ABOUT YOUR CHARGING STATION

GETTING STARTED

QUICK START GUIDE

PRODUCT SPECIFICATIONS

Mechanical

Compatibility Batteries for Linea Pro 7, Linea Pro 7i, and Linea Pro 7+

Weight 640g (1.41 lb)

Dimensions 450mm x 135mm x 61mm (17.5” x 5.31” x 2.40”)

ElectricalConnector DC barrel connector

Input 100-240V, ~1.8A, 50-60Hz 9V 5A (power adapter included)

Output to Linea Pro 7 5.15V

Output to Spare Battery 4.2V

Certifications FCC, CE, UL, RoHS

EnvironmentalOperating Temperature: -10°C to +40°C (14°F to 104°F)

Storage Temperature: -15°C to +50°C (5°F to 122°F)

Relative Humidity: 5% to 90% Relative Humidity

LINEA PRO ® 7 Series Spare Battery Charging Station

1. Battery slots

2. LED indicators

3. Battery release buttons

4. Top orientation slots

5. Power connector

6. Opening for plastic feet

7. Cooling vents

8. Bottom rubber feet

9. Battery polarity indicators

BATTERY STATUS LED INDICATORS

If the battery is completely discharged, charging time to fully charge is approximately 2 hours and 50 minutes.

1. Plug the DC barrel end of the power supply into the unit.

2. Plug AC power cord into a wall outlet.

3. Confirm LEDs are illuminated indicating charger is connected and ready for charging.

4. Gently insert spare batteries into battery charging slots, paying close attention to lining up the (+) and (-) of the battery with the symbols on the charger.

5. To eject a spare battery, press one of the five release buttons.

Note: This guide applies to charging stations for the standard Linea Pro 7, Linea Pro 7i, and Linea Pro 7+.

Orange Inserted battery is charging.

Green Charging complete or device/battery not inserted.

None Power supply not connected.

PLASTIC FOOTING

Mobility Sales/Technical Center Infinite Peripherals, Inc. 17681 Mitchell NIrvine, CA 92614Toll-Free: (866) 278-7860 Office: (949) 222-0300

Headquarters/Main Warehouse Infinite Peripherals, Inc. 2312 Touhy AvenueElk Grove Village, IL 60004 Toll-Free: (800) 278-7860 Office: (847) 818-1260Fax: (847) 818-1287

Specifications subject to change without notice. Infinite Peripherals, Mobilize Your Enterprise, Linea Pro, , Infinea Tab and Infinea Omni are trademarks of Infinite Peripherals, Inc. All other trademarks are the property of their respective owners.

Technical Support Infinite Peripherals, Inc. 17681 Mitchell N Irvine, CA 92614Toll-Free: (866) 278-7860Office: (949) 222-0300

Emailinfo@ipcmobile.com

Websiteipcmobile.com

• Note: Box contents and part numbers may vary based on order configuration.

Infinite Peripherals does not warrant, and is not responsible for, any damage to the Linea Pro 7 charger (“Product”) as a result of liquid or solid particle intrusion into the Product or damage caused by dropping the Product. If a material or workmanship defect arises with regard to any Infinite Peripherals product, and a valid claim is received within the Warranty Period, Infinite Peripherals (at its sole discretion) will (1) repair the Product using new or refurbished parts, or (2) replace the Product with a new or refurbished Product. For purposes of this limited warranty, “refurbished” means a product or part that has been substantially returned to its original specifications. In the event of a defect, these are your exclusive remedies.

WARNINGS & CAUTIONSPlease observe the following precautions:

• Keep the charger away from liquids. Donot immerse the charger in water.

• The charger is intended for indoor useonly. When not in use, store it in a cool,dry place.

• Do not store the charger near a heatsource. Keep both the power supplyand charger away from direct sunlightand/or heat.

• Device should only be repaired byInfinite Peripherals or an authorizedservice facility.

Note: Batteries are compatibile only with PL-15-110 1900/2100/2400mAh Li-ion rechargeable.

WARRANTY

TROUBLESHOOTING

PRODUCT RETURNSUse the link below to access our online support center and create an account. This allows you to gain access to our Knowledge Base and online support services. Through the online support center, you’ll be able to download files, open a Support Ticket, manage your RMAs, view your account Profile, and subscribe to Alerts.

Visit our online support center at: https://ipcmobile.com/support/rma/

To Request a RMA:

1. Create a user account in the RMASupport page at https://ipcmobile.com/support/rma/.

2. Login to your user account and clickCreate RMA Request.

3. Read the instructions and complete theonline request form.

4. Note the assigned RMA number andwrite it clearly on your shipping carton.

5. Ship your equipment back to us at theaddress provided.

ADDITIONAL INFORMATIONPlease contact your Infinite Peripherals sales representative for technical specifications and additional product documentation.

LED not illuminated?

• Power cord not plugged into walloutlet.

• DC barrel plug not plugged intocharger.

QSG-10052 REV. A

1. To stand the charger vertically, clip eachplastic foot to the openings on the bottom ofthe charger.

2. To mount a second charging station on topof the first station, position the foot on thesecond charger on top of the orientationslots. Magnets inside of both stations willsecure them together.