Gold
-
Upload
christian-smart -
Category
Business
-
view
1.464 -
download
0
description
Transcript of Gold
![Page 1: Gold](https://reader035.fdocuments.in/reader035/viewer/2022062220/555ae0e6d8b42a024a8b542b/html5/thumbnails/1.jpg)
![Page 2: Gold](https://reader035.fdocuments.in/reader035/viewer/2022062220/555ae0e6d8b42a024a8b542b/html5/thumbnails/2.jpg)
INTRODUCTIONINTRODUCTION INTRODUCTIONINTRODUCTION
![Page 3: Gold](https://reader035.fdocuments.in/reader035/viewer/2022062220/555ae0e6d8b42a024a8b542b/html5/thumbnails/3.jpg)
Since antiquity, pure gold has been a
metal of special intrinsic and practical
value. From the dawn of civilization until
the present time, man has utilized gold in
some form or other in the practice of
dentistry.
![Page 4: Gold](https://reader035.fdocuments.in/reader035/viewer/2022062220/555ae0e6d8b42a024a8b542b/html5/thumbnails/4.jpg)
In its pure form, gold has the unusual
ability to cohere to it self at room
temperature. Gold is quite soft, and in a
compressible form, increments can be
welded by pressure into a solid metal
mass.
![Page 5: Gold](https://reader035.fdocuments.in/reader035/viewer/2022062220/555ae0e6d8b42a024a8b542b/html5/thumbnails/5.jpg)
Another unique feature about gold is it
inertness. Under most conditions it does
not tarnish, corrode or stain.
![Page 6: Gold](https://reader035.fdocuments.in/reader035/viewer/2022062220/555ae0e6d8b42a024a8b542b/html5/thumbnails/6.jpg)
Its chief disadvantages are its color, high
thermal conductivity(53.20), and technical
difficulties in forming a dense restoration.
It has one of the highest densities of all
elements (19.3 g/cm3)
![Page 7: Gold](https://reader035.fdocuments.in/reader035/viewer/2022062220/555ae0e6d8b42a024a8b542b/html5/thumbnails/7.jpg)
Indications;Indications;
Incipient carious lesions
Class I and pits
Class V
Class III
Erosions
Repair of defective cast margins
![Page 8: Gold](https://reader035.fdocuments.in/reader035/viewer/2022062220/555ae0e6d8b42a024a8b542b/html5/thumbnails/8.jpg)
Advantages: Advantages:
No tarnish and corrosion
Insoluble in oral cavity
Good adaptation to cavity walls
High wear resistance
![Page 9: Gold](https://reader035.fdocuments.in/reader035/viewer/2022062220/555ae0e6d8b42a024a8b542b/html5/thumbnails/9.jpg)
DisadvantagesDisadvantages
Colour
Manipulation
Thermal conductivity
![Page 10: Gold](https://reader035.fdocuments.in/reader035/viewer/2022062220/555ae0e6d8b42a024a8b542b/html5/thumbnails/10.jpg)
![Page 11: Gold](https://reader035.fdocuments.in/reader035/viewer/2022062220/555ae0e6d8b42a024a8b542b/html5/thumbnails/11.jpg)
They are Classified into three categories:
I. Foil
A. Sheet
1. Cohesive
2. Noncohesive
B. Ropes
C. Cylinders
D. Laminated foil
E. Platinized foil
![Page 12: Gold](https://reader035.fdocuments.in/reader035/viewer/2022062220/555ae0e6d8b42a024a8b542b/html5/thumbnails/12.jpg)
II. Electrolytic precipitate
A. Mat gold
B. Mat foil (mat gold plus gold foil)
C. Gold – calcium alloy
![Page 13: Gold](https://reader035.fdocuments.in/reader035/viewer/2022062220/555ae0e6d8b42a024a8b542b/html5/thumbnails/13.jpg)
III Powdered gold (encapsulated gold
powder)
![Page 14: Gold](https://reader035.fdocuments.in/reader035/viewer/2022062220/555ae0e6d8b42a024a8b542b/html5/thumbnails/14.jpg)
Gold Foil ( Robert Woffendale 1795)
Oldest of all products standard No. 4 Gold foil
4 x 4 inch sheets weight 4 grains (0.259g) and
0.51m thick
No. 3 weight 3 grains – 3 m thick.
![Page 15: Gold](https://reader035.fdocuments.in/reader035/viewer/2022062220/555ae0e6d8b42a024a8b542b/html5/thumbnails/15.jpg)
Cohesive -
Noncohesive Gold:
Gold attracts gases and any adsorbed gas
film prevents intimate atomic contact
required for cold welding
- Manufactures supply free of surface
contaminants i.e. inherently cohesive.
COHESIVE FOIL
![Page 16: Gold](https://reader035.fdocuments.in/reader035/viewer/2022062220/555ae0e6d8b42a024a8b542b/html5/thumbnails/16.jpg)
NON COHESIVE FOIL:
Majority are provided with an adsorbed
protective gas film like ammonia
-
Prevents premature cohesion of sheets
that may come into contact. Volatile film
is removed by heating to restore the
cohesive character of the foil.
![Page 17: Gold](https://reader035.fdocuments.in/reader035/viewer/2022062220/555ae0e6d8b42a024a8b542b/html5/thumbnails/17.jpg)
Gold Foil Cylinders:
Formed by rolling cut segments of
No. 4 foils into a desired width
- 3.2mm, 4.8mm, 6.4mm using modified
No.22 tapestry needle.
![Page 18: Gold](https://reader035.fdocuments.in/reader035/viewer/2022062220/555ae0e6d8b42a024a8b542b/html5/thumbnails/18.jpg)
Preformed Gold Foils:
Cylinders and ropes are now
available in preformed shapes made
from No.4 foil which has been
‘carbonised’ or corrugated
• Historical interest Great Chicago fire of
1871
![Page 19: Gold](https://reader035.fdocuments.in/reader035/viewer/2022062220/555ae0e6d8b42a024a8b542b/html5/thumbnails/19.jpg)
Platinised Gold Foil: It is a laminated structure can be
produced in
one of the 2 ways.
1. 2 sheets of No.4 pure gold foil and a
layer of pure platinum foil sandwiched
between there can be hammered until
the thickness of No.4 sheet is obtained.
![Page 20: Gold](https://reader035.fdocuments.in/reader035/viewer/2022062220/555ae0e6d8b42a024a8b542b/html5/thumbnails/20.jpg)
2. Layers of platinum and gold can
be bonded together by cladding
process during the rolling
operation.
Objective of adding platinum:
Increases hardness and wear
resistance
![Page 21: Gold](https://reader035.fdocuments.in/reader035/viewer/2022062220/555ae0e6d8b42a024a8b542b/html5/thumbnails/21.jpg)
Electrolytic Precipitate:
Crystalline gold powder formed by
electrolytic precipitation.
Powder is formed by sintering at an
elevated temp. well below the melting point of
gold, it causes self diffusion between
particles where they are in contact.
![Page 22: Gold](https://reader035.fdocuments.in/reader035/viewer/2022062220/555ae0e6d8b42a024a8b542b/html5/thumbnails/22.jpg)
Mat Gold ( Rule 1937)
Is a crystalline, electrolytically
precipitated gold form that is formed
into strips .Preferred ease in building
up the internal bulk, more easily
compacted within and adapted to the
retentive portion of the prepared
cavity.
![Page 23: Gold](https://reader035.fdocuments.in/reader035/viewer/2022062220/555ae0e6d8b42a024a8b542b/html5/thumbnails/23.jpg)
Disadvantages:Disadvantages:
Because it is loosely packed it is
friable and contain numerous void
spaces.
2- material technique mat is
covered with a veneer of foil.
![Page 24: Gold](https://reader035.fdocuments.in/reader035/viewer/2022062220/555ae0e6d8b42a024a8b542b/html5/thumbnails/24.jpg)
Mat foil
Sandwich of electrolytic precipitated
gold powder between sheets of No.3
gold foil
PurposePurpose – Try to eliminate the need to veneer the restoration with a layer of foil
No longer Marketed
![Page 25: Gold](https://reader035.fdocuments.in/reader035/viewer/2022062220/555ae0e6d8b42a024a8b542b/html5/thumbnails/25.jpg)
Alloyed electrolytic Alloyed electrolytic precipitate precipitate
The newest forms of electrolytic
precipitate electro alloy RV is alloyed
with calcium. Calcium content of the
finished product is about 1%
Purpose is to produce stronger
restoration by dispersion strengthening
![Page 26: Gold](https://reader035.fdocuments.in/reader035/viewer/2022062220/555ae0e6d8b42a024a8b542b/html5/thumbnails/26.jpg)
Powdered Gold:
1st used in early 1960’s
Gold powder was enclosed in No. 3
gold foil .maximum particle size is 74
m Avg 15 m
![Page 27: Gold](https://reader035.fdocuments.in/reader035/viewer/2022062220/555ae0e6d8b42a024a8b542b/html5/thumbnails/27.jpg)
The atomized and chemically
precipitated powders are
1st mixed with a soft wax to form pellets
These wax – gold pellets wrapped with
foil
![Page 28: Gold](https://reader035.fdocuments.in/reader035/viewer/2022062220/555ae0e6d8b42a024a8b542b/html5/thumbnails/28.jpg)
Removal of Surface Removal of Surface Impurities:Impurities:
With the exception of non cohesive
gold the DFGs are received by the
dentist in a cohesive condition.
During storage and packaging they are
exposed to the atmosphere
![Page 29: Gold](https://reader035.fdocuments.in/reader035/viewer/2022062220/555ae0e6d8b42a024a8b542b/html5/thumbnails/29.jpg)
It is necessary to heat the foil or pellet
before it is carried into the prepared
cavity. It is called
Annealing, heat treatment, degassing a
more appropriate term is desorption. It
is essential to achieve a cohesive mass.
![Page 30: Gold](https://reader035.fdocuments.in/reader035/viewer/2022062220/555ae0e6d8b42a024a8b542b/html5/thumbnails/30.jpg)
Chamois finger tips should be worn by the
dentist to protect the gold from
contamination.
![Page 31: Gold](https://reader035.fdocuments.in/reader035/viewer/2022062220/555ae0e6d8b42a024a8b542b/html5/thumbnails/31.jpg)
Proper desorption is a matter of heating long enough at a temperature that removes gases and in case of powdered gold burns away the wax.
Temperatures in the range of 600-13000F must be produced
Under heating should be avoided because it does not adequately remove the impurities
![Page 32: Gold](https://reader035.fdocuments.in/reader035/viewer/2022062220/555ae0e6d8b42a024a8b542b/html5/thumbnails/32.jpg)
Overheating should be avoided because
excessive sintering causes the material to
become more stiffer less ductile and
difficult to condense.
- Too Long time
- Too high temperature
Temperatures below 3150C are inadequate
![Page 33: Gold](https://reader035.fdocuments.in/reader035/viewer/2022062220/555ae0e6d8b42a024a8b542b/html5/thumbnails/33.jpg)
The Gold can be heated in two ways
1.Flame Heating
Flame annealing, held near the top of the flame,
The alcohol flame is transparent; the flame from the pellets is visible
![Page 34: Gold](https://reader035.fdocuments.in/reader035/viewer/2022062220/555ae0e6d8b42a024a8b542b/html5/thumbnails/34.jpg)
2.Electric Annealing
Pellets are being heated on
a tray
![Page 35: Gold](https://reader035.fdocuments.in/reader035/viewer/2022062220/555ae0e6d8b42a024a8b542b/html5/thumbnails/35.jpg)
When heating in bulk on a tray, excessive
amounts should be avoided, since the
difficulties arising from prolonged
heating can arise, from repeated heating
as well.
![Page 36: Gold](https://reader035.fdocuments.in/reader035/viewer/2022062220/555ae0e6d8b42a024a8b542b/html5/thumbnails/36.jpg)
Handle the pieces with stain less steel wire
points that will not contaminate the gold.
Flame desorption occurs when the gold
segment has exhibited a dull red glow.
![Page 37: Gold](https://reader035.fdocuments.in/reader035/viewer/2022062220/555ae0e6d8b42a024a8b542b/html5/thumbnails/37.jpg)
The fuel may be alcohol or gas but
alcohol is preferred because there is less
danger of contamination.
Alcohol must be pure methanol or
ethanol without colorants or additives.
![Page 38: Gold](https://reader035.fdocuments.in/reader035/viewer/2022062220/555ae0e6d8b42a024a8b542b/html5/thumbnails/38.jpg)
Advantages of flame desorption
1. Ability to select a piece of appropriate size.
2. Desorption of only these pieces used.
3. Less exposure to contamination.
4. Less danger of over sintering
![Page 39: Gold](https://reader035.fdocuments.in/reader035/viewer/2022062220/555ae0e6d8b42a024a8b542b/html5/thumbnails/39.jpg)
DISADVANTAGES OF ELECTRIC ANNEALING
- Pellets may stick together, if the tray is
moved.
- Air currents may effect the uniformity of
heating
- Difficult to anneal appropriate amounts of
gold.
![Page 40: Gold](https://reader035.fdocuments.in/reader035/viewer/2022062220/555ae0e6d8b42a024a8b542b/html5/thumbnails/40.jpg)
- Oversintering.
- Greater exposure to contamination.
- Size selection among the pieces of
desorbed gold is limited.
![Page 41: Gold](https://reader035.fdocuments.in/reader035/viewer/2022062220/555ae0e6d8b42a024a8b542b/html5/thumbnails/41.jpg)
COMPACTION OF DIRECT FILLING COMPACTION OF DIRECT FILLING
GOLDGOLD
Condensation is the procedure used to
condense and harden gold inside the cavity
preparation
2 main process
1. Welding
2. Wedging
![Page 42: Gold](https://reader035.fdocuments.in/reader035/viewer/2022062220/555ae0e6d8b42a024a8b542b/html5/thumbnails/42.jpg)
Welding:
Forming atomic bonds between pellets or
layer as result of condensation.
![Page 43: Gold](https://reader035.fdocuments.in/reader035/viewer/2022062220/555ae0e6d8b42a024a8b542b/html5/thumbnails/43.jpg)
Wedging refers to the pressurized
adaptation of the gold form within the
space between the tooth structure walls
that have been slightly deformed
elastically.
![Page 44: Gold](https://reader035.fdocuments.in/reader035/viewer/2022062220/555ae0e6d8b42a024a8b542b/html5/thumbnails/44.jpg)
Straight points are cut in the prepared
cavity and the 1st pieces of foil are
wedged into these areas
![Page 45: Gold](https://reader035.fdocuments.in/reader035/viewer/2022062220/555ae0e6d8b42a024a8b542b/html5/thumbnails/45.jpg)
COMPACTION:COMPACTION:
Can be done by:
1. Hand mallet.
2. Pneumatic vibratory condensers.
3. Electrically driven condensers.
![Page 46: Gold](https://reader035.fdocuments.in/reader035/viewer/2022062220/555ae0e6d8b42a024a8b542b/html5/thumbnails/46.jpg)
a. Nichrome wire used for carrying gold;
b. Pneumatic condenser
c. Detachable condensing tins
![Page 47: Gold](https://reader035.fdocuments.in/reader035/viewer/2022062220/555ae0e6d8b42a024a8b542b/html5/thumbnails/47.jpg)
1. Strength and Hardness:
BHN of pure gold is 25. During
condensation its hardness rises to 75.
Tensile strength rises from 19000 psi to
32000 psi.
Yield strength rises from 0 to 30,000 psi
PHYSICAL PROPERTIES OF COMPACTED GOLD
![Page 48: Gold](https://reader035.fdocuments.in/reader035/viewer/2022062220/555ae0e6d8b42a024a8b542b/html5/thumbnails/48.jpg)
3) Density:
Density of pure gold is 19.3. Density of
well compacted direct gold is 16.5 cm3
The difference is due to the presence of
porosity and voids
4. Melting point of Gold-1063O C
![Page 49: Gold](https://reader035.fdocuments.in/reader035/viewer/2022062220/555ae0e6d8b42a024a8b542b/html5/thumbnails/49.jpg)
5.Tarnish and Corrosion Resistance:
Is good, there is very little marginal
leakage between the filling and cavity
walls, if the compaction is good.
6. It dissolves in aqua regia
7. high thermal conductivity (.710cal /sec
/cm2/(0C/cm)
![Page 50: Gold](https://reader035.fdocuments.in/reader035/viewer/2022062220/555ae0e6d8b42a024a8b542b/html5/thumbnails/50.jpg)
6 Biocompatibility:
It is biocompatible. Produces
only a minimal pulpal response, if
compacted properly. The technique,
however, does involve a certain amount of
trauma to the tooth and its supporting
tissues.
![Page 51: Gold](https://reader035.fdocuments.in/reader035/viewer/2022062220/555ae0e6d8b42a024a8b542b/html5/thumbnails/51.jpg)
![Page 52: Gold](https://reader035.fdocuments.in/reader035/viewer/2022062220/555ae0e6d8b42a024a8b542b/html5/thumbnails/52.jpg)