FS-Connect Piping System Quick Reference Guide[1/2"] [7/8"] [1 1/2"] [2"] [2 1/2"] [3"] [4"] [6"]

Pipe ØOD (in) L (ft) ColorF1013A170400 1/2 10 BlueF1014A1704 1/2 15 BlueF1013A250400 7/8 10 BlueF1016A250400 7/8 20 BlueF1013A400400 1 1/2 10 BlueF1016A400400 1 1/2 20 BlueF1013A5004 2 10 BlueF1016A5004 2 20 BlueF1013A6304 2 1/2 10 BlueF1016A6304 2 1/2 20 BlueFTA16L104 3 20 BlueFTA16L304 4 20 BlueFTA16L804 6 20 Blue

Flexible Hoses ØID (in) L (ft)F1001E250001 7/8 1' 10"F1001E250003 7/8 5'F1001E250004 7/8 6' 7"F1001E400002 1 1/2 3' 3"F1001E400004 1 1/2 6' 7"F1001E400005 1 1/2 9' 10"F1001E500009 2 3' 3"F1001E500004 2 6' 6"F1001E630008 2 1/2 4' 7"F1001E630005 2 1/2 9' 10"F1001E630006 2 1/2 13' 1"FFP01L101 3 4' 11"FFPL102 3 6' 6"FFP01L302 4 6' 6"FFP01L303 4 9' 10"

45° elbow ØOD (in)F66122500 7/8F66124000 1 1/2F66125000 2F66126300 2 1/2FRX12L100 3FRX12L300 4FRX12L800 6

Male threaded 45° elbow, NPT ØOD (in) NPT (in)F66192522 7/8 1/2F66192528 7/8 3/4F66192535 7/8 1F66194035 1 1/2 1F66194043 1 1/2 1 1/4F66194050 1 1/2 1 1/2F66194044 1 1/2 2F66195050 2 1 1/2F66195044 2 2F66196344 2 1/2 2

Male NPT threadedconnector ØOD (in) NPT (in)F66051714 1/2 1/4F66051722 1/2 1/2F66052522 7/8 1/2F66052528 7/8 3/4F66052535 7/8 1F66054035 1 1/2 1F66054043 1 1/2 1 1/4F66054050 1 1/2 1 1/2F66054044 1 1/2 2F66055050 2 1 1/2F66055044 2 2F66056344 2 1/2 2F66056341 2 1/2 2 1/2F66056346 2 1/2 3

90° elbow ØOD (in)F66021700 1/2F66022500 7/8F66024000 1 1/2F66025000 2F66026300 2 1/2FRX02L100 3FRX02L300 4FRA02L800 6

Cartridge (spare) ØOD (in)FRR00L100 3FRR00L300 4

Male threaded 90° elbow, NPT ØOD (in) NPT (in)F66091714 1/2 1/4F66091722 1/2 1/2F66092522 7/8 1/2F66092528 7/8 3/4F66092535 7/8 1F66094035 1 1/2 1F66094043 1 1/2 1 1/4F66094050 1 1/2 1 1/2F66094044 1 1/2 2F66095050 2 1 1/2F66095044 2 2F66096341 2 1/2 2 1/2F66096346 2 1/2 2 1/2

Anti whip-lashstrap L (ft)F66989903 3' 3"

Male NPTstud nut ØOD (in) NPT (in)F66111722 1/2 1/2F66112522 7/8 1/2F66112528 7/8 3/4F66112535 7/8 1F66114035 1 1/2 1F66114043 1 1/2 1 1/4F66114050 1 1/2 1 1/2F66114044 1 1/2 2F66116344 2 1/2 2F66116341 2 1/2 2 1/2

Aluminum Piping System Designed by Parker Transair

Pipe-to-pipeConnector ØOD (in)F66061700 1/2F66062500 7/8F66064000 1 1/2F66065000 2F66066300 2 1/2FRR01L100 3FRR01L300 4FRR01L800 6F66762500* 7/8F66764000* 1 1/2F66765000* 2F66766300* 2 1/2* Vented

Equal tee ØOD (in)F66041700 1/2F66042500 7/8F66044000 1 1/2F66045000 2F66046300 2 1/2FRAX4L100 3FRAX4L300 4FRA04L800 6

Ball valve ØOD (in)FVR01L100 3FVR01L300 4

End cap ØOD (in)F66251700* 1/2F66252500* 7/8F66254000* 1 1/2F66255000* 2F66256300* 2 1/2FRX25L100 3FRX25L300 4FRA25L800 6

Simple reducingbracket ØOD (in) NPT (in)FRA692517 7/8 FRA694025 1 1/2FRA695025 2FRA6825N04 7/8 1/2FRA6840N04 1 1/2 1/2FRA6850N04 2 1/2FRA6850N08 2 1FRR63L1N08 3 1FRR63L3N08 4 1FRR63L8N12 6 1 1/2FRR63L8N16 6 2

Manifolds ØOD (in) NPT (in) PortsF6651251204 7/8 4F6651401204 1/2 4F6653252206 7/8 1/2 6F6653402206 1/2 1/2 6

Reducingtee ØOD1 (in) ØOD2 (in)F66045025 2 7/8F66045040 2 1 1/2F66046340 2 1/2 1 1/2F66046350 2 1/2 2FRX24L140 3 1 1/2FRX24L150 3 2FRX24L163 3 2 1/2FRX24L340 4 1 1/2FRX24L363 4 2 1/2FRX04L3L1 4 3FRA04L8L3 6 4FRA04L8L1 6 3FRA04L863 6 2 1/2F66045025 2 7/8F66045040 2 1 1/2F66046340 2 1/2 1 1/2F66046350 2 1/2 2

Quick assemblybracket ØOD1 (in) ØOD2 (in)F66622517 7/8 1/2F66622500 7/8 7/8F66624017 1 1/2 1/2F66624025 1 1/2 7/8F66625025 2 7/8F66626325 2 1/2 7/8

90° wall bracket with ballvalve ØOD (in) NPT (in) PortsF66751722 1/2 1/2 2F66752522 7/8 1/2 2

3 port wall bracket with ballvalve ØOD (in) NPT (in) NPT (in)F66382522 7/8 1/2 1/2

Quick assembly mini-bracket with female thread, NPT ØOD (in) NPT (in)F66632522 7/8 1/2F66634022 1 1/2 1/2F66636322 2 1/2 1/2F66636328 2 1/2 3/4

Plug-inreducer ØOD1 (in) ØOD2 (in)F66661725 7/8 1/2F66662540 1 1/2 7/8F66664063 2 1/2 1 1/2F66664050 2 1 1/2F66665063 2 1/2 2FRX64L150 3 2FRX64L163 3 2 1/2FRX64L363 4 2 1/2FRX66L3L1 4 3FRA66L8L3 6 4FRA66L8L1 6 3

Male NPT threadedconnector ØOD (in) NPT (in)F66152522 7/8 1/2F66152528 7/8 3/4F66152535 7/8 1F66154043 1 1/2 1 1/4F66154050 1 1/2 1 1/2

* Vented

Male NPTadapter ØOD (in) NPT (in)F66211722 1/2 1/2F66212522 7/8 1/2F66212528 7/8 3/4F66212535 7/8 1F66214043 1 1/2 1 1/4F66214050 1 1/2 1 1/2FRR21L1N20 3 2 1/2FRR21L1N24 3 3

Pipe cutter F66980301 Ø 1/2" - 3"FEW080003 Ø 4" - 6"

Replacement cutterwheels FEW080099 F66980301FEW080004 FEW080003

Tool caseF66980005

Drilling jig forrigid aluminumpipeF66980103

Used for Transair pipe

Used for pipe cutter

Drilling tool ØOD (in)F66980202 5/8F66980201 7/8FEW090022* 7/8FEW090030* 1 3/16FEW090051* 2FEW090064* 2 1/2

Marking toolF66980403

Deburring toolF66980402

Portable tool kitFEW010002

Jaws for portabletool ØOD (in)FEW02L100 3FEW02L300 4FEW02L800 6

14V battery forportable toolFEW030001

Chamfer toolF66980401

Spanner wrenchesF66980403

Pressurized system drillingtool, BSPP ØOD (in)FEA980600 1/2

* Includes center drill

U-channel L (ft)F66990101 6' 5"

U-channel fixingbracketF66990102

Threaded rodadapterF0169000500

SUITABLE FLUIDS:• Compressed air (dry, wet, lubricated)• Vacuum• Inert gases(Please consult us for other fluids)

MAXIMUM WORKING PRESSURE:188 psi from -4°F to +140°F232 psi from -4°F to +115°F(*Max. working pressure for 6" is 188 psi)

VACUUM LEVEL: 98.7 % (29.6" Hg)WORKING TEMP: -4°F to +140°FSTORAGE TEMP: -40°F to +176°F

RESISTANCE TO:• Corrosion• Mineral compressor oils• Aggressive environments• Synthetic compressor oils• Mechanical shocks• Compressor oil carry over• Thermal variations• Ultraviolet (UV)

MATERIALS:• Fiberglass reinforced polyamide• Plated brass• Stainless steel• Powder-coated aluminum• Nitrile seals

The FS-Curtis Aluminum Piping System is a fast, flexible and easy to modify aluminum pipe system for compressed air applications. Quick connections eliminate the need to thread or solder pipe. The lightweight aluminum pipe is easy to handle and safe to work with on elevated platforms. This system offers significant savings on installation, maintenance and operating costs, making it the most cost effective and efficient pipe system for compressed air.

The FS-Curtis Aluminum Piping System’s additional benefits include:

• Energy efficient

• Lower installation costs

• Push-to-connect technology

• Immediate pressurization

• Removable and reusable

• Modular design

• No corrosion

• Leak-free guarantee

• Full bore design

• 1/2" - 6" pipe sizes

The material used to manufacture the pipe and fittings are 100% recyclable. The FS-Curtis Aluminum Piping System pipe and fittings are guaranteed silicone free.

1/2" (16.5 mm)7/8" (25 mm)1 1/2" (40 mm)2" (50 mm)2 1/2" (63 mm)3" (76 mm)4" (101 mm)6" (168 mm)

Innovative Compressed Air Pipe Systems

Technology

CERTIFICATIONS AND GUARANTEES PIPE SIZES

Pipe-to-pipe and male connectors in Ø 1/2", Ø 7/8" and Ø 1 1/2" can be immediately connected to pipe – simply push the pipe into the connector up to the connection mark. The gripping ring of each fitting is then automatically secured and the connection is safe.

Pipe-to-pipe and male connectors in Ø 2" and Ø 2 1/2" can be quickly connected to aluminum pipe by means of a snap ring. This secures the connection between the nut and the pipe – tightening of the nuts secures the final assembly.

Pipe-to-pipe and male connectors in Ø 3", Ø 4" and Ø 6" can be quickly connected to aluminum pipe. Position the pipes to be connected within a cartridge and close/tighten the clamp.

cartridge clamp pipe

lug socket head screw

seal

gripping ringsealtightening marks

bodynut pipe

bodynut pipe

seal snap ring

Ø 1/2" (16.5 mm) – Ø 7/8" (25 mm) – Ø 1 1/2" (40 mm)

Ø 2" (50 mm) – Ø 2 1/2" (63 mm)

Ø 3" (76 mm) – Ø 4" (100 mm) – Ø 6" (168 mm)

Threaded tee ØOD (in) NPT (in)FRX20L1N04 3 1/2FRX20L3N04 4 1/2

Double femalevalve ØOD (in)F40891700* 1/2F40892500* 7/8F40991700 (lockable) 1/2F40992500 (lockable) 7/8F40024000 1 1/2F40925000* (lockable) 2F40026300* 2 1/2F40126300* (lockable) 2 1/2

Spacer Offset Height (in)F66970003 1 3/4

Light serieshose reel L (ft)F66981111 25F66981112 50

Flange ØOD (in)FRX30L100 3FRX31L100* 3FRX30L300 4FRX31L300* 4FRA31L800* 6

Flange gasket ØOD (in)FEW05L100 3FEW05L300 4FEW05L800 6

Flange bolt kit ØOD (in)FEW060001 3, 4FEW060005 6

Fixing clip for rigid pipe ØOD (in)F66971701 1/2F66972501 7/8F66974001 1 1/2F66975001 2F66976301 2 1/2FEX01L100 3FER01L100* 3FEX01L300 4FER01L300* 4FER01L800* 6

Butterfly valve ØOD (in)FVR03L100 3FVR03L300 4FVR03L800 6

Butterfly valve ØOD (in)F42304000 1 1/2

Pressurized systembracket ØOD (in) BSPPFEA980601 7/8 1/2FEA980602 1 1/2 1/2FEA980604 2 1/2FEA980603 2 1/2 1/2

45° wallbracket ØOD (in) NPT (in) PortsF66401722 1/2 1/2 1F66402522 7/8 1/2 1F66422222 1/2 1F66891722 1/2 1/2 2F66892522 7/8 1/2 2F66912222 1/2 2

45° wall bracket with ballvalve ØOD (in) NPT (in) PortsF66791722 1/2 1/2 1F66792522 7/8 1/2 1F66941722 1/2 1/2 2F66942522 7/8 1/2 2

90° wallbracket ØOD (in) NPT (in) PortsF66841722 1/2 1/2 2F66842522 7/8 1/2 2F66882222 1/2 2

3 port wallbracket ØOD (in) NPT (in) NPT (in)F66962522 7/8 1/2F66362822 3/4 1/2

Quick assemblybracket withpre-assembled ballvalve, NPT ØOD (in) NPT (in)F66682522 7/8 1/2F66684022 1 1/2 1/2F66685022 2 1/2F66686322 2 1/2 1/2F66686328 2 1/2 3/4

Lateral tee ØOD (in)FRX05L100 3FRX05L300 4

* Vented

* Rubber insulated

* ANSI

Male NPT C (in) Style Body (in)FCP05U1N02 1/4 ISO B 1/4FCP05U1N03 3/8 ISO B 1/4FCP05U1N04 1/2 ISO B 1/4FCP05U2N02 1/4 ISO B 3/8FCP05U2N03 3/8 ISO B 3/8FCP05U2N04 1/2 ISO B 3/8FCP05A1N02 1/4 ARO 1/4FCP05A1N03 3/8 ARO 1/4FCP05A1N04 1/2 ARO 1/4

MalePlug NPT C (in) Style Body (in)F90842314 1/4 ISO B 1/4F90842318 3/8 ISO B 1/4F90843014 1/4 ISO B 3/8F90843018 3/8 ISO B 3/8F90842214 1/4 ARO 1/4F90842218 3/8 ARO 1/4

FemalePlug NPT C (in) Style Body (in)F90832314 1/4 ISO B 1/4F90832318 3/8 ISO B 1/4F90833014 1/4 ISO B 3/8F90833018 3/8 ISO B 3/8F90832214 1/4 ARO 1/4

FemaleNPT C (in) Style Body (in)FCP15U1N02 1/4 ISO B 1/4FCP15U1N03 3/8 ISO B 1/4FCP15U1N04 1/2 ISO B 1/4FCP15U2N02 1/4 ISO B 3/8FCP15U2N03 3/8 ISO B 3/8FCP15U2N04 1/2 ISO B 3/8FCP15A1N02 1/4 ARO 1/4FCP15A1N03 3/8 ARO 1/4FCP15A1N04 1/2 ARO 1/4

Coupler withhosetail ØOD (mm) Style Body (in)FCP21U108 8 ISO B 1/4FCP21U110 10 ISO B 1/4FCP21U113 13 ISO B 1/4FCP21U208 8 ISO B 3/8FCP21U210 10 ISO B 3/8FCP21U213 13 ISO B 3/8FCP21A108 8 ARO 1/4FCP21A110 10 ARO 1/4FCP21A113 13 ARO 1/4

Plug withhosetail ID (mm) Style Body (in)F90852314 1/4 ISO B 1/4F90852308 5/16 ISO B 1/4F90853060 3/8 ISO B 1/4F90853008 5/16 ISO B 3/8F90853060 3/8 ISO B 3/8F90853062 1/2 ISO B 3/8

Composite automatic safety couplers

CURTIS-TOLEDO®, INC.1905 KIENLEN AVENUE | ST. LOUIS, MO 63133

314-383-1300

WWW.FSCURTIS.COM | INFO@ FSCURTIS.COM

FS-Curtis Aluminum Piping System:FORM NO. FSCP 0000R1Improvements and research are continuousat FS Curtis. Specifications may changewithout notice.

ISO 9001 : 2008 ISO 14001 : 2004

© 2016 CURTIS TOLEDO, INC.

Installation Instructions

1. Before installing the FS-Curtis Aluminum Piping System, a responsible person should check that the area of installation conforms to regulations designed to prevent the risk of explosion (in particular the risks associated with static electricity in silo zones). FS-Curtis Aluminum Piping System’s flexible hose should be fitted at the beginning of the pipe system, in order to counter the vibrations found in any compressed air system. When maintaining or modifying a pipe system, the work must be undertaken only after the compressed air system has been vented. The installer must use only FS-Curtis Aluminum Piping System components and accessories, and in particular, FS-Curtis Aluminum Piping System’s pipe clips. No other type of pipe mounting method is to be used. The technical characteristics of FS-Curtis Aluminum Piping System’s components, as expressed in this brochure, must be respected.

2. Once assembled, the operation of a FS-Curtis Aluminum Piping System installation is the responsibility of the installer who, prior to use, must complete all necessary tests. The installer must also ensure that the installation has been properly carried out in line with the instructions and that it meets all legal requirements.

3. Care should be taken to protect pipe against mechanical shocks – especially when close to the passage of forklift trucks or where suspended objects are being moved. All excessive rotational movements, which could lead to disconnection, whether on the pipes or the supports, must be avoided. FS-Curtis Aluminum Piping System’s flexible hose must be used in accordance with the instructions in this brochure.

4. The performance of a FS-Curtis Aluminum Piping System system is maintained when the effects of expansion or contraction are properly taken into account.

5. To ensure proper installation, the FS-Curtis Aluminum Piping System’s components are supplied with an assembly guide. The installer must follow with care the precise instructions as described in this guide as well as this brochure.

6. When suspending from a ceiling, the FS-Curtis Aluminum Piping System’s pipe clips should be fixed to a support (U channel, cable tray, threaded rod, etc.). This type of support ensures that the clips stay in alignment, which allows the pipe to expand and contract.

7. When using the FS-Curtis Aluminum Piping System, the following situations must be avoided:

• Installation within a solid mass (concrete, injected foam)• The hanging of any external equipment

to FS-Curtis Aluminum pipe• The use of FS-Curtis Aluminum Piping

System as an electric grounding, or to support electrical equipment• Exposure to chemicals that are incompatible with FS-Curtis components.