Get the free mobile app athttp:/ /gettag.mobi

PowerButton

Limited WarrantyThis meter is warranted against defects in material or workmanship for one year from

date of purchase from an authorized Fieldpiece dealer. Fieldpiece will replace or repair the defective unit, at its option, subject to verification of the defect.

This warranty does not apply to defects resulting from abuse, neglect, accident, unauthorized repair, alteration, or unreasonable use of the instrument.

Any implied warranties arising from the sale of a Fieldpiece product, including but not limited to implied warranties of merchantability and fitness for a particular purpose, are limited to the above. Fieldpiece shall not be liable for loss of use of the instrument or other incidental or consequential damages, expenses, or economic loss, or for any claim of such damage, expenses, or economic loss.

State laws vary. The above limitations or exclusions may not apply to you.

Obtaining ServiceEmail Fieldpiece warranty department at fpwarranty@fieldpiece.com to get an RMA

and for current fixed price repair service. Send check or money order made out to Fieldpiece Instruments for the amount quoted. If your meter is under warranty there will be no cost for the repair/replacement. Send your meter, freight prepaid, to Fieldpiece Instruments. Send proof of date and location of purchase for in-warranty service. The meter will be repaired or replaced, at the option of Fieldpiece, and returned via least cost transportation.

For international customers, warranty for products purchased outside of the U.S. should be handled through local distributors. Visit our website www.fieldpiece.com to find your local distributor.

© Fieldpiece Instruments, Inc 2015; v20

FCC Compliance and Advisory StatementThis device complies with Part 15 of the FCC rules. Operation is subject to the following two

conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, according to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

1 Reorient the receiving antenna.2 Increase the separation between the equipment and receiver.3 Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.4 Consult the dealer or an experienced radio/TV technician for help.

Shielded interface cables must be used in order to comply with emission limits.

FCC Caution: To ensure continued compliance, any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.

SpecificationsWireless range: 1 to 100 feet (Fieldpiece tools to JL2); 1 to 30 feet (JL2 to mobile device).

Building materials may adversely affect wireless distance.Initial sync setup range: 1 to 10 feet (Fieldpiece tools to JL2)Mini-USB port: For charging and updating device firmware.Operating (discharge) environment: 32°F to 122°F (0°C to 50°C) at <85% RHStorage temperature: -4°F to 140°F (-20°C to 60°C), at <85% RHBattery charging environment: 32°F to 113°F (0°C to 45°C), at <85% RHBattery type: 3.7V rechargeable lithium-ion polymer batteryBattery life: 48 hours approx.Auto power off: 30 minutes when not wirelessly connected.Low Battery indication: Blinking red LED indicates

approximately 1 hour of battery life remaining.Weight: 2.9 ounces (82 g)

Wireless Tips1 You can connect your wireless tools to JL2 in any order, just not at the same time.2 Once your wireless SMAN and SDP2 have been synced to the JL2, they will automatically

re-sync to JL2 when turned back on. Turn on JL2 first, then your Fieldpiece wireless tools to avoid any unnecessary searching by the tools.

3 You can use a new SMAN or SDP2 with Job Link by syncing the new tool. Job Link automatically de-syncs the previous tool.

4 In European wireless mode, the green and blue LEDs are swapped.5 To de-sync all tools from your JL2, press SYNC for 5 seconds (LED blinks blue once).6 Only one SMAN and/or one SDP2 can be synced to a JL2 at a time.7 Building materials may degrade any RF signal and adversely affect the wireless range of

Fieldpiece tools to JL2.8 For the highest performance, we recommend using only one JL2 set-up per job site.