Green Innovation for the Next GenerationGreen 160mm 150mm 100mm 150mm 10 x 8cm FOV is ideal for dual...
8
Green Innovation for the Next Generation Value added Technologies
Transcript of Green Innovation for the Next GenerationGreen 160mm 150mm 100mm 150mm 10 x 8cm FOV is ideal for dual...
Green Innovationfor the Next Generation
Value added Technologies
WIDE RANGE OF DIAGNOSIS WITH MULTI FOV SELECTION
With its expanded FOV sizes, the PaX-i 3D Green offers much higher diagnostic value for professionals.
PROFESSIONALDIAGNOSTIC VALUEWITH 3D IMAGES
PaX-i3D Green produces superb diagnostic images, whichwill be a source of pride for any dental practice, and improvingthe health and safety of your patients at the same time.
Experience great image quality thru VATECH’s 10-year accumulated know-how and advanced technology.
Great Clinical Care with GREEN INNOVATION
5.9 sec
Just 5.9 sec is enough!
Betterpatient care
Superiorimage quality
More efficient work flow
12
3
Green
160mm
150mm
100m
m
150m
m
10 x 8cm FOV is ideal for dual arch scans of the entire dentition, including third molars, implants and surgical guides.
16x10cm FOV provides the optimal information for diagnosis of the entire dental arch, including the TMJ. In addition, implant planning and facial surgery treatment planning is possible.
15X15 images from PaX-i3D Green enable you to do a comprehensive diagnosis including oral and maxillofacial surgery. The perfect FOV size will be helpful for complex orthognathic, implant, and orthodontic surgery.
FOV 10X8
FOV 16X10
FOV 15X15
21 X 23cm 3.9 (8.3 X 9.1”)
27 X 23cm (10.6 X 9.1”)
PROFESSIONALDIAGNOSTIC VALUE WITH CEPHALOMETRIC IMAGES
Superior image quality is delivered using highly advanced a-Si TFT Sensors.Three different ceph image sizes reduce unnecessary X-ray dosage and scans the ideal area of cranial anatomy for your diagnosis and treatment planning.
20 X 20cm (8X8 ” ) 23 X 25cm (9 X 10” ) 30 X 25cm (12 X10” )
With One Shot Ceph, you can acquirehigh quality images with low X-ray dosage.Plus, short scan time markedly reduces motion artifacts.
Ceph FOV Size
PaX-i3D Green
PaX-i3D Green OPPaX-i3D Green SC
36.2 ”18”
78.1 ”
47.2 ”
52.2”
34.6”
3.5 ” 36.2 ”18”
78.1 ”
47.2 ”52
.2”
34.6
”
3.5 ”
47.2 ”
52.2”
18”
39.8 ”
SC
OP
(PaX-i3D Green : PHT-60CFO)
41.7 ”41.7 ”
41.7 ”
10
Pano + CBCT + Ceph
X8 : Mul t i [ 5 X5 / 8 X8 / 10 X8]16X10 : Mul t i [5X5 / 8X8 / 12X9 / 16X10]15X15 : Mul t i [5X5 / 8X5 / 8X8 / 12X9 / 15X15]
Pano : 10.1sec (Normal )Scan Ceph : 3.9sec (Ful l LAT-16.9sec)One Shot Ceph : 0.9-1.2secCBCT : 5.9sec, 9 sec (FOV 15x15 model )
5X5 : 0.12mm / 0.2mm 8X8, 10X8, 12X9, 16X10 : 0.2mm / 0.3mm15X15 : 0.25mm / 0.3mm
27.6”
64.6”
92.1”
27.6”
64.6”
92.1”
27.6”
64.6”
92.1”
*An additional 7.5 inches of space is required behind the unit for wall mount bracket installation (mandatory unless there is a base mount installation).
PaX-i3D Green PaX-i3D Green SC PaX-i3D Green OP
14 bit
Standing / Wheel-Chair Accessible
50-100kVp (1kV step) / 4-16 mA (0.1 mA step)
8.3”X9.1” [LAT,PA,SMV,Waters View,Carpus] 10.6”X9.1” [Full LAT]
8”X8” [LAT, PA]9”X10” [LAT, PA]12”X10” [LAT, PA, SMV, Waters View, Carpus
2200 Fletcher Ave., Suite 705A, Fort Lee, NJ [email protected] http://www.vatechamerica.com 07/2015
Value added Technologies
Value added Technologies
