Grille Tech Submittal Catalog
description
Transcript of Grille Tech Submittal Catalog
-
5101 N.W. 36 Avenue Miami, Florida 33142
Toll-Free: 1-866-6-GRILLE (647-4553) Phone: 305-537-0053 Fax: 305-537-0064
Email: [email protected]
IMPORTANT NOTE
Information in this binder is current as of September 2008.
Product submittal drawings are updated periodically.
Please check our website at www.grilletechinc.com
for the most current drawings.
-
5101 N.W. 36 Avenue Miami, Florida 33142
Toll-Free: 1-866-6-GRILLE (647-4553) Phone: 305-537-0053 Fax: 305-537-0064
Email: [email protected] Website: www.grilletechinc.com
Terms and Conditions of Sale
1. Terms 1%- 10 days, Net 30 days. Add 1 % per month service charge on all delinquent accounts.
2. All Prices in the catalog are List Prices. Refer to the current GTI discount sheet for multipliers.
3. All prices and/ or designs subject to change without notice. 4. Shipments will be made to open accounts with established credit. All other shipments
will be made C.O.D., or payment in advance. Return Policy
1. No returned merchandise will be accepted without prior approval of Grille Tech Inc. 2. All returned items must be in new and resalable condition and all return shipping must be
prepaid. 3. No returns after 60 days. 4. No returns on special or non-stock items. 5. Returned merchandise will be subject to a 25% restocking charge to cover the cost of
handling, inspecting and repacking. All prepaid or allowed freight charges and pricing discounts on original shipment will be deducted from credits issued.
Freight Policy
1. All orders are F.O.B. our factory. Standard shipping is a 13% charge. 2. Freight is paid on minimum of $1500.00 net for Florida (except Panhandle). 3. Freight is paid on minimum of $2500.00 net for Florida Panhandle. 4. Freight is paid on minimum of $5000.00 net for Continental US (which excludes Alaska
and Hawaii). 5. All claims for shortage, damage, etc., must be made within 24 hours from date of
shipment. For LTL shipments and truckloads, discrepancies must be noted on bill-of-lading.
Sales Policy
1. Minimum order of $100.00 net for local delivery. 2. Minimum invoice charge of $75.00. 3. Broken box charge: additional 25%.
-
4. All orders must be delivered to the GTI office by fax or email. All orders are acknowledged by fax or email within 24 hours. Please review price and product for accuracy.
5. Changes to orders may only be made on standard stock products that have not yet shipped. No changes allowed for non-standard/non-stock products or rush orders.
6. Cancellation of orders may only be made on standard stock products that have not yet shipped. No cancellations allowed for non-standard/non-stock products or rush orders.
Standard delivery is 15 working days. Rush Service is available as follows (excluding Saturday and Sunday):
3 Day service 75% upcharge (maximum quantity: 25 pieces) 6 Day service 50% upcharge (maximum quantity: 50 pieces) 10 day service 25% upcharge (maximum quantity: 100 pieces)
Special Sizes We are able to make most sizes if given specifications.
1. Sizes other than listed and non-standard sizes, add 25%. 2. Fractional sizes, add $10 net per unit PLUS the 25% non-standard charge.
Warranty GRILLE TECH INC., warrants that the products it manufactures are produced in accordance with the standards and specifications shown in this catalog. No warranty of suitability for any particular purpose, or any other presentation or warranty, whether expressed or implied, is made respecting these products.
-
SERIES MODEL DESCRIPTION DWG. #
PDB Perforated Face, Molded Back Ceiling Diffuser PD301-A
PDBA Perforated Face (Adjustable), Molded Back Ceiling Diffuser PD301-B
EDB Expanded Metal Face, Molded Back Ceiling Diffuser PD301-C
EDBA Adjustable Expanded Metal Face, Molded Back Ceiling Diffuser PD301-D
PRF Perforated Face with Filter, Molded Back Ceiling Return PD401-A
PSR Removable Perforated Face (Adjustable), Molded Back Ceiling Diffuser PD401-B
EPRIU Flat Panel Molded Back Diffuser SC2A
SCFIU Square Cone Face Molded Back Diffuser SC1B
CLR Cube Core Removable Molded Back Ceiling Return CLR
RATU Return T-Bar with Universal Back RATU
RAFTU Return T-Bar with Filter and Universal Back RAFTU
RA6AU Aluminum Panel Return with Universal Back RA6AU
RAF6AU Aluminum Panel Return with Filter and Universal Back RAF6AU
UHU Aluminum Directional Louvered Face Diffuser with Molded Universal Back UHU
PSF Perforated Face Supply Diffuser PD102-A
PSC Perforated Face Supply Diffuser (Curved Blade Pattern Control) PD101-A
PDL-6 / PDL-N-6 T-Bar Lay-In Supply Diffuser, Round Neck PD103-6A
PDL-R-ND-6 / -N-6 Perforated Face Non-Ducted Return Diffuser, T Bar Lay-In PD103-C
PRD-6 / PRD-N-6 (R) Round Neck Perforated Return Diffuser, T Bar Lay-In PD104-6R
PRD-6 / PRD-N-6 (SQ) Square Neck Perforated Return Diffuser, T Bar Lay-In PD104-6S
PRD-1 / PRD-N-1 (R) Round Neck, Perforated Return Diffuser, Surface Mount PD104-1R
PRD-1 / PRD-N-1 (SQ) Square Neck Perforated Return Diffuser, Surface Mount PD104-1S
PRD Perforated Return Diffuser PD104-A
PRN Perforated Face Return (Face Panel Only) PD104-B
PDB Perforated Face, Molded Back Ceiling Diffuser PD301-A
PDBA Perforated Face (Adjustable), Molded Back Ceiling Diffuser PD301-B
EDB Expanded Metal Face, Molded Back Ceiling Diffuser PD301-C
EDBA Adjustable Expanded Metal Face, Molded Back Ceiling Diffuser PD301-D
PRF Perforated Face with Filter, Molded Back Ceiling Return PD401-A
PSR Removable Perforated Face (Adjustable), Molded Back Ceiling Diffuser PD401-B
SMA Mounting Frame (See drawing in 'Special Products' section) SD201-C
STR Square to Round Adapter (See drawing in 'Special Products' section) STR
UBC Universal Back Collar (See drawing in 'Special Products' section) UBC
SCF Square Face / Round Neck Ceiling Diffuser SD201-A
SCF-3, SCF-4, SCFBZZU Square Face / Round Neck Diffuser Product Description SC1A
SCFI, SCFIU Square Face / Round Neck And Universal Back Diffuser Product Description SC1B
EPR Square Panel Diffuser SD201-D
EPR, EPRI, EPRIU Square Face / Round Neck Diffuser Product Description SC2A
PF Plaster Mounting Frame (See drawing in 'Special Products' section) SD201-H
SMA Mounting Frame (See drawing in 'Special Products' section) SD201-C
STR Square to Round Adapter (See drawing in 'Special Products' section) STR
UBC Universal Back Collar (See drawing in 'Special Products' section) UBC
UH / UHD Aluminum Directional Diffuser (Horizontal Tip Blade) DD101-A
UH WITH APD Aluminum Directional Diffuser with Air Pattern Deflector (Horizontal Tip Blade) DD101-E
UH CORE STYLES Core Styles DD201-A
UHU Aluminum Directional Louvered Face Diffuser with Molded Universal Back UHU
URC-5 Concentric Supply/Return Diffuser DD103-A
MCD Modular Core Ceiling Diffuser DD201-B
SMA Mounting Frame (See drawing in 'Special Products' section) SD201-C
STR Square to Round Adapter (See drawing in 'Special Products' section) STR
UBC Universal Back Collar (See drawing in 'Special Products' section) UBC
LPB / LPBI Plenum Type Slot Diffusers PB101-A
LPBX / LPBXI Plenum Type Slot Diffusers, Extruded Pattern Controller PB201-A
HID-H / HID-HR High Induction Plenum Slot Diffuser, Horizontal Pattern PB301-A
HID-HV / HID-HVR High Induction Plenum Slot Diffuser, Vertical Pattern PB302-A
SMA Mounting Frame (See drawing in 'Special Products' section) SD201-C
SUBMITTAL INFORMATION TABLE OF CONTENTS
PERFORATED FACE DIFFUSER
PLENUM SLOT DIFFUSER
LOUVER FACE DIFFUSER
UNIVERSAL PRODUCTS
(see respective sections for submittals)
SQUARE CONE DIFFUSER
NOTE: Performance Data is included after each Submittal Drawing.
-
SERIES MODEL DESCRIPTION DWG. #
LS / LR (A & B) Linear Slot Diffuser, Frame Types A and B LS101-AB
LS / LR (C) Linear Slot Diffuser, Frame Type C LS101-C
LS / LR (D) Linear Slot Diffuser, Frame Type D Donn Fine Line LS101-D
LSP / LSPI (B) Linear Slot and Insulated Plenums for Lay-In Applications, Type B LS201-B
LSP / LSPI (C) Linear Slot and Insulated Plenums for Surface Mount, Type C LS201-C
LSMC Mitred Corner Sections for LS/LR Linear Diffusers LS301-A
BG / BGH (480/580) Linear Bar Type Grilles and Registers, 480 and 580 Series BG102-A
BG / BGH (540) Linear Bar Type Grilles and Registers 540 Series BG101-A
BGOHRC Removable Core Vent BGOHRC
FRBG French Riviera Bar Grille FRBG
BGMC Mitred Corner Sections for BG Linear Bar Grilles BG201-A
V / H Aluminum Single Deflection, Vertical/Horizontal Blades SG101-A
VM / HM Aluminum Single Deflection with Multi-Shutter Damper SG101-B
VH / HV Aluminum Double Deflection, Vertical/Horizontal Blades SG102-A
EV / EH Aluminum Single Deflection, Extruded Frame, Vertical/Horizontal Blades SG201-A
EVH / EHV Aluminum Double Deflection, Extruded Frame, Vertical/Horizontal Blades SG202-A
CL1 Curved Blade Louvered Face, 1-Way Deflection Grille or Register (Long) SG301-A
CL2 Curved Blade Louvered Face, 2-Way Deflection Grille or Register (Long) SG301-B
CL3 Curved Blade Louvered Face, 3-Way Deflection Grille or Register (Long) SG302-A
CL4 Curved Blade Louvered Face, 4-Way Deflection Grille or Register (Long) SG302-B
CLCL Curved Blade Louvered Face, 2-Way Corner Deflection (Long, Left) SG302-C
CS1 Curved Blade Louvered Face, 1-Way Deflection Grille or Register (Short) SG305-A
CS2 Curved Blade Louvered Face, 2-Way Deflection Grille or Register (Short) SG305-B
CS3 Curved Blade Louvered Face, 3-Way Deflection Grille or Register (Short) SG305-C
CS4 Curved Blade Louvered Face, 4-Way Deflection Grille or Register (Short) SG305-D
CLCR Curved Blade Louvered Face, 2-Way Corner Deflection (Long, Right) SG305-E
CL1M Curved Blade Louvered Face, 1-Way Deflection with Multi-Shutter (Long) SG302-D
CL2M Curved Blade Louvered Face, 2-Way Deflection with Multi-Shutter (Long) SG302-E
CL3M Curved Blade Louvered Face, 3-Way Deflection with Multi-Shutter (Long) SG302-F
CL4M Curved Blade Louvered Face, 4-Way Deflection with Multi-Shutter (Long) SG302-G
CLCLM Curved Blade Louvered Face, 2-Way Corner with Multi-Shutter (Long, Left) SG302-H
CS1M Curved Blade Louvered Face, 1-Way Deflection with Multi-Shutter (Short) SG306-A
CS2M Curved Blade Louvered Face, 2-Way Deflection with Multi-Shutter (Short) SG306-B
CS3M Curved Blade Louvered Face, 3-Way Deflection with Multi-Shutter (Short) SG306-C
CS4M Curved Blade Louvered Face, 4-Way Deflection with Multi-Shutter (Short) SG306-D
CLCRM Curved Blade Louvered Face, 2-Way Corner w/ Multi-Shutter (Long, Right) SG306-E
CL1V Curved Blade Louvered Face, 1-Way Deflection w/Vertical Adj. Airflow Blades SG304-A
CL2V Curved Blade Louvered Face, 2-Way Deflection w/Vertical Adj. Airflow Blades SG304-B
CS1H Curved Blade Louvered Face, 1-Way Deflection w/Horizontal Adj. Blades SG303-A
CS2H Curved Blade Louvered Face, 2-Way Deflection w/Horizontal Adj. Blades SG303-B
CL, CS CORE STYLES Core Styles, Curved Blade Multi-Deflection (1, 2, 3 or 4-Way Deflection) SG302-J
PF Plaster Frame (See drawing in 'Special Products' section) SD201-H
RA / RAOB Aluminum Return RG101-A
RA0/RA0-OB 0-Degree Deflection Aluminum Return RA001
RATU Return T-Bar with Universal Back RATU
RA6A Aluminum Panel Return RA6A
RA6AU Aluminum Panel Return with Universal Back RA6AU
RAHD Heavy Duty Aluminum Louvered Face Return RG301-A
RAC5 Aluminum Return Cube Core RG201-A
RAC56A Aluminum Panel Return RAC56A
RAC56AU Aluminum Panel Return with Universal Back RAC56AU
RAC5F Aluminum Return Filter Grille, Cube Core RF201-A
CLR Cube Core Removable Molded Back Ceiling Return CLR
ALUMINUM RETURN GRILLE & REGISTER
ALUMINUM SUPPLY GRILLE & REGISTER
LINEAR BAR GRILLE
LINEAR SLOT DIFFUSER
SUBMITTAL INFORMATION TABLE OF CONTENTS
NOTE: Performance Data is included after each Submittal Drawing.
-
SERIES MODEL DESCRIPTION DWG. #
RAF Aluminum Return Filter Grille RF101-A
RAF6A Aluminum Panel Return with Filter RAF6A
RAF6AU Aluminum Panel Return with Filter and Universal Back RAF6AU
RAFTU Return T-Bar with Filter and Universal Back RAFTU
RAP Aluminum Perforated Return RP101-A
RAPF Aluminum Perforated Return Filter RP201-A
PF Plaster Mounting Frame (See drawing in 'Special Products' section) SD201-H
SMA Mounting Frame (See drawing in 'Special Products' section) SD201-C
STR Square to Round Adapter (See drawing in 'Special Products' section) STR
UBC Universal Back Collar (See drawing in 'Special Products' section) UBC
DOOR GRILLE DGS / DGF Aluminum Non-Vision Door Grille DG101-A
OBD Opposed Blade Damper AC101-A
PBD Parallel Blade Damper AC101-B
HSBD Control Damper Heavy Single Blade AC101-C
SBD Control Damper Single Blade AC101-F
S-OBD Multi-Shutter Blade Damper, Screwdriver Operated AC101-E
S-OBDH Multi-Shutter Blade Damper, Handle Operated AC101-D
RBD Round Single Blade Balancing Damper AC102-A
BCD Butterfly Control Damper SD201-E
OBR Opposed Blade Damper SD201-J
WLF Extruded Outside Wall Louver, Flanged WL101- B
WLC Extruded Outside Wall Louver WL101-A
WLF-DA Miami-Dade Approved Hurricane Louver WL102-A
WLF-DA INSTALL Installation Instructions for WLF-DA WL103-A, B,C
BVF2I 2" Flanged Brick Wall Vent with Insect Screen BVF01
BVF4I 4" Flanged Brick Wall Vent with Insect Screen BVF02
BVC4I 4" Channel Brick Wall Vent with Insect Screen BVF03
BZZU SUBMITTAL Fire Rated Lay In face Perforated Ceiling Diffusers, Steel BZZU.R12178
BZZU INSTALL A Ceiling Diffuser to Flexible Duct Installation Instructions PF6
BZZU INSTALL B Ceiling Diffuser to Rigid Duct Installation Instructions PF7
BZZU INSTALL C Ducted Return Air Ceiling Diffuser Installation Instructions PF8
STR Square to Round Adapter (See drawing in 'Special Products' section) STR
WAPI Wall Access Panel With Insulation WAPI
HX24,25,30,31,36,37 First Company HX-Series Access Panel / Return Air With Filter HX24,25,30,31,36,37
DAIKIN APBSVQ3660 Daikin Access Panel Door BSVQ36/60AP
FXSQ12-48APRF Daikin Access Panel / Return Air With Filter FXSQ12-48APRF
FXSQ12-48AP Daikin Access Panel With Double Door FXSQ12-48AP
FXMQ30,36,48APRF Daikin Access Panel / Return Air With Filter FXMQ30,36,48APRF
FXMQ30,36,48AP Daikin Access Panel Door FXMQ30,36,48AP
FXDQ07,09,12,1824APRF Daikin Access Panel / Return Air With Filter FXDQ07,09,12,1824APRF
FXDQ07,09,12,1824AP Daikin Access Panel Door FXDQ07,09,12,1824AP
SQ12-48APRF Daikin SQ-Series Access Panel / Return Air With Filter SQ12-48APRF
SQ12-48AP Daikin SQ-Series Access Panel With Double Door SQ12-48AP
PF Plaster Mounting Frame SD201-H
SMA Mounting Frame SD201-C
STR Square to Round Adapter STRUBC Universal Back Collar UBC
NOTE: Performance Data is included after each Submittal Drawing.
SPECIAL PRODUCTS
SUBMITTAL INFORMATION TABLE OF CONTENTS
CONTROL DAMPER
WALL LOUVERS
FIRE PRODUCTS
ALUMINUM RETURN GRILLE & REGISTER
-
LS-50, " Slot Supply
CFM/FT 10 15 20 25 30 40 50 60 70 80Pt .014 .034 .056 .081 .122 .206 .310 .423 .557 .625NC
-
PSF 24 x 24 Square NeckFPM Neck 300 400 500 600 700 800 1000 1200 1400
Pv In WG .006 .010 .016 .023 .031 .040 .063 .090 .123
Pt .013 .023 .037 .053 .072 .094 .147 .211 .287CFM 75 100 125 150 175 200 250 300 350NC < < < 23 26 29 37 43 48
4-Way 1-1-1 1-1-2 1-1-3 1-1-4 1-1-5 1-2-6 1-3-8 2-4-9 3-5-113-Way 1-1-3 1-1-5 1-2-6 1-3-8 1-4-9 2-5-10 3-6-13 5-8-16 6-9-172-Way 1-1-4 1-2-7 1-3-9 2-4-10 2-6-12 3-7-14 5-9-18 7-10-19 8-12-211-Way 1-1-6 1-2-8 2-4-11 2-6-13 3-7-15 5-8-17 7-11-20 8-13-22 10-15-24
Pt .018 .031 .049 .071 .096 .126 .196 .283 .385CFM 133 177 222 266 310 355 444 532 621NC < < 23 27 31 35 43 49 54
4-Way 1-1-2 1-1-4 1-1-6 1-2-7 1-3-8 2-4-9 3-6-12 4-7-14 5-8-173-Way 1-1-5 1-2-8 1-4-10 2-5-12 3-7-14 4-8-16 6-10-20 8-12-24 9-14-262-Way 1-2-8 1-4-10 2-6-13 4-8-16 5-9-19 7-10-21 9-13-26 10-16-29 12-19-311-Way 1-3-9 2-5-13 3-8-16 5-9-19 7-11-23 8-13-26 11-16-30 13-19-33 15-23-35
Pt .022 .039 .061 .088 .119 .156 .243 .350 .477CFM 208 277 347 416 485 555 694 832 971NC < 22 27 31 35 40 47 53 58
4-Way 1-1-4 1-2-6 1-3-8 2-4-10 2-5-11 3-6-13 5-8-16 6-10-20 7-11-233-Way 1-2-8 1-4-11 3-6-13 4-8-16 5-9-19 7-11-22 9-13-27 11-16-32 12-19-352-Way 1-3-11 3-6-14 4-9-18 6-11-22 8-13-26 9-14-29 12-18-36 14-22-39 17-26-431-Way 2-5-13 4-9-18 6-11-22 9-13-27 10-16-32 12-18-36 15-22-41 18-27-45 21-32-49
Pt .026 .047 .073 .105 .144 .188 .293 .422 .574CFM 300 400 500 600 700 800 1000 1200 1400NC < 25 30 34 39 43 51 57 62
4-Way 1-1-6 1-3-8 2-4-11 3-6-13 4-7-15 5-8-17 7-11-22 8-13-26 10-15-303-Way 1-3-10 2-6-14 4-9-18 6-10-21 8-12-25 9-14-28 11-18-36 14-21-42 16-25-452-Way 2-5-14 4-9-19 7-12-24 9-14-29 11-17-34 13-19-39 16-24-46 19-29-51 22-34-551-Way 3-8-17 6-11-23 9-14-29 11-17-35 13-20-41 15-23-47 19-29-53 23-35-58 27-41-63
Notes:1. All pressures are in inches of water.2. Throw values are for velocities of 150, 100, and 50 FPM.3. NC values are based on a room absorption of 10db.4. < = NC less than 20db.
Throw, Feet
10" x 10"
Throw, Feet
Throw, Feet
12"x 12"
Throw, Feet
Neck Size
6" x 6"
8" x 8"
-
PSF 24 x 24 Round NeckRemovable Face, 4 Adjustable Pattern Controllers
FPM Neck 300 400 500 600 700 800 1000 1200 1400
Pv In WG .006 .010 .016 .023 .031 .040 .063 .090 .123Pt .012 .021 .033 .047 .064 .084 .131 .189 .257
CFM 58 78 98 117 137 156 196 235 274NC < < < 21 24 27 34 40 46
4-Way 1-1-1 1-1-1 1-1-3 1-1-4 1-1-4 1-1-5 1-3-6 1-4-8 2-4-93-Way 1-1-2 1-1-4 1-1-5 1-2-6 1-3-7 1-4-8 2-5-11 4-6-13 5-7-142-Way 1-1-3 1-1-6 1-2-7 1-3-9 2-4-10 2-6-12 4-7-15 6-9-16 7-10-181-Way 1-1-4 1-2-7 1-3-9 2-4-11 2-6-13 3-7-14 6-9-17 7-11-19 8-13-20
Pt .015 .027 .043 .062 .084 .110 .171 .247 .336CFM 104 139 174 209 244 279 349 418 488NC < < 21 25 29 33 40 46 51
4-Way 1-1-2 1-1-3 1-1-5 1-2-6 1-2-7 1-3-8 2-5-10 3-6-12 4-7-143-Way 1-1-4 1-2-6 1-3-8 2-4-10 2-5-11 3-6-13 5-8-17 6-10-20 7-11-222-Way 1-1-6 1-3-9 2-4-11 3-6-13 4-8-16 5-9-18 7-11-22 9-13-24 10-16-261-Way 1-2-8 1-4-11 2-6-14 4-8-16 5-9-19 7-11-22 9-14-25 1-16-28 13-19-30
Pt .019 .034 .054 .077 .105 .138 .215 .310 .422CFM 163 218 272 327 381 436 545 654 763NC < 20 25 29 33 37 45 51 56
4-Way 1-1-3 1-1-5 1-2-7 1-3-8 2-4-10 2-5-11 4-7-14 5-8-17 6-10-203-Way 1-1-7 1-3-9 2-5-11 3-7-14 4-8-16 5-9-18 7-11-23 9-14-27 11-16-292-Way 1-2-9 2-5-12 3-7-15 5-9-19 7-11-22 8-12-25 10-15-31 12-19-33 14-22-361-Way 1-3-11 3-7-15 4-9-19 7-11-23 9-13-27 10-15-30 12-19-35 15-23-38 18-27-41
Pt .023 .041 .065 .093 .127 .166 .259 .373 .507CFM 235 314 392 471 549 628 785 942 1099NC < 23 28 32 36 41 48 54 59
4-Way 1-1-5 1-2-7 1-3-9 2-5-11 3-6-13 4-7-14 6-9-18 7-11-22 8-13-263-Way 1-2-9 2-5-12 3-7-15 5-9-18 6-10-21 8-2-24 10-15-30 12-18-35 14-21-382-Way 1-4-12 3-7-16 5-10-20 7-12-24 9-14-28 10-16-32 13-20-40 16-24-43 19-28-471-Way 2-6-14 4-9-19 7-12-24 9-14-29 11-17-34 13-19-39 16-24-45 19-29-49 23-34-53
Pt .027 .048 .075 .108 .147 .192 .299 .431 .587CFM 318 424 530 636 742 848 1060 1272 1484NC < 25 30 34 39 44 51 57 62
4-Way 1-1-6 1-3-9 2-5-11 3-6-13 4-8-16 5-9-18 7-11-23 9-13-27 10-16-233-Way 1-4-11 3-7-14 4-9-18 7-11-22 8-13-26 9-14-29 12-18-37 14-22-43 17-26-472-Way 2-6-15 4-10-20 7-12-25 10-15-30 11-17-35 13-20-40 16-25-49 20-30-53 23-35-581-Way 3-8-18 6-12-24 10-15-30 12-18-37 14-21-43 16-24-49 20-30-56 24-37-61 28-43-66
Pt .033 .059 .092 .132 .180 .235 .368 .53 .721CFM 418 558 698 837 977 1116 1396 1675 1954NC < 25 31 35 40 45 53 59 66
4-Way 1-3-10 2-5-13 3-8-15 5-10-16 7-12-77 9-13-19 12-15-21 13-16-23 14-17-253-Way 3-5-9 5-7-10 6-8-11 7-9-12 8-9-13 8-10-14 9-11-16 10-12-18 11-13-192-Way 2-5-11 4-8-13 6-10-14 8-11-16 9-12-17 10-13-18 12-14-20 13-16-22 14-17-241-Way 7-12-21 11-17-24 14-19-27 17-21-30 18-23-32 20-24-35 22-27-39 24-30-42 26-32-46
NOTES:1. All pressures are in inches of water.2. Throw values are for velocities of 150, 100, and 50 FPM.3. NC values are based on room absorption of 10db, re: 10 - 12 watts.4. < = NC less than 20db.
Throw, Feet
14" Diameter
Throw, Feet
Throw, Feet
15" Diameter
Throw, Feet
10" Diameter
Throw, Feet
12" Diameter
Neck Size
6" Diameter
Throw, Feet
8" Diameter
-
PSC 24 x 24 Square NeckFlush Face
FPM Neck 300 400 500 600 700 800 1000Pv In WG .006 .010 .016 .023 .031 .040 .063
Pt .025 .044 .069 .100 .136 .177 .277CFM 75 100 125 150 175 200 250NC < 22 27 33 36 39 46
4-Way 2-3-4 2-3-5 2-4-5 3-4-6 3-5-7 4-6-8 5-7-93-Way 2-3-4 3-3-5 3-4-6 4-6-8 5-7-9 5-8-11 6-9-122-Way 3-4-5 3-4-6 4-6-8 5-8-11 6-9-12 7-11-14 7-11-151-Way 4-5-7 4-6-8 5-7-10 6-10-3 7-11-15 8-13-17 1015-20
Pt .030 .054 .087 .126 .173 .220 .356CFM 130 175 220 265 310 350 445NC 21 26 31 36 39 43 47
4-Way 3-4-6 3-4-6 3-5-7 4-6-8 5-7-10 6-8-12 6-10-13 3-Way 3-5-6 3-5-7 4-6-8 5-7-10 6-10-13 7-11-15 8-13-172-Way 3-6-7 5-7-10 6-9-12 7-11-14 8-13-17 10-15-20 11-17-241-Way 4-6-8 5-8-11 7-11-14 8-13-17 10-15-20 11-17-22 13-19-28
Pt .034 .058 .092 .133 .181 .237 .372CFM 210 275 345 415 485 555 695NC 25 30 35 40 43 45 51
4-Way 3-4-5 4-5-8 5-7-10 5-8-11 6-10-13 7-11-15 8-13-173-Way 4-5-7 4-6-9 6-9-12 7-11-14 8-13-17 9-14-19 10-15-212-Way 5-7-10 6-9-12 7-11-15 9-14-19 11-16-22 12-18-25 15-19-221-Way 5-8-11 7-11-15 9-14-17 11-17-23 13-20-27 15-23-30 17-26-35
Pt .038 .067 .105 .152 .206 .269 .421CFM 300 400 500 600 700 800 1000NC 27 33 38 42 47 51 57
4-Way 3-5-7 4-6-9 5-8-11 7-11-14 8-12-16 9-14-20 12-16-223-Way 4-6-8 4-8-11 7-11-14 8-13-17 10-15-21 12-18-24 13-19-262-Way 5-8-11 7-11-15 10-15-21 11-17-23 14-21-28 16-24-32 17-26-351-Way 7-11-15 9-14-19 11-17-23 14-21-20 16-24-32 17-26-35 20-30-40
Pt .042 .074 .115 .166 .225 .297 .462CFM 410 545 680 815 950 1090 1360NC 30 36 40 44 48 52 58
4-Way 3-5-8 5-8-11 6-10-13 8-13-17 9-14-19 11-17-23 13-20-273-Way 4-7-10 5-9-12 7-12-15 9-14-19 10-16-22 12-18-26 15-22-302-Way 5-8-12 7-11-17 10-16-21 11-18-25 15-22-30 17-25-35 18-28-381-Way 7-11-17 9-14-21 12-18-25 14-22-29 16-24-34 18-27-38 20-30-42
Pt .046 .082 .128 .184 .252 .328 .543CFM 530 710 885 1060 1240 1415 1770NC 31 36 40 45 49 53 59
4-Way 4-6-9 6-9-12 7-11-15 9-14-19 11-16-22 12-18-25 14-23-303-Way 5-8-11 7-11-14 8-13-17 10-15-21 12-18-25 14-22-29 17-25-342-Way 8-13-14 11-16-19 12-18-25 15-21-30 17-26-35 19-29-39 22-32-421-Way 8-13-17 10-17-21 13-20-27 15-23-31 18-27-37 20-30-41 23-33-44
Notes:1. All pressures are in inches of water.2. Throw values are for velocities of 150, 100, and 50 FPM.3. NC values are based on a room absorption of 10db.4. < = NC less than 20db.
Throw, Feet
Throw, Feet
14" x 14"
Throw, Feet
16" x 16"
Throw, Feet
10" x 10"
Throw, Feet
12" x 12"
Neck Size
6" x 6"
Throw, Feet
8" x 8"
-
PSC 24 x 24 Round NeckCurved Blade Core, Removable Flush Face
FPM Neck 300 400 500 600 700 800 1000Pv In WG .006 .010 .016 .023 .031 .040 .063
Pt .027 .047 .074 .099 .135 .180 .285CFM 60 80 100 115 135 155 195NC < < 23 28 33 37 44
4-Way 2-3-4 2-3-4 2-3-5 2-4-6 3-5-7 4-6-8 5-8-113-Way 3-5-7 3-6-8 3-6-8 3-6-9 4-6-9 4-7-9 6-9-122-Way 4-6-8 4-7-9 4-8-9 5-8-10 6-9-12 7-10-13 8-12-161-Way 5-8-10 5-9-10 5-9-12 6-9-12 7-10-13 8-12-16 9-14-18
Pt .021 .038 .059 .085 .116 .152 .238CFM 105 140 175 210 245 280 350NC < 22 27 32 37 41 45
4-Way 3-5-7 3-5-7 4-6-8 5-8-11 6-9-12 7-10-13 9-14-183-Way 4-6-8 4-7-9 5-8-11 6-9-12 7-10-13 8-12-16 10-15-202-Way 5-8-11 5-8-11 6-9-12 7-10-13 8-12-16 9-14-18 11-16-211-Way 5-9-12 6-9-12 7-10-13 8-12-16 9-14-18 10-15-20 12-18-24
Pt .026 .046 .069 .100 .137 .181 .283CFM 165 220 270 325 380 435 545NC < 22 27 32 37 41 47
4-Way 3-5-7 4-6-8 5-8-11 6-9-12 8-12-16 9-14-18 11-16-213-Way 4-6-8 5-8-10 6-9-12 8-12-16 9-14-18 10-15-20 12-18-242-Way 5-8-11 6-9-12 8-12-16 10-15-20 12-18-24 14-21-28 15-23-311-Way 6-9-12 8-12-16 10-15-20 12-18-24 14-21-28 16-24-32 19-28-38
Pt .025 .045 .069 .100 .137 .179 .279CFM 235 315 390 470 550 630 785NC 22 27 33 38 42 46 52
4-Way 3-5-7 5-8-11 6-9-12 8-12-16 9-14-18 10-15-20 12-18-243-Way 4-5-8 6-9-12 8-12-16 10-15-20 10-15-20 12-18-24 14-21-282-Way 6-9-12 8-12-16 10-15-20 12-18-24 14-21-28 16-24-32 18-27-361-Way 8-12-16 10-15-20 12-18-24 14-21-28 16-24-32 18-27-36 22-33-44
Pt .030 .053 .084 .120 .165 .198 .335CFM 320 425 535 640 750 955 1070NC 27 32 37 42 46 50 57
4-Way 5-8-11 6-9-12 8-12-16 9-14-18 10-15-20 12-18-24 14-21-283-Way 6-9-12 7-10-13 10-15-20 10-15-20 12-18-24 14-21-28 16-24-322-Way 7-10-13 9-14-18 12-18-24 14-21-28 16-24-32 18-27-36 20-30-401-Way 8-12-16 11-16-21 14-21-28 16-24-32 18-27-36 22-33-44 25-37-49
Pt .029 .051 .080 .115 .156 .204 .320CFM 420 560 700 835 975 1115 1395NC 23 29 35 41 45 50 56
4-Way 7-10-13 8-12-16 9-14-18 10-15-20 11-16-21 14-21-28 16-24-323-Way 8-12-16 9-14-18 11-16-21 13-20-26 14-21-28 15-23-31 20-30-402-Way 9-14-18 10-15-20 13-20-26 15-23-31 17-25-33 19-28-38 24-36-481-Way 10-15-20 12-18-24 15-23-31 17-25-33 19-28-38 23-34-45 26-39-52
Notes:1. All pressures are in inches of water.2. Throw values are for velocities of 150, 100, and 50 FPM.3. NC values are based on a room absorption of 10db.4. < = NC less than 20db.
Throw, Feet
Throw, Feet
14" Diameter
Throw, Feet
16" Diameter
Throw, Feet
10" Diameter
Throw, Feet
12" Diameter
Neck Size
6" Diameter
Throw, Feet
8" Diameter
-
PDL 24 x 24 Round Neck4-Way (360) Air Pattern
Neck Velocity (FPM) 100 200 300 400 500 600
CFM 20 39 59 78 98 118Ps .001 .003 .008 .014 .022 .031NC
-
PRD Perforated Return (Ducted)Removable Face
ROUND Neck Velocity (FPM) 300 400 500 600 700 800 900 1400Neck size Velocity Pressure, in. W.G. -.01 -.02 -.03 -.04 -.05 -.06 -.08 -.10
6 CFM 60 80 100 115 135 155 175 1958 CFM 105 140 175 210 245 280 315 35010 CFM 165 220 270 325 380 435 490 54512 CFM 235 315 390 470 550 630 705 78514 CFM 320 425 535 640 750 855 960 107016 CFM 420 560 700 835 975 1115 1255 139518 CFM 520 700 870 1045 1220 1255 1570 1740
SQUARE Neck Velocity (FPM) 300 400 500 600 700 800 900 1000Neck size Velocity Pressure, in. W.G. -.008 -.015 -.02 -.03 -.05 -.06 -.08 -.09
6 CFM 75 100 120 150 175 200 225 2508 CFM 130 175 220 265 310 350 400 44510 CFM 210 275 345 415 485 555 625 69512 CFM 300 400 500 600 700 800 900 100014 CFM 410 545 680 815 950 1090 1225 136016 CFM 530 710 885 1060 1240 1415 1600 177022 CFM 1010 1345 1680 2015 2350 2690 3025 3360
ROUND NECK
SQUARE NECK
-
PRN Perforated Return (Non-ducted)Neck Velocity (FPM) 100 200 400 600 800 1000 1200
Ps (In w.g.) .002 .007 .028 .062 .110 .172 .24812" x 12" CFM 100 200 400 600 800 1000 1200AK = .493 NC
-
PDB-EDB 24 x 24 Fixed FaceFiberglass Back Perforated (Supply) Diffusers
FPM Neck Velocity 200 300 400 500 600 700 800 900 1000
Pv .002 .006 .010 .016 .022 .030 .040 .050 .062CFM 25 40 55 70 80 95 110 120 138
Pt .003 .008 .016 .025 .033 .045 .060 .076 .094Throw 1-1-1 1-1-1 1-1-1 1-1-3 1-1-4 1-1-4 1-1-5 1-2-6 1-3-6
NC < < < < < < 21 24 27CFM 40 60 80 100 115 135 155 175 196
Pt .004 .009 .016 .027 .035 .049 .066 .078 .105Throw 1-1-1 1-1-1 1-1-4 1-2-4 1-2-5 1-3-6 2-3-7 2-3-8 2-4-10
NC < < < < 22 26 30 35 38CFM 50 80 105 135 160 185 210 240 265
Pt .005 .013 .026 .036 .050 .068 .088 .115 .140Throw 1-1-1 1-1-3 1-1-4 1-2-4 1-2-5 1-3-6 2-3-7 2-3-8 2-4-10
NC < < < 20 23 26 30 34 37CFM 70 105 140 175 210 245 280 315 350
Pt .006 .013 .026 .037 .054 .073 .096 .121 .150Throw 1-1-2 1-1-3 1-2-5 2-2-5 2-3-6 2-3-8 2-4-10 3-5-11 3-6-12
NC < < < 20 23 26 30 34 38CFM 110 160 215 270 325 380 435 490 545
Pt .008 .018 .033 .052 .075 .111 .135 .171 .212Throw 1-2-3 1-2-4 1-2-5 2-3-6 2-3-7 3-4-8 3-4-10 3-5-12 4-7-14
NC < < 20 23 26 29 34 38 41CFM 155 235 315 390 470 550 630 705 785
Pt .009 .021 .039 .059 .086 .118 .155 .194 .240Throw 1-2-4 1-2-5 1-2-7 2-3-9 2-5-11 3-6-13 4-7-14 6-9-18 7-11-21
NC < 20 24 27 30 34 38 42 45CFM 210 320 425 535 640 750 855 960 1070
Pt .010 .022 .039 .063 .091 .124 .162 .210 0.253Throw 1-2-6 1-3-9 2-5-11 3-6-13 4-8-16 5-9-18 7-11-23 9-13-27 10-16-32
NC < 20 24 28 32 36 40 45 48CFM 245 370 490 610 735 860 980 1105 1225
Pt .015 .034 .060 .093 .135 .185 .240 .305 .375Throw 1-3-9 2-5-11 3-6-13 4-8-16 5-10-18 7-11-23 9-13-27 10-16-32 11-16-33
NC < 23 28 33 38 43 48 53 55Notes: 1. Noise based on 10db room absorption.2. Throws are for 150, 100, 50 FPM.3. < = NC less than 20db
15
8
10
12
14
NECK DIAMETER
5
6
7
-
PDBR-EDBR Perforated Return DiffusersFiberglass Back, No Pattern Controllers
FPM INLET 200 300 400 500 600 700 800 900 1000Ps -.005 -.013 -.024 -.040 -.050 -.070 -.096 -.115 -.146
5 CFM 25 40 55 70 80 95 110 120 1356 CFM 40 60 80 100 115 135 155 175 1957 CFM 50 80 105 135 160 185 210 240 2658 CFM 70 105 140 175 210 245 280 315 3509 CFM 90 130 175 220 265 310 350 395 44010 CFM 110 160 215 270 325 380 435 490 54512 CFM 155 235 315 390 470 550 630 705 78514 CFM 210 320 425 535 640 750 855 960 107015 CFM 245 370 490 610 735 860 980 1105 1225
NECK DIAMETER
-
PDBA-EDBA 24 x 24 Adjustable FaceFiberglass Back Perforated (Supply) Diffusers
FPM Neck 300 400 500 600 700 800 1000Pv .006 .010 .016 .023 .031 .040 .062
CFM 40 55 70 80 95 110 135Pt .010 .019 .031 .040 .056 .076 .114NC < < < < < 20 24
4 way 1-1-3 1-1-4 1-2-4 1-2-5 1-3-5 2-3-6 2-3-73 way 1-1-3 1-2-4 1-2-5 1-3-6 2-3-6 2-3-8 3-3-82 way 1-2-4 1-2-5 1-3-5 1-3-6 3-4-6 3-4-9 3-4-91 way 1-2-5 1-3-5 2-4-6 3-4-7 3-4-7 3-4-9 3-4-9CFM 60 80 100 115 135 155 195
Pt .012 .022 .034 .045 .062 .083 .131NC < < < < 20 24 31
4 way 1-1-3 1-1-4 1-2-4 1-2-5 1-3-6 2-3-7 2-3-83 way 1-1-3 1-2-4 2-2-5 2-3-6 2-3-6 2-3-6 3-4-82 way 1-2-4 1-2-5 2-3-5 2-4-6 3-4-7 3-4-9 3-4-91 way 1-2-5 1-3-5 3-4-6 3-4-7 3-4-8 3-5-9 3-5-10CFM 80 105 135 160 185 210 265
Pt .014 .024 .040 .056 .075 .126 .154NC < < < 20 25 29 35
4 way 1-1-3 1-1-4 1-2-4 1-2-5 1-2-6 1-4-8 3-4-93 way 1-1-3 1-1-4 1-2-4 1-2-5 2-2-6 2-4-9 3-4-102 way 1-1-4 1-2-4 1-3-5 2-3-6 2-3-7 3-4-10 4-5-111 way 1-2-4 1-3-4 2-3-6 2-4-7 2-4-8 3-5-11 4-5-12CFM 105 140 175 210 245 280 350
Pt .017 .031 .048 .070 .095 .124 .195NC < < < 21 26 30 36
4 way 1-1-3 1-2-5 2-2-5 2-3-6 2-3-8 2-4-10 3-5-113 way 1-2-3 1-2-5 2-3-5 2-3-6 3-3-8 3-4-11 3-5-122 way 1-2-4 1-3-5 2-4-6 3-4-7 3-4-9 3-5-12 4-6-131 way 2-3-5 2-4-5 3-4-7 3-5-8 3-5-10 3-6-13 4-6-14CFM 165 220 270 325 380 435 545
Pt .020 .035 .053 .077 .106 .138 .218NC < < 22 28 33 37 43
4 way 1-2-4 1-2-5 2-3-6 2-3-7 3-4-8 3-4-10 3-5-123 way 1-2-4 1-3-6 2-3-7 2-4-8 3-5-9 3-5-12 3-6-132 way 1-2-5 2-3-6 3-4-8 3-4-8 3-6-10 3-6-14 4-7-151 way 2-3-6 2-4-7 3-5-9 3-5-10 4-7-11 4-7-14 5-9-16CFM 235 315 390 470 550 630 785
Pt .032 .059 .090 .131 .180 .236 .367NC < < 25 29 35 40 46
4 way 1-2-4 2-2-8 3-3-8 3-5-10 3-5-11 4-6-12 5-7-143 way 2-5-7 2-3-8 3-4-9 3-5-11 4-6-13 4-7-14 5-8-152 way 2-3-6 3-4-8 3-5-11 3-6-12 4-7-13 5-8-15 6-9-161 way 3-4-8 3-5-9 4-6-12 4-7-13 5-8-14 6-9-16 7-10-18CFM 320 425 535 640 750 855 1070
Pt .039 .068 .108 .156 .213 .277 .435NC < 23 29 34 39 44 50
4 way 2-3-6 3-4-8 3-5-11 4-6-13 4-7-14 5-8-15 6-9-173 way 2-4-7 3-5-9 3-6-12 4-7-14 5-8-16 5-9-17 6-10-182 way 2-5-8 3-5-10 3-7-13 5-8-15 6-10-17 7-10-18 8-11-191 way 3-5-9 4-8-11 4-8-14 6-9-16 7-11-18 8-12-19 9-12-20CFM 370 490 610 735 860 980 1225
Pt .045 .079 .122 .177 .243 .316 .493NC < 25 30 36 41 45 51
4 way 2-3-6 3-4-8 3-5-11 4-7-13 5-8-15 6-8-16 6-9-183 way 3-4-7 3-6-9 3-6-12 4-8-15 5-9-16 6-9-17 6-10-192 way 3-4-8 4-6-10 4-7-13 4-9-16 6-10-17 7-10-18 8-11-201 way 3-5-9 4-8-11 4-7-14 6-9-17 7-11-19 7-12-19 9-13-21
Notes:1. < = NC less than 20db.
Throw
Throw
14
Throw
15
Throw
10
Throw
12
Throw
7
Throw
8
NECK SIZE
5
Throw
6
-
alexNoteSD-201-A REPLACED WITH SCF.PDF IN ANDY'S PUBLIC Pages115-116
-
SCF Square Ceiling Diffuser
NECK VELOCITY FPM 400 500 600 700 800 1000 1200 1400 1600
CFM 80 100 120 140 160 200 240 275 3206" Diameter Pt .040 .054 .081 .108 .125 .220 .306 .420 .550
AK. = .76 Throw 1-5 2-6 3-7 4-7 4-8 5-8 5-9 6-9 7-10NC 20 20 20 21 22 24 25 26 28
CFM 140 175 210 245 280 350 420 490 5608" Diameter Pt .021 .033 .047 .063 .082 .128 .183 .245 .325AK. = .135 Throw 1-5 1-6 2-8 2-8 3-10 4-3 5-13 .6-17 6-17
NC 20 20 20 20 25 29 33 37 42CFM 220 270 330 380 435 545 655 765 870
10" Diameter Pt .026 .039 .057 .074 .097 .150 .215 .293 .372AK. = .213 Throw 1-6 2-9 3-10 4-13 5-13 6-15 6-15 9-18 9-18
NC 20 20 20 20 25 33 37 40 44CFM 320 390 470 550 630 785 990 1100 1255
12" Diameter Pt .024 .037 .047 .075 .097 .150 .245 .310 .410AK. = .306 Throw 2-7 3-8 3-9 4-12 5-12 5-14 7-18 9-18 9-18
NC 20 20 23 26 29 36 42 43 47CFM 425 540 635 745 850 1060 1270 1490 1605
14" Diameter Pt .033 .054 .072 .100 .127 .204 .280 .395 .500AK. = 417 Throw 3-9 4-11 4-13 5-16 6-16 7-19 9-19 11-19 11-27
NC 20 20 23 26 29 35 39 43 47CFM 490 615 735 860 980 1225 1475 1720 1965
15" Diameter Pt .O35 .057 .075 .108 .135 .218 .312 .431 .579AK. = 447 Throw .4-11 5-13 5-15 6-18 7-18 8-22 10-22 13-26 13-32
NC 20 20 24 27 30 36 40 44 48NOTE:1. Noise based on 10db room absorption.
-
alexNoteSD201-D REPLACED WITH "EPR.PDF" IN ANDY'S PUBLIC PAGES 120-121
-
EPR 24 x 24 Square Ceiling DiffuserSquare Face Plate
Neck vel. 400 500 600 700 800 900 1000 1200 1400Velocity 0.010 0.016 0.022 0.031 0.040 0.050 0.062 0.090 0.122
CFM 80 100 120 140 160 180 200 235 275Pt 0.011 0.017 0.025 0.033 0.043 0.054 0.066 0.095 0.132
Throw 1-1-4 1-2-4 1-3-5 2-3-6 2-4-7 3-4-8 3-4-9 4-5-11 4-6-12NC
-
UH-Series 1-Way Core
1 1L 1S
FPM 200 300 400 500 600 700Ps .018 .040 .071 .111 .160 .218
Neck Size Pt .020 .046 .081 .127 .182 .2486 x 6" CFM 50 75 100 125 150 175
Ak .087 Throw 5-10 9-15 13-20 19-27 23-32 27-38NC
-
UH-Series 2-Way Core
2SO 2LO
FPM 200 300 400 500 600 700Ps .018 .040 .071 .111 .160 .218
Neck Size Pt .020 .046 .081 .127 .182 .2489 x 6" CFM 75 113 150 188 225 263
Ak .131 Throw 4-8 8-13 12-19 17-24 21-30 25-36NC
-
UH-Series 2-Way Corner Core
2C
FPM 200 300 400 500 600 700Ps .018 .040 .071 .111 .160 .218
Neck Size Pt .020 .046 .081 .127 .182 .2486 x 6" CFM 50 75 100 125 150 175
Ak .087 Throw 4-7 8-12 11-17 17-23 20-29 25-35NC
-
UH-Series 2-Way Rectangular CornerB B
A A2LC 2RC
FPM 200 300 400 500 600 700Ps .018 .040 .071 .111 .160 .218
Neck Size Pt .020 .046 .081 .127 .182 .2489 x 6" CFM 75 113 150 188 225 263
Ak .131 Throw A 3-6 8-13 12-17 17-24 20-28 24-35Throw B 5-9 9-16 14-21 19-27 23-32 27-38
NC
-
UH-Series 3-Way Core DeflectionA
B 3 B
FPM 200 300 400 500 600 700Ps .013 .030 .053 .083 .120 .163
Neck Size Pt .016 .036 .063 .099 .142 .1946 x 6" CFM 50 75 100 125 150 175
Ak .105 Throw B 3-5 6-11 10-16 15-23 21-28 24-34Throw A 2-4 6-10 10-16 15-21 19-27 23-32
NC
-
UH-Series 3-Way Rectangular Core, 3LA
B
3L AFPM 200 300 400 500 600 700Ps .006 .010 .020 .040 .050 .080
Neck Size Pt .012 .027 .048 .074 .107 .1489 x 6" CFM 75 110 150 185 220 360
Ak .202 Throw A 2-5 5-9 8-14 9-15 12-18 14-20Throw B 1-3 3-7 6-12 8-14 9-15 11-17
NC
-
UH-Series 3-Way Rectangular Core, 3RLA
B B3RL
FPM 200 300 400 500 600 700Ps .014 .033 .058 .090 .130 .177
Neck Size Pt .017 .038 .068 .106 .152 .2079 x 6" CFM 75 113 150 188 225 263
Ak .150 Throw A 3-6 8-12 11-17 14-24 20-28 24-34Throw B 3-6 7-12 11-18 16-23 21-29 24-32
NC
-
UH-Series 4-Way Rectangular CoreB
A 4L AB
FPM 200 300 400 500 600 700Ps .014 .033 .058 .090 .130 .177
Neck Size Pt .017 .038 .068 .106 .152 .2079 x 6" CFM 75 113 150 188 225 263
Ak .151 Throw A 2-4 6-10 11-17 16-22 20-28 24-33Throw B 3-6 8-12 11-18 17-24 21-29 25-35
NC
-
UH-Series 4-Way Square Core
FPM 200 300 400 500 600 700Ps .013 .031 .052 .080 .120 .162
Neck Size Pt .016 .035 .062 .099 .140 .1926 x 6" CFM 50 75 100 125 150 175Ak .10 Throw 2-4 6-10 10-16 15-21 19-27 23-32
NC
-
alexNoteDD103-A REPLACED WITH "URC5.PDF" FROM ANDY'S PUBLIC
-
URC5 Supply/Return (pg. 1 of 3)Louvered Supply / Cube Core Return
Neck Velocity FPM 200 300 400 500 600 700 800Face Velocity FPM 500 750 1000 1250 1500 1750 2000
Ps .014 .030 .060 .080 .130 .160 .220Pt .018 .060 .080 .120 .170 .210 .270
Supply12 x 12" CFM 90 135 180 225 270 315 360Ak .17 Throw 2-4 3-5 5-7 6-9 6-12 7-13 8-14Return CFM 68 101 135 169 203 236 2709 x 9" IN Veloc. 121 180 241 301 363 421 482Ak .55 Ps .01 .01 .01 .01 .02 .03 .04
NC
-
URC5 Supply/Return (pg. 2 of 3)Louvered Supply / Cube Core Return
Neck Velocity FPM 200 300 400 500 600 700 800Face Velocity FPM 500 750 1000 1250 1500 1750 2000
Ps .014 .030 .060 .080 .130 .160 .220Pt .018 .060 .080 .120 .170 .210 .270
Supply27 x 27" CFM 550 825 1100 1375 1650 1925 2200Ak 1.09 Throw 3-5 4-8 5-11 6-13 8-16 10-20 13-25Return CFM 413 619 825 1031 1238 1444 1650
18 x 18" IN Veloc. 184 275 367 458 550 642 550Ak 2.24 Ps .01 .01 .02 .04 .05 .07 .08
NC
-
URC5 Supply/Return (pg. 3 of 3)Louvered Supply / Cube Core Return
Neck Velocity FPM 200 300 400 500 600 700 800Face Velocity FPM 500 750 1000 1250 1500 1750 2000
Ps .014 .030 .060 .080 .130 .160 .220Pt .018 .060 .080 .120 .170 .210 .270
Supply42 x 42" CFM 1195 1793 2390 2988 3585 4183 4780Ak 2.39 Throw 4-10 8-17 11-21 15-24 18-33 24-38 25-45Return CFM 896 1345 2175 2241 2689 3137 3585
30 x 30" IN Veloc. 142 213 345 356 427 498 569Ak 6.24 Ps .01 .01 .02 .03 .04 .05 .06
NC
-
alexNoteDD201-B REPLACED WITH "MCD.PDF" FORM ANDY'S PUBLIC
-
MC Modular Core 1-Way
Neck Velocity FPM 200 300 400 500 600 700Ps .007 .020 .030 .050 .070 .100Pt .014 .030 .050 .080 .118 .160
CFM 50 75 100 125 150 1756 x 6" Throw 3--6 5-8 7-10 8-12 10-14 12-16
Ak .112 NC
-
MC Modular Core 2-Way, 2-Way Corner
Neck Velocity FPM 200 300 400 500 600 700Ps .007 .020 .030 .050 .070 .100Pt .014 .030 .050 .080 .118 .160
CFM 50 75 100 125 150 1756 x 6" Throw 2-4 3-6 5-7 6-8 7-10 8-11
Ak .112 NC
-
MC Modular Core 3-Way
Neck Velocity FPM 200 300 400 500 600 700Ps .007 .020 .030 .050 .070 .100Pt .014 .030 .050 .080 .118 .160
CFM 50 75 100 125 150 1756 x 6" Throw A 1-3 2-4 3-5 3-6 4-7 6-8
Throw B 2-4 3-6 5-7 6-8 7-10 8-11Ak .112 NC
-
MC Modular Core 4-Way
Neck Velocity FPM 200 300 400 500 600 700Ps .007 .020 .030 .050 .070 .100Pt .014 .030 .050 .080 .118 .160
CFM 50 75 100 125 150 1756 x 6" Throw 1-3 2-4 3-5 4-6 5-7 6-8
Ak .112 NC
-
LPB-40 Linear Plenum Boot Diffuser, 1 & 2 Slot
MODEL LPB-40, 1 SLOT (1 3/4" Wide)2 FT CFM 20 40 60 80 100 120 140
Ak .067 Ps 0.01 0.03 0.06 0.11 0.17 0.25 0.34NC
-
LPB-40 Linear Plenum Boot Diffuser, 3 & 4 Slot
MODEL LPB-40, 3 SLOT (5 1/4")2 FT CFM 60 120 180 240 300 360 420
Ak .200 Ps 0.01 0.03 0.06 0.11 0.17 0.25 0.34NC
-
LPB-60 Linear Plenum Boot Diffuser, 1 & 2 Slot
MODEL LPB-60, 1 SLOT (2" Wide)2 FT CFM 20 40 60 80 100 120 140
Ak .082 Ps 0.01 0.02 0.04 0.08 0.12 0.17 0.23NC
-
LPB-60 Linear Plenum Boot Diffuser, 3 & 4 Slot
MODEL LPB-60, 3 SLOT (6" Wide)2 FT CFM 60 120 180 240 300 360 420
Ak .247 Ps 0.01 0.02 0.04 0.08 0.12 0.17 0.23NC
-
LPB Linear Plenum Boot Diffuser (Return)
AK = 0.08 / FT OF SLOT CFM/FT 10 20 30 40 50 60 70
Ps 0.01 0.01 0.02 0.03 0.05 0.07 0.10NC
-
LPB-X-750 Linear Plenum Boot Diffuser, 1 Slot
MODEL LPB-X, SIZE 750, HORIZONTAL PATTERN (3/4" Wide)2 FT CFM 20 40 60 80 100 120 140
Ak .049 Ps 0.01 0.05 0.12 0.20 0.32 0.46 0.63NC
-
LPB-X-1250 Linear Plenum Boot Diffuser, 1 Slot
MODEL LPB -X, SIZE 1250, HORIZONTAL PATTERN (1 1/4" Wide)2 FT CFM 20 40 60 80 100 120 140
Ak .082 Ps 0.01 0.02 0.04 0.07 0.11 0.16 0.21NC
-
HID Return Performance, All Models
2FT CFM 20 40 60 80 100 120 140Ak=0.200 Ps 0.01 0.01 0.02 0.03 0.05 0.07 0.10
NC
-
HID High Induction Linear Diffuser, H-500 & HV-500
MODEL HID-H-500, Horizontal Pattern2 FT CFM 20 40 60 80 100 120 140
Ak 0.067 Ps 0.01 0.02 0.05 0.09 0.15 0.21 0.29NC
-
HID High Induction Linear Diffuser, HV-500
MODEL HID-HV-500, Horizontal-Vertical Pattern, 10% Down Blow2 FT CFM 20 40 60 80 100 120 140
Ak 0.033 Ps 0.01 0.03 0.08 0.14 0.21 0.31 0.42NC
-
HID High Induction Linear Diffuser, H-750 & HV-750
MODEL HID-H-750, Horizontal Pattern2 FT CFM 40 60 80 100 120 140 160
Ak 0.086 Ps 0.02 0.04 0.06 0.10 0.14 0.20 0.26NC
-
HID High Induction Linear Diffuser, HV-750
MODEL HID-HV-750, Horizontal-Vertical Pattern, 10% Down Blow2 FT CFM 20 40 60 80 100 120 140
Ak 0.043 Ps 0.01 0.02 0.05 0.09 0.14 0.23 0.28NC
-
HID-V High Induction Vertical Pattern Linear Diffuser
MODEL HID-V-3752 FT CFM 20 40 60 80 100 120 140
Ak 0.032 Ps 0.05 0.20 0.44 0.79 1.23 1.78 2.42NC 20 22 33 40 46 51 55
Throw 3-6-11 8-11-16 11-14-19 13-16-22 14-18-25 16-19-27 17-21-303 FT CFM 30 60 90 120 150 180 210
Ak 0.048 Ps 0.05 0.20 0.44 0.79 1.23 1.78 2.42NC 20 24 35 42 48 53 57
Throw 4-7-14 10-14-19 14-17-24 16-19-27 18-22-31 19-24-34 21-26-364 FT CFM 40 80 120 160 200 240 280
Ak 0.064 Ps 0.05 0.20 0.44 0.79 1.23 1.78 2.42NC 20 26 36 44 50 54 58
Throw 4-9-16 11-16-22 16-19-27 18-22-32 20-25-35 22-27-39 24-30-425 FT CFM 50 100 150 200 250 300 350
Ak 0.80 Ps 0.05 0.20 0.44 0.79 1.23 1.78 2.42NC 220 27 37 45 51 56 60
Throw 5-10-18 13-18-25 18-22-31 20-25-35 23-28-40 25-31-43 27-33-47
MODEL HID-V-750 2 FT CFM 20 40 60 80 100 120 140
Ak 0.044 Ps 0.01 0.04 0.10 0.17 0.27 0.38 0.52NC 20 20 20 25 31 36 40
Throw 2-4-10 7-10-16 10-14-19 13-16-22 14-18-25 16-19-27 17-21-303 FT CFM 30 60 90 120 150 180 210
Ak 0.066 Ps 0.01 0.04 0.10 0.17 0.27 0.38 0.52NC 20 20 20 27 33 38 42
Throw 2-5-13 8-13-19 13-17-24 16-19-27 18-22-31 19-24-34 21-26-364 FT CFM 40 80 120 160 200 240 280
Ak 0.88 Ps 0.01 0.04 0.10 0.17 0.27 0.38 0.52NC 20 20 21 28 34 39 43
Throw 3-6-15 10-15-22 15-19-27 18-22-32 20-25-35 22-27-39 24-30-425 FT CFM 50 100 150 200 250 300 350
Ak 0.110 Ps 0.01 0.04 0.10 0.17 0.27 0.38 0.52NC 20 20 22 25 35 40 44
Throw 3-7-16 11-16-25 16-22-31 20-25-35 23-28-40 25-31-43 27-33-47Notes:1. NC based on 10db room attenuation.2. Throw (150-100-50 FPM).3. Size 8" collar utilized.4. Throw based on isothermal air.
-
LS Linear Slot, Return Air Performance (pg. 1 of 2)
1/2" Slots (For Plenum Application)SLOTS Ps .011 .024 .045 .070 .108 .184 .279 .421
CFM/Ft 10 15 20 25 30 40 50 60NC
-
LS Linear Slot, Return Air Performance (pg. 2 of 2)
1" Slots (For Plenum Application)SLOTS Ps .020 .045 .070 .110 .165 .215 .291 .471
CFM/Ft 20 30 40 50 60 70 80 100NC
-
LS-50, " Slot Supply
CFM/FT 10 15 20 25 30 40 50 60 70 80Pt .014 .034 .056 .081 .122 .206 .310 .423 .557 .625NC
-
LS-75, " Slot Supply
CFM/FT 10 15 20 25 30 40 50 60 70 80Pt 0.011 0.028 0.038 0.056 0.080 0.162 0.207 0.359 0.475 0.580NC
-
LS-10, 1" Slot Supply
CFM/FT 10 15 20 25 30 40 50 60 70 80Pt .008 .020 .022 .031 .038 .104 .118 .295 .393 .535NC
-
Bar Grille Sidewall Supply
Sidewall Supply: 0, 15, and 30 DeflectionNeck Vel. FPM 500 700 900 1000 1100 1200 1300
Neck Height Ps .012 .024 .040 .050 .060 .072 .084CFM/Ft 20 28 36 40 44 48 52
Pt .016 .031 .051 .062 .075 .090 .105Throw/Ft 8-11 11-16 13-18 14-20 15-22 17-24 17-25
Drop 4 5 5 4.5 5 5 5NC
-
Bar Grille Sill Supply
Sill Supply: 0, 15, and 30 DeflectionNeck Vel. FPM 500 700 900 1000 1100 1200 1300
Neck Height Ps .012 .024 .040 .050 .060 .072 .084CFM/Ft 20 28 36 40 44 48 52
Pt .016 .031 .051 .062 .075 .090 .105Throw/Ft 6-9 9-13 10-14 11-16 13-18 13-19 14-20
NC
-
Bar Grille Floor Supply
Floor Supply: 0, 15, and 30 DeflectionNeck Vel. FPM 500 700 900 1000 1100 1200 1300
Neck Height Ps .012 .024 .040 .050 .060 .072 .084CFM/Ft 20 28 36 40 44 48 52
Pt .016 .031 .051 .062 .075 .090 .105Throw/Ft 6-9 9-13 10-14 11-16 13-18 13-19 14-20
NC
-
Bar Grille Floor Return Supply
Return: 0, 15, and 30 DeflectionNECK VEL. FPM 150 200 250 300 350 400 450 500
NECK HEIGHT Ps(-) .020 .030 .040 .060 .080 .100 .120 .150CFM 20 26 33 39 46 52 59 65NC
-
alexNoteSG101-A REPLACED WITH "V OR H.PDF" FROM ANDY'S PUBLIC
-
Selection Procedures V Series Vane DeflectionVANE DEFLECTIONThe vane deflection, upon which the data is based, is shown on the deflection settings chart below. The effective area is changed by changing the blade setting. The throw, drop, total pressure, and noise is is altered by changing the vane deflection.
THROW & DROPThrow and drop are based on a 50 FPM terminal velocity and a 20 difference between supply airand average room temperature on cooling cycle.
VELOCITYThe velocity shown in the chart is face velocity (FPM). This velocity is measured with an Alnor Velometerwith tip number 2220A. The velometer tip should be held flush on the face of the grille. At least four readings should be taken at random over the grille face and averaged.
TOTAL PRESSURETotal pressure is measured in inches of water gage (W.G.). If static pressure is required, calculate the core area (nominal length - 1/4") x (nominal width - 1/4") and divide the CFM by that area to determine the core velocity. Using this velocity, refer to the table below to find velocity pressure. Subtract velocity pressure fromthe total pressure to obtain static pressure across the grille.
SOUNDThe NC Sound data is based on a room attenuation of 8 decibels (dB) and a sound power level(re: 10 -12 watts).
CORE VELOCITYVELOCITY PRESSURE
(FPM) in. W.G.250 .004300 .006350 .008400 .010450 .013500 .016550 .019600 .022650 .026700 .031750 .035800 .040
VELOCITY PRESSURE CONVERSION CHART
Blade Deflection Settings
-
Supply: V, H, VH, HV, - EV, EH, EVH, EHV (pg. 1 of 2)
Neck Velocity FPM 300 400 500 600 700 800 1000 1200 1400 1600 1800
Pv .006 .010 .016 .022 .031 .040 .062 .090 .122 .159 .202Pt .017 .029 .047 .065 .088 .117 .181 .265 .358 .467 .593
CFM 35 50 60 70 85 95 120 140 165 190 210Throw 4-12 5-14 7-16 8-17 9-19 11-20 13-22 14-24 15-26 16-28 17-30Drop 3 3.5 4 4 4.5 4.5 5 5 6 6 6NC
-
Supply: V, H, VH, HV, - EV, EH, EVH, EHV (pg. 2 of 2)
Neck Velocity FPM 300 400 500 600 700 800 1000 1200 1400 1600 1800
Pv .006 .010 .016 .022 .031 .040 .062 .090 .122 .159 .202Pt .017 .029 .047 .065 .088 .117 .181 .265 .358 .467 .593
36 x 6" CFM 400 535 670 805 940 1070 1340 1610 1880 2140 241018 x 12" Throw 11-36 16-42 20-47 24-51 28-56 32-59 39-65 42-72 45-78 48-83 51-8916 x 14" Drop 12 12.5 14 15 17.5 18.5 19 22 22.5 23 24
NC
-
Curved Blade Factors1. Performance data based on PATTERN "B" (15) setting with an OBD.2. Data is based on isothermal air.3. Apply the following factors to tabulated data for other blade settings and for units without OBD.4. Static Pressure is in inches w.g.5. Throw is based on terminal velocities of 100 and 50 FPM.6. NC is based on an average room attenuation of 8dB.7. Drop may be determined as follows: (blade settings)
A - (0 - see chart) Pattern stays on the ceiling.B - (15 - see chart) 10% of the throw.C - (30 - see chart) 20% of the throw.D - (45 - see chart) 30% of the throw.
8. When diffuser is mounted away from the ceiling (exposed duct), throw is reduced approximately 5% - 15% and drop is increased 5% to 15%.
A x 1.43 x 1.3 + 2B x 1.0 x 1.0 + 0C x .79 x .72 - 3D x .64 x .52 - 4
A x 1.43 x 1.2 + 0B x 1.0 x .85 - 3C x .79 x .61 - 4D x .64 x .33 - 6
WITHOUT OBDBlade
Setting Throws S.P. NC
WITH OBD
Throws S.P. NCBlade Setting
-
CL1 Curved BladeNeck Vel. FPM 300 400 500 600 700 800 900 1000Neck Size Ps .040 .040 .110 .160 .220 .290 .360 .440
CFM 55 73 91 109 127 145 163 1818 x 4 Throw 5-9 8-13 10-13 12-20 14-22 15-22 17-28 18-30
NC
-
CL2, CLCR, CLCL Curved BladeNeck Vel. FPM 300 400 500 600 700 800 900 1000Neck Size Ps .040 .040 .110 .160 .220 .290 .360 .440
CFM 55 73 91 109 127 145 163 1818 x 4 Throw 5-8 6-10 8-13 10-16 11-19 13-21 14-23 16-26
NC
-
CL3, CLA3 Curved BladeNeck Vel. FPM 300 400 500 600 700 800 900 1000Neck Size Ps .040 .040 .110 .160 .220 .290 .360 .440
CFM 55 73 91 109 127 145 163 1818 x 4 Throw 5-8 6-10 7-12 9-15 10-17 11-19 13-21 14-23
NC
-
CL4 Curved BladeNeck Vel. FPM 300 400 500 600 700 800 900 1000Neck Size Ps .040 .040 .110 .160 .220 .290 .360 .440
CFM 55 73 91 109 127 145 163 1818 x 4 Throw 4-7 5-9 7-11 8-13 9-15 10-17 12-20 13-22
NC
-
grille@tech@incN
08/06/05IG
noteZ@@all@drawings@subject@to@change@without@prior@noticeN
QMQOTB
RSMSOTB
RSMSOTB
model@raVa
aluminum@panel@return jr PXOPVOPU ntsig
raVa
titleZ
ckd@byZ dateZ revZ
drn@byZ dateZ scaleZ drawing@noN
@@c@@
@@s@@@@l@@M@e@
@@sMwL@d@QPPE@p@@@p@c@pN@@TU@f@@@@@@@N@@s@L@M@ML@@@@M@@N
@@a@@@N@@m@@RSMSOTB@xRSMSOTB@@@@N
m@sc
QR@@QR
RT@@RT x
V@@V
x x
Y@@Y QX@@QX
x x
QU@@QU
x
RQ@@RQ
s@af@
RSMSOTB@square
CONSTRUCTION:
FEATURES:
TU@fixed@blade@core
YMQORB
-
grille@tech@incN
08/06/05IG
noteZ@@all@drawings@subject@to@change@without@prior@noticeN
RSMSOTB
RSMSOTB
SMQORB
model@raVau
aluminum@panel@return jr PXOPVOPU ntsig
raVau
t@@@@@@@@
@N
@@@@@@L@@
ckd@byZ dateZ
titleZ
drn@byZ dateZ
noteZ
revZ
drawing@noNscaleZ
@@a@@@N
@@@M@@N@@s@L@M@ML@@@N@@TU@f@@@@@@@p@c@pN@@sMwL@d@QPPE@p@
@@l@@M@e@@@s@@
@@c@@
@@c@@rV@@
@@m@@RSMSOTB@xRSMSOTB@@@@N
m@sc
QR@@QR
RT@@RT x
V@@V
x x
Y@@Y QX@@QX
x x
QU@@QU
x
RQ@@RQ
s@af@
TU@fixed@blade@core
FEATURES:
CONSTRUCTION:
RSMSOTB@square
moldedback
-
RA, RAF/FS, RAF/GS, RAOB ReturnsNeck Vel. FPM 300 400 450 500 550 600 650 700 750 800 900Neck Size Ps .020 .030 .040 .040 .050 .060 .070 .080 .090 .110 .130
6 x 6" CFM 50 70 75 85 95 100 110 120 125 135 155Ak = .17 NC
-
RAHD Return
Neck Size CFM 500 900 1500 2000 3000 4000 5000Neck Vel. 500 900
12 x 12" Ps .014 .045Ak = .200 NC 30 35
Neck Vel. 281 506 84416 x 16" Ps .004 .014 .040Ak = .350 NC 30 30 35
Neck Vel. 222 400 667 88918 x 18" Ps .003 .009 .025 .044Ak = .440 NC 25 30 35 35
Neck Vel. 325 540 72020 x 20 Ps .006 .016 .029
Ak = .550 NC 30 30 35Neck Vel. 225 375 500 750
24 x 24" Ps .003 .008 .014 .031Ak =.790 NC 25 30 30 35
Neck Vel. 300 400 600 80024 x 30" Ps .005 .009 .020 .036Ak = .990 NC 30 30 35 35
Neck Vel. 281 375 563 75032 x 24" Ps .004 .008 .018 .031
Ak = 1.050 NC 30 30 30 35Neck Vel. 250 375 500 625
36 x 32" Ps .003 .008 .014 .022Ak = 1.580 NC 25 30 30 35
Neck Vel. 222 333 444 55636 x 36" Ps .003 .006 .011 .017
Ak = 1.780 NC 25 30 30 30Notes:1. NC sound data based on sound power level re: 10 - 12 watts.2. For specific information on allowable noise levels, consult the latest addition of ASHRAE Guide and Data Book "Fundamentals and Equipment."
-
grille@tech@incN
08/06/05IG
noteZ@@all@drawings@subject@to@change@without@prior@noticeN
QMQOTB
RSMSOTB
RSMSOTB
model@racUVa
aluminum@panel@return jr PXOPVOPU ntsig
racUVa
titleZ
ckd@byZ dateZ revZ
drn@byZ dateZ scaleZ drawing@noN
@@c@@
@@s@@@@l@@M@e@
@@sMwL@d@QPPE@p@@@p@c@pN@@s@L@M@ML@@@@M@@N
@@QORB@x@QORB@x@QORB@a@@@N
RT@@RT
m@scf@
x x x
s@a
x x x
RQ@@RQV@@V Y@@Y QR@@QR QU@@QU QX@@QX
@@m@@RSMSOTB@xRSMSOTB@@@@N
RSMSOTB@square
CONSTRUCTION:
FEATURES:
YMQORB
cube@core
-
grille@tech@incN
08/06/05IG
noteZ@@all@drawings@subject@to@change@without@prior@noticeN
SMQORB
RSMSOTB
RSMSOTB
model@racUVau
aluminum@panel@return jr PXOPVOPU ntsig
racUVau
titleZ
ckd@byZ dateZ revZ
drn@byZ dateZ scaleZ drawing@noN
@@c@@rV@@
@@c@@
@@s@@@@l@@M@e@
@@sMwL@d@QPPE@p@@@p@c@pN
@@L@@@@@@
@N
@@@@@
noteZt@@@
@@s@L@M@ML@@@@M@@N
@@QORB@x@QORB@x@QORB@a@@@N
RT@@RT
m@scf@
x x x
s@a
x x x
RQ@@RQV@@V Y@@Y QR@@QR QU@@QU QX@@QX
@@m@@RSMSOTB@xRSMSOTB@@@@N
RSMSOTB@square
moldedback
CONSTRUCTION:
FEATURES:
YMQORB
cube@core
-
RAC5, RAC5/FS, RACF/GS, RAC5OBEggcrate Return / Exhaust Registers and Grilles
Neck Vel. FPM 300 400 500 600 700 800 1000 1200 1400 1500Neck Size Ps(-) .016 .026 .042 .059 .082 .106 .165 .238 .323 .371
6 x 6" CFM 54 72 90 108 126 144 180 216 252 270Ak =.08 NC 25 28 30 32 33 43 36 38 40 408 x 6" CFM 78 104 130 156 182 208 260 312 364 390
Ak = .26 NC 24 27 29 31 32 43 36 38 39 4010 x 6" CFM 102 136 170 204 238 272 340 408 476 510Ak = .34 NC 23 26 28 30 32 33 35 37 38 3910 x 8" CFM 138 184 230 276 322 368 460 552 644 690Ak = .46 NC 23 26 28 30 31 32 35 36 38 3912 x 6" CFM 117 156 195 234 273 312 390 468 546 585Ak = .39 NC 23 26 28 30 31 33 35 37 38 3912 x 8" CFM 180 240 300 429 480 600 720 840 900 940Ak =.60 NC 22 25 27 27 29 31 32 34 36 3712 x 10" CFM 207 276 345 414 483 552 690 828 966 1035Ak = .69 NC 22 25 27 29 30 32 34 36 37 3812 x 12" CFM 270 360 450 540 630 720 900 1080 1260 1350Ak = .90 NC 21 24 26 28 30 31 33 35 36 3716 x 16" CFM 480 640 800 960 1120 1280 1600 1920 2240 2400Ak = 1.60 NC 20 23 25 27 29 30 32 34 35 3618 x 6" CFM 180 240 300 360 420 480 600 720 840 900Ak = .60 NC 22 25 27 29 31 32 34 36 37 3818 x 10" CFM 321 428 536 642 749 856 1070 1284 1498 1605Ak = 1.07 NC 21 24 26 28 29 31 33 35 36 3718 x 12" CFM 402 536 670 804 938 1072 1340 1608 1876 2010Ak = 1.34 NC 21 23 26 27 29 30 32 34 36 3618 x 18" CFM 624 832 1040 1248 1456 1664 2080 2496 2912 3120Ak = 1.80 NC 20 23 25 27 28 29 32 33 35 3524 x 12" CFM 540 720 900 1080 1260 1440 1800 2160 2520 2700Ak =1.8 NC 20 23 25 27 28 30 32 34 35 3624 x 18" CFM 834 1112 1390 1668 1946 2224 2780 3336 3892 4170Ak = 2.78 NC 19 22 24 26 27 29 31 33 34 3524 x 24" CFM 1083 1444 1805 2166 2527 2888 3610 4332 5054 5415Ak = 3.61 NC 19 21 24 25 27 28 30 32 34 3430 x 12" CFM 624 832 1040 1248 1456 1664 2080 2496 2912 3120Ak = 2.08 NC 20 23 25 27 28 29 32 33 35 3530 x 18" CFM 1083 1444 1805 2166 2527 2888 3610 4332 5054 5415Ak = 3.61 NC 19 21 24 25 27 28 30 32 34 3430 x 24" CFM 1395 1860 2325 2790 3255 3720 4650 5580 6510 6975Ak = 4.65 NC 18 21 23 25 26 28 30 32 33 3430 x 30" CFM 1875 2500 3125 3750 4375 5000 6250 7500 8750 9375Ak = 6.25 NC 17 20 22 24 26 27 29 31 33 3336 x 18" CFM 1287 1716 2145 2574 3003 3432 4290 5148 6006 6435Ak = 4.29 NC 18 21 23 25 27 28 30 32 33 3436 x 24" CFM 1674 2232 2790 3348 3906 4464 5580 6696 7812 8370Ak = 5.58 NC 18 21 23 24 26 27 29 31 33 33
Notes:1. NC based on a room sound absorption of 10db.2. For filter grilles add .05 to stated Ps values shown.3. For specific information on allowable noise levels, consult the latest edition of ASHRAE Guide and Data Book "Fundamentals and Equipment."
-
grille@tech@incN
IG 08/06/05
noteZ@@all@drawings@subject@to@change@without@prior@noticeN
RSMSOTB
RSMSOTBRSMSOTB
@@c@@
@@s@@
@@c@@rV@@@@QORB@x@QORB@x@QORB@@@@N@@r@@O@@N
@@l@@M@e@
@@sMwL@d@QPPE@p@
model@clrcube@core@removable@face
molded@backL@ceiling@return jr PXOPVOPU ntsig
clr
titleZ
revZ
drn@byZ
ckd@byZ dateZ
dateZ drawing@noNscaleZ
noteZ
@@@@@
@N@@L@@@@@@
t@@@
@@@L@@@@R@@N
@@@@@@@@R@@@@@@@N@@@f@
@@@f@@
@@p@c@pN
@@p@@@RR@@N
@@@@@r@N
@@QB@t@@N
CONSTRUCTION:
FEATURES:
cube@coreremovable@face
removable@facecube@core
moldedback
TMQORB
RSMSOTB@square
RSMSOTB
OPTIONAL ACCESSORIES:
-
grille@tech@incN
08/06/05IG
noteZ@@all@drawings@subject@to@change@without@prior@noticeN
RSMSOTBRSMSOTB
RSMSOTBRSMSOTB
RMQORB
model@rafVa
aluminum@panel@return@wOfilter jr PXOPVOPU ntsig
rafVa
titleZ
ckd@byZ dateZ revZ
drn@byZ dateZ scaleZ drawing@noN
@@c@@
@@s@@@@l@@M@e@
@@sMwL@d@QPPE@p@@@p@c@pN@@TU@f@@@@@@@N
@@s@L@M@ML@@@@M@@N
@@a@@@N
@@@@@@@N@@f@@@@@@
@@m@@RSMSOTB@xRSMSOTB@@@@N
m@sc
QR@@QR
RT@@RT x
V@@V
x x
Y@@Y QX@@QX
x x
QU@@QU
x
RQ@@RQ
s@af@
CONSTRUCTION:
FEATURES:
TU@fixed@blade@core
TU@fixed@blade@coreremovable@face
RSMSOTB@squarefilter
-
grille@tech@incN
08/06/05IG
noteZ@@all@drawings@subject@to@change@without@prior@noticeN
RSMSOTBRSMSOTB
RSMSOTBRSMSOTB
UMQORB
model@rafVau
aluminum@panel@return@wOfilter jr PXOPVOPU ntsig
rafVau
titleZ
ckd@byZ dateZ revZ
drn@byZ dateZ scaleZ drawing@noN
@@c@@rV@@
@@c@@
@@s@@@@l@@M@e@
@@sMwL@d@QPPE@p@@@p@c@pN
@@L@@@@@@
@N
@@@@@
noteZt@@@
@@TU@f@@@@@@@N
@@s@L@M@ML@@@@M@@N
@@a@@@N
@@@@@@@N@@f@@@@@@
@@m@@RSMSOTB@xRSMSOTB@@@@N
m@sc
QR@@QR
RT@@RT x
V@@V
x x
Y@@Y QX@@QX
x x
QU@@QU
x
RQ@@RQ
s@af@
CONSTRUCTION:
FEATURES:
TU@fixed@blade@core
TU@fixed@blade@coreremovable@face back
molded
RSMSOTB@squarefilter
-
grille@tech@incN
08/06/05IG
noteZ@@all@drawings@subject@to@change@without@prior@noticeN
RSMSOTBRSMSOTB
RSMSOTBRSMSOTB
UMQORB
model@raftu
return@tMbar@wOfilter jr PXOPVOPU ntsig
raftu
titleZ
ckd@byZ dateZ revZ
drn@byZ dateZ scaleZ drawing@noN
@@c@@rV@@
@@c@@
@@s@@@@l@@M@e@
@@sMwL@d@QPPE@p@@@p@c@pN
@@L@@@@@@
@N
@@@@@
noteZt@@@
@@TU@f@@@@@@@N@@f@@@@@@@@@@@@@N@@s@L@M@ML@@@@M@@N
removable@faceTU@fixed@blade@core
RSMSOTB@square
moldedback
CONSTRUCTION:
FEATURES:
TU@fixed@blade@coreremovable@face
filter
-
RAP, RAPF Perforated Return
Size 8x8 10x10 12x12 14x14 16x16 18x18 20x20 22x22 24x24 30x24 36x24 40x24 44x24 48x24Ak .36 .56 .80 1.09 1.42 1.80 2.22 2.69 3.20 4.00 4.80 5.33 5.87 6.40
Nk Vel 450 288 200NC 30-35 30-35 25-30Ps .003 .001 .001
Nk Vel 900 576 400 294 225NC 35-40 30-35 35-40 35-40 25-30Ps .012 .005 .002 .001 .001
Nk Vel 864 600 441 338 267 216NC 35-40 30-35 30-35 30-35 30-35 25-30Ps .011 .005 .003 .002 .001 .001
Nk Vel 800 588 450 356 288 238 200NC 35-40 30-35 30-35 30-35 30-35 25-30 25-30Ps .010 .005 .003 .002 .001 .001 .001
Nk Vel 735 563 444 360 298 250 200NC 35-40 30-35 30-35 30-35 30-35 25-30 25-30Ps .008 .005 .003 .002 .001 .001 .001
Nk Vel 882 675 533 432 357 300 240 200NC 35-40 35-40 30-35 30-35 30-35 30-35 25-30 25-30Ps .012 .007 .004 .003 .002 .001 .001 .001
Nk Vel 787 622 504 417 350 280 233 210NC 35-40 35-40 30-35 30-35 30-35 30-35 25-30 25-30Ps .009 .006 .004 .003 .002 .001 .001 .001
Nk Vel 900 711 576 476 400 320 267 240 218 200NC 35-40 35-40 30-35 30-35 30-35 30-35 30-35 25-30 25-30 25-30Ps .012 .008 .005 .003 .002 .002 .001 .001 .001 .001
Nk Vel 800 648 536 450 360 300 270 245 225NC 35-40 35-40 30-35 30-35 30-35 30-35 30-35 25-30 25-30Ps .010 .006 .004 .003 .002 .001 .001 .001 .001
Nk Vel 889 720 595 500 400 333 300 273 250NC 35-40 35-40 30-35 30-35 30-35 30-35 30-35 30-35 25-30Ps .012 .008 .005 .004 .002 .002 .001 .001 .001
Nk Vel 864 714 600 480 400 360 327 300NC 35-40 35-40 30-35 30-35 30-35 30-35 30-35 30-35Ps .011 .008 .005 .004 .002 .002 .002 .001
Nk Vel 833 700 560 467 420 382 350NC 35-40 35-40 30-35 30-35 30-35 30-35 30-35Ps .011 .007 .005 .003 .003 .002 .002
Nk Vel 800 640 533 480 436 400NC 35-40 35-40 30-35 30-35 30-35 30-35Ps .010 .006 .004 .004 .003 .002
Nk Vel 900 720 600 540 491 450NC 35-40 35-40 30-35 30-35 30-35 30-35Ps .012 .008 .005 .004 .004 .003
Notes:1. Ps - negative static pressure in inches of water. 2. For filter grilles add .05 to listed Ps for added resistance through the filter.3. All dimensions are in inches.
1600
200
400
600
800
3200
3600
CFM
1800
2000
2400
2800
1000
1200
1400
-
DGS, DGF Non-Vision Door Grilles (Aluminum)
*Face Vel. 100 FPM 200 FPM 300 FPM 400 FPM 500 FPMPs Drop .010 .037 .083 .150 .220
Effective Area(Square Ft.)
12 x 6" 0.30 30 60 90 120 15012 x 8" 0.40 40 80 120 160 20012 x 10" 0.52 50 105 155 210 26012 x 12" 0.62 60 125 185 250 31018 x 12" 0.97 95 195 290 390 48524 x 12" 1.31 130 260 395 525 65524 x 16" 1.76 175 350 530 705 88036 x 12" 2.00 200 400 600 800 100030 x 16 2.25 225 450 675 900 112536 x 16" 2.75 275 550 825 1100 137530 x 24" 3.50 350 700 1050 1400 175036 x 24" 4.23 425 845 1270 1690 211548 x 24" 5.80 580 1160 1740 2320 290036 x 36" 6.60 660 1320 1980 2640 3300
Notes:* Face Velocity and Effective Area based on 4" Rotating Vane Anemometer.Determine CFM using these steps:1. Find the effective area of the grille. 2. Using a 4" Rotating Vane Anemometer measure the velocity on the intake side of the grille.3. Determine CFM using the following equation: CFM = Effective Area x Measured Face Velocity.
CFM CFM CFMSIZE
CFM CFM
-
alexNoteAC101-A REPLACED WITH "OBD -GTI.PDF" FROM ANDY'S PUBLIC
-
alexNoteAC101-B REPLACED WITH "PBD -GTI.PDF" FROM ANDY'S PUBLIC
-
WLC, WLF, and WLF-DA Wall Louvers
Free Area (Square Feet)
SIZE 12" 16" 20" 24" 28" 32" 36" 40" 44" 48" 52" 56" 60"12" .2 .3 .4 .4 .5 .6 .7 .8 .9 1.0 1.1 1.1 1.216" .3 .4 .5 .7 .9 1.0 1.2 1.2 1.4 1.6 1.7 1.8 2.020" .5 .6 .8 1.0 1.2 1.4 1.5 1.8 2.0 2.2 2.3 2.5 2.624" .7 .9 1.1 1.3 1.5 1.7 1.9 2.3 2.5 2.8 3.0 3.2 3.528" .8 1.0 1.3 1.6 1.9 2.2 2.5 2.8 3.1 3.6 3.7 4.0 4.232" .8 1.2 1.5 1.9 2.2 2.6 2.9 3.3 3.6 3.9 4.3 4.6 5.036" .9 1.4 1.8 2.2 2.6 2.9 3.3 3.7 4.1 4.5 5.0 5.3 5.740" 1.1 1.5 1.9 2.4 2.9 3.3 3.8 4.2 4.7 5.1 5.6 6.1 6.544" 1.2 1.6 2.2 2.7 3.2 3.7 4.3 4.8 5.6 5.7 6.2 6.9 7.248" 1.3 1.9 2.5 3.0 3.6 4.1 4.7 5.6 5.8 6.3 6.9 7.5 8.052" 1.5 2.1 2.7 3.3 3.9 4.5 5.1 5.7 6.3 6.9 7.5 8.1 8.756" 1.6 2.4 2.9 3.6 4.3 4.9 5.6 6.2 6.9 7.5 8.2 8.8 9.560" 1.7 2.5 3.2 3.9 4.6 5.3 6.0 6.7 7.4 8.1 8.8 9.6 10.364" 1.8 2.6 3.4 4.1 4.9 5.6 6.4 7.2 8.0 8.7 9.5 10.2 11.068" 1.9 2.8 3.6 4.4 5.2 6.1 6.9 7.7 8.5 9.3 10.1 10.9 11.872" 2.1 3.0 3.8 4.7 5.6 6.5 7.3 8.2 9.0 10.0 10.8 11.6 12.676" 2.2 3.2 4.1 5.0 5.9 6.8 7.7 8.7 9.6 10.5 11.4 12.3 13.380" 2.4 3.3 4.3 5.3 6.2 7.2 8.2 9.2 10.1 11.1 12.1 13.1 14.084" 2.5 3.5 4.5 5.5 6.6 7.6 8.6 9.6 10.7 11.7 12.7 13.7 14.788" 2.5 3.7 4.8 5.8 6.9 8.0 9.1 10.1 10.9 12.3 13.4 14.4 15.592" 2.7 3.9 5.0 6.2 7.3 8.4 9.5 10.6 11.8 12.9 14.0 15.1 16.496" 2.9 4.1 5.2 6.4 7.6 8.8 10.1 11.1 12.3 13.5 14.6 15.7 16.9
WIDTH
HEIGHT
-
alexNoteSD201-H REPLACED WITH "PR.PDF" FROM ANDY'S PUBLIC.
-
alexNoteSD201-C REPLACED WITH SMA.PDF IN ANDY'S PUBLIC
SMA-S, SD201-K, REMOVED FROM CATALOG (PREVIOUSLY PAGES 124-125)
-
TERMSPRICINGSUBMITTALSPERFORATED FACE DIFFUSERSSQUARE CONE DIFFUSERSLOUVER FACE DIFFUSERSPLENUM SLOT DIFFUSERSLINEAR SLOT DIFFUSERSLINEAR BAR GRILLESALUMINUM SUPPLY GRILLES & REGISTERSALUMINUM RETURN GRILLES & REGISTERSDOOR GRILLESCONTROL DAMPERSWALL LOUVERSFIRE PRODUCTSSPECIAL PRODUCTS