Furniture/Equipment - MicrosoftFurniture/Equipment 160720 AEC extension City of Bristol College 1 4...

NFurniture/Equipment

160720 AEC extension City of Bristol College

1 4 Nov 2016

N10A Initial Costing

N10

General fixtures/ furnishings/ equipment

No.

Section Revision History

Purpose

A Initial Costing 4th Nov 2016

Clauses amended in Revision A

This is the first revision stamp for this section. For all future revision stamps, details of all clauses amended at that revision will be included here.


2 4 Nov 2016

N10 General fixtures/ furnishings/ equipment

To be read with Preliminaries/General conditions.

PRODUCTS

130 LABORATORY FURNITURE• Item: -. • Design and installation: To BS EN 14056. • Manufacturer: See Minuites of meeting dated 4/5/12 with Provellio .

- Product reference: -. • Dimensions: -. • Performance: To BS EN 13150, grade -. • Worktops:

- Material: -. - Finish/ Colour: -. - Exposed edges: -.

• Pedestal units: - Material: -. - Finish/ Colour: -. - Exposed edges: -.

• Accessories/ Other requirements: -.

145 VANITY AND WASHROOM FURNITURE refer to Armitage Shanks in Section N13• Item: -. • Manufacturer: -.

- Product reference: -. • Dimensions: -. • Worktop: -.

- Finish/ Colour: -. - Edges: -.

• Doors/ Drawers/ Shelves: - Material: -. - Finish/ Colour: -. - Edges: -.

• Supports: -. • Other requirements: -.

160 SHELVING SYSTEM FOR GENERAL STORES AND LABS• Manufacturer: Contractor's choice.

- Product reference: SUBMIT PROPOSALS. • Shelves:

- Material: Hardwood edged plywood. - Finish/ Colour: Lacquered finish.

• Other components: End panels and Support brackets.



3 4 Nov 2016


195 NOTICEBOARDS• Type: -. • Use: -. • Manufacturer: Contractors Choice.

- Product reference: submit proposals. • Size: -. • Fire resistance: -. • Board:

- Covering finish/ Colour: submit proposals. • Frame: submit proposals.

- Finish/ Colour: submit proposals. • Other requirements: submit proposals.

200 WORKTOPS -• Manufacturer: Contractors Choice.

- Product reference: submit proposals. • Material: -. • Dimensions: -. • Exposed edges: -. • Support: -. • Other requirements: -.

220 LOCKERS changing Rooms and General area• Manufacturer: Garron Lockers Supreme or Premier range or similar.

- Product reference: tbc. • Standard: To BS 4680.

- Test level: Heavy. • Material: trespa or similar approved.

- Finish/ Colour: trespa or similar / colour to be confirmed. • Fittings:

- Coin operated locks;- Coat hooks;- Seats; and- Plinths.

• Other requirements: size min 900 x 300 x 450mm or equivilent volumeconfigurations - double on plinth, double on plinth with seat in front, triplesee drawings 110346/A/803 .

240 BLINDS roller blinds• Manufacturer: Silent Gliss or similar approved.

- Product reference: submit proposals. • Type: roller. • Material: fabric.

- Finish/ Colour: TBA with client. • Operation: Manual. • Accessories/ Other requirements: -.


4 4 Nov 2016

270A MIRRORS ABOVE WASH HAND BASINS -• Material: Class C safety glass to BS 6206 . • Quality: Free from tarnishing, discoloration, scratches and other defects visible in

the designed viewing conditions. Reflection undistorted. • Size: refer to toilet elevations, yet to be produced. • Backing: Aluminium foil. • Edges: -. • Fixing: CP dome top wood screws with polyethylene sleeves and washers. • Installation: Accurately with sides vertical.

470 EXTERNAL SIGNS : TO ELEVATIONS

See Drawings 110346/A/300 & 804 & P116 for design and location. Individual components mounted on render panels as M21 Provide samples for approval. Allow for all fixings in Austinetic Stainless steel and any pattresses required.

EXECUTION

710 MOISTURE CONTENT OF WOOD AND WOOD BASED BOARDS• Temperature and humidity: During delivery, storage, fixing and to handover

maintain conditions to suit specified moisture contents of timber components. • Testing: When instructed, test components with approved moisture meter to

manufacturer's recommendations.

770 TRIMS• Lengths: Wherever possible, unjointed between angles or ends of runs. • Running joints: Where unavoidable, obtain approval of location and method of

jointing. • Angle joints: Mitred.

COMPLETION

910 GENERAL• Doors and drawers: Accurately aligned, not binding. Adjusted to ensure smooth

operation. • Ironmongery: Checked, adjusted and lubricated to ensure correct functioning.

920 APPLIANCES• Test: Ensure that all functions and features work correctly. • Documentation: Submit guarantees, instruction manuals, etc.



5 4 Nov 2016


N13

Sanitary appliances and fittings

No.


Purpose

A Initial Costing 4th Nov 2016




6 4 Nov 2016

N13 Sanitary appliances and fittings

To be read with Preliminaries/ General conditions.

PRODUCTS

300 WCS AND CISTERNS -• WC standard: To DEFRA WC suite performance specification or equivalent

approved by relevant water company. • Type: Back to wall, concealed cistern. • Pan:

- Standards: Not applicable. - Manufacturer: Armitage Shanks or Similar Approved.

Product reference: S3056 Contour 21, standard height. - Material: Vitreous china, white.

• Seat and cover: - Standard: Not applicable. - Manufacturer: Armitage Shanks or similar approved.

Product reference: S4065 Contour 21 seat & cover, top fix hinges. - Material: -.

• Pan connector: - Standard: To BS 5627. - Manufacturer: Panekta pan connector.

Product reference: S4305 (converts to P trap). - Colour: -.

• Cistern: - Standard: Not applicable. - Manufacturer: Armitage Shanks or similar approved.

Product reference: S3643 Conceala plastic concealed cistern with pneumatic dual flush valve and internal overflow and a delayed action inlet valve such as Opella Torbeck Ecofil.

- Material: Vitreous china. - Colour and finish: To match pan.

• Flushing arrangement: Microvalve HP/LP ballvalve,. - Manufacturer: Armitage Shanks or similar approved.

Product reference: S4504 . - Operating control: Contemporary dual flushplate. - Water supply connection: -. - Flush volume: 4.5/3 litres.

• Flush pipe: -. - Manufacturer: -.

Product reference: -. - Material: -.

• Accessories: Armitage Shanks S4505 Simpla inlet connector. Sealing: joint between wc and panel sealed with white silicone sealant or similar approved.



7 4 Nov 2016


300A WC FOR AMBULANT WCS -• WC standard: To DEFRA WC suite performance specification or equivalent

approved by relevant water company. • Type: Back to wall, concealed cistern. • Pan:

- Standards: Not applicable. - Manufacturer: Armitage Shanks or Similar Approved.

Product reference: S3057 Contour 21, raised height. - Material: Vitreous china, white.

• Seat and cover: - Standard: Not applicable. - Manufacturer: Armitage Shanks or Similar Approved.

Product reference: S4066 Contour 21 seat no cover, top fix hinges and retaining buffers..

- Material: -. • Pan connector:

- Standard: To BS 5627. - Manufacturer: Panekta pan connector.

Product reference: S4305 (converts to P trap). - Colour: -.

• Cistern: - Standard: Not applicable. - Manufacturer: Armitage Shanks or Similar Approved.

Product reference: S3643 Conceala plastic concealed cistern with pneumatic dual flush valve and internal overflow and a delayed action inlet valve such as Opella Torbeck Ecofil.

- Material: Vitreous china. - Colour and finish: To match pan.

• Flushing arrangement: Microvalve HP/LP ballvalve,. - Manufacturer: Armitage Shanks or similar approved.

Product reference: S4504 . - Operating control: Contemporary dual flushplate. - Water supply connection: -. - Flush volume: 4.5/3 litres.

• Flush pipe: -. - Manufacturer: -.

Product reference: -. - Material: -.

• Accessories: Armitage Shanks S4505 Simpla inlet connector. Sealing: joint between wc and panel sealed with white silicone sealant. or similar approved.

311 DOCUMENT M PACKAGES TO DISABLED WC'S• Manufacturer: Armitage Shanks or similar approved.

- Product reference: Doc M Standard pack comprising Ventura high rise back to wall WC, spacer box, exposed cistern, flushpipe and front cistern lever assembly, plastic seat, Domex screws, Ventura handrinse basin with lever operated thermostatic mixer, plastic strainer waste, plastic bottle trap, concealed hangers, 4 x 60cm grab rails, 45cm grab rail, back rest rail and cushion support, hinged arm support and semi-recessed toilet roll holder. Cistern to have an internal overflow and a delayed action inlet valve such as Opella Torbeck Ecofil..

• Type approval certificate: Submit.


8 4 Nov 2016


311A DOCUMENT M PACKAGES TO ACCESSBLE SHOWER• Manufacturer: Armitage Shanks or similar approved.

- Product reference: Doc M sHOWER ROOM pack comprising, hinged seat, lever operated mixer, adjustable shower head, shower curtain and grab rails.

- Non slip floor laid o fall to drain • Type approval certificate: Submit.

315 URINALS AND AUTO FLUSHING CISTERNS – BOWL• Urinals:

- Standard: To BS 5520. - Manufacturer: Armitage Shanks or similar approved.

Product reference: S6110 Contour . - Material: Vitreous china, white.

• Wastes: Grated, domed. - Standards: To BS EN 274-1, -2 and -3. - Manufacturer: Armitage Shanks or similar approved.

Product reference: S8850. - Size: 38mm. - Material: plastic. - Tail: Unslotted.

• Traps: Tubular, P type. - Standards: To BS EN 274-1, -2 and -3. - Manufacturer: As Urinal.

Product reference: S8970. - Size: 38mm. - Material: plastic, and multi-fit outlet. - Depth of seal (minimum): 75 mm.

• Cistern, complete with automatic siphon, lid, supports and fixings: Concealed. - Standard: To BS 1876. - Manufacturer: Armitage Shanks or similar approved.

Product reference: S6270. - Material: Vitreous china, white. - Flush volume: 4.5 L. - Operating control: Automatic. - Flush pipe: pre-plumbed copper.

Product reference: -. Material: -.

• Accessories: with individual presence detectors. Armitage Shanks S6286 back inlet spreader, S9275 concealed steel hangers, S9276 toggle bolts. Sealing: joint between urinal bowl and panel sealed with white silicone sealant.


9 4 Nov 2016


331 SINKS Cleaners sink• Standard: -. • Manufacturer: Armitage Shanks or similar approved.

- Product reference: Wansbeck fireclay shelf sink with one soap tray and slot overflow, two tapholes.

• Size: 61x54x26cm. • Material: fireclay. • Tap/ Chainstay/ Overflow holes: Two tap holes and Overflow hole. • Water supply fittings: Pillar taps.

- Manufacturer: Nuastyle. Product reference: 1/2 " high neck sink with fitted metal handles, anti-vandal indices, antisplash outlets.

• Wastes: Chain and plug. - Standards: To BS EN 274-1, -2 and -3. - Manufacturer: As Sink.

Product reference: -. - Size: 1 1/2" . - Material: Brass, chrome plated. - Tail: 90mm Slotted, 85mm diameter flange, Ink chain, plastic plug and bolt stay.

• Traps: Tubular, P type. - Standards: To BS EN 274-1, -2 and -3. - Manufacturer: As Sink.

Product reference: -. - Size: -. - Material: -. - Depth of seal (minimum): 75 mm.

• Accessories: Ancillary Items: S9300, Extended tails for sink taps & mixers, 305mm long, Ancillary items: S9249 (polished) 650mm stainless steel legs & 455mm aluminium alloy brackets, 405mm stud..


10 4 Nov 2016


335 WASH BASINS – SEMI INSET• Manufacturer: Armitage Shanks or similar approved.

- Product reference: S2441. • Size: Profile 505mm. • Material: Vitreous china, white. • Tap/ Chainstay/ Overflow holes: One tap hole, centre and Overflow hole. Taps to

be spray taps.. • Water supply fittings: Washbasin mounted spout chrome plated tap with integral

valve, mains operated, to have a maximum flow rate less than 6 litres/ min for a water pressure of 0.3MPa.. - Manufacturer: Ideal Standard or similar approved.

Product reference: A4171. - Operation: Sensorflow 21.

• Wastes: S8722 1 1/4" chrome plated strainer waste. - Standards: To BS EN 274-1, -2 and -3. - Manufacturer: As Wash basin.

Product reference: -. - Size: -. - Material: Brass, chrome plated. - Tail: 80mm Slotted.

• Traps: Bottle- re-sealing. - Standards: To BS EN 274-1, -2 and -3. - Manufacturer: As Wash basin.

Product reference: S8920. - Size: 1 1/4". - Material: plastic. - Depth of seal (minimum): 75 mm.

• Accessories: Sealing: Joint between basin and vanity top sealed with white silicone sealant.Vanity top as .

343A VANITY UNITS Drawing references: 091052/ A/ 110 rev B & 111 rev B• Manufacturer: Amwell Systems or Similar Aprroved..

- Product reference: vanity Unit. • Top: 13mm thick compact laminate recessed into flush fitting powder coated (light

or dark grey) aluminium extrusion detail to front edge, all exposed compact laminate edges radiused and polished. Top comprises 350mm overall width bed with 300mm front downstand. 800mm overall height from FFL to top of bed. Underpanels: 13mm thick compact laminate.All edges radiused and polished. Colours: TBC - Standard Laminate Range from Manufacturer


11 4 Nov 2016


343B PANEL LINING SYSTEM Drawing references: 110346/A/802• Manufacturer: Amwell Systems or Similar Approved.

- Product reference: Contractor's choice. • Panel: 19mm thick high performance melamine faced 730kg/m3 grade moisture

resistant chipboard. Each panel section fitted to subframe with concealed BZP mild steel joggle clips, panel sections joined together with low carbon steel non intrusive locating clips. Subframe: Rolled metal section subframe with chipboard bracing board, fitted to site frame with nylon click-fix location brackets. Site framing: Extruded aluminium base, headrail sections, rolled metal wall channels. Flashgaps: 13mm thick compact laminate, with 6mm thick mdf packing pieces. Colours: TBC - Standard laminate Range from manufacturer


12 4 Nov 2016


346 WASHING TROUGHS In Workshops G20, G23, G28 and PW016, PW031• Manufacturer: Franke Sissons or similar approved.

- Product reference: Saturn Washtrough Wall mounted washtroughs with tap deck and optional rear splashbacksincorporating manual or electronic self-closing water controls, manufactured from1.2mm thick, grade 1.4301 (304) stainless steel SANX1201200mm Washtrough with Tap Deck for 2 usersSANX1801800mm Washtrough with Tap Deck for 3 users..

• Size: 1800 x 400 mm & 1200mm x 400mm in each workshop. • Material: Stainless steel, satin. • Water supply fittings: Thermostatic mixer photocell operated tap.

- Manufacturer: Suppliers recommendations. Product reference: Submit proposals.

- Operation: Proximity sensor. - Quantity: 3 units per1800mm trough & 2 units per 1200mm trough.

• Wastes: Grated. - Standards: To BS EN 274-1, -2 and -3. - Manufacturer: Submit proposals.

Product reference: Submit proposals. - Size: DN 40. - Material: Stainless steel. - Tail: Slotted.

• Traps: see M&E dwg M400 . - Standards: To BS EN 274-1, -2 and -3. - Manufacturer: Submit proposals.

Product reference: Submit proposals. - Size: DN 40. - Material: Stainless steel. - Depth of seal (minimum): 75 mm.

• Accessories: SANX120TDE1200mm Rear Splashback and tap mounting panel with electronic sensor andspouts for 2 users*SANX180TDE1800mm Rear Splashback and tap mounting panel with electronic sensor andspouts for 3 users*.


13 4 Nov 2016


375 SHOWER UNITS Male and Female showers• Tray: White Plastic with nonslip surface.

- Manufacturer: TBC. Product reference: TBC.

- Size: 900 x 900. - Material: Plastic.

• Shower fittings: Thermostatic shower mixer, exposed. - Manufacturer: Submit proposals.

Product reference: Submit proposals. - Finish: Chrome plated. - Operating control: Lever and temperature ring. Chrome plated 9 Litre perminuite

shower flow regulator to be fitted to all showers . • Wastes: Grated, top access .

- Standards: To BS EN 274-1, -2 and -3. - Manufacturer: Submit proposals.

Product reference: Submit proposals. - Size: DN 40. - Material: Stainless steel. - Tail: Unslotted.

• Traps: TBC. - Standards: To BS EN 274-1, -2 and -3. - Manufacturer: Submit proposals.

Product reference: Submit proposals. - Size: DN 40. - Material: Plastics, self colour. - Depth of seal (minimum): 50 mm.

• Enclosure: As K32 / 120A. - Manufacturer: Armitage Venesta or Similar Approved.

Product reference: TBC. • Accessories: TBC.

375A SHOWER UNITS DAFF AND AERO WORKSHOP - Hughes Safety Shower or Similar approved.

• Unheated Emergency Safety Shower with Eye / Facewash Fountain. - Stainless Steel. - Accessories:TBC - Signage above shower

436 HANDRAILS AND GRAB BARS Cubicle Access Door Handle Set• Manufacturer: Contractors Choice.

- Product reference: TBC. • Material: Powder coated light grey or dark grey - Contrasting Colour to Cubicle

walls. • Finish: -

2 no. cubicle access door handle set suitable for Ambulant & Enlarged cubicles.Back to back through fixing for 19mm & 13mm thick doors. Powder coated light grey (RAL 9006) finish. Ref: 0500102. Powder coated Dark grey (RAL 7024) finish. Ref: 0500103.


14 4 Nov 2016


436A HANDRAILS AND GRAB BARS Ambulant Cubicle Grab Rail Set• Manufacturer: Contractors Choice.

- Product reference: Standard" grab rail (White - Contrasting colour to Cubicle walls).

• Material: 3 no. 600mm white polyester coated steel rails with concealed fixings. Ref: 0500001.

• Finish: -Intermediate fixing kit, suitable for back to back, single cubicle or structural wall fixing. Ref: 0500022.

OR

"Standard" Grab Rail (Blue) 3 no. 600mm blue (RAL 5011) polyester coated steel rails with concealed fixings. Ref: 0500002. Intermediate fixing kit, suitable for back to back, single cubicle or structural wall fixing. Ref: 0500022.

438 MIRRORS refer to clause N10• Manufacturer: -.

- Product reference: -. • Material: -. • Finish: -.

442 PAPER TOWEL DISPENSERS• Manufacturer: Initial or similar approved.

- Product reference: Paper Towel Dispenser. • Material: -. • Finish: -.

458 SOAP DISPENSERS -• Manufacturer: Initial or similar approved.

- Product reference: Contractor's choice. • Material: -. • Finish: -.

472 HAND DRIERS -• Type: Contractor's Choice. • Manufacturer: Contractor's choice.

- Product reference: Submit proposals. • Electrical supply: refer to manufacturers recommendations.


15 4 Nov 2016

EXECUTION

610 INSTALLATION GENERALLY• Assembly and fixing: Surfaces designed to falls to drain as intended. • Fasteners: Nonferrous or stainless steel. • Supply and discharge pipework: Fix before appliances. • Fixing: Fix appliances securely to structure. Do not support on pipework. • Jointing and bedding compounds: Recommended by manufacturers of

appliances, accessories and pipes being jointed or bedded. • Appliances: Do not use. Do not stand on appliances. • On completion: Components and accessories working correctly with no leaks. • Labels and stickers: Remove.

613 COMPATIBILITY OF COMPONENTS• General: Each sanitary assembly must consist of functionally compatible

components, preferably obtained from a single manufacturer. - Exceptions: -.

620 NOGGINGS AND BEARERS• Noggings, bearers, etc. to support sanitary appliances and fittings: Position

accurately. Fix securely.

630 TILED BACKGROUNDS OTHER THAN SPLASHBACKS• Timing: Complete before fixing appliances. • Fixing appliances: Do not overstress tiles.

650 INSTALLING WC PANS• Floor mounted pans: Screw fix and fit cover caps over screw heads. Do not use

mortar or other beddings. • Seat and cover: Stable when raised.

670 INSTALLING CISTERNS• Cistern operating components: Obtain from cistern manufacturer.

- Float operated valve: Matched to pressure of water supply. • Overflow pipe: Fixed to falls and located to give visible warning of discharge.

- Location: Agreed, where not shown on drawings.

710 INSTALLING TAPS• Fixing: Secure against twisting. • Seal with appliance: Watertight. • Positioning: Hot tap to left of cold tap as viewed by user of appliance.

720 INSTALLING WASTES AND OVERFLOWS• Bedding: Waterproof jointing compound. • Fixing: With resilient washer between appliance and backnut.



16 4 Nov 2016


N15

Internal fire and safety signage systems

No.


Purpose

A Initial Costing 21st Feb 2012




17 4 Nov 2016

N15 Internal fire and safety signage systems

To be read with Preliminaries/ General Conditions.

GENERAL

SYSTEM PERFORMANCE

210 GENERAL REQUIREMENTS• Signage system design:

- Complete to: BS 559 and BS ISO 16069. - Comply with the requirements of: Fire Strategy Report .

• Proposals: Submit drawings, schedules, technical information, calculations and manufacturer's literature.

240 SIGNAGE SYSTEM SPECIFICATION• Content: Signs including facing information, components, inserts, accessories and

fixings necessary to complete the system. • Geometric shapes, colours and layout: To BS 5499-1.

- Font: Helvetica medium. • Escape route: In accordance with BS 5499-4 and BS ISO 16069 • Safety meaning: In accordance with BS 5499-5. • Water safety: In accordance with BS 5499-11.

290 SIGNAGE SAMPLES • Sign type: Fire .

- Action: Submit labelled samples. - Conformity: Retain samples on site for the duration of the contract or until

instructed to remove. - Delivered products: To conform with labelled samples

PRODUCTS

305 INTERNAL SIGNAGE PRODUCTS GENERALLY• Standard: To BS 559. • Colorimetric and photometric properties: To BS 5378-2.

340 STAINLESS STEEL PLATE TYPE 1• Manufacturer: Submit proposals .

- Product reference: Submit proposals . • Component thickness: 2 mm . • Finish: Grade 1.4301 (304) to BS EN 10088-2 . • Perimeters: Radiused corners .



18 4 Nov 2016

340A STAINLESS STEEL PLATE TYPE 1• Manufacturer: Submit proposals .

- Product reference: Submit proposals . • Component thickness: 2 mm . • Finish: Grade 1.4301 (304) to BS EN 10088-2 . • Perimeters: Radiused corners .

See Drawing 110346/A/805

400 PHOTOLUMINESCENT SIGNS• Standard: In accordance with Photoluminescent Safety Products Association

(PSPA) Standard 002 part 1. • PSPA material: Class I . • Manufacturer: Submit proposals .

- Product reference: Submit proposals . • Base material: Aluminium . • Component thickness: 2 mm . • Finish: Anodized to BS 3987 . • Perimeters: Radiused corners .

EXECUTION

610 FIXING SIGNS GENERALLY• Installation: To BS 559.

- Secure, plumb and level. • Fasteners and adhesives: As section Z20. • Strength of fasteners: Sufficient to support live and dead loads. • Fasteners for external signs: Corrosion resistant material or with a corrosion resistant

finish. Isolate dissimilar metals to avoid electrolytic corrosion. • Fixings showing on surface of sign: Must not detract from the message being

displayed.

COMPLETION

910 DOCUMENTATION• Submit:

- Manufacturer's maintenance instructions. - Guarantees, warranties, test certificates, record schedules and logbooks.



19 4 Nov 2016


N25

Permanent access and safety equipment

No.


Purpose

A Initial Costing 21st Feb 2012




20 4 Nov 2016

N25 Permanent access and safety equipment

To be read with Preliminaries/ General conditions.

TYPES OF SYSTEM/ EQUIPMENT

215 GUIDED FALL ARREST SYSTEMGUIDED TYPE FALL ARREST SYSTEM FOR ROOF MAINTENANCE ACCESS TO STANDING SEAM ROOF AREAS

Manufacturer and reference: Submit proposals " Guided Type Fall Arrest System; for Kalzip Standing Seam Roofing

" System to be CE marked and hold EC Declarations of Conformity.

- Anchorage device: For attachment to bulb type standing seam using 4 split clamps per post. - Overall system length:see drawing system comprising roof gutter systems and single runs to allow for restraint access along the length of the vertical glazing and roof light. - Intermediate support spacing:, Between 6 and 10m - as designed by approved installer - System access to be from Access ladders from plant enclosures - System to be installed in accordance with BS 7883 by the system manufacturer or a installer approved by the system manufacturer and verified by the system manufacturer. - On completion of the installation, system to be inspected and fully tested and a test certificate covering a period of 12 months to be issued. Notice showing date and period of validity of the test certificate to be attached to the system at each access point - 5 complete sets of Personal Protective Equipment PPE to be supplied with the system. Set to comprise:

1 x Full body harness 1 x 2m fixed energy absorbing twin lanyard 1x Removable Transfastener All to be supplied in a suitable PPE storage holdall

-Structural anchors: Type recommended by the system manufacturer to suit the structure/fabric into which they will be fixed.

430 SAFETY• General: The equipment as installed must have no irregularities/ projections

capable of inflicting personal injury. • Finished surfaces and edges of all accessible parts: Regular and smooth.

440 DESIGN LIFE/ MAINTENANCE PROGRAMME• Design life of access/ safety system: Not less than 35 years. • Schedule for maintenance and for replacement of components: Submit.



21 4 Nov 2016


450 TESTING OF PERMANENT SUSPENDED ACCESS EQUIPMENT• Pre-installation testing: Test roof rig at manufacturer's/ supplier's works. The rig must

be capable of lifting and sustaining a proof load of 125% of the specified rated load without suffering damage or permanent deformation.

• Post-installation testing: Immediately on completion of installation, or when otherwise agreed, examine and test the complete installation in accordance with recommendations given in BS 6037-1, clause 14. Give adequate notice of testing arrangements.

• Certificates for works and site testing: Submit within 7 days of completion of satisfactory acceptance tests.

460 ASSESSMENT/ TESTING OF FIXING POINTS FOR ANCHOR DEVICES• Design and installation of fixings in steelwork or timber: Verified by calculation to be

capable of sustaining the relevant static and dynamic test forces specified in BS EN 795, clause 4.3.

• Fixings in other materials: Verify suitability by carrying out a test in a sample of the material. The sample must be capable of sustaining the relevant static and dynamic test forces specified in BS EN 795, clause 4.3. Thereafter, each structural anchor installed in that material must be subjected to an axial pull out force of 5 kN to confirm the soundness of the fixing. The structural anchor must sustain the force for a minimum of 15 seconds.

FABRICATION, ASSEMBLY AND INSTALLATION

510 FABRICATION AND ASSEMBLY GENERALLY• Machine cutting, drilling and assembly: Carry out as much as possible in the

workshop. Obtain approval for any reassembly on site. • Dissimilar metal surfaces of assembly components/ supports/ fixings: Isolate to

prevent electrolytic corrosion.

520 PROTECTION• General: Do not deliver to site any components or assemblies that cannot be

installed immediately or unloaded into a suitable well protected storage area.

530 SUITABILITY OF STRUCTURE/ FABRIC• Visual and geometric survey of supporting structure and fabric: Carry out before

commencing installation of access/ safety system. Report immediately if structure/ fabric will not allow required accuracy/ security of erection/ fixing.


22 4 Nov 2016


535 EXECUTION GENERALLY• Structural members: Do not modify, cut notch or make holes in structural members

without permission. • Frameworks: Assemble and brace, including temporary members required for

installation. - Temporary support: Do not use access systems as temporary support or strutting

for other work. • Bolted joints:

- Contact between dissimilar metals: Avoid. - Bolts and washers: Select types, sizes and quantities of fasteners or packings and

spacings to retain supported components without distortion or loss of support. • Welded joints: Comply with latest edition of National Structural Steelwork

Specification (NSSS), Section 5. • Finished components: Smooth, free from distortion, cracks, burrs and sharp arrises.

540 MECHANICAL FIXINGS• Materials: Unless otherwise recommended by equipment manufacturer:

- Connecting bolts and other fixings fully accessible for inspection: Mild steel hot dip galvanized to BS 7371-6.

• Nuts: Tapped after galvanizing. - Cast-in anchors and other fixings not accessible for routine inspection: Austenitic

stainless steel, grade 1.4401 (316) to BS EN 10088-1.

550 FASTENERS, INSERTS AND BOLTS FOR BUILDING IN• Supplier: Equipment manufacturer/ supplier.

560 FIXINGS FOR SECURING EQUIPMENT• Adjustment capability: Adequate three dimensional adjustment to accommodate

building structure/ fabric irregularities.

570 FIXING ANCHOR INSTALLATION• Site drilling or cutting into structure/ fabric: Permitted only in approved locations. • Distance between all fixing devices and edges of supporting material: Not less

than recommended by fixing manufacturer.

610 IDENTIFICATION AND REGISTRATION LABELS FOR OTHER EQUIPMENT Guided fall arrest system

• Provision: Provide and fix to each piece of equipment a permanent label giving: - Manufacturer's name, address and telephone number. - Name and/ or reference code of model. - Serial number and year of manufacture. - Maximum load (in kilograms) that may be sustained by the equipment.

• Location: In positions such that labels can be easily read.

615 CE MARKING AND DECLARATION OF CONFORMITY OF PERMANENTLY INSTALLED SUSPENDED ACCESS EQUIPMENT

• Marking: Equipment to be clearly labelled with a CE mark indicating conformity with the current edition of the Supply of Machinery (Safety) Regulations.

• Declaration of conformity: Provide for the complete installation a declaration of conformity with Machinery Directive 2006/42/EC together with certificates of incorporation for parts not supplied or installed by the main equipment manufacturer or supplier.


23 4 Nov 2016

820 OPERATING INSTRUCTIONS• Equipment and accessories: Where appropriate, mark in such a way that it is

possible to identify the correct mode of operation for their safe use.

830 OPERATING AND MAINTENANCE MANUAL• General: Provide, for inclusion in the Building Manual, printed instructions and

recommended procedures to be established by the Employer for operating and routinely maintaining the equipment. Provide diagrams where appropriate.

• Content: - Instructions for assembling/ erecting equipment for use. - Comprehensive operating instructions, including safety and emergency

procedures, for all motions including upward, downward and lateral travel, and slew.

- Servicing and planned maintenance procedures, including assembly instructions where maintenance necessitates dismantling of machinery parts.

- List of replacement parts, with references. - Recommended procedures for testing equipment.

840 AS INSTALLED DRAWINGS• General: After commissioning/ testing of the equipment provide as installed

drawings for inclusion in the Building Manual. - Number of sets: 2 plus electronic pdf files.

• Drawing content: - Contractor's name and contract number. - Location and date of installation. - Manufacturer's name, model and type numbers. - General arrangement of the complete installation. - Electrical circuit wiring diagrams complete with details and ratings of all items of

equipment.



24 4 Nov 2016

Furniture/Equipment - MicrosoftFurniture/Equipment 160720 AEC extension City of Bristol College 1 4...

Documents

Transcript of Furniture/Equipment - MicrosoftFurniture/Equipment 160720 AEC extension City of Bristol College 1 4...