FX Family PLCs - MEW de Venezuela · 2013. 1. 23. · The FX1N is an introductory micro PLC meant...
Transcript of FX Family PLCs - MEW de Venezuela · 2013. 1. 23. · The FX1N is an introductory micro PLC meant...
-
Mitsubishi Electric Automation | Programmable Logic Controllers FX Family 127
Programmable Logic ControllersFX Family
FX Family Overview ......................................................................................................................................128
Main Unit Overview ......................................................................................................................................130
Main Unit Configuration ..............................................................................................................................133
Configuration Rules......................................................................................................................................137
Programming Specifications ......................................................................................................................138
Environmental Specifications......................................................................................................................139
Main Unit Options ........................................................................................................................................140
FX Input/Output Extension Options............................................................................................................144
FX Analog Options........................................................................................................................................146
FX High-Speed I/O and Positioning Expansion Options ..........................................................................148
FX Communication and Networking Expansion Options ........................................................................150
FX Interfaces and Power Supplies ..............................................................................................................152
Alpha Sequence Controller..........................................................................................................................155
Software ........................................................................................................................................................158
Stock Product: Stock product is product MEAU makes every effort to have on hand for immediate shipment. There may be instances when we are out of stock due to unexpected large requirements. All stock product will be indicated in this book by an “S” in the Stocked Item columns/rows.
Non-Stock Product: Non-stock product is product supplied on an “as-needed” basis. Standard lead times of 12 – 16 weeks apply, product is non-returnable and non-cancelable. Product listed as non-stock may change to stock product subject to increases in sales and usage. All non-stock product will be indicated in this book bya dash “–” in the Stocked Item columns/rows.
F1-FX 2009 3/27/09 5:44 PM Page 127
-
128
nP
RO
GR
AM
MA
BL
E L
OG
IC C
ON
TR
OL
LE
RS
FX
FA
MIL
Y
The FX Family
The FX family of PLCs is highly flexible, enabling fast and efficient configuration for the application at hand. It is the ideal choice for simple controlsystems requiring up to 34 I/O (FX1S), or a more complex system with up to 384 I/Os (FX3U).
High-Speed ControlAll FX Series PLCs are equipped with built-in open collector high-speed counters. These high-speed inputs are connected to external devices suchas encoders and ultrasound sensors for system feedback control.
FX Control SolutionsFX PLCs have been designed to be used in a variety of industry areas with a focus on compact applications. With over 9,000,000 PLCs soldworld wide, the FX PLCs have been fitted to variety of applications in a range of different industry areas. Examples of a few industries whereFX PLCs are used include timber industry, food industry, textile industry plastics industry, printing industry, packaging industry and waterprocessing industry.
FX Standards Compliance: All FX products are manufactured under ISO 9000 quality assurance and 14001 environmental managementstandards. In addition, most FX PLC products are certified by internationally recognized standards agencies. The “Ratings” section of thespecifications tables lists the approvals for each product. The approval agencies are as follows:
UL, cUL: Underwriter’s Laboratories and ABS: American Bureau of Shippingcorresponding Canadian approvals RINA: Registro Italiano Navale
CE: Complies to the European EMC and LVD directives BV: Bureau VeritasDNV: Det Norske Veritas NK: Nippon Kaiji KyokaiLR: Lloyd’s RegisterGL: Germanischer Lloyd
Model FX1S FX1N FX3G FX3U FX3UC
Power Supply 100-240 VAC, 24 VDC 100-240 VAC, 12 - 24 VDC 100-240 VAC 100-240 VAC, 24VDC 24VDC
Maximum I/O 30 128 256* 384* 384*
Digital I/O Relay/Transistor Relay/Transistor Relay/Transistor Relay/Transistor Relay/Transistor
Cycle Period / LogicalInstruction 0.55 µs 0.55 µs 0.21 µs 0.065 µs 0.065 µs
Memory 2k steps 8k steps 32k steps 64k steps 64k steps
Analog Input Analog Output Temperature Input
FXMotor or Inverter ControlAnalog Output Device
Temperature Sensor
Analog Input Device FX
PT100/PT1000/Ni1000 Thermocouple (Temperature Measurement Device)
Temperature Value Read to PLC
A/D convert
Ammeter or Pressure Sensor
Voltage or Current Input
Analog Input Device FX
PLC Data ProcessingA/D convert Voltage or Current Input
PLC Data ProcessingA/D convert
Open Collector Inputs Rotary Encoder or Sensor Gauge
FX3U / FX3UC
FX Integrated High-Speed Counter FX with High-Speed I/O Adapter
Differential Line Receiver Inputs
Rotary Encoder or Sensor Gauge
8ch max.
2ch max.
OR
1-phase 1-count up to 200kHz
1-phase 2-count up to 200kHz2-phase 2-count up to 100kHz
FX3U-4HSX-ADP2 Adapters max.
FX3U
Analog ControlExpanding the FX PLC with analog inputs and outputs is required when the system needs to handle voltage or current inputs/outputs, temperatureinputs, or temperature or PID control. The following expansion boards, special adapters, and special function blocks support different ranges andcombinations of these features.
* With remote I/O.
F1-FX 2009 3/27/09 5:44 PM Page 128
-
OR + Analog Speed Control (0-10V DC, 4-20mA)
FX1N-1DA-BD
Inverter
Motor
FX1S FX1N
RS-485 Communication Equipment
A
RS-485 Communication
FX3U/FX3UC/FX3G
F
* Applicable Inverters: F700/A700/E700/V500/F500/A500/E500/S500
Mitsubishi Electric Automation | Programmable Logic Controllers FX Family 129
Inverter ControlParameters and commands between the PLC and Mitsubishi Inverters can be handled through serial communication using FREQROL protocol.
PositioningThe built-in high-speed pulse outputs on all transistor-type FX Series PLCs,are designed to satisfy simple independent-axis positioning applications. Formore advanced applications, the SSCNET Special Function Block provideshigh performance positioning control.
Open Field NetworksWithin an application, control devices can be made up from equipment fromdifferent manufacturers, however sustaining reliable communication betweendevices is essential.
100kHz
200kHz
200kHz
200kHz
200kHz
100kHz
100kHz
1st Axis
2nd Axis
3rd Axis
Transistor-type Output
Servo Amp, Stepping Motor Driver
Pulse Output2 Axes
2 Axes
ON (Forward Rotation)
Direction
OFF (Reverse Rotation)
FX3U / FX3UCn Ethernetn CC-Linkn PROFIBUSn Modbus
N:N Network
Connect up to 8 FX PLCs using N:N Networking to allow data exchange between each station.
Communication between FX Series PLCs
8 FX PLCs Max.RS-485 Communication
RS-485 Communication
Station 0
Station 0
Master Station Slave Station
Note: The RS2 Instruction is only available for FX3U/FX3UC Series PLCs
1:N Computer to PLC CommunicationThe PC can communicate with a network of up to 16 FX, A, and Q PLCs.
16 PLCs Max.RS-485Communication
RS-485 Communication
Computer (PC)
Computer (PC)
Station n
PLC communication with Printers, Barcode Readers, etc.Parallel Link
Auxiliary Relays (M) and Data Registers (D) are updated automatically between two PLCs of the same series.
Communication between 2 FX Series PLCs of the same seriesNon-Protocol Communication (RS/RS2 Instructions)
Serial communication is possible between a PLC and any external equipment with an RS-232C or RS-485 (RS-422) interface.
PC, Printer,Barcode Reader, etc.
1:1 RS-232C Communication Equipment to PLCWhen communicating over an RS-232C interface, the PC can communicate with one FX PLC.
RS-232C Communication
RS-232C Communication
Computer Link (Dedicated Protocol)Communication with a PC Communication with a PC
Using a modem connection, a PC can monitor/force devices and perform program upload/download to a PLC from remote locations.
Computer (with GX Developer)
Remote Maintenance
Phone LineRS-485 Communication Equipment
RS-485 Communication Equipment
RS-232C Communication Equipment
RS-232C Communication Equipment
RS-485 Communication Equipment
Station 1 Station n
Modem Modem
RS-232C Communication
RS-232C Communication Equipment
Serial CommunicationMultidrop networks, non-protocol communication, and remote maintenance are just some of the many uses.
F1-FX 2009 3/27/09 5:44 PM Page 129
-
130
nP
RO
GR
AM
MA
BL
E L
OG
IC C
ON
TR
OL
LE
RS
FX
FA
MIL
Y
Main Units OverviewFX3U – Top of the Line
Controllable I/O: 16 – 384 points with CC-Link or AS-i remote I/O Main Unit I/O: 16/32/48/64/80/128 points
The FX3U is the original dual system-bus, high speed, fullyexpandable compact PLC designed to seamlessly control communication, networking, analog, and positioning systems.
n 3rd generation compact PLCn High efficiency with more speed, more performance,
more memory, and new functions.n Built-in high speed processing and positioningn Exchangeable communication expansion boards that mount
directly into the main unit (USB, RS-232C, RS-422, RS-485)n Simultaneous memory cassette and display module mounting
availablen Integrated real-time clockn Easy programming with large instruction set and table
positioning configuration.n Large programming memoryn Programming with GX Developer
Product DetailsAll-in-one CPU, power supply and I/O. Includes many upgradedfeatures from the FX2N, including high expandability using Expansion Boards and Special Adapters to add functionality.
Fast Instruction TimesBasic Instructions: 0.065 µs / instruction (Contact Instruction)Applied Instructions: 0.642 µs / instruction (MOV Instruction)
Large Memory64,000 steps of built-in program memoryFlash Memory Cassettes with loader functionality also available
Large Device MemoryAuxiliary Relays 7,680 points
Timers 512 points
Counters 235 points
Data Registers 8,000 points
Extension Registers 32,768 points
Extension File Registers* 32,768 points
Speed
Memory
Analog
PositioningCommunication
Expandability
FX3UC – Slim Fit
Controllable I/O: 16 – 384 points with CC-Link or AS-i remote I/OMain Unit I/O: 16/32/64/96 points
The FX3UC is the new ultra-compact high speed, fully expandablePLC. Based on 24V DC power and using connector-type transistor I/O,the FX3UC is designed for space conscious and modular applications.
n 3rd generation Super-compact PLCn Reduced size and wiring using connector-type I/On Built-in high speed processing and positioningn Ultra-compact design featuring connector-type wiring for
installation space optimization.n 64k steps of internal program memoryn Integrated real-time clockn Easy programming with large instruction set and table
positioning configurationn High-speed processing n Programming with GX Developer
Product DetailsUltra-compact size main unit including many upgraded features fromthe FX2NC, including high expandability using Special Adapters to add functionality
Fast Instruction TimesBasic Instructions: 0.065µs / instruction (Contact Instruction)Applied Instructions: 0.642µs / instruction (MOV Instruction)
Large Memory64,000 steps of built-in program memoryFlash Memory Cassettes with loader functionality also available
Large Device MemoryAuxiliary Relays 7,680 points
Timers 512 points
Counters 235 points
Data Registers 8,000 points
Extension Registers 32,768 points
Extension File Registers* 32,768 points
*With optional Memory Cassette
*With optional Memory Cassette
Speed
Memory
Analog
PositioningCommunication
Expandability
F1-FX 2009 3/27/09 5:44 PM Page 130
-
Mitsubishi Electric Automation | Programmable Logic Controllers FX Family 131
Speed
Memory
Analog
PositioningCommunication
Expandability
FX3G – Customized Control
Controllable I/O: 14 – 256 points (with CC-Link remote I/O)Main Unit I/O: 12/24/40/60 points
The FX3G is an introductory compact PLC that is latest addition to theFX3 series. With control of directly connected and networked I/O,connectivity to the FX3-series ADP bus and new expansion boards makesthe FX3G ideal for simple yet performance critical applications.
n 3rd Generation Compact PLCn Highly flexiblen Dual bus architecture- 32k steps of internal program memoryn Integrated real-time clockn Easy programming with large instruction set and table positioning
configurationn Built-in USB port for the programming communication function to
enable high-speed communication at 12Mbps.n Two built-in variable analog potentiometers available for adjusting
the timer set time.n Programming with GX Developer
Product DetailsAll in one CPU, power supply and I/O. Includes many upgraded featuresfrom the FX1N. Especially usage of the FX3 series ADP bus system andnew expansion boards (BD).
Instruction TimesBasic Instructions: 0.21µs / instruction (Contact Instruction)
Large Memory32,000 steps of built-in program memory. EEPROM memory cassette with loader function is available.
Large Device MemoryAuxiliary Relays 7,680 points
Timers 320 points
Counters 235 points
Data Registers 8,000 points
Extension Registers 24,000 points
Extension File Registers 24,000 points
The FX1N is an introductory micro PLC meant for simple yetperformance-critical applications. With internal positioning capabilities,comprehensive expansion options, and a battery-less maintenance-free design, the FX1N provides a competitive answer for controllingsystems with up to 128 I/O.
n Expandable terminal-type I/On Add-on analog control and communication functionalityn Integrated serial interface for communication with Personal
computers and HMIn Input and output indicator LEDsn Detachable terminal blocks for all unitsn All DC powered models support 12V to 24V power suppliesn Integrated real-time clockn System flexibility with expansion boards, special adapters,
extension I/O, and special function blocks
Product DetailsAll-in-one CPU, power supply and I/O. Many expandability optionsincluding a display unit, I/O modules, expansion boards, specialadapters, and special function modules.
Fast Instruction TimesBasic Instructions: 0.7µs / instruction (Contact Instruction)Applied Instructions: 3.7µs / instruction (MOV Instruction
Large Memory8,000 steps of built-in program memory.No battery. No maintenance.
Large Device MemoryAuxiliary Relays 1,536 points
Timers 256 points
Counters 235 points
Data Registers 8,000 points
FX1N – Exceeding Expectations
Controllable I/O: 14 – 128 points (132 with FX1N-4EX-BD)Main Unit I/O: 14/24/40/60 points
Speed
Memory
Analog
PositioningCommunication
Expandability
F1-FX 2009 3/27/09 5:44 PM Page 131
-
132
nP
RO
GR
AM
MA
BL
E L
OG
IC C
ON
TR
OL
LE
RS
FX
FA
MIL
Y
The FX1S is the fit-and-forget PLC solution for space and cost conscious applications requiring up to 30 I/O. This minimum-expandability, battery-less maintenance free controller is perfect for handling straightforward processes and can be hidden away inlocations without regular maintenance activities.
n Basic controller for general applicationsn High performance with minimal sizen Integrated power supply (AC or DC powered)n Maintenance-free EEPROM memoryn Ample memory capacity (2000 steps) and device rangesn High-speed operationsn Built-in positioning controln Integrated real-time clockn Increased functionality using Expansion Boards and
Special Adaptersn Programming with GX Developer
Product DetailsAll-in-one CPU, power supply and I/O. Expansion options includes adisplay unit and expansion boards for communication, analog control,or extra I/O.
Fast Instruction TimesBasic Instructions: 0.7µs / instruction (Contact Instruction)Applied Instructions: 3.7µs / instruction (MOV Instruction)
Large Memory2,000 steps of built-in program memoryNo battery. No maintenance.
Large Device MemoryAuxiliary Relays 512 points
Timers 64 points
Counters 32 points
Data Registers 256 points
Speed
Memory
Analog
PositioningCommunication
Expandability
FX1S – Keeping it SimpleControllable I/O: 10 – 30 points Main Unit I/O: 10/14/20/30 points
F1-FX 2009 3/27/09 5:44 PM Page 132
-
Mitsubishi Electric Automation | Programmable Logic Controllers FX Family 133
Input/Output Extension Blocks
Input/Output Extension Units Output Extension Blocks
6
7 8
Unpowered extension Blocks Powered extension Blocks Input Extension Blocks
Temperature
Special Function Modules
Accessories
FX2N-8EX-ES/ULFX2N-8EX-UA1/UL FX2N-16EX-ES/UL
FX2N-8ER-ES/UL
Memory CassettesnFX3U-FLROM-64FX3U-FLROM-16FX3U-FLROM-64L
FX3U-1PSU-5V
FX2N-8EYR-ES/ULFX2N-8EYT-ESS/ULFX2N-16EYR-ES/ULFX2N-16EYT-ESS/ULFX2N-16EYS
FX2N-32ER-ES/ULFX2N-32ET-ESS/ULFX2N-48ER-DSFX2N-48ER-ES/ULFX2N-48ER-UA1/ULFX2N-48ET-DSSFX2N-48ET-ESS/UL
FX3U-7DM FX3U-32BL
Display Modulesn Extension Cablesn
Batteryn PLC Bus ConnectornFX2N-CNV-BC
IN
2
OUT
OUT
FX -1PSU-5V3U
FX0N-30EC(30cm)FX0N-65EC(65cm)
FX3U-7DM
Display Module HoldernFX3U-7DM-HLDFX3U-FLROM-64L
FX3U-1PSU-5V
FX2N-16EYRFX2N-48ER
FX2N-8EX
FX2N-1PG-EFX2N-10PGFX3U-20SSC-HFX2N-1RM-E-SET
FX2N-16CCL-MFX2N-32CCLFX3U-64CCLFX3U-ENETFX3U-32DPFX3U-64DP-M
FX2N-2ADFX3U-4ADFX2N-2DAFX3U-4DAFX2N-5AFX2N-8ADFX -20SSC-H3U
FX3U-64CCLFX3U-20SSC-HFX0N-3A FX2N-232IFFX2N-2LC FX 2N-1HC
Power Supply Unit
Analog Positioning
High Speed Counter
Network
Communication
FX 3U -64CCL
RUN
L RUNL ERR.
SDRD
ERR.
FX0N-65EC
12
3
4
5
Temperature
Special Adapters
Expansion Boards
FX3U-232-BDFX3U-422-BDFX3U-485-BDFX3U-USB-BD
FX3U-4HSX-ADPFX3U-2HSY-ADP
GOTn
Optional Equipment and Software
FX3U-CNV-BD
FX3U Main Units
Interface Convertern SoftwarenGOT1000 (GT10/GT11/GT15) FX-USB-AW
FX-232AWC-HGX Developer
FX3U-422-BD
FX3U-232ADP-MBFX3U-485ADP-MB
FX3U-4AD-ADPFX3U-4AD-PNK-ADP
FX3U-48MR/ESFX3U-48MT/ESFX3U-48MT/ESSFX3U-48MR/DSFX3U-48MT/DSFX3U-48MT/DSS
FX3U-128MR/ESFX3U-128MT/ESFX3U-128MT/ESS
FX3U-32MR/ESFX3U-32MT/ESFX3U-32MT/ESSFX3U-32MR/DSFX3U-32MT/DSFX3U-32MT/DSS
FX3U-16MR/ESFX3U-16MT/ESFX3U-16MT/ESSFX3U-16MR/DSFX3U-16MT/DSFX3U-16MT/DSS
FX3U-80MR/ESFX3U-80MT/ESFX3U-80MT/ESSFX3U-80MR/DSFX3U-80MT/DSFX3U-80MT/DSS
FX3U-64MR/ESFX3U-64MT/ESFX3U-64MT/ESSFX3U-64MR/DSFX3U-64MT/DSFX3U-64MT/DSS
24+
24-
ïú
L4-
ïú
J-ty
peL1
+L1
-L2
+L2
-L3
+L3
-L4
+
PO WE R
FX3U -4AD -PTK-ADP
24+
24-
ïú
L4-
ïú
J-ty
peL1
+L1
-L2
+L2
-L3
+L3
-L4
+
POWER
FX 3U -4AD- PTW-ADP
SGB
Y5/7
-+
Y1/3
-+
Y4/6
-+
Y0/2
-+
Y4/6 Y5/7
Y1/3Y0 /2
PO W ER
FX 3U -2HSY -ADP
FP.R P
PLS DIR
SGA
X1/4 X 6/7
X 2/ 5X0/3
PO W ER
FX 3U-4HSX-AD P
SGSG
X6/7
X2/5
X1/4
X0/3
-+
-+
-+
-+
FX3U-4AD-ADPFX3U-4DA-ADPFX3U-3A-ADP
FX3U-4HSX-ADP
FX3U-32MR
FX3U Main Units 16-128 I/On
FX3U-4AD-PT-ADPFX3U-4AD-TC-ADPFX3U-4AD-PTW-ADPFX3U-4AD-PNK-ADP
FX3U-2HSY-ADP
DAC RDAC T1DAC T2DDC RDDC T1DDC T2
DAC RDAC T1DAC T2DDC R
DDC T1DDC T2
DAC RDAC T1DAC T2DDC R
DDC T1DDC T2
DAC RDAC T1DAC T2DDC R
DDC T1DDC T2
DAC RDAC T1DAC T2DDC RDDC T1DDC T2
DAC R
DAC T1DAC T2
DAC
RT1
T2DC
AC Power supply
DC Power supplyDC Input(sink/source)
Relay output
Transistor(sink)
Transistor(source)
Communication Interface Board
High Speed Counter PositioningAnalog
Communication
1345 6 7 8
High-S
peed
Outp
ut AD
P
High-S
peed
Inpu
t ADP
FX2N
I/O
Expa
nsion
s
FX3U
/FX
2N
Spec
ialFu
nctio
n Bl
ocks
FX 3U Main UnitBo
ard
Analo
gAD
P
Com
mun
icatio
n AD
P 2
FX3U
Powe
r Sup
ply
Unit
OR
F1-FX 2009 3/27/09 5:44 PM Page 133
-
134
nP
RO
GR
AM
MA
BL
E L
OG
IC C
ON
TR
OL
LE
RS
FX
FA
MIL
Y
Input Extension Blocks
Output Extension Blocks
Input Extension Blocks
Output Extension Blocks
Input/Output Extension Blocks
4
5
6 7
8
Unpowered extension Blocks
Special Function Modules*
FX-16E-TB/ULFX-16EYR-ES-TB/ULFX-16EYS-ES-TB/ULFX-16EYT-ESS-TB/ULFX-32E-TB/UL
FX0N-30EC(30cm)FX0N-65EC(65cm)
FX2C-16SW-CFX2C-16SW-TB
FX2C-I/O-CONFX2C-I/O-CON-SFX2C-I/O-CON-SA
Connector Partsn
FX3U-32BLBatteryn
FX2N-CNV-BCInput SwitchesnTerminal Blocksn
Extension Cablesn
PLC Bus Connectorn
FX2NC-100MPCB(1m)FX2NC-100BPCB(1m)FX2NC-10BPCB1(0.1m)
Power Supply CablesnFX0N-65EC
FX-16E-TB
* The special function Modules of FX3UC-**MT/DSS.
FX2NC-16EX-T-DS FX2NC-16EX-DSFX2NC-32EX-DS
FX2N-8EYR-ES/ULFX2N-8EYT-ESS/ULFX2N-16EYR-ES/ULFX2N-16EYT-ESS/ULFX2N-16EYS
FX2N-8EX-ES/ULFX2N-8EX-UA1/UL FX2N-16EX-ES/UL
FX2N-8ER-ES/UL
Special Function Blocksn
FX2NC-16EYR-T-DS FX2NC-16EYT-DSSFX2NC-32EYT-DSS
FX2NC-16EYR-T
FX3UC-4ADFX2NC-4DA
FX3UC-1PS-5V
FX2NC-CNV-IF
OUT
OUT
IN
2
FX 3UC -1PS-5V
PO WER
POWERX0
123
X4567
X0123
X4567
X0123
X4567
X0123
X4567
FX 2NC -32EX-DS
PWY0
123
Y4567
Y0123
Y4567
FX 2NC -16EYR-T-DS
FX 3U C -4AD
FX3UC-1PS-5V
FX3UC-4AD
FX2NC-32EX
FX2N-8EX FX2N-16EYR
FX2NC-1HC
FX2N-16CCL-MFX2N-32CCLFX3U-64CCLFX3U-ENET
FX2N-1PG-EFX2N-10PG
FX2N-2ADFX3U-4ADFX2N-2DA
FX -4DA3U
D / A
FX -20SSC-H3U
FX3U-4DA FX 2N-2AD FX 3U-20SSC-H FX 3U-64CCL
POWER
2N -2ADFX
FX2N-232IF
FX2N-2LCAnalog
High Speed Counter
I/O Extension Blocksn
Power Supply Unit
Interface Converter
Analog
Temperature
Network
Positioning
Communication
FX2N-1HC
High Speed Counter
FX 3U -64CCL
RUN
L RUNL ERR.
SDRD
ERR. FX3U-32DPFX3U-64DP-M
FX3U-4DAFX2N-5AFX2N-8AD
FX2N-1RM-E-SETFX3U-20SSC-H
OR
123
FX3UC Main Units
Memory Cassettes n
Accessories
I/O Cablesn
FX3U-FLROM-64FX3U-FLROM-16FX3U-FLROM-64L
FX3UC-16MT/D *FX3UC-16MT/DSS
FX3UC-32MT/D *FX3UC-32MT/DSS
FX3UC-64MT/D *FX3UC-64MT/DSS
FX3UC-96MT/D *FX3UC-96MT/DSS
FX-16E-150CAB(1.5m)FX-16E-300CAB(3m)FX-16E-500CAB(5m)
Connecting to Terminal Blockn
General I/O cable FX-16E-500CAB-S(5m)
GOTn
Optional Equipment and Software
Interface Convertersn
SoftwarenGOT1000 (GT10/GT11/GT15)
FX-USB-AWFX-232AWC-H
GX Developer
Special Adapters
FX3UC Main Units 16-96 I/On
FX3UC-64MT/DSS
FX-16E-150CAB-R(1.5m)FX-16E-300CAB-R(3m)FX-16E-500CAB-R(5m)
D1DC T1D2DC T2
D1DC T1D2DC T2
D1DC T1D2DC T2
D1DC T1D2DC T2
* Refer to the HARDWARE MANUAL
T1
T2
DC DC Power supply
DC Input(sink/source)
Transistor Output(sink)
Transistor Output(source)
DC Input(sink)D1
D2
FX3U-4AD-ADP
24+
24-
ïú
L4-
ïú
J-ty
peL1
+L1
-L2
+L2
-L3
+L3
-L4
+
PO WER
FX 3U -4AD-PTK-ADP
24+
24-
ïú
L4-
ïú
J-ty
peL1
+L1
-L2
+L2
-L3
+L3
-L4
+
POWER
FX 3U -4AD-PTW-ADP
FX3U-232ADP-MB
POWER
FX 3U -485ADP- MB
AD
RG
SR
DB
SDA
SDB
RD
SD
110
330
OPEN
POWER
FX 3U -232ADP-MB
RD
SD
FX3U-4AD-ADPFX3U-4DA-ADPFX3U-3A-ADP
FX3U-4AD-PT-ADPFX3U-4AD-TC-ADPFX3U-4AD-PTW-ADPFX3U-4AD-PNK-ADP
Analog Temperature
FX3U-232ADP-MBFX3U-485ADP-MB
Communication
FX3U-4AD-PNK-ADP FX3U-485ADP-MB
123 4 5 8
FX2N
CI/O
Expa
nsion
s
FX3U
C/F
X2N
C
Spec
ialFu
nctio
n Bl
ocks
FX 3UC Main Unit
Analo
g AD
P
Com
mun
icatio
n AD
P
FX3U
C/F
X2N
Spec
ialFu
nctio
n Bl
ocks
6
FX3U
C-1
PS-5
Vor
FX2N
C-C
NV-IF
7
FX2N
Unpo
were
dI/O
Expa
nsion
s
F1-FX 2009 3/27/09 5:44 PM Page 134
-
Mitsubishi Electric Automation | Programmable Logic Controllers FX Family 135
FX3G-CNV-ADP
1
2
345
Expansion Boards
FX3G Main UnitsSpecial Adapters
FX3G-232-BDFX3G-422-BDFX3G-485-BD
FX3G-14MT/ESFX3G-24MT/ESFX3G-40MT/ESFX3G-60MT/ES
MITSUBISHI
FX3G-24M
S/S X1 X3 X5 X7
X 11 X 13 X15
NL1 00 -24 0
VAC
24MT/ES
X 0 X2 X4X 6 X 10 X1
2 X14
Y0 Y1 Y2Y3 Y5 Y6
Y10
COM024 V COM10V
COM2 COM3 Y4CO M4 Y7 Y11
P OW
RUN
E RR
AL M
FX3G-24MT/ES
MITSUBISHI
FX3G-40M
S/ S X1 X3X5 X7 X
11 X1 3 X15
NL100 -2 40
VA C
40MT/ES
X0 X2 X4X6 X10 X1
2 X14
X17 X 21 X 23
X16 X2 0 X22
X2 5 X 27
X2 4 X26
Y0 Y1 Y2Y4 Y6
COM024V COM10V
CO M2 Y3 COM3Y5 Y7
Y11COM4
Y10 Y12Y13 CO M5 Y15
Y14Y17
Y16
PO W
RUN
ERR
AL M
FX3G-40MT/ES
FX3G-232-BD
FX3G-2AD-BDFX3G-1DA-BD
FX3U-232ADP-MBFX3U-485ADP-MB
FX3U-4AD-ADPFX3U-4DA-ADPFX3U-3A-ADP
FX3U XFPDA-DA4- 3U-232ADP-MB
POWER
FX3U-485ADP-MB
AD
RG
SR
DB
SD
AS
DB
RD
SD
110
330
OPEN
24+
24-
ïú
L4-
ïú
J-ty
peL1
+L1
-L2
+L2
-L3
+L3
-L4
+
POWER
FX3U -4AD-PTK-ADP
24+
24-
ïú
L4-
ïú
J-ty
peL1
+L1
-L2
+L2
-L3
+L3
-L4
+
POWER
FX3U -4AD-PTW-ADP
POWER
FX3U -232ADP-MB
RD
SD
FX3U XFPDA-KNP-DA4- 3U-485ADP-MB
FX3G-CNV-ADP
FX3GMain Units 14-60 I/On
FX3G-8AV-BD
FX3U-4AD-PT-ADPFX3U-4AD-TC-ADPFX3U-4AD-PTW-ADPFX3U-4AD-PNK-ADP
FX3G-CNV-ADP
FX3G-14MR/ESFX3G-24MR/ESFX3G-40MR/ESFX3G-60MR/ES
DAC T1DAC T1DAC T1DAC T1AnalogCommunication
Analog Setpoint
Analog Temperature Communication Interface Adapter
DACDACDACDAC
RRRR
AC
T1 Transistor Output(sink)
R Relay output
AC Power supply
DC Input(sink/source)D
1345 6 7 1
2
345 6 7 88
FX 3G Main Unit40/60 I/O Points
FX2N
I/O
Expa
nsion
s
FX3U
/FX
2N
Spec
ialFu
nctio
n Bl
ocks
Analo
gAD
P
Com
mun
icat
ion
ADP FX 3G Main Unit
14/24 I/O Points
FX2N
I/O
Expa
nsion
s
FX3U
/FX
2N
Spec
ialFu
nctio
n Bl
ocks
Analo
gAD
P
Com
mun
icat
ion
AD
P
FX3U
Powe
r Sup
plyUn
it
FX3U
Pow
er S
uppl
y U
nit
3
Inte
rface
Con
verte
r ADP
BD1
Interf
aceC
onve
rter A
DP
2BD1 BD2
2
GOTn
Optional Equipment and Software
Interface Convertern
Softwaren
GOT1000 (GT10/GT11/GT15)
FX-232AWC-H
GX Developer
Input Extension Blocks Output Extension Blocks
Input/Output Extension Blocks
Input/Output Extension Units
Power Supply Unit
6
7 8FX3U -1PSU-5V
FX -1PSU-5V3U
FX2N-32ER-ES/ULFX2N-32ET-ESS/ULFX2N-48ER-ES/ULFX2N-48ER-UA1/ULFX2N-48ET-ESS/UL
FX2N -48ER
FX2N-8EX-ES/ULFX2N-8EX-UA1/UL FX2N-16EX-ES/UL
FX2N-8ER-ES/UL
FX2N-8EYR-ES/ULFX2N-8EYT-ESS/ULFX2N-16EYR-ES/ULFX2N-16EYT-ESS/ULFX2N-16EYS
IN
2
FX2N -8EX
FX2N-16CCL-MFX2N-32CCLFX3U-64CCLFX3U-ENETFX3U-32DP
FX2N-2LCFX2N-2ADFX3U-4ADFX2N-2DAFX3U-4DAFX2N-5AFX2N-8AD
FX -4DA3U
D / A FX3U-4DA FX3U -1PSU-5V
Special Function Modules
skcolBnoisnetxederewopnUstinunoisnetxederewoP
Analog Temperature Network
I/O Extension Blocksn
Special Function Blocksn
AccessoriesMemory Cassetten
FX3G-EEPROM-32L
Display Modulen
FX3G-5DM
FX3G-5DM
FX3G XFL23-MORPEE- 3G-5DM FX3U -32BLExtension Cablesn BatterynPLC Bus Connectorn
FX2N -CNV-BCFX0N -30EC(30cm)FX0N -65EC(65cm)
FX0N -65EC
F1-FX 2009 3/27/09 5:44 PM Page 135
-
136
nP
RO
GR
AM
MA
BL
E L
OG
IC C
ON
TR
OL
LE
RS
FX
FA
MIL
Y
FX1N-485-BD FX1N-422-BD
Special Function Modules
Accessories
FX2N-8EX-ES/ULFX2N-8EX-UA1/ULFX2N-16EX-ES/UL
FX2N-8ER-ES/UL
FX2N-8EYR-ES/ULFX2N-8EYT-ESS/ULFX2N-16EYR-ES/ULFX2N-16EYT-ESS/UL
FX0N-40ER-ES/ULFX0N-40ET-DSSFX0N-40ER-DS
DisplayModules
n
Memory CassettenExtension Cablesn
FX0N-30EC(30cm)FX0N-65EC(65cm)
FX2N-CNV-BC
FX2N-64CL-MFX2N-16CCL-MFX2N-32CCLFX2N-32ASI-MFX0N-32NT-DP
FX0N-3AFX2N-2ADFX2N-2DAFX2N-4AD
Batteryn
FX1N-BAT
FX1N-EEPROM-8LFX1N-5DMFX-10DM-E
MI TSUBISHI
ES C - + OK
RW
TCETORPWS
NO
FFO
CLPL8
CLPL8DR
IN
2
OUT
OUT RUNERR.
L.R UN
FX 2N -64CL-M
L.ERRSDRD
PO WER
FX1N-BAT
PLC Bus Connector
nFX0N-65ECFX1N-EEPROM-8L
FX1N-5DM
FX2N-2DA FX2N-64CL-M
FX2N-32ER-ES/ULFX2N-32ET-ESS/UL
FX0N-40ER
FX2N-16EYR
FX2N-8EX
DAC RDAC T2DDC RDDC T2
Special Adapters
Expansion Boards
FX1N-232-BD
GOTn
Optional Equipment and Software
FX1N-4EX-BD*FX1N-2EYT-BD*
FX1N Main Units
Interface ConvertersnSoftwaren
GOT1000 (GT10/GT11/GT15)
FX-USB-AWFX-232AWC-H GX Developer
FX2NC-232ADP FX2NC-485ADP
FX1N-2AD-BD
POWER
RD
SD
FX 2NC -232ADP
POWER
RD
SD
FX 2NC -485ADP
RDA
RDB
SDA
SDB
SG
é
MITSUBISHI
0 1 2 3 4 5 6 7 8 9 10 1112 13 14 15
0 1 2 3 4 5 6 710 11
IN
OUT
PO WER
FX 1N -24MR
RUNERR OR
100-240VAC
X7 X11 X13 X15X5X3X1S/S X6 X10 X12 X14X4X2X0NL
24MR-ES/ULY10Y6Y5Y3
COM3 Y4 COM4Y7 Y11
COM2COM1COM024+
Y2Y1Y00V
FX2NC-232ADPFX2NC-485ADPFX2NC-ENET-ADP
FX1N-2AD-BD*FX1N-1DA-BD*FX1N-8AV-BD
FX1N-24MR
FX1N-24MR-ES/ULFX1N-24MT-ESS/ULFX1N-24MR-DSFX1N-24MT-DSS
FX1N-40MR-ES/ULFX1N-40MT-ESS/ULFX1N-40MR-DSFX1N-40MT-DSS
FX1N-60MR-ES/ULFX1N-60MT-ESS/ULFX1N-60MR-DSFX1N-60MT-DSS
FX1N Main Units 14-60 I/OnFX1N-14MR-ES/ULFX1N-14MT-ESS/ULFX1N-14MR-DSFX1N-14MT-DSS
AC RT1T2
DCAC Power supplyDC Power supplyDC Input(sink/source)
Relay outputTransistor(sink)Transistor(source)
DAC RDAC T2DDC RDDC T2
DAC RDAC T2DDC RDDC T2
DAC RDAC T2DDC RDDC T2
FX2N-48ER-ES/ULFX2N-48ET-ESS/ULFX2N-48ER-UA1/UL
FX1N-2AD-BD
FX2N-4DAFX2N-5AFX2N-8AD
Analog Network
Input/Output Extention Units
Input/Output Extention Block
Output Extension Blocks
Input Extention Blocks
InterfaceBoard
Communication
Communication
Extension
Analog 2
4
1 5
6
D
14 5 6
FX2N
I/O
Expa
nsio
ns
FX2N
Spec
ial F
unct
ion
Bloc
ks
FX 1NMain Unit
Com
mun
icatio
n AD
P
3
Inte
rface
Con
verte
r
ADP
2
Expa
nsio
n Bo
ards
3
* Ver.2.00 or later
FX1N-CNV-BD
Display Modulesn
FX1S Main Units
Accessories
Memory CassettenFX1N-EEPROM-8L
FX1N-5DMFX-10DM-E
MI TSUBISHI
ES C - + OK
RW
TCETORPWS
NO
FFO
CLPL8
CLPL8DR
FX1N-5DM FX1N-EEPROM-8L
Special Adapters
Optional Equipment and Software
Expansion Boards
GOTGOT1000 (GT10/GT11/GT15)n
Interface ConvertersFX-USB-AWFX-232AWC-H
n
SoftwareGX Developern
0 1 2 34 5 6 7
0 1 2 34 5
IN
OUT
POWER
FX1S-14MR
RUNERROR
MITSUBISHI
X7X5X3X1S/S X6X4X2X0NL100-240
VA C
14MR-ES/ULY4Y2Y1Y0
COM0 COM1COM2 Y3Y5
24V0V
FX1S-14MR
D
AC
R
T1
T2
DC
AC Power supply
DC Power supply
DC Input(sink/source)
Relay output
Transistor(sink)
Transistor(source)
DAC RDAC T2DDC RDDC T2
FX1S-10MR-ES/ULFX1S-10MT-ESS/ULFX1S-10MR-DSFX1S-10MT-DSS
FX1S-14MR-ES/ULFX1S-14MT-ESS/ULFX1S-14MR-DSFX1S-14MT-DSS
FX1S-20MR-ES/ULFX1S-20MT-ESS/ULFX1S-20MR-DSFX1S-20MT-DSS
FX1S-30MR-ES/ULFX1S-30MT-ESS/ULFX1S-30MR-DSFX1S-30MT-DSS
FX1S Main Units 10-30 I/On
DAC RDAC T2DDC RDDC T2
DAC RDAC T2DDC RDDC T2
DAC R
DAC T2
DDC R
DDC T2
POWER
LINK
ACT
FX 2NC -ENET-ADP
SD
RD
FX2NC-ENET-ADP
FX1N-232-BDFX1N-485-BDFX1N-422-BD
FX1N-2AD-BD*FX1N-1DA-BD*FX1N-8AV-BD
FX1N-4EX-BD*FX1N-2EYT-BD*
FX1N-CNV-BD
FX2NC-232ADP FX 2NC-485ADP
POWER
RD
SD
FX 2NC -485AD P
RDA
RDB
SDA
SDB
SG
é
POWER
RD
SD
FX 2NC -232ADP
FX1N-1DA-BD
FX1N-2AD-BD
FX1N-2AD-BD
FX1N-1DA-BD
FX2NC-232ADPFX2NC-485ADPFX2NC-ENET-ADP
Communication Boards
Analog Boards
Extension Boards
Interface Board
Communication Adapters
124
14
FX 1NMain UnitFX
2NC
Com
mun
icatio
n AD
P
3
Inte
rface
Conv
erte
r
Boar
ds
2
Expa
nsion
Boa
rds
3
* Ver.2.00 or later
F1-FX 2009 3/27/09 5:44 PM Page 136
-
Mitsubishi Electric Automation | Programmable Logic Controllers FX Family 137
Input/outputextension block
Input/outputpowered
extension unit
Special functionblock
Special functionunit
When an expansion board other than FX3U-CNV-BD is used, only 1 adapter can be connected.
Main unitExpansionboardSpecial adapter
(high-speed input)Special adapter
(communication)Special adapter
(analog)Special adapter
(high-speed output)
Only 1 unitUp to 2 unitsUp to 2 unitsUp to 2 unitsUp to 4 units
Special adapter (up to 10 units (*1)) Special function unit/block (up to 8 units)
Up to 4 units
Specialadapter(analog)
Specialadapter
(communication)Main unit
Input/outputextension
block
Specialfunction
unit
Specialfunction
unit
Up to 2 unitsUp to 8 units
Main unit40/60 point type
Special adapter(communication)
Up to 2 unitsUp to 2 unitsUp to 2 units
FX3G Main Units (40/60 Point Type)
FX3G Main Units (14/24 Point Type)
Only 1 unitUp to 2 units
Expansionboard
Specialadapter(analog)
Input/outputpowered
extension unit
Extensionpower supply
unit
Specialfunction block
Up to 8 units
Main unit14/24 point type
Only 1 unitOnly 1 unitOnly 1 unit Only 1 unitUp to 2 units
Expansionboard
Specialadapter(analog)
Input/outputpowered
extension unit
Extensionpower supply
unit
Specialfunction block
Up to 8 units
Special adapter(communication)
Configuration RulesCAUTION: For full configuration details please refer to the respective hardware manuals.
1. Number of input/output points
FX3U/FX3UC: The total number of combined input/output points and remote I/O points on CC-Link or AS-i system must be 384 points or lesson the whole system, where the number of local I/O points and remote I/O points cannot exceed 256 points.
FX3G: The total number of combined input/output points and remote I/O points on CC-Link must be 256 points or less on the whole system,where the maximum number of local I/O points and remote I/O points cannot exceed 128 points.
FX1N: The total number of input/output points must be 128 points (132 with FX1N-4EX-BD) or less.
2. Number of connected special extension devices
3. Calculation of current consumption
FX3U / FX3UC / FX3G:The power is supplied to each connected device from the built-in power supply of the main unit, the input / output poweredextension unit or the extension power supply unit. There are three types of built-in power supplies; 24VDC service power, 5VDC power and internal24VDC power. The power consumed varies depending on the type of product added.
FX1N: When used independently it can be expanded by 2 special function blocks or 1 special function block and up to 16 I/O points or up to 32 I/Opoints. It can also be expanded to 4 special function blocks when used in conjunction with an FX0N extension unit (2+2). An AC powered FX1Ncan be expanded by 8 special function blocks when used in conjunction with an FX2N expansion unit (2+6)
Note: FX1S controllers can generally be considered as standalone controllers so no explicit configuration requirements exist. However, for configuration of boards, memory cassettes anddisplays, etc. please refer to the FX1S hardware manual.
FX3U
FX3UC
FX3G
Power supplyfrom main unit
Power supply frominput/output powered
extension unit
Power supply fromextension power supply
unit*
Power supplyfrom main unit
Extension block(some blocks can
be connected)
Extension block(some blocks can
be connected)
Extension block(some blocks can
be connected)Main unit
Input/outputpoweredextension
unit
Extensionpower supply
unit
Expansionboard
Specialadapter
F1-FX 2009 3/27/09 5:44 PM Page 137
-
138
nP
RO
GR
AM
MA
BL
E L
OG
IC C
ON
TR
OL
LE
RS
FX
FA
MIL
Y
Model Number FX1S FX1N FX3G FX3U/FX3UC
Programming
I/O Points 30(+4 optional) 128(+4 optional) 256 total (combined local and CC-Linkremote I/O)384 total (combined local and
CC-Link remote I/O)
Address Range Max. 30 direct addressing Max. 128 direct addressing Max. 128 direct addressing andMax. 128 remote I/OMax. 256 direct addressing and
Max. 256 remote I/O
Program Memory 2,000 steps EEPROM 8,000 steps EEPROM32,000 steps EEPROM (internal),exchangeable EEPROM memory
cassette
64,000 steps RAM (internal),exchangeable FLROM memory
cassette
Instruction Time 0.55 µs or 0.7 µs / contact instruction 0.21 µs or 0.42 µs / contact instruction 0.065 µs / contact instruction
Number of Instructions27 sequence instructions,2 step ladder instructions,
85 applied instructions
27 sequence instructions,2 step ladder instructions,
89 applied instructions
29 sequence instructions,2 step ladder instructions,123 applied instructions
29 sequence instructions,2 step ladder instructions,210 applied instructions
Programming Language Step ladder, instruction list, SFC Step ladder
Program Execution Cyclical execution, refresh mode processing
Program Protection 8 character keyword with 3 protection levels each (*1) 2 different keywords, maximum password length 16 characters
8 or 16-character keyword protection with 3 protection
levels each (*1)
Devices
Auxiliary Relays512 total, with 384 general
(M0 – M383) and 128 latched(M384 – M511)
1,536 total, with 384 general (M0 -M383) and 1,152 latched
(M384 - M1535)
7,680 total, with 384 general (M0 -M384), 1152 EEPROM latched (M384 -
M1535), and 6,144 general/optionallatched (M1536 - M7679)
7,680 total, with 500 general (M0 - M499), 524 optional latched
(M500 - M1023), and 6,656latched (M1024 - M7679)
Special Auxiliary Relays 256 (M8000 - M8255) 512 (M8000 - M8511)
State Relays 128 all latched (S0 - S127) 1,000 all latched (S0 - S999)
4,096 total, with 1,000 EEPROMlatched (S0 - S999) and 3,096
general/optional latched(S1000 - S4095)
4,096 total, with 1,000 optionallatched (S0 - S999) and 3,096
latched (S1000 - S4095)
Timers64 total, with 31 points partiallyswitchable between 100ms and
10ms (T32 - T62)
256 total, with 206 100ms (T0 - T199 and T250 - T255), 46 10ms (T200 - T245), and 4
1ms (T246-T249)
320 total, with 206 100ms (T0 - T199 and T250 - T255),
46 10ms (T200 - T245), and 68 1ms (T246 - T249 and T256 - T319)
512 total, with 206 100ms(T0 - T191, T192 - T199 and
T250 - T255), 46 10ms (T200 - T245), and 260 1ms
(T246 - T249 and T256 - T511)
External Setpoint Entry Via Potentiometer 2 0
Counters32 total (16-bit only), with 16
general (C0-C15) and 16 latched(C16-C31)
235 total (16-bit and 32-bit), with36 general (C0 - C15 and C200 -
C219) and 199 latched (C16 -C199 and C220 - C234)
235 total (16-bit and 32-bit), with 36 general (C0 - C16 and C200 -C219) and 199 EEPROM latched (C16 - C199 and C220 - C234)
235 total (16-bit and 32-bit),with 120 general (C0 - C99 andC200 - C219) and 115 latched
(C100 - C199 and C220 -C234)
High-Speed Counters
1 phase, 6 points max: 60 kHz / 2points, 10 kHz / 4 points ; 2
phase, 2 points max:30 kHz / 1 point, 5 kHz / 1 point
1 phase, 6 points max: 60 kHz /2 points, 10 KHz /4 points;
2 phase, 2 points max: 30 kHz /1 point, 5 kHz /1 point
21 total, with 16 1-phase (C235 - C250) and 5 2-phase (C251 - C255)
High-Speed Counter Speed — —
1 phase, 6 points max: 60 kHz / 4 points, 10 kHz / 2 points
2 phase, 3 points max: 30 kHz / 2 points, 5kHz/1 point
1 phase, 8 points max: 100 kHz /6 points; 10 kHz / 2 points
2 phase, 2 points max: 50 kHz / 2 points
Real-Time Clock — Year, month, day, hour, minute, second, day of the week
Data Registers256 total, with 128 general
(D0 - D127) and 128 latched(D128 - D255)
8,000 total, with 128 general (D0 - D127) and 7,872 latched
(D128 - D7999)
8,000 total, with 128 general (D0 - D127), 972 EEPROM latched
(D128 - D1099), and 6,900general/optional latched
(D1100 - D7999)
8,000 total, with 200 general (D0 - D199), 312 optional latched(D200 - D511), and 7,488 latched
(D512 - D7999)
Extension Registers — — 24,000(R0~R23999) 32,768(R0~R32767)
Extension File Registers — — 24,000(ER0~R23999) internal/optional memory32,768(ER0~R32767)
optional memory
Index Registers 16
Special Data Registers 256 (D8000 - D8255) 256 (D8000 - D8255) 512 (D8000 - D8511)
Pointers 64 128 2,048 4,096
Nestings 8
Interrupt Inputs 6
Constants 16-bit: K: -32,768 to +32,767; H: 0 to FFFF; 32-bit: K: -2,147,483,648 to +2,147,483,647; H: 0 to FFFF FFFF
Note:1. 8-character keyword protection level depends on the keyword registered; 16-character keyword protection level is set within GX-Developer
Programming and Device Specifications
F1-FX 2009 3/27/09 5:44 PM Page 138
-
Mitsubishi Electric Automation | Programmable Logic Controllers FX Family 139
Environmental SpecificationsModel Number FX1S FX1N FX3G FX3U FX3UC
Ambient Temperature 0 – 55 °C (storage temperature: -20 – +70 °C) 0 – 55°C (storage temperature: -25 – +75°C)
Noise Durability 1000 Vpp with noise generator; 1 µs at 30 – 100 Hz
Dielectric Withstand Voltage AC PSU: 1500 VAC, 1 min. / DC PSU: 500 VAC, 1 min. 1500 VAC, 1 min. AC PSU: 1500 VAC, 1 min. / DCPSU: 500 VAC, 1 min. 500 VAC, 1 min.
Ambient Relative Humidity 35 – 85% (non-condensing) 5 – 95% (non-condensing)
Shock Resistance Complies to IEC/EN 68-2-27: 15 G
(3 times each in 3 directions for11 ms)
Complies to IEC 68-2-27: 15 G (3 times each in 3 directions for
11 ms)
Complies to IEC 68-2-27: 147m/s2 (3 times each in 3directions for 11 ms)
Complies to IEC 68-2-27: 15 G(3 times each in 3 directions for 11 ms)
Vibration Resistance Complies to IEC/EN 68-2-6: 1 G (resistance to vibrations from 57 –150 Hz for 80 minutes along all 3 axes); 0.5 G for DIN rail mountingComplies to IEC 68-2-6: 9.8m/s2 (resistance to vibrations from 57 – 150 Hz for
80 minutes along all 3 axes); 4.9m/s2 for DIN rail mounting
Insulation Resistance 500 VDC, 5 MΩ
Ground Class D: Grounding resistance 100Ω or less
Fuse AC models: 250 V 1.0 A;DC models: 250V 0.8 A
AC units: From FX1N-14Mnn toFX1N-24Mnn: 250 V 1.0 A;
From FX1N-40Mnn to FX1N-60Mnn: 250 V 3.15 A / DC units:
125 V 3.15 A
For FX3G-14Mnn and FX3G-24M[nn: 250V 1 A;
For FX3G-40Mnn and FX3G-60Mnn: 250V 3.15 A
From FX3U-16Mnn to FX3U-32Mnn 250V 3.15 A;
From FX3U-48Mnn to FX3U-128Mnn: 250V 5 A
125V 3.15A
Environment Avoid environments containing corrosive gases, install in a dust-free location.
Electrical Specifications
Power Supply Specifications
FX1SAC Powered
Models (FX1S-nnMnn-
ES/UL)
FX1SDC Powered
Models(FX1S-nnMnn-DS/-
DSS)
FX1NAC Powered
Models(FX3U-nnMnn/ES/
ESS)
FX1N DC Powered
Models(FX3U-nnMnn/DS/
DSS)
FX3G
FX3UAC Powered
Models(FX3U-nnMnnES/
ESS)
FX3UDC Powered
Models(FX3U-nnMnn/DS/
DSS)
FX3UC
Power Supply100–240 V AC
(+10 % / -15 %),50/60 Hz (±10 %)
24 VDC (+10 % / -15 %)
100–240 VAC (+10 % / -15 %),50/60 Hz (±10 %)
12–24 VDC (+20 % / -15 %)
100–240 VAC (+10 % / -15 %),
50/60 Hz
100–240 VAC (+10 % / -15 %),
50/60 Hz
24 VDC (+20% / -30 %)
24 VDC (+20% /-15 %) Ripple
Voltage (p-p) 5% or less
Inrush Current at ON
15 A / 5 ms (at100 VAC); 25 A /
5 ms (at 200VAC)
10 A / 0.1 ms (at 24 VDC)
30 A / 5 ms (at 100VAC); 50 A / 5 ms
(at 200 VAC)
25 A / 1 ms (at 24 VDC); 22 A / 0.3 ms
(at 12 VDC)
30 A /
-
140
n
PR
OG
RA
MM
AB
LE
LO
GIC
CO
NT
RO
LL
ER
S F
X F
AM
ILY
Model Number FX3U-16MR/DS FX3U-16MR/ES FX3U-16MT/DSS FX3U-16MT/DS FX3U-16MT/ESS FX3U-16MT/ES
Stocked Item S S S S S S
Rating UL • cUL • CE
Integrated Inputs/Outputs 16 16 16 16 16 16
Power Supply 24 VDC 100-240 VAC 24 VDC 24 VDC 100-240 VAC 100-240 VAC
Integrated Inputs 8 8 8 8 8 8
Integrated Outputs 8 8 8 8 8 8
Output Type Relay Relay Transistor (Source) Transistor (Sink) Transistor (Source) Transistor (Sink)
Power Consumption W 25 30 25 25 30 30
Weight (kg) 0.60 0.60 0.60 0.60 0.60 0.60
Dimensions (W x H x D) mm 130 x 90 x 86 130 x 90 x 86 130 x 90 x 86 130 x 90 x 86 130 x 90 x 86 130 x 90 x 86
FX3U Main Units with 32 I/O
FX3U Main Units with 16 I/O
Model Number FX3U-32MR/DS FX3U-32MR/ES FX3U-32MT/DSS FX3U-32MT/DS FX3U-32MT/ESS FX3U-32MT/ES
Stocked Item S S S S S S
Rating UL • cUL • CE
Integrated Inputs/Outputs 32 32 32 32 32 32
Power Supply 24 VDC 100-240 VAC 24 VDC 24 VDC 100-240 VAC 100-240 VAC
Integrated Inputs 16 16 16 16 16 16
Integrated Outputs 16 16 16 16 16 16
Output Type Relay Relay Transistor (Source) Transistor (Sink) Transistor (Source) Transistor (Sink)
Power Consumption W 30 35 30 30 35 35
Weight (kg) 0.65 0.65 0.65 0.65 0.65 0.65
Dimensions (W x H x D) mm 150 x 90 x 86 150 x 90 x 86 150 x 90 x 86 150 x 90 x 86 150 x 90 x 86 150 x 90 x 86
FX3U Main Units with 48 I/OModel Number FX3U-48MR/DS FX3U-48MR/ES FX3U-48MT/DSS FX3U-48MT/DS FX3U-48MT/ESS FX3U-48MT/ES
Stocked Item S S S S S S
Rating UL • cUL • CE
Integrated Inputs/Outputs 48 48 48 48 48 48
Power Supply 24 VDC 100-240 VAC 24 VDC 24 VDC 100-240 VAC 100-240 VAC
Integrated Inputs 24 24 24 24 24 24
Integrated Outputs 24 24 24 24 24 24
Output Type Relay Relay Transistor (Source) Transistor (Sink) Transistor (Source) Transistor (Sink)
Power Consumption W 35 40 35 35 40 40
Weight (kg) 0.85 0.85 0.85 0.85 0.85 0.85
Dimensions (W x H x D) mm 182 x 90 x 86 182 x 90 x 86 182 x 90 x 86 182 x 90 x 86 182 x 90 x 86 182 x 90 x 86
FX3U Main Units with 64 I/OModel Number FX3U-64MR/DS FX3U-64MR/ES FX3U-64MT/DSS FX3U-64MT/DS FX3U-64MT/ESS FX3U-64MT/ES
Stocked Item S S S S S S
Rating UL • cUL • CE
Integrated Inputs/Outputs 64 64 64 64 64 64
Power Supply 24 VDC 100-240 VAC 24 VDC 24 VDC 100-240 VAC 100-240 VAC
Integrated Inputs 32 32 32 32 32 32
Integrated Outputs 32 32 32 32 32 32
Output Type Relay Relay Transistor (Source) Transistor (Sink) Transistor (Source) Transistor (Sink)
Power Consumption W 40 45 40 40 45 45
Weight (kg) 1.0 1.0 1.0 1.0 1.0 1.0
Dimensions (W x H x D) mm 220 x 90 x 86 220 x 90 x 86 220 x 90 x 86 220 x 90 x 86 220 x 90 x 86 220 x 90 x 86
Main Unit Specifications
FX3U
F1-FX 2009 3/27/09 5:44 PM Page 140
-
Mitsubishi Electric Automation | Programmable Logic Controllers FX Family 141
FX3U Main Units with 80 I/OModel Number FX3U-80MR/DS FX3U-80MR/ES FX3U-80MT/DSS FX3U-80MT/DS FX3U-80MT/ESS FX3U-80MT/ES
Stocked Item — S — S S S
Rating UL • cUL • CE
Integrated Inputs/Outputs 80 80 80 80 80 80
Power Supply 24 VDC 100-240 VAC 24 VDC 24 VDC 100-240 VAC 100-240 VAC
Integrated Inputs 40 40 40 40 40 40
Integrated Outputs 40 40 40 40 40 40
Output Type Relay Relay Transistor (Source) Transistor (Sink) Transistor (Source) Transistor (Sink)
Power Consumption W 45 50 45 45 50 50
Weight (kg) 1.2 1.2 1.2 1.2 1.2 1.2
Dimensions (W x H x D) mm 285 x 90 x 86 285 x 90 x 86 285 x 90 x 86 285 x 90 x 86 285 x 90 x 86 285 x 90 x 86
FX3U Main Units with 128 I/OModel Number FX3U-128MR/ES FX3U-128MT/ESS FX3U-128MT/ES
Stocked Item S — —
Rating UL • cUL • CE
Integrated Inputs/Outputs 128 128 128
Power Supply 100-240 VAC 100-240 VAC 100-240 VAC
Integrated Inputs 64 64 64
Integrated Outputs 64 64 64
Output Type Relay Transistor (Source) Transistor (Sink)
Power Consumption W 65 65 65
Weight (kg) 1.8 1.8 1.8
Dimensions (W x H x D) mm 350 x 90 x 86 350 x 90 x 86 350 x 90 x 86
FX3UC Main Units with 16 – 96 I/OModel Number FX3UC-16MT/D FX3UC-16MT/DSS FX3UC-32MT/D FX3UC-32MT/DSS FX3UC-64MT/D FX3UC-64MT/DSS FX3UC-96MT/D FX3UC-96MT/DSS
Stocked Item — S — S S — — S
Rating UL • cUL UL • cUL • CE UL • cUL UL • cUL • CE
Integrated Inputs/Outputs 16 16 32 32 64 64 96 96
Integrated Inputs 8 8 16 16 32 32 48 48
Input Type Sink Sink / Source Sink Sink / Source Sink Sink / Source Sink Sink / Source
Integrated Outputs 8 8 16 16 32 32 48 48
Output Type Transistor (Sink) Transistor (Source) Transistor (Sink) Transistor (Source) Transistor (Sink) Transistor (Source) Transistor (Sink) Transistor (Source)
Power Consumption W 6 6 8 8 11 11 14 14
Weight (kg) 0.2 0.2 0.2 0.2 0.3 0.3 0.35 0.35
Dimensions (W x H x D) mm 34 x 90 x 74 34 x 90 x 74 34 x 90 x 74 34 x 90 x 74 59.7 x 90 x 74 59.7 x 90 x 74 85.4 x 90 x 74 85.4 x 90 x 74
FX3UC
F1-FX 2009 3/27/09 5:44 PM Page 141
-
142
n
PR
OG
RA
MM
AB
LE
LO
GIC
CO
NT
RO
LL
ER
S F
X F
AM
ILY
FX3G Main Units with 14 – 24 I/OModel Number FX3G-14MT/ES FX3G-14MR/ES FX3G-14MT/ESS FX3G-24MT/ES FX3G-24MR/ES FX3G-24MT/ESS
Stocked Item S S S S S S
Rating UL • cUL • CE
Integrated Inputs/Outputs 14 14 14 24 24 24
Power Supply (V) 100-240 VAC 100-240 VAC 100-240 VAC 100-240 VAC 100-240 VAC 100-240 VAC
Integrated Inputs 8 8 8 14 14 14
Integrated Outputs 6 6 6 10 10 10
Output Type Transistor (sink) Relay Transistor (source) Transistor (sink) Relay Transistor (source)
Power Consumption (W) 31 31 31 32 32 32
Weight (kg) 0.5 0.5 0.5 0.55 0.55 0.55
Dimensions (W x H x D) mm 90 x 90 x 86 90 x 90 x 86 90 x 90 x 86 90 x 90 x 86 90 x 90 x 86 90 x 90 x 86
FX3G Main Units with 40 – 60 I/OModel Number FX3G-40MT/ES FX3G-40MR/ES FX3G-40MT/ESS FX3G-60MT/ES FX3G-60MR/ES FX3G-60MT/ESS
Stocked Item S S S S S S
Rating UL • cUL • CE
Integrated Inputs/Outputs 40 40 40 60 60 60
Power Supply (V) 100-240 VAC 100-240 VAC 100-240 VAC 100-240 VAC 100-240 VAC 100-240 VAC
Integrated Inputs 24 24 24 36 36 36
Integrated Outputs 16 16 16 24 24 24
Output Type Transistor (sink) Relay Transistor (source) Transistor (sink) Relay Transistor (source)
Power Consumption (W) 37 37 37 40 40 40
Weight (kg) 0.7 0.7 0.7 0.85 0.85 0.85
Dimensions (W x H x D) mm 130 x 90 x 86 130 x 90 x 86 130 x 90 x 86 175 x 90 x 86 175 x 90 x 86 175 x 90 x 86
FX1N Main Units with 14 – 24 I/O
Model Number FX1N-14MR-DSFX1N-14
MR-ES/ULFX1N-14MT-DSS
FX1N-14MT-ESS/UL
FX1N-24MR-DS
FX1N-24MR-ES/UL
FX1N-24MT-DSS
FX1N-24MT-ESS/UL
FX1N-24MT
Stocked Item S S S S S S S S S
Rating UL • cUL • CE UL • cUL
Integrated Inputs/Outputs 14 14 14 14 24 24 24 24 24
Power Supply (V) 12 – 24 VDC 100 – 240 VAC 12 – 24 VDC 100 – 240 VAC 12 – 24 VDC 100 – 240 VAC 12 – 24 VDC 100 – 240 VAC 100 – 240 VAC
Integrated Inputs 8 8 8 8 14 14 14 14 14
Integrated Outputs 6 6 6 6 10 10 10 10 10
Output Type Relay Relay Transistor(source)Transistor(source) Relay Relay
Transistor(source)
Transistor(source) Transistor (sink)
Power Consumption (W) 13 29 13 29 15 30 15 30 30
Weight (kg) 0.45 0.45 0.45 0.45 0.45 0.45 0.45 0.45 0.45
Dimen. (W x H x D) mm 90 x 90 x 75 90 x 90 x 75 90 x 90 x 75 90 x 90 x 75 90 x 90 x 75 90 x 90 x 75 90 x 90 x 75 90 x 90 x 75 90 x 90 x 75
FX1N Main Units with 40 – 60 I/O
Model Number FX1N-40MR-DSFX1N-40
MR-ES/ULFX1N-40MT-DSS
FX1N-40MT-ESS/UL
FX1N-40MT
FX1N-60MR-DS
FX1N-60MR-ES/UL
FX1N-60MT-DSS
FX1N-60MT-ESS/UL
FX1N-60MT
Stocked Item S S S S S — S S S S
Rating UL • cUL • CE UL • cUL UL • cUL • CE UL • cUL
Integrated Inputs/Outputs 40 40 40 40 40 60 60 60 60 60
Power Supply 12 – 24 VDC100 – 240
VAC12 – 24
VDC100 – 240
VAC100 – 240
VAC12 – 24
VDC100 – 240
VAC12 – 24
VDC100 – 240
VAC100 – 240
VAC
Integrated Inputs 24 24 24 24 24 36 36 36 36 36
Integrated Outputs 16 16 16 16 16 24 24 24 24 24
Output Type Relay Relay Transistor(source)Transistor(source)
Transistor(sink) Relay Relay
Transistor(source)
Transistor(source)
Transistor(sink)
Power Consumption (W) 18 32 18 32 32 20 35 20 35 35
Weight (kg) 0.65 0.65 0.65 0.65 0.65 0.8 0.8 0.8 0.8 0.8
Dimen. (W x H x D) mm 130 x 90 x 75 130 x 90 x 75 130 x 90 x 75 130 x 90 x 75 130 x 90 x 75 175 x 90 x 75 175 x 90 x 75 175 x 90 x 75 175 x 90 x 75 175 x 90 x 75
FX3G
FX1N
F1-FX 2009 3/27/09 5:44 PM Page 142
-
Mitsubishi Electric Automation | Programmable Logic Controllers FX Family 143
FX1S Main Units with 10 – 14 I/O
Model Number FX1S-10MR-DSFX1S-10
MR-ES/ULFX1S-10MT-DSS
FX1S-10MT-ESS/UL
FX1S-10MT
FX1S-14MR-DS
FX1S-14MR-ES/UL
FX1S-14MT-DSS
FX1S-14MT-ESS/UL
FX1S-14MT
Stocked Item — S S S — S S S S S
Rating UL • cUL • CE UL • cUL UL • cUL • CE UL • cUL
Integrated Inputs/Outputs 10 10 10 10 10 14 14 14 14 14
Power Supply 24 VDC 100 – 240 VAC 24 VDC 100 – 240 VAC 100 – 240 VAC 24 VDC 100 – 240 VAC 24 VDC 100 – 240 VAC 100 – 240 VAC
Integrated Inputs 6 6 6 6 6 8 8 8 8 8
Integrated Outputs 4 4 4 4 4 6 6 6 6 6
Output Type Relay Relay Transistor(source)Transistor(source)
Transistor(sink) Relay Relay
Transistor(source)
Transistor(source)
Transistor(sink)
Power Consumption (W) 6 19 6 19 19 6.5 19 6.5 19 19
Weight (kg) 0.22 0.3 0.22 0.3 0.3 0.22 0.3 0.22 0.3 0.3
Dimen. (W x H x D) mm 60 x 90 x 49 60 x 90 x 75 60 x 90 x 49 60 x 90 x 75 60 x 90 x 75 60 x 90 x 49 60 x 90 x 75 60 x 90 x 49 60 x 90 x 75 60 x 90 x 75
FX1S Main Units with 20 – 30 I/O
Model Number FX1S-20MR-DSFX1S-20
MR-ES/ULFX1S-20MT-DSS
FX1S-20MT-ESS/UL
FX1S-20MT
FX1S-30MR-DS
FX1S-30MR-ES/UL
FX1S-30MT/DSS
FX1S-30MT-ESS/UL
FX1S-30MT
Stocked Item S S S S S S S S S S
Rating UL • cUL • CE UL • cUL UL • cUL • CE UL • cUL
Integrated Inputs/Outputs 20 20 20 20 20 30 30 30 30 30
Power Supply 24 VDC 100 – 240 VAC 24 VDC 100 – 240 VAC 100 – 240 VAC 24 VDC 100 – 240 VAC 24 VDC 100 – 240 VAC 100 – 240 VAC
Integrated Inputs 12 12 12 12 12 16 16 16 16 16
Integrated Outputs 8 8 8 8 8 14 14 14 14 14
Output Type Relay Relay Transistor(source)Transistor(source)
Transistor(sink) Relay Relay
Transistor(source)
Transistor(source)
Transistor(sink)
Power Consumption (W) 7 20 7 20 20 8 21 8 21 21
Weight (kg) 0.3 0.4 0.3 0.4 0.4 0.35 0.45 0.35 0.45 0.45
Dimen. (W x H x D) mm 75 x 90 x 49 75 x 90 x 75 75 x 90 x 49 75 x 90 x 75 75 x 90 x 75 100 x 90 x 49 100 x 90 x 75 100 x 90 x 49 100 x 90 x 75 100 x 90 x 75
FX1S
F1-FX 2009 3/27/09 5:44 PM Page 143
-
144
n
PR
OG
RA
MM
AB
LE
LO
GIC
CO
NT
RO
LL
ER
S F
X F
AM
ILY
Model Number FX2N-32ER-ES/UL FX2N-32ET-ESS/UL FX2N-48ER-DS FX2N-48ER-ES/UL FX2N-48ER-UA1/UL
Stocked Item S S – S S
Rating UL • cUL • CE UL • cUL • CE CE UL • cUL • CE UL • cUL • CE
Applicable PLCs FX3U / FX3G / FX1N FX3U / FX1N FX3U / FX3G / FX1N
Integrated Inputs / Outputs 32 32 48 48 48
Power Supply AC Range (+10%, -15%) 100–240 VAC 100–240 VAC 24 VDC 100–240 VAC 100–240 VAC
External Service Power Supply (24VDC) mA 250 250 — 460 —
Power Supply Int. Bus (5VDC) mA 690 690 690 690 690
Integrated Inputs 16 (24 VDC) 16 (24 VDC) 16 (24 VDC) 16 (24VDC) 24 (120 VDC)
Integrated Outputs 16 16 24 24 24
Output Type Relay Source Trans. Relay Relay Relay
ON Voltage (Max.) Relay version: < 264 VAC, < 30 VDC; Transistor version: 5 – 30 VDC
Max. OutputCurrent
Per Output (A) 2 0.5 2 2 2
Per 4 Outputs (A) 8 0.8 8 8 8
Weight (kg) 0.65 0.65 0.85 0.85 1.0
Dimensions (W x H x D) mm 150 x 90 x 87 150 x 90 x 87 182 x 90 x 87 182 x 90 x 87 220 x 90 x 87
Model Number FX2N-48ET FX2N-48ET-DSS FX2N-48ET-ESS/UL FX0N-40ER-DS FX0N-40ER-ES/UL FX0N-40ET-DSS
Stocked Item – – – – – –
Rating – CE UL • cUL • CE CE UL • cUL • CE CE
Applicable PLCs FX3U / FX1N FX1N
Integrated Inputs / Outputs 48 48 48 40 40 40
Power Supply 100–240 VAC 24 VDC 100–240 VAC 24 VDC 100–240 VAC 24 VDC
External Service Power Supply (24VDC) mA 460 — 460 — 200 —
Power Supply Int. Bus (5VDC) mA 690 690 690 — — —
Integrated Inputs 24 (24 VDC) 24 (24 VDC) 24 (24 VDC) 24 (24 VDC) 24 (24 VDC) 24 (24 VDC)
Output Type Sink Trans. Source Trans. Source Trans. Relay Relay Source Transistor
ON Voltage (Max.) Relay version: < 264 VAC, < 30 VDC; Transistor version: 5 – 30 VDC
Max. Output CurrentPer Output (A) 0.5 0.5 0.5 2 2 0.5
Per 4 Outputs (A) 0.8 0.8 0.8 5 5 0.8
Weight (kg) 0.85 0.85 0.85 0.75 0.75 0.75
Dimensions (W x H x D) mm 182 x 90 x 87 182 x 90 x 87 182 x 90 x 87 150 x 90 x 87 150 x 90 x 87 150 x 90 x 87
Extension BoardsThe FX1N Series extension boards are available for the FX1S and FX1N main units and add 4 inputs or 2 outputs tothe system
Powered Extension UnitsThe FX2N / FX0N Series extension units are available with up to 48 integrated I/O with selectable relay or transistoroutput models.
Model Number FX1N-4EX-BD FX1N-2EYT-BD
Stocked Item S S
Rating UL • cUL • CE
Integrated Inputs 4 2
Power Supply 5 VDC (from main unit); 24 VDC / 25 mA (S/S terminal) 5 VDC (from main unit)
Integrated Outputs 4 —
Input LevelVoltage 24 VDC (+20% / -15%) —
Current 5 mA (24 VDC) —
Integrated Outputs — 2
Output Type — Transistor
Max. Switching Voltage — 5 – 30 VDC
Weight 0.02 0.02
Dimensions (W x H x D) mm 43 x 38.5 x 22 43 x 38.5 x 22
Applicable PLCs FX1S / FX1N FX1S / FX1N
FX Input / Output Expansion OptionsFX1N-2EYT-BD
ïB
Y0+B
Y0-B
Y1+B
Y1-
F1-FX 2009 3/27/09 5:44 PM Page 144
-
Mitsubishi Electric Automation | Programmable Logic Controllers FX Family 145
Model Number FX2N-8ER-ES/UL FX2N-8EX-ES/UL FX2N-8EX-UA1/UL FX2N-8EYR-ES/UL FX2N-8EYT FX2N-8EYT-ESS/UL
Stocked Item S S S S S S
Rating UL • cUL • CE UL • cUL• CE UL • cUL UL • cUL • CE — UL • cUL
Applicable PLCs FX3U / FX3UC / FX3G / FX1N
Integrated Inputs / Outputs 8 8 8 8 8 8
Power Supply All modular extension units are powered by the base unit
Integrated Inputs 4 (24 VDC) 8 (24 VDC) 8 (24 VDC) — — —
Integrated Outputs 4 — — 8 8 8
Output Type Relay — — Relay Sink Trans. Source Trans.
ON Voltage (Max.) Relay version: < 240 VAC, < 30 VDC; Transistor version: 5 – 30 VDC
Max.OutputCurrent
Per Output (A) 2 — — 2 0.5 0.5
Per 4 Outputs (A) 8 — — 8 0.8 0.8
5VDC Current Consumption (mA) 25 25 25 30 30 30
Weight (kg) 0.2 0.2 0.2 0.2 0.2 0.2
Dimensions (W x H x D) mm 43 x 90 x 87 43 x 90 x 87 43 x 90 x 87 43 x 90 x 87 43 x 90 x 87 43 x 90 x 87
Model Number FX2N-16EX-ES/UL FX2N-16EYR-ES/UL FX2N-16EYS FX2N-16EYT FX2N-16EYT-ESS/UL
Stocked Item S S S S S
Rating UL • cUL • CE UL • cUL • CE UL • cUL — UL • cUL
Applicable PLCs FX3U / FX3UC / FX3G / FX1N
Integrated Inputs / Outputs 16 16 16 16 16
Power Supply All modular extension units are powered by the base unit
Integrated Inputs 16 (24 VDC) — — — —
Integrated Outputs — 16 16 16 16
Output Type — Relay Triac (SSR) Sink Transistor Source Trans.
ON Voltage (Max.) Relay version: < 240 VAC, < 30 VDC; Transistor version: 5 – 30 VDC; Triac version: 85 – 242 VAC
Max.OutputCurrent
Per Output (A) — 2 0.3 0.5 0.5
Per 4 Outputs (A) — 8 0.8 0.8 1.6
5VDC Current Consumption (mA) 45 40 160 180 180
Weight (kg) 0.3 0.3 0.3 0.3 0.3
Dimensions (W x H x D) mm 40 x 90 x 87 40 x 90 x 87 40 x 90 x 87 40 x 90 x 87 40 x 90 x 87
Unpowered Extension UnitsThe FX2N Series 8 – 16 integrated I/O extension blocks are selectable with relay, transistor or triac outputs.
Model Number FX2NC-16EX-DS FX2NC-16EX-T-DS FX2NC-16EYR-T-DS FX2NC-16EYT-D/UL FX2NC-16EYT-DSS FX2NC-32EX-DS FX2NC-32EYT-D/UL
Stocked Item S S S S S – –
Rating UL • cUL • CE UL • cUL • CE UL • cUL • CE UL • cUL UL • cUL • CE UL • cUL • CE UL • cUL
Applicable PLCs FX3UC
Integrated Inputs / Outputs 16 16 16 16 16 32 32
Power Supply All modular extension units are powered by the base unit
Integrated Inputs 16 16 — — — 32 (24 VDC) —
Integrated Outputs — — 16 16 16 — 32
Output Type — — Relay Sink Trans. Source Trans.. — Sink Trans.
ON Voltage (Max.) Relay version: < 240 VAC, < 30 VDC; Transistor version: 5 – 30 VDC
Max.OutputCurrent
Per Output (A) — — 2 0.1 0.1 — 0.1
Per 4 Outputs (A) — — 4 0.8 0.8 — 0.8
5VDC Current Consumption (mA) 30 30 50 30 50 60 100
Weight (kg) 0.15 0.15 0.15 0.15 0.15 0.2 0.2
Dimensions (W x H x D) mm 14.6 x 90 x 87 20.2 x 90 x 89 24.2 x 90 x 89 14.6 x 90 x 87 14.6 x 90 x 87 26.2 x 90 x 87 26.2 x 90 x 87
FX2NC Unpowered Extension UnitsThe FX2NC Series extension blocks are available with 16 or 32 integrated I/O with selectable relay or transistor 16-output models.
IN
2
OUT
OUT
F1-FX 2009 3/27/09 5:44 PM Page 145
-
146
n
PR
OG
RA
MM
AB
LE
LO
GIC
CO
NT
RO
LL
ER
S F
X F
AM
ILY
Model Number FX2N-2AD FX2N-4AD FX2NC-4AD FX2N-8AD (*2)
Stocked Item S S S S
Rating UL • cUL • CE (EMC)
Power Supply5 VDC / 20 mA (from main unit)
24 VDC / 50 mA (from main unit)
5 VDC / 30 mA (from main unit)24 VDC / 55 mA
5 VDC / 50 mA(from main unit)
24 VDC / 130 mA
5 VDC / 50 mA(from main unit)24 VDC / 80 mA
Analog Channels (Input) 2 4 4 8
Analog Range 0 to 10 VDC / 0 to 5 VDC / 4 to 20 mA DC-10 to 10 VDC / -20 to 20 mA DC /
4 to 20 mA DC-10 to 10 VDC / -20 to 20 mA DC /
4 to 20 mA DC-10 to 10 VDC / -20 to 20 mA DC /
4 to 20 mA DC
ResolutionVoltage 2.5 mV (12 bit) 5 mV (11 bit + sign) 0.32 mV (15 bit + sign) 0.63 mV (14 bit + sign)
Current 4 µA (12 bit) 20 µA (10 bit + sign) 1.25 µA (14 bit + sign) 2.5 µA (13 bit + sign)
Overall Accuracyfor Fullscale
Voltage±1% ±1%
±0.3% – 0.5% (*1)± 0.3 – 0.5% (*1)
Current ± 0.5 – 1.0% (*1)
Related I/O Points 8 8 8 8
Weight (kg) 0.2 0.3 0.13 0.4
Dimensions (W x H x D) mm 43 x 90 x 87 55 x 90 x 87 20.2 x 90 x 89 75 x 90 x 75
Applicable PLCs FX3U / FX3UC / FX3G / FX1N FX3UC FX3U / FX3UC / FX1N
Notes:1. Dependent on the ambient temperature.2. The FX2N-8AD can be configured to accept standard analog inputs as well as selected temperature inputs such as K, T or J type thermocouples.
Analog Input Analog input modules can provide up to 8 analog inputs that are used to convert analog voltage or current signals into digital valueswhich can be used by the FX PLC.
Model Number FX1N-2AD-BD FX3G-2AD-BD FX3U-4AD-ADP FX3U-4AD FX3UC-4AD
Stocked Item S S S S –
Rating CE UL • cUL • CE
Power Supply 5 VDC (from main unit) 5 VDC (from main unit)5 VDC / 15 mA(from main unit)24 VDC / 40 mA
5 VDC / 110 mA(from main unit)24 VDC / 90 mA
5 VDC / 100 mA(from main unit)24 VDC / 80 mA
Analog Channels (Input) 2 2 4 4 4
Analog Range 0 to 10 VDC / 4 – 20 mA 0 to 10 VDC / 4 – 20 mA 0 to 10 VDC / 4 – 20 mA -10 to 10 VDC / -20 to +20mA/ 4 to 20 mA DC-10 to 10 VDC / -20 to +20mA/
4 to 20 mA DC
ResolutionVoltage 2.5 mV (12 bit) 2.5 mV 2.5 mV (12 bit) 0.32 mV (15 bit + sign) 0.32 mV (15 bit + sign)
Current 8 µA (11 bit) 8 µA (11 bit) 10 µA (11 bit) 1.25 µA (14 bit + sign) 1.25 µA (14 bit + sign)
Overall Accuracy for Fullscale ±1% ±1% ±0.5% – 1% (*1) ± 0.3 – 1% fullscale (*1) ± 0.3 – 1% fullscale (*1)
Related I/O Points 0 0 0 8 8
Weight (kg) 0.02 0.02 0.1 0.2 0.13
Dimensions (W x H x D) mm 43 x 38.5 x 22 35 x 51 x 29.2 17.6 x 90 x 89.5 55 x 90 x 87 20.2 x 90 x 89
Applicable PLCs FX1S / FX1N FX3G FX3U / FX3UC / FX3G FX3U / FX3UC / FX3G FX3UC
Model Number FX1N-8AV-BD FX3G-8AV-BD
Stocked Item S S
Rating CE
Power Supply 5 VDC from main unit
Analog Channels (Inputs) 8-bit 8-bit
Related I/O Points 0 0
Weight 0.02 0.02
Dimensions (W x H x D) mm 43 x 38.5 x 22 35 x 51 x 12
Applicable PLCs FX1S / FX1N FX3G
FX Analog Options
Analog SetpointThe analog setpoint boards provide 8 analog setpoint potentiometers to the FX system. Setpoints can be polledby the PLC and used as default values for timers, counters and data registers.
FX1N-8AV-BD
FX1N-2AD-BD
POWER
FX3U-4AD-ADP
24+
24-
V1+
CO
M4
I1+
CO
M1
V2+
I2+
CO
M2
V3+
I 3+
CO
M3
V4+
I4+
F1-FX 2009 3/27/09 5:44 PM Page 146
-
Mitsubishi Electric Automation | Programmable Logic Controllers FX Family 147
Analog OutputAnalog output modules provide up to 4 analog outputs that are used to convert digital values in the PLC tovoltage or current signals.
Model Number FX1N-1DA-BD FX3G-1DA-DB FX3U-4DA-ADP FX3U-4DA FX2N-2DA FX2N-4DA FX2NC-4DA
Stocked Item S S S S S S S
Rating CE UL • cUL • EC (EMC)
Power Supply 5 VDC (from main unit)5 VDC
(from main unit)
5 VDC / 15 mA (from main unit)
24 VDC / 150 mA
5 VDC / 120 mA(from main unit)
24 VDC / 160 mA
5 VDC / 30 mA(from main unit)24 VDC / 85 mA(from main unit)
5 VDC / 30 mA(from main unit)
24 VDC / 200 mA
5 VDC / 30 mA(from main unit)
24 VDC / 130 mA
Analog Channels (Output) 1 1 4 4 2 4 4
Analog Output Range 0 to 10 VDC /4 to 20 mA DC0 to 10 VDC /
4 to 20 mA DC0 to 10 VDC /
4 to 20 mA DC
-10 to 10 VDC /0 to 20 mA /
4 to 20 mA DC
0 to 10 VDC / 0 to 5 VDC /
4 to 20 mA DC
0 to 10 VDC /0 to 20 mA DC / 4 to 20 mA DC
-10 to 10 VDC /0 to 20 mA DC / 4 to 20 mA DC
ResolutionVoltage 2.5 mV (12 bit) 2.5 mV (12 bit) 2.5 mV (12 bit) 0.32 mV (15 bit + sign) 2.5 mV (14 bit) 5 mV (11 bit + sign) 5 mV (11 bit + sign)
Current 8 µA (11 bit) 8 µA (11 bit) 4 µA (12 bit) 0.63 µA (15 bit) 4 µA (12 bit) 20 µA (10 bit + sign) 20 µA (10 bit + sign)
Overall Accuracy for Fullscale ±1% ±1% ±5% – 1%* ±0.3% – 0.5%* ± 1%* ± 1%* ±0.5% –1%*
Related I/O Points 0 0 0 8 8 8 8
Weight (kg) 0.02 0.02 0.1 0.2 0.2 0.3 0.13
Dimensions (W x H x D) mm 43 x 38.5 x 22 35 x 51 x 29.2 17.6 x 90 x 89.5 55 x 90 x 87 43 x 90 x 87 55 x 90 x 87 24.2 x 90 x 89
Applicable PLCs FX1S / FX1N FX3G FX3U / FX3UC / FX3G FX3U / FX3UC / FX3G / FX1N FX3UC
Note: Dependent on the ambient temperature.
Note: When attaching the FX0N-3A or FX2N-5A analog modules to an FX3UC main unit, the FX2NC-CNV-IF interface adapter or the FX3UC-1PS-5V power supply unit is required.
Combination Analog Input / Output ModulesCombination analog input / output modules are used for both digital to analog and analog to digital conversion.
Model Number FX0N-3A FX2N-5A
Stocked Item S S
Rating CE (EMC) UL • cUL • EC (EMC)
Power Supply 5 VDC / 30 mA (from main unit)24 VDC / 90 mA (from main unit)5 VDC / 70 mA (from main unit)
24 VDC / 90 mA
AnalogChannels
Input 2 4
Output 1 1
Analog InputRange(Resolution)
Voltage 0 to 10 VDC (8 bit); 0 to 5 VDC (8 bit) -10 to 10 V (15 bit + sign)-100 to 100 mV (11 bit + sign)
Current 4 to 20 mA DC (8 bit) -20 to 20 m VDC (14 bit + sign)4 to 20 mA DC (14 bit)
Analog OutputRange(Resolution)
Voltage 0 to 10 VDC (8 bit); 0 to 5 VDC (8 bit) -10 to 10 VDC (12 bit)
Current 4 to 20 mA DC (8 bit) 0/4 to 20 mA DC (10 bit)
Overall Accuracy for Fullscale ±1% ±0.3 – 1%*
Related I/O Points 8 8
Weight (kg) 0.2 0.3
Dimensions (W x H x D) (mm) 43 x 90 x 87 55 x 90 x 87
Applicable PLCs FX3U / FX3UC / FX1N FX3U / FX3UC / FX3G / FX1N
FX Output OptionsPOWER
FX3U-4DA-ADP
24+
24-
V1+
CO
M4
I1+
CO
M1
V2 +
I2+
CO
M2
V3+
I 3+
CO
M3
V4 +
I4+
FX1N-1DA-BD
FX2N-2DA
FX -5A2N
24 V
AD / DA
F1-FX 2009 3/27/09 5:44 PM Page 147
-
148
n
PR
OG
RA
MM
AB
LE
LO
GIC
CO
NT
RO
LL
ER
S F
X F
AM
ILY
High Speed Counters and Pulse Train OutputThese high speed modules provide additional counting and pulse output features to the PLC.
Model Number FX2N-1HC FX2NC-1HC FX3U-4HSX-ADP FX3U-2HSY-ADP
Stocked Item S – S S
Rating UL • CUL • CE UL • CUL • CE (EMC) UL • CUL • CE
Signal Level 5, 12, 24 VDC / 7 mA 5 VDC Differential line driver
Power Supply5 VDC 90 mA (from main unit) 30 mA (from main unit)
24 VDC — 30 mA (from main unit) 60 mA (from main unit)
Maximum Connectivity — 2 2
CounterInputs 1 phase (1 input or 2 input); 2 phase ( 1 edge, 2 edge or 4 edge count) 4 —
Outputs — — 2
Max CountingFrequency
Input 50 kHz 1 phase: 200; 2 phase: 100 —
Output — — 200 kHz
Input Format 16 bit / 32 bit Differential line receiver (equivalent to AM26C32) photocoupler isolation on inputs
Type of Counter Up / down counter, ring counter —
Output Format — —Differential line driver (equivalent to
AM26C32) pulse/direction orforward/reverse rotation)
Counting Range(Up/Down & RingCounter)
16 bit 0 to 65,535 0 to 65,535 —
32 bit -2147483648 to +2147483647 -2147483648 to +2147483647 —
Output Type 2 x transistor ( 5 to 24 VDC / 0.5A) — less than 25 mA
Related I/O Points 8 8 4 (4 input) 4 (2 output points occupied per high speed output)
Weight (kg) 0.3 0.13 0.08 0.08
Dimensions (W x H x D) mm 55 x 90 x 87 20.2 x 90 x 89 17.6 x 90 x 89.5 17.6 x 90 x 89.5
Applicable PLCs FX3U / FX3UC FX3UC FX3U FX3U
Temperature Input OptionsThe analog temperature input modules are used for J and K type thermocouple and Pt100 temperature sensor input and temperaturecontrol. 2 open collector transistor outputs are available with the FX2N-2LC.
Model Number FX3U-4AD-PTW-ADP FX3U-4AD-PT-ADP FX3U-4AD-PNK-ADP FX3U-4AD-TC-ADP FX2N-4AD-TC FX2N-4AD-PT FX2N-2LC
Stocked Item – S – S S S S
Rating UL • CUL • CE (EMC) UL • CUL • CE
Power Supply5 VDC / 15 mA (from main unit)24 VDC / 50 mA
5 VDC / 15 mA (from main unit)24 VDC / 50 mA
5 VDC / 15 mA (from main unit)24 VDC / 50 mA
5 VDC / 15 mA (from main unit)24 VDC / 45 mA
5 VDC / 40 mA (from main unit)24 VDC / 60 mA
5 VDC / 30 mA (from main unit)24 VDC / 50 mA
5 VDC / 70 mA (from main unit)24 VDC / 55 mA
Analog Inputs 4 (Pt100 sensors) 4 (Pt100 sensors) 4 (Pt1000 or Ni1000) 4 (J or K type) 4 (J or K type) 4 (Pt100 sensors)2 points
(Thermocouple andPt100 sensor)
Compensated Temperature Range (°C) -100 to +600 -50 to +250
-50 to +250 (Pt1000)-40 to +110 (Ni1000)
-100 to +600 (J type)-100 to +1000 (K type)
-100 to +600 (J type)-100 to +1200 (K type) -100 to +600 -200 to +1300
Digital Outputs -1000 to +6000 -500 to +2500 -500 to +2500 (Pt1000)-400 to +1100 (Ni1000)-1000 to +6000 (J type)
-1000 to +10000 (K type)-1000 to +6000 (J type)
-1000 to +12000 (K type) -1000 to +60002 transistor output
points
Resolution (°C) 0.2 to 0.3 0.1 0.1 0.3 (J type)0.4 (K type)0.3 (J type)0.4 (K type) 0.2 – 0.3 0.1 or 1
Overall Accuracy for Fullscale ±0.5% – 1%* ±0.5% – 1%* ±0.5% – 1%* ±0.5% – 1%* ±0.5% – 1%* ±1.0%
±0.3% – 0.7% (±1 digit)*
Related I/O Points 0 0 0 0 8 8 8
Weight 0.1 0.1 0.1 0.1 0.3 0.3 0.3
Dimensions (W x H x D) mm 17.6 x 90 x 89.5 17.6 x 90 x 89.5 17.6 x 90 x 89.5 17.6 x 90 x 89.5 55 x 90 x 87 55 x 90 x 87 55 x 90 x 87
Applicable PLCs FX3U / FX3UC / FX3G FX3U / FX3UC FX3U / FX3UC / FX3G /FX1N
Note: Dependent on the ambient temperature.
FX High-Speed I/O and Positioning Expansion
FX -4AD-TC2N
A / D
X1/4 X6/7
X2/5X0/3
POWER
FX3U-4HSX-ADP
SG
SG
X6/
7X
2/5
X1/
4X
0/3
-+
-+
-+
-+
FX -1HC2N
F1-FX 2009 3/27/09 5:44 PM Page 148
-
Mitsubishi Electric Automation | Programmable Logic Controllers FX Family 149
Model Number FX3U-20SSC-HStocked Item SRating UL • cUL • CE (EMC)Number of Controllable Axes 2 axesRelated I/O 8
Connectable Servo Amplifier MELSERVO MR-J3-B Maximum 2 amplifiers can be connected; Standard cord length: Station-to-station maximum 20m, Long distance cord length: Station-to-station maximum 50mServo Bus SSCNET IIIScan Cycle 1.77 ms
Positioning
Method Increment / AbsoluteUser Units PLS, µm, 10-4 inch, mdegUnit Magnification 1, 10, 100, and 1,000-foldPositioning Range -2,147,483,648 – -2,147,483,648 PLSSpeed Units Hz, cm/min, 10deg/min, inch/minAcceleration /Deceleration Process
Trapezoidal acceleration/deceleration, S-pattern acceleration/deceleration: 1 to 500 ms.Only trapezoidal acceleration/deceleration is available for interpolation
Starting Time 1.6 ms or lessInterpolation Function 2-axis linear interpolation, 2-axis circular interpolation
Power Supply 24 VDC + 20% -15% Ripple (p-p) within 5%Power Consumption 5WWeight (kg) 0.3Dimensions (W x H x D) mm 55 x 90 x 87Applicable PLCs FX3U / FX3UC
2-Axis PositioningHigh-performance 2-axis positioning module featuring simultaneous and interpolated 2-axis positioning control. With its dedicatedsetup, monitor and testing software, FX Configurator-FP, all aspects of the servo system can be controlled.
Cam SwitchThe FX2N-1RM-E-SET is often called an electronic cam module. It can be used to replace a mechanical camming systemwith a virtual electronic cam sequence using a resolver module.Model Number FX2N-1RM-E-SETStocked Item SRating CENumber of Controllable Axes 1 using resolver F2-720RSVMaximum Connectivity 3Number of Cam Output I/O 48 outputs (32 may be ON at one time)Control Resolution 1 revolution of 720 divisions (0.5 degrees) or 360 divisions (1 degree)Response 415 rpm with 0.5 degrees or 830 rpm with 1 degreeON/OFF Frequency 8 times per CAM profile Resolver 3000 rpmMaximum Cable Length up to 100 mPower Supply 24 VDC (-15% to +10%); 300 mA (400 mA when 32 outputs are ON)Related I/O Points 8 (*1)Weight (kg) 0.5Dimensions (W x H x D) mm 55 x 111 x 97Applicable PLCs FX3U / FX3UC
Note 1: The number of related I/O points will always be 8, regardless of how many units are attached.
1-Axis Positioning The FX2N-1PG-E and FX2N-10PG positioning modules are extremely efficient single-axis positioning modules for controllingeither step drives or servo drives (by external regulator) with a pulse train.
Model Number FX2N-1PG-E FX2N-10PGStocked Item S SRating UL • cUL • CE UL • cUL • CE (EMC)Applicable PLCs FX3U / FX3UC / FX1NSignal Level 24 VDC / 40 mA 5 VDC / 100 mA; 24 VDC / 70 mAPower Supply 5VDC / 55 mA (from main unit) 5 VDC / 120 mA (from main unit)Accessible Axes 1 1Output Frequency Max. 100 kHz Max. 1 MHzRelated I/O Points 8 8Weight (kg) 0.3 0.2Dimensions W x H x D (mm) 43 x 90 x 87 43 x 90 x 87Function Servo / stepper pulse control Advanced servo / stepper control
2N-10PGFX
START
POWER
DOG
ERROR
X0 PGOX1 FP
RPCLR
øø
FX -20SSC-H3U
F1-FX 2009 3/27/09 5:44 PM Page 149
-
150
n
PR
OG
RA
MM
AB
LE
LO
GIC
CO
NT
RO
LL
ER
S F
X F
AM
ILY
Model Number FX3U-ENET FX2NC-ENET-ADPStocked Item S S
Rating UL • cUL • CE (EMC) UL • cUL • CE (EMC)
Max. Data Transmission 1023 words x 8 16 words
Power Supply 24VDC / 240 mA Supplied from PLC
Communication Cable Ethernet with RJ45 connector Ethernet with RJ45 connector
Communication Protocol MC Protocol, TCP / IP / UDP —
Related I/O Points 8 8
Communication With Mail Server SMTP / POP3 —
Maximum Transfer Rate 100 Mbps / 10 Mbps —
Maximum Segment Length 100 m —
Weight (kg) 0.3 0.1
Dimensions W x H x D (mm) 55 x 90 x 87 19 x 90 x 78
Applicable PLCs FX3U / FX3UC / FX3G FX1N / FX1S
Model Number FX3U-485ADP-MB FX3U-232ADP-MBStocked Item S S
Rating UL • cUL • CE (EMC)
Power Supply 5VDC / 20 mA (from main unit) 5VDC / 30 mA (from main unit)
Communication Speed RS-485 RS-232C
Communication Distance Max. 115.2 kbps Max. 115.2 kbps
Related I/O Points 0 0
Weight (kg) 0.08 0.08
Dimensions W x H x D (mm) 17.6 x 90 x 89.5 17.6 x 90 x 89.5
Applicable PLCs FX3U / FX3UC / FX3G FX3U / FX3UC / FX3G
Modbus and Serial Communication AdaptersThese communication special adapters support a wide range of serial communication standards including Modbus.
Ethernet The FX3U-ENET communication module enables 8 ports of simultaneous Ethernet communication with features suchas peer-to-peer, email send/receive options, and program upload/download. The FX2NC-ENET-ADP communicationspecial adapter is an Ethernet interface supporting 10BASE-T communication.
Model Number FX2N-232IF FX1N-232-BD FX1N-422-BD FX1N-485-BD FX3G-232-BD FX3G-422-BD FX3G-485-BD
Stocked Item S S S S S S S
Rating CE UL • cUL • CE (EMC) CE (EMC) UL • cUL • CE (EMC) CE CE CE
InterfaceRS-232 with
9-pole D-SUB connector
RS-232 with 9 poleD-SUB connector
RS-422 with 8 polemini DIN connector RS-485
RS-232 with 9 poleD-SUB connector RS-422 RS-485
Power Supply5 VDC / 40 mA (from min unit), 24VDC / 80 mA
5 VDC / 60 mA (from main unit)
5 VDC / 60 mA (from main unit)
5 VDC / 60 mA (from main unit)
5 VDC (from main unit)
5 VDC (from main unit)
5 VDC (from main unit)
Related I/O Points 8 — — — — — —
Weight (kg) 0.3 0.02 0.01 0.02 0.2 0.2 0.2
Dimensions (W x H x D) (mm) 55 x 90 x 87 43 x 38.5 x 22 43 x 38.5 x 20 43 x 38.5 x 22 35 x 51 x 17.2 35 x 51 x 14.9 35 x 51 x 29.2
Applicable PLCs FX3U / FX3UC FX1S / 1N FX1S / FX1N FX1S / 1N FX3G FX3G FX3G
Serial CommunicationThese communication expansion boards allow their respective FX main units to communicate with external devices andother FX main units over a variety of serial networks.
FX Communications and Networking Expansion
Networking Modules
RD
SD
110
330OPEN
POWER
FX3U-485ADP-MB
SG
RD
AR
DB
SD
AS
DB
RD
SD
110
330
OPEN
POWER
FX3U-232ADP-MB
RD
SD
POWER
RUN
C1
INIT.
C2
100M
C3
SD
C4
RD
C5
ERR.
C6
COM.ERR.
C7C8
10BASE-T/100BASE-TX
POWER
LINK
ACT
FX2NC-ENET-ADP
SD
RD
F1-FX 2009 3/27/09 5:44 PM Page 150
-
Mitsubishi Electric Automation | Programmable Logic Controllers FX Family 151
Model Number FX2N-32ASI-M
Stocked Item S
Rating CE
Master/Slave Master
Power Supply 5 VDC / 150 mA (from main unit) 24 VDC / 70 mA
Rating AS-interface standard
Related I/O Points 8
Weight 0.2 kg
Dimensions W x H x D (mm) 55 x 90 x 87
Applicable PLCs FX3U / FX3UC / FX1N
DeviceNetAllows the FX system to be a Group 2 slave station on a DeviceNet network.
AS-i Master ModuleAllows the attached FX main unit to be the master station on an AS-i network.
Model Number FX2N-64DNETStocked Item SRating UL • cUL • CE (EMC)Master/Slave Slave
Power Supply 5 VDC / Max. 12 mA (from main unit) 24 VDC / 50 mAI/O Points 8Weight 0.2Dimensions W x H x D (mm) 43 x 90 x 87Applicable PLCs FX3U / FX3UC
ProfibusPROFIBUS-DP allows for the implementation of decentralized control with comprehensive data and alarmprocessing capabilities. Easy setup is available by using the GX Configurator-DP software package.
CC-LinkCC-Link provides a deterministic network with communication speeds up to 10Mbps
Model Number FX3U-64DP-M FX3U-32DP FX2N-32DP-IF FX0N-32NT-DP
Stocked Item S S – S
Rating UL • cUL • CE UL • cUL • CE UL • cUL • CE UL • cUL • CE (EMC)
Master/Slave Master Slave Master Slave
Power Supply Internal 24 VDC / Max. 155 mA Internal 24 VDC / 145 mA 100 – 240 VAC (+10% / -10%) 50/60 Hz5VDC / max. 170 mA (from base
unit), 24VDC / 60 mAVersion V 1.0 connector V 1.0 connector V 1.0 connector V 1.0 connector
Communication Speed Max. 12 Mbps Max. 12 Mbps Max. 12 Mbps Max. 12 Mbps
Maximum Distance* 1,200 m 1,200 m 1,200 m 1,200 m
Maximum Number of Slaves 64 / Master — — —
Communication Distance (m) Max. 1200m (depends on communication speed)
Communication Cable Profibus cable with Profibus-DP connector
Related I/O Points 8 8 256 Max. 8
Dimensions W x H x D (mm) 43 x 90 x 89 43 x 90 x 89 75 x 98 x 87 43 x 90 x 87
Applicable PLCs FX3U / FX3UC FX3U / FX3UC / FX3G NA FX1N
Model Number FX2N-16CCL-M FX2N-32CCL FX3U-64CCL
Stocked Item S S S
Rating CE (EMC) CE (EMC) UL • cUL • CE (EMC)
Master/Slave Master Slave Intelligent device station (slave)
Applicable PLCs FX3U / FX3UC / FX1N. Cannot use with FX2N-32ASI-M AS-i interface master block FX3U/FX3UC/FX3G
Power Supply 24 VDC / 150 mA 5 VDC / 130 mA (from main unit)24 VDC / 50 mA 24 VDC / 220 mA
Version V 1.10 V 1.00 V 2.0
I/O Points 8 8 8
Weight 0.4 0.3 0.3
Dimensi