General GX20/GP20 (/CM2 option) 6SHFL¿FDWLRQV 920MHz ... · resume wireless communication. GM10...

GS 04L51B01-42EN

GX20/GP20 (/CM2 option)GM (/CM2 and /CS2 options)920MHz Wireless Communication

OVERVIEWWireless communication (902.1 to 927.9MHz band) enables the GX20(/CM2), GP20(/CM2), GM10(/CM2) to communicate as a master with compatible GM10 slaves (/CS2), UT52A/UT32A(suffix code type 3:B), and Wireless Input Unit (GX70SM), other Modbus devices and wireless communication sensors. Because slaves are equipped with a repeater function, they can be used to extend the communication distance.(This product can only be used in the US.)

Even when wireless communication is cut off, the most suitable communication route is automatically selected.

* Multi-hop

GX20 (/CM2)

GM10 (/CM2)

Slave (GM10 (/CS2))

Slave (UTA52/UTA32)

Slave (GM10 (/CS2))

Slave (GM10 (/CS2))

Master

GP20 (/CM2)

Sensor (GX70SM)

Features• A single master can accommodate up to 100

slaves.*1 This is limited to 99 for the UT.•Theoutputlargerthanthatofconventionalspecified

low power radio achieving a range of about 800 m*2 with a clear line-of-sight.

• With multi-hop connection, even when wireless communicationiscutoffduetotemporarydeterioration in radio conditions, the most suitable communicationrouteisautomaticallyselectedtoresume wireless communication.

GM10 slaves (/CS2 option) and UT slaves can be used as repeaters to extend communication distance andimproveradioquality.

• Features of the 900 MHz band (compared to the 2.4 GHz band)• Becausetheradiofrequencyislow,radiosignals

attenuate less in the transmission route.• Becausetheradiofrequencyislowandthetendencytogostraightislower,theradiosignalscanmoreeasilydiffractaroundobstacles.

• No license is required.*1 Thenumberofunitsthatcanconnectedmaybelimitedby

the communication data size or the transmission interval. When used for low-speed moving bodies, the maximum

number of routers is limited to 50 including repeaters.*2 The range depends on the operating environment.

ForthedetailedspecificationsoftheGX20,seethefollowinggeneralspecifications.

Material No.: GS 04L51B01-01EN

ForthedetailedspecificationsoftheGP20,seethefollowinggeneralspecifications.


ForthedetailedspecificationsoftheGM10,seethefollowinggeneralspecifications.


ForthedetailedspecificationsoftheI/Omodules,seethefollowinggeneralspecifications.


ForthedetailedspecificationsoftheDigitalIndicatingController,seethefollowinggeneralspecifications.MaterialNo.:GS05P01D81-01ENMaterialNo.:GS05P01C81-01EN

ForthedetailedspecificationsoftheWirelessInputUnit(GX70SM),seethefollowinggeneralspecifications.MaterialNo.:GS04L57B01-01EN

Yokogawa Electric Corporation2-9-32,Nakacho,Musashino-shi,Tokyo,180-8750Japan

GS 04L51B01-42EN©CopyrightOctober20173rd Edition Nov. 20, 2019

GM10 (/CM2)

GX20 (/CM2)

GM10 (/CS2)

Master

Slave

GP20 (/CM2)

GeneralSpecifications

Nov. 20, 2019-00

SPECIFICATIONS● 920 MHz wireless communication (/CM2 and /

CS2)•Wirelesscommunicationstandard:FCCPart15

SubpartCcompliant(§15.247)•Carrierfrequencyband:902.1to927.9MHz• Wireless channel spacing: 600 kHz• Number of wireless channels: 43• Maximum transmission output: 20 mW• Modulation method: GFSK•Antenna:Externalantenna(soldseparately),RP-

SMA-Pconnector• Maximum number of slave receptions: 100 (number

ofslavereceptionsbyasinglemaster,varies depending on the communication conditions)

•Maximumpacketsize:2048bytes•Datarate:100kbpsmax.• Communication distance (line-of-sight distance):

800 m max. (depends on the operating environment)

• Communication format: Mesh/multi-hop* (maximum number of hops: 16)

* Afunctionthatautomaticallyselectsthebest communication path according to the communicationqualitybetweenunits.Itcanbeused to extend the communication distance and improvetheradioquality.

•LEDdisplay:DisplaysthewirelessstatususingST1(green/red) and ST2 (green/red)

•Securityfunction:AES128bitencryption•Implementedprotocol:Modbus(master/slave)

protocol•Modbusslavefunction(/CS2option):Datacanbe

written and read from Modbus master devices (masters (/CM2 option)).

•Modbusmasterfunction*(/CM2option):Readingand writing data to Modbus slave device

* The communication channel function (/MC option) isrequired.Readdataiswrittentocommunicationchannels.

Communicationcycle:When receiver function is [Modbus master] 500 ms, 1 s, 2 s, 5 s, 10 s, 1 minWhen receiver function is [Wireless input unit] 1 s, 2 s, 5 s, 10 s, 20 s, 30 s, 1 min, 2 min, 5 min,

10 min, 20 min, 30 min, 1 hNote:Onlytheabovecommunicationcycleswillwork

properly.Number of commands: 100Commandtypes:Off,read,write

•Configuration/measurementcommunication:Thefollowing functions are available using the dedicated software.

GM10 wireless communication settings Informationaboutslavesconnectingtothe

GM10 GM10 wireless communication status

monitoring* MH920ConsoleInternational,aconsole

softwareapplicationmadebyOkiElectricIndustryCo.,Ltd.

•Wirelesscommunicationconfigurationinterface:USB2.0mini-Btype)

•Rebootswitch:Forrebootingthesystemafterchanging wireless settings

Number of connectable slaves and number of connectable channels depending on Modbus communication cycle*

Number of slaves

Modbus communication cycle500ms 1s 2s

1 125ch 370ch 500ch2 80ch 250ch 500ch4 --- 160ch 500ch8 --- --- 320ch

* Numberofchannelsfor1worddata(INT16,UINT16).Thisvariesdependingontheprocessing load in the device and communication quality.

Dedicated external antenna (sold separately):

ItemType

Sleeve antenna Roof top antenna

PartNo. A1061ER A1062ERInstallationenvironment

Indoors Indoorsandoutdoors

Cable length － 2.5 mAntennatype Dipole StandaloneMaximum gain 3 dBi or less 2 dBi or less Directivity NoConnector RP-SMA-POperatingtemperature range

-20 to 65°C

Waterproof property

Not waterproof Water resistant (IPX6)

Dimensions 196 mm (including the connector)

83 mm (including the base stand)

Note1)Canonlybeusedincombinationwiththededicated antenna.

Note 2) When using an external antenna, we recommend aligning the direction of the antenna of the peer device and the direction of the antenna of this device to maintain communicationquality.

Note 3) To bring out the full performance of the roof top antenna, install it on top of a metal rectangle board that is at least 10 x 20 cm long.

Note4) Installantennasasfaraspossiblefrommetalobjects and other obstacles. The communication qualitymaydeteriorateiftheyareclose.

Compliant Standards•GX20(/CM2options),GP20(/CM2option),GM10(/

CM2 and /CS2 options)OnlyUSFCCstandardsandCSA/ULstandardsare supported.

•GM90PS(/Woption)CSA/UL standards are not supported.

2

All Rights Reserved. Copyright © 2017, Yokogawa Electric Corporation GS 04L51B01-42EN

Nov. 20, 2019-00

● Wireless Input Unit Support Function of the GX20/GP20/GM10 (CM1 option) (R4.02.01 and later)

Datacollectionandstatusmonitoringofwirelessinputunits are possible.•NumberofGX70SMconnections*

ModelMeasurement mode (GX/GP/GM)Normal High

speedDual interval

GX20-1/GP20-1/GM10-1 Max. 50 devices Max. 30 devices

GX20-2/GP20-2/GM10-1 Max. 96 devices Max. 50 devices

* Thenumberoftechnicallypossibleconnections varies depending on the wireless communication condition and the measurement/transmission interval.

•Autoconfigurationfunction Automaticallyconfiguresthewirelessinputunitdata

collection settings.• Wireless data dropout detection function Detectsdatacollectiondropoutsduetowireless

communication errors or the like.• Management, monitoring, and maintenance functions Displayswirelessinputunitinformation. Status monitoring and maintenance period

management are available.• Loop calibration function Wireless input data correction using the calibration

correction function•WebapplicationandHardwareConfiguratoralso

support wireless input unit functions.GX20/GP20/GM10（Mastre)

GX70SM

Wireless Network(PAN)

GX70SMMax. 96

GX70SM

Wireless input unit reconfiguration display

3


Nov. 20, 2019-00

HARDWARE SPECIFICATIONS● External dimensions

Unit: mm [approx. inch]

GX20When using the sleeve antenna

218.3(8.59) 376.1(14.81)

182.

75(7

.19)

When using the roof top antenna

19.8

5(0.

78)

190.3(7.49)

Unit: mm (approx. inch)Unless otherwise specified, tolerance is ±3% (however, tolerance is ±0.3 mm when below 10 mm).

Rear view

Reboot switchUSB port（mini B type）USB 2.0 compliant, for wireless communication configurationLEDStatus LED, ST1 (green/red), ST2 (green/red)Antenna connector

4


Nov. 20, 2019-00

Unit: mm [approx. inch]

GP20When using the sleeve antenna

206.

75(8

.14)

213.9(8.42) 342.7(13.49)


Unit: mm (approx. inch)Unless otherwise specified, tolerance is ±3% (however, tolerance is ±0.3 mm when below 10 mm).

46.0

5(1.

81)

185.9(7.32)

Rear view

Reboot switchUSB port (mini B type)USB 2.0 compliant, for wireless communication configurationLEDStatus LED, ST1 (green/red), ST2 (green/red)Antenna connector

5


Nov. 20, 2019-00

Unit: mm [approx. inch]GM10When using the sleeve antenna

183.3[7.22]

145 [5.71]

302.8 [11.92]


116.9 [4.60]Antenna connection port

Reboot switch

Status LEDST1 (green/red)ST2 (green/red)

USB port for 920 MHz wireless communication configuration

6


Nov. 20, 2019-00

MODEL AND SUFFIX CODES● GX20 Model and Suffix Codes

Model Suffix Code

Optional code Description

GX20 Paperlessrecorder(Panelmounttype,Largedisplay)

Type -1 Standard (Max. measurement channels: 100 ch)

-2 Largememory(Max.measurementchannels: 500 ch)

Displaylanguage

E English,degF,DST(summer/wintertime)

Optionalfeatures

/CM2 920 MHz wireless (Master) *1 *2 *3

● GP20 Model and Suffix Codes

Model Suffix Code


GP20 Paperlessrecorder(Portabletype,Largedisplay)

Type -1 Standard (Max. measurement channels: 100 ch)

-2 Largememory(Max.measurement channels: 500 ch)

Displaylanguage

E English,degF,DST(summer/winter time)

Powersupply 1 100 V AC, 240 V AC2 12VDC

Optionalfeatures /CM2 920 MHz wireless (Master) *1 *2 *3

*1 /C2and/C3and/CM2cannotbespecifiedtogether.*2 ThisproductcanonlybeusedintheUS.*3 IfyouspecifyCM2,youmustalsospecifythe

communication channel function (/MC option).

● GM10 Model and Suffix Codes

Model Suffixcode


GM10 DataAcquisitionModuleforSMARTDAC+GM

Type -1 Standard (Max. measurement channels: 100)

-2 Largememory(Max.measurement channels: 500)

Area E General— 0 AlwayszeroOptionalfeatures /CM2 920 MHz wireless (Master) *1 *2

/CS2 920 MHz wireless (Slave) *2

*1 IfyouspecifyCM2,youmustalsospecifythecommunication channel function (/MC option).

*2 /C3,/CM2,and/CS2cannotbespecifiedtogether.

● GM90PS Model and Suffix Codes

Model Suffix Code Optional code Description

GM90PS PowerSupplyModuleforSMARTDAC+GM

Type -1 Always–1Area N GeneralSupplyvoltage 1 100-240 V AC

2 12-28VDC*1Powersupplyconnection

D PowerinletwithUL/CSAcable

W Screw terminal (M4) (without power cable)

— 0 AlwayszeroOptionalfeatures /W For 920 MHz wireless *2

*1 OnlyW(Screwterminal(M4))isavailableforthepowersupplyconnection.

*2 TheonlypowersupplymodulethatcanbeusedwithGM10’s 920 MHz wireless communication (/CM2 and /CS2options)isGM90PS-1N1D0/WorGM90PS-1N2W0/W.

OPTIONAL ACCESSORIES (SOLD SEPARATELY)

Product Model/part no.

Sleeve antenna (indoor use) A1061ERRooftopantenna(indoorandoutdooruse,cablelength: 2.5 m)

A1062ER

Test Certificate (QIC, sold separately)QICisavailableforeachmodel.

User’s ManualProductuser’smanualscanbedownloadedfromthefollowingURL.YouwillneedAdobeReader7orlaterbyAdobeSystems.

URL: www.smartdacplus.com/manual/en/

TrademarksTheTCP/IPsoftwareusedinthisproductandthedocumentforthatTCP/IPsoftwarearebasedinpartonBSDnetworkingsoftware,Release1licensedfromTheRegentsoftheUniversityofCalifornia.SMARTDAC+isatrademarkofYokogawaElectricCorporation.Microsoft, MS, and Windows are trademarks or registered trademarks of Microsoft Corporation in the United States and other countries.PentiumisaregisteredtrademarkofIntelCorporation.Modbus is a registered trademark of Schneider Electric.KerberosisatrademarkofMIT.Bluetooth is a trademark or registered trademark of Bluetooth SIGInc.Othercompanynamesandproductnamesappearinginthisdocument are registered trademarks or trademarks of their respective holders.Thecompanyandproductnamesusedinthismanualarenotaccompaniedbytheregisteredtrademarkortrademarksymbols(®and™).

7


General GX20/GP20 (/CM2 option) 6SHFL¿FDWLRQV 920MHz ... · resume wireless communication. GM10...

Documents

Transcript of General GX20/GP20 (/CM2 option) 6SHFL¿FDWLRQV 920MHz ... · resume wireless communication. GM10...