GPS/GNSS RTK Total Station GIS & · Web viewHI-TARGET controller with WiFi, Bluetooth, and...
Transcript of GPS/GNSS RTK Total Station GIS & · Web viewHI-TARGET controller with WiFi, Bluetooth, and...
PRODUCTS
Hi-Target1. GPS/GNSS RTK2. Total Station 3. GIS & Mapping4. Theodolite
NEDO1. Laser and Accessories
STONEX1. Total Station2. GPS/ DGPS3. Auto Level/Digital Level4. Theodolite5. Laser Scanner6. Echo-Sounder7. ADL Radio Link
STS Corporation1. Laser Equipments2. Measuring Equipment/Checking Equipment3. Surveying Instruments
UAVER1. UAVs
Yutung 1. Floating Fender2. Rubber Balloon for Launching3. Dock Fender4. Dock and Ship Hardware
Lab Equipments1) Digital Storage Oscilloscope2) Collimator System3) EDM4) Cube Testing Machine5) Rebound Proseq Hammer6) Prismatic Compass7) Telescope Alidade8) Cube Mould 9) Slump Cone10) Surveyors Chains11) Ranging Rods12) Survey Umbrella
Hi-Target: Established in 1999, Hi-Target Survey Instruments Company Ltd engaging in GNSS high-tech technology industry, covering from GNSS technology development, to production as well as marketing and sales.
Products are:
GPS/GNSS RTK Total Station GIS & Mapping TheodoliteProduct details Product details Product details Product details
V60 GNSS RTK System HTS-220/R Total Station Q Star GIS Collector DT-02/DT-02L V30 GNSS RTK System ZTS-320/R Total Station Q Mini M
ZTS-120/R Total Station
1. GPS/GNSS RTK
V60 GNSS RTK SYSTEM
System Features Technical parameters
System Features:
HARDWARE
Physical
Dimensions (W x H): 18.20cm x 9.80cm (7.17 in x 3.86 in)Weight: 1.25kg (2.76lb) without internal battery Operating temperature: -45℃ to +65℃ (-49℉ to +149℉)Storage temperature: -55℃ to +85℃ (-67℉ to +185℉) Humidity: 100%, consideringWater/dustproof: IP67 dustproof, protected from temporary immersion to depth of 1m (3.28ft).Shock and Vibration: Designed to survive a 3m (9.84ft) natural fall onto concrete. Electrical
Power 6V to 28V DC external power inputPower consumption ≤3.5W Automatic Switching between internal power and external powerRechargeable, removable 7.4V, 5000mAh Lithium-Ion battery in internal battery compartment Internal battery life
Static 13 - 15 hoursRTK Rover (UHF/GPRS/3G) 10 - 12 hoursRTK Base 8 - 10 hours I/O interface
1 x Bluetooth1 x standard USB2.0 port1 x TNC UHF connector
2 x RS232 serial port2 x DC power input (8-pin & 5-pin) 1 x Micro SD card port
COMMUNICATION AND DATA STORAGE
3G Communication
Fully integrated, fully sealed internal 3G, compatible with GPRSNetwork RTK (via CORS) range 20-50km HI-TARGET internal UHF radio (standard)
Frequency: 450~470MHz with 116 channelsTransmitting Power: 1W, 2W, 5W adjustableTransmitting Speed: 9.6Kbps, 19.2KbpsWorking Range: 5km typical, 8~10km optimal Pacific Crest internal UHF radio
Frequency: 403~473 MHzTransmitting Power: 0.5W, 2W adjustableTransmitting Speed: Up to 19.2KbpsSupport most of radio communication protocolWorking Range: 3~5km typical, 8~10km optimal HI-TARGET External UHF radio (standard)
Frequency: 460 MHz with 116 channelsTransmitting Power: 5W, 10W, 20W, 30W adjustableTransmitting Speed: Up to 19.2KbpsWorking Range: 8~10km typical, 15~20km optimal Pacific Crest ADL Vantage Pro External UHF radio
Frequency: 390~430 MHz or 430~470 MHz Transmitting Power: 4W to 35W adjustableTransmitting Speed: Up to 19.2Kbps
Support most of radio communication protocolWorking Range: 8~10km typical, 15~20km optimal Support other external communication device
For example, external GSM modem. Data storage
1GB Internal storage+ 8GB Internal Micro SD Card memory (Support up to 32GB extension)
Record GNS and Rinex format simultaneously Data formats
(1Hz positioning output, up to 50 Hz - depends on installed option)CMR: sCMRx, CMR, CMR+ input and outputRTCM: RTCM 2.1, 2.2, 2.3, 3.0, 3.1, 3.2 input and outputNavigation outputs ASCII: NMEA-0183 GSV, AVR, RMC, HDT, VGK, VHD, ROT, GGK, GGA, GSA, ZDA, VTG, GST, PJT, PJK, BPQ, GLL, GRS, GBSNavigation outputs Binary: GSOF1 Pulse Per Second Output
Technical Parameters:
PERFORMANCE SPECIFICATIONS
MEASUREMENTS
• 220 Channels• Advanced Pacific Crest Maxwell 6 Custom Survey GNSS Technology• High precision multiple correlator for GNSS pseudo range measurements
• Unfiltered, unsmoothed pseudo range measurements data for low noise, low multipath error, low time domain correlation and high dynamic response• Very low noise GNSS carrier phase measurements with <1 mm precision in a 1 Hz bandwidth• Signal-to-Noise ratios reported in dB-Hz• Proven Pacific Crest low elevation tracking technologySatellite signals tracked simultaneously
GPS: Simultaneous L1C/A, L2C, L2E, L5GLONASS: Simultaneous L1C/A, L1P, L2C/A (GLONASS M only), L2P SBAS: Simultaneous L1 C/A, L5Galileo: Simultaneous L1 BOC, E5A, E5B, E5AltBOCBDS/Compass: B1, B2QZSS: L1 C/A, L1 SAIF, L2C, L5 POSITIONING PERFORMANCE
Static and Fast Static GNSS surveying
Horizontal: 2.5mm+0.5ppm RMSVertical: 5mm+0.5ppm RMS Post Processing Kinematic
(PPK / Stop & Go) GNSS surveying
Horizontal: 1cm+1ppm RMSVertical: 2.5cm+1ppm RMSInitialization time: typically 10 minutes for base while 5 minutes for roverInitialization reliability: typically > 99.9% Real time Kinematic (RTK) surveying
Horizontal: 8mm+1ppm RMSVertical: 15mm+1ppm RMS
Initialization time: typically < 8 secondsInitialization reliability: typically > 99.9% Code Differential GNSS positioning
Horizontal: 25cm+1ppm RMSVertical: 50cm+1ppm RMSSBAS: 0.50m Horizontal, 0.85m Vertical
V30 GNSS RTK SYSTEMS
System Features:
Fully Automated Operation
The V30 is equipped with a smart speaker, which guides the user during operation. All its functionalities
are designed to make survey jobs to be done conveniently, such as auto base setup by one button, the
rover can get fix solution once it is turned on. No need to spend time setting the parameters for every
single operation.
Multi Constellation Tracking
220 channels. The V30 is fully compatible with GNSS constellations to track GLONASS, GALILEO, BDS,
SBAS as well as GPS.
System Features Technical parameters
High Power Transceiver UHF Radio
The transceiver UHF radio enables the V30’s working mode to be switchable between base and rover in
the same receiver.In the V30 package, 2 watts HI-TARGET internal UHF radio and 1 watt Pacific
Crest TrimTalk© internal UHF radio are optional for flexible use. 2 watts transceiver UHF radio is an
excellent choice for UHF RTK operation. On the other hand, 1 watt transceiver UHF radio is to be used to
have the V30 work with other brand’s receiverhaving TrimTalk© compatible radios.
Seamlessly Operation in CORS System
With internal GPRS or 3G modem, the V30 works perfectly with corrections from CORS networks in any
version of CMR, RTCM without needing to interpret the message but reading seamlessly.
Long-life Battery
Powered by 4400mAh Li-Ion battery.
Static working time 13 - 15 hours
RTK Rover(UHF/GPRS/3G) working time 10 - 12 hours
RTK Base working time 8 - 10 hours
Rugged Design, IP67
The special latching technology on flexible flat cables ensures trouble-free operation under impact or
vibration. The V30 withstands 3 meters natural fall onto concrete.
Field Controller and Software
There are optional field controllers and software in the V30 package. The controllers with OS Microsoft
Windows Mobile 6.5 are fully compatible with the third party software such as Carlson SurvCE,
MicroSurveyFieldGenius, Digiterra Explorer, EsriArcPad etc. besides standard field&GIS software made
by HI-TARGET. HI-TARGET controller with WiFi, Bluetooth, and GPRS/3G is completely wireless to
connect to any device, collect data and connect to server simultaneously and seamlessly.
Post-processing Software
HI-TARGETGeomatics Office (HGO) software provides total GNSS solution with a complete suite of
programs to support HI-TARGET GNSS receivers. Standard Rinex data and HI-TARGET raw data can be
processed flexibly and easily.
Techanical Parameters:
MEASUREMENTS
• 220 Channels
• Advanced Pacific Crest Maxwell 6 Custom Survey GNSS Technology
• High precision multiple correlator for GNSS pseudo range measurements
• Unfiltered, unsmoothed pseudo range measurements data for low noise, low multipath error, low time
domain correlation and high dynamic response
• Very low noise GNSS carrier phase measurements with <1 mm precision in a 1 Hz bandwidth
• Signal-to-Noise ratios reported in dB-Hz
• Proven Pacific Crest low elevation tracking technology
Satellite signals tracked simultaneously
GPS: Simultaneous L1C/A, L2C, L2E, L5
GLONASS: Simultaneous L1C/A, L1P, L2C/A (GLONASS M only), L2P
SBAS: Simultaneous L1 C/A, L5
Galileo: Simultaneous L1 BOC, E5A, E5B, E5AltBOC
BDS/Compass(optional): B1, B2
QZSS: L1 C/A, L1 SAIF, L2C, L5
POSITIONING PERFORMANCE
Static and Fast Static GNSS surveying
Horizontal: 2.5mm+0.5ppm RMS
Vertical: 5mm+0.5ppm RMS
Post Processing Kinematic
(PPK / Stop & Go) GNSS surveying
Horizontal: 1cm+1ppm RMS
Vertical: 2.5cm+1ppm RMS
Initialization time: typically 10 minutes for base while 5 minutes for rover
Initialization reliability: typically > 99.9%
RealtimeKinematic(RTK) surveying
Horizontal: 8mm+1ppm RMS
Vertical: 15mm+1ppm RMS
Initialization time: typically < 8 seconds
Initialization reliability: typically > 99.9%
Code Differential GNSS positioning
Horizontal: 25cm+1ppm RMS
Vertical: 50cm+1ppm RMS
SBAS[iv]: 0.50m Horizontal, 0.85m Vertical
HARDWARE
Physical
Dimensions (W x H): 19.50cm x 10.40cm(7.68 in x 4.09 in)
Weight: 1.3kg (2.86lb) with internal battery, internal radio, standard UHF antenna
Operating temperature: -45℃to +65℃ (-49℉ to +149℉)
Storage temperature: -55℃ to +85℃ (-67℉ to +185℉)
Humidity: 100%, considering
Water/dustproof: IP67 dustproof, protected from temporary immersion to depth of 1m (3.28ft).
Shock and Vibration: Designed to survive a 3m(9.84ft) natural fall onto concrete.
Electrical
Power 6V to 28V DC external power input
Power consumption 2.5W
Automatic Switching between internal power and external power
Rechargeable, removable 7.4V, 4400mAh Lithium-Ion battery in internal battery compartment
Internal battery life
Static 13 - 15 hours
RTK Rover (UHF/GPRS/3G) 10 - 12 hours
RTK Base 8 - 10 hours
I/O interface
1 x Bluetooth
1 x standard USB2.0 port
2 x RS232 serial port
2 x DC power input (8-pin & 5-pin)
COMMUNICATION AND DATA STORAGE
GPRS/GSM or 3G
Fully integrated, fully sealed internal GPRS/GSM or 3G
Network RTK (via CORS) range20-50km
HI-TARGET internal UHF radio (standard)
Frequency: 460 MHz with 116 channels
Transmitting Power: 0.1W, 1W, 2W adjustable
Transmitting Speed: Up to 19.2Kbps
Working Range: 3~5Km typical, 8~10km optimal
Pacific Crest ADL Foundation internal UHF radio
Frequency: 390~430 MHz or 430~470 MHz
Transmitting Power: 0.1W, 0.5W, 1W adjustable
Transmitting Speed: Up to 19.2Kbps
Support most of radio communication protocol
Working Range: 3~5km typical, 8~10km optimal
HI-TARGET External UHF radio (standard)
Frequency: 460 MHz with 116 channels
Transmitting Power: 5W, 10W, 20W, 30W adjustable
Transmitting Speed: Up to 19.2Kbps
Working Range: 8~10Km typical, 15~20km optimal
Pacific Crest ADL Vantage Pro External UHF radio
Frequency: 390~430 MHz or 430~470 MHz
Transmitting Power: 4W to 35W adjustable
Transmitting Speed: Up to 19.2Kbps
Support most of radio communication protocol
Working Range: 8~10Km typical, 15~20km optimal
Support other external communication device
For example, external GSM modem.
Data storage
64MB internal memory
Data formats
(1Hz positioning output, up to 50 Hz - depends on installed option)
CMR: sCMRx, CMR, CMR+input and output
RTCM: RTCM 2.1, 2.2, 2.3, 3.0, 3.1 input and output
Navigation outputs ASCII: NMEA-0183 GSV, AVR, RMC, HDT, VGK, VHD, ROT, GGK, GGA, GSA, ZDA,
VTG, GST, PJT, PJK, BPQ, GLL, GRS, GBS
Navigation outputs Binary: GSOF
1 Pulse Per Second Output
2. Total Station A) HTS-220/R Total Station
System Features Technical parameters
System Features:
Dual-axis Compensation
The HTS-220/R is configured with advanced dual-axis compensator for auto error elimination and auto
accuracy compensation.
Absolute Encoding
The absolute encoding disk ensures high accuracy, efficiency and stable performance. Initialization is
needless but to measure the angle immediately as the HTS-220/R is turned on. The azimuth information
won’t be missed even the HTS-220/R is power-off unexpectedly.
High-performance MCU SMT32
The STM32 MCU based on ARM Cortex™-M processor enables the HTS-220/R has extra high
processing speed and low-power consumption.
Bluetooth
The Bluetooth wireless technology makes HTS-220/R accessible to any data collector for real-time
communication. The third party field software such as Carlson SurvCE is fully compatible with the HTS-
220/R.
Data Storage
Diversified data transfer options such as SD card, USB pen drive, mini-B interface.
Backlight
The display and keyboard with backlight for working in the dark.
Diagonal Eyepiece
Support diagonal eyepiece for observations at steep line of sight.
Calibration Software
The proprietary HI-TARGET Calibration software is accessible for real-time diagnosis to ensure trouble-
free operation.
Data Transfer Software
The proprietary HI-TARGET data transfer software supports different type of output data format, which
can be used in AutoCAD or other brands’ post processing software.
TECHNICAL PARAMETERS:
Angle Measurement
Measurement Method: Absolute Encoding
Minimum Readout: 1″/5″/10″(0.3mgon/1.5mgon/3mgon)adjustable
Accuracy1 : 2”
Distance Measurement (HTS-220 with Reflector)
Single Prism: 3000m (9,842ft.) under good condition3
Three Prisms: 6000m (19,685ft.) under good condition3
Reflective Sheet: 800m (2,624 ft.)
Accuracy: 2 mm +2ppm
Measuring Time (Fine/Quick/Tracking): 1.5s/1s/ 0.5s
Distance Measurement (HTS-220R Reflectorless)
Reflectorless2 Range: 350m (1,148 ft.)
Single Prism: >7500m (24,606ft.)
Accuracy: 3mm+2ppm
Measuring Time: 1.5s
Telescope
Magnification: 30X
Field of View: 1°30′ (2.7m at 100m)
Minimum Focusing Distance: 1.5m
Reticle: Illuminated
Compensator
System: Single-axis liquid tilt sensor/Dual-axis (optional)
Working Range: ±3′
Setting Accuracy: 1″
CommunicationBluetoothInterface: Standard RS232, SD card4, USB pen drive, mini-BInternal Data Memory: Approx. 20,000 PointsData Format: ASCII OperationOperation system: Real-time Operating SystemDisplay: High resolution backlight black and white display with contrast adjustment/ Graphics: 280 x 160 pixels / Character: 6 lines x 25 charactersKeyboard: 2 sides Alphanumeric backlit crystal keyboard Laser Plummet
Type: Laser point, 4 brightness levels adjustment / Optical plummet (optional)Centering Accuracy: 1 mm at 1.5m instrument height Power SupplyBattery Type: Rechargeable Li-ion batteryVoltage/Capacity: ZBA-400: 7.4V (DC) / 3000mAhOperating Time With ZBA-400: Optimal 16 hours5 (Continuous angle measurement every 30 seconds) / 10 hours (typical)Measuring Times: Approx. 12000 times WeightWeight (Incl. Battery&Tribrach): Approx. 5.5kg (12.1lb.) EnvironmentalOperating Temperature: -20℃ ~﹢50℃ ( -4℉ to +122℉)Storage Temperature: -40℃ ~﹢70℃ (-40℉to + 158℉)Dust&Water Proof (IEC60529 Standard)/Humidity: IP65, 95%, non-condensing
B) ZTS-320/R Total Station
System Features Technical parameters
Systems Features:
Absolute Encoding
The absolute encoding disk ensures high accuracy, efficiency and stable performance. Initialization is
needless but to measure the angle immediately as the ZTS-320/R is turned on. The azimuth information
won’t be missed even the ZTS-320/R is power-off unexpectedly.
Dual-axis Compensation
The ZTS-320/R is configured with advanced dual-axis compensatorfor auto error elimination and auto
accuracy compensation.
High-performance MCU
The STM32 MCU based on ARM Cortex™-M processor enables the ZTS-320/R has extra high
processing speed and low-power consumption.
Bluetooth
The Bluetooth wireless technology makes ZTS-320/R accessible to any data collector for real-time
communication. The third party field software such as Carlson SurvCE is fully compatible with the ZTS-
320/R.
Data Storage
Diversified data transfer options such as SD card, USB pen drive, mini-B interface.
Backlight
The display and keyboard with backlight for working in the dark.
Diagonal Eyepiece
Support diagonal eyepiece for observations at steep line of sight.
Calibration Software
The proprietary HI-TARGET Calibration software is accessible for real-time diagnosis to ensure trouble-
free operation.
Data Transfer Software
The proprietary HI-TARGET data transfer software supports different type of output data format, which
can be used in AutoCAD or other brands’ post processing software.
Technical Parameters:Angle Measurement
Measurement Method: Absolute Encoding
Minimum Readout: 1″/5″/10″(0.3mgon/1.5mgon/3mgon)adjustable
Accuracy1 : 2”
Distance Measurement (ZTS-320 with Reflector)Single Prism: 3000m (9,842ft.) under good condition3
Three Prisms: 6000m (19,685ft.) under good condition3
Reflective Sheet: 800m (2,624 ft.)
Accuracy: 2 mm +2ppm
Measuring Time (Fine/Quick/Tracking): 1.5s/1s/ 0.5s
Distance Measurement(ZTS-320R Reflectorless)Reflectorless2 Range: 350m (1,148 ft.)
Single Prism: >7500m (24,606ft.)
Accuracy: 3mm+2ppm
Measuring Time: 1.5s
TelescopeMagnification: 30X
Field of View: 1°30′ (2.7m at 100m)
Minimum Focusing Distance: 1.5m
Reticle: Illuminated
CompensatorSystem: Single-axis liquid tilt sensor/Dual-axis (optional)
Working Range: ±3′
Setting Accuracy: 1″
Communication
Bluetooth
Interface: Standard RS232, SD card4, USB pen drive, mini-B
Internal Data Memory: Approx. 20,000 Points
Data Format: ASCII
OperationOperation system: Real-time Operating System
Display: High resolution backlight black and white display with contrast adjustment/ Graphics: 192 x
96 pixels / Character: 6 lines x 25 characters
Keyboard: 2 sides Alphanumeric backlit crystal keyboard
Laser PlummetType: Laser point, 4 brightness levels adjustment / Optical plummet (optional)
Centering Accuracy: 1 mm at 1.5m instrument height
Power SupplyBattery Type: Rechargeable Li-ion battery
Voltage/Capacity: ZBA-400: 7.4V (DC) / 3000mAh
Operating Time With ZBA-400: Optimal 16 hours5 (Continuous angle measurement every 30
seconds) / 10 hours (typical)
Measuring Times: Approx. 12000 times
WeightWeight (Incl. Battery & Tribrach): Approx. 5.5kg (12.1lb.)
EnvironmentalOperating Temperature: -20℃ ~﹢50℃( -4℉ to +122℉)
Storage Temperature: -40℃ ~﹢70℃(-40℉to + 158℉)
Dust &Water Proof (IEC60529 Standard)/Humidity: IP65, 95%, non-condensing
C) ZTS-120/R Total Station
System Features Technical parameters
System Features:
1.Multi-dot matrix LCD display both face Alpha-numerical Keyboard
Hi-Target ZTS-120/120R series total station designed with multi-dot matrix LCD display,
which can show almost all of the measurement information at one time. The big screen withlighting
function can show the menu structureand practical measurement procedures more concisely and
clearly. Both Face Alpha-numerical keyboards can realize your various measurement tasks fast and
conveniently.
2.Integrated of optical, mechanical and electrical precision ranging system
Hi-Target ZTS-120/120R series total station integrated the high precision ranging system, which
combined with high stability mechanical structure, and high integrated circuit design, greatly
improving the ranging accuracy and stability.
3.High efficient absolute encoder angle measurement system
Hi-Target ZTS-120/120R Series Total Station adopts high efficiency absolute encoder technology,
highly enhancing the angle accuracy and stability, improving the degree of automation
♦No need initialiation when start up
♦Automatically saves the horizontal angle after turning off, no need to re-orientate
at the same station when re-starting up, can retain the original information when re-start after power-
off. More convenient for surveying and instrument’s maintenance.
4.Reflectorless Distance Measurement technology
Distance measuring with slender laser beam
♦Hi-Target ZTS-120/120R series total station designed with the slender laser beam precise
ranging technology, which can pass through finedraw, gridding objects, fast and accurately aiming
the target and getting the correct result without any impact.
♦Convenient to make sure the co-axiality of sight axis and ranging axis.
♦Small angle target precise ranging
5.Intelligent Calibration
Hi-Target total station has integrated the elements of production, installation, detection, maintenance
etc. into R&D and design phase, Special maintenance calibration software, make it easy to realize
the basic maintenance and calibration completely through software, and supporting the remote
assistance
6.Multiple Built-in Software
♦Point Stakeout
♦Line Stakeout
♦Angle Distance Stakeout
♦Coordinate Measurement
♦Resection
♦Remote elevation measurement
♦Missing Line Measurement
♦Single- Distance Offset
♦Two- Distance Offset
♦Angle Offset
♦Distance Offset
♦Point Projection
♦Elevation Intersection
♦Azimuth Measurement
Technical Parameters:
Model
Angle Measurement(Hz,V)
Method Absolute Code
Minimum Reading 1″
Angle Accuracy 2″
TelescopeMagnification 30X
Field of View 1°30′
Shortest Focus Distance 1.5m
Reticle Illuminated
Compensator
SystemSingle-axis liquid-electric tilt sensor
Compensator
Working Range ±3′
Setting Accuracy 1″
Distance measurement
Reflector (IR)Range Single
Prism(Atmosphere general / good / best )
2000m/2500m/3000m
Reflecto 800m
r(60mmx60mm)Accuracy (Fine/Coarse/Tracking) 2mm±2ppmMeasurement Time
Repeat 1sTracking 0.6s
Reflector-less (RL)
RangeWhite Target board 350mSingle Prism >7500m
Accuracy (short distance/tracking/prism)
3mm±2ppm
Measurement Time(short distance/tracking/prism)
2s
General
Communication
Internal Data Memory 20000 Points
Interface Standard RS232 port (USB port / Bluetooth optional )
Data Format ASCII(DXF/GSI optional )
Operation system Real-time English operating system
Display Graphics:192*96 pixels ,6 line*12 characters
Keyboard Alpha-numerical keyboard
Laser plummetType Laser Point, Brightness Adjustable in
stepsCentering Accuracy 1 mm at 1.5m instrument height
Power supply
Battery Type Lithium-IonVoltage/Capacity ZBA-400:7.4V 3000mAh
Operating time with
ZBA-400
16 hours
24 hous (Continuous Angle
Measurement )Weight (Incl. Battery & Tribrach) 5.5kg
Environmental
Operating temperature -20℃~﹢50℃Storage temperature -40℃~﹢70℃Dust & Water proof (IEC60529)
IP54
2. GIS & MappingA) Q star GIS Collectors:
System Features Technical parameters
System Features:
Shining Points
Faster
Microsoft Windows Mobile 6.5
806MHZ high-speed CPU
256M RAM, 8G flash memory
Higher accuracy
GPS+GLONASS+COMPASS
Advanced PPP technology
Solider
1.5M anti-drop, IP67
Integrated elaborate double color model
Main features
5 million pixel auto focus camera
Accurate centering mode
Integrated high accuracy G-sensor, Centering GNSS antenna phase center accurately
Electronically level GNSS antenna
Multiple wireless communication modes
Integrated 3G communication function, Supports all 3G communication systems
Integrated Bluetooth, WIFI, USB communication , Makes wirelessly assist telemeter &detecting
instrument etc. to work synchronously.
GNSS positioning technology
With reliable GPS+GNSS positioning technology, you can work normally even under hard environmental
conditions.
Support COMPASS satellite navigation system.
Advanced PPP technology realizehigher accuracy even just adopt single point positioning.
3.7 inch QVGA TFT, resolution: 640×480
8800mAh Li-ion battery, over 12 hours’ continuous work
Qstar 8
The most portable handheld RTK
Centimeter level high accuracy
Dual frequency GPS+ GNSS positioning
Meet your surveying requirements even under hard environmental conditions and most extreme weather
conditions
Qstar 6
Sub-meter level accuracy
Flexible operation mode
GPS+ GNSS positioning
Qstar 5
Meters level high accuracy
Receive SBAS to get high accuracy within 1M
Bluetooth & WIFI realize Wireless Collaborative Operation
Technical Parameters:
Model Qstar 8 Qstar 6 Qstar 5
System
Configuration
Operation system: Windows Mobile 6.5 √ √ √
Processor: 806 MHZ √ √ √
RAM: 256MB RAM √ √ √
Flash Memory: 8GB √ √ √
Display: 3.7 inch LED, 640×480
resolution
√ √ √
GNSS Features
Single frequency GPS positioning
technology
√
Single frequency GPS+GLONASS √
Dual frequency GPS+GLONASS √
Support Compass system √
Integrate SBAS (WAAS, EGNOS, MSAS) √ √ √
Time for the first fix(TTFF): 30 seconds √ √ √
Update rate: 1HZ (support higher √ √ √
frequency)
Position
Accuracy
Single point positioning 2m 2.5m 2.5m
SBAS1 < 50 cm < 50 cm < 50 cm
Reference station differential 2cm 20cm 50cm
Static surveying 5mm±1ppm
Application
functions
Integrated 3G communication module √ √ √
5 million pixel camera with LED √ √ √
Built-in microphone & speaker √ √ √
Integrated G-sensor √ √ √
Integrated laser plummet optional
9 keys, with the four arrow keys and
camera key
√ √ √
Data
communication
Bluetooth √ √ √
Mini USB √ √ √
WIFI:802.11b/g √ √ √
MicroSD card slot, support up to 32GB √ √ √
Power supply
8800mAh lithium battery, online charging √ √ √
Over 12 hours continuous work √ √ √
Physical
properties
Size:236mm×105mm×62mm √ √ √
Weight: 835g(with battery) √ √ √
Operating temperature: -30℃ ~ +70℃ √ √ √
Storage temperature: -40℃ ~ +80℃ √ √ √
Dustproof/waterproof: IP67 √ √ √
Anti-shock: 1.5m free fall √ √ √
1.Typical horizontal value, accuracy varies according to regional observation condition.
B) Qmini M
System Features Technical parameters
System Features:
♦Rugged design
♦Microsoft Windows Mobile 6.5
♦806 MHz high-speed CPU
♦Embedded high sensitivity GPS+GLONASS receiver
♦3.7 inch QVGA TFT, sunlight - readable color touch screen
♦5 Megapixel auto-focus camera with LED
♦Field swappable long life Li-Ion battery
Technical Parameters:
Qmini M1 Qmini M3 Qmini MT
Operating system: Windows Mobile 6.5 √ √ √
Processor: 806 MHz √ √ √
RAM: 256 MB RAM √ √ √
Flash memory: 8 GB √ √ √
Display: 3.7 inch LED, 640×480 resolution √ √ √
GPS(20 channels) √
GPS + GLONASS(32 channels) √ √
Support SBAS (WAAS, EGNOS, MSAS) √ √ √
Built-in high sensitivity
anti-interference GPS antenna√ √ √
Update rate: 1 fix/s (user configurable )
√
Update rate: 1 Hz
(configurable w/ future FW 5 Hz Max) √ √
Time to first fix (TTFF): 30 seconds (typical) √ √ √
Single Point Positioning: 5 m √ √ √
SBAS: 1-3 m √ √ √
5 million pixel camera with LED √ √ √
Built-in microphone √ √ √
Built-in speaker √ √ √
E-compass √ √
Bluetooth √ √ √
Mini USB √ √ √
WIFI:802.11b/g √ √ √
MicroSD card slot, support up to 32 GB √ √ √
Built-in GPRS module
(data transmission & phone) √ √ √
RFID reader optional
Bar code scanner √
3.7V, 3100 mAh lithium battery, over 8
hours continuous work, online charging√ √ √
10 keys, with the four arrow keys √ √ √
Size: 152 mm x 82 mm x 32 mm √ √ √
Weight: 315 g (with battery) √ √ √
Operating temperature: -20℃~+70℃Storage temperature: -30℃~+80℃ √ √ √
Dustproof / waterproof: IP65 √ √ √
Anti-shock: 1.5 m free fall √ √ √
3. Theodolites: A) DT-02/DT-02L Theodolite
System Features Technical parameters
System Features:
Laser and Collimation Axis - Coaxial
Visible Laser Point
Intelligent Calibration
Absolute Encoding, Accuracy 2”
Dual Side Large Back-lit LCD
Laser Plummet
Laser Visible Up to 200 Meters
Technical Parameters:
Angle Measurement
Accuracy: 2’’
Reading system: Absolute encoding
Minimum reading: 1’’ /5’’/10’’/20’’(Selectable)
Diameter of circle (VHz): 79mm
Telescope
Image: Erect
Magnification: 30x
Tube length: 150mm
Objective lens: 45mm
Field of view: 1°20′
Resolving power: 4’’
Minimum focusing distance: 2m
Stadia ratio: 100
Stadia constant: 0
Laser Pointer (DT-02L Only)
Method: Focusing
Wavelength/Power: 635nm/1mW
Laser class: Class II
Laser range: 200m(day time)
Spot size: 5mm/100m
Coaxial: 5mm/70m
Display
LCD display type: Dual side back-lit LCD
Data Interface
Serial communication: RS-232
Illumination
Display: Yes
Reticle: Yes
Compensator
Tilt sensor: Liquid-electric vertical detection
Compensating range: ±3′
Accuracy:1’
Laser Plummet
Accuracy: 1mm/1.5m
Level Sensitivity
Plate level: 30’’/2mm
Circular level: 8’/2mm
Power Supply
Battery type: RechargeableNi-H battery
Operating time: 10 hours
Weight
Weight: 4.6kg
Environmental
Operating temperature: -20℃~﹢50℃Water & dust protection: IP54
NEDO: Established over 110 years in surveying engineering with the surveying instruments, measuring tools,
lasers, and laser accessories.
Products are:
Laser and AccessoriesProduct details
Line Laser- QUASAR2
Rotating Laser- Primus 2
Pipe Laser- TUBUS 1
Laser Receiver- ACCEPTOR 2
1)Line Laser
QUASAR2QUASAR2 Simplix Set1000 applications – 1 solution
The QUASAR2 Simplix Set provides a clever and complete solution for levelling and for taking alignments in interior finishing work.Thanks to the well-thought-out Simplix attachment system, the QUASAR2 cross line laser can be fixed to almost anything - walls, steel girders, pipes, poles, ceilings, dry construction sections or the floor. And of course you can also mount the QUASAR 2 on a tripod.
QUASAR2
Easy to useSimply set up the QUASAR 2 cross line laser and switch it on. QUASAR2 projects a readily visible, exactly horizontal and vertical laser line onto the wall. Just perfect for levelling and aligning in interior finishing work.The reliable self-levelling function automatically compensates for inclines of up to ± 4°. Where inclines are larger, the lines flash to indicate that the self-levelling range has been exceeded.
Robust designThe QUASAR2 cross line laser is distinguished by its robust design, making it ideally suited for use under the often adverse conditions on a construction site. The sturdy housing is additionally protected by a strong rubber coating.
Pulse functionThe cross line laser QUASAR2 also features a pulse mode which can be used in conjunction with the optional ACCEPTOR l i ne laser receiver for levelling and aligning even in very bright light.
An innovative click-on attachment allows the laser to be fixed to the Simplix multi-functional bracket and can be smoothly rotated 360°. Simply, safely and swiftly.
Nothing could be more convenient than that!
Multi-functional bracket Simplix
Thanks to the well-thought-out Simplix attachment, the QUASAR2 cross line laser can be fixed to almost anything, allowing a flexible range of applications.The Simplix multi-functional bracket is vertically adjustable and features both rough and fine adjustment for quick and precise laser reading.
1. Eyelet for fixing to a screw
2. Extra-strong magnets for fixing to steel girders
3. Robust tension belt for fixing to beams, pipes etc.
4. Adjustable quick-locking system for easy fixing to ceiling sections and battens of varying diameters
5. Rough and fine adjustment allows rapid height settings
Cross line laser QUASAR 2
Multi-functional bracket Simplix Target board Laser glasses Carrying bag
Accuracy ± 3 mm/ 10mSelf-levelling range ± 4°Working range approx. 20 mLaser Laser class 2M, 635 nmPower supply 4 x 1.5 V, type AAOperation duration approx. 25 hConnecting thread laser
¼’’
Ref.-No. QUASAR2 Simplix-Set
460 880-613
Ref.-No. QUASAR2 withoutMulti-functional bracket Simplix
460 881
2. ROTATING LASERS
Primus2
Nedo PRIMUS2 is the series of fully automatic rotating lasers for professionals.
Ideal for levelling, aligning and grade control. Reliable and rugged for tough construction jobs. Uncompromising quality for professionals. The High-Power laser diode with laser class 3R ensures clear beam visibility even under poor lighting conditions. The Nedo PRIMUS 2
series sets a new standard for fully automatic rotating lasers.
3.Setting Standards for Precision and ReliabilityThe rotating lasers in the PRIMUS 2 series remain extra-ordinarily precise whatever the sit conditions – in continuous rainfall, severe cold or blazing heat. Whether horizontal, vertical or at a gradient. Always reliable, whenever and wherever they are used. The PRIMUS2 casing is protected against jet water and dust in line with IP 66. After use, the PRIMUS 2 can even be sprayed down with water to clean it.
The standard for RuggednessThanks to their innovative shock protection system,
the new rotating lasers of the PRIMUS 2 series can easily withstand a fall from a height of 1 m. The thick lining and rotor protection provide additionalsafety.
Setting Standards for VisibilityAll PRIMUS2 rotating lasers are fitted with high-quality laser diodes with 635 nm wavelength.The customer can choose between high-power laser diodes in laser class 3R or laser diodes inlaser class 2 featuring Bright Beam Technology™ thus ensuring optimum visibility of the laserbeam even under unfavourable light conditions.
The standard for long LifeHigh-Power, rechargeable NiMH batteries with EneloopTM technology ensure a long operating life of more than 100 hours, with minimal self-discharging. The intelligent power
compartment permits quick changing between battery and rechargeable battery operation.
The Standard for Easy OperationAre you tired of over-complicated handling?All PRIMUS2 lasers feature in addition to the standard 5/8" mounting thread the Quick-Fix rapid locking system which allows the laser device to be fixed in just a few seconds to any tripod and just as quickly detached. Just throw the lever for fixing or detaching.
3) Pipe Laser
Pipe laser TUBUS1
TUBUS1 - The new pipe laser from NedoUncompromising quality for professionals, reliable and rugged for tough construction jobs.Thanks to its compact dimensions, in particular its short length, the TUBUS1 can even be used in tight pipe bends. The High-Power laser diode provides a long range and ensures clear beam visibility at all times.
Features:
Extremely robust pipe laser Water-proof to IP 68 Compact dimensions for use in tight pipe bends Red High-Power laser diode for very good beam
visibility Direct grade entry: -10% to +40% Perfect visualization of operation mode: Green
display for rising gradients, red display for fallinggradients
Align-Function to raise the laser beam out of thetrench for easy line setup
Motorized transverse adjustment and automaticcentre of range return
Remote control for easy and convenient handling Rechargeable lithium-ion batteries for long
operating life and quick charging Including a set of 4 feet for easy adjustment to
different pipe diameters
Technical data:Self-levelling range -15% to +45%Gradient range -10% to +40%Levelling accuracy ± 5 mm/100 mLaser type max. 5 mW, laser class 3R,
635 nm
Power supply rechargeable batteriesOperation duration approx. 40 hWeight 3.5 kgDimensions Ø 140 mm
length 270 mmOperating temperature -20°C to + 50°C
4) Laser Receiver:
Nedo Laser Receivers
ACCEPTOR2
Features:
Extremely robust laser receiver Large detector field: 50 mm Large LC display on front and back Bright LED display Adjustable volume Display of remaining battery power Strong magnets for fixing to steel girders Protected against powerful jet water to IP 67 Two accuracy modes: coarse and fine Bubble for easy alignment Multifunctional rod clamp with patented
quick clamp and batter board function Vertical attachment for around-thecorner
applications Stop blade for wood measuring aids
Technical data: Accuracy switchable ± 4.0 mm / ± 1.0 mmLength of detector field 50 mmWorking range (radius) approx. 275 m (depends on laser)Protection class IP 67Power supply 2 x 1,5 V (AA) or rechargeable batteries (NiMH)Operation duration approx. 100 h
Acceptor digitalFeatures:
Large LC display on front and back Displays height difference between laser
level and zero line in mm 2 different zero positions can be selected Size of directional arrow is proportional to
difference in height Features an extra large 127 mm receiver field 5 accuracy modes Audible signal can be switched off Hold function keeps a value on the display Automatic swich-off Extremely robust, IP 67 Easy to handle Display of remaining battery power Bubble for easy alignment Rod clamp for laser receiver
Technical data: Sensitivity coarse/fine switchable, switchable, ± 0.5 mm, ± 1.0 mm,
± 2.0 mm ± 5.0 mm, ± 10 mmLength of detector field 127 mmWorking range (radius) approx. 450 m (depends on laser)Protection class IP 67Power supply 2 x 1.5V AAOperation duration approx. 60 h
ACCEPTORpro
Features:
Extremely robust laser receiver Large detector field Large LC display on front and back Bright LED display Adjustable volume Display of remaining battery power Easy to handle Rod clamp for laser receiver Made in Germany
Technical data: Accuracy switchable, ± 0.5 mm, ± 1.0 mm, ± 2.0 mm, ± 4.0
mmLength of detector field 70 mmWorking range Ø 700 m (depends on laser)Protection class IP 66Operating temperature -20°C to +50°CPower supply 3 x 1.5 V batteries (AA) or rechargeable
batteries (NiMH)Operation duration approx. 100 h
Multi function module COMMANDER2 H2NFeatures:
Robust laser receiver with integratedradio remote control
Large LC display on front and back Plain-language LCD display showing
all the data of the PRIMUS 2 display Bright LED display
Adjustable volume Large detector field Display of remaining battery power Extremely robust Easy to handle Rod clamp for laser receiver Made in Germany
Technical data: Accuracy switchable, ± 0.5 mm, ± 1.0 mm, ± 2.0 mm, ± 4.0
mmLength of detector field 70 mmWorking range Ø 700 m (depends on laser)Protection class IP 66Operating temperature -20°C to +50°CPower supply 3 x 1.5 V batteries (AA) or rechargeable
batteries (NiMH)Operation duration approx. 100 h
Machine control receiver CR600Features:
Good visible LED and LC display on front Display of remaining battery power Adjustable audible signal Rod clamp for laser receiver
Magnetic holder for attachment to machines, steel beams etc.
Technical data: Precision ultra-fine: ± 0.1 mm
super-fine: ± 1.0 mmRod-Mount/Hand-Held Modefine: ± 1.5 mmmedium: ± 3.0 mmcoarse: ± 6.0 mmMachine-Mount Modefine: ± 10 mmcoarse: ± 25 mm
Length of detector field 114 mmAcceptance Angle 270°Protection class IP 54Power supply 3x 1.5 V type AAOperation duration approx. 100 h
STONEX: Stonex is a multinational company, based in Italy, designing and manufacturing high precision surveying instruments for different applications: civil engineering, topography, security, transportation and mining.
Total Station GPS/DGPS Digital Level/Auto Level Theodolite Product details Product details Product details Product details
R1 PLUS S4 D2 STT2 PLUSR2 PLUS S7 T1000/1100R2 PLUS L S8R2W PLUS S9IIIR6
Laser Scanner Echo- Sounder ADL Radio LinkProduct details Product details Product details
X300 E5
1) Total Station
R1 PLUS
\ Download Brochure
R2 PLUS
Download Brochure
R2 PLUS L
Download Brochure
R2W PLUS
Download Brochure
R6
Download Brochure
GPS/DGPS
S4
Download Brochure
S7
Download Brochure
S8
Download Brochure
S9III
Download Brochure
DIGITAL LEVEL
D2
Download Brochure
AUTOLEVELS
T1000/1100
Download Brochure
Theodolite
STT2 PLUS
Download Brochure
Laser Scanner
X300
DOWNLOAD BROCHURE
ECHO SOUNDER
E5
Download Brochure
ADL Radio Link
STS CORPORATION: STS Corporation was originally established as a manufacturer and seller of land surveying instruments in April, 1989 at Nagoya. Over 17 years, we, a young & dynamic company, have always made efforts to design, produce, and commercialize our own brand goods in order to make them comply with market
demands.
LASER EQUIPMENTS Measuring Equipment/Checking Equipment Surveying Instruments Product details Product details Product details
Rotating Laser Level Measuring Equipment Auto Level
STS-H600 Ultrasonic Distance Measure ODM-160 XG Series GSL-400VH STS Series STS-V600 STS-240/280
Combination Laser Checking Equipment Theodolites
CLS240-V4 Checking Mirror SDT10WS AC Live Wire Electroscope AC-40
Line Laser Total Station
STS-8P/9P/10P Series TSS-200 SeriesOriginal detector for 8P/9P/10P SeriesSTS-LX SeriesSTS-Z SeriesOriginal detector for LX Series • Z series
Line Laser Products
Plumb Point Laser OLP-2Laser Mouse LM-130Point Laser RobovectorAdjustment Level MTR-BPMarking Laser ML-7010Multi-Functional Adjustable Wall Mount EKM-400Sliding Stand for Detector DST-150Sustainable Laser Stand Pole LSP-336Laser GlassesLaser TargetElevator Tripod for Laser
Rotating Laser Level Laser Equipments
The seamless laser emission enabled the detector to catch the laser beam anywhere in 360°.
Horizon Rotating Laser with new functions is newly offered at lower price!
Long distance : 600m in diameterCompact design : Light weight and small size
Realized ±8" (±0.38mm/10m) instrument accuracy.It makes more precise measurement available.
The almost seamless laser emission enabled the detector to catch the laser beam anywhere in 360 °
With included remote controller, it is possible to operate from remote place.
This Anti-Vibration function makes the instrument keep leveling continuously without stopping rotation every time it feels slight vibration.
For Horizon and Vertical, only place the instrument.(±5°)It is not necessary to use vial or adjusting screw.
AC Adaptor and Rechargeable Battery are options.
This instrument conforms to IP56 for Water and Dust Proof.It is protected from rain or dust.Due to Vibration Resistance, this instrument can bear being used in hard working condition.
Using included detector, the available range will be about 600m in diameter.
With simple operation on Remote Controller or Instrument Panel at where you only push the direction bottom of where you do not want to emit laser to, you can shut off the laser beam partly except for your operating area. You do not bother other workers anymore.
This instrument body is designed as shock and vibration resistance using rubber material putting around the main body. Improved leveling system enabled shock and vibration resistance more effective.
▪Instrument ▪Tripod ▪Original Hard Case▪Remote Controller ▪Detector ▪Clamp for Detector▪AA dry battery x 6 pcs. 9V dry battery x 2 pcs. Original Hard Case(Do not include in the basic set)■AC Adaptor (SAC-60)■Rechargeable Battery (BTH600)Note: for using this rechargeable battery, AC Adaptor (SAC-60) is necessary.■Sliding Stand for Detector (DST-150)
Item No. STS-H600Laser source 635nm Red Color semi-conductor laserOutput Under 1.5mW Class 3R (JIS C6802:2005)Accuracy ±8" ( ±0.38mm/10m)Automatic leveling range ±5°
Measurement range
1. About 60m in diameter (Condition: Indoor, eyesight, Point laser, Internal lightness 200~300LX)2. About 600m in diameter (Condition: when using detector of SS-H600)
Rotating speed 1000±100RPM
Power supply
Alkaline AA dry battery x 6 pcs. BTH600 Rechargeable battery(Option)Recharging hours about 4~5 hAC100V (need AC Adaptor of option)
Continuous operating time About 30 h (Alkaline battery) About 17 h (Rechargeable battery)
Battery life warning Power pilot lamp blinkUsing temperature range -10°C~45°C
Out of compensation warning Rotation stop, Buzzer sound & Laser beam blink
Safety mode Safety mode lamp blink, Rotation stop, Laser beam blink.Size/weight 140x140x187mm/1.95 kgs.Water and dust proof conform to IP56
Detector SS-H600Display LCD display (LCD 2 sides) Buzzer sound (Volume :big/small/no sound)Detecting distance Max. about 300m in radius (Max. about 600m in diameter )
Detecting accuracyHigh ±0.5mmMiddle ±1.0mmLow ±2.0mm
Power supply S-006P (6F22) Layered dry battery (9V) x 1 pc.Continuous operating time About 36 h
Using temperature range -10°C~45°C
Battery life warning ○Vial Plate vials (vertical and horizon)Illuminating device ○Water and dust proof Conform to IP56Automatic power off About 6 min. after last operation or detection
Size/weight 159x82x28mm /0.25kgs.
Remote controller RC-H600Using range Max. about 50m (Depending on using environment)Power supply Layered Dry Battery 9V S-006P(6F22) typeSize/weight 190x60x26mm/0.15kgs.
Vertical, Horizon and Rotating Green Laser Level Laser Equipments
Newly developed Green Laser Level enabled high visibility and increased efficiency of your operation.
Indoors, the visible laser beam reaches max.100m in diameter.Condition: Point laser, Internal lightness 200~300LX
This instrument conforms to IP56 for Water and Dust Proof.It is protected from rain or dust.Due to Vibration Resistance, this instrument can bear being used in hard working condition.
For Horizon and Vertical, only place the instrument.(±5°)It is not necessary to use vial or adjusting screw.
Using detector, the operational range will be widen to about 400m in diameter.
Original Detector(Option)GSS-400(with clamp)
AC Adaptor and Rechargeable Battery are options.
Green laser beam is five times brighter than red laser beam.Green color has high visibility.
The laser beam will reach to max. about 100m in diameter indoors.Available to measure in Horizon, Vertical and 90°
▪ Instrument ▪Original Hard Case ▪Remote Controller▪ Mount ▪Laser Glasses ▪Target▪ C size dry battery x 4 pcs. 9V dry battery x 1pc. Original Hard Case
(Do not include in the basic set)■Original Detector (GSS-400) with clamp■Aluminum Tripod Flat head (5/8inch) (STS-OL)■AC Adaptor (SAC-60)■Rechargeable Battery (Ni-MH-C2.4) (2pcs./set)Note: When using this rechargeable battery, AC Adaptor (SAC-60) is necessary.■Sliding stand for Detector (DST-150)
Item No. GSL-400VHLaser source 532nm Green Color semi-conductor laserOutput Under 3mW Class 3R (JIS C6802:2005)
Accuracy Horizon ±10"(±0.5mm/10m)Vertical ±15"(±0.75mm/10m)
Automatic leveling range ±5° (About ±8.7%) (Automatic leveling at horizon & vertical)
Measurement range
1. About 100m in diameter(Condition: Indoor, eyesight, Point laser, Internal lightness 200~300LX )2. About 400m in diameter(Condition: when using optional detector GSS-400)
Scanning mode ○ (Long/Short/Do)Rotating speed High ( 500±50RPM) Low (120±50RPM)
Power supplyAlkaline C size dry battery x 4 pcs.Ni-MH-C2.4 Rechargeable battery (Option) Recharging hours about 12 hAC100V (need AC Adaptor for option)
Continuous operating time
About 10 h (Alkaline battery)About 12 h (Rechargeable battery)
Battery life warning Power pilot lamp blinkUsing temperature range 0°C~40°C (recommended temperature: 5°C~35°C)
Out of compensation warning Rotation stop, Buzzer sound & Laser beam blink
Safety mode Safety Mode Lamp blink, Rotation stop, Laser beam blink.Simple slope setting X & Y 2 axesSize/weight 188x150x207mm/2.1 kgs.
Water and dust proof conform to IP56
Detector (Option) GSS-400 (Option)Display LCD display and buzzer sound
Detecting distance About 5m ~ max. about 200m in radius(Please do not use the detector at distance less than 5m.)
Detecting accuracy High ±1mm Low ±5mmPower supply AAA dry battery x 3 pcs.Continuous operating time About 36 h
Using temperature range 0°C~50°C
Battery life warning ○Vial Plate vials (vertical and horizon)Illuminating device ○Automatic power off About 5 min. after last operation or detectionSize/weight 180x82x26mm /0.26kgs.Remote Controller GRC-400VHUsing range Max. about 50m (Depending on using environment)Power supply Layered Dry Battery 9V S-006P(6F22) typeSize/weight 190x60x26mm/0.15kgs.
Vertical, Horizon & Rotating Laser Level Laser Equipments
Innovated Vertical, Horizon and Rotating Laser Level.Designed in light and compact.
For Horizon and Vertical, only place the instrument. (±5°)It is not necessary to use vial or adjusting screw.
Using included detector, operating area will be widen to about 600m in diameter.
This instrument conforms to IP56 for Water and Dust Proof.It is protected from rain and dust.
From remote place, it is able to operate the instrument with this remote controller.
AC Adaptor and Rechargeable Battery are options.
▪Instrument ▪Tripod ▪Original Hard Case▪Remote Controller ▪Detector ▪Clamp for Detector▪Laser Glasses ▪Target▪C size dry battery x 4 pcs, 9V dry battery x 2 pcs.
Original Hard Case(Do not include in the basic set)■AC Adaptor (SAC-60)■Rechargeable Battery (Ni-MH-C4.8)Note: When using this rechargeable battery,AC Adaptor (SAC-60) is necessary.■Sliding Stand for Detector (DST-150)
Item No. STS-V600Laser source 635nm Red Color semi-conductor laserOutput Under 1mW Class 2 (JIS C6802:2005)Accuracy Horizon ±10" (±0.5mm/10m) Vertical ±15" (±0.75mm/10m)Automatic leveling range ±5° (Automatic leveling in horizon & vertical)
Measurement range
1. About 60m in diameter (Condition: Indoor, eyesight, Point laser, Internal lightness 200~300LX)2. About 600m in diameter (Condition: when using detector SS-600)
Scanning mode ○ (Long/Short/Dot)Rotating speed High ( 500±50RPM) Low (120±50RPM)
Power supplyAlkaline C size dry battery x 4 pcs.Ni-MH-C4.8 Rechargeable Battery(Option) Recharging hours about 12 hAC100V (Need AC Adaptor for option)
Continuous operating time About 30 h (Alkaline battery) About 15 h (Rechargeable battery)
Battery life warning Power pilot lamp blinkUsing temperature range -10°C~45°C
Out of compensation warning Rotation stop, Buzzer sound & Laser beam blink
Safety mode Safety Mode Lamp blink, Rotation stop, Laser beam blink.Simple slope setting X & Y 2 axesSize/weight 178x190x138mm/1.6 kgs.Water and dust proof Conform to IP56
Detector SS-600Display LCD display (both sides) and buzzer sound (Volume: Big/Small/No sound)Detecting distance Max. about 300m in radius (Max. about 600m in diameter)
Detecting accuracyHigh ±0.5mmMiddle ±1.0mmLow ±2.0mm
Power supply S-006P(6F22) Layered dry battery (9V) x 1 pc. 30hContinuous operating time About 36 h
Using temperature range -10°C~45°C
Battery life warning ○Vial Plate vials (vertical and horizon)Illuminating device ○Automatic power off About 6 min. after last operation or detectionSize/weight 159x82x28mm /0.25kgs.
Remote Controller GRC-400VHUsing range Max. about 50m (Depending on using environment)Power supply Layered Dry Battery 9V S-006P(6F22) typeSize/weight 190x60x26mm/0.15kgs.
※ Original color and putting your desired letters on the products are available. In this case, please feel free to contact us about its minimum order quantity, etc.
(e.g.) Green Laser Level, GSL-400VH Lite-Blue Color.
(e.g.) Green Laser Level, GSL-
400VH White Color.
(e.g.) Green Laser Level, GSL-
400VH Yellow Color.
(e.g.) Laser Level, STS-H600
Green Color.
(e.g.) Laser Level, STS-H600
Yellow Color.
(e.g.) Laser Level, STS-H600
Red Color.
Combination Laser
CLS240-V4
Combination Laser Laser Equipments
State-of-the-art Combination LaserThis is the combination of Rotating Laser and 4V Line Laser.
Basic set(with flat head tripod)
Elevator tripod set(with ELT-SL tripod)With elevator tripod with shifting function
This instrument conforms to IP54 for Water and Dust Proof. It is protected from rain or dust.
It can emit more stabile laser bean than gimbals system.Compensating range is very wide as ±5°(With warning function for out of compensation range.)
This Detector can be used for both Rotating Laser and Line laser only by switching.
Horizon : ±0.5mm/10mVertical : ±1.0mm/10m (±20")
This is warning function to avoid measuring error due to vibration.
By using included Detector, using range of Rotating Laser will be 120m in radius(240m in diameter) and of Line Laser will be max. 50m(double verticals 100m)
You can choose the laser beam pattern freely from rotating laser beam ON/OFF and double vertical lines OFF or 1 vertical or 2 vertical lines.
These screws are placed at both sides of right and left and can screw endlessly.
AC Adaptor and Rechargeable Battery are options.Horizon: High accuracy, wide range and all round rotating system.
Vertical: Efficient 4 lines laser bean.
▪Instrument ▪Tripod ▪Original Hard Case ▪Remote Controller ▪Detector ▪Clamp for Detector ▪Laser Glasses & Target ▪C size dry battery x 4 pcs. 9V dry battery x 2 pcs.
(Do not include in the basic set)■AC Adaptor (SAC-60)■Rechargeable Battery (Ni-MH-C2.4)Note: When using this rechargeable battery,AC Adaptor(SAC-60) is necessary.■Sliding Stand for Detector (DST-150)
Item No. CLS240-V4
Laser source 635nm • 650nm (Down Plumb Bean Point)Red Color semi-conductor laser
Output Under 3mW Class 3R (JIS C6802:2005)Pulse width/frequency 50μs/ 10kHz ±10% (Vertical Line Laser)Accuracy Horizon ±10" (±0.5mm/10m) Vertical ±20"(±1.0mm/10m)Line laser beam width 1.5mm/5mAutomatic leveling system Automatic leveling in electronic control ±5°
Measurement range Rotating LaserAbout 60m in diameterCondition: Indoor, eyesight, Point laser, Internal lightness 200~300LXAbout 240m in diameter with included Detector, MSS-120
Line Laser
About 30mCondition: Indoor, eyesight, Depending on internal lightnessMax. about 50m with included Detector, MSS-120.
Slope warning ○ All lasers blink and stop rotation.Rotating function ○ 360°Rotation slight movement device ○ endless all round movement is available. Placed at left and right sides.
Scanning mode Long/Middle/Short/Dot 4 stages (Rotating Laser)Rotating speed High (about 500RPM) Low (about 200RPM) 2 stages
Power supplyAlkaline C size dry battery x 4 pcs.Ni-MH-C2.4 Rechargeable Battery (Option) Recharging hours about 12 hAC100V (Need AC Adaptor for option)
Continuous operating time
Emission of all lasers : about 9 hEmission of H laser : about 20 hEmission of 2V lasers : about 24 hEmission of 1V laser : about 36 h(Using alkaline battery)Rechargeable battery : emission of all lasers about 5 h
Battery life warning ○ Power Pilot Lamp blinkUsing temperature range -10°C~45°C
Safety mode ○ Safety Mode Lamp blink, Rotation stop, Laser beam blink.Simple slope setting X & Y 2 axesSize/weight 140xH288mm/2.6 kgs.Water and dust proof ○ Conform to IP56
Detector MSS-120Display LCD display, high brightness LED(3 colors) at front side, side display, buzzer sound.
Detecting distance Rotating Laser : 1.5m~ max. 120m in radius (Max. 240m in diameter.)Line Laser : 1.5m~max.50m (depending on using environment)
Detecting accuracy
Rotating LaserHigh ±1mm Low ±2.5mmLine LaserWithin 15m: ±0.5mm Under 35m: ±1.0mm Over 35m : ±1.5mm
Power supply S-006P(6F22) Layered dry battery (9V) x 1 pc.Continuous operating time About 30 h
Using temperature range -10°C~45°C
Battery life warning ○Vial 2 pcs. in vertical and horizonAutomatic power off ○ About 6 min. after last operation or detectionSize/weight 150x80x28mm /0.2kgs.
Remote Controller GRC-400VHUsing range Max. about 50m (Depending on using environment)Power supply Layered Dry Battery 9V S-006P(6F22) typeSize/weight 190x60x26mm/0.15kgs.
※ Original color and putting your desired letters on the products are available. In this case, please feel free to contact us about its minimum order quantity, etc.
(e.g.) Combination Laser,
CLS240-V4 Lite-Blue Color.
(e.g.) Combination Laser, CLS240-V4 Yellow
Color.
(e.g.) Combination Laser,
CLS240-V4 Green Color.
Line Laser
STS-8P/9P/10P SeriesOriginal detector for 8P/9P/10P SeriesSTS-LX SeriesSTS-Z SeriesOriginal detector for LX Series • Z series
Line Laser Laser Equipments
STS-8P (with tripod)
STS-8PJ (with detector & tripod)
PDF Catalogue
STS-9P (with tripod)
STS-9PJ (with detector & tripod)
STS-10P (with tripod)
STS-10PJ (with detector & tripod)
Respond to a detectorWith slight movement screwWith warning sensor for tiltWith warning sensor for unlockingAble to project a lower horizontal line
▪Tripod for laser ▪Aluminum-made case ▪AA Dry battery x 3 pcs.※Detector set ▪Detector SS-50 ▪Clamp for Detector ▪9V dry cell battery
Item No.STS-8P STS-9P STS-10P
Light source 635nm visible semiconductor lasers
635nm visible semiconductor lasers
635nm visible semiconductor lasers
OutputUnder 1mW, JIS Class2 Under 1mW, JIS Class2 Under 1mW, JIS Class2
Working temperature range
-10℃~45℃ -10℃~45℃ -10℃~45℃Line projection Horizontal or Vertical 130
°/Plumb-bob Vertical Angle 120 °
Horizontal or Vertical 130 ° Horizontal or Vertical 130 °
Line width1.5mm / 5m 1.5mm / 5m 1.5mm / 5m
Automatic compensating range
±3° ±3° ±3°
Automatic compensating system
Gimbal ring design 2 Axes Gimbal ring design 2 Axes Gimbal ring design 2 Axes
Slight movement equipment
Available Available Available
Out of compensation warning
Buzzer & Blinking( laser beam)
Buzzer & Blinking( laser beam)
Buzzer & Blinking( laser beam)
Warning for unlocking Buzzer Buzzer Buzzer
Projection Flexible from off to full light Flexible from off to full light Flexible from off to full light
Mode
Power Supply AA size alkaline dry cell battery x 3 pcs.
AA size alkaline dry cell battery x 3 pcs.
AA size alkaline dry cell battery x 3 pcs.
Warning for battery life Blinking(main lamp) Blinking(main lamp) Blinking(main lamp)
Battery life(for continuous use)
For 1 laser projection: 36 hoursFor 2 lasers projection:16 hoursFor full lasers projection:8 hours
For 1 laser projection: 36 hoursFor full lasers projection:16 hours
For 1 laser projection: 36 hoursFor full lasers projection:18 hours
Size/WeightΦ108 x H203mm / 1.3kg Φ108 x H203mm / 1.3kg Φ108 x H203mm / 1.3kg
Original detector for 8P/9P/10P Series Laser Equipments
Using original SS-50, it is able to detect the laser within max. about 50m in where the laser beam can not be seen.
Specially designed for STS-8P,9P & 10PDetectable distance:Maximum 50m
Item No.SS-50
DisplayLCD/High brightness LED(3 colors)/Triple Displays (Front & both sides)/Buzzer
Detectable distance From 1.5m to maximum 50m (Provided that near the center of laser line. It differs in the working environment. )
Accuracy within 15m : ±0.5mmUnder 35m : ±1.0mmOver 35m : ±1.5mm
Power supplyS-006P(6F22) type layered (9V) dry cell battery x 1 pc.
Battery lifeApprox. 30 hours of continuous use (when using alkaline battery)
Working temperature range -20℃~50℃Warning for battery life Available
Horizontal bubble vial Available
Automatic power-off Function Available, The unit shut itself off after approx. 6 minutes after the last operation or
detecting beam.
Size/Weight150 x 80 x 28mm / 0.2kg
Line Laser Laser Equipments
Conforming to IP54, this instrument can bear working in harsh environment.Even indoor operation,
Using original SS-50Z, it is able to detect the laser within max. about 50m in where the laser beam can not be seen. Original Detector
dust proof is necessary.
SS-50Z (Option)
Adopted lighting vial to make your operation easy even in dark environment.It also helps avoiding forgetting turning off the switch.
Able to attach to elevator tripod for Line Laser, and also available for surveying tripod (5/8 inch) using the attachment.
It can emit laser from about 4 cm to the wall.Useful in operation at very close distance to the wall.
Rotating slight movement screw makes marking on floor easy.Touch panel of strong dust resistanceSlope warning sensor and remaining battery warning
■Instrument ■Original Case■Surveying tripod attachment■AA Dry battery x 3 pcs.
Original Hard Case
(Do not include in the basic set)■SS-50Z (Original Detector)■EL-CM (Elevator Tripod for Laser)
Item No.STS-LX8 / STS-LX9
Laser source635nm Red Color semi-conductor laser
OutputUnder 1mW Class 1M (JIS C6802:2005)
Pulse 50μs/ 10kHz ±10%
width/frequency
Line width1.5mm/5m
Accuracy Horizon • Vertical ±1mm/5mCross lines on the ceiling ±1mm/3m (STS-LX8 only)
Automatic compensation Range
±3º
Slope warningOut of compensation: All laser blink.
Working systemMagnetic System
Rotation360º
Rotation slight movement device available range about 3º (about 260mm at 5m)
Remaining battery warning Main Pilot Lamp and Vial Lamp blink.
Power supplyAlkaline battery AA(LR6) x 3 pcs.
Continuous operating time
Emission of one laser (Horizon): about 48 hEmission of one laser (Vertical • Down Plumb Beam Point):about 32 hEmission of all lasers: about 18 h (In case of using Alkaline battery at 20ºC)
Using temperature range -10ºC~45ºC
Water and dust proof Conform to IP54
Detectoravailable, use our SS-50Z (Optional)
Outdoor max. reaching distance about 50m (condition: using SS-50Z but it will differ depending on surrounding
condition.)
Size/weightφ80 x H188mm/0.9kgs.
Line Laser Laser Equipments
Innovating technology makes your operational efficiencygreatly increase.
STS Laser "Z" series
Conforming to IP54, this instrument can bear working in harsh environment.Even indoor operation, dust proof is necessary.
Using original SS-50Z, it is able to detect the laser max. about 50m in where the laser beam can not be seen. Original Detector
SS-50Z (Option)
Adopted lighting vial to make your operation easy even in dark environment. It also helps avoiding forgetting turning off the switch.
Able to attach to elevator tripod for Line Laser, and also available to surveying tripod (5/8 inch) using the attachment.
AC Adaptor is option.
Rotating slight movement screw makes marking on floor easy.Touch panel of strong dust resistanceSlope warning sensor and remaining battery warning
■Instrument ■Original Case ■Surveying Tripod Attachment■AA Dry battery x4 pcs.
(Do not include in the basic set)■SS-50Z (Original Detector)■EL-CM (Elevator Tripod for Laser)■SAC-60 (Original AC Adaptor)
Item No.STS-Z41/STS-Z31/STS-Z21
Laser source 635nm • 650nm (Down Plumb Beam Point)Red Color semi-conductor laser
OutputUnder 1mW Class 1M (JIS C6802:2005)
Pulse width/frequency 50μs/ 10kHz ±10%
Line width1.5mm/5m
Accuracy Horizon • Vertical ±1mm/5m;Cross Lines on the ceiling ±1mm/3m
Automatic compensation range
±3º
Slope warningOut of compensation: All laser blink.
Working systemMagnetic System
Rotation360º
Rotation slight movement device available range about 3º (about 260mm at 5m)
Remaining battery warning Main Pilot Lamp blink
Power supply Alkaline battery AA (LR6) x 4 pcs.Using optional AC Adaptor, available to AC100V.
Continuous operating time(Condition: Alkaline dry battery at 20ºC)
STS-Z41: Emission of one laser: about 40 hEmission of three lasers: about 15 hEmission of all lasers: about 8 h
STS-Z31: Emission of one laser: about 40 hEmission of two lasers: about 26 hEmission of all lasers: about 11 h
STS-Z21: Emission of one laser: about 40 hEmission of two lasers: about 26 hEmission of all lasers: about 15 h
Using temperature-10ºC~45ºC
Water and dust proof Confirm to IP54
Detectoravailable, use our SS-50Z (Optional)
Outdoor max. reaching distance about 50m (condition: using SS-50Z but it will differ depending on surrounding condition.)
Size/weightφ100 x H205mm (Body partsφ100)/1.2kgs.
Original detector for LX Series • Z series Laser Equipments
Original Detector in slim and compact.
Achieved to develop the best quality of the world level for both size and accuracy.※Offset error margin can be reduced due to the
thinnest body of 19mm ever.Conform to IP56 for water and dust proof.LED which shows the detecting position can be
confirmed from 3 directions. (3 colors LED)
■Detector ■Rod Clamp ■AAA Dry battery x 3 pcs.
Item No.SS-50Z
Display High bright LED (3 colors) Triple display (Front/Back and Side)Buzzer sound
Detecting accuracy within 15m ±0.5mmLess than 35m ±1.0mmOver 35m ±1.5mm
Power supplyAAA Dry battery ; x 3 pcs.
Continuous operating time About 50 h (Alkaline battery)
Using temperature range -20°C~+50°C (But without being dewy.)
Water and dust proof Conform to IP56
Battery life warningPower Pilot Lamp blink.
Automatic power off About 6 min. after last operation or detection
Size/weight 150x52x19mm /145g
Due to products improvement, the specification and appearance may change without any notice.
※ Original color and putting your desired letters on the products are available. In this case, please feel free to contact us about its minimum order quantity, etc.
(e.g.) Line Laser, STS-Z31 Yellow
Color.
(e.g.) Line Laser, STS-Z31 Red
Color.
(e.g.) Line Laser, STS-Z31 Lite-Blue
Color.
(e.g.) Line Laser, STS-LX8 Green
Color.
(e.g.) Line Laser, STS-LX8 Yellow
Color.
(e.g.) Line Laser, STS-LX8 Red
Color
Laser Related Products
Plumb Point Laser OLP-2Laser Mouse LM-130Point Laser RobovectorAdjustment Level MTR-BPMarking Laser ML-7010Multi-Functional Adjustable Wall Mount EKM-400Sliding Stand for Detector DST-150Sustainable Laser Stand Pole LSP-336Laser GlassesLaser TargetElevator Tripod for Laser
Plimb Point Laser Laser Equipments
Automatic Compensation function of ±4.5°Even not at completely flat place, the instrument can automatically compensate and be able to emit laser to up and down plumb beam points.If the slope of the instrument is out of compensation range of ±4.5°, it will inform you by both buzzer sound and laser blinking.
Slide table can move right and left freely.Powerful magnet is very efficient in working on assembling Iron Frame.
Down plumb beam point can be copied to the ceiling momentarily.Automatic compensation range is very wide at ±4.5°Powerful magnet makes it possible to fix this instrument on steel surface.The laser is emitted to the center of the target included.It is very convenient for
management of iron frame in vertical, etc.
▪Instrument ▪Laser Target x 2 sheets▪Fixing Belt ▪Instruction Manual▪AA size dry battery x 3 pcs. (for test operation)
Item No.OLP-2
Light source635nm Red Color semi-conductor laser
OutputUnder 1mW Class 2 (JIS C6802:2005)
Accuracy ±3mm/15m
Laser beam diameterabout Ф3mm at 5m distance (Indoor lightness: 200~300LX)
Automatic compensation range ±4.5°
Automatic compensation system Ring gimbals system (2 axes)
Slope warningLaser beam blink, Buzzer sound
Working systemMagnetic system
Remaining battery warning Main Lamp blink
Connecting screw to ○ 5/8 inch
tripod
Using temperature-10°C~45°C
Power supplyAlkaline battery AA size x 3 pcs.
Continuous operating time about 38h (Using alkaline battery) *Included batteries are only for test operation.
Size/weight104x100x72mm/0.83kg
Laser Mouse Laser Equipments
PDF Catalogue
Attached adhesive tape on the back side of unit enables you to mark horizontal and vertical line on wall already finished surface of wall without giving any damage to it.
With build-in 2 bubble vials for horizontal and vertical direction, able to project a laser beam horizontally or vertically in a moment.
▪Nylon bag ▪AA size dry cell battery x 2 pcs. ▪Adhesive tape (Rubber-made)
Item No.LM-130
Light source635nm visible semiconductor laser
OutputUnder 1mW JIS Class 2
Accuracy for projected laser ±1.3mm/1m
Working temperature range -10°C~40°C
Power supplyAA size alkaline dry cell battery x 2 pcs.
Battery life Over 60 hours of continuous use (when using alkaline battery)Size/Weight
112 x 60 x 43 mm/130g
Point Line Laser Laser Equipments
Special for indoor use, ultra-compact body Point Line Laser.Horizon Vertical Cross lines on the ceiling 90°
e.g. When attached on elevator tripod for laser.
Only putting the instrument, automatic leveling will be done.Due to the magnet, the instrument can be fixed firmly on iron frames.Able to fix to a pipe with original belt.Able to attach to the tripods (6mm/ 5/8 inch).Dust and dew resistance design
▪Instrument ▪Case ▪Target ▪Laser Glasses▪Belt ▪AA size dry battery x 3 pcs. ▪Instruction Manual
Item No. Robovector
Light source635nm Red semi-conductor laser
OutputUnder 1mW JIS class 2
Automatic compensation range
4° (Blinking in case of out of compensation)
Accuracy ±1mm/5m
Power supplyAlkaline AA size dry battery x 3 pcs. (20h)
Size/weight100 x 75mm/380g
Adjustment Level Laser Equipments
Hight adjustable plate which can be attached to Elevator Tripod for Laser products.
Using 3 screws of MTR-BP, it enables hight adjustment which is usually difficult to do by Elevator tripod.
Item No. MTR-BP
Tripod core diameter 5/8 inch
Up-and-down adjustment range 15mm
Size70mmφ(Upper) x 73mmφ(Lower)
Weight340g
Marking Laser Laser Equipments
Fix the place of operation with emitting laser line.Very convenient to use at the place where marking is impossible.Focus adjustment is available so that it can project laser line very sharply meeting
with distance of emission.Using the table, the direction of emission can be freely adjusted.
Item No.ML-7010
Light source635nm Red Semi-conductor Laser
Outputunder 5mW Class 2M (JIS C6802:2005)
Emission angle70°
Focus adjustment system Lens Focus Changeable System
Using temperature range -10°C~45°C
Power supplyAC Adaptor 100~240V
SizeFig. 1 27mmφ x 87mm
Weight215g (Including AC Adaptor)
Multi-Functional Adjustable Wall Mount Laser Equipments
It is suitable for marking on the ceiling.It is available to attach to H shape, L shape, C shape steel and bar but only up to
16mm thickness.
Item No.EKM-400
Tripod core diameter5/8 inch
Size136 x 350mm
Elevating range150mm
Weight950g
*with carrying bag
Sliding Stand for Detector Laser Equipments
This is to let a detector for laser stand by itself.Very convenient for marking horizontal line on floor and foradjusting height when
placing machinery.
Item No.DST-150
Sliding height40mm
Height adjustment bolt 40mm
Moving range of height 75~150mm (from floor to fixing bolt of detector.
Actual height will differ in accordance with a fixed detector.)
Size85x55x125mm (Min. Height)
Weight214g
Sustainable Laser Stand Poll Laser Equipments
Available to replace with M6 fixing screw in addition to 5/8 inch tripod fixing screw.
Machine stand can move up and down freely along with pole.Fixing the stand is very easy using one touch lever.
Including level can set the pole in vertical.
Built-in spring will help it stand firmly.
Using included fixing adaptor, it is available to use with Laser Products of other companies.Note: But not available for all the lasers. Please confirm to us for its convertibility before
purchase.
Stand pole of the length from floor to ceiling.Available to emit laser to the desirable height using laser being set on the stand which
move up and down freely.Combination of separate 5 section poles can respond to the height between 75cm and
336cm.
Item No.LSP-336
Fixing screw diameter5/8 inch 6mm
Available range in height 75cm ~ 336 cm
Weight1.7kgs. (including a Level)
Elevator Tripod for Laser Laser Equipments
Elevator tripod for Line Lasers.Available for Line Lasers and for deciding
where to place equipments
Item No.EL-CL
Shape of tripod headFlat 55mmφ
Tripod core diameter5/8 inch
Elevating range300mm
Size Total length 1,735mmShortest length 595mm
Weight1.6kg
*with carrying bag
Elevator Tripod for Laser Laser Equipments
3 directions Stabilizer can be adjusted for opening and closing the tripod by the grip.
Small type elevator tripod for Line Lasers.Available for Line Lasers and for deciding where to place equipments
Item No.EL-CM
Shape of tripod headFlat 55mmφ
Tripod core diameter5/8 inch
Elevating range285mm
Size Total length 1,230mmShortest length 470mm
Weight970g
*with carrying bag
3 m Long Elevator Tripod Laser Equipments
Useful when marking from height place indoorsSuitable for interior construction, setting equipments and
finishing operation.2 steps elevation system enables it to extend max. about
3m.
Extending pole parts have a certain space to protect your fingers when the pole abruptly slide down when unlocked by accident.
3 directions stabilizer have a rock screw and can adjust the tripod condition according to the work place.
Tripod tips are covered by rubber in round shape so that it helps to fix on the floor firmly and give no damage to the floor.On the outside ground, it is fixed by spikes stably.
Item No.EL-CLL
Tripod head shapeFlat 70mmφ
Tripod core diameter5/8 inch
Elevating range The first section 366mmThe second section 415mm (Pipe elevating range)
Size Max. length 3,220mmShortest length 1,095mm
Weight4.8kgs.
3m Long Elevator Tripod Laser Equipments
Maximum height 3m with 2 steps elevating functionsIdeal for working at high place such as wall mounting, and
other finishing constructions using laser tools The chain which prevents a fall
Item No.ELT-CL
Type of HeadFlat
Tripod core diameter5/8 inch
Elevating range First section : 330mmSecond section : 830mm (Pipe elevating range)
Size Max. Ht : 3,100mmMin. Ht : 1,270mm
Weight6.7kg
Elevator Tripod Laser Equipments
Shifting function makes it easy to set marking point.Fixing screw for head is 5/8”With vial
Item No.ELT-SL
Type of HeadFlat/Shifting type
Tripod core diameter5/8 inch
Elevating range240mm
Size Max. Ht : 960mmMin. Ht : 610mm
Weight4.5kg
Measuring Equipment/Checking Equipment
Measuring Equipment
Ultrasonic Distance Measure ODM-160
Ultrasonic Distance Measure with Laser Function Measuring Equipment
Only putting button, it can measure distance, volume and area easily.Built-in automatic temperature compensation makes more precise measurement available.
Can measure momentarily. Only putting bottom.Consecutive measurement is available.Even moving the instrument, it can show
the new distance simultaneously.Distance, Area, Volume and Environment temperature measurement functions.LCD backlight functionEasily measure from 60cm to 16m.
Item No. ODM-160Measurement distance 0.6~16mAccuracy ± (0.5% +1 digit) under the condition of static airMinimum display 0.01m
Display unit Changeable to Metric system and feet/inch.Display LCD display in 2 lines with backlight
Laser Red color semi-conductor laser 670~635nmUnder 1mW JIS Class 2
Power supply9V layered dry battery x 1 pc.With automatic power off function.(Automatically power off after 30 seconds from last operation.)
Using temperature range 0°C~40°C
Temperature compensation Automatic temperature compensation function
Measurement temperature range 0°C~40°C
Additional functionArea and volume measurement and adding functions respectively.Temperature measurement functionMemory function
Addition rangeDistance till 9999.99mArea till 99999.9㎡Volume till 999999㎥
Size/weight 142 x 70 x 40mm / 110g
Checking Equipment
Checking Mirror AC Live Wire Electroscope AC-40
Checking Gadget
Suitable for construction, checking and cleaning of Sewer, etc.
▪Checking Mirror ▪Original Nylon Case ▪Small LED Light ▪AAA size dry battery x 3 pcs. (only for test operation)
Item No. Checking Mirror I type
Checking Mirror II type
Checking Mirror III type
Max. length 115cm 261cm 416cm
Adopted sponge grip.Mitigate fatigue of your hand and reduce slipping.
Using the reflection of small LED light against mirror, light up the object. (Detachable)It is necessary to check in dark environment.As the light is semi-waterproof so that it can be used in watery place.
Min. length 51cm 100cm 118cmSection 3 sections 3 sections 4 sectionsMirror size 87x135mm 152x190mm 152x190mmWeight 490g 840g 980g
Item No. Small LED Light
Power supply AAA size dry battery x 3 pcs.( included batteries are only for test operation.)
Continuous operating time about 18h (when alkaline battery)
Waterproof ○Size 82 x 27mm (excluded grip part)Weight 55g (Including batteries)
AC Live Wire Electroscope (No-contact type) Checking Gadget
Without contact, it can detect live wire. (AC only)Compact size to be able to put in your pocket.
Attached clip will be useful when putting in your pocket.Unlike the other pen types, it does not have any protruding object and a cap so
that its handling is much safer and simpler.
Item No. AC-40Availability 90~250V AC live wire (50~60Hz)
Depth of detection Available wall thickness is about 40mm(Depending on the environment)
Display LED lamp and buzzer soundPower supply AAA size dry battery x 2 pcs.Using temperature -7°C~40°CSize/weight 120x25x15mm / 19g (Excluding batteries.)
Surveying Instruments
1. Auto Level
XG SeriesSTS SeriesSTS-240/280
Auto-Level Surveying Instruments
Sharp shape telescope and compact body.Trustworthy Auto-Level with high waterproofness.
20XG 24XG 26XG
28XG 32XG
PDF Catalogue
※Original color and putting your desired letters on the products are available. In this case, please feel free to contact us about its minimum order quantity, etc.
(e.g.)Auto-Level 28XG in Blue green color.
These instruments conform to IP55 for water and dust proof.It can protect the instrument from dust and rain in work place.
Available to attach to both flat and dome head tripod(Both 5/8 inch screw).
Automatic compensation device of magnet damper system can keep stable accuracy even being used under harsh environment with frequent vibrations.
Minimum focusing distance is only 30cm.Available to work even in narrow space.
▪Instrument ▪Plumb Bob ▪Tool Kit ▪Hard Case ▪Lens Cap ▪Instruction Manual
Item No.20XG 24XG 26XG 28XG 32XG
Standard Deviation (km) ±2.5mm ±2.0mm ±1.5mm ±1.5mm ±1.0mm
Objective aperture30mm 34mm 40mm 40mm 40mm
MagnificationErect 20X Erect 24X Erect 26X Erect 28X Erect 32X
Minimum focusing distance 30cm 30cm 30cm 30cm 30cm
Automatic Compensating
±15' ±15' ±15' ±15' ±15'
Range
Sensitivity for circular type bubble vial
10' / 2mm 10' / 2mm 10' / 2mm 10' / 2mm 10' / 2mm
Weight (unit)1.3kg 1.3kg 1.3kg 1.3kg 1.3kg
Waterproofall equivalent to IP55
ColorGold/Black Gold/White Gold/Black Gold/White Gold/Black
Auto-Level Surveying Instruments
Features high accuracy, wide range of magnification & good stability.Provided with hard case, plumb bob, user's manual, adjust pin & desiccant.
STS-24 STS-32
Conforming to IP54, this instrument can bear working in harsh environment.
Available to attach to both flat and dome head tripod(Both 5/8 inch screw).
Automatic compensation device of magnet damper system can keep stable accuracy even being used under harsh environment with frequent vibrations.
Minimum focusing distance is only 30cm.Available to work even in narrow space.
▪Instrument ▪Plumb Bob ▪Tool Kit ▪Hard Case ▪Lens Cap ▪Instruction Manual
Item No.STS-24 STS-26 STS-28 STS-30 STS-32
Standard Deviation (km) ±2.0mm ±1.5mm ±1.5mm ±1.0mm ±1.0mm
Objective aperture34mm 40mm 40mm 40mm 40mm
MagnificationErect 24X Erect 26X Erect 28X Erect 30X Erect 32X
Minimum focusing distance 30cm 30cm 30cm 30cm 30cm
Automatic Compensating Range
±15' ±15' ±15' ±15' ±15'
Sensitivity for circular type bubble vial
10' / 2mm 10' / 2mm 10' / 2mm 10' / 2mm 10' / 2mm
Weight (unit)1.8kg 1.8kg 1.8kg 1.8kg 1.8kg
Waterproofall equivalent to IP54
ColorOrange/White Orange/White Orange/White Blue/White Blue/White
Auto-Level Surveying Instruments
Sealed-type body, no damage from fluctuation of the weather. With hard case which surely protects your auto-level.
STS-240
PDF Catalogue
Conforming to IP54, this instrument can bear working in harsh environment.
Available to attach to both flat and dome head tripod(Both 5/8 inch screw).
Automatic compensation device of magnet damper system can keep stable accuracy even being used under harsh environment with frequent vibrations.
Minimum focusing distance is only 30cm.Available to work even in narrow space.
▪Instrument ▪Plumb Bob ▪Tool Kit ▪Hard Case ▪Lens Cap ▪Instruction Manual
Item No.STS-240 STS-280
Standard Deviation (km) ±2.0mm ±1.5mm
Objective aperture30mm 40mm
MagnificationErect 24X Erect 28X
Minimum focusing distance 30cm 30cm
Automatic Compensating Range
±15' ±15'
Sensitivity for circular type bubble vial
10' / 2mm 10' / 2mm
Weight (unit)1.3kg 1.3kg
Waterproofall equivalent to IP54
ColorWhite White
2. ElectronicTheodolite SDT10WS
Electronic Theodolite Surveying Instruments
Angle measurement accuracy 5" LCD in 2 sides.Simple operation and high performance
PDF Catalogue
※Original color and putting your desired letters on the products are available. In this case, please feel free to contact us about its minimum order quantity, etc.
(e.g.)Electronic Theodolite, SDT-10WS in Blue green Color.
Magnification 30XMinimum display angle
Minimum display unit of angle is changeable to 10"or 5".Digital wide LCD
2 lines and 8 digits with built-in illumination device.While LCD is illuminated, the cross line in the telescope is also lightedso that it is helpful to work in the dark condition.
Various angle display is available.e.g. 0°against ceiling, Horizon 0° & Horizon 0° ±90°And also % slope display is available.
Easy to switch to left or right rotation in horizon.Only touch on R/L keys.
Automatic power-off systemIf the power has been on for a certain time, it will be off automatically and save the battery life. In addition to this function, you can choose the time to be off automatically at 20 min. or 30 min.
Shifting type tribrachEasy to set up
▪Instrument ▪Plumb Bob ▪Protection Cover of Instrument ▪Tool Kit▪AA size alkaline dry battery x 4 pcs. ▪Hard Case ▪Lens Cap ■Instruction Manual
(Do not include in the basic set)
■Diagonal Eye Piece (DE-70)
Item No.SDT10WS
Telescope
Length156mm
Objective aperture45mm
Magnification30X
ImageErect
Resolving power3.5"
Filed of view1°30' (26m /1000m)
Minimum focusing distance 1.3m
Cross line illuminating device Available
Stadia ratio100
Stadia constant0
Angle measurement
Measuring MethodIncremental encoder
Minimum reading10" / 5" (selectable)
Accuracy 5" (Equivalent to JIS B7909 1998 )Angle measurement mode
HorizontalRight/Left(selectable)
Plumb-bob Vertical0° against ceiling / horizontal 0° / horizontal ±90° (selectable)
Power supply
Power supplyAA size alkaline dry cell battery x 4 pcs.
Battery lifeApprox. 12 hours of continuous use (Using alkaline battery)
Others
Display 2 LCDs (for front & rear)2 lines/8 digitswith illuminating device
Automatic power-off function
SelectableAlternative for with or without this function.(If with this function, there are two choices:power-off after 20 minutes or 30 minutes after the last operation.)
Sensitivity for bubble vial
Stick type60"/2mm
Circular type10'/2mm
Telescope
ImageErect
Magnification4X
Min. focusing distance 0.5m
TribrachShifting type
Water and dust proof Equivalent to IP54
Working temperature range -20°C~+50°C
Height232mm
Size/weight195mm x 145mm x 350mm / 4.6kg
UAVER : Carbon-Based Technology, Inc. was established in March 2007 and devoted in complete system design, integration, manufacturing, and global marketing of Unmanned Aircraft System. We not only can offer high reliability Unmanned System as a platform for “Intelligence Gathering”, but also can offer total solutions for various aspects. Through this Hi-tech and Hi-reliability UAS platform which is 100% researched & developed in-house, it can integrate with techniques of data processing and analyzing for relative study fields such as GIS and Remote Sensing,
Team Carbon-based can offer our clients with totally intact and useful intelligence on the ground as well as in the air.
UAVs Product details
Swallow-P Aerial MappingAvian-P Aerial Mapping
a) Swallow-P Aerial Mapping
Product Description
Swallow unmanned aerial mapping system featuring light weight, portable, and easy operation advantages. Any
individual with less or even no aviation experience can easily accomplish an aerial mapping mission.
Specification Features
Features
Easy handling
The system consists of 3 main components, i.e. ground control station (GCS), unmanned aerial vehicle (UAV) and launch system. The whole system can be setup in 10 minutes.
Light & Portable
The system is packed in a hard case and can be easily transported with a sedan.
Simple Structure
3 servos are the only mechanical part of the system, maintenance work is minimal.
Case Study
University Campus SurveyCamera : Canon S100Average Height : 545mNumber of Images : 114Area : 3.05 km²Ground Sample Distance : 17.55 cm
b) Avian-P Aerial Mapping
Product Description
Avian-P unmanned aerial mapping systems featuring long endurance, hi-stability, easy operation, and multi-payloads
advantages. Any individual with less or even no aviation experience can easily accomplish and aerial mapping
mission.
Specification Features
Features
Flight Performance
The aircraft configuration of Avian UAV allows a more stable quality flight throughout the mission, resisting a more
turbulent working environment. The low cruising speed of Avian contributing to the better aerial photographs.
Reliable Platform
Avian UAV has been operated since 2008, with more than 1200 flight hours. It is proven in rough terrain and tough
environment.
High Durability
High strength carbon composite airframe and parachute system allows Avian UAV to land on hard surface,
decreasing the limitation for searching the launch and recovery site.
Advanced Payload
Avian UAV is capable to carry the DSLR-like digital camera. High resolution of the aerial photograph can have the
GSD up to 5cm, while flying at a higher altitude. Moreover, payload of the Avian UAV is customizable.
Case Study
Farm
Camera : Panasonic FT2
Average Height : 230 m
Number of Images : 542
Area : 3.80 km2
Ground Sample Distance : 6.76 cm
YUTUNG : Yutung industrial is a promising enterprise integrating almost all kinds of marine fender(rubber fender) resources in China. Our pneumatic rubber fender, yokohama fender, boat fender, foam filled fender and ship airbag are widely used in small, big or huge shipside, ocean platform, harbor and shipyard. Our dock fender(dock bumper) series are the necessary bump absorption equipment used in port construction and ship manufacturing industry; it has the advantage of lower reaction force, high energy absorption, with sea water anti-erosion performance and easy repair and maintenance function.
Floating Fender Rubber Balloon for Launching Dock Fender Dock & Ship Hardwares Product details Product details Product details Product details
Pneumatic Fender Air Bag for Shipping Square Fender Fender Panels STS Fender Cell Rubber Fender D Rubber Fender Mooring Anchor Arch Fender W Fender Fair LeadPotoon Fender Cone Fender SwivelPort Fender Cylinderical Rubber Fender Marine Rope Pneumatic Wheel Fender BollardFender for Boats Fender Cell
Fender Suppliers Foam Filled FenderFoam Filled FenderShip Side Foam Filled Fender
1. Floating Fender i. Pneumatic Fender
a) Pneumatic Fender
Pneumatic fenders, it is a kind of marine fender, for the tire and chain net type we also called them yokohamarubber fender, is a keen anti-collision device for marine application in the world today. This compressed air rubber fender is used as a protective medium. Therefore, pneumatic rubber fenders serves as a protective medium against collision when ship-to-ship contact (STS) application and ship-to-berthing (STB) application. Pneumatic fenders has the advantages of massive energy absorption with low unit surface pressure acted upon the ship. So pneumatic fenders has become an ideal ship protection medium used extensively by large tankers, LPG vessels, ocean platforms, large docks, harbor and wharves etc.
Application
Pneumatic yokohama rubber fenders are suitable for many applications including:
Tankers, gas carriers and bulk cargo ships; Fast ferries and aluminum hulled vessels; Temporary of permanent installations; Rapid response and emergency fendering; As stand-off fenders to realign ships with shore facilities.
b) STS Fender:
STS fender,a kind of marine fender, also called yokohama pneumatic fender, are a leading anti-collision device
for marine application in the world today. This compressed air rubber fender is used as a protective medium.
Therefore, STS fender serves as a protective medium against collision when ship-to-ship contact (STS fender
application) and ship-to-berthing (STB fender application). Yokohama pneumatic fenders have the advantages of
massive energy absorption with low unit surface pressure acted upon the ship. So yokohama rubber fenders have
become an ideal ship protection medium used extensively by large tankers, LPG vessels, ocean platforms, large
docks, harbor and wharfs.
c) Potoon Fender :
Potoon fender, is designed and manufactured for pontoons or Jettys. You can use this fender system for your jetty or pontoon. Potoonfender – Professional Jetty Fender System or Pontoon Fender System –Protect your boat with our potoon fender.
d) Port Fenders :
These port fenders- pneumatic port fenders style have the followings feature: 1. High energy absorption and low reaction force and surface pressure.2. No decline in the rate of energy absorption when obliquely compressed, under normal circumstances, and uniform surface pressure for any contact area.3. Low reaction force of the port fenders to prevent damage from repeated impacts against the hull of a ship, quay, jetty or a mooring rope.4. Ability to float and thus rise and fall with the ebb and floe of tides and the deterioration of the rubber.5. High standard of uniform quality in compression performance with no deterioration of the rubber.6. These port fenders are easy for installation.
e) Fender for boat:
This fender for boat- pneumatic fender for boat style has the followings feature:
1. High energy absorption and low reaction force and surface pressure.2. No decline in the rate of energy absorption when obliquely compressed, under normal circumstances, and uniform surface pressure for any contact area.3. Low reaction force of the fenders for boat to prevent damage from repeated impacts against the hull of a ship, quay, jetty or a mooring rope.4. Ability to float and thus rise and fall with the ebb and floe of tides and the deterioration of the rubber.5. High standard of uniform quality in compression performance with no deterioration of the rubber.6. This fender for boat are easy for installation
f) Fender Suppliers:
Yutung industrial is one of promising fender suppliers integrating almost all kinds of marine fender resources in China. The company can provide clients' total solution and door to door service. Our pneumatic rubber fender, foam filled fender and ship launching air balloon are widely used in small, big or huge shipside, ocean platform, harbor and shipyard. Our factory is the head manufacturer in this line, and the manufacturing experience has been more than twenty years, it is almost the biggest one in China. We, one of the best fender supplies in China, have our own quality criterion which is over the national standard and international standard ISO17357, also our products have been approved by CCS.
g) Pneumatic wheel fender:
Yutung industrial is a promising pneumatic wheel fender distributor integrating almost all kinds of marine fender resources in China. The company can provide clients' total solution and door to door service. Our pneumatic rubber fender, foam filled fender and ship launching air balloon are widely used in small, big or huge shipside, ocean platform, harbor and shipyard. Our factory is the head manufacturer in this line, and the manufacturing experience has been more than twenty years, it is almost the biggest one in China. We, one of the best fender distributor in China, have our own quality criterion which is over the national standard and international standard ISO17357, also our products have been approved by CCS.
ii. Foam Filled Fender
a) Foam Filled Fender
Foam filled fender caters for any ships. Foam fenders, boat fender are constructed with a central steel through-pipe with polyurethane, polyethylene or plastic foam core forming the resilient part of the fender. The anti-resistant skin is formed using high tensile reinforced polyethylene polyurea elastomer (SPUA). Transition layer are also be used to enhance the adhesiveness between every kinds material. Tire and chain nets are optional.
This combination of materials enables extremely high compressive stresses to be absorbed, coupled with low reaction forces.Fenders are unsinkable. In the event of rupture of the outer skin, the closed cell property of the Baltic memory flexible foam seals off water ingress. The outer skin of the foam filled fender can be repaired quickly and economically. The foam filled fenders are lightweight with high reserve buoyancy and always maintain the correct level in varying tidal waters. Suitable for dock protection, all ship-shore operations and for ship-to-ship protection at sea. Yutung can advise one type of fender on receipt of specific details of operation.
Polyurethane elastomer
It's a new kind of polymer synthetic material between rubber and plastic, with both high strength of plastic and long range elasticity of rubber.1. High wear resistance. 3-5 times that of natural rubber.2. High oil resistance, 4 times that of NBR--Nitrile butadiene rubber.3. High mechanical strength. Its tensile stress at break, tear strength and load bearing ability are many times higher than those of common rubber. 4. Excellent resistance to acid, alkali, low temperature and solvent.5. High metal-bonding strength.6. Wide hardness range. It can be adjusted within elastic domain Shore A 10 - Shore A 100.
b) Ship Side Foam Filled Fender :
1. Size could be OEM.
2. Fender shape could OEM by the ship size.3. Compared with D rubber fender,the foam fender is light to suit the low weight requirement.4. High density 120-140kgs/m3 inside, with SPUA coating outside.5. Different color upon request.
2. Rubber Balloon For Launching
a) Air Bag for shipping a.1 Marine Airbag
Marine airbag, also called air lifting bag, air balloon, inflatable bags, roller bags, air lift bags, salvage bags.
Yutung's factory is the inventor of first marine airbag, and sets the standard in the industry for high performance and usage technology. Now, marine airbag (Intense pneumatic tire) are widely used in ship launching and landing, sunken ships salvage and refloatation, heavy lifting and conveying. Ship launching or upgrading depending on marine airbag is an innovative technology having utmost bright prospect in shipbuilding. Now the Flexible Launching Technology is full of mobility, with advantages such as saving effort, saving time, saving work load, saving investment, flexible, safe, reliable, and outstanding benefit, etc. The technology of apply air gasbag to the launching and landing of ships overcomes the restrictions of traditional slide board technology which is commonly used in building small or medium size ships. After years of practice and accumulation of experience, we have developed this technology from facilitating the launching of only 1,000 DWT ships to current 55,000 DWT ships. And now this technology has become into a flexible, promising, secure and mature technology. Besides that, these airbags are widely used in upgrading of ships and boats of all sizes.
a.2 Lifting Bag
Ship launching or upgrading relying on air-bags is an innovative technology having promising prospect in shipbuilding. It overcomes the shortcomings of the fixed launching track, which limits the productive capability of the small and medium sized shipyards. Now it has become a Flexible Launching Technology, having the merits of time and labor saving, flexibility, reliability and safety in operation and comprehensive economic benefits etc.The air bag consists of an air bag’s body and ends of iron pieces. The wall of air bag consists of rubber layer and curtain cloth layer after the process of forming and vulcanization. At both ends of the air bag, there are two air bag mouths through which air can be pumped into or released from the air bag. The air bag mouths are made of metal
materials and are closely combined with the body of the air bag into one.
Model Specification(D×L) Application
3-layer
Diameter(D):0.8m, 1.0m, 1.2m, 1.5m, 1.8m etc.
Length(L):
ranging from 5m to 18m(according to the requirements of
customers)
For Small and medium-sized ship up to or down to launching way and moving objects
4-layer For the larger ship up to or down to launching way and moving objects
5-layer For large and medium-sized ship up to or down to launching way and moving objects
6-layer or more For large ship up to or down to launching way and supporting the key parts during operation
a.3 Ship Airbag: Yutung’s factory is the inventor of first ship airbag, and sets the standard in the industry for high performance and usage technology. Now,ship airbag(Intense pneumatic tire, air lift air bag) are widely used in ship launching and landing, sunken ships salvage and refloatation, heavy lifting and conveying. Ship launching or upgrading depending on ship airbag is an innovative technology having utmost bright prospect in shipbuilding. Now the Flexible Launching Technology is full of mobility, with advantages such as saving effort, saving time, saving work load, saving investment, flexible, safe, reliable, and outstanding benefit, etc. The technology of apply air gasbag to the launching and landing of ships overcomes the restrictions of traditional slide board technology which is commonly used in building small or medium size ships. After years of practice and accumulation of experience, we have developed this technology from facilitating the launching of only 1,000DWT ships to current 55,000 DWT ships. And now this technology has become into a flexible, promising, secure and mature technology. Besides that, this ship airbag is widely used in upgrading of ships and boats of all sizes.
There’re two kinds of synthetic-tire-cord because of the different performance. Item Unit 1400 dtex/2 1870 dtex/2Break Strength N/ strand over 215.6 over 284.2Diameter mm 0.65 +/- 0.05 0.74 +/- 0,05Adhesion Strength N/cm over 137.2 less 156.8
a.4 Marine Rubber Airbag
Construction Features:Launching / Landing Airbags(marine rubber airbag), basic body consists of rubber layers, synthetic-cord-reinforced
rubber layers, are kind of a cylindrical rubber airbags with hemispherical heads at the both ends. All of these are
vulcanized together, and then compress air inside to enable into roll.
1. Outer RubberThe outer rubber layer of the marine rubber airbag that covers the outside of launching airbags protects the cord
layers from abrasion and other external forces. This compound has sufficient tensile and tear strength to withstand
any weather condition and hard usage. Standard color is black.
2. Synthetic - tire - cord layer for reinforcementThe reinforcement cord layers of the marine rubber airbag, which are made of Synthetic-tire-cord commonly used in
tires, are arranged at ideal angles to hold the internal pressure and to distribute the stress evenly providing strong
efficient reinforcement.
3. End FittingsEnd fittings of the air bags include air tightness swivel and airbags safety air inlet.
Launch bag(Lift air bags)
1. The standard specification of lift air bags(launch bag).You can choose the required diameter and effective length to meet your projects.1) Diameter (D) : It is from 0.8m to 2.0m.2) Effective Length (EL): It is from 6m to 18m .3) Total Length (TL): It is from 7m to 19.5mThe above specification only is our standard specification arrange. Other specification also can be supplied upon clients’ request. 2. The standard number of launch bag layersWe define the number of layer, which means the number of Synthetic - tire - cord layer, in order to confirm the Safety Working Pressure. Normally, our launch bag(lift air bags) include 4, 5, 6, 7, 8 layers types. Other type is available upon clients’ request. 3. The material of launch bagThere’re two kinds of synthetic-tire-cord because of the different performance. Item Unit 1400 dtex/2 1870 dtex/2Break Strength N/ strand over 215.6 over 284.2Diameter mm 0.65 +/- 0.05 0.74 +/- 0,05Adhesion Strength N/cm over 137.2 less 156.8
3. Dock Fender
a) Square Fenders
Feature of square fenders
The kind of square fenders are applicable for various docks, quays and ships.
Specification
Type of Square Fenders
Specification
of Square fenders(mm)
Square Fenders Performance L=1000
B Φ L
Rated
Deflection(%)
High Reaction
Force C0
Standard Type Ro
Tolerance%
Reaction Force
Energy
Absorption
Reaction Force
Energy
Absorption
150×75 150 75
500~2500
40
781.0 16.0 648.0 13.0
±10
200×100 200
100 1059.0 27.4 876.0 22.0
250×125 250
125 1320.0 43.2 1094.0 35.0
300×150 300
150 1581.0 62.1 1308.9 51.0
400×200 400
200 2101.0 109.5 1739.0 90.0
500×250 500
250 2621.8 169.5 2170.4 139.3
B) Cell Rubber Fender
Feature of cell rubber fender:1.Reasonable structure, high performance and good durability.2.With angular, and little influence of anchoring.3.Usually suitable for large and middle oil, coal, ore docks.
Specification of cell rubber fender:
Type of Cell Rubber
Fender
Size of Cell Rubber Fender
H D1 D2 Holes(n) d h
SC400 400 550 650 4 Φ30 25SC500 500 550 650 4 Φ32 25SC630 630 700 840 4 Φ39 25SC800 800 900 1050 6 Φ40 30SC1000 1000 1100 1300 6 Φ47 35SC1150 1150 1300 1500 6 Φ50 37SC1250 1250 1450 1650 6 Φ53 40SC1450 1450 1650 1850 6 Φ61 42SC1600 1600 1800 2000 8 Φ61 45SC1700 1700 1900 2100 8 Φ66 50SC2000 2000 2000 2200 8 Φ74 50SC2250 2250 2300 2550 10 Φ74 57SC2500 2500 2700 2950 10 Φ74 70
SC3000 3000 3150 3350 12 Φ90 75
C) Arch Fender
Arch Fender Feature
1. High energy absorption and low reaction force.2. Reasonable Structure and long useful life.3. Arch fender can be installed firmly and replaced easily.
Arch Fender Specification
Type of Arch Fender Specification of Arch Fender
H L L1 B B1 B2 c d e f h n×Q sSA300×1000 300 1000 1150 225 600 490 140 37 105 140 45 1×870 195SA300×1500 300 1500 1650 225 600 490 140 35 105 140 33 2×685 195SA300×2000 300 2000 2150 225 600 490 137.5 35 105 140 33 3×625 195SA400×2500 300 2500 2650 225 600 490 140 35 105 140 33 3×790 195SA400×3000 300 3000 3150 225 600 490 145 35 105 140 33 4×715 195SA400×1000 400 1000 1200 300 800 670 150 41 120 165 40 1×900 260SA500×1500 400 1500 1700 300 800 670 150 41 120 165 40 2×700 260SA500×2000 400 2000 2200 300 800 670 147.5 41 120 165 40 3×635 260SA500×2500 400 2500 2700 300 800 670 150 41 120 165 40 3×800 260SA600×3000 400 3000 3200 300 800 670 150 41 120 165 40 4×725 260SA600×1000 500 1000 1250 375 1000 840 160 47 140 180 45 1×930 325SA600×1500 500 1500 1750 375 1000 840 160 47 140 180 45 2×715 325SA800×2000 500 2000 2250 375 1000 840 157.5 47 140 180 45 3×645 325SA800×2500 500 2500 2750 375 1000 840 160 47 140 180 45 3×810 325SA500×3000 500 3000 3250 375 1000 840 165 47 140 180 45 4×730 325SA600×1000 600 1000 1300 450 1200 1010 170 50 160 195 54 1×960 390SA600×1500 600 1500 1800 450 1200 1010 170 50 160 195 54 2×730 390
SA600×2000 600 2000 2300 450 1200 1010 167.5 50 160 195 54 3×655 390SA600×2500 600 2500 2800 450 1200 1010 170 50 160 195 54 3×820 390SA600×3000 600 3000 330 450 1200 1010 170 50 160 195 54 4×740 390SA800×1000 800 1000 1400 600 1600 1340 180 68 260 270 72 1×1040 520SA800×1500 800 1500 1900 600 1600 1340 180 68 260 270 72 2×770 520SA800×2000 800 2000 2400 600 1600 1340 180 68 260 270 72 3×680 520SA800×2500 800 2500 2900 600 1600 1340 182.5 68 260 270 72 3×845 520
SA1000×1000 1000 1000 1500 750 2000 1680 200 68 300 290 90 1×1100 650SA1000×1500 1000 1500 2000 750 2000 1680 200 68 300 290 90 2×800 650SA1000×2000 1000 2000 2500 750 2000 1680 200 68 300 290 90 3×700 650
Arch fender performance curve
SA300×1000
Comp.\Per.\DeflectionDesign Compressive Deflection 50%
Reaction Force(KN) Energy Absorption(KJ) ToleranceStandard 206 26 ±10%
SA500×1000
Comp.\Per.\DeflectionDesign Compressive Deflection 50%
Reaction Force(KN) Energy Absorption(KJ) ToleranceStandard 344 72 ±10%
SA600×1000
Comp.\Per.\DeflectionDesign Compressive Deflection 50%
Reaction Force(KN) Energy Absorption(KJ) ToleranceStandard 412 104 ±10%
SA-800×1000
Comp.\Per.\DeflectionDesign Compressive Deflection 50%
Reaction Force(KN) Energy Absorption(KJ) Tolerance
Standard 550 185 ±10%
D) D Rubber Fender
Feature:
1. With reasonable reaction it may absorb more energy than of cylindric type.2. Convenient in installing.3. D rubber fender is usually used for docks of frame work type and ships due to the small size of its bottom width.
Specification of D rubber fender :
Type of D rubber Fender
Specification of D Rubber FenderNoteH B L
Holes Q C h D d
D200×200×850 200 200 850 3 325 100 40 60 25 D rubber fenders of other specifications and sizes can be discussed with customers
D200×200×900 200 200 900 2 600 150 40 60 25 D200×200×1000 200 200 1000 2 600 200 40 60 25 D200×200×1500 200 200 1500 3 600 150 40 60 25 D200×200×2000 200 200 2000 4 500 250 40 60 25 D300×300×850 300 300 850 3 325 100 40 65 32
D300×300×900 300 300 900 2 600 150 40 65 32 D300×300×1000 300 300 1000 3 350 150 40 65 32 D300×300×1500 300 300 1500 4 400 150 40 65 32 D300×300×2000 300 300 2000 4 500 250 40 65 32 D300×360×850 300 360 850 3 325 100 40 65 32 D300×360×1000 300 360 1000 3 350 150 40 65 32 D300×360×1500 300 360 1500 4 400 150 40 65 32 D400×400×850 400 400 850 3 325 100 55 65 32 D400×400×1000 400 400 1000 3 350 150 55 65 32 D400×400×1500 400 400 1500 3 600 150 55 65 32 D400×400×1500 400 400 1500 4 400 150 55 65 32 D500×500×850 500 500 850 3 325 100 90 97 45 D500×500×1000 500 500 1000 3 350 150 90 97 45 D500×500×1500 500 500 1500 3 600 150 90 97 45 D500×500×1500 500 500 1500 4 400 150 90 97 45
Performance:
Type of D Rubber Fender
Performance of D Rubber FenderDesign Compressive
Deflection(%)
Reaction Force(KN)
Energy Absorption (KJ) Tolerance%
D200×200×850
50
176.2 7.1
±10
D200×200×900 186.6 7.6 D200×200×1000 207.3 8.4 D200×200×1500 310.9 12.6 D200×200×2000 414.5 16.8 D300×300×850 255.0 10.0 D300×300×900 270.0 10.6 D300×300×1000 294.3 11.8 D300×300×1500 441.5 16.7 D300×300×2000 588.6 23.6 D300×360×850 280.5 11.5 D300×360×1000 323.7 13.1 D300×360×1500 480.7 19.6 D400×400×850 325.2 16.7 D400×400×1000 382.6 19.6 D400×400×1500 573.9 29.4 D500×500×850 383.6 26.7 D500×500×1000 451.3 31.4 D500×500×1500 686.7 47.1 D500×500×2000 902.6 62.8
Performance Curve : D300×300×1500L
Rubbercomp\Per.\Deflection Design Compressive Deflection 50%Reaction(KN) Absorption(KJ) Tolerance
Standard Type 441.5 16.7 ±10%
D500×500×1500L
Rubbercomp\Per.\Deflection
Design Compressive Deflection 50%Reaction(KN) Absorption(KJ) Tolerance
Standard Type 686.7 47.1 ±10%
E) W Fenders
Feature of w fenders:
1. High energy absorption, low reaction force;2. W fender is easy to be installed and maintained.
Specification of W fenders
Type of W Fenders W Fenders Size(mm)
B B1 H LW300 480 426 300 300-2000W330 550 420 330 300-2000W450 500 420 450 300-2000
Type of W Fenders W Fenders Size(mm)
B B1 H LW300 600 546 300 300-2000W400 600 550 400 300-2000
F) Cone Fender
Characteristics of the cone fender
Our cone fender adopts cone rubber and full-new structure design of proposed steel structure, it is one of most excellent performance fender in that designed compress deformation rise from 52.5% to 70% if reaction force do not increase. Cone fender's emergence simplifies wharf structure and reduces the cost of quay wall construction, hence cone fender is an ideal substitute of cell type rubber fender.
As a kind of over 10 year aged products, the cone type rubber fender(cone fender) is becoming a trend of quay design, and becoming a new level for quay wall fender design.
1. The energy absorption doubles comparing with the super cell rubber fender with same spec.2. In the case with similar reaction force and energy absorption, small size cone fender can substitute relative large supper cell type fender, i.e., 800H cone fender can substitute 1000H super cell fender, which can reduce the cost of quay wall construction.3. In the case of oblique berthing (less than a angle of 10°),the performance can not be reduced, which is preferred to cone fender model.4. The frontal frame (steel frame) are installed in front of cone fender, which can reduce the surface pressure against vessel hull. The surface of cone fender can be limited below 25t/m2, which is suitable to large vessel especially.5. The super high density polyethylene pads are adhered to the frontal frame, which can reduce the friction factor between hull and fender to below 0.2, and can reduce the shear (horizontal force) exerted cone fender when vessel berth, which can prolong the service life of fenders.6. The frontal frame adopts water-tight structure with high strength and better anti-rust performance.7. The rubber cone fender is rarely damaged or impaired, because it never contacts the hull directly.
G) Cylindrical Rubber Fenders
Feature of cylindrical rubber fenders:1. Low reaction force, less surface pressure, reasonable energy absorption.2. The simple figure of the cylindrical rubber fenders are easy to be installed and maintained.3. Widely used in shipping and docks.4. Good adaptability for transversal and longitudinal shape during berthing.5. Used as the suspending equipment of defending dash for all kinds of the shipping and docks. Specification of cylindrical rubber fenders
Type of Cylindrical
Rubber
Outer Dia(D)
Inner Dia(D)
Length of Cylindrical
Rubber Fender
Note
Fenders sCY150×L 150 75
500-30000
Cylindrical rubber
fenders of other
sizes can be manufacture
d upon users' requests.
CY200×L 200 100
CY250×L 250 125
CY300×L 300 150
CY400×L 400 200
CY500×L 500 250
CY600×L 600 300
CY700×L 700 350
CY800×L 800 400
CY900×L 900 450
CY1000×L 1000 500
CY1100×L 1100 550
CY1200×L 1200 600
CY1300×L 1300 650
CY1400×L 1400 700
CY1500×L 1500 750
CY1600×L 1600 800
H) Fender Cell
Feature of fender cell
1.Reasonable structure, high performance and good durability.2.With angular, and little influence of anchoring.3.Usually suitable for large and middle oil, coal, ore docks.
Specification of fender cell
Type of Fender
Cell
Size of Fender Cell
H D1 D2 Holes(n) d h
SC400 400 550 650 4 Φ30 25SC500 500 550 650 4 Φ32 25SC630 630 700 840 4 Φ39 25SC800 800 900 1050 6 Φ40 30SC1000 1000 1100 1300 6 Φ47 35SC1150 1150 1300 1500 6 Φ50 37SC1250 1250 1450 1650 6 Φ53 40SC1450 1450 1650 1850 6 Φ61 42SC1600 1600 1800 2000 8 Φ61 45SC1700 1700 1900 2100 8 Φ66 50SC2000 2000 2000 2200 8 Φ74 50SC2250 2250 2300 2550 10 Φ74 57SC2500 2500 2700 2950 10 Φ74 70SC3000 3000 3150 3350 12 Φ90 75
Dock And Ship Hardware:
a) Fender Panels
Fender Panels
Fender panels are used in port and dock with the properties of light weight, impact resistance, abrasion resistance, corrosion resistance, anti-ultraviolet radiation, aging assistance, low friction coefficient, energy absorption etc. It can effectively prevent boat and dock from ultraviolet radiation irradiation and boat impact.
Dimension of our fender panels mould: 1020 X 4100 X (5~70)mm, 1260 X 2050 X (5~110)mm, 3720 X 1240 X (5~70)mm.
We can produce the color and dimension of the fender panels according to the requirement and drawing of customer.
b) Mooring Anchor
For mooring of fish farms and other aquaculture installations we supply simple mooring anchor that combine good holding Power and economic price.
C) Fairlead
A fairlead is a device to guide a line, rope or cable around an object, out of the way or to stop it from moving laterally.
D) Swivel
Swivel for marine use.
E) Marine Rope
Features
Marine rope has serial products including varieties of polyamide staple yarn(thread), polypropylene filament(thread), polypropylene, polyester, polypropylene/polyester blend etc. Imported Japanese technology in the eighties last century and as the first set of BX - 1308 - ply braider, it started a new epoch of rope and cable industry in the country and the marine rope has advantages of reasonable braided structure, scientific technology, high strength, low elongation, wearing resistance, anti-corrosion and simple operation. The marine rope is particularly suitable to make large-scale roes and cables as well as anti-static ropes therefore they are welcomed by broad customers.
Application
Marine rope are mainly used in fields of shipbuilding, ocean transportation, national defense and military industry, sea petroleum and harbor operation etc.
F) Bollard
Bollard used in dock and port
Lab Equipments
2. Digital Storage Oscilloscope
3. Collimator System
4. EDM
5. Cube Testing Machine
6. Rebound Proseq Hammer
7. Prismatic Compass
8. Telescopic Alidade
9. Cube Mould
10. Slump Cone
11. Surveyor Chains
12. Ranging Rods
13. Survey Umbrella