Freebie Christmas Pattern · Sew the sashing units from step 4 between and on the ends of the...
Transcript of Freebie Christmas Pattern · Sew the sashing units from step 4 between and on the ends of the...
1
Fabric Requirements
Red- ½ yard
Green- 1/3 yard
Cream- ¼ yard
Cutting
Red 1 strip 1 ½ x WOF
from this strip cut 16-1 ½ inch squares (A)
8-1 ½ x 3 5/8 inch rectangles (B)
4 strips 1 ½ x WOF for sashing
3 strips 2 ½ x WOF for binding
Green 1 strip 1 ½ x WOF
From this strip cut 8-1 ½ inch squares ( C)
4-1 ½ x 3 5/8 inch rectangles (D)
5 strips 1 ½ x WOF for sashing
Cream 1 strip 1 ½ x WOF
From this strip cut 15- 1 ½ inch squares (E)
1 strip 2 ¾ x WOF
from this strip cut 6- 1 5/8 inch squares cut once on the diagonal
for a total of 12 triangles (F)
9- 2 ¾ inch squares cut twice on the diagonal
for a total of 36 triangles (G)
Piecing the Blocks
(all seams are a scant ¼ inch)
1. Using the 1 ½ inch red (A) and cream squares (E) make 2 red/cream 9 patches.
2
2. Using the 1 ½ inch green (C ) and cream squares (E) make 1 green/cream 9 patch.
3. Sew a cream (G) triangle to a Red (B) rectangle. Press toward (B.) Make 4
4. Flip over the units from step 3 and sew another cream (G) triangle to the other side.
Press toward (B.) Trim off ears. Make 4
3
5. Sew a cream (G) triangle to a Red (A) square. Press toward (A.) Make 8
6. Flip over units from step 5 and sew another cream (G) triangle to the other side. Press
toward (A). Trim ears. Make 8
7. Sew a cream (F) triangle to the top of the units from step 6. Press toward (F.) Trim
ears. Make 8
8. Sew units from step 7 to 4 red (B) rectangles and the four units from step 4.
4
9.Sew a unit 1 from step 8 to both sides of the red/cream nine patch.
10. Sew a unit 2 from step 8 to the other sides of step 9. Make 2.
You should now have 2 Red/Cream blocks finishing at 6 ½ inches.
Repeat these steps to make one Green/Cream 6 ½ inch block.
(If your block turns out to be a little smaller because your ¼ inch seam was a little bigger
it’s no big deal you can make sashing to fit!)
5
Piecing the Sashing
1. Using the 1 ½ inch green and red sashing strips sew
2 – Green/Red/Green sashing units
1- Red/ Green/Red unit.
2. From the Red/Green/Red sashing strips cut 16- 1 ½ inch units. From the
Green/Red/Green sashing strips cut 8- 1 ½ inch units.
3. Using the pieces from step 2 make 8 Red/Green 9 patches.
4. From the remaining Green/Red/Green sashing units cut 10- 6 ½ inch units. (This is
where you will measure your block, if it didn’t turn out to be exactly 6 ½ inches, you will
cut your sashing strips in this step whatever size your block is. Ex. If your block is 6 ¼
inches cut your 10 Green/Red/Green sashing units 6 ¼ inches.)
6
5. Sew the sashing units from step 4 between and on the ends of the blocks to join.
6. Sew 4 Red and Green 9 patches to 3 sashing units from step 4. Make 2 and sew to the
top and bottom of the table runner.
Layer, bind, quilt, and ENJOY!
Wishing the Merriest of Christmases to
You and everyone you love.
God Bless,
Melissa
Cornbread and Beans Quilting Co.
http://cornbreadandbeansquilting.wordpress.com/