P,-\

OFFICE OF THE PRINCIPAL, GANDHAMARDAN ITI, BOLANGIR

r". Q1(iot. ?o'l'rY

Sealed Quotations are invited from registered firms/ Suppliers for supply of Equipments &Machineries for Electrica! Trade & Fitter Trade of Gandhamardan lTl, Bolangir, At- Larkipali, po-

Rajendra College, Dist- Bolangir-767002 for the year 2013-14 as per the package available inwww. dtetorissa.gov. i n a nd www. bala ngir. n ic. in

The sealed Package wise quotations should reach the under singed on or beforeL2.O2.20L4 from the date of publication of advertisement before 4 PM positively either in personor by speed post, Super scribing under envelop quotation for supply of Equipments &Machineries for Electrical Trade & Fitter Trade of Gandhamardan lTl, Bolangir package No. TheQuotation will be opened at 11 AM on 13.o2.2014 in the chamber of the principal, GandhamardanlTl, Bolangir in the presence of the quotationers or their authorized agents. Any euotation not fullfilling any of the component/specifications mentioned above shall not be entertained.

The authority reserves all rights to accept or reject the quotations without assigning anyreason thereof.

Terms & Conditions.

1. Sealed quotations should be submitted either in person or by speed post.2. The Xerox copy of VAT Clearance form (VAT 6L2) income Tax Clearance should be enclosed

with the quotation.

3. The rate of each items should include all taxes.

4. Packing & Transport (door delivery), lnsurance & other charges if any.5. The delivery of the goods shou ld be made within one month from the date of purchase

order.

6. For any query contact Mobile No- 889558L476.

k{HPrincif al

Gandhamardan lTl

Bolangir

Memo No. dt

Copy to the Principal, lTl, Bolangir/ General Manager, D.l.C.Bolangir/ District EmploymentOfficer, Bolangir/ Bolangir NlC, Web site with a request to kindly display in their Notice Board forwide circulation & publicity. You are requested to present on the opening date & Time mentionedabove.

ffir'rGandhamardan lTl,

Bolangir

uotation Call

I -2-

PACKAGE.IELECTRICAL TRADE

TOOL KITSl No.

SyllabusSl. No.

Name of the items quantity

7 1 Steel Tape, 10 m length l-7 Nos.

2 2 Plier lnsulated, 1-50 mm l-7 Nos.

3 3 Plier Side Cutting, 150 mm l-7 Nos.

4 4 Screw Driver, 100 mm 17 Nos.

5 5 Screw Driver, 150 mm 17 Nos.

6 6Electrician Connector, screw driver insulated handle thin stem,100 mm

17 Nos.

7 7 Heavy Duty Screw Driver, 200 mm 17 Nos.

8 8 Electrician Screw Driver thin stem insulated handle, 250 mm 17 Nos.

9 9 Punch Centre, L50 mm X 9 mm 17 Nos.

10 10 Knife Double Bladed Electrician 17 Nos.

L7 1,L Neon Tester 17 Nos.

12 L2 Steel Rule 300 mm l-7 Nos.

13 13 Hammer, cross peen with handle L7 Nos.

L4 14 Hammer, ball peen With handle 17 Nos.

15 15 Gimlet 6 mm. l-7 Nos.

16 L6 Bradawl 17 Nos.

L7 17 Scriber (Knurled centre position ) l-7 Nos.

18 18 Pincer 1-50 mm 17 Nos.

Wu"Pr incii''al"

Grndhau,ir I dau, I.T.I.Bo:angir

1-)

PACKAGE.IIELECTRICAL TRADE

Sl No.SyllabusSl. No.

Name of the items Quantity

1 C- Clamp 200 mm, 150 mm and 100 mm 2 Nos

1. C- Clamp 200 mm, 150 mm and 100 mm 2 Nos

2 C- Clamp 200 mm, 150 mm and 100 mm 2 Nos

3 2Spanner Adjustable 150 mm, 15 degree 2 Nos each

4 ., Blow lamp 0.5 ltr 1No

5 4 Meltine Pot lNo6 5 Ladel lNo

7 6 Chisel Cold firmer 25 mm X 200 mm 2 Nos

8 7 Chisel 25 mm 2 Nos

9 Chisel 6 mm 2 Nos

10 8 Hand Drill Machine 0 to 6 mm capacity 1No

1.1 9 Portable Electric Drill Machine 6 mm capacity 1No

12 10 Pillar Electric Drill Machine 12 mm capacity 1No

13 11 Allen Key 1 set

1.4 t2 Oil Can O.l2ltr lNo

15 13 Grease Gun 1No

16 l4 Out Side Micrometer 0 to 25 mm 2 Nos

77 15 Motorised Bench Grinder 1No

18 t6 Rawl plus tool & bit 2 set

19 t7 Pully Puller 2 Nos

20 18 Bearing Puller 2 Nos

21 19 Hygrometer 1 set

22 20 Thermometer 0 to 100 deg CentigrL 1No

23 21 Scissors blade 150 mm 4 Nos

24 22 Crimoins Tool 2 sets

25 23 Wire stripper 20 cm 2 Nos

26 24 Chisel Cold flat 12mm 2 Nos

27 25 Mallet hard wood 0,50 kg 4 Nos

28 26 Hammer Exeter type 0.40 kg 4 nos

2921

Hacksaw frame 200 mm adjustable 2 Nos

30 Hacksaw frame 300 mm adiustable 2 Nos

31 28 Trv Square 150 mm blade 4 nos

3229

Outside Divider CalliPer 2 Nos

33 Inside Divider Calliper 2 Nos

34 30 Pliers flat nose 150 mm 4 Nos

35 31Pliers round nose 100 mm 4 Nos each

36 32 Tweezers 100 mm 4Nos

37 aaJJ

Snip Straight & Bent 150 mm 2 Nos

38 Snio Straieht & Bent 150 mm 2 Nos

YA{r\

\p-Y

PACKAGE.IIIELECTRICAL TRADE

SL No.SyllabusSl Nn

Name of the items Quantity

1 34 D.E. metric Spanner 2 Nos

2 35 Drill hand brace 0 to 100 mm 4 Nos

3 36 Drill S.S. Twist block 2 mm,5 mm 6 mm set of 3 4 set

4 37 Plane, smoothing cutters 50 mm 4 Nos.

5 38 Gauge, wire imperial 2 Nos

6 39 File flat 200 mm 2nd cut 8 Nos.

7 40 File half round 200 mm 2nd cut 4 Nos

8 4L File round 200 mm 2nd cut 4 Nos.

9 42 File flat 150 mm rough 4 Nos.

10 43 File flat 250 mm bastard 4 Nos.

1,1 44 File flat 250 mm smooth 4 Nos.

t2 45 File Rasp, half round 200 mm bastard 4 Nos

13 46 Soldering lron 25 watt 4 Nos

L4 Soldering lron 65 watt 4 Nos

1s Soldering lron 125 watt 4 Nos

1,6 47 Copper bit soldering iron 0.25 kg. 4 Nos.

17 48 Desoldering Gun 4 Nos

18 49 Hand Vice 50 mm jaw 4 Nos

19 50 Table Vice 100 mm jaw 8 Nos

20 5L Pipe Cutter to cut pipes upto 5 cm. Dia 4 Nos

21 52 Pipe Cutter to cut pipes above 5 cm dia 2 Nos

22 53 Stock and Die set for 20 mm to 50 mm G.l. pipe L set

Gandhar.r:,iatr I.?J.8., ii ulif

\l-r

PACKAGE.IVELECTRICAL TRADE

Sl No.Syllabus

Sl. No.

Name of the itemsQuantity

1 54 Ohm Meter; Series Type 2 Nos

2 Ohm Meter; Shunt Type 2 Nos

2 55 Stock and Dies conduit 1No

3 56 Multi Meter (analog) 0 to 1000 M Ohms, 2.5 to 500 V 2 Nos

4 57 Digital Multi Meter 6 Nos

5 58 A.C. Voltmeter M.l. 0 -500V A.C 1No

6 59 Milli Voltmeter centre zero 100 - 0 - 100 m volt 1No

7 60 D.C. Milliammeter 0 -500m A 1No

8 61 Ammeter MC 0-5 A 1No

9 Ammeter MC 0- 25 A 1No

10 62 A.C. Ammeter M.1.. 0-5A LNo

1,1, A.C. Ammeter M.l. 0-25 A LNo

12 63 Kilo Wattmeter 0-1-3 kw LNo

13 64 A.C. Energy Meter,Single phase 5 amp. 1No

L4 A.C. Energy Meter. Three Phase 15 amp LNo

15 65 Power Factor Meter 1No

1"6 66 Frequency Meter 1No

L7 67 fachometer with watch 1No

18 68 urrent Transformer 1No

1"9 69 Potential Transformer 1No

20 70 Growler 1No

21 71 Iong Tester I Clamp Meter 0 - 100 amp. AC 1No

22 l2 Megger 500 volts 1No

23 t3 Wheat Stone Bridge with galvanometer &battery 1No

24 74 Contactor 3phase, 440volt,16amp lNo25 auxiliary contacts 3phase, 440volt, 16amp 1No

26 75 Contactor 3 phase, 440 volt, 32 amp. lNo27 Auxiliary contacts 3 phase, 440 volt, 32 amp. lNo

28 16 Limit Switch iNo

29 78Rotary Switch 16 A 1No

30 19 Load Bank5 KW( Lamp lheater Type) iNo

3180

Brake Test amangement with two spring balance 0 to 25 kg rating lNo

32 81 Knife Switch DPDT fitted with fuse terminals 16 amp 4 Nos

3382

Knife Switch TPDT fitted with fuse terminals 16 amp4 Nos

Y kl

\

Q-6

ELECTRICAL TRADE

Sl No.Syllabus

Sl. No.

Name of the itemsQuantity

3483

DC Power Supply 1No

35

84

lnverter- 1 KVA wilh l2 V Banery

1NoInput- 12 volt DC,

Output- 220 volt AC

36

85

Voltage Stabiliser

1NoInput: 150 - 230 volt AC

Output: 220 volt AC

86

Rheostat

37 0 -1 Ohm, 5 Amp lNo

38 0 -10 Ohm, 5 Amp 1No

39 0- 25 Ohm, 1 Amp 1No

40 0- 300 Ohm, 1 Amp lNo

8l

Domestic Appliances -4L a. Electric Hot Plate 1500 watt 1No

42 b. Electric Kettle, 100 watts 1No

43 c. Electric Iron 1200 watts 1No

44 d. Immersion Heater 500110012000 watt 1No

45 e. A.C. Fan lNo

46 f. Geyser (Storage type) 15 ltr minimum 1No

47 g. Mixture & Grinder 1No

48 88 Flux meter lNo

49 89 Laboratory Type Induction Coil 1no

50 90 3- point D.C. Starter 1no

51 9l 4- point D.C. Starter 1no

92

Relavs-

52 a. Cut out 1No

53 b. Reverse current 1No

54 c. Over current 1No

55 d. Over load 1No

56 Under voltage 1No

93

Starters for 2 to 5 H.P. A.C Motors-

57 a. Resistance type starter lNo

58 b. Direct on line Starter lNo

59 c. Star Delta Starter- manual, semi-automatic and automatic lNo

60 d. Auto Transformer type 1No

0-?

+!

l

I

I

PACKAGE-V

ELECTRICAL TRADE

Sl No.SyllabusSl Na

Name of the items Quantity

1 94

Electrical Machine Trainer -1 forS

(4+4) Units

Suitable for demonstrating the construction and functioning of different types

of DC machines and AC machines (single phase and three phase). Should be

fitted with friction brake arrangement, dynamo meter, instrument panel and

Dower supplv units

2 95

Motor-Generator (AC to DC) consisting of :

1No

Squirrel Cage lnduction Motor with star delta starter and directly coupled to DC

shunt generator and switch board mounted with regulator, air breaker,

ammeter, voltmeter, knife blade switches and fuses, set complete with case

iron and plate, fixing bolts, foundation bolts and flexible coupling.

nduction Motor ratins:7 HP, 400V, 50 cycles, 3 phase

DC Shunt Generator rating:

5 KW,44OV

3 95

Motor Generator(DC to AC) set consisting of

LNo

Shunt Motor with starting compensator and switch directly coupled to AC

generator with exciter and switch board mounted with regulator, breaker,

ammeter, voltmeter frequency meter, knife blade switch and fuses etc. Set

complete with cast iron bed plate, fixing bolts, foundation bolts and flexible

rorrnlinpShunt Motor ratinq :

5 HP, 44OV

AC Generator rating :

3-Phase, 4 wire, 3.5 KVA, 4OO|23O Volts, 0.8 pl 50cycles

4 97 Used DC Generators-series, tvpe for overhauling practice 1-No

5 Used DC Generators- shunt type for overhauling practice LNo

6 Used DC Generators- compound type for overhauling practice 1No

7 98 D.C. Shunt Generator with control panel, 2.5 KW, 230 V 1No

8 99D.C. Compound Generator with control panel including fitted rheostat,

voltmeter, ammeter and breaker, 2.5 KW, 230 V1No

9 100

Diesel Generator Set with change over switch, over current breaker and water-

cooled with armature, star-delta connections 1No

AC 3 phase, 5 KVA, 230 volt

10 L01DC Series Motor coupled with mechanical load 1No0.5 to 2 HP, 220 Volts

11 LO2DC Shunt Motor 1No2 to 3 HP, 220 volts

L2 103

DC compound Motor with starter and switch

1No2 to 3 HP, 220 volts

=",4fl"

-{-

(^

ELECTRICAL TRADE

rSl No.

SyllabusSl Nn

Name of the items Quantity

13 LO4

AC Squirrel Cage Motor with star delta starter and triple pole iron clad switch

fuse. 1No2 to 3 HP, 3-phase ,400 volts,

50 cvcles

1.4 105

AC phase-wound slip ring Motor with starter and switch1No5 HP, 400 volts, 3-phase,

50 cvcles

L5 106A.C. Series type Motor with mechanical load 1No% HP,23OV,50 cycles

1.6 LO7Sinele Phase Capacitor Motor with starter switch 1No1 HP 230 volt 50 cvcles

L7 108Universal Motor with starter/switch 1No230 volt, 50 cycles % HP

18 109 Stepper Motor with Dieital Controller LNo

19 110 Shaded Pole Motor 1No

20 rtt Sinsle phase Transformer, core tvpe, air cooled 1No

21 L12 Three phase transformer, shell type oil cooled 1No

22 113 Variable Auto Transformer 1No

23 tL4 Oscilloscope l- NoDual Trace,3O MHZ

24 115 Function Generator 1No

25 1,L6 Discrete Component Trainer LNo

26 7L7 Linear l.C.Trainer 1No

27 118 Dieital l.C.Trainer 1No

28 1,19 Bath lmpresnatins 1No

29 120 Oven Stove LNo

30 721 OilTestine Kit 1No

31 122 Battery Charger LNo

32 723 Hydrometer 1No

33 L24Air Breaker 1No5 KVA

34 125Miniature Breaker 1NoL6 amp

35 L26Thyristor/IGBT controlledarrangement.

D.C. motor drive with tacho-generator feedback1No

1- HP

36 L27Thvristor/IGBT controlled A.C. motor drive with WVF control 1No3 Phase, 2 HP

37 128Workins Bench 4 Nos2.5mxL2Amx0.75m

38 129 Fire Extinsuisher 2 Nos

39 130 Fire Buckets 2 Nos

40 131Metal Rack 4 Nos100cmx150cmx45cm

<-) 7rt\

?-1

PACKAGE.Ir A:Traineeskit

FITTER TRADE

,L-_ (WPrieclfal.

Gandhamardan l.!tr.E"Bular;gil

Name of the items QtvSl No.

Syllabus

Sl. No.

17 nos.1 1

Try Square 10 cm blade.

Caliper inside 15 cm sPring.

L7 nos.2 2

17 nos.3 3

4 4 Caliper l-5 cm hermaPhrodite l-7 nos,

5 5 Caliper outside 15 cm sPring l-7 nos.

6 6 Divider 15 cm spring

Straight Scriber 15 cm.

Centre Punch L0 cm

Screw driver L5 cm

Chisel cold flat 10 cm

Hammer ball peen 0.45 kg. With handle

17 nos.

17 nos.7 7

17 nos.8 8

17 nos.9 9

17 nos.10 10

17 nos.1t 11.

Hammer ball peen O.22kg. With handle. 17 nos.72 L2

File flat 25 cm. second cut

File flat 25 cm. smooth

File half round second cut L5 cm.

Hacksaw frame fixed 30 cm.

Safety goggles.

17 nos.L3 13

17 nos.L4 1,4

l-7 nos.15 15

l-7 nos.16 L6

L7 nos.t7 L7

18 18 Dot slot punch l-0 cm. 17 nos.

f -ro

1

iPACKAGE.IIFITTER TRADE

Sl No.SyllabusS

l. No.Name of the items Qtv

1 t9 Steel Rule 30 cm 4 nos.

2 20 Steel Rule 60 cm. 4 nos.

3 2L Straight edge 45 cm steel 2 nos.

4 22 Surface plate 45 x 45 cm Cl / Granite. 2 nos.

5 23 Marking table 91 x 9l- x 122 cm. 1 no.

6 24 Universal scribing block 22 cm. 2 nos.

7 25 V-Block pair 7 cm and 15 cm with clamps 2 nos.

8 26 Square adjustable 15 cm blade. 2 nos.

9 27 Angle plate 10 x 20 cm. 2 nos.

10 28 Spirit Level 15 cm metal l- no.

1.\ 29 Punch letter 3 mm set. L no.

12 30 Punch number set 3 mm. 1 no.

13 31 Punch hollow 6 mm to 19 set of 5 2 nos.

1.4 32 Punch round 3mm x 4 mm set of 2 2 nos.

15 33 Portable hand drill (Electric) 0 to 6 mm 2 nos.

1,6 34 Drilltwist straight shank 1.5 to l-2 mm by 0.5 mm l- Set

17 35 Drill twist straight shank 8 mm to 15 mm by % mm 1 Set

18 36 Taps and dies complete set in box B.A 1 no.

19 37 Taps and dies complete set in box with-worth. L no.

20 38 Taps and dies complete set in box 3-18 mm set of 10 L no.

21 39 File warding 15 cm smooth 4 nos.

22 40 File knife edge 15 cm smooth 4 nos.

23 4t File cut saw l-5 cm smooth 4 nos.

24 42 File feather edge 15 cm smooth 4 nos.

25 43 File triangular 15 cm smooth 2 nos.

26 44 File round 20 cm second cut 8 nos.

27 45 File square 15 cm second cut 4 nos.

28 46 File square 25 cm second cut 4 nos.

29 47 Feeler gauge 10 blades 1 set

30 48 File triangular 20 cm second cut. B nos.

31 49 File flat 30 cm second cut. B nos.

32 50 File flat 20 cm bastard B nos.

33 51 File flat 30 cm bastard. 8 nos.

34 52 File Swiss type needle set of 12. 2 sets

11-\\\

r

Sl No. SyllabusS Name of the items Qty

35 53 File half round 25 cm second cut. 8 nos.

36 54 File half round 25 cm bastard. 4 nos.

37 55 File round 30 cm bastard. 4 nos.

38 56 File hand 15 cm second cut. 8 nos.

39 57 Card file. 8 nos.

40 5B Oilstone L5 cm x 5 cm x 2.5 cm 4 nos.

41 59 Stone carborandum l-5 cm x 5 cm x 5 cm x 4 cm' 2 nos.

42 60 Oil Can 0.25 liters, 2 nos.

43 61 Pliers combination 15 cm 2 nos.

44 62 Soldering lron 350 gm. 2 nos.

45 63 Blow Lamp 0.50 liters. 2 nos.

46 64 Spanner D.E. 6 -26 mm set of 10 Pcs. 8 nos.

47 65 Spanner adjustable l-5 cm 2 nos.

48 65 lnterchangeable ratchet socket set with a L2 mm driver, l- set

49 67 Box spanner set 6-25 mm set of 8 with Tommy bar' l- set

50 68 Glass magnifying 7 cm 2 nos.

51 69 Clamp toolmaker 5 cm and 7.5 cm set of 2. 2 nos.

52 70 Clamp "C" 5 cm 2 nos.

53 71 Clamp "C" 10 cm 2 nos.

54 72 Hand Reamer adjustable cover max 9 ,!Z,!Bmr-' - set of 3 1 set

55 73 Hand Reamer taper 4 -9mm set of 6 OR 4 -7 mm set of 4' 1 set

56 74 Reamer parallel L2 - t6mm set of 5. 1 no.

57 75 Scraper flat l-5 cm. 8 nos,

58 76 Scraper triangular L5 cm 8 nos.

59 77 Scraper half round 15cm B nos.

Gaadhar:,r r tjirilfioiangir

r.T.t.

I -\LPACKAGE-IIIFITTER TRADE

Sl No.SyllabusS

l. No.Name of the items Quantity

L 78 Chiselcold 9 mm cross cut 9 mm diamond. 8 each

2 79 Chisel cold 19 mm flat 8 nos.

3 80 Chisel cold 9 mm round noze, 8 nos.

4 81 Stud Extractor EZY - out 2 nos.

5 82 Combination Set 30 cm. 2 nos.

6 83 Micrometer 0 - 25 mm outside. 3 nos.

7 84 Micrometer 25 - 50 mm outside. 3 nos.

8 85 Micrometer 50 -75 mm outside. 2 nos.

9 86 Micrometer inside 25 - 50 mm with extension rods. 1 no.

L0 87 Vernier caliper 15 cm 1 no.

L1 88 Vernier height gauges 30 cm. L no.

L2 89 Vernier bevel protractor. l- no.

13 9o Screw pitch gauge. 1 no.

1.4 97 Wire gauge, metric standard. 1 no.

15 92 Drill twist Taper Shank L2 mm to 25 mm x 1.5. 1 Nno.

L6 93 Drillchuck 12 mm. 1 no.

17 94 Pipe wrench 40 cm 1 no.

1_8 95 Pipe vice 100mm 1 no.

r.9 96Adjustable pipe tap set BSP with die set cover pipe size 15,20,

25,32,38,50 mm.1 no.

20 97 Wheel dresser (One for 4 units). 1 no.

21 98 Machine vice 10 cm. 1 no,

22 99 Machine vice l-5 cm 1 no.

23 1.00 Sleeve drill Morse O-L,L-2,2-3. 1 Set

24 101 Vice bench 1-2 cm jaws. 16 nos.

25 102 Vice leg 10 cm jaw. 2 nos.

26 1_03 Bench working 240 x \20 x 90 cm. 4 nos.

27 LO4 Almirah 180 x 90 x 45 cm. 2 nos.

28 105 Lockers with 6 drawers (standard size). 2 nos.

29 106 Metal rack 182 x 182 x 45 cm 1 no.

30 L10 Fire extinguisher (For 4 Units) 2 nos.

31 LLT Fire buckets. 2 nos.

32 L72 Machine vice 100mm. 2 nos.

33 113 Wing compass 25.4 cm or 30 cm. 2 nos.

34 1,1,4 Hand hammer 1 kg. with handle. 2 nos.

? ^rv

PACKAGE.IVFITTER TRADE

Sl NoSyllabus

Sl.No.Name of the Tools & Equipment Quantity

1*1. Slip Gauge as iohnson metric set. 1 Set

2 2 Carbide Wear Block 1 mm - 2 mm. 2 each

3*3. Gauge snap Go and Not Go 25 to 50 mm by 5mm. Set of 6 pcs. 1 Set

4*4. Gauge plug single 3 ended 5 to 55 by 5 mm. Set of 1L pcs. 1 Set

5* *5. Gauge telescopic upto L50 mm. 1 no.

6 6 Dial test indicator .01- mm on stand 1 no.

7 7 Sine bar 125 mm. L no.

8 8 Sine bar 250 mm. l- no.

9 9 Lathe tools H.S.S. tipped set. 2 nos.

10 10 Lathe tools bit 6 mm x 75 mm. 4 nos.

1,1. 11, Lathe tools bit 8 mm x 75 mm. 4 nos.

12 12 Lathe tools bit l_0 mm x 85mm. 4 nos.

13 13 Arm strong type tool bit holder R.H. 2 nos.

1.4 L4 Arm strong type tool bit holder L.H. 2 nos.

15 15 Arm strong type tool bit holder straight. 2 nos.

15 1.6 Stilson wrenches 25 cm 2 nos.

17 17 Pipe cutter 6 mm to 50 mm'wheeltype. l- no.

18 18 Pipe bender spool type up to 25 mm. with stand manually operated. 1 no.

19 19 Adjustable pipe chain tonge to take pipes up to 300 mm. L no.

20 20 Adjustable spanner 38 cm long. 1 no.

21**2L. Dial vernier caliper 0 - 200 mm LCO 0.05 mm. (Universal type). L no.

22**22. screw thread micrometer with interchangeable 0-25mm. pitch anvils for

checking metric threads 60.L no.

23 23 Depth micrometer 0-25 mm. 0.01 mm. L no.

24 **24. Vernier caliper 0-L50 mm. L.C. 0.02 mm. l- no.

25 * *25. Comparators stand with dial indicator LC 0.01mm. 1 no.

26 26 Engineer's try square (knife-wedge) 150 mm blade. 1 no.

27 **27 Surface roughness comparison plates N1-Ni.2 grade 1 Set

Grndhariardan I.T.I.Bolangir

{II

PACKAGE.VFITTER TRADE

Sl NoSyllabus

Sl. No.Name & Description of Machines Quantity

1 * l_.

Lathe all geared head stock S.S. and S.C. height of centre over bed

15 cm - gap head complete with accessories e.g. pump, all fittingsand splash guard driving plate with drives, face plate 3 jaw and 4jaw chucks fixed and travelling steady compound turret tool post,

taper turning attachment, fixed and running centres, driving dogs

straight and bent tails.

2 Nos.

2 2Drilling machine pillar sensitive 0-20 mm cap with swivel tablemotorised with chuck & key.

1 no.

3 3Drilling machine bench sensitive 0-12 mm cap motorised with chuckand key.

2 nos.

4 4 Forge portable hand blower 38 cm to 45 cm. 1 no.

5 5

Grinding machine (General purpose) D.E. pedestal with 2 cm. dia

wheels rough and1 no.

smooth with twist drill grinding attachment.

Bolangir

PACKAGE.VIFITTER TRADE

Name & DescriPtion of Machines

Transformer welding set 150 amps. - continuous welding current,

with all accessories and electrode holder

welder cable to carry 200 amps. with flexible rubber cover

QuantitYSlNoSyllabus

Sl. No.

1 Set1. 1,

20 Meter2 2

l-2 Nos.3 3 Lungs for cable

Earth clamps. 2 Nos.4 4

1 No.5 5

Arc welding table (all metal top) L22 cm X l-2 cm X 60 cm with

positioner.

1 Set.6 6

Oxy - acetylene gas welding set equipment with hoses' regulator and

other accessories.

Gas welding table with Positioner

Welding torch tips of different sizes

Gas lighter.

II

lTrolley for gas cylinders.

1No7 7

1- Set8 8

2 Nos9 9

l- No10 10

2 Nos1.1 LL Chipping hammer.

Gloves (Leather) 2 Pairs\2 L2

2 Nos13 13 Leather apron.

Spindle key for cylinder valve'

Welding torches 5 to 10 nozzles.

Welding goggles

I

lwetdine helmet with coloured glass

I

Itip cleaner

2 Nos.1,4 1.4

1 Set.L5 15

4 Pairs.16 L6

2 Nos.17 !7

10 Sets,18 18