GE FRAME 9E GAS TURBINE GENERATOR Plant Spec Data
-
Upload
murali-krishna -
Category
Documents
-
view
607 -
download
24
Transcript of GE FRAME 9E GAS TURBINE GENERATOR Plant Spec Data
PURCHASE SPECIFICATIONS
FOR
TWO (2) X USED 116.4 MW GE FRAME 9E GAS TURBINE
GENERATOR PLANTS
Offered For Immediate Sale By:
Land O’ Lakes, Florida October 23, 2009
CONFIDENTIAL OFFERING TO CLIENT CTG~GTF‐0322‐01 & GTF‐0322‐02 USED GE FRAME 9E PLANT PURCHASE SPEC. 06/01/09 Vers.0.0
2 | P a g e 17231 Camelot Court, Land O’ Lakes, Florida 34638 Tel: 813‐920‐8725 / Fax: 813‐343‐5754
Email: [email protected] Website: www.Camelottech.com
Overview
The Camelot Technologies Group, Inc. (CTG) http://www.camelottech.com. is a privately held energy and power generation equipment sales and services company formed in 1996, with its corporate headquarters located in Land O’ Lakes, Florida. CTG's mission is to offer buyers and sellers a dynamic and fluid exchange of high quality, new, refurbished and decommissioned utility equipment. CTG is the leading power equipment surplus repository, where buyers can easily find major utility components and ancillary equipment at below market prices. Sellers of non‐performing or decommissioned surplus assets are afforded maximum global exposure of their equipment and a comprehensive menu of turnkey professional services directed at quick and efficient disposition. CTG provides technical resources and engineering sales assistance for hard‐to‐find, quality electrical components and power generation systems such as turbines, generators and complete power plants. Buyers are matched with Sellers according to design, application and price. Over the last several years, CTG has built an outstanding reputation for integrity, and customer service. CTG has cultivated long‐term relationships in the energy community that serve our clients’ needs with personal attention and a deep understanding of their strategic and financial goals. CTG also offers full engineering, procurement and construction services through our partnership networks as the complete enterprise solution for independent merchant and distributed power developers. CTG is able to facilitate every phase of the transaction including shipping, financing, leasing, and warranty, insurance, dismantling and component certification, when applicable. GENERALLY This section provides the general description, scope of supply, and supplementary requirements for equipment, materials, and services included with these GE Frame 9E Gas Turbine Generator Plants. In general, American Standard specifications are quoted throughout the contract documents, but alternative internationally recognized standards may be substituted if approved in writing by purchaser.
CONFIDENTIAL OFFERING TO CLIENT CTG~GTF‐0322‐01 & GTF‐0322‐02 USED GE FRAME 9E PLANT PURCHASE SPEC. 06/01/09 Vers.0.0
3 | P a g e 17231 Camelot Court, Land O’ Lakes, Florida 34638 Tel: 813‐920‐8725 / Fax: 813‐343‐5754
Email: [email protected] Website: www.Camelottech.com
Two (2) X 116.4 MW GE Frame 9E Power Plants For Sale Two (2) EACH GE FRAME 9E, PG9161, MS9001 CTG is offering for immediate sale (2) each GE PG9161 Frame 9E Power Plant Packages. These units are 50 HZ, 116.4 MW, each Dual Fuel, Low Hours, Complete BOP, & Includes 2 Transformers. Date of Manufacture ‐ 1992 Total Hours Fired ‐ 15,000 Total Starts ‐ 800
Rated Output (Generator Terminals) MW 116.4 per Unit MS9001 RATINGS NATURAL GAS DISTILLATE BASE PEAK BASE PEAK
OUTPUT‐MW 116.4 125.7 14.2 123.3HEAT RATE‐Kcal/kWh (LHV) 2608 2598 2631 2621HEAT RATE‐ Btu/kWh (LHV) 0350 10310 10440 10400
CONFIDENTIAL OFFERING TO CLIENT CTG~GTF‐0322‐01 & GTF‐0322‐02 USED GE FRAME 9E PLANT PURCHASE SPEC. 06/01/09 Vers.0.0
4 | P a g e 17231 Camelot Court, Land O’ Lakes, Florida 34638 Tel: 813‐920‐8725 / Fax: 813‐343‐5754
Email: [email protected] Website: www.Camelottech.com
SCOPE OF SUPPLY
• Gas Turbine with essential auxiliaries
• Gas Turbine Control System Generator
• Starter Device and all auxiliary equipment
• Excitation and excitation control equipment
• Gas Supply line and valves from gas receiving station
• Gas Emergency stop valve, governor valve and actuators
• Gas Vent stack, Distillate supply pipeline and valves for connecting into overland supply
• Lubricating oil main pump
• AC driven pump, DC Driven pump, Jacking oil pump
• Lubricating oil tanks, filters, coolers and purifiers
• Clean oil tank and pipe work
• All pipework and valves for lube system
• Cooling water system including pumps, filters, coolers, fans, pipework and valves
• Air intake filters, silencer, ductwork and ancillary equipment
• Exhaust gas ductwork and silencer
• Exhaust stack, Auxiliary drive gear unit
• Automatic barring and inching gear
• Control oil supply including pumps, filters, valves, actuators and pipework
• Gas Generator protection equipment
• Plant supervisory and condition monitoring equipment
• Pressure, temperature, vibration and flow measuring instrumentation
• Local instruments, gauges, controls and panels
• Gas Turbine enclosure and ventilation equipment
• Gas Detectors and display panel
• Special maintenance tooling
• Full set of Manuals
• Plant drawings
CONFIDENTIAL OFFERING TO CLIENT CTG~GTF‐0322‐01 & GTF‐0322‐02 USED GE FRAME 9E PLANT PURCHASE SPEC. 06/01/09 Vers.0.0
5 | P a g e 17231 Camelot Court, Land O’ Lakes, Florida 34638 Tel: 813‐920‐8725 / Fax: 813‐343‐5754
Email: [email protected] Website: www.Camelottech.com
GE Frame 9E Gas Turbine Plant 2 EACH GE FRAME 9E, PG9161, MS9001
TECHNICAL SPECS
GAS TURBINE GENERAL DATA Gas Turbine Model PG9161 Power Output (Generator Terminals) MW 116.4 Efficiency (Referred to Generator Terminals) % 33 Rotor Speed RPM 3000 Direction of Rotation (looking from Generator)
CLOCKWISE
Number of Compressor Stages 17 Temperature at Air Intake °C 15 Atmospheric Pressure bar 1.013 Pressure Drop up to Compressor Inlet mbar 10 Compressor Pressure Ratio 11.6 Compressor Exhaust Temperature °C 343 Compressor Efficiency % PROPRIETARY Variable Geometry Stages 1 Air Bleed‐off Stages 2 Number of Combustion Chambers 14 Dual Fuel System Yes Fuel Nozzles/ Combustor 1 Ignition System Spark Plug Combustion Wall Temperature °C PROPRIETARY Fuel Consumption Kg/S 11.4 Method of NOx Reduction (Alternative Offer) WATER INJECTION Number of Turbine Stages 3 Date of Manufacture 1992 Total Fired Hours 15,000 Total Starts 800
CONFIDENTIAL OFFERING TO CLIENT CTG~GTF‐0322‐01 & GTF‐0322‐02 USED GE FRAME 9E PLANT PURCHASE SPEC. 06/01/09 Vers.0.0
6 | P a g e 17231 Camelot Court, Land O’ Lakes, Florida 34638 Tel: 813‐920‐8725 / Fax: 813‐343‐5754
Email: [email protected] Website: www.Camelottech.com
CONFIDENTIAL OFFERING TO CLIENT CTG~GTF‐0322‐01 & GTF‐0322‐02 USED GE FRAME 9E PLANT PURCHASE SPEC. 06/01/09 Vers.0.0
7 | P a g e 17231 Camelot Court, Land O’ Lakes, Florida 34638 Tel: 813‐920‐8725 / Fax: 813‐343‐5754
Email: [email protected] Website: www.Camelottech.com
CONFIDENTIAL OFFERING TO CLIENT CTG~GTF‐0322‐01 & GTF‐0322‐02 USED GE FRAME 9E PLANT PURCHASE SPEC. 06/01/09 Vers.0.0
8 | P a g e 17231 Camelot Court, Land O’ Lakes, Florida 34638 Tel: 813‐920‐8725 / Fax: 813‐343‐5754
Email: [email protected] Website: www.Camelottech.com
GE Frame 9E Gas Turbine Plant 2 EACH GE FRAME 9E, PG9161, MS9001
Generator Specifications
OUTPUT: KVA 150625 TYPE: BRUSH TURBO‐GENERATOR R/MIN: 3000 FRAME: BDAX9‐450PRH VOLTS: 14000 MACHINE NO: AMPS: 6211 RATING: CONTINUOUS P.F: 0.800 SPEC: BS 5000 PT II PHASES/HZ: 3/50 AMBIENT TEMP: 15.0°C PHASE CONN: STAR ALTITUDE: UP TO 1000 M EXCITER VOLTS: 180 COOLANT: WATER AT 24°C EXCITER AMPS: 1540 ROTOR INSULATION: CLASS F DATE: 1990 STATOR INSULATION: CLASS F
1. Distillate inlet. Sale will include tanks if wanted. 2. Gas termination at fire shut off valve on the upstream side (fuel gas meters are not
included). 3. Air inlets are included 4. Gas exhaust includes the chimneys. 5. Electrical termination.
A. 132/14KV Transformer on 132KV bushing. This allows synch on 3GO/4GO with Generator Transformer back energized.
B. Essential Services Boards 1 and 2 remain allowing purchaser to take Essential Services Boards 3 & 4.
C. Station Boards 1 and 2 remain allowing purchaser to take Unit Boards 3 and 4 D. Unit Transformers 3 and 4 are included in the sale. E. Generator Transformers 3 and 4 are included in the sale
CONFIDENTIAL OFFERING TO CLIENT CTG~GTF‐0322‐01 & GTF‐0322‐02 USED GE FRAME 9E PLANT PURCHASE SPEC. 06/01/09 Vers.0.0
ESTIMATED PERFORMANCE
GE FRAME 9E GAS TURBINE, PG9161, MS9001 BASE LOAD FUEL: NATURAL GAS ALTITUDE A‐ SEA LEVEL
MODE: SIMPLE CYCLE B‐500m INLET LOSS: 8.89cm H₂O C‐1,000m EXHAUST LOSS: 12.7cm H₂O D‐1,500m
9 | P a g e 17231 Camelot Court, Land O’ Lakes, Florida 34638 Tel: 813‐920‐8725 / Fax: 813‐343‐5754
Email: [email protected] Website: www.Camelottech.com
CONFIDENTIAL OFFERING TO CLIENT CTG~GTF‐0322‐01 & GTF‐0322‐02 USED GE FRAME 9E PLANT PURCHASE SPEC. 06/01/09 Vers.0.0
ESTIMATED PERFORMANCE
GE FRAME 9E GAS TURBINE, PG9161, MS9001 BASE LOAD FUEL: NATURAL GAS ALTITUDE A‐ SEA LEVEL
MODE: SIMPLE CYCLE B‐500m INLET LOSS: 8.89cm H₂O C‐1,000m EXHAUST LOSS: 12.7cm H₂O D‐1,500m
ESTIMATED PERFORMANCE 10 | P a g e
17231 Camelot Court, Land O’ Lakes, Florida 34638 Tel: 813‐920‐8725 / Fax: 813‐343‐5754 Email: [email protected] Website: www.Camelottech.com
CONFIDENTIAL OFFERING TO CLIENT CTG~GTF‐0322‐01 & GTF‐0322‐02 USED GE FRAME 9E PLANT PURCHASE SPEC. 06/01/09 Vers.0.0
GE FRAME 9E GAS TURBINE, PG9161, MS9001 BASE LOAD FUEL: DISTILLATE ALTITUDE A‐ SEA LEVEL
MODE: SIMPLE CYCLE B‐500m INLET LOSS: 8.89cm H₂O C‐1,000m EXHAUST LOSS: 12.7cm H₂O D‐1,500m
11 | P a g e 17231 Camelot Court, Land O’ Lakes, Florida 34638 Tel: 813‐920‐8725 / Fax: 813‐343‐5754
Email: [email protected] Website: www.Camelottech.com
CONFIDENTIAL OFFERING TO CLIENT CTG~GTF‐0322‐01 & GTF‐0322‐02 USED GE FRAME 9E PLANT PURCHASE SPEC. 06/01/09 Vers.0.0
ESTIMATED PERFORMANCE
GE FRAME 9E GAS TURBINE, PG9161, MS9001 BASE LOAD FUEL: DISTILLATE ALTITUDE A‐ SEA LEVEL
MODE: SIMPLE CYCLE B‐500m INLET LOSS: 8.89cm H₂O C‐1,000m EXHAUST LOSS: 12.7cm H₂O D‐1,500m
12 | P a g e 17231 Camelot Court, Land O’ Lakes, Florida 34638 Tel: 813‐920‐8725 / Fax: 813‐343‐5754
Email: [email protected] Website: www.Camelottech.com
CONFIDENTIAL OFFERING TO CLIENT CTG~GTF‐0322‐01 & GTF‐0322‐02 USED GE FRAME 9E PLANT PURCHASE SPEC. 06/01/09 Vers.0.0
FRAME SIZE: BDAX.9‐450 PRH ENCLOSURE: CACW
1. RATING Output MVA 150.625 at 34°C cooling air
Power Factor 0.8
Voltage kV 14
Frequency Hz 50 Speed rpm 3000
Specification BS5000 Pt.2 & IEC 34.3
2. REACTANCES to a base of 150.625MVA (Calculated) Synchronous Reactance Xdi 230%
Transient Reactance X'dr 22%
Sub‐Transient Reactance X''dr 13.4%
Negative Sequence Reactance X2i 16.25%
3. CURVES
Issue
Output/Coolant Temperature H.E.P. 7033 2
Reactive Capability Diagram H.E.P. 7381 1
Open Circuit/Short Circuit H.E.P. 7695 1
Efficiency H.E.P. 4512 5
Negative Sequence Capability H.E.P. 7694 1
4. RECOMMENDED ALARM AND TRIP SETTINGS Alarm Trip Alarm Trip
Stator Winding Temp °C 150 160 Exciter Air Outlet Temp °C 105 ‐
Bearing Oil Outlet Temp °C 87 90 Bearing Housing mm/sec *Vibration Peak Velocity in/sec Peak to Peak Displacement mm
9 0.35
0.1
19 0.75
0.15 T.P.J. Metal Temp °C 105 110
Generator Air Outlet Temp °C 105 ‐ Shaft Relative Vibration in X10ˉ³
*If vibration is measured in terms of amplitude:
4 6
Zero to peak amplitude (μm)= peak velocity (mm/sec) X 9550 / RPM
13 | P a g e 17231 Camelot Court, Land O’ Lakes, Florida 34638 Tel: 813‐920‐8725 / Fax: 813‐343‐5754
Email: [email protected] Website: www.Camelottech.com
CONFIDENTIAL OFFERING TO CLIENT CTG~GTF‐0322‐01 & GTF‐0322‐02 USED GE FRAME 9E PLANT PURCHASE SPEC. 06/01/09 Vers.0.0
TERMS AND CONDITIONS:
The Camelot Technologies Group, Inc. (CTG) is the seller and will facilitate all aspects of the equipment transaction. Additional services such as dismantling, shipping and installation are available through CTG and will be performed under separate contract. A Letter of Intent (LOI) to Purchase coupled with verifying the availability of funds is required. Buyer will be required to render a deposit of up to 20% of the total purchase price to secure the option to purchase and financial closing shall take place within 45 days of inspection and execution of Purchase Sale Agreement which ever event occurs earlier. Buyer will undertake removal and shipping at their own expense. CTG will quote removal, transportation and logistics separately. Removal must be completed within 90 days of closing. CTG makes no warranty or representation regarding the accuracy or correctness of the information contained herein. The responsibility for assessing the accuracy or correctness of that information resides with the buyer, his agent, designee, affiliates or those who may rely on that information. Conditions: "Subject to Availability". Therefore, this proposal is based on the attached terms and conditions:
Availability: Immediately Freight: FOB EUROPE
Inspection: Immediately Warranty: No Purchase: Immediately Delivery: At Buyer’s Convenience PRICE: PLEASE CONTACT US
PAYMENT TERMS
The following terms will secure the units immediately:
Letter of Intent
20% deposit required 48 hrs. after inspection and “Notice of Acceptance”.
Balance Due at Closing (within 45 days)
For more information please contact:
The Camelot Technologies Group, Inc. (CTG) 17231 Camelot Court Land O’ Lakes, FL 34638 Phone: (813) 920‐8725 / Fax: (813) 343‐5754 Email: [email protected] Website: http://www.Camelottech.com
14 | P a g e 17231 Camelot Court, Land O’ Lakes, Florida 34638 Tel: 813‐920‐8725 / Fax: 813‐343‐5754
Email: [email protected] Website: www.Camelottech.com
CONFIDENTIAL OFFERING TO CLIENT CTG~GTF‐0322‐01 & GTF‐0322‐02 USED GE FRAME 9E PLANT PURCHASE SPEC. 06/01/09 Vers.0.0
15 | P a g e 17231 Camelot Court, Land O’ Lakes, Florida 34638 Tel: 813‐920‐8725 / Fax: 813‐343‐5754
Email: [email protected] Website: www.Camelottech.com
CONFIDENTIAL OFFERING TO CLIENT CTG~GTF‐0322‐01 & GTF‐0322‐02 USED GE FRAME 9E PLANT PURCHASE SPEC. 06/01/09 Vers.0.0
16 | P a g e 17231 Camelot Court, Land O’ Lakes, Florida 34638 Tel: 813‐920‐8725 / Fax: 813‐343‐5754
Email: [email protected] Website: www.Camelottech.com
TERMS AND CONDITIONS OF SALE
GENERAL This document together with any additional documentation signed by Seller and Buyer represents the Agreement between the parties. These terms may not be modified except in writing signed by an authorized representative of Seller. Any terms and conditions submitted in Buyer's inquiry or purchase order shall be null and void unless specifically agreed to in writing signed by an authorized representative of Seller. Catalogs, circulars and similar pamphlets of Seller are provided for general information purposes only and are not a part of the Agreement. Except as expressly contained herein no representation or warranty is made as to performance, size, durability, or other specifications of Sellers products and any information contained in catalogs, circulars and similar promotional or advertising material is for general informational purposes only. TAXES/DUTIES Any sales, use or other similar type taxes or import or export duties imposed on this transaction are not included in the price. Such taxes and/or duties shall be billed separately to Buyer. Seller will accept a valid exemption certificate from Buyer if applicable; however, if such exemption certificate is not recognized by the governmental taxing authority involved and Seller is required to pay the tax covered by such exemption certificate, Buyer shall promptly reimburse Seller for the taxes paid. EXCUSABLE DELAYS Seller shall not be responsible for nonperformance or delays in performance occasioned by any causes beyond Seller's reasonable control, including, but not limited to labor difficulties, delays of vendors or carriers, Seller's prompt receipt of Buyer's equipment, Seller's compliance with Buyer's change orders, fires, acts of God, war, non-governmental actions and material shortages. Any delays occasioned by such circumstances shall affect a corresponding extension of Seller's performance dates. DELIVERY, TITLE AND RISK OF LOSS Delivery manifests and dates are approximate, and are based upon prompt receipt of approvals, receipt of equipment from Buyer or vendors (as may be appropriate), or otherwise prompt receipt of all necessary information. Unless otherwise specified by Seller, all shipments are F.O.B., Seller's facility. Full risk of loss (including transportation delays and losses) shall pass to Buyer upon delivery of products to the F.O.B. point, or if Seller consents to a delay in shipment at the request of Buyer, risk of loss shall pass to Buyer upon notification by Seller that equipment is ready for transport. WARRANTY These 9E CGT packages are sold As Is/Where Is without warranty unless specifically agreed to elsewhere and the effects of corrosion, erosion and normal wear and tear are specifically excluded and Seller will be held harmless. Seller will not be liable to Buyer for any loss or injury to persons or property (including the machinery which is the object of the work) caused in whole or in part by (1) the acts of Buyer or its agents, (2) failure to observe Seller's instructions, or (3) failure or malfunctioning of anything not furnished by Seller. The preceding paragraphs set forth the exclusive remedies for warranty claims, and upon the expiration of the warranty period, all such liability shall terminate. PAYMENT TERMS Payment terms are as indicated in the proposal. Invoiced milestone payments are due within thirty days of invoice date. If the order is placed from outside the United States, an irrevocable letter of credit will be required, drawn on a bank acceptable to Seller for the amount of the order. Payment will be drawn against the letter of credit. Payment received thirty days after the invoice date is subject to interest charges at the maximum allowable rate as provided by applicable law. LIMITATION OF LIABILITY Seller shall in no event be liable to Buyer or any successor for any consequential, incidental, or indirect damages arising out of this prospectus or any breach thereof, including but not limited to damages resulting from: loss of use, profits, revenue, interest or goodwill; work stoppage, impairment of other goods, shutdown or non-operation, increased expenses of operation; cost of purchase of replacement power, or claims of Buyer or customers of Buyer for service interruption whether or not such loss or damage is based on contract, indemnity, tort, product or strict liability or otherwise.
THE REMEDIES OF BUYER SET FORTH HEREIN ARE EXCLUSIVE. THE TOTAL LIABILITY OF SELLER WITH RESPECT TO THE PERFORMANCE OR BREACH OF THIS AGREEMENT WHETHER BASED ON CONTRACT, INDEMNITY, TORT, PRODUCT OR STRICT LIABILITY OR OTHERWISE, SHALL NOT EXCEED THE CONTRACT PRICE OF THE AGREEMENT OR THE PART UPON WHICH SUCH LIABILITY IS BASED.
ASSIGNMENT Neither party shall assign or transfer the intended LOI without the prior written consent of the other party, which shall not be unreasonably withheld. GOVERNING LAW The rights and obligations of the parties shall be governed by the laws of the State of Florida, excluding conflict of laws provisions.