General Model RAGL Specifications Laboratory Glass ROTAMETER€¦ · Certificate No. : PTB 03 ATEX...
Transcript of General Model RAGL Specifications Laboratory Glass ROTAMETER€¦ · Certificate No. : PTB 03 ATEX...
GeneralSpecifications
Model RAGLLaboratory Glass ROTAMETER
This type of Rotameter is designed for measurement of liquids and gases.The conical glass metering tube has a free rotating float. This metering tube is mounted in a vertical pipeline with flow direction upwards. The flow is indicated by the top of the float and can be read from the standard scale on the metering tube or from aconnected scale.
FEATURES• Large selection of measuring ranges• Anti-static metering tubes for measurement of small quantities of gas• High accuracy of free rotating float even at low flow rates• Low pressure loss• Visual check of the medium• Non-powered local indication• Large selection of scales• Optional built-in valve
ContentsFeatures page 1Standard Specifications page 2Metrological Regulations in CIS (Gost) page 2Option Specifications page 4Model Specifications page 6Flow Table for Water / Liquids page 7Flow Table for Air / Gases page 8Options page 9Dimensions RAGL page 10Dimensions frame for Panel mounting (option /QA) page 11Dimensions frame for Panel mounting (option /QB) page 11Dimensions foot (/QF) page 12
GS 01R01B08-00E-E© Copyright 2004 (RYG)
13th edition, July 2017 (RYG)
GS 01R01B08-00E-E
with M-metering tube
with L-metering tube
Rota Yokogawa GmbH & Co. KGRheinstr. 8D-79664 WehrGermany
with K-metering tube
GS 01R01B08-00E-E 13h edition, June 27, 2017-00 All Rights Reserved. Copyright © 2004, Rota Yokogawa
2
STANDARD SPECIFICATIONS
RoHS Directive 2011/65/EU: RoHS conform according to EN 50581
Measurable flow rates • Water (20 °C) : 0.002 l/h – 110 l/h • Air (20 °C; 1 bar abs.): 0.1 l/h – 3500 l/hMeasuring range : • K metering tube : 10:1 • M metering tube : 20:1 (10:1) • L metering tube : 20:1 Metering tubes : K6; M6; L6; K7; R7; M7; L7Accuracy:
Glass metering tube
Length Measuring accuracy acc. VDI/VDE 3513 sheet 2 (qG=50 %)
Measuring accuracy acc. VDI/VDE 3513 sheet 2 (qG=100 %)
R741 - R743K631 - K743
75 mm75 mm
6 % (only with ball)4 % (for ball 6 %)
------------
M613 - M622M624 - M747
150 mm150 mm
------2.5 %
4 % ------
L613 - L623L624 - L747
300 mm300 mm
------1.6 %
2.5 %------
Glass metering tube
Length Flow accuracy full scale
R741 - R743K631 - K743
75 mm75 mm
± 6 %± 4 % (± 6 %)
M613 - M622M624 - M747
150 mm150 mm
± 4 %± 2.5 %
L613 - L623L624 - L747
300 mm300 mm
± 2.5 %± 1.6 %
Material process connection • Inner thread : PP or 1.4571 (for option controller 1.4571) • Cutting ring : 1.4571 or steel • Nozzle : 1.4571 or steel • Swagelok connection : 1.4571Material of fitting : Polypropylene; 1.4571 Material of gaskets : PE / Buna (for M-, K-, R- tube) PTFE / Buna (for L-tube) • With option /MV : PTFE / VitonLength approx. : 100 mm; 175 mm or 325 mmWeight : 0.3 – 1.3 kg, depending on design (without stand and controller)
METROLOGICAL REGULATION IN CIS (GOST)
RAGL has “Pattern Approval Certificate of Measuring Instruments” and is registered as a measuring instrument in Russia. For export to CIS countries please contact your Yokogawa representative.
GS 01R01B08-00E-E 13h edition, June 27, 2017-00All Rights Reserved. Copyright © 2004, Rota Yokogawa
3
Max. Temperature (see Figure 1) • Fitting material SS : 100 °C • With option /MV : 130 °C (not for PP-Rotameter) • Fitting material PP : 80 °CMax. Pressure (see Figure 1): 16 bar Figure 1:
Design (valve): With or without built-in valveKV-value of valves (see Figure 2):Figure 2:
0
10
20
30
40
50
60
70
80
90
0 2 4 6 8 10 12 14 16 18
Ambien
t/Med
ium
Tempe
rature in
°C
Pressure in bar(g)
Temperature specification for PP‐heads
without valve
with valve
00.020.040.060.080.100.120.140.160.180.200.220.240.26
0 1 2 3 4 5 6 7 8 9 10 11
Cone 42 to 51Cone 32 to 41Cone 22 to 31Cone 13 to 21
KV- value KV-values of the valves
Turns of the stem
GS 01R01B08-00E-E 13h edition, June 27, 2017-00 All Rights Reserved. Copyright © 2004, Rota Yokogawa
4
CONTROLLER (OPTION /R1 AND /R3) Differential pressure controller for a constant flow at fluctuations of the pressure. These are no pressure limiting valves.• The controller /R1 is for liquids with variable inlet or outlet pressure and for gases with variable inlet pressure and constant back pressure.• The controller /R3 is for gases with fluctuations of the back pressure.Max. liquid flow : 100 l/hMax. gas flow : 3000 l/hMax. temperature : 80 °CRecommended differential pressure: > 400 mbar Materials:
Housing, Tubes, Springs Membrane
316L/316Ti (1.4404/1.4571) PTFE
Control characteristic:
OPTION SPECIFICATIONS
LIMIT SWITCH (OPTION /GR1 – /GR8)(For floats of Mumetal or PVDF with Fe-core only and Qmin > 0.004 l/h water or 0.3 l/h air)Type : Bistable inductive ring sensor Power supply : 4.5 V – 15 V DCConsumption : acc. DIN EN 60947-5-6 (NAMUR)For float below ring sensor : < 1mA above ring sensor : > 2.2 mATemperature range : -25 °C – +65 °C not Ex-type Protection : IP 67 Electrical connection : 2 x 0.14 mm² , with shield 0.4 mm², 2 m longEMC : EMC compliance according EN 60947-5-2 table 8 (for use in industrial locations). Based on EMC compliance the limit switch is marked with CE, EAC and RCM.However, in certain situations the switch may react from “off” to “on”. In such cases the customer has to assure by himself that this does not happen. Normally the behavior can be improved by more distance to the EMC-source or by using a different cable position.Explosion proof (option /KS1, /ES1, /NS1):Temperature range :-25 °C – +60 °CType : RI20-10K/G or RI20-17K/GCertificate No. : PTB 03 ATEX 2111 (/KS1) IECEx PTB13.0023 (/ES1) NEPSI GYJ14.1356 (/NS1)Protection : Ex ia IIC T6 GbSafety relevant data: Ui = 12 V, Ii = 22 mA, Pi = 66 mW, Li = 20 mH, Ci = 200 nF
or see certificate for data
CE-marking: II 2 G
F2.EPS
inlet pressure
The curves V1 to V6 show how the flow depends on the inlet pressure for different valve settings. The back pressure at the outlet (ambient pressure) is 1 bar.
l/h air at 20 °C ; 1.013 bar abs.
POWER SUPPLY FOR LIMIT SWITCH (OPTION /W)Type : Transmitter relay acc. DIN EN 60947-5-6 (NAMUR)Power supply : 230V AC (/W2) 115V AC (/W1) 24V DC (/W4)Switching capacity : max. 250 V AC; max. 4A or max. 500 VARelay output : 1 or 2 potential free changeover contactsExplosion proof : Intrinsic safe [Ex ia] II C PTB 00 ATEX 2081 (/W1A, /W1B, /W2A, /W2B) PTB 00 ATEX 2080 (/W4A, /W4B) IECEx PTB11.0031 (/W1A, /W1B, /W2A, /W2B) IECEx PTB11.0034 (/W4A, /W4B)
GS 01R01B08-00E-E 13h edition, June 27, 2017-00All Rights Reserved. Copyright © 2004, Rota Yokogawa
5
15
4 631
14
12 10118 79U
Mai
ns /
Net
z / T
ensi
on
One
cha
nnel
tran
smitt
er :
...-S
R2-
Ex1.
W, c
onne
ctio
n lik
e lim
it M
AXEi
nkan
alig
er V
erst
ärke
r : .
..-SR
2-Ex
1.W
, Ans
chlu
ss w
ie G
renz
wer
t MAX
Un
cana
l am
plifi
cate
ur
: ...
-SR
2-Ex
1.W
, rac
cord
com
me
limite
MAX
Tran
smitt
er R
elay
Tren
nsch
altv
erst
ärke
rAm
plifi
cate
ur S
epar
ateu
r
Limit /
Gre
nzwe
rt / L
imite
MIN
Limit /
Gre
nzwe
rt / L
imite
MAX
Max
Min
EN 6
0947
-5-6
(Nam
ur)
Max
imum
med
ium
- and
am
bien
t tem
pera
ture
:M
axim
ale
Med
ium
s- u
nd U
mge
bung
stem
pera
tur :
Tem
pera
ture
am
bian
te e
t tem
pera
ture
de
fluid
e m
axim
ale
:
Tam
ax =
60
°C
-+-+
~~
+ - + -
Ci
= 20
0 nF
Ex i
a IIC
T6
Li =
20
mH
RI2
0-10
, R
I20-
17
Pi =
66
mW
Ii =
22
mA
Ui
= 12
V
PTB
03 A
TEX
2111
XIE
CEx
PTB
.13.
0023
XN
EPSI
GYJ
14.1
356
C =
232
0 nF
I =
19,
1 m
AP
= 5
1 m
W
U =
10.
6 V
L =
97
mH
PTB
00AT
EX 2
081
EEx
ia /
ib I
ICKF
A6-S
R2-
Ex2.
W
oo oo o
C =
241
0 nF
I =
13
mA
P =
34
mW
U =
10.
5 V
L =
210
mH
PTB
00AT
EX 2
080
EEx
ia /
ib I
ICKF
D2-
SR2-
Ex2.
W
oo oo o
Haz
ardo
us A
rea
Ex- B
erei
chZo
ne E
x
Safe
Are
aSi
cher
er B
erei
chH
ors
Zone
Optio
n /W
4B 2
4VDC
KFD2
-SR2
-Ex2
.WOp
tion
/W2B
230
VAC
KFA6
-SR2
-Ex2
.WIn
ducti
ve ri
ng se
nsor
RI2
0In
dukti
ver R
ingini
tiato
r RI2
0Ba
gue
induc
tive
RI20
Rota
met
er R
AGL
optio
n /G
Rx (x
= 1
... 8
)
F2.E
PSIE
CEx
PTB
.11.
0034
IEC
Ex P
TB.1
1.00
31N
EPSI
GYJ
12.1
081
NEP
SI G
YJ12
.107
9
GS 01R01B08-00E-E 13h edition, June 27, 2017-00 All Rights Reserved. Copyright © 2004, Rota Yokogawa
6
MODEL SPECIFICATIONSProcess connection diameter
Model Process connection Material Process connection
Material Holder
Design (valve)
Metering tube length / diameter
Inner- thread
Cutting-ring
Nozzle Swageloc
Code Code Code Code Code Code Code Code Code
¼ inch RAGL41 T0 - - - PP PPRAGL41 R0 - - - PP PP
6 mmRAGL53 - C0 - - SS;ST PP
NNN;SAE;SBE;SAA;SBA
K6; K7; R7; M6;
M7;L6;L7
RAGL53 - - P0 - SS PPRAGL53 - - - W0 SS PP
8 mmRAGL54 - C0 P0 - SS;ST PPRAGL54 - - P0 - - -RAGL54 - - - W0 SS PP
10 mm RAGL55 - C0 - - SS;ST PPRAGL55 - - - W0 SS PP
12 mm RAGL56 - C0 - - SS;ST PP
¼ inch RAGL41 T0 - - - SS SSRAGL41 R0 - - - SS SS
6 mm RAGL53 - C0 P0 W0 SS SS8 mm RAGL54 - C0 P0 W0 SS SS10 mm RAGL55 - C0 - W0 SS SS12 mm RAGL56 - C0 - W0 SS SSProcess connection
Inner thread NPT…...Inner thread RP….....
-T0-R0
Cutting ring……………….......... -C0Nozzle……………………........................... -P0Swageloc-connection……….......……………………. -W0
Material of process connection Polypropylene……….............................. PP1.4571…………………........................... SSSteel……………………………....…….... ST
Material of Holder Polypropylene……………………..............................… -PP1.4571…………………………………………………….. -SS
Design Without valve NNNValve Gasket Valve seat
input Buna Silver ……………………...... SAEinput Viton Silver ……………………...... SBE
output Buna Silver ……………………...... SAAoutput Viton Silver ……………................. SBA
The suffix code of the metering tube-float-combination can be read from the flow table……………………………...... xxxxx-xxxxx
Options (see separate table)………………………………………………………………………………………………….................... /xx
GS 01R01B08-00E-E 13h edition, June 27, 2017-00All Rights Reserved. Copyright © 2004, Rota Yokogawa
7
FLOW TABLES WITH METERING TUBE- FLOAT COMBINATION FOR WATER / LIQUIDSFlow table Suffix code metering tube-float-combination
Water 20 °C / Liquid Metering tube FloatRecommended
comb. row 1Alternative comb.
row 2-X X XX X -XX X X X
Max. Flow [l/h]
Pressure-loss
[mbar]
Max. Flow[l/h]
Pressure-loss*)[mbar]
Length Code
Diameter Code
Tube Cone Code
Scale Code
Material Code
Diameter Code
Flow mark Code
Insertion Code
1 2 - - K 6 31
G;A;N;D
row 1 SS;MU 1)
B
L N
2.5 3 - - K 6 334 4 - - K 6 346 8 - - K 6 3710 4 - - K 7 41
C15 5 - - K 7 4226 6 - - K 7 4340 5 - - K 7 44
D63 8 - - K 7 47110 10 - - K 7 5110 4 - - R 7 41
SR
C16 4 - - R 7 4225 5 - - R 7 4340 5 - - R 7 44
D63 6 - - R 7 47100 6 - - R 7 51
0.025 1 0.054 2 M 6 13 row 1 TT;KR
A 2)
0.063 2 0.15 3 M 6 170.16 3 0.36 4 M 6 22 row 2
SS;MU 1)
0.4 1 0.8 2 M 6 24
row 1 TT;KR;PD 1)
1 2 2 3 M 6 31
B1.6 3 2.8 3 M 6 322.5 4 4 4 M 6 333.5 5 6 8 M 6 354 2 6.3 4 M 7 34
C6.3 3 10 5 M 7 37
row 2 SS;MU 1)
10 3 16 5 M 7 4116 4 27 6 M 7 4225 5 44 6 M 7 43
D40 5 66 8 M 7 4463 10 100 10 M 7 47
0.025 1 0.054 2 L 6 13row 1 TT;KR A 2)
0.04 1 0.074 2 L 6 140.063 2 0.15 3 L 6 170.1 2 0.23 3 L 6 210.16 3 0.36 4 L 6 22 row 2
SS;MU 1)0.25 4 0.54 5 L 6 230.40 1 0.8 2 L 6 24
row 1 TT;KR;PD 1)
B0.63 1 1.2 2 L 6 27
1 2 2 3 L 6 311.6 3 2.8 3 L 6 322.5 4 4 4 L 6 334 2 6.3 4 L 7 34
C6.3 2 10 4 L 7 37
row 2 SS;MU 1)
10 3 16 5 L 7 4116 4 27 6 L 7 4225 5 44 6 L 7 4340 5 66 8 L 7 44
D63 10 110 10 L 7 47
Tube length (type) 75 mm.......................... KRML
XX
GAND
SSTTMUPDKRSR
XL
N
75 mm..........................150 mm…...………..….300 mm........................
Tube diameter 10 mm; 17 mm.............…..............Tube cone See flow table………………....……………....…Tube medium scale Scale on tube (recommended).......…………….....….........
Connection scale 3) ............................................................Metering tube with mm-division only……..…………….......Dual scale, scale on tube and connection scale 3) 4) ..........
Float material 1.4571…………………………………………….................................…Titanium...............................................................................................Mumetal (for limit switch /GR1,/GI2 and /GR4....................................PVDF (for limit switch /GR2 to /GR4)…............................….........…Corundum...........................................................................................CrNi-ball……………………………………………………………........…
Float diameter 1.6 mm to 9 mm………………………………………….............………………………Flow mark Liquid..........................................................................................................................................Float insertion Without magnet...........................................................................................................................................1) For option limit switch /GR1 – /GR8 2) Max. viscosity is 2 mPas*s 3) Not with option limit switch /GR1 – /GR8 4) With option /PT mm- scale on tube and product scale connected *) The indicated flow drop is a pilot value and may deviate based on the type of Rotameter. Additional tube-float-combinations with different float materials and different measuring ranges are available on request. If the Rotameter should be used in other media- / process- conditions use the Yokogawa Flow Configurator.
GS 01R01B08-00E-E 13h edition, June 27, 2017-00 All Rights Reserved. Copyright © 2004, Rota Yokogawa
8
FLOW TABLES WITH METERING TUBE- FLOAT COMBINATION FOR AIR / GASFlow table Suffix code metering tube-float-combination
Air 20 °C, 1 bar abs./Gas Metering tube FloatRecommended comb. row 1
Recommended comb. row 2
-X X XX X -XX X X X
Max. Flow [l/h]
Pressure-loss *) [mbar
Max. Flow
[l/h]
Pressure-loss *)
[mbar]
Length Code
Diameter Code
Tube cone Code
Scale Code
Material Code row 1
Material Code row 2
Diameter Code
Flow mark Code
Insertion Code
16 1 25 2 K 6 31
G;A;ND
GLTT; KR;
PD 1)
B
G N
40 1 55 2 K 6 3363 2 85 3 K 6 34100 3 140 5 K 6 37160 2 240 3 K 7 41
C250 2 360 3 K 7 42400 2 600 4 K 7 43630 3 1000 4 K 7 44
D1000 4 1600 5 K 7 471600 7 2500 9 K 7 51
3500 10 - - K 7 51SS;
MU 1) -
1.9 1 3 2 M 6 13TT; KR
SS; MU 1)
A4.4 2 7 3 M 6 1710 3 17 4 M 6 2223 2 36 3 M 6 24
TT; KR; PD 1)
B50 2 80 3 M 6 3170 3 110 4 M 6 32100 4 160 4 M 6 33140 5 220 8 M 6 35180 3 260 5 M 7 34
C250 3 340 5 M 7 37400 3 550 5 M 7 41630 4 900 6 M 7 421000 5 1400 6 M 7 431600 5 2200 8 M 7 44 D2400 10 3300 10 M 7 471.9 1 3 2 L 6 13
TT; KR A
3 1 4.5 2 L 6 144.4 2 8 3 L 6 176.5 2 11 3 L 6 2110 3 16 4 L 6 2214 4 23 5 L 6 2323 2 40 3 L 6 24
TT; KR; PD 1)
B33 2 55 3 L 6 2750 2 80 3 L 6 3170 3 110 4 L 6 32100 4 160 4 L 6 33180 3 260 5 L 7 34
C250 3 360 5 L 7 37400 3 600 5 L 7 41630 4 950 6 L 7 421000 5 1500 6 L 7 431600 5 2200 8 L 7 44 D2400 10 3500 10 L 7 47
Tube length (type) 75 mm........................ KML
XXX
GAND
SSTTMUPDKRGL
XG
N
150 mm......................300 mm......................
Tube diameter 10 mm; 17 mm............................Tube cone See flow table………….……………….......…Tube medium scale
Scale on tube (recommended)......………….…...................Connection scale 2)............................................................Metering tube with mm-division only…………..................Dual scale, scale on tube and connection scale 2)3)..........
Float material 1.4571……………………………………………..............................Titanium........................................................................................Mumetal (for limit switch /GR1, /GR2 and /GR4)..........................PVDF (for limit switch /GR1 to /GR4)...........................................Corundum....................................................................................Glass ball.....................................................................................
Float diameter 1.6 mm to 9 mm…....………………………………………………………….............……...Flow mark Gas……………………………………………………………………………………..............…………...Float insertion Without magnet...........................................................................................................................................1) For option limit switch /GR1 – /GR8 2) Not with option limit switch/GR1 – /GR8 3) With option /PT mm- scale on tube and product scale connected *) The indicated flow drop is a pilot value and may deviate based on the type of Rotameter.Additional tube-float-combinations with different float materials and different measuring ranges are available on request.If the Rotameter should be used in other media- / process- conditions use the Yokogawa Flow Configurator.
GS 01R01B08-00E-E 13h edition, June 27, 2017-00All Rights Reserved. Copyright © 2004, Rota Yokogawa
9
OPTIONSOptions Option code Description RestrictionsMarking /B1
/B4/BG
Tag plate (SS)Neutral versionCustomer specific notes on scale
Plate 12 x 40 mm; max. 45 digits
Limit switches /GR1/GR2/GR3/GR4/GR5/GR6/GR7/GR8
Bistable inductive ring sensorBistable inductive ring sensorBistable inductive ring sensorBistable inductive ring sensor2 bistable inductive ring sensors (2 x /GR1) 2 bistable inductive ring sensors (2 x /GR2)2 bistable inductive ring sensors (2 x /GR3)2 bistable inductive ring sensors (2 x /GR4)
Only for float MU A_NOnly for float PD B_N or MU B_NOnly for float PD C_NOnly for float MU C_N, MU D_N; PD D_NOnly for float MU A_NOnly for float PD B_N or MU B_NOnly for float PD C_NOnly for float MU C_N, MU D_N; PD D_N
Ex-proof type /KS1/ES1/NS1
ATEX intrinsically safe „ia“IECEx intrinsically safe „ia“NEPSI intrinsically safe „ia“
Only for /GR1 – /GR8Only for /GR1 – /GR8Only for /GR1 – /GR8; only with /CN
Test and certificates
/H1
/P2
/P3/PP/PT
Oil and fat free for wetted surface acc. to Yokogawa specificationCertificate of Compliance with the order acc. toEN 10204: 2004-2.1As /P2 + Test report acc. to EN 10204: 2004-2.2Pressure test report for measuring systemFlow table for recalculation (with mm-scale for D scale)
Not with /R1 or /R3
Only for N and D scaleAccessoriesmetering tube
/MV Viton PTFE-gasket and Viton O-ring Not for valve with Buna gasket.
Accessoriesfloat stops
/S1 Spring stops made of SS 1.4571
Accessories /QA/QB/QF
Frame for panel mountingWith tapped holes in the connecting heads for mountingFoot stand
Not with /GR1 – /GR8Only for SS holder material
Controller /R1
/R3
Pre- pressure controller 1.4571 (only with valve in inlet: for gas with variable pre- pressure and liquids with variable pre- and back- pressure)Back- pressure controller 1.4571 (only with valve in outlet; for gas with variable back-pressure)
Delivery to Korea
/KC With KC-mark in Korea
Delivery to China
/CN For delivery to China
Power supply for limit switch (es) (transmitter relay)
/W1A/W1B/W2A/W2B/W4A/W4B
KFA5-SR2-Ex1.W /115 V AC, 1 channelKFA5-SR2-Ex2.W /115 V AC, 2 channelsKFA6-SR2-Ex1.W /230 V AC, 1 channelKFA6-SR2-Ex1.W /230 V AC, 2 channelsKFD2-SR2-Ex1.W /24 V DC, 1 channelKFD2-SR2-Ex2.W /24 V AC, 2 channels
Special order /Z Special design, must be specified separately.If /Z is selected, several Suffix of Model-Suffix Code can be changed to Z.
GS 01R01B08-00E-E 13h edition, June 27, 2017-00 All Rights Reserved. Copyright © 2004, Rota Yokogawa
10
DIMENSIONS RAGL
F3.epsENG-018552G and NPT thread ca. 184
fig 1. model NNN (without valve)
fig 2. model SAE and SBE (with valve in input)
fig 3. model SAE and SBE with option /R1 (with valve in input and input pressure controller)
Dimensions in mm Weight in kgMetering tube A B C without
controllerwith
controllerLaboratory Rotameter-Set with case,
stand and metering tubeK6 ; K7 125 100 135 0.3 1.0 ----M6 ; M7 200 175 210 0.4 1.1 ---L6 ; L7 350 325 360 0.6 1.3 about 3.5
GS 01R01B08-00E-E 13h edition, June 27, 2017-00All Rights Reserved. Copyright © 2004, Rota Yokogawa
11
DIMENSIONS WITH TAPPED HOLES IN THE CONNECTING HEADS FOR MOUNTING (OPTION /QB)
DIMENSIONS (OPTION /QA)
A ±0.5 L ±0.5 X Y
K- metering tube 31 128.3 128.3 136
M- metering tube 31 203.3 203.3 211
L- metering tube 31 353.3 353.3 361
Dimensions in mm
Dimensions in mm
GS 01R01B08-00E-E 13h edition, June 27, 2017-00 All Rights Reserved. Copyright © 2004, Rota Yokogawa
12
DIMENSIONS FOOT STAND (OPTION /QF)
134
15
8
Adjustable Screw
Yokogawa has an extensive sales and distribution network. Please refer to the European website (www.yokogawa.com/eu) to contact your nearest representative.
Euroweg 23825 HD AMERSFOORTThe Netherlandswww.yokogawa.com/eu
YOKOGAWA ELECTRIC CORPORATIONWorld Headquarters9-32, Nakacho 2-chome, Musashino-shiTokyo 180-8750Japanwww.yokogawa.com
YOKOGAWA CORPORATION OF AMERICA2 Dart RoadNewnan GA 30265USAwww.yokogawa.com/us
YOKOGAWA ELECTRIC ASIA Pte. LTD.5 Bedok South RoadSingapore 469270Singaporewww.yokogawa.com/sg
YOKOGAWA CHINA CO. LTD.3F Tower D Cartelo Crocodile BuildingNo.568 West Tianshan Road Changing DistrictShanghai, Chinawww.yokogawa.com/cn
YOKOGAWA MIDDLE EAST B.S.C.(c)P.O. Box 10070, ManamaBuilding 577, Road 2516, Busaiteen 225Muharraq, Bahrainwww.yokogawa.com/bh
Dimensions in mm