FRONT, REAR AND SIDE ADVANCED WIND BAFFLE WB-PA/WB … · FRONT, REAR AND SIDE ADVANCED WIND BAFFLE...
Transcript of FRONT, REAR AND SIDE ADVANCED WIND BAFFLE WB-PA/WB … · FRONT, REAR AND SIDE ADVANCED WIND BAFFLE...
Specifications are subject to change without notice. © 2019 Mitsubishi Electric Trane HVAC US LLC
Job Name:System Reference: Date:
FRONT, REAR AND SIDE ADVANCED WINDBAFFLE WB-PA/WB-SD/WB-RE
APPLICATION• The Wind Baffles are used to extend the cooling temperature operation range of the
PUY, PUZ, MXZ and PUMY models• The information below outlines which wind baffles to utilize per required operation range• Please refer to the installation manual of the appropriate outdoor unit for correct
installation requirements
COOLING TEMPERATURE OPERATION RANGE WITH WIND BAFFLESModel Series
Operation Range Without Wind Baffles Front Wind Baffles Front + Advanced Side +
Advanced Rear Wind BafflesPUZ-7 23° F - 115° F 0° F N/APUY-7 23° F - 115° F 0° F -40° FPUMY* 23° F - 115° F 5° F N/A
MXZ 23° F - 115° F 5° F N/A*Operation range varies based on indoor unit connected, refer to service manual for applicable indoor units**If unit is exposed without wall surfaces surrounding for protection from wind, then side and rear wind baffles will be required. Please refer to installation dimensions and outdoor unit installation manual for appropriate requirements.
ModelsType and Quantity
Front Wind Baffles Advanced Side Wind Baffles Advanced Rear Wind BafflesWB-PA3 WB-PA4 WB-PA5 WB-SD4 WB-SD5 WB-SD6 WB-RE4 WB-RE5 WB-RE6
PUY-A12NKA7 1 1 1PUY-A18NKA7 1 1 1PUY-A24NHA7 1 1 1PUY-A30NHA7 1 1 1PUY-A36NKA7 2 1 1PUY-A42NKA7 2 1 1PUZ-A12NKA7 1PUZ-A18NKA7 1PUZ-A24NHA7 1PUZ-A30NHA7 1PUZ-A36NKA7 2PUZ-A42NKA7 2MXZ-8C48NA 2MXZ-8C60NA 2
MXZ-4C36NAHZ 2MXZ-5C42NAHZ 2MXZ-8C48NAHZ 2
PUMY-P36NKMU2 2PUMY-P48NKMU2 2PUMY-P60NKMU2 2PUMY-HP36NKMU 2PUMY-HP48NKMU 2
Specifications are subject to change without notice. © 2019 Mitsubishi Electric Trane HVAC US LLC
FRONT, REAR AND SIDE ADVANCED WIND BAFFLE WB-PA/WB-SD/WB-RE
FRONT WIND BAFFLE WB-PA3 / WB-PA4 / WB-PA5GENERAL FEATURES• Front Wind Baffles allow outdoor units to operate at full capacity down to the temperature ranges shown in the table above.• Prevents wind from reversing outdoor fan rotation when unenergized . • Durable and low maintenance construction.
PLEASE NOTE• Install outdoor units with the back surface facing wall side to eliminate the effects of external wind• Outdoor units should not be installed in an orientation or site where the wind blows directly at the back of the unit• Wind baffle should not be used where there is any obstacle at either side or above the outdoor unit as the discharged air will be blocked• Refer to outdoor unit for detailed installation instructions
WB-PA4 / WB-PA5WB-PA3
Specifications are subject to change without notice. © 2019 Mitsubishi Electric Trane HVAC US LLC
FRONT, REAR AND SIDE ADVANCED WIND BAFFLE WB-PA/WB-SD/WB-RE
WIND BAFFLE SPECIFICATIONS
ModelsExterior
WeightColor Surface Treatment Material
WB-PA3
Matches P-Series Outdoor Unit
(Ivory Munsell 3Y 7.8/1.1)
Polyester Powder Coating
Alloy Hot-Dip Zinc Coated
Carbon Steel Sheet
8 Lbs. 8 Oz.WB-PA4 7 Lbs. 7.9 Oz.WB-PA5 8 Lbs. 8 Oz.WB-SD4 6 Lbs.WB-SD5 10 Lbs.WB-SD6 15 Lbs.WB-RE4 11 Lbs.WB-RE5 18 Lbs.WB-RE6 35 Lbs.
ADVANCED WIND BAFFLE WB-SD / WB-REGENERAL FEATURES• Advanced Side and Rear Wind Baffles allow outdoor units to operate at full capacity down to the
temperature ranges shown in the table above• Prevents wind from reversing outdoor fan rotation when unenergized• Durable and low maintenance construction
PLEASE NOTE• Installation location will dictate Advanced wind baffle requirements• Refer to the installation manual for additional details• Advanced Wind Baffles should be installed to prevent any wind blowing directly into the unit• Front Wind Baffle (WB-PA3, WB-PA4, WB-PA5) is also required for -40˚ F operation of PUY models
WB-SD4
WB-RE4
WB-SD5
WB-RE5
WB-SD6
WB-RE6
Specifications are subject to change without notice. © 2019 Mitsubishi Electric Trane HVAC US LLC
FRONT, REAR AND SIDE ADVANCED WIND BAFFLE WB-PA/WB-SD/WB-RE
DIMENSIONSWB-PA3
Specifications are subject to change without notice. © 2018 Mitsubishi Electric Trane HVAC US LLC
DIMENSIONS: WB-PA3
.254 PlCS
23 21
8
8 .5
1
.5
25.6
22.4
25
DCBAA B C D
12
34
56
78 8
76
54
32
1
AD
ESCRIPTIO
NREVISION
S
DIM
ENSIO
NS A
RE IN IN
CHES
TOLERA
NC
ES:FRA
CTIO
NA
L 1/16
AN
GULA
R: BEND
2 D
EGREES
TWO
PLAC
E DEC
IMA
L 0.06
THREE PLAC
E DEC
IMA
L 0.03
INTERPRET G
EOM
ETRICTO
LERAN
CIN
G PER:A
SME Y14.5
MA
TERIAL
FINISH
20 GA
GA
LV G
90
POW
DER C
OA
T PAIN
T
DRA
WN
CHEC
KED
ENG
APPR.
MFG
APPR.
Q.A
.
DA
TEN
AM
E
TITLE:
SIZE
BD
WG
. NO
.REV
WEIG
HT: SC
ALE: 1:8
UNLESS O
THERWISE SPEC
IFIED:
-
CF
OC
T-23-12
SHEET 1 OF 1
WB-PA
3-submittal
DO
NO
T SCA
LE DRA
WIN
G
MITSU
BISHI ELECTRIC
WIN
D BA
FFLE - WB-PA
3M
R. SLIM P-SERIES
PUMY-60
SUBMITTA
L
WB-PA
3REV.
DESC
RIPTION
BD
ESCRIPTIO
N
CD
ESCRIPTIO
N
DD
ESCRIPTIO
N
ED
ESCRIPTIO
N
FD
ESCRIPTIO
N
GD
ESCRIPTIO
N
PROPRIETARY AN
D CO
NFID
ENTIAL
THE INFO
RMA
TION
CO
NTA
INED
IN THIS
DRA
WIN
G IS THE SO
LE PROPERTY O
FM
ITSUBISHI ELECTRIC
CO
RPORA
TION
. AN
Y REPRO
DUC
TION
IN PA
RT OR A
S A W
HOLE
WITHO
UT THE WRITTEN
PERMISSIO
N O
FM
ITSUBISHI ELECTRIC
CO
RPORA
TION
IS PRO
HIBITED.
1 1
.254 PlCS
23 21
8
8 .5
1
.5
25.6
22.4
25
DCBAA B C D
12
34
56
78 8
76
54
32
1
AD
ESCRIPTIO
NREVISION
S
DIM
ENSIO
NS A
RE IN IN
CHES
TOLERA
NC
ES:FRA
CTIO
NA
L 1/16
AN
GULA
R: BEND
2 D
EGREES
TWO
PLAC
E DEC
IMA
L 0.06
THREE PLAC
E DEC
IMA
L 0.03
INTERPRET G
EOM
ETRICTO
LERAN
CIN
G PER:A
SME Y14.5
MA
TERIAL
FINISH
20 GA
GA
LV G
90
POW
DER C
OA
T PAIN
T
DRA
WN
CHEC
KED
ENG
APPR.
MFG
APPR.
Q.A
.
DA
TEN
AM
E
TITLE:
SIZE
BD
WG
. NO
.REV
WEIG
HT: SC
ALE: 1:8
UNLESS O
THERWISE SPEC
IFIED:
-
CF
OC
T-23-12
SHEET 1 OF 1
WB-PA
3-submittal
DO
NO
T SCA
LE DRA
WIN
G
MITSU
BISHI ELECTRIC
WIN
D BA
FFLE - WB-PA
3M
R. SLIM P-SERIES
PUMY-60
SUBMITTA
L
WB-PA
3REV.
DESC
RIPTION
BD
ESCRIPTIO
N
CD
ESCRIPTIO
N
DD
ESCRIPTIO
N
ED
ESCRIPTIO
N
FD
ESCRIPTIO
N
GD
ESCRIPTIO
N
PROPRIETARY AN
D CO
NFID
ENTIAL
THE INFO
RMA
TION
CO
NTA
INED
IN THIS
DRA
WIN
G IS THE SO
LE PROPERTY O
FM
ITSUBISHI ELECTRIC
CO
RPORA
TION
. AN
Y REPRO
DUC
TION
IN PA
RT OR A
S A W
HOLE
WITHO
UT THE WRITTEN
PERMISSIO
N O
FM
ITSUBISHI ELECTRIC
CO
RPORA
TION
IS PRO
HIBITED.
1 1
3400 Lawrenceville Suwanee RdSuwanee, GA 30024Tele: 678-376-2900 • Fax: 800-889-9904Toll Free: 800-433-4822 (#3)www.mehvac.comSpecifications are subject to change without notice.
© 2012 M
ITSU
BIS
HI E
LEC
TRIC
& E
LEC
TRO
NIC
S, IN
C.
FOR
M# W
B-PA
1/WB
-PA2- 201201
DIMENSIONS: WB-PA2
3400 Lawrenceville Suwanee RdSuwanee, GA 30024Tele: 678-376-2900 • Fax: 800-889-9904Toll Free: 800-433-4822 (#3)www.mehvac.comSpecifications are subject to change without notice.
© 2012 M
ITSU
BIS
HI E
LEC
TRIC
& E
LEC
TRO
NIC
S, IN
C.
FOR
M# W
B-PA
1/WB
-PA2- 201201
DIMENSIONS: WB-PA2
.254 PlCS
23
21
8
8 .5
1
.5
25.6
22.4
25
D
C
B
AA
B
C
D
12345678
8 7 6 5 4 3 2 1
ADESCRIPTION
REVISIONS
DIMENSIONS ARE IN INCHESTOLERANCES:FRACTIONAL 1/16ANGULAR: BEND 2 DEGREESTWO PLACE DECIMAL 0.06THREE PLACE DECIMAL 0.03
INTERPRET GEOMETRICTOLERANCING PER:ASME Y14.5
MATERIAL
FINISH
20 GA GALV G90
POWDER COAT PAINT
DRAWN
CHECKED
ENG APPR.
MFG APPR.
Q.A.
DATENAME
TITLE:
SIZE
BDWG. NO. REV
WEIGHT: SCALE: 1:8
UNLESS OTHERWISE SPECIFIED:
-
CF OCT-23-12
SHEET 1 OF 1WB-PA3-submittal DO NOT SCALE DRAWING
MITSUBISHI ELECTRICWIND BAFFLE - WB-PA3MR. SLIM P-SERIESPUMY-60SUBMITTAL
WB-PA3REV. DESCRIPTION
BDESCRIPTION
CDESCRIPTION
DDESCRIPTION
EDESCRIPTION
FDESCRIPTION
GDESCRIPTION
PROPRIETARY AND CONFIDENTIALTHE INFORMATION CONTAINED IN THISDRAWING IS THE SOLE PROPERTY OFMITSUBISHI ELECTRIC CORPORATION. ANY REPRODUCTION IN PART OR AS A WHOLEWITHOUT THE WRITTEN PERMISSION OFMITSUBISHI ELECTRIC CORPORATION IS PROHIBITED.
1
1
Specifications are subject to change without notice. © 2019 Mitsubishi Electric Trane HVAC US LLC
DIMENSIONSWB-PA4
FRONT, REAR AND SIDE ADVANCED WIND BAFFLE WB-PA/WB-SD/WB-RE
Specifications are subject to change without notice. © 2018 Mitsubishi Electric Trane HVAC US LLC
DIMENSIONS: WB-PA4
Specifications are subject to change w
ithout notice. ©
2017 Mitsubishi E
lectric US
, Inc.
DIMENSIONS: WB-PA4
© 2012 M
ITSU
BIS
HI E
LEC
TRIC
& E
LEC
TRO
NIC
S, IN
C.
DIMENSIONS: WB-PA1
22-3/8
21-1/8
Specifications are subject to change w
ithout notice. ©
2017 Mitsubishi E
lectric US
, Inc.
DIMENSIONS: WB-PA4
© 2012 M
ITSU
BIS
HI E
LEC
TRIC
& E
LEC
TRO
NIC
S, IN
C.
DIMENSIONS: WB-PA1
22-3/8
21-1/8
Specifications are subject to change without notice. © 2018 Mitsubishi Electric Trane HVAC US LLC
DIMENSIONS: WB-PA4
Specifications are subject to change w
ithout notice. ©
2017 Mitsubishi E
lectric US
, Inc.
DIMENSIONS: WB-PA4
© 2012 M
ITSU
BIS
HI E
LEC
TRIC
& E
LEC
TRO
NIC
S, IN
C.
DIMENSIONS: WB-PA1
22-3/8
21-1/8
Specifications are subject to change w
ithout notice. ©
2017 Mitsubishi E
lectric US
, Inc.
DIMENSIONS: WB-PA4
© 2012 M
ITSU
BIS
HI E
LEC
TRIC
& E
LEC
TRO
NIC
S, IN
C.
DIMENSIONS: WB-PA1
22-3/8
21-1/8
Specifications are subject to change without notice. © 2019 Mitsubishi Electric Trane HVAC US LLC
DIMENSIONSWB-PA5
FRONT, REAR AND SIDE ADVANCED WIND BAFFLE WB-PA/WB-SD/WB-RE
1340 Satellite Boulevard. Suwanee, GA 30024Toll Free: 800-433-4822 www.mehvac.com
Manufactured for MITSUBISHI ELECTRIC TRANE HVAC US LLC
Specifications are subject to change without notice. © 2018 Mitsubishi Electric Trane HVAC US LLC
DIMENSIONS: WB-PA5
FORM# WIND BAFFLE - 201806
1340 Satellite Boulevard. Suwanee, GA 30024Toll Free: 800-433-4822 www.mehvac.com
Manufactured for M
ITSUBISHI ELECTRIC US, INC.
Specifications are subject to change w
ithout notice. ©
2017 Mitsubishi E
lectric US
, Inc.FO
RM
# WIN
D B
AFFLE
- 201702 Ver2
DIMENSIONS: WB-PA5
3400 Lawrenceville Suwanee RdSuwanee, GA 30024Tele: 678-376-2900 • Fax: 800-889-9904Toll Free: 800-433-4822 (#3)www.mehvac.com
© 2012 M
ITSU
BIS
HI E
LEC
TRIC
& E
LEC
TRO
NIC
S, IN
C.
FOR
M#
WB
-PA1/W
B-PA
2-201201
DIMENSIONS: WB-PA2
23-3/8
1340 Satellite Boulevard. Suwanee, GA 30024Toll Free: 800-433-4822 www.mehvac.com
Manufactured for M
ITSUBISHI ELECTRIC US, INC.
Specifications are subject to change w
ithout notice. ©
2017 Mitsubishi E
lectric US
, Inc.FO
RM
# WIN
D B
AFFLE
- 201702 Ver2
DIMENSIONS: WB-PA5
3400 Lawrenceville Suwanee RdSuwanee, GA 30024Tele: 678-376-2900 • Fax: 800-889-9904Toll Free: 800-433-4822 (#3)www.mehvac.com
© 2012 M
ITSU
BIS
HI E
LEC
TRIC
& E
LEC
TRO
NIC
S, IN
C.
FOR
M#
WB
-PA1/W
B-PA
2-201201
DIMENSIONS: WB-PA2
23-3/8
1340 Satellite Boulevard. Suwanee, GA 30024Toll Free: 800-433-4822 www.mehvac.com
Manufactured for MITSUBISHI ELECTRIC TRANE HVAC US LLC
Specifications are subject to change without notice. © 2018 Mitsubishi Electric Trane HVAC US LLC
DIMENSIONS: WB-PA5
FORM# WIND BAFFLE - 201806
1340 Satellite Boulevard. Suwanee, GA 30024Toll Free: 800-433-4822 www.mehvac.com
Manufactured for M
ITSUBISHI ELECTRIC US, INC.
Specifications are subject to change w
ithout notice. ©
2017 Mitsubishi E
lectric US
, Inc.FO
RM
# WIN
D B
AFFLE
- 201702 Ver2
DIMENSIONS: WB-PA5
3400 Lawrenceville Suwanee RdSuwanee, GA 30024Tele: 678-376-2900 • Fax: 800-889-9904Toll Free: 800-433-4822 (#3)www.mehvac.com
© 2012 M
ITSU
BIS
HI E
LEC
TRIC
& E
LEC
TRO
NIC
S, IN
C.
FOR
M#
WB
-PA1/W
B-PA
2-201201
DIMENSIONS: WB-PA2
23-3/8
1340 Satellite Boulevard. Suwanee, GA 30024Toll Free: 800-433-4822 www.mehvac.com
Manufactured for M
ITSUBISHI ELECTRIC US, INC.
Specifications are subject to change w
ithout notice. ©
2017 Mitsubishi E
lectric US
, Inc.FO
RM
# WIN
D B
AFFLE
- 201702 Ver2
DIMENSIONS: WB-PA5
3400 Lawrenceville Suwanee RdSuwanee, GA 30024Tele: 678-376-2900 • Fax: 800-889-9904Toll Free: 800-433-4822 (#3)www.mehvac.com
© 2012 M
ITSU
BIS
HI E
LEC
TRIC
& E
LEC
TRO
NIC
S, IN
C.
FOR
M#
WB
-PA1/W
B-PA
2-201201
DIMENSIONS: WB-PA2
23-3/8
23"
23-3/8"
7-7/
8"
23"
23-3/8"
7-7/
8"
Specifications are subject to change without notice. © 2019 Mitsubishi Electric Trane HVAC US LLC
DIMENSIONSWB-SD4
WB-RE4
FRONT, REAR AND SIDE ADVANCED WIND BAFFLE WB-PA/WB-SD/WB-RE
Specifications are subject to change without notice. © 2015 Mitsubishi Electric US, Inc.
DIMENSIONS: WB-SD1 and WB-RE1WB-SD1
Unit: inch
Specifications:
• Material:18 Ga. Satin Coat Steel-Painted • Description: Side Windscreen • To be used in operation below -5°C • Dimension Units: inches • Scale: NTS • Weight:4lbs.
Notes:
Job Name: Location: Purchaser: Unit Designation: Schedule No. Engineer: Model No. PE-SD-12-18 Submitted To: Submitted By: For: Reference Approval Construction
7-7/8" 7-7/8"
20-3
/8"
20-3
/8"
8-31/32"
WB-RE1Unit: inch
Specifications:
• Material:18 Ga. Satin Coat Steel-Painted • Description: Rear Windscreen • To be used in operation below -5°C • Dimension Units: inches • Scale: NTS • Weight:9lbs.
Notes:
Job Name: Location:Purchaser: Unit Designation: Schedule No. Engineer: Model No. PE-RE-12-18 Submitted To: Submitted By: For: Reference Approval Construction
7-7/
8"
7-7/8"7-7/8"
24-15/32"
24-15/32"
20-6
/4"
Specifications are subject to change without notice. © 2015 Mitsubishi Electric US, Inc.
DIMENSIONS: WB-SD1 and WB-RE1WB-SD1
Unit: inch
Specifications:
• Material:18 Ga. Satin Coat Steel-Painted • Description: Side Windscreen • To be used in operation below -5°C • Dimension Units: inches • Scale: NTS • Weight:4lbs.
Notes:
Job Name: Location: Purchaser: Unit Designation: Schedule No. Engineer: Model No. PE-SD-12-18 Submitted To: Submitted By: For: Reference Approval Construction
7-7/8" 7-7/8"
20-3
/8"
20-3
/8"
8-31/32"
WB-RE1Unit: inch
Specifications:
• Material:18 Ga. Satin Coat Steel-Painted • Description: Rear Windscreen • To be used in operation below -5°C • Dimension Units: inches • Scale: NTS • Weight:9lbs.
Notes:
Job Name: Location:Purchaser: Unit Designation: Schedule No. Engineer: Model No. PE-RE-12-18 Submitted To: Submitted By: For: Reference Approval Construction
7-7/
8"
7-7/8"7-7/8"
24-15/32"
24-15/32"
20-6
/4"
Specifications are subject to change without notice. © 2019 Mitsubishi Electric Trane HVAC US LLC
DIMENSIONSWB-SD5
WB-RE5
FRONT, REAR AND SIDE ADVANCED WIND BAFFLE WB-PA/WB-SD/WB-RE
Specifications are subject to change without notice. © 2015 Mitsubishi Electric US, Inc.
WB-SD2Unit: inch
WB-RE2Unit: inchSpecifications:
• Material:18 Ga. Satin Coat Steel-Painted • Description: Side Windscreen • To be used in operation below -5°C • Dimension Units: inches • Scale: NTS • Weight:7lbs
Notes:
Job Name: Location: Purchaser: Unit Designation: Schedule No. Engineer: Model No. PE-SD-24-36 Submitted To: Submitted By: For: Reference Approval Construction
6-31/32"
6-31/32"8" 8"
35-5
/8"
Material:18 Ga. Satin Coat Steel-Painted Scale: NTS Weight:19lbs. Description: Rear Windscreen To be used in operation below -5°C Dimension Units: inches Notes:
Job Name: Location: Purchaser: Unit Designation: Schedule No. Engineer: Model No. PE-RE-24-36 Submitted To: Submitted By: For: Reference Approval Construction
8"
8"
35-3
/8"
27"
35-3
/8"
8"
DIMENSIONS: WB-SD2 and WB-RE2
Specifications are subject to change without notice. © 2015 Mitsubishi Electric US, Inc.
WB-SD2Unit: inch
WB-RE2Unit: inchSpecifications:
• Material:18 Ga. Satin Coat Steel-Painted • Description: Side Windscreen • To be used in operation below -5°C • Dimension Units: inches • Scale: NTS • Weight:7lbs
Notes:
Job Name: Location: Purchaser: Unit Designation: Schedule No. Engineer: Model No. PE-SD-24-36 Submitted To: Submitted By: For: Reference Approval Construction
6-31/32"
6-31/32"8" 8"
35-5
/8"
Material:18 Ga. Satin Coat Steel-Painted Scale: NTS Weight:19lbs. Description: Rear Windscreen To be used in operation below -5°C Dimension Units: inches Notes:
Job Name: Location: Purchaser: Unit Designation: Schedule No. Engineer: Model No. PE-RE-24-36 Submitted To: Submitted By: For: Reference Approval Construction
8"
8"
35-3
/8"
27"
35-3
/8"
8"
DIMENSIONS: WB-SD2 and WB-RE2
Specifications are subject to change without notice. © 2019 Mitsubishi Electric Trane HVAC US LLC
DIMENSIONSWB-SD6
WB-RE6
FRONT, REAR AND SIDE ADVANCED WIND BAFFLE WB-PA/WB-SD/WB-RE
Specifications are subject to change without notice. © 2015 Mitsubishi Electric US, Inc.
1340 Satellite Boulevard. Suwanee, GA 30024Toll Free: 800-433-4822 www.mehvac.com
Manufactured for MITSUBISHI ELECTRIC US, INC.
WB-SD3
PCC-09-05-2008B
Specifications:
• Material:18 Ga. Satin Coat Steel-Painted • Description: Side Windscreen • To be used in cooling operation below -5°C • Dimension Units: inches • Scale: NTS • Weight:26lbs
Notes:
Job Name: Location:Purchaser: Unit Designation: Schedule No. Engineer: Model No. PE-RE-42 Submitted To: Submitted By: For: Reference Approval Construction
27.1"
0.75"
8.0"
0.75
"8.0"
51.5
"
Unit: inch
PCC-09-05-2008A
Specifications:
• Material:18 Ga. Satin Coat Steel-Painted • Description: Side Windscreen • To be used in cooling operation below -5°C • Dimension Units: inches • Scale: NTS • Weight:7lbs
Notes:
Job Name: Location:Purchaser: Unit Designation: Schedule No. Engineer: Model No. PE-SD-42 Submitted To: Submitted By: For: Reference Approval Construction
0.75"0.75"
6.9"
8.0"
51.5
"
6-31/32"
3/4"3/4"
8"
51-1
/2"
3/4"
3/4"
8"
8"
51-1
/2"
27-1/8"
DIMENSIONS: WB-SD3 and WB-RE3
FORM# ADVANCED WIND BAFFLE WB-SD/WB-RE - 201511Ver2
WB-RE3Unit: inch
Specifications are subject to change without notice. © 2015 Mitsubishi Electric US, Inc.
1340 Satellite Boulevard. Suwanee, GA 30024Toll Free: 800-433-4822 www.mehvac.com
Manufactured for MITSUBISHI ELECTRIC US, INC.
WB-SD3
PCC-09-05-2008B
Specifications:
• Material:18 Ga. Satin Coat Steel-Painted • Description: Side Windscreen • To be used in cooling operation below -5°C • Dimension Units: inches • Scale: NTS • Weight:26lbs
Notes:
Job Name: Location:Purchaser: Unit Designation: Schedule No. Engineer: Model No. PE-RE-42 Submitted To: Submitted By: For: Reference Approval Construction
27.1"
0.75"
8.0"
0.75
"8.0"
51.5
"
Unit: inch
PCC-09-05-2008A
Specifications:
• Material:18 Ga. Satin Coat Steel-Painted • Description: Side Windscreen • To be used in cooling operation below -5°C • Dimension Units: inches • Scale: NTS • Weight:7lbs
Notes:
Job Name: Location:Purchaser: Unit Designation: Schedule No. Engineer: Model No. PE-SD-42 Submitted To: Submitted By: For: Reference Approval Construction
0.75"0.75"
6.9"
8.0"
51.5
"
6-31/32"
3/4"3/4"
8"
51-1
/2"
3/4"
3/4"
8"
8"
51-1
/2"
27-1/8"
DIMENSIONS: WB-SD3 and WB-RE3
FORM# ADVANCED WIND BAFFLE WB-SD/WB-RE - 201511Ver2
WB-RE3Unit: inch
1340 Satellite Boulevard. Suwanee, GA 30024Toll Free: 800-433-4822 www.mehvac.com
Specifications are subject to change without notice. © 2019 Mitsubishi Electric Trane HVAC US LLC
FRONT, REAR AND SIDE ADVANCED WIND BAFFLE WB-PA/WB-SD/WB-RE
APPENDIX - PREVIOUS GENERATION COMPATIBILITY
Models
Front Wind Baffles Advanced Side Wind Baffles Advanced Rear Wind Baffles
WB-PA1
WB-PA2(1)
WB-PA3
WB-PA5
WB-SD1
WB-SD2(2)
WB-SD3
WB-RE1
WB-RE2(3)
WB-RE3
PUY/Z-A-A12NHA4 1PUY/Z-A-A18NHA4 1PUY/Z-A-A24NHA4 1PUY/Z-A-A30NHA4 1PUY/Z-A-A36NHA4 1PUY/Z-A-A42NHA4 2PUY/Z-A-A42NHA5 2
PUZ-HA30NHA4 2PUZ-HA36NHA4 2PUZ-HA30NHA5 2PUZ-HA36NHA5 2PUZ-HA42NKA 2
PUMY-P36NHMU 2PUMY-P36NKMU1 2PUMY-P48NHMU 2PUMY-P48NKMU1 2PUMY-P60NKMU/1 2PUY/Z-A12NHA6 1 1 1PUY/Z-A18NHA6 1 1 1PUY/Z-A24NHA6 1 1 1PUY/Z-A30NHA6 1 1 1PUY/Z-A36NHA6 1 1 1PUY/Z-A42NHA6 2 1 1
COOLING TEMPERATURE OPERATION RANGE WITH WIND BAFFLESModel Series
Operation Range Without Wind Baffles
Front Wind Baffles Only
Front + Advanced Side + Advanced Rear Wind Baffles
PUZ-4 23°F - 115°F 0°F N/APUY-4 23°F - 115°F 0°F N/APUZ-5 23°F - 115°F 0°F N/APUY-5 23°F - 115°F 0°F N/APUZ-6 23°F - 115°F 0°F N/APUY-6* 23°F - 115°F 0°F -20°F
*PUY-A42NHA6 units do not have the extended cooling range below 0° F
(1) WB-PA2 is replaced by WB-PA5(2) WB-SD2 is replaced by WB-SD5(3) WB-RE2 is replaced by WB-RE5