com/products/catalogue/industrial/products/hanger-kits/end-fixings/stud-end-fixing.html

http://www.gripple.com/products/catalogue/industrial/products/hanger-kits/end-fixings/snaphook.html

http://www.gripple.com/products/catalogue/industrial/products/hanger-kits/end-fixings/link-hook-end-fixing.html

Length(m)

No.10-10 kg

No.210-45 kg

No.345-90 kg

No.490-225 kg

No.5225-325 kg

1 HF-EYE02-1M HF-EYE03-1M2 HF-EYE02-2M HF-EYE03-2M3 HF-EYE02-3M HF-EYE03-3M4 HF-EYE02-4M HF-EYE03-4M5 HF-EYE02-5M HF-EYE03-5M

Eyelet 10 HF-EYE02-10M HF-EYE03-10M1 HF-SEYE45G-NO2-1M HF-SEYE45G-NO3-1M2 HF-SEYE45G-NO2-2M HF-SEYE45G-NO3-2M3 HF-SEYE45G-NO2-3M HF-SEYE45G-NO3-3M4 HF-SEYE45G-NO2-4M HF-SEYE45G-NO3-4M5 HF-SEYE45G-NO2-5M HF-SEYE45G-NO3-5M

45º Eyelet 10 HF-SEYE45G-NO2-10M HF-SEYE45G-NO3-10M1 HF-SEYE90G-NO1-1M HF-SEYE90G-NO2-1M HF-SEYE90G-NO3-1M2 HF-SEYE90G-NO1-2M HF-SEYE90G-NO2-2M HF-SEYE90G-NO3-2M3 HF-SEYE90G-NO1-3M HF-SEYE90G-NO2-3M HF-SEYE90G-NO3-3M4 HF-SEYE90G-NO1-4M HF-SEYE90G-NO2-4M HF-SEYE90G-NO3-4M5 HF-SEYE90G-NO1-5M HF-SEYE90G-NO2-5M HF-SEYE90G-NO3-5M

90º Eyelet 10 HF-SEYE90G-NO1-10M HF-SEYE90G-NO2-10M HF-SEYE90G-NO3-10M

End stop

1 HF-EG-NO1-1M HF-EG-NO2-1M HF-EG-NO3-1M2 HF-EG-NO1-2M HF-EG-NO2-2M HF-EG-NO3-2M3 HF-EG-NO1-3M HF-EG-NO2-3M HF-EG-NO3-3M4 HF-EG-NO1-4M HF-EG-NO2-4M HF-EG-NO3-4M5 HF-EG-NO1-5M HF-EG-NO2-5M HF-EG-NO3-5M10 HF-EG-NO1-10M HF-EG-NO2-10M HF-EG-NO3-10M1 HF-B6G-NO1-1M (M6) HF-BG-NO2-1M (M6/M8) HF-B8G-NO2-1M (M8)2 HF-B6G-NO1-2M (M6) HF-BG-NO2-2M (M6/M8) HF-B8G-NO2-2M (M8)3 HF-B6G-NO1-3M (M6) HF-BG-NO2-3M (M6/M8) HF-B8G-NO2-3M (M8)4 HF-B6G-NO1-4M (M6) HF-BG-NO2-4M (M6/M8) HF-B8G-NO2-4M (M8)5 HF-B6G-NO1-5M (M6) HF-BG-NO2-5M (M6/M8) HF-B8G-NO2-5M (M8)

Barrel (M6/M8) 10 HF-B6G-NO1-10M (M6) HF-BG-NO2-10M (M6/M8) HF-B8G-NO2-10M (M8)1 HF-B6G-NO1-1M-MAG1M62 HF-B6G-NO1-2M-MAG1M63 HF-B6G-NO1-3M-MAG1M64 HF-B6G-NO1-4M-MAG1M65 HF-B6G-NO1-5M-MAG1M6

Magnetic pad 10 HF-B6G-NO1-10M-MAG1M61 HF-HCG-NO2-1M2 HF-HCG-NO2-2M3 HF-HCG-NO2-3M4 HF-HCG-NO2-4M5 HF-HCG-NO2-5M

Cladding hook 10 HF-HCG-NO2-10M1 HF-DAWG-NO2-1M(M8) HF-DAWG-NO3-1M(M8)2 HF-DAWG-NO2-2M(M8) HF-DAWG-NO3-2M(M8)3 HF-DAWG-NO2-3M(M8) HF-DAWG-NO3-3M(M8)4 HF-DAWG-NO2-4M(M8) HF-DAWG-NO3-4M(M8)5 HF-DAWG-NO2-5M(M8) HF-DAWG-NO3-5M(M8)

Alphawedge 10 HF-DAWG-NO2-10M(M8) HF-DAWG-NO3-10M(M8)1 HF-DMW2G-NO2-1M(M8) HF-DMW2G-NO3-1M(M8)2 HF-DMW2G-NO2-2M(M8) HF-DMW2G-NO3-2M(M8)3 HF-DMW2G-NO2-3M(M8) HF-DMW2G-NO3-3M(M8)4 HF-DMW2G-NO2-4M(M8) HF-DMW2G-NO3-4M(M8)5 HF-DMW2G-NO2-5M(M8) HF-DMW2G-NO3-5M(M8)

Multiwedge 2 10 HF-DMW2G-NO2-10M(M8) HF-DMW2G-NO3-10M(M8)

TR60 wedge

1 HF-DTR60G-NO2-1M(M8) HF-DTR60G-NO3-1M(M8)2 HF-DTR60G-NO2-2M(M8) HF-DTR60G-NO3-2M(M8)3 HF-DTR60G-NO2-3M(M8) HF-DTR60G-NO3-3M(M8)4 HF-DTR60G-NO2-4M(M8) HF-DTR60G-NO3-4M(M8)5 HF-DTR60G-NO2-5M(M8) HF-DTR60G-NO3-5M(M8)10 HF-DTR60G-NO2-10M(M8) HF-DTR60G-NO3-10M(M8)

MF wedge

1 HF-DMFG-NO2-1M(M8) HF-DMFG-NO3-1M(M8)2 HF-DMFG-NO2-2M(M8) HF-DMFG-NO3-2M(M8)3 HF-DMFG-NO2-3M(M8) HF-DMFG-NO3-3M(M8)4 HF-DMFG-NO2-4M(M8) HF-DMFG-NO3-4M(M8)5 HF-DMFG-NO2-5M(M8) HF-DMFG-NO3-5M(M8)10 HF-DMFG-NO2-10M(M8) HF-DMFG-NO3-10M(M8)

25mm wedge

1 HF-DW25G-NO2-1M(M8) HF-DW25G-NO3-1M(M8)2 HF-DW25G-NO2-2M(M8) HF-DW25G-NO3-2M(M8)3 HF-DW25G-NO2-3M(M8) HF-DW25G-NO3-3M(M8)4 HF-DW25G-NO2-4M(M8) HF-DW25G-NO3-4M(M8)5 HF-DW25G-NO2-5M(M8) HF-DW25G-NO3-5M(M8)10 HF-DW25G-NO2-10M(M8) HF-DW25G-NO3-10M(M8)1 HF-C635LG-NO1-1M HF-C635LG-NO2-1M2 HF-C635LG-NO1-2M HF-C635LG-NO2-2M3 HF-C635LG-NO1-3M HF-C635LG-NO2-3M4 HF-C635LG-NO1-4M HF-C635LG-NO2-4M5 HF-C635LG-NO1-5M HF-C635LG-NO2-5MConcrete anchor 10 HF-C635LG-NO1-10M HF-C635LG-NO2-10M

Concrete anchor

1 HF-C6LG-NO1-1M HF-C6LG-NO2-1M2 HF-C6LG-NO1-2M HF-C6LG-NO2-2M3 HF-C6LG-NO1-3M HF-C6LG-NO2-3M4 HF-C6LG-NO1-4M HF-C6LG-NO2-4M5 HF-C6LG-NO1-5M HF-C6LG-NO2-5M10 HF-C6LG-NO1-10M HF-C6LG-NO2-10M

Size

End fixing

Other lengths are available on request, please contact our sales team.

23

Can’t find anything

suitable? Call us

on 0800 0184264

and let us do the

leg work

Need more information? Log on to www.gripple.com for technical information and media

http://www.gripple.com/products/catalogue/industrial/products/hanger-kits/end-fixings/barrel.html

http://www.gripple.com/products/catalogue/industrial/products/hanger-kits/end-fixings/magneticm6barrel.html

http://www.gripple.com/products/catalogue/industrial/products/hanger-kits/end-fixings/eyelet.html

http://www.gripple.com/products/catalogue/industrial/products/hanger-kits/end-fixings/45eyelet.html


http://www.gripple.com/products/catalogue/industrial/products/hanger-kits/end-fixings/alphawedge.html

http://www.gripple.com/products/catalogue/industrial/products/hanger-kits/end-fixings/multiwedge2.html

http://www.gripple.com/products/catalogue/industrial/products/hanger-kits/end-fixings/tr60wedge.html

http://www.gripple.com/products/catalogue/industrial/products/hanger-kits/end-fixings/endstop.html

http://www.gripple.com/products/catalogue/industrial/products/hanger-kits/end-fixings/cladhook.html

Length(m)

No.345-90 kg

1 HF-LG-TPZ-1M2 HF-LG-TPZ-2M3 HF-LG-TPZ-3M4 HF-LG-TPZ-4M5 HF-LG-TPZ-5M

Loop 10 HF-LG-TPZ-10M1 HF-SG-TPZ-1M (M6/M8/M10)2 HF-SG-TPZ-2M (M6/M8/M10)3 HF-SG-TPZ-3M (M6/M8/M10)4 HF-SG-TPZ-4M (M6/M8/M10)5 HF-SG-TPZ-5M ((M6/M8/M10)

Stud (M6, M8 or M10) 10 HF-SG-TPZ-10M (M6/M8/M10)1 HF-TG-TPZ-1M2 HF-TG-TPZ-2M3 HF-TG-TPZ-3M4 HF-TG-TPZ-4M5 HF-TG-TPZ-5M

Toggle (10mm) 10 HF-TG-TPZ-10M1 HF-HKG-TPZ-1M2 HF-HKG-TPZ-2M3 HF-HKG-TPZ-3M4 HF-HKG-TPZ-4M5 HF-HKG-TPZ-5M

Snap hook 10 HF-HKG-TPZ-10M1 HF-NLG-TPZ-1M2 HF-NLG-TPZ-2M3 HF-NLG-TPZ-3M4 HF-NLG-TPZ-4M5 HF-NLG-TPZ-5M

Link hook 10 HF-NLG-TPZ-10M

Eyelet

1 HF-EYE-TPZ-1M2 HF-EYE-TPZ-2M3 HF-EYE-TPZ-3M4 HF-EYE-TPZ-4M5 HF-EYE-TPZ-5M10 HF-EYE-TPZ-10M

24

Trapeze

• Kit comprises length of wire with End fixing attached and Trapeze fastener

• Slots easily in to strut• Pin allows easy adjustment and is removable• Load rated at 90kg with a 4:1 safety factor

Purpose-made single channel Gripple, ideal for multi-tiered installations

APPLICATION

PRODUCT FEATURES

END FIXING CHOICES

INSTALLATION

End fixing


SizeEnd fixing

Pin can be removed when installation is complete



http://www.gripple.com/products/catalogue/industrial/products/trapeze/trapeze.html

http://www.gripple.com/products/catalogue/industrial/products/trapeze/trapeze.html





Length(m)

No.345-90 kg

1 HF-SEYE45G-TPZ-1M2 HF-SEYE45G-TPZ-2M3 HF-SEYE45G-TPZ-3M4 HF-SEYE45G-TPZ-4M5 HF-SEYE45G-TPZ-5M

45º eyelet 10 HF-SEYE45G-TPZ-10M1 HF-SEYE90G-TPZ-1M2 HF-SEYE90G-TPZ-2M3 HF-SEYE90G-TPZ-3M4 HF-SEYE90G-TPZ-4M

90º eyelet 5 HF-SEYE90G-TPZ-5M10 HF-SEYE90G-TPZ-10M1 HF-B8G-TPZ-1M2 HF-B8G-TPZ-2M3 HF-B8G-TPZ-3M4 HF-S8G-TPZ-4M5 HF-S8G-TPZ-5M

Barrel (M8) 10 HF-S8G-TPZ-10M1 HF-HCG-TPZ-1M2 HF-HCG-TPZ-2M3 HF-HCG-TPZ-3M4 HF-HCG-TPZ-4M5 HF-HCG-TPZ-5M

Cladding hook* 10 HF-HCG-TPZ-10M1 HF-DAWG-TPZ-1M2 HF-DAWG-TPZ-2M3 HF-DAWG-TPZ-3M4 HF-DAWG-TPZ-4M5 HF-DAWG-TPZ-5M

Alphawedge 10 HF-DAWG-TPZ-10M1 HF-DMW2G-TPZ-1M2 HF-DMW2G-TPZ-2M3 HF-DMW2G-TPZ-3M4 HF-DMW2G-TPZ-4M5 HF-DMW2G-TPZ-5M

Multiwedge 2 10 HF-DMW2G-TPZ-10M1 HF-DTR60G-TPZ-1M2 HF-DTR60G-TPZ-2M3 HF-DTR60G-TPZ-3M4 HF-DTR60G-TPZ-4M5 HF-DTR60G-TPZ-5M

TR60 wedge 10 HF-DTR60G-TPZ-10M1 HF-W25G-TPZ-1M(M8)2 HF-W25G-TPZ-1M(M8)3 HF-W25G-TPZ-1M(M8)4 HF-W25G-TPZ-1M(M8)5 HF-W25G-TPZ-1M(M8)

25mm wedge 10 HF-W25G-TPZ-1M(M8)1 HF-C635LG-TPZ-1M2 HF-C635LG-TPZ-2M3 HF-C635LG-TPZ-3M4 HF-C635LG-TPZ-4M5 HF-C635LG-TPZ-5M

Concrete anchor 10 HF-C635LG-TPZ-10M1 HF-C6LG-TPZ-1M2 HF-C6LG-TPZ-2M3 HF-C6LG-TPZ-3M4 HF-C6LG-TPZ-4M5 HF-C6LG-TPZ-5M

Concrete anchor 10 HF-C6LG-TPZ-10M

SizeEnd fixing

25

Cable tray

Cable basket

Rectangular ducting


* Available April 2010







26

Y-fit hanger

• Two attachment points offer increased stability when compared with two separate hangers

• Available with all End fixing configurations• Available in different drop (dimension A)

and leg (dimension B) lengths• Final installation angle at the ferrule should

not exceed 60º

Single hanger with two attachment points at service level

APPLICATION

PRODUCT FEATURES

End fixing End fixing

LengthA (m)

No.10-10 kg

No.210 - 45 kg

B = 150 mm B = 300 mm B = 500 mm B = 150 mm B = 300 mm B = 500 mm

1 HF-YHKG-NO1-1M-150MM HF-YHKG-NO1-1M-300MM HF-YHKG-NO1-1M-500MM HF-YHKG-NO2-1M-150MM HF-YHKG-NO2-1M-300MM HF-YHKG-NO2-1M-500MM

2 HF-YHKG-NO1-2M-150MM HF-YHKG-NO1-2M-300MM HF-YHKG-NO1-2M-500MM HF-YHKG-NO2-2M-150MM HF-YHKG-NO2-2M-300MM HF-YHKG-NO2-2M-500MMSnap hook 3 HF-YHKG-NO1-3M-150MM HF-YHKG-NO1-3M-300MM HF-YHKG-NO1-3M-500MM HF-YHKG-NO2-3M-150MM HF-YHKG-NO2-3M-300MM HF-YHKG-NO2-3M-500MM

1 HF-YNLG-NO1-1M-150MM HF-YNLG-NO1-1M-300MM HF-YNLG-NO1-1M-500MM HF-YNLG-NO2-1M-150MM HF-YNLG-NO2-1M-300MM HF-YNLG-NO2-1M-500MM

2 HF-YNLG-NO1-2M-150MM HF-YNLG-NO1-2M-300MM HF-YNLG-NO1-2M-500MM HF-YNLG-NO2-2M-150MM HF-YNLG-NO2-2M-300MM HF-YNLG-NO2-2M-500MM

Link hook 3 HF-YNLG-NO1-3M-150MM HF-YNLG-NO1-3M-300MM HF-YNLG-NO1-3M-500MM HF-YNLG-NO2-3M-150MM HF-YNLG-NO2-3M-300MM HF-YNLG-NO2-3M-500MM

1 HF-YTG-NO1-1M-150MM HF-YTG-NO1-1M-300MM HF-YTG-NO1-1M-500MM HF-YTG-NO2-1M-150MM HF-YTG-NO2-1M-300MM HF-YTG-NO2-1M-500MM

2 HF-YTG-NO1-2M-150MM HF-YTG-NO1-2M-300MM HF-YTG-NO1-2M-500MM HF-YTG-NO2-2M-150MM HF-YTG-NO2-2M-300MM HF-YTG-NO2-2M-500MM

Toggle 3 HF-YTG-NO1-3M-150MM HF-YTG-NO1-3M-300MM HF-YTG-NO1-3M-500MM HF-YTG-NO2-3M-150MM HF-YTG-NO2-3M-300MM HF-YTG-NO2-3M-500MM

Other lengths and end fixing configurations are available on request, please contact our sales team.

If height Product recommendation

< 2 m Y-fit hanger (this page)

> 2 mY-fit accessory (p.28)

+ Standard hanger (p.22)

A ((

leng

th to

the

end

of th

e w

ire ro

pe)

B (le

g le

ngth

)

INSTALLATION

Size

End fixing

END FIXING CHOICES


Max 60º

http://www.gripple.com/products/catalogue/industrial/products/y-fits/y-fit.html





27

Cable basket Luminaires

Cable tray

Cable basket

Radiant heaters

No.345 - 90 kg

B = 150 mm B = 300 mm B = 500 mm

HF-YHKG-NO3-1M-150MM HF-YHKG-NO3-1M-300MM HF-YHKG-NO3-1M-500MM



HF-YNLG-NO3-1M-150MM HF-YNLG-NO3-1M-300MM HF-YNLG-NO3-1M-500MM



HF-YTG-NO3-1M-150MM HF-YTG-NO3-1M-300MM HF-YTG-NO3-1M-500MM




28

Y-fit accessory

• Accessory for attachment to a Standard hanger (p.22)

• Gripple adjustment at working height• Available with all End fixing configurations• Ideal for services requiring maintenance• Available in different leg lengths (dimension

B), 150mm, 300mm or 500mm• Recommended for drops in excess of 2m• Final installation angle at the ferrule should

not exceed 60º

Double attachment point accessory for use with a Standard hanger

APPLICATION

PRODUCT FEATURES

No.10-10 kg

No.210 - 45 kg

B = 150 mm B = 300 mm B = 500 mm B = 150 mm B = 300 mm B = 500 mm

Snap hook HF-AYHKG-NO1-150MM HF-AYHKG-NO1-300MM HF-AYHKG-NO1-500MM HF-AYHKG-NO2-150MM HF-AYHKG-NO2-300MM HF-AYHKG-NO2-500MM

Link hook HF-AYNLG-NO1-150MM HF-AYNLG-NO1-300MM HF-AYNLG-NO1-500MM HF-AYNLG-NO2-150MM HF-AYNLG-NO2-300MM HF-AYNLG-NO2-500MM

Toggle HF-AYTG-NO1-150MM HF-AYTG-NO1-300MM HF-AYTG-NO1-500MM HF-AYTG-NO2-150MM HF-AYTG-NO2-300MM HF-AYTG-NO2-500MM

Other lengths and end fixing configurations are available on request, please contact our sales team.

INSTALLATION

End fixing End fixing

END FIXING CHOICES

Size

End fixing


< 2 m Y-fit hanger (p.26)

> 2 mY-fit accessory (this page)+ Standard hanger (p.22)

B (le

g le

ngth

)


Max 60º

http://www.gripple.com/products/catalogue/industrial/products/y-fits/y-fit-accessory.html

http://www.gripple.com/products/catalogue/industrial/products/y-fits/y-fit-accessory.html




29

Cable basket

Radiant panel

Cable basket

Cable basket

Lighting

Air conditioning unit



Length (m)No.2

0-45 kgNo.3

45-90 kg

1 HF-YS8G-NO2-1M-0.2M-PH HF-YS8G-NO3-1M-0.2M-PH

Y-pipe 2 HF-YS8G-NO2-2M-0.2M-PH HF-YS8G-NO2-2M-0.2M-PH

3 HF-YS8G-NO2-3M-0.2M-PH HF-YS8G-NO2-3M-0.2M-PH

Y-pipe-r 1 HF2-YEYE45G-1M-0.1M-PH HF3-YEYE45G-1M-0.1M-PH

30

Y-pipe hanger

INSTALLATION

240

mm

Y-pipe hangerStandard hanger for the suspension of twin or triple pipes

• Allows quick fixing of pipe brackets to M8 Stud fixing

• One anchoring with double fixing point offers increased stability and cost efficiency

• The supporting plate creates a choice of spacing for pipes to be fitted at 100mm, 150mm and 200mm

APPLICATION

PRODUCT FEATURES

Designed to suspend twin runs of pipe,Ø 10 - 65mm (3/8”- 2”) plus up to 32mm of insulation on each pipe

135

mm

Y-pipe-r hangerFor installation closer to the ceiling in restricted access sites


< 2 m Y-pipe hanger or Y-pipe-r hanger (this page)

> 2 m Y-pipe accessory (p.32) + Standard hanger (p.22)

200 m

m


100 mm150 mm200 mm

http://www.gripple.com/products/catalogue/industrial/products/y-pipe-hangers/y-pipe-hanger.html



31

Plastic pipes

Insulated steel pipes

Plastic pipes

Plastic pipes

Metal pipes Metal piping



Length (m)No.2

0-45 kgNo.3

45-90 kg

Y-pipe accessory 285 mm HF-AYS8G-NO2-200MM-PH HF-AYS8G-NO3-200MM-PH

Y-pipe-r accessory 135 mm HF-AYE45G-NO2-100MM-PH HF-AYE45G-NO3-100MM-PH

32

Y-pipe accessory

• Allows quick fixing of pipe brackets to M8 stud fixing

• One anchoring with double fixing point offers increased stability and cost efficiency when compared with two single hangers

• The supporting plate creates a choice of spacing for pipes to be fitted at 100mm, 150mm and 200mm

• Y-pipe-r accessory is ideal for areas with restricted access ceiling height

PRODUCT FEATURES

285

mm

Standard hanger(p.22)

INSTALLATION

Y-pipe accessoryFor the suspension of twin or triple pipes

INSTALLATION

135

mm

Y-pipe-r accessoryFor installation closer to the ceiling restricted access sites

Standard hanger (p.22)


< 2 m Y-pipe hanger or Y-pipe-r hanger (p.30)

> 2 m Y-pipe accessory (this page) + Standard hanger (p.22)

200 m

m


APPLICATION

Designed to suspend twin runs of pipe,Ø 10 - 65mm (3/8”- 2”) plus up to 32mm of insulation on each pipe




33

Plastic pipes

PER pipes

Copper pipes Metal pipes and copper pipes

Plastic pipes

Metal pipes


34

G-bracket

• Cut from heavy gauge 3mm steel• Requires only one hole to be drilled for the

entire installation• Creates a well balanced and secure hanger• Can be joined together by stacking, or

positioning side by side and securing with coupling bolts

• For use with Y-fit hanger or Y-fit accessory with Snap hook End fixing

Bespoke hanger for cable tray and basket allowing easy loading and unloading of cables

APPLICATION

PRODUCT FEATURES

Code A (mm) B (mm) C (mm) Max SWLG100 185 115 99 0 - 30 kgG200 200 205 68 0 - 60 kgG300 200 325 68 0 - 45 kg

Max 60˚

INSTALLATION

Y-fit hanger (p.26)

Height Product recommendation

< 2 m Y-fit hanger (p.26) with Snap hook (p.46)

> 2 mY-fit accessory (p.28) with Snap hook (p.46) +

Standard hanger (p.22)

G-bracket

A C

B


G bracket

http://www.gripple.com/products/catalogue/industrial/products/y-fits/gripplegbracket.html


http://www.gripple.com/products/catalogue/industrial/products/y-fits/gripplegbracket.html

35

Double-tier cable basket

Single-tier cable basket

Single-tier cable tray Single-tier cable tray\

Two lengths of cable tray

Single-tier cable tray


Kit comprises length of wire rope and 2 x Lockable Gripple. Other lengths available on request.

36

Catenary (indoor)

• Eliminates the need for heavy and cumbersome materials such as strut and angle iron• Available in 3mm and 6mm wire rope diameters• Gripples have additional ‘locking screw’ to prevent movement in dynamic installations• Visually discreet • 6mm is ideal for use with the C-clip (p.38)• Easily tensioned using the Torq tensioning tool (p.60)• When looping round a beam, dimension B must always be equal to or greater than A

Creates a secure overhead span between two support structures

APPLICATION

PRODUCT FEATURES

INSTALLATION

3mm0-30 kg

6mm0-100kg

Torq tensioning tool

5 m 3MM-LOCK-2-5M-PACK 6MM-LOCK-2-5M-PACK





TOOL-5-SINGLE-LOCKABLE

Size

Length


A

B

http://www.gripple.com/products/catalogue/industrial/products/catenary/indoor/catenary.html

http://www.gripple.com/products/catalogue/industrial/products/catenary/indoor/catenary.html

http://www.gripple.com/products/catalogue/industrial/products/accessories/installation-tools/torq-tensioning-tool.html

37

Improved aesthetics in retail

Improved aesthetics in distribution centres Primary structure for spiral ducting

Primary structure for lighting


Improved aesthetics in retailImproved aesthetics in retail

Other lengths available on request, please contact our sales team.

38

C-clip

Length Code Description

1 HF02-1M-CCLIP-6MM

Kits comprise 1 length of 2mm wire rope with C-clip, for attachment to 6mm wire rope

and 1 x Gripple fastenerNo.2

0 - 45 kg

2 HF02-2M-CCLIP-6MM

3 HF02-3M-CCLIP-6MM

4 HF02-4M-CCLIP-6MM

5 HF02-5M-CCLIP-6MM

8 HF02-8M-CCLIP-6MM

10 HF02-10M-CCLIP-6MM

• Very quick to install and detach• Up to 10 times faster than a choke-knot alternative• Can be fitted retrospectively• Cams lock in place to eliminate movement even at angles• 45kg SWL at 5:1 safety factor

For use with indoor catenary (p.36). Suspends objects from a 6mm catenary wire. C-clip creates a vertical suspension from catenary wires angled up to 60º from horizontal.

APPLICATION

PRODUCT FEATURES

INSTALLATION

Size


http://www.gripple.com/products/catalogue/industrial/products/catenary/indoor/c-clip.html

http://www.gripple.com/products/catalogue/industrial/products/catenary/indoor/c-clip.html

39

Lighting Lighting

Suspension of lighting from catenary

Radiant panel Trunking

Overhead catenary support


Kit comprises length of wire rope and 2 x Lockable Gripple. Other lengths available on request.

40

Catenary (outdoor)

• Available in 6mm wire rope diameter• Ideal for horizontal installations to secure banners, lighting and decorations• Gripples have additional ‘locking screw’ to combat the effects of wind gallop (the only Gripple

product suitable for use in outdoor, dynamic installations)• Visually discreet • Easily tensioned using the Torq tensioning tool• Wall fixings are not available from Gripple

APPLICATION


Creates a secure overhead span between two support structures

PRODUCT FEATURES

APPLICATION

PRODUCT FEATURES

INSTALLATION

6mm0-100kg


5 m 6MM-LOCK-2-5M-PACK






Size

Length

http://www.gripple.com/products/catalogue/industrial/products/catenary/catenary-outdoor.html


http://www.gripple.com/products/catalogue/industrial/products/catenary/catenary-outdoor.html

41

Overhead catenary Overhead catenary

Christmas lighting

Decoration Public lighting

Advertising banners


42

Luminaires

End fixing

Length(m)

No.20-45 kg

No.345-90 kg

1 HF-IS-NO2-1M HF-IS-NO3-1M2 HF-IS-NO2-2M HF-IS-NO3-2M3 HF-IS-NO2-3M HF-IS-NO3-3M4 HF-IS-NO2-4M HF-IS-NO3-4M5 HF-IS-NO2-5M HF-IS-NO3-5M

Loop 10 HF-IS-NO2-10M HF-IS-NO3-10M1 HF-ISSS-NO2-1M-M6 HF-ISSS-NO3-1M-M62 HF-ISSS-NO2-2M-M6 HF-ISSS-NO3-2M-M63 HF-ISSS-NO2-3M-M6 HF-ISSS-NO3-3M-M64 HF-ISSS-NO2-4M-M6 HF-ISSS-NO3-4M-M65 HF-ISSS-NO2-5M-M6 HF-ISSS-NO3-5M-M6

M6 Stud 10 HF-ISSS-NO2-10M-M6 HF-ISSS-NO3-10M-M6

M8 Stud

1 HF-ISSS-NO2-1M-M8 HF-ISSS-NO3-1M-M82 HF-ISSS-NO2-2M-M8 HF-ISSS-NO3-2M-M83 HF-ISSS-NO2-3M-M8 HF-ISSS-NO3-3M-M84 HF-ISSS-NO2-4M-M8 HF-ISSS-NO3-4M-M85 HF-ISSS-NO2-5M-M8 HF-ISSS-NO3-5M-M810 HF-ISSS-NO2-10M-M8 HF-ISSS-NO3-10M-M8

Karabiner

1 HF-HLI-NO2-1M HF-HLI-NO3-1M2 HF-HLI-NO2-2M HF-HLI-NO3-2M3 HF-HLI-NO2-3M HF-HLI-NO3-3M4 HF-HLI-NO2-4M HF-HLI-NO3-4M5 HF-HLI-NO2-5M HF-HLI-NO3-5M10 HF-HLI-NO2-10M HF-HLI-NO3-10M


Stainless steel

• Stainless steel wire rope, Gripple housing and springs

• Ceramic locking wedges• Loop end fixing is 316L/A4 stainless steel• Stud end fixing is 304L/A2 stainless steel

For use in humid environments and areas subject to sanitisation, such as clean rooms

APPLICATION

PRODUCT FEATURES

END FIXING CHOICES

Air conditioning units

SizeEnd

fixing


http://www.gripple.com/products/catalogue/industrial/products/stainless-steel/stainless-steel-hangers.html

http://www.gripple.com/products/catalogue/industrial/products/stainless-steel/end-fixings/loop-stainless-steel.html

http://www.gripple.com/products/catalogue/industrial/products/stainless-steel/end-fixings/stud-end-fixing-stainless-steel.html

http://www.gripple.com/products/catalogue/industrial/products/stainless-steel/stainless-steel-hangers.html

http://www.gripple.com/products/catalogue/industrial/products/stainless-steel/end-fixings/stud-end-fixing-stainless-steel.html

43

End fixings

Loop, Stud, ToggleFor looping around beams, anchoring into concrete and brackets and fitting into cavities

Snap hook, Link hook, Karabiner, Cladding hookSnap-on attachments for clipping to brackets, light fittings, basket, tray, ladder and roof cladding

Eyelet, 45º Eyelet, 90º EyeletEasily attach to a variety of structures using suitable nuts and bolts

End stop, Barrel, Magnetic pad, 25mm wedgeFor channel fittings, threaded products, metal surfaces and metal decking

Concrete anchorsFor use in concrete. M6 in size

www.gripple.com

Composite decking fixingsPurpose made solutions for suspending from Richard Lees Steel Decking, Kingspan Structural Products, Structural Metal Decks (SMD) and Composite Metal Flooring (CMF) decking


suitable? Call us

on 0800 0184264

and let us do the

leg work

Richard Lees Steel Decking is a registered trade name, Company No. 421989Kingspan Metl-Con Limited trading as Kingspan Structural Products, Company No. 3263720Structural Metal Decks is a registered trade name, Company No. 03560591Composite Metal Flooring is a registered trade name, Company No. 05579683

44

Loop Stud

• For looping around purlins, beams, roof trusses and other accessible building features

• Simple choke-knot installation

• Stainess steel option available (p.42)

Other lengths are available on request

Length(m)

No.10-10kg

No.210-45 kg

No.345-90 kg

No.490-225kg

No.5225-325kg

1 HF01-1M HF02-1M HF03-1M HF01-1M HF05-1M

2 HF01-2M HF02-2M HF03-2M HF04-2M HF05-2M3 HF01-3M HF02-3M HF03-3M HF04-3M HF05-3M4 HF01-4M HF02-4M HF03-4M HF04-4M HF05-4M5 HF01-5M HF02-5M HF03-5M HF04-5M HF05-5M10 HF01-10M HF02-10M HF03-10M HF04-10M HF05-10M

A (mm) Drill size (mm) B (mm) C (mm)

M6 8 20 48

M8 10 45 70

M10 12 50 100

• For anchoring into concrete ceilings, metal decking and pressed metal brackets

• Supplied with drop-in anchors as standard or nuts on request

• Stainless steel option available in M6 and M8 (p.42)

A

B

Size A (mm) B (mm) C (mm) D (mm)

No.1 28 60 10 6

No.2 29 60 13 8

No.3 29 60 15 12

No.4 38 85 24 16

No.5 48 90 28 20

Length(m)

No.1 (M6)0-10kg

No.2 (M6/M8)*10-45 kg

No.3 (M8/M10)*

45-90 kg

No.4 (M10)*90-225kg

1 HF-SG-NO1-1M HF-SG-NO2-1M HF-SG-NO3-1M HF-SG-NO4-1M

2 HF-SG-NO1-2M HF-SG-NO2-2M HF-SG-NO3-2M HF-SG-NO4-2M3 HF-SG-NO1-3M HF-SG-NO2-3M HF-SG-NO3-3M HF-SG-NO4-3M4 HF-SG-NO1-4M HF-SG-NO2-4M HF-SG-NO3-4M HF-SG-NO4-4M5 HF-SG-NO1-5M HF-SG-NO2-5M HF-SG-NO3-5M HF-SG-NO4-5M

10 HF-SG-NO1-10M HF-SG-NO2-10M HF-SG-NO3-10M HF-SG-NO4-10M

C

D A

B

C


*Specify M6, M8 or M10 at time of ordering





45

• For fastening through profile cladding, light fittings, luminaires and other cavities

• Combines a plate and end stop for an ingeniously fast and simple fixing method

• Purpose designed to fit a specific hole diameter

Toggle

Length(m)

No.1 (6mm hole)0-10kg

No.2 (8mm hole)10-45 kg

No.3 (10mm hole)45-90 kg

1 HF-TG-NO1-1M HF-TG-NO2-1M HF-TG-NO3-1M

2 HF-TG-NO1-2M HF-TG-NO2-2M HF-TG-NO3-2M3 HF-TG-NO1-3M HF-TG-NO2-3M HF-TG-NO3-3M4 HF-TG-NO1-4M HF-TG-NO2-4M HF-TG-NO3-4M5 HF-TG-NO1-5M HF-TG-NO2-5M HF-TG-NO3-5M 10 HF-TG-NO1-10M HF-TG-NO2-10M HF-TG-NO3-10M

Size A (mm) B (mm) C (mm) D (mm) E (mm)

No.1 5.9 4.2 8 5.7 40

No.2 7.7 6.2 12 7.8 40

No.3 9.7 6.2 18 9.6 50

AB

C

D

E




46

Snap hook Link hook

• Snap-on attachment for clips, brackets and light fittings

• Ideal for cable basket and services requiring maintenance

• Safety factor 5:1


Length(m)

No.10-10kg

No.210-45 kg

No.345-90 kg

1 HF-HKG-NO1-1M HF-HKG-NO2-1M HF-HKG-NO3-1M

2 HF-HKG-NO1-2M HF-HKG-NO2-2M HF-HKG-NO3-2M3 HF-HKG-NO1-3M HF-HKG-NO2-3M HF-HKG-NO3-3M4 HF-HKG-NO1-4M HF-HKG-NO2-4M HF-HKG-NO3-4M5 HF-HKG-NO1-5M HF-HKG-NO2-5M HF-HKG-NO3-5M10 HF-HKG-NO1-10M HF-HKG-NO2-10M HF-HKG-NO3-10M

Size A (mm) B (mm) C (mm)

No.1 6.25 16 75

No.2 6.25 16 75

No.3 6.25 16 75

A (mm) B (mm) C (mm)

M6 20 48

M8 45 70

M10 50 100

Length(m)

No.10-10kg

No.210-45 kg

No.345-90 kg

1 HF-NLG-NO1-1M HF-NLG-NO2-1M HF-NLG-NO3-1M

2 HF-NLG-NO1-2M HF-NLG-NO2-2M HF-NLG-NO3-2M3 HF-NLG-NO1-3M HF-NLG-NO2-3M HF-NLG-NO3-3M4 HF-NLG-NO1-4M HF-NLG-NO2-4M HF-NLG-NO3-4M5 HF-NLG-NO1-5M HF-NLG-NO2-5M HF-NLG-NO3-5M10 HF-NLG-NO1-10M HF-NLG-NO2-10M HF-NLG-NO3-10M

A

B

C


• Ideal for cable basket, cable tray and services requiring maintenance


AB

C






47

A (mm) B (mm) C (mm)

M6 9 60

M8 9 80

Karabiner


• Stainless steel version available (p.42)

• Safety factor 5:1• No.1 and

No.2 come with M6/60 Karabiners and No.3 with M8/80 Karabiners as standard, other options available

A

B

C

Length(m)

No.1 (6/60)0-10kg

No.2 (6/60)10-45 kg

No.3 (8/80)45-90 kg

1 HF-HLG-NO1-1M HF-HLG-NO2-1M HF-HLG-NO3-1M

2 HF-HLG-NO1-2M HF-HLG-NO2-2M HF-HLG-NO3-2M3 HF-HLG-NO1-3M HF-HLG-NO2-3M HF-HLG-NO3-3M4 HF-HLG-NO1-4M HF-HLG-NO2-4M HF-HLG-NO3-4M5 HF-HLG-NO1-5M HF-HLG-NO2-5M HF-HLG-NO3-5M

10 HF-HLG-NO1-10M HF-HLG-NO2-10M HF-HLG-NO3-10M

Length(m)

No.1 (6/60)0-10kg

No.2 (6/60)10-45 kg

No.3 (8/80)45-90 kg

1 HF-HLI-NO1-1M HF-HLI-NO2-1M HF-HLI-NO3-1M

2 HF-HLI-NO1-2M HF-HLI-NO2-2M HF-HLI-NO3-2M3 HF-HLI-NO1-3M HF-HLI-NO2-3M HF-HLI-NO3-3M4 HF-HLI-NO1-4M HF-HLI-NO2-4M HF-HLI-NO3-4M5 HF-HLI-NO1-5M HF-HLI-NO2-5M HF-HLI-NO3-5M10 HF-HLI-NO1-10M HF-HLI-NO2-10M HF-HLI-NO3-10M

Stainless steel version

Standard hangers


Cladding hook


No.2 59 10 24

Length(m)

No.20-45 kg

1 HF-HCG-NO2-1M

2 HF-HCG-NO2-2M3 HF-HCG-NO2-3M4 HF-HCG-NO2-4M5 HF-HCG-NO2-5M10 HF-HGC-NO2-10M

A

• For fastening through roof cladding

• Designed to fit 6mm holes

• Safety factor 5:1• Suitable for

every grade of steel

• Creates a secure hanger

BC



48


Eyelet 45º Eyelet

• Easily attached to a variety of different substrates using suitable nuts and bolts



No.2 6.5 10 45

No.3 6.5 10 45

Length(m)

No.20-45 kg

No.345-90 kg

1 HF-EYE02-1M HF-EYE03-1M

2 HF-EYE02-2M HF-EYE03-2M3 HF-EYE02-3M HF-EYE03-3M4 HF-EYE02-4M HF-EYE03-4M5 HF-EYE02-5M HF-EYE03-5M10 HF-EYE02-10M HF-EYE03-10M

Length(m)

No.20-45 kg

No.345-90 kg

1 HF-SEYE45G-N02-1M HF-SEYE45G-N03-1M

2 HF-SEYE45G-N02-2M HF-SEYE45G-N03-2M3 HF-SEYE45G-N02-3M HF-SEYE45G-N03-3M4 HF-SEYE45G-N02-4M HF-SEYE45G-N03-4M5 HF-SEYE45G-N02-5M HF-SEYE45G-N03-5M10 HF-SEYE45G-N02-10M HF-SEYE45G-N03-10M


No.2 11.2 28.7 22.5

No.3 11.2 28.7 22.5

• Easily attached to a variety of different substrates using suitable nuts and bolts


B

C

A

B

C


A





49

90º Eyelet

Length(m)

No.10-10kg

No.210-45 kg

No.345-90 kg

1 HF-SEYE90G-N01-1M HF-SEYE90G-N02-1M HF-SEYE90G-N03-1M

2 HF-SEYE90G-N01-2M HF-SEYE90G-N02-2M HF-SEYE90G-N03-2M3 HF-SEYE90G-N01-3M HF-SEYE90G-N02-3M HF-SEYE90G-N03-3M4 HF-SEYE90G-N01-4M HF-SEYE90G-N02-4M HF-SEYE90G-N03-4M5 HF-SEYE90G-N01-5M HF-SEYE90G-N02-5M HF-SEYE90G-N03-5M

10 HF-SEYE90G-N01-10M HF-SEYE90G-N02-10M HF-SEYE90G-N03-10M


No.1 7.5 29 38

No.2 7.5 29 38

No.3 7.5 29 38

A B

C

• For fixing into concrete, steel and wood using gas and powder actuated tools or fixing screws

• Safety factor 5:1• Large version

with 11.2 mm hole available in a No.3




50

End stop Barrel

Length(m)

No.1(M6)0-10 kg

No.2 M6 (B6G) or M8 (B8G)

10-45 kg

No.3 (M8)45-90 kg

1 HF-B6G-NO1-1M HF-B6G/B8G-NO2-1M HF-B8G-NO3-1M

2 HF-B6G-NO1-2M HF-B6G/B8G-NO2-2M HF-B8G-NO3-2M3 HF-B6G-NO1-3M HF-B6G/B8G-NO2-3M HF-B8G-NO3-3M4 HF-B6G-NO1-4M HF-B6G/B8G-NO2-4M HF-B8G-NO3-4M5 HF-B6G-NO1-5M HF-B6G/B8G-NO2-5M HF-B8G-NO3-5M10 HF-B6G-NO1-10M HF-B6G/B8G-NO2-10M HF-B8G-NO3-10M


M6 6 12 45

M8 8 12 45


No.1 4.2 5.9 8

No.2 6.2 7.7 12

No.3 6.2 9.7 18

Length(m)

No.10-10kg

No.210-45 kg

No.345-90 kg

1 HF-EG-NO1-1M HF-EG-NO2-1M HF-EG-NO3-1M

2 HF-EG-NO1-2M HF-EG-NO2-2M HF-EG-NO3-2M3 HF-EG-NO1-3M HF-EG-NO2-3M HF-EG-NO3-3M4 HF-EG-NO1-4M HF-EG-NO2-4M HF-EG-NO3-4M5 HF-EG-NO1-5M HF-EG-NO2-5M HF-EG-NO3-5M10 HF-EG-NO1-10M HF-EG-NO2-10M HF-EG-NO3-10M


• Easy, slide-in fixing method

• Suitable for lighting channel, lighting track and other channel fixtures

• Suitable forchannel sizes 6mm, 8mm and 10mm


• Aesthetically pleasing fixing method

• Ideal for signage and lightweight fixtures

• Suitable for any 6mm or 8mm male-threaded product

• Safety factor 5:1• Ideal for use

with the T-bar twist clip (p.58)

A B

C

A B

C


(See page 58 for T-bar twist clip)





51

Magnetic pad

Length(m)

No.10-10kg

1 HF-B6G-NO1-1M-MAG1M6

2 HF-B6G-NO1-2M-MAG1M63 HF-B6G-NO1-3M-MAG1M64 HF-B6G-NO1-4M-MAG1M65 HF-B6G-NO1-5M-MAG1M610 HF-B6G-NO1-10M-MAG1M6


No.1 25 8 45

• For attachment to metal surfaces

• Ideal for signage• Safety factor 2:1• Tensile strength

may reduce depending on the metal’s thickness or painted finish

• Not for use on aluminium or brass or non-metallic products

• Not for use in temperatures in excess of 80ºC

A

B

C


C

A B

• Designed for a range of different decking

• Safety factor 5:1• Available also

with 18mm and 20mm wedges

• 40mm penny washer must be on the exterior of the decking and nut tightened to secure the installation

Size A (mm) B (mm) C (mm) D (mm)

No.2 8 25 48 40

No.3 8 25 48 40

Length(m)

No.20-45 kg

No.345-90 kg

1 HF-W25G-NO2-1M(M8) HF-W25G-NO3-1M(M8)

2 HF-W25G-NO2-2M(M8) HF-W25G-NO3-2M(M8)3 HF-W25G-NO2-3M(M8) HF-W25G-NO3-3M(M8)4 HF-W25G-NO2-4M(M8) HF-W25G-NO3-4M(M8)5 HF-W25G-NO2-5M(M8) HF-W25G-NO3-5M(M8)10 HF-W25G-NO2-10M(M8) HF-W25G-NO3-10M(M8)

D

25mm wedge



Length(m)

No.20-45 kg

No.345-90 kg

1 HF-DAWG-NO2-1M(M8) HF-DAWG-NO3-1M(M8)

2 HF-DAWG-NO2-2M(M8) HF-DAWG-NO3-2M(M8)3 HF-DAWG-NO2-3M(M8) HF-DAWG-NO3-3M(M8)4 HF-DAWG-NO2-4M(M8) HF-DAWG-NO3-4M(M8)5 HF-DAWG-NO2-5M(M8) HF-DAWG-NO3-5M(M8)

10 HF-DAWG-NO2-10M(M8) HF-DAWG-NO3-10M(M8)


No.2 8 45 70

No.3 8 45 70


No.2 8 45 70

No.3 8 45 70

Length(m)

No.20-45 kg

No.345-90 kg

1 HF-DMW2G-NO2-1M(M8) HF-DMW2G-NO3-1M(M8)

2 HF-DMW2G-NO2-2M(M8) HF-DMW2G-NO3-2M(M8)3 HF-DMW2G-NO2-3M(M8) HF-DMW2G-NO3-3M(M8)4 HF-DMW2G-NO2-4M(M8) HF-DMW2G-NO3-4M(M8)5 HF-DMW2G-NO2-5M(M8) HF-DMW2G-NO3-5M(M8)10 HF-DMW2G-NO2-10M(M8) HF-DMW2G-NO3-10M(M8)

Alphawedge Multiwedge 2

52

Composite decking fixings

• For Kingspan Structural Products, types Multideck® 60 and 80

• Safety factor 3:1• No need for

power tools or to drill

• Designed in collaboration with manufacturer, to create a secure fixing method

• For Richard Lees Steel Decking Ltd, types Ribdeck® AL, E60 and 80

• Safety factor 3:1• Maintains

the structural integrity of the decking

• Height is adjusted easily using the Gripple

AA

B B

CC


Ribdeck is a registered trademark of Richard Lees Steel Decking Ltd Multideck is a registered trademark of Kingspan Holdings (IRL) Limited






No.2 8 45 70

No.3 8 45 70

Length(m)

No.20-45 kg

No.345-90 kg

1 HF-DTR60G-NO2-1M(M8) HF-DTR60G-NO3-1M(M8)

2 HF-DTR60G-NO2-2M(M8) HF-DTR60G-NO3-2M(M8)3 HF-DTR60G-NO2-3M(M8) HF-DTR60G-NO3-3M(M8)4 HF-DTR60G-NO2-4M(M8) HF-DTR60G-NO3-4M(M8)5 HF-DTR60G-NO2-5M(M8) HF-DTR60G-NO3-5M(M8)10 HF-DTR60G-NO2-10M(M8) HF-DTR60G-NO3-10M(M8)

TR60 wedge

53

• For Structural Metal Decks (SMD®), decking types TR60 and TR80

• Safety factor 3:1• Ideal alternative

to shot-firing or drilling decking, which can damage the structure and overall strength

• Easy to re-position

A

B

C C

A

B

• For Composite Metal Flooring decking types Met-floor® 60 and 80

• Safety factor 3:1• Fast and simple

installation, no power tools required

• Service height is adjusted easily using the Gripple

Length(m)

No.20-45 kg

No.345-90 kg

1 HF-DMFG-NO2-1M(M8) HF-DMFG-NO3-1M(M8)

2 HF-DMFG-NO2-2M(M8) HF-DMFG-NO3-2M(M8)3 HF-DMFG-NO2-3M(M8) HF-DMFG-NO3-3M(M8)4 HF-DMFG-NO2-4M(M8) HF-DMFG-NO3-4M(M8)5 HF-DMFG-NO2-5M(M8) HF-DMFG-NO3-5M(M8)10 HF-DMFG-NO2-10M(M8) HF-DMFG-NO3-10M(M8)

MF wedge



No.2 8 45 70

No.3 8 45 70

and

Met-floor is a registered trade mark of Composite Metal Flooring LimitedSMD is a registered trademark of Structural Metal Decks Limited



Length(m)

No.10-10 kg

No.210-45 kg

1 HF-C635LG-NO1-1M HF-C635LG-NO2-1M

2 HF-C635LG-NO1-2M HF-C635LG-NO2-2M3 HF-C635LG-NO1-3M HF-C635LG-NO2-3M4 HF-C635LG-NO1-4M HF-C635LG-NO2-4M5 HF-C635LG-NO1-5M HF-C635LG-NO2-5M10 HF-C635LG-NO1-10M HF-C635LG-NO2-10M

Size A B (mm) C (mm)

No.1 M6 54 35

No.2 M6 54 35

Length(m)

No.10-10 kg

No.210-45 kg

1 HF-C6LG-NO1-1M HF-C6LG-NO2-1M

2 HF-C6LG-NO1-2M HF-C6LG-NO2-2M3 HF-C6LG-NO1-3M HF-C6LG-NO2-3M4 HF-C6LG-NO1-4M HF-C6LG-NO2-4M5 HF-C6LG-NO1-5M HF-C6LG-NO2-5M10 HF-C6LG-NO1-6M HF-C6LG-NO2-10M

Concrete anchors

Size A B (mm) C (mm)

No.1 M6 65 50

No.2 M6 65 50

54


A

B

C

• For use in concrete

• Safety factor 3:1• Small anchorage

depth of 35mm• ETAG approved• Suitable for

use in cracked concrete

• F90 Fire Resistance classification

• For use in concrete

• Safety factor 3:1• Self-expanding

when under load

• Easy and fast to install, simply drill and hammer in

A

B

C


Accessory fixings

55

6mm, 8mm and 10mm holesSpring clip, M6 & M8 adaptor, Pigtail anchor bolts, Wedge nut and T-Bar twist clip

ConcreteDrop-in anchor, Wire anchor, Concrete anchor, Concrete screw, Concrete screw anchor and Ceiling clip

WoodCeiling clip for wood and Wood screw anchor

Beams & purlins, Eyebolt & turnbuckleTiger clip, Beam clip, Vertical flange clip, Purlin clip, Z purlin clip, Eyebolt and Turnbuckle

Tools & other accessoriesSetting keys, Protective sleeving, Sleeve cutter, Wire rope cutter, Decor cover, Twister, Torq tensioning tool, Corner saddle, Ceiling fixing kit and Work belt


suitable? Call us

on 0800 0184264

and let us do the

leg work

56

Concrete

Code A (mm) B (mm) C (mm) Max SWL Quantity Hole Ø Hole depthHF-DROPIN-ANCHOR-M6 6 11 30 90 kg 10 8 mm 32 mmHF-DROPIN-ANCHOR-M8 8 13 30 90 kg 10 10 mm 33 mmHF-DROPIN-ANCHOR-M10 10 16 40 225 kg 10 12 mm 43 mm

Drop-in anchor

• For non-cracked concrete• ETAG approved• 5:1 safety factor• Easy installation with

setting punch or tool:HF-SET-PUNCH-M6HF-SET-PUNCH-M8HF-SET-PUNCH-M10

Wire anchor

• CSTB test report• Made from high tensile

stainless steel• 3:1 safety factor• Use with a loop end (p.44)• Easy installation with tool:

HF-WIRE-ANCHOR-TOOL

Concrete anchor

• Expands when under load• 3:1 safety factor

Concrete anchor

• ETAG approved• Suitable for cracked

concrete• F90 fire resistance• 3:1 safety factor

Concrete screw

• Quick and easy operation• Anchor is driven directly in

to base material• Max load of 100kg in

C20/25 concrete• Drill a pilot hole to 6mm

and a depth of 35mm

B

A

C

A

C

B

C

A

B

A

BC

A

B C

Code A (mm) B (mm) C (mm) Max SWL Quantity Hole Ø Hole depthHF-WIRE-ANCHOR 13.4 50 20 75 kg 100 8 mm 30 mm

Code A (mm) B (mm) C (mm) Max SWL Quantity Hole Ø Hole depthHF-CONCANC-35MM-M6 6 54 35 53 kg 100 6 mm 35 mm

Code A (mm) B (mm) C (mm) Max SWL Quantity Hole Ø Hole depthHF-CWH6 6 65 50 45 kg 100 6 mm 50 mm

Code A (mm) B (mm) C (mm) Max SWL Quantity Hole Ø Hole depthHF-CONC-SCREW-7.5X35 7.5 40 35 100 kg 100 6 mm 35 mm


http://www.gripple.com/products/catalogue/industrial/products/accessories/fixing-solutions/drop-in-anchor.html

http://www.gripple.com/products/catalogue/industrial/products/accessories/installation-tools/setting-punch.html

http://www.gripple.com/products/catalogue/industrial/products/accessories/installation-tools/mechanical-setting-tool.html

http://www.gripple.com/products/catalogue/industrial/products/accessories/fixing-solutions/drop-in-anchor.html

http://www.gripple.com/products/catalogue/industrial/products/accessories/fixing-solutions/wire-anchor.html

http://www.gripple.com/products/catalogue/industrial/products/accessories/fixing-solutions/concrete-anchor.html


http://www.gripple.com/products/catalogue/industrial/products/accessories/fixing-solutions/concrete-screw.html

http://www.gripple.com/products/catalogue/industrial/products/accessories/fixing-solutions/wire-anchor.html

http://www.gripple.com/products/catalogue/industrial/products/accessories/installation-tools/wire-anchor-tool.html



http://www.gripple.com/products/catalogue/industrial/products/accessories/fixing-solutions/concrete-screw.html

57

Concrete & Wood

Ceiling clip for wood

• Weight loadings depend on the type of wood

• Loop end (p.44) engages into the valley of the clip

• Tool for easy installation:HF-SOCKET-6.5MM

Wood screw anchor

• Ideal for use with No.1 M6 barrel hanger kits

• Weight loadings are dependent on the wood being screwed into and are not guaranteed

Concrete screw anchor

• Quick and easy operation• Anchor is driven directly in

to base material• Max load of 100kg in

C20/25 concrete• Drill a pilot hole to 6 mm

and a depth of 45 mm

Ceiling clip

• For shot-firing into concrete or steel

• Loop end (p.44) engages into the valley of the clip, allowing pivotal movement once installed

Ceiling clip

• For screwing into concrete• Loop end (p.44) engages

into the valley of the clip, allowing pivotal movement once installed

A

B

C

A

B

C

A

B

C

A

B

C

A

BC

Code A (mm) B (mm) C (mm) Max SWL Quantity Hole Ø Hole depthHF-CONC-SCREW-ANC-M8 7.5 47 23 100 kg 100 6 mm 45 mm

Code A (mm) B (mm) C (mm) Max SWL Quantity Material firing intoHF-CLIP-P19 15 32 19 90 kg 10 SteelHF-CLIP-P32 15 32 32 90 kg 10 Concrete

Code A (mm) B (mm) C (mm) Quantity Hole Ø Hole depthHF-CLIP-M45 15 31 45 10 8 mm 45 mm

Code A (mm) B (mm) C (mm) D (mm) Quantity Hole ØHF-CLIP-W32 15 32 32 6 10 5 mm

Code A (mm) B (mm) C (mm) Quantity Hole ØHF-WOOD-SCREW-ANC-M6 6 50 10 100 5 mm


http://www.gripple.com/products/catalogue/industrial/products/accessories/fixing-solutions/concrete-screw-anchor.html

http://www.gripple.com/products/catalogue/industrial/products/accessories/fixing-solutions/ceilingclips.html




http://www.gripple.com/products/catalogue/industrial/products/accessories/installation-tools/fixing-tool.html

http://www.gripple.com/products/catalogue/industrial/products/accessories/fixing-solutions/concrete-screw-anchor.html



58

6mm, 8mm and 10mm holes

Code A (mm) B (mm) Max SWL QuantityHF-SPRINGCLIP-6-8MM 24 38 45 kg 100HF-SPRINGCLIP-10MM 24 38 45 kg 100

Spring clip

• For services with 6 mm to 10 mm holes

• Spring action prevents pull-out

• 3:1 safety factor• For use on busbar, high- bay and strip lighting M6 & M8 adaptor

• For services with 6 mm or 8 mm holes

• Comes with corresponding serrated nut

• 5:1 safety factor• Can be fixed to concrete

using a drop-in anchor (p.56)

Code A (mm) B (mm) C (mm) D (mm) Max SWL QuantityHF-ADAPTOR-UNIT-M6 3.5 6 20 27 90 kg 10HF-ADAPTOR-UNIT-M8 5.5 8 25 37 225 kg 10

Code A (mm) B (mm) C (mm) Max SWL QuantityHF-PIGTAIL-20MM-M6 6 20 106 90 kg 10HF-PIGTAIL-25MM-M8 6 45 118 90 kg 10HF-PIGTAIL-45MM-M8 8 45 118 150 kg 10

Pigtail anchor bolt

• For fast and secure fixing of Loop (p.44)

• 5:1 safety factor• Does not include drop-in

anchor (p.56)• Ideal for signage and

banners

Code A (mm) B (mm) Max SWL QuantityHF-WEDGE-ANC-18MM-M8 6 18 90 kg 10HF-WEDGE-ANC-20MM-M6 6 20 180 kg 10HF-WEDGE-ANC-20MM-M8 8 20 200 kg 10HF-WEDGE-ANC-25MM-M6 6 25 180 kg 10HF-WEDGE-ANC-25MM-M8 8 25 200 kg 10

Wedge nut

• For fastening quickly and securely into decking

• 5:1 safety factor• Available in M6, M8 or M10• Ideal for use with Stud

(p.44) or Adaptor bolt

Code A (mm) B (mm) C (mm) Max SWL QuantityHF-TBAR-CLIP-M6 6 25 16 22 kg 100

B

T-bar twist clip

• M6 Twist clip for supporting fittings, etc. below the ceiling grid

• 3:1 safety factor• Suitable for use with

Barrel (p.50)

BA

A

B

C

D

A

B

C

AB

B

A

C


http://www.gripple.com/products/catalogue/industrial/products/accessories/fixing-solutions/spring-clip.html

http://www.gripple.com/products/catalogue/industrial/products/accessories/fixing-solutions/spring-clip.html

http://www.gripple.com/products/catalogue/industrial/products/accessories/fixing-solutions/m6m8adaptor.html

http://www.gripple.com/products/catalogue/industrial/products/accessories/fixing-solutions/m6m8adaptor.html

http://www.gripple.com/products/catalogue/industrial/products/accessories/fixing-solutions/pigtailanchorbolts.html

http://www.gripple.com/products/catalogue/industrial/products/accessories/fixing-solutions/pigtailanchorbolts.html

http://www.gripple.com/products/catalogue/industrial/products/accessories/fixing-solutions/wedge-nuts.html

http://www.gripple.com/products/catalogue/industrial/products/accessories/fixing-solutions/wedge-nuts.html

http://www.gripple.com/products/catalogue/industrial/products/accessories/fixing-solutions/t-bar-twist-clip.html

http://www.gripple.com/products/catalogue/industrial/products/accessories/fixing-solutions/t-bar-twist-clip.html

59

Beams & purlins

Code A (mm) B (mm) C (mm) D (mm) Max SWL QuantityEYEBOLT-M8-200MM-98MM 8 15 98 230 325 kg 10EYEBOLT-M8-130MM-F/THR 8 14 130 168 325 kg 10EYEBOLT-M8-0.2M-F/THR 8 15 190 230 325 kg 10

EYEBOLT- M10-200MM-98MM 10 15 98 230 325 kg 10EYEBOLT-M10-130MM-F/THR 10 14 130 174 325 kg 10EYEBOLT-M10-0.2M-F/THR 10 15 190 230 325 kg 10

Eyebolt

• Available in a wide variety of sizes, lengths and thread lengths to suit a variety of applications

• 5:1 safety factor• Available in M8 or M10• Available fully threaded or

partially threaded

Tiger clip & Beam clip

• Available in a variety of sizes to attach to different beam thicknesses

• 5:1 safety factor• Easy to install, simply

hammer on

Vertical flange clip

• Available in two sizes to suit thicknesses 1 to 7 mm

• 5:1 safety factor

Purlin clip

• Suitable for purlins of thickness 15mm

• 5:1 safety factor

Z purlin clip

• Suitable for purlins of thickness 2 mm to 5 mm

Code A (mm) B (mm) C (mm) Max SWL QuantityHF-TIGERCLIP-2-8 6.7 2 to 8 30 90 kg 100

HF-TIGERCLIP-8-26 6.7 8 to 16 38 90 kg 100

Code A (mm) B (mm) C (mm) Max SWL QuantityHF-GCB24 6.5 2 to 4 29 72 kg 100HF-GCB59 6.5 5 to 9 32 90 kg 100

HF-GCB1016 6.5 10 to 16 42 90 kg 100HF-GCB1720 6.5 17 to 20 48 90 kg 100

Code A (mm) B (mm) C (mm) Max SWL QuantityHF-GCVF15 6.5 19 50 72 kg 100HF-GCVF57 6.5 19 50 72 kg 100

Code A (mm) B (mm) C (mm) D (mm) Max SWL QuantityHF-GCP45 6.5 15 19 45 20 kg 100

Code A (mm) B (mm) C (mm) Max SWL QuantityHF-GCZP48 6.5 2 to 5 64 45 kg 100

A

B

C

D

A

B

D

A

B C

D

A

B

C

A

BC

A

B C

Eyebolt & turnbuckle

Turnbuckle

• For cold room panels• 5:1 safety factor• Available in 8 mm and

10 mm diameter• Available in thread length

80 mm and 200 mm

Code A (mm) B (mm) C (mm) Max SWL QuantityHF-T/BKLE-R80E130-M8 8 14 80 325 kg 10HF-T/BKLE-R200E130-M8 8 14 200 325 kg 10HF-T/BKLE-R200E130-M10 10 14 200 325 kg 10A

B

C


http://www.gripple.com/products/catalogue/industrial/products/accessories/fixing-solutions/eyebolts.html


http://www.gripple.com/products/catalogue/industrial/products/accessories/fixing-solutions/beampurlinclips.html


http://www.gripple.com/products/catalogue/industrial/products/accessories/fixing-solutions/tiger-clip.html



http://www.gripple.com/products/catalogue/industrial/products/accessories/fixing-solutions/tiger-clip.html






Adjustment key

• For use with Gripple kits

Key for No.1-No.3KEY-GP/FLAG

Key for No.4-No.5 and Catenary

KEY-HF-LOGO-NO4/NO5

Small cutter (No.1-No.4)

CUTTER-GRIPPLE

Large cutter (No.4-No.5 and Catenary)

CUTTER-GRIPPLE-6MM

Protective sleeving• To create a barrier against adverse reactions

between dissimilar metals

Wire rope cutter

• To trim excess wire rope

Aesthetic products

• To improve aesthetics of hanger installations

Decor cover (for painting)

HF-DECOR-COVER-NO2HF-DECOR-DOVER-NO3

Twister (tidies tail wires)for No.2 and No.3

TWIST-100BB

Protective sleeving HF-SLEEVE-2MM (25M)HF-SLEEVE-3MM (25M)

Sleeve cutter CUTTER-HOSE

Corner saddle

• To prevent friction on rectangular ducting

Decor cover and Work belt

• To be used with Gripple hangers

HF-CORNER-SADDLE (Standard)HF-CORNER-SADDLE-MAG (Magnetic)

Ceiling fixing kit for No.1 hangers

HF-CEILING COVER


• Quickly and accurately tensions wire rope

Suitable for No.4-No.6Delivers up to 400kg of load with minimal effort


Work belt

WORKBELT-CANVAS

60

Tools & other accessories


http://www.gripple.com/products/catalogue/industrial/products/accessories/installation-tools/setting-key.html

http://www.gripple.com/products/catalogue/industrial/products/accessories/installation-tools/flagkey.html

http://www.gripple.com/products/catalogue/industrial/products/accessories/installation-tools/wire-rope-cutter.html

http://www.gripple.com/products/catalogue/industrial/products/accessories/installation-tools/large-cutter.html

http://www.gripple.com/products/catalogue/industrial/products/accessories/decorative-products/protective-sleeve-tubing.html

http://www.gripple.com/products/catalogue/industrial/products/accessories/decorative-products/decor-cover.html

http://www.gripple.com/products/catalogue/industrial/products/accessories/installation-tools/sleeve-tube-cutter.html

http://www.gripple.com/products/catalogue/industrial/products/accessories/fixing-solutions/corner-saddles.html

http://www.gripple.com/products/catalogue/industrial/products/accessories/decorative-products/ceiling-fixing-kit.html


http://www.gripple.com/products/catalogue/industrial/products/accessories/installation-tools/workbelt.html

http://www.gripple.com/products/catalogue/industrial/products/accessories/decorative-products/twister.html

Environment: Do not use standard Gripple hangers in saturated humidity or chlorinated atmospheres; only stainless steel hangers should be considered for installations in these environments in accordance with construction industry guidelines, as long as efficient ventilation and air exchange systems are in place. Use standard Gripple hangers in dry and air conditioned environments only.

Loads: Always operate the product within its stated safe working load range.

Lifting: Do not use for lifting, such as in a crane or pulley situation.

Movement: Do not use Gripple hangers to hang moving services, or objects subjected to a sudden, repeated dynamic movement. Gripple hangers and associated accessories are purpose designed for hanging statically positioned mechanical, HVAC and electrical services only and should not be used for any other purpose.

Joining: Do not join two lengths together to create a longer assembly by splicing with a Gripple or other device. A Gripple hanger must comprise of one Gripple fastener and one length of cable (wire rope).

Painting: Do not paint the Gripple fastener. Ensure that the Gripple is in its final position and protected with the décor cover prior to applying any paint to the wire rope assembly. Do not move the Gripple fastener after painting.

Lubrication: Do not apply oil or any other lubricant to the Gripple or any other part of the assembly.

Re-use: Gripple hangers may be adjusted and refitted during the course of an original and primary installation. Should the product be subsequently dismantled at a later date, with the intention of forming a brand new installation, then a aspects of the product, including the locking mechanism should be inspected for signs of damage and wear and tear, and if detected, discarded.

Wire fraying: Prior to assembly, remove any frayed or damaged end on the cable/wire rope using a Gripple wire rope cutter.

Hanging at an angle: Ensure that the load calculation takes into account the effect of ‘side load’ when hanging at an angle to vertical. An angle of 60 degrees to vertical should not be exceeded; at this angle the safe working load is reduced by 50%. See page 8 for further guidance on hanging loads at angles, and the effect on the safe working load.

Adjustment: The setting key is a convenient way of disengaging the lock in the Gripple to lengthen the hanger. If the Gripple has been pushed on too far, it can be brought back using the key, but before the load is applied to the hanger. If the load has already been applied it should be supported independently to allow the key to be operated safely.

Building codes: Compliance with local codes is the buyer’s and/or installer’s responsibility.

Y-fits: When installing “Y-fit” double leg hangers, the final inclusive angle at the ferrule should not exceed 60 degrees.

Ducting: When installing wrap around hangers on round/spiral ducting or pipes, the final inclusive angle of the assembly should not exceed 60 degrees.

Stainless steel: In high corrosion environments, inspect installations periodically for any signs of damage. Any corroded materials should be replaced as necessary.

Chlorinated atmospheres: In such unstable and unpredictable environments great care should be taken when selecting all materials. Extensive consultation should be made by the contractor or client with specifying engineers prior to product selection and installation. Best practice recommends that after completion, installed services and support materials be inspected at least annually.

Toggles: Toggles should be matched by size to the following hole diameters, for maximum strength.

No.1 - 6mm ø hole

No.2 - 8mm ø hole

No.3 - 10mm ø hole

Studs: Stud kits are supplied with drop-in anchors. For optimum performance, the correct drill sizes and hole depths should be adhered to, as follows:

No.1 - 6mm ø hole

No.2 - 8mm ø hole

No.3 - 10mm ø hole

Manufacturer’s recommendationsFailure to comply with these recommendations may result in product malfunction and possible damage to property or person and will invalidate the Gripple warranty. Gripple products are warranted to conform to

the manufacturer’s published specifications at the time of shipment and to be free from defects in materials and workmanship. No other warranty, whether express or implied, including any warranty of merchantability

or fitness for purpose shall exist in connection with the sale or use of any Gripple product.

Full technical information and installation instructions can be obtained from www.gripple.com

61

62

Notes

Notes

63

64

Notes

Notes

65

66

Notes

Notes

67

68

Notes

Notes

69

[email protected]

Gripple® Ltd (Headquarters)The Old West Gun WorksSavile Street EastSheffieldS4 7UQ

Tel: 0800 018 4264 (UK Sales) +44 (0)114 275 2255 (Export Sales)Fax: +44 (0) 0114 275 1155

Gripple® Europe S.à.r.l1, rue du commerceBP 3767211 Obernai CedexFranceTél : +33 (0)3 88 95 44 95Fax : +33 (0)3 88 95 08 78

Gripple® Benelux 1, rue du commerceBP3767211 Obernai CedexFrankrijkTel: +31 (0)70 363 34 30Fax: +31 (0)70 362 18 44

Gripple® Inc.1611 Emily LaneAurora,IL 60502USATel : +1 866 474 7753Fax : +1 630 406 0664

Gripple® GmbHSophienstrasse 2276530 Baden-BadenDeutschlandTel : +49 (0)700 95 44 95 11Fax : +49 (0)700 95 08 78 11

Gripple® s.r.lVia Guglielmo Marconi, 3224068 Seriate (BG)ItaliaTel: +39 035 300 246Fax: +39 035 424 0036

© 2009 GrippleGripple is a registered trademark of Gripple Limited, Company registered in England No. 1772901, VAT Reg No. GB 600 1951 88

HF-PGUIDE-2009-UK

http://www.gripple.com/

mailto:[email protected]

GRIPPLE _uk Product Guide 2009, hangers system

Documents

Transcript of GRIPPLE _uk Product Guide 2009, hangers system