Grafi - Microsoftdkcblob.blob.core.windows.net/prodotti/... · 2019. 10. 23. · 270 General...
Transcript of Grafi - Microsoftdkcblob.blob.core.windows.net/prodotti/... · 2019. 10. 23. · 270 General...
268 General Catalogue Conchiglia Line 2018
Enclosures with one compartment - Depth 375mmMaterialsMoulded in SMC (fiberglass) - grey RAL 7040 color. Internal hinges in polyaryla-mide-based fiberglass-reinforced thermoplastic resin (IXEF). External metal parts made of stainless steel or tropicalized steel painted grey and electrically insulated from the inside.CharacteristicsIn compliance with CEI EN 62208 rule. Rated insulation voltage Ui 690V. Hinged door complete with cremone-type bolt operated by a retracting handle with Y21 individually-keyed safety lock. Air intakes below and under the roof for natural internal ventilation. Mounting plate equipped with brass inserts buried in the moulding so as to allow equipment to be applied directly or through the mounting plate itself.Protection degreeIP 44 in compliance with CEI 60529, IK 10 according to CEI EN 62262.For independent installation floor anchor frame (supplied only for executions CVL / T - CVL / T-WL). WLP executions - without lock and prepared for application locks series SCS86/.. - SCM86/.. to be ordered separately.The effective dimensions shown in the table indicate the maximum space available for the equipment in compliance with the features specified by standard CEI EN 62208 (effective protected space).*Max load kg applicable on bottom wall.
CVL/T
External dimensions, mm Internal dimensions, mm Max load Kg.
Applicable on bottom
wall
Type of installation Model CodeHeight Base Depth Height Base Depth
1394 860 450 1365 780 375 100 For floor installation with frame CVL/T 073200032
1394 860 450 1365 780 375 100For floor installation with
frame. Without lock CVL/T-WL 073200230
External dimensions, mm Internal dimensions, mm Enclosures not available Conversion Grafi enclosures
Height Base Depth Height Base Depth Model Code Model Code
401 860 450 365 780 375 CVL/S1/C 073201006GH9-2/2/S-4 078912904
G-EA/SFP 097770028
753 860 450 715 780 375 CVL/S2/C 073202004GH9-4/4/S-4 078914900
G-EA/SFP 097770028
753 860 450 715 780 375 CVL/S2/T 073202038 GH9-4/4/T-4 078914108
1394 860 450 1365 780 375 CVL/T-ACV* 073203002
GH9-8/8/T-4 078918109
G-8/MT 095770087
G/SM 095770905
G9/8/TPM 095779740
* N°1 compartment for housing panel modular equipment max 204 modules placed in 6 rows. Consists of upright + frame and profiled metal DIN rail
Conversion enclosures not available - new Grafi series
Width 860 mm
269General Catalogue Conchiglia Line 2018
Width 860 mm
Enclosures with meter compartmentMaterialsMoulded in SMC (fiberglass) - grey RAL 7040 color. Internal hinges in polyaryla-mide-based fiber-glass-reinforced thermoplastic resin (IXEF). External metal parts made of stainless steel or tropicali-zed steel painted grey and electrically insulated from the inside.CharacteristicsHinged door complete with cremone-type bolt operated by a retracting handle with Y21 individually-keyed safety lock. Air intakes below and under the roof for natural internal ventilation. For floor installation with masonry FrameWith built-in contact box on the right-hand side - independent access with a diversified lock (stan-dard triangular lockable version). Suitable for direct mounting of electronic meters:- max n ° 1 integrated single-phase measuring group, GMI-GMY type.- max n ° 1 single phase for powers up to 10Kw GEM-GISM type. Fixing with n. 1 base T5 A2 (serial number 286103).- max n ° 1 three-phase for powers up to 16.5Kw type GET2A, up to 30Kw type GIST. Fixing with n ° 1 base T5 A4 (Serial number 286142).
Degree of protectionIP 44 according to CEI EN 60529, IK 10 according to CEI EN 62262.
CVL/GMI/T
External dimensionscomplessive, mm
Internal enclosure dimensions, mm
Internal dimensions of meter comp. Model Code
Height Base Depth Height Base Depth Height Base Depth
1394 860 450 1365 780 375 375 182 182 CVL/GMI/T 073200131
Enclosure for measuring groups of over 30 KW
CVL3/GM-WL
External dimensions, mm Internal dimensions, mmType of installation Model Code
Height Base Depth Height Base Depth
1394 860 450 1365 780 375 For floor installation with frame CVL3/GM-WL 073230138
MaterialsMoulded in SMC (fiberglass) - grey RAL 7040 color. Internal hinges in polyaryla-mide-based fiberglass-reinforced thermoplastic resin (IXEF). External metal parts made of stainless steel or tropicalized steel painted grey and electrically insulated from the inside.CharacteristicsHinged door complete with cremone-type bolt operated by a retracting handle with Y21 individually-keyed safety lock. Air intakes below and under the roof for natural internal ventilation.Protection degreeIP 44 in compliance with CEI EN 60529, IK 10 according to CEI EN 62262.Complete with table fixing brackets for threephase power supplies and semi-direct insertion metering (TTA) - for users of over 30 kW and up to 150 kW (active and reactive power metering). Complete with partition closed lower.WL versions = without lock. Prearrangement locks application series SCS 86/... - SCM 86/....to order separately
270 General Catalogue Conchiglia Line 2018
Width 860 mm
MaterialsMoulded in SMC (fiberglass) - grey RAL 7040 color. Internal hinges in polyaryla-mide-based fiberglass-reinforced thermoplastic resin (IXEF). External metal parts made of stainless steel or tropicalized steel painted grey and electrically insulated from the inside.CharacteristicsIn compliance with CEI EN 62208 rule. Rated insulation voltage Ui 690V. Hinged door complete with cremone-type bolt operated by a retracting handle with Y21 individually-keyed safety lock. Air intakes below and under the roof for natural internal ventilation. Mounting plate equipped with brass inserts buried in the moulding so as to allow equipment to be applied directly or through the mounting plate itself.Protection degree IP 44 in compliance with CEI 60529, IK 10 according to CEI EN 62262.For self-standing floor installation with anchor frame (include in the supply).Enclosure and plinth (H=365mm) to be ordered separately.
CVL/T + ZVL(supplied separately)
Enclosures with one compartment with plinth
External dimensions, mm Internal dimensions, mm Enclosure ordering codes Plinth ordering codes
Height Base Depth Height Base Depth Model Code Model Code
1761 860 450 1365 780 375 CVL/T 073200032 ZVL 073290009
1761 860 450 1365 780 375 CVL/GMI/T 073200131 ZVL 073290009
External dimensions, mm Internal dimensions, mm Enclosure not available Conversion Grafi enclosure
Height Base Depth Height Base Depth Model Code Model Code
1394 860 450 1365 780 375 CVL3/T 073230039 GH9-8/25/ZT-4 078918190
1744 860 450 1715 780 375 CVU/T 073220030 GH9-9/28/ZT-4 078919198
Conversion cabinet not available - new Grafi series
271General Catalogue Conchiglia Line 2018
Width 860 mm
Enclosure with two compartments of same size - Depth 375mmMaterialsMoulded in SMC (fiberglass) grey RAL 7040 color. Internal hinges in polyaryla-mide-based fiberglass-reinforced thermoplastic resin (IXEF). External metal parts made of stainless steel or tropicalized steel painted grey and electrically insulated from the inside.CharacteristicsIn compliance with CEI EN 62208 rule. Rated insulation voltage Ui 690V. Hinged door complete with cremone-type bolt operated by a retracting handle with Y21 individually-keyed safety lock on both compartments. Partition complete with fairleads. Single structure model. Air intakes below and under the roof for natural internal ventilation. For self-standing floor installation with anchor frame (inclu-ded). Mounting plate equipped with brass inserts buried in the moulding so as to allow equipment to be applied directly or through the mounting plate itself.Protection degreeIP 44 in compliance with CEI EN 60529, IK 10 according to CEI EN 62262.WLP executions - without lock and prepared for application locks series SCS86/.. - SCM86/.. to be ordered separately.The effective dimensions shown in the table indicate the maximum space available for the equipment in compliance with the features specified by standard CEI EN 62208 (effective protected space).
CVL2/T-WL
External dimensions, mm Internal dimensions, mm lower compartment
Internal dimensions,mmhigher compartment
Max load Kg.
Applicable on bottom wall
Model Code
Height Base Depth Height Base Depth Height Base Depth
1394 860 450 660 780 375 660 780 375 100 CVL2/T-WL 073240137
Conversion enclosures not available - new Grafi seriesExternal dimensions,
mmInternal dimensions, mm
lower compartmentInternal dimensions,mm
higher compartment Enclosure not available Conversion Grafi enclosure
Height Base Depth Height Base Depth Height Base Depth Model Code Model Code
1394 860 450 660 780 375 660 780 375 CVL2/T 073240038 GH9-8/44/T-4 078918208
272 General Catalogue Conchiglia Line 2018
Width 860 mm
MaterialsMoulded in SMC (fiberglass) - grey RAL 7040 color. Internal hinges in polyaryla-mide-based fiberglass-reinforced thermoplastic resin (IXEF). External metal parts made of stainless steel or tropicalized steel painted grey and electrically insulated from the inside.CharacteristicsIn compliance with CEI EN 62208 rule. Rated insulation voltage Ui 690V. Hinged door complete with cremone-type bolt operated by a retracting handle to ensure that the door adheres perfectly. CVL/SST manufacture with a single cipher safety key code 21 cipher for the bottom compartment, code 12 cipher for the top compartment. Partition complete with fairleads. Air intakes below and under the roof for natural internal ventilation. For self-standing floor installation with anchor frame (inclu-ded). Mounting plate equipped with brass inserts buried in the moulding so as to allow equipment to be applied directly or through the mounting plate itself. Refer to each single cubicle data sheet when choosing the accessories.Protection degree IP 44 in compliance with CEI EN 60529, IK 10 according to CEI EN 62262The effective dimensions shown in the Table indicate the maximum space available for the equipment in compliance with the features specified by standard CEI EN 62208 (effective protected space).
CVL/SST
Enclosures with two compartments - higher at bottom
External dimensions, mm
Internal dimensions,mmlower compartment
Internal dimensions, mmhigher compartment
Max load Kg. Applicable on bottom wall
Compartment composition Model Code
Height Base Depth Height Base Depth Height Base Depth Top. Bot.
2091 860 450 1365 780 375 694 780 375 100 SSVL CVL CVL/SST 073200099
External dimensions, mm Internal dimensions,mmlower compartment
Internal dimensions, mmhigher compartment
Max load Kg. Applicable on bottom wall Model Code
Height Base Depth Height Base Depth Height Base Depth Topcomp.
Bottomcomp.
1763 860 450 1365 780 375 366 780 375 50 100 CVL/ST 073200081
CVL2/T-WL + ZVL
Enclosures with two compartments with plith
External dimensions, mm
Internal dimension, mm lower compartment
Internal dimension, mm higher compartment Enclosure not available Conversion Grafi enclosure
Height Base Depth Height Base Depth Height Base Depth Model Code Model Code
1744 860 450 660 780 375 660 780 375 CVU2/T 073260036 GH9-9/244/ZT-4 078919297
External dimensions, mm Internal dimensions,mmlower compartment
Internal dimensions, mmhigher compartment
Enclosure not available
Conversion Grafi enclosure
Height Base Depth Height Base Depth Height Base Depth Model Code Model Code
1394 860 450 1000 780 375 370 780 375 CVL32/ST 073200073 GH9-8/52/T-4 078918216
External dimensions, mm Internal dimensions, mm Enclosure ordering codes Plinth ordering codes
Height Base Depth Height Base Depth Model Code Model Code
1761 860 450 660 780 375* CVL2/T-WL 073240137 ZVL 073290009
*2 compartments cubicle, the dimensions rif. a single compartment.
Conversion enclosures not available - new Grafi series
Conversion enclosure not available - new Grafi series
MaterialsMoulded in SMC (fiberglass) - grey RAL 7040 color. Internal hinges in polyaryla-mide-based fiber-glass-reinforced thermoplastic resin (IXEF). External metal parts made of stainless steel or tropicali-zed steel painted grey and electrically insulated from the inside.CharacteristicsIn compliance with CEI EN 62208 rule. Rated insulation voltage Ui 690V. Hinged door complete with cremone-type bolt operated by a retracting handle with Y21 individually-keyed safety lock on both compartments (code 21). Partition complete with fairleads. For self-standing floor installation with anchor frame. Air intakes below and under the roof for natural internal ventilation. Mounting pla-te equipped with brass inserts buried in the moulding so as to allow equipment to be applied directly or through the mounting plate itself.Protection degreeIP 44 in compliance with CEI EN 60529; IK 10 according to CEI EN 62262.WL versions = without lock. Provision for applications SCS86/..- SCM86/.. series locks to be orde-red separately.The effective dimensions shown in the table indicate the maximum space available for the equipment in compliance with the features specified by standard CEI EN 62208 (effective protected space).
273General Catalogue Conchiglia Line 2018
Accessories and spare parts - Enclosure width 860 mm
Mounting plates
Compatible enclosures DimensionsIn sheet steel th. 2 mm In bakelite th. 5 mm In PVC th. 5 mm Wood (for marine use)
sp. 15 mm
Model Code Model Code Model Code Model Code
CVL/..., CVL3/..., CVL/ST...(bottom comp.)
720x1248 (in 2 pz) PCV/L 095703203 PB/CVL 095683207 PP/CVL 095693206 PL/CVL 095673208
CVL/32 (bottom comp.) 720x900 (in 2 pz) PCV/L32 095703237 PB/CVL32 095683231 PP/CVL32 095693230 - -
CVL/S2/..., SSVL, SSVBL - CVL2/..., CVU2/...
(bottom comp.) - CVL2/..., CVU2/... (top comp.)
720x623 PSSV/L 095703294 PB/SSVL 095683298 PP/SSVL 095693297 - -
CVL/S1/..., SVL, SVBL - CVL/ST... (top comp.) -
CVL32 (top comp.)720x324 PSV/L 095704201 PB/SVL 095684205 PP/SVL 095694204 - -
CVL – CVU (counter box) 655x430 - - - - PP/CVL/PC 095693214 - -
PB/CVL
Closing bottom platesFor CV.../T versions (floor installation).Complete with conical fairleads in thermoplastic material.SI/CV... in bakelite.
Compatible enclosures Model Code
CVL/S2/T, CVL/T, CVL32/ST, CVL/ST, CVL2/T, CVL/GMI/T, CVU/T, SI/CVLU 095768008
CVBL/T, CVBL2/T SI/CVBL 095768107
SI/CVLU
Floor anchor frames (for/T versions)
Screws in AISI 304 stainless steel to guarantee fail-safe operation to wall into the floor.Made with steel with double protection treatment: galvanic treatment covered with a layer of epoxy paint.
TA/CVL
Compatible enclosures Model Code
CVL/S2-CVL-CVL2-CVL3-CVL/GMI-CVU-CVU2-CVU/GMI TA/CVL 095738001
CVBL-CVBL2 TA/CVBL 095738100
Wall fixing supportMaterialsMade of steel with double protection treatment: galvanic treatment covered with a layer of epoxy paint.Screw in AISI 304 stainless steel.
SAP/CVL
External dimensions, mmMax load Kg Compatible enclosures Model Code
Height Base Depth
500 880 435 120 CVL - CVL3 - CVU e derivati SAP/CVL 095730529
288 General Catalogue Conchiglia Line 2018
SCR86/X/630
Locks - series SC..86/..Materials: Components moulded in fiberglass reinforced polyamide resin.Brass cylinder/rotor.Characteristics: 3-point latch operation. Each lock has its own standard key.
Locks series SCS-SCM can only be used with CV enclosure running without lock (WL - WLP).
In the standard version, all enclosures and top units are complete with lock with retracta-ble lever useable with key encryption Y21 for the cabinets with one compartment - lower Y21, Y12 upper enclosures with 2 compartments.On enclosures in standard execution can not be used locks series SCS-SCM.
Description Model Code
With cylinder yale cfr. Y12 BPC/Y12 095714127
With cylinder yale cfr. Y21 BPC/Y21 095714218
With spiked key cylinder cfr. 630 BPC/630 095714304
BPC/Y12
Keyrings tin
Made of thermoplastic material for applications on 35mm diameter hole
Accessories and spare parts for enclosures
SCS86/L SCS86/Y21 SCS86/TR9
Description / Applicazions Type Type of key Model Code
Operated by safety key cod.21 A CS/21 SCS86/Y21 095718219
Operated by safety key cod.12 B CS/12 SCS86/Y12 095718128
Operated by safety key cod 21 with vandal proof handle(free rotating when closed) C CS/21 SCM86/Y21 095719217
Operated by safety key cod 12 with vandal proof handle(free rotating when closed) D CS/12 SCM86/Y12 095719126
Operated by safety pin key cod.630 prearrangement for padlock E CSP/630 SCR86/X/630 095717617
Operated by rotating knob without key F - SCS86/P 095718029
Operated by levers, prearrangement for padlock G - SCS86/L 095718011
Operated by triangle key H CHP/TR9 SCS86/TR9 095718904
Operated by triangle key and prearrangement for padlock I CHP/TR9 SCS86/TR9/L 095718912
Double locking device operated by safety key cod 21prearrangement for padlock L CS/21 SCS86/Y21/L 095718227
Double locking device operated by safety key cod 12prearrangement for padlock M CS/12 SCS86/Y12/L 095718136
Prearrangement for customized pin key cylinder lock N - SCR86/PC 095717518
289General Catalogue Conchiglia Line 2018
CHP/TR9
Keys
CSP/630
Description Model Code
Thermotpastic material for screws triangular CHP/TR9 091503292
nickel plated brass - cfr 12 CS/12 091505123
nickel plated brass - cfr 21 CS/21 091505214
brass safety locks stiked cfr 630 CSP/630 091505305
Locks SSCM105/Y... Series locksMaterials: Body and handle in polyamide resin. Brass turning spindle: Galvanized steel latch.
Characteristics: Handle pre-engineered for cylinder with DIN 18252 profile.Each lock comes complete with its own set of keys.
Description / Applicazions Type Type of key Type of cabinets Model Code
Operated by retracting handle accessible withY21 cipher safety key O CS/21
CVHP - CVHP2 CVHP/SST -
CVHP/ST inf. - CVL - CVL2
SSCM105/Y21 095715215
Operated by retracting handle accessible withY12 cipher safety key P CS/12 CVHP/SST -
CVHP/ST sup. SSCM105/Y12 095715124
Operated by retracting handle accessible withY21 cipher safety key Q CS/21
CVT - CVN-CV4M-CVHT
- CVHN - BVT - BVN - BVHT
- BVHN - BV4M inf.
SSCM070/Y21 095717211
Operated by retracting handle accessible withY12 cipher safety key R CS/12
BVT sup. - BVN sup.
- BVHT sup. - BVHN sup. -
BV4M sup.
SSCM070/Y12 095717120
SSCM105/Y21
Spares for SSCM105/Y21 series locks
Description / Applicazioni Type Type of lock Model Code
Y21 cipher DIN 18252 cylinder O SSCM105/Y21 CMY/21 095713210
Y12 cipher DIN 18252 cylinder P SSCM105/Y12 CMY/12 095713129
CMY/21
Accessories and spare parts for enclosures
290 General Catalogue Conchiglia Line 2018
Summary table enclosures locks application
Type of cubicle Standard locks Optional lock WL-WLP versions
CVA/... A A÷N
CVT/... Q A÷N
CVHT/... Q A÷N
CVN/... Q A÷N
CVHN/... Q A÷N
CV4M/... Q A÷N
CVHP/..., CVHY O C-D-F-G-H-I-L-M
CVL/... O C-D-F-G-H-I-L-M
CVF/... O C-D-F-G-H-I-L-M
SVT Q A÷N
SSVT Q A÷N
SVHT Q A÷N
SSVHT Q A÷N
SVN Q A÷N
SVHN Q A÷N
SV4M Q A÷N
SVHP O C-D-F-G-H-I-L-M
SMVHP O C-D-F-G-H-I-L-M
SSVHP O C-D-F-G-H-I-L-M
SVL O C-D-F-G-H-I-L-M
SSVL O C-D-F-G-H-I-L-M
Note: The locks for WL and WLP enclosures are supplied separately
Enclosures with one compartment
Accessories and spare parts for enclosures
291General Catalogue Conchiglia Line 2018
Summary table enclosures locks application
Type of enclosureStandard locks
Optional lock WL-WLP versionsBottom front compartment Top rear compartment
BVT/... O P A÷N
BVN/... O P A÷N
BVNT/... O P A÷N
BVTN/... O P A÷N
BVHT/... O P A÷N
BVHN/... O P A÷N
BVHNT/... O P A÷N
BVHTN/... O P A÷N
BV4M/... O P A÷N
CVT/ST O O A÷N
CVN/ST O O A÷N
CVHT/ST O O A÷N
CVHN/ST O O A÷N
CVHP/ST O O C-D-F-G-H-I-L-M
CVHP/SST O P C-D-F-G-H-I-L-M
CVHP2/... O O C-D-F-G-H-I-L-M
CVL/ST O O C-D-F-G-H-I-L-M
CVL/SST O P C-D-F-G-H-I-L-M
CVL2/... O O C-D-F-G-H-I-L-M
CM/... O - C-D-F-G-H-I-L-M
Note: The locks for WL and WLP enclosures are supplied separately
Enclosures with several compartments
Accessories and spare parts for enclosures
292 General Catalogue Conchiglia Line 2018
Air ventsMaterialsExternal cover in SMC. Grey RAL 7030 color.Internal protection grid made of polyamide resin (PA6 V2) grey RAL 7040 color.CharacteristicsVentilation area:wall thickness mm 2.5 min: 2200 mmqwall thickness mm5 min: 2240 mmq.Protection degreeIP44 in compliance with CEI EN 60529, IK 10 according to CEI EN 62262.Note: Executions applications as scheme B are carry out only on enclosures depth 375 mm.Applicable to all the series, with the exception of CVA
BAF/160
Bore diameter Outer diameter Versions Model Code
140 160 loose BAF/160 095431169
140 160 applied EA/BAF/160 097431167
Air vents for forced ventilationAxial fan for forced ventilation vents of BAF/160.Voltage rating: 220/240 Vac.Frequency: 50/60 Hz. Current: 0.06 APower rating: 13 WAir flow:13.6 l/sThe data are referred to the fan not applied.
EA/BAF/160
Dimensions Model Code
92x92x25 VENTIL/BAF/160 095432001
EA/BAF/160
Accessories and spare parts for enclosures
293General Catalogue Conchiglia Line 2018
Accessories and spare parts for enclosures
Model Code
PSK/A4 095750204
G-PSK/A4-A 095777389
Inspection windowMaterials: In transparent polycarbonate complete with polyvinyl chloride seal.Characteristics: To conduct inspections and take readings with the cover closed (always state the position).Protection degree IP 44 in compliance with CEI EN 60529, IK 10 according to CEI EN 62262.Can be applied to the entire series of CV-BV
Pocket/drawing holder
Outer diameter Reading diameter Model Versions Model Code
164 117 CPHX-CPMI-CPTI-CPYK oose OC/120 095750915
164 117 CPMI-CPTI-CPYK applied EA/OC/120 097750913
OC/120
Materials:PSK/A4: Moulded in PVC (polyvinyl chloride)G-PSK/A4-A: Plastic. RAL 7035 colorCharacteristics: for housing drawings and documents.PSK/A4: applied inside the door on CVT - CVHT - CVN - CVHN - CVL - CVU size enclosures and sub-versions.G-PSK/A4-A: Fastening with double-sided adhesive.
PSK/A4
G-PSK/A4-A
294 General Catalogue Conchiglia Line 2018
Dimensions Max capacity in Kg Model Code
242x48 25 GEC/CVL 095752002
242x68 60 GC/CVL 095752010
242x168 60 GL/CVL 095752028
Lifting eyeboltsMaterials: In galvanized steel section metal with M8 thread.Characteristics: Max carrying capacity 120 Kg.To transport and install enclosures - can be applied to the entire series of CV - BV - CM.
Shelf runners
Versions Model Code
Loose GS/CVL 095750501
Applied EA/GS/CVL 097750509
Materials: Made of die-cast UNI EN 1706 AC - 46100 DF aluminium alloy.Characteristics: Can be applied to HP - L size CV series cubicles and sub-versions or to any other pre-engineered flat surface.Max carrying capacity of each runner (calculated with safety coefficient 3).
GL/CVL
GS/CVL
Shelves for equipment
RPL/CVL
External dimensions, mmMax capacity in Kg Compatible enclosures Model Code
Height Base Depth
360 575 12 20 CVHP - CVL and derivatives RPA/CVL 095751202
360 675 12 20 CVL and derivatives RPL/CVL 095751251
265 503 12 20 CVT - CVN and derivatives RPA/CVT 095751509
373 503 12 20 CVHT - CVHN and derivatives RPA/CVHT 095751517
Materials: Moulded in SMC (fiberglass)Characteristics: types RPA/CVL - RPL/CVL can be applied to pre-engineered enclosures with pairs of runners; type RPA/CVT - RPA/CVHT can be positioned on the base or middle of pre-engineered enclosures.
RPA/CVT
Accessories and spare parts for enclosures
295General Catalogue Conchiglia Line 2018
Accessories and spare parts for enclosures
Table application guides and shelves
Enclosuresmodels
Max number of shelves Number of runners per shelf Max number of runner(points)
RPA/CVL RPL/CVL RPA/CVT RPA/CVHT GEC/CVL GC/CVL GL/CVL right left
CVT - - 1 - - - - - -
CVN - - 1 - - - - - -
CVHT - - - 1 - - - - -
CVHN - - - 2 - - - - -
SVT - - 1 - - - - - -
CVHP 5 - - - 2 - - 5 5
CVHY 5 - - - 2 - - 5 5
CVL 5 - - - - 1 1 5 5
CVL - 5 - - - 2 - 5 5
CVF - - - - - - - 5 5
Enclosures composition scheme
1
2
8
5
9
10
11
12
14
13
4
6
3
7
TettuccioTelaio aerazione sottotettoParete di fondoFianco destroFianco sinistroTraversa superioreTraversa inferioreAssieme cerniere fiancoAssieme cerniere portaPortaSerraturaPaletti chiusura portaSetto inferiore di chiusura* (a rich.)Telaio di ancoraggio
123456789
1011121314
Legenda
* Il setto inferiore è fornito di serie chiuso nelle escuzioni aparete (…/C) e a palo. E’ fornibile a richiesta completo dipassacavi nelle esecuzioni per posa a pavimento (…/T).Per una corretta scelta vedere la guida accessori e ricam bal piede di ogni singola pagina alla voce setti di chiusurainferiore.
1
2
8
5
9
10
11
12
14
13
4
6
3
7
TettuccioTelaio aerazione sottotettoParete di fondoFianco destroFianco sinistroTraversa superioreTraversa inferioreAssieme cerniere fiancoAssieme cerniere portaPortaSerraturaPaletti chiusura portaSetto inferiore di chiusura* (a rich.)Telaio di ancoraggio
123456789
1011121314
Legenda
* Il setto inferiore è fornito di serie chiuso nelle escuzioni aparete (…/C) e a palo. E’ fornibile a richiesta completo dipassacavi nelle esecuzioni per posa a pavimento (…/T).Per una corretta scelta vedere la guida accessori e ricam bal piede di ogni singola pagina alla voce setti di chiusurainferiore.
Legend:
1. Roof
2. Under roof air frame
3. Back
4. Right side
5. Left side
6. Upper traverse
7. Lower traverse
8. Pivot side
9. Pivot door
10. Door
11. Door lock
12. Locking door poles
13. Bottom plate to close* (on request)
14. Anchor frame
* The lower partition is supplied as standard in the wall and pole versions. It can be supplied, on request, complete with fairleads in the execution for floor installation.
296 General Catalogue Conchiglia Line 2018
Enclosures hingesCharacteristicsPack with pairs of hinges.
Type of enclosures Model Code
For all enclosures CV (T-HT-N-HN-4N-HP-BP-L-BL-U-F-R) K-CR/CV 095741005
CVHP/RZT/E-CV4M/E K-CR/CVE 095741013
Accessories and spare parts for enclosures
Doors complete with polesCharacteristicsLock and hinge not included.
Type of enclosures Model Code
CVT-CVHT-SSVT-SSVHT-BVT K-SPT/T 095741500
CVT-CVHT-SSVT-SSVHT-BVT Version without lock (WL) K-SPT/T-WL 095741526
CVN-CVHN-SSVN-SSVHN-BVN K-SPT/N 095741542
CVN-CVHN-SSVN-SSVHN-BVN Version without lock (WL) K-SPT/N-WL 095741567
CV4N-BV4M K-SPT/4M 095741583
CV4N-BV4M Version without lock (WL) K-SPT/4M-WL 095741609
SVT-SVHT K-SPT/ST 095741625
SVT-SVHT Version without lock (WL) K-SPT/ST-WL 095741641
CVL-CVU K-SPT/LU 095741666
CVL-CVBL-CVU Version without lock (WL) K-SPT/LU-VL 095741682
CVHP-CVBP K-SPT/HP 095741716
CVHP-CVBP Version without lock (WL) K-SPT/HP-WL 095741724
CV4M/E K-SPT/4ME 095741617
297General Catalogue Conchiglia Line 2018
Enclosures roofs
Type of enclosures Model Code
CVT-CVN-BVT-BVM K-T/TN 095742003
CVHT-CVHN-BVHT-BVHM K-T/HTN 095742029
CV4M-BV4M K-T/4M 095742045
CVL-CVU K-T/LU 095742060
CVBL K-T/BL 095742086
CVHP K-T/HP 095742102
CVBP K-T/BP 095742128
Accessories and spare parts for enclosures