Framework for ISO/TC 130 standards › files › live › sites › tc130 › files ›...

ISO/TC130Graphictechnology

Framework for ISO/TC130standards

V1.0 2019

ISO/TC130

Framework for ISO/TC130 standards v1.0 2019 – page 2

Contents

1 Introduction......................................................................................................................................................3

2 Theprintworkflow.........................................................................................................................................4

3 CategorizationofISO/TC130standards..................................................................................................6

4 FrameworkforISO/TC130standards...................................................................................................16

5 WorkinggroupsforISO/TC130standardsdevelopment................................................................18

ISO/TC130


1 Introduction

ISO/TC130developsandpublishesstandardsthatarewidelyusedthroughouttheworld.Asthebodyofpublished standards from ISO/TC 130 continues to grow, there is a need to have these standardssummarized, categorized and introduced as a whole. Based on analysis of current standards andanticipationoffuturestandards,aframeworkinvolvingthecategorizationofISO/TC130standardswithsupportive informationhasbeendevelopedandpublishedas thisdocument,whichmaybeusedasareferencefortheISO/TC130workprogramme,andfacilitatestandardsapplicationanddevelopment.

Forbetterunderstandingof ISO/TC130 standards and thedevelopmentmechanism, the frameworkgiveninthisdocumentisestablishedinconsiderationofthefollowingelements:

a) Functionalareasofspecificstandardsandstakeholders

Fromaprintworkflowviewpoint,manystakeholdersareinvolvedinvariousprocesses,whichfallintodifferentfunctionalareas.ISO/TC130standardsareapplicabletoindividualprocesseswithstakeholdersas intended users. The relevance of specific standards is closely connected to the stakeholders’responsibilitiesandneedsineachprocess.

b) CategorizationofISO/TC130standards

TheISO/TC130standardscanbeorganizedintotwomajorcategoriesaccordingtothetechnicalcontentsofeachstandard.Thesecategoriesare:

l Multiple-processrelatedstandards,includingsevensub-categories

l Single-processrelatedstandards,includingsixsub-categories

c) Workinggroups

Workinggroupsareestablishedforspecifictasksinstandardsdevelopment.ThisdocumentgivesalistofactiveworkinggroupswithinISO/TC130asadditionalinformationforeasyreference.

Tosummarize,thisdocumentnotonlygivesacategorizationframeworkforISO/TC130standards,butalsodefinesthepurposeorrationaleofstandardsdevelopmentineachcategory.

Thisdocumentisintendedtoaddressthefollowingquestionsinauser’sfriendlyway:

• WhattechnicalissuesdoISO/TC130standardsdealwith?• WhoaretargetusersofISO/TC130standards?• HowtofindinterrelationshipamongISO/TC130standards?• WhoareresponsibleforISO/TC130standardsdevelopment?

Sincenewstandardswillbedevelopedandexistingstandardsarerevisedregularly,thisdocumentwillbeupdatedaccordingly.

ISO/TC130


2 Theprintworkflow

2.1 Processeswithinputsandoutputs

ISO/TC130standardsarerelatedtoprocessesintheprintworkflowasshowninFigure1.Uponprintbuyers’requests,printedproductscanbemanufacturedthrougheitheraconventionalprintingsystemoradigitalprintingsystem.Inaddition,ifdigitalproductsarerequired,electronicdeliveryisalsopossibleforcross-mediapublishing.Suppliersandprocesscontrolstakeholdersarelinkedtomultipleprocessesthroughouttheworkflow.

Rules,guidelinesorcharacteristicsforprintproductionactivitiesortheirresults,andrequirementsformaterials,equipmentandsystemsinvolvedinprocessesintheprintworkflowareprovidedbyISO/TC130standards.

NOTE1：Theellipsesrepresentprocesses.NOTE2:Therectanglesrepresentinputsandoutputs.NOTE3:Thesquaresrepresentstakeholders.

Figure1—Processeswithinputsandoutputsinatypicalprintworkflow

JobinitiationDatapreparationandexchange

Prepresstreatment

Printingformmaking

Printingoperation

Postpresshandling

Contractproof

Validationprint

Productrequest

Digitalfiles+specifications

Digitalfiles+specifications

Printingform

Printedsubstrate

Finishedproduct

Reporting/Supplier'sdeclarationofconformity

Finishedproduct/Certificationofproductconformity

Digitalfiles

Specifications

Contractproof/Digitalfiles+specifications

Logistics

Electronicdelivery

DigitalprintingConventionalprinting

Contractproof

Printbuyer

Multi-mediauser

Enduser

Supplier ProcessControl

ISO/TC130


2.2 Stakeholdersandtheirareasofresponsibility

Stakeholdersintheworkflowplayvariousroles.ThecontentsofISO/TC130standardsaddressissuesintheirareasofresponsibilityasshowninFigure2.Consequently,analysisofstakeholdersandtheirareasofresponsibilitycanhelptodefinethepurposeandapplicabilityofrelevantstandards.

Stakeholdersidentifyrolesanditispossiblethatmorethanonepersonisrequiredforaroleandthatasinglepersonmaytakeonmultipleroles.ThetasksundertakenbythePrintBuyer,theDesignerandthePre-PressOperatormaybeinterchangeable.Themultimediauserandtheenduserareoftenthemostimportantstakeholders,buttheyarenotincludedhereastheyarepassiverecipients,i.e.userswithoutresponsibilities.Moreinformationontherolesofthedifferentstakeholderscanbefoundinthedocument“Guidelinesforusingprintproductionstandards”(seeinISO/TC130websitehttps://committee.iso.org/home/tc130)

Figure2—Stakeholdersandresponsibleareas

Printbuyer Designer Prepress

operatorPrintingform

operatorPress

operatorPostpressoperator

Distributionagency

Stakeholders

Responsibilities

• Productrequest • Composition• Colormanagement• Preflightchecking• Digitalfileconversion• Proofing• ……

• Printproduction • Productpacking• Goodsdelivery• ……

• Creativedesign—Artworkintherelevantfileformatincludingfonts,imagesandintendedoutputICC-profile

• Postproduction—Surfacefinishing—Binding—Converting—……

• Formmaking

• Equipment,substrateandconsumablemanufactureandsupply

• Qualityassurance• Environmentalcontrol• ……

Supplier

Processcontrol

ISO/TC130


3 CategorizationofISO/TC130standards

In linewith the technical contents, the ISO/TC 130 standards can be organized into two categories:multiple-processrelated(seeTable1)andsingle-processrelated(seeTable2).Eachcategoryisdividedintoseveralsub-categories.Themultiple-processrelatedstandardsinTable1areapplicabletomorethanoneprocess.Thesingle-processrelatedstandardsinTable2areapplicabletospecificprocesses.Formoredetailsaboutthesestandards,seeTable3.

NOTE1 ISO/TC 130 has also published other deliverables, such as technical specifications, public availablespecificationsandtechnicalreports,eachofwhichfallswithinoneofthesecategories.NOTE2 “Guidelinesforusingprintproductionstandards”canbereferredtowhenusecasesofthesestandardsareneeded.

Table1—Standardsthatrelatetomorethanoneprocess

Terminology Media and materials

Measurement and testing

Process quality control

Conformity assessment

Ergonomics and safety

Environment and ecology

ISO5776ISO12637-1ISO12637-2ISO12637-3ISO12637-4

ISO2846-1ISO2846-2ISO11084-1ISO11084-2ISO12635ISO12636ISO15397

ISO2834-1ISO2834-2ISO2834-3ISO2836ISO12040ISO12632ISO12634ISO12644ISO12645ISO/TR12705ISO13655ISO15341ISO15790ISO/TS18621-11:2019ISO19594ISO20654

ISO12640-1ISO12640-1/Cor1:2004ISO12640-2ISO12640-2/Amd1:2007ISO12640-3ISO12640-4ISO12640-5ISO12641ISO12641-1ISO12642-1ISO12642-2ISO15076-1ISO/TR16066ISO18619ISO/TS21830

ISO15311-1ISO15311-2ISO19302

ISO/TR15847ISO12643-1ISO12643-2ISO12643-3ISO12643-4ISO12643-5

ISO16759ISO20294ISO20690ISO21632

NOTEISO14298“Graphictechnology—Managementofsecurityprintingprocesses”doesnotfallintoanyoftheabovecategories.

ISO/TC130


Table2—Standardsthatrelateprimarilytoasingleprocess

Job initiation Data preparation and exchange

Prepress treatment

Printing operation

Postpress handling

Product packing and logistics

ISO16762ISO19593-1

ISO12639ISO/TR14672ISO15930-1ISO15930-3ISO15930-4ISO15930-6ISO15930-7ISO15930-8ISO16612-1ISO16612-2ISO16613-1ISO16684-1ISO16684-2ISO16760ISO17972-1ISO17972-2ISO17972-3ISO17972-4ISO19445ISO20677ISO21812-1ISO28178

ISO/TS10128ISO12218ISO12646ISO12647-7ISO12647-8ISO14861ISO18620

ISO12647-1ISO12647-2ISO12647-3ISO12647-4ISO12647-5ISO12647-6ISO12647-6/Amd1:2005ISO/PAS15339-1ISO/PAS15339-2

ISO16763

NOTETheemptyspaceincolumnsmeansthatthereisnostandardinthatarea.TC130shouldconsiderwhetherastandardisrequired.

Table3—OverviewofpublishedstandardsofISO/TC130

No. Standardno. Whodeveloped

it

Standardname Sub-category

1 ISO2834-1:2006 WG4 Graphictechnology—Laboratorypreparationoftestprints—Part1:Pasteinks

Measurementandtesting

2 ISO2834-2:2015 WG4 Graphictechnology—Laboratorypreparationoftestprints—Part2:Liquidprintinginks


3 ISO2834-3:2008 WG4 Graphictechnology—Laboratorypreparationoftestprints—Part3:Screenprintinginks


4 ISO2836:2004 WG4Graphictechnology—Printsandprintinginks—Assessmentofresistanceofprintstovariousagents


5 ISO2846-1:2017 WG4

Graphictechnology—Colourandtransparencyofprintinginksetsforfour-colourprinting—Part1:Sheet-fedandheat-setweboffsetlithographicprinting

Mediaandmaterials

ISO/TC130


Table3—OverviewofpublishedstandardsofISO/TC130（continued）


it


6 ISO2846-2:2007 WG4Graphictechnology—Colourandtransparencyofprintinginksetsforfour-colourprinting—Part2:Coldsetoffsetlithographicprinting

Mediaandmaterials

7 ISO5776:2016 WG1 Graphictechnology—Symbolsfortextproofcorrection Terminology

8 ISO/TS10128:2009 WG3

Graphictechnology—Methodsofadjustmentofthecolourreproductionofaprintingsystemtomatchasetofcharacterizationdata

Prepresstreatment

9 ISO11084-1:1993 WG4

Graphictechnology—Registersystemsforphotographicmaterials,foilsandpaper-Part1:Three-pinsystems

Mediaandmaterials

10 ISO11084-2:2006 WG4

Graphictechnology—Registersystemsforphotographicmaterials,foilsandpaper—Part2:Registerpinsystemsforplatemaking

Mediaandmaterials

11 ISO12040:1997 WG4Graphictechnology--Printsandprintinginks--Assessmentoflightfastnessusingfilteredxenonarclight


12 ISO12218:1997 WG3 Graphictechnology—Processcontrol—Offsetplatemaking

Prepresstreatment

13 ISO12632:2015 WG4Graphictechnology—Ink,paperandlabels—Requirementsonhotalkalipenetrationandresistance


14 ISO12634:2017 WG4 Graphictechnology—Determinationoftackofpasteinksandvehiclesbyarotarytackmeter

Measurementandtesti5ng

15 ISO12635:2008 WG4 Graphictechnology—Platesforoffsetprinting—Dimensions

Mediaandmaterials

16 ISO12636:2018 WG4 Graphictechnology—Blanketsforoffsetprinting

Mediaandmaterials

17 ISO12637-1:2006 WG1 Graphictechnology—Vocabulary—Part1:

Fundamental Terminology


Prepressterms Terminology


Printingterms Terminology

ISO/TC130




it



Postpressterms Terminology

21 ISO12639:2004 WG2Graphictechnology—Prepressdigitaldataexchange—Tagimagefileformatforimagetechnology(TIFF/IT)

Datapreparationandexchange

22 ISO12639:2004/Amd1:2007 WG2

Graphictechnology—Prepressdigitaldataexchange—Tagimagefileformatforimagetechnology(TIFF/IT)—Amendment1:UseofJBIG2-Amd2compressioninTIFF/IT


23 ISO12640-1:1997 WG2

Graphictechnology—Prepressdigitaldataexchange—Part1:CMYKstandardcolourimagedata(CMYK/SCID)

Processqualitycontrol

24 ISO12640-1:1997/Cor1:2004

WG2

Graphictechnology—Prepressdigitaldataexchange—Part1:CMYKstandardcolourimagedata(CMYK/SCID)—TechnicalCorrigendum1


25 ISO12640-2:2004 WG2

Graphictechnology—Prepressdigitaldataexchange—Part2:XYZ/sRGBencodedstandardcolourimagedata(XYZ/SCID)


26 ISO12640-2:2004/Cor1:2008

WG2

Graphictechnology—Prepressdigitaldataexchange—Part2:XYZ/sRGBencodedstandardcolourimagedata(XYZ/SCID)—TechnicalCorrigendum1


27 ISO12640-3:2007 WG2

Graphictechnology—Prepressdigitaldataexchange—Part3:CIELABstandardcolourimagedata(CIELAB/SCID)


28 ISO12640-4:2011 WG2

Graphictechnology—Prepressdigitaldataexchange—Part4:Widegamutdisplay-referredstandardcolourimagedata[AdobeRGB(1998)/SCID]


29 ISO12640-5:2013 JWG9

Graphictechnology—Prepressdigitaldataexchange—Part5:Scene-referredstandardcolourimagedata(RIMM/SCID)


30 ISO12641:1997 WG2Graphictechnology—Prepressdigitaldataexchange—Colourtargetsforinputscannercalibration


ISO/TC130




it


31 ISO12641-1:2016 WG2

Graphictechnology-Prepressdigitaldataexchange—Colourtargetsforinputscannercalibration—Part1:Colourtargetsforinputscannercalibration


32 ISO12642-1:2011 WG2

Graphictechnology—Inputdataforcharacterizationoffour-colourprocessprinting—Part1:Initialdataset


33 ISO12642-2:2006 WG2

Graphictechnology—Inputdataforcharacterizationof4-colourprocessprinting—Part2:Expandeddataset


34 ISO12643-1:2009 WG5

Graphictechnology—Safetyrequirementsforgraphictechnologyequipmentandsystems—Part1:Generalrequirements

Ergonomics-Safety

35 ISO12643-2:2010 WG5

Graphictechnology—Safetyrequirementsforgraphictechnologyequipmentandsystems—Part2:Prepressandpressequipmentandsystems

Ergonomics-Safety

36 ISO12643-3:2010 WG5

Graphictechnology—Safetyrequirementsforgraphictechnologyequipmentandsystems—Part3:Bindingandfinishingequipmentandsystems

Ergonomics-Safety

37 ISO12643-4:2010 WG5

Graphictechnology—Safetyrequirementsforgraphictechnologyequipmentandsystems—Part4:Convertingequipmentandsystems

Ergonomics-Safety

38 ISO12643-5:2010 WG5

Graphictechnology—Safetyrequirementsforgraphictechnologyequipmentandsystems—Part5:Stand-aloneplatenpresses

Ergonomics-Safety

39 ISO12644:1996 WG4Graphictechnology—Determinationofrheologicalpropertiesofpasteinksandvehiclesbythefallingrodviscometer


40 ISO12645:1998 WG3Graphictechnology—Processcontrol—Certifiedreferencematerialforopaqueareacalibrationoftransmissiondensitometers


41 ISO12646:2015 WG3 Graphictechnology—Displaysforcolourproofing—Characteristics

Prepresstreatment

ISO/TC130




it


42 ISO12647-1:2013 WG3

Graphictechnology—Processcontrolfortheproductionofhalf-tonecolourseparations,proofandproductionprints—Part1:Parametersandmeasurementmethods

Printingoperation

43 ISO12647-2:2013 WG3

Graphictechnology—Processcontrolfortheproductionofhalf-tonecolourseparations,proofandproductionprints—Part2:Offsetlithographicprocesses

Printingoperation

44 ISO12647-3:2013 WG3

Graphictechnology—Processcontrolfortheproductionofhalf-tonecolourseparations,proofsandproductionprints—Part3:Coldsetoffsetlithographyonnewsprint

Printingoperation

45 ISO12647-4:2014 WG3

Graphictechnology—Processcontrolfortheproductionofhalf-tonecolourseparations,proofandproductionprints—Part4:Publicationgravureprinting

Printingoperation

46 ISO12647-5:2015 WG3

Graphictechnology—Processcontrolforthemanufactureofhalf-tonecolourseparations,proofandproductionprints—Part5:Screenprinting

Printingoperation

47 ISO12647-6:2012 WG3

Graphictechnology—Processcontrolfortheproductionofhalf-tonecolourseparations,proofsandproductionprints—Part6:Flexographicprinting

Printingoperation

48 ISO12647-6:2012/Amd1:2015

WG3

Graphictechnology—Processcontrolfortheproductionofhalf-tonecolourseparations,proofsandproductionprints—Part6:Flexographicprinting/Amd1:2015

Printingoperation

49 ISO12647-7:2016 WG3

Graphictechnology—Processcontrolfortheproductionofhalftonecolourseparations,proofandproductionprints—Part7:Proofingprocessesworkingdirectlyfromdigitaldata

Prepresstreatment

50 ISO12647-8:2012 WG3

Graphictechnology—Processcontrolfortheproductionofhalf-tonecolourseparations,proofandproductionprints—Part8:Validationprintprocessesworkingdirectlyfromdigitaldata

Prepresstreatment

51 ISO/TR12705:2011 WG4 Graphictechnology—Laboratorytestmethod

forchemicalghostinginlithographyMeasurementandtesting

ISO/TC130




it


52 ISO13655:2017 JWG8Graphictechnology—Spectralmeasurementandcolourimetriccomputationforgraphicartsimages


53 ISO14298:2013 WG10 Graphictechnology—Managementofsecurityprintingprocesses Notrelevant

54 ISO/TR14672:2000 WG2 Graphictechnology—Statisticsofthenatural

SCIDimagesdefinedinISO12640


55 ISO14861:2015 WG3 Graphictechnology—Requirementsforcoloursoftproofingsystems

Prepresstreatment

56 ISO15076-1:2010 JWG7

Imagetechnologycolourmanagement—Architecture,profileformatanddatastructure—Part1:BasedonICC.1:2010


57 ISO/TS15311-1:2019 WG3

Graphictechnology—Printqualityrequirementsforprintedmatter—Part1:Measurementmethodsandreportingschema

ConformityAssessment

58 ISO/TS15311-2:2018 WG3

Graphictechnology—Printqualityrequirementsforprintedmatter—Part2:Commercialprintapplicationsutilizingdigitalprintingtechnologies


59 ISO/PAS15339-1:2015 WG3

Graphictechnology—Printingfromdigitaldataacrossmultipletechnologies—Part1:Principles

Printingoperation

60 ISO/PAS15339-2:2015 WG3

Graphictechnology—Printingfromdigitaldataacrossmultipletechnologies—Part2:Characterizedreferenceprintingconditions,CRPC1-CRPC7

Printingoperation

61 ISO15341:2014 WG4 Graphictechnology—Methodforradiusdeterminationofprintingcylinders Measurement

andtesting

62 ISO15397:2014 WG4 Graphictechnology—Communicationofgraphicpaperproperties

Mediaandmaterials

63 ISO15790:2004 WG6

Graphictechnologyandphotography-Certifiedreferencematerialsforreflectionandtransmissionmetrology—Documentationandproceduresforuse,includingdeterminationofcombinedstandarduncertainty


ISO/TC130




it


64 ISO/TR15847:2008 WG5

Graphictechnology—Graphicalsymbolsforprintingpresssystemsandfinishingsystems,includingrelatedauxiliaryequipment

Ergonomics-Safety

65 ISO15930-1:2001 WG2

Graphictechnology—Prepressdigitaldataexchange—UseofPDF—Part1:CompleteexchangeusingCMYKdata(PDF/X-1andPDF/X-1a)


66 ISO15930-3:2002 WG2

Graphictechnology—Prepressdigitaldataexchange—UseofPDF—Part3:Completeexchangesuitableforcolour-managedworkflows(PDF/X-3)


67 ISO15930-4:2003 WG2

Graphictechnology—PrepressdigitaldataexchangeusingPDF—Part4:CompleteexchangeofCMYKandspotcolourprintingdatausingPDF1.4(PDF/X-1a)


68 ISO15930-6:2003 WG2

Graphictechnology—PrepressdigitaldataexchangeusingPDF—Part6:Completeexchangeofprintingdatasuitableforcolour-managedworkflowsusingPDF1.4(PDF/X-3)


69 ISO15930-7:2010 WG2

Graphictechnology—PrepressdigitaldataexchangeusingPDF—Part7:Completeexchangeofprintingdata(PDF/X-4)andpartialexchangeofprintingdatawithexternalprofilereference(PDF/X-4p)usingPDF1.6


70 ISO15930-8:2010 WG2

Graphictechnology—PrepressdigitaldataexchangeusingPDF—Part8:PartialexchangeofprintingdatausingPDF1.6(PDF/X-5)


71ISO15930-8:2010/Cor1:2011

WG2

Graphictechnology—PrepressdigitaldataexchangeusingPDF—Part8:PartialexchangeofprintingdatausingPDF1.6(PDF/X-5)/Cor1:2011


72 ISO/TR16066:2003 WG2

Graphictechnology—Standardobjectcolourspectradatabaseforcolourreproductionevaluation(SOCS)


73 ISO16612-1:2005 WG2

Graphictechnology—Variableprintingdataexchange—Part1:UsingPPML2.1andPDF1.4(PPML/VDX-2005)


ISO/TC130




it


74 ISO16612-2:2010 WG2

Graphictechnology—Variabledataexchange—Part2:UsingPDF/X-4andPDF/X-5(PDF/VT-1andPDF/VT-2)


75 ISO16613-1:2017 WG2

Graphictechnology—Variablecontentreplacement—Part1:UsingPDF/Xforvariablecontentreplacement(PDF/VCR-1)


76 ISO16759:2013 WG11Graphictechnology—Quantificationandcommunicationforcalculatingthecarbonfootprintofprintmediaproducts

Environmentandecology

77 ISO16760:2014 WG2Graphictechnology—Prepressdataexchange—PreparationandvisualizationofRGBimagestobeusedinRGB-basedgraphicsartsworkflows


78 ISO16762:2016 WG12 Graphictechnology—Post-press—Generalrequirementsfortransfer,handlingandstorage Jobinitiation

79 ISO16763:2016 WG12 Graphictechnology—Post-press–Requirementsforboundproducts

Postpresshandling

80 ISO17972-1:2015 WG2 Graphictechnology—Colourdataexchange

format-Part1:RelationshiptoCxF3(CxF/X)


81 ISO17972-2:2016 WG2

Graphictechnology—Colourdataexchangeformat(CxF/X)—Part2:Scannertargetdata(CxF/X-2)


82 ISO17972-3:2017 WG2

Graphictechnology—Colourdataexchangeformat(CxF/X)—Part3:Outputtarget(CxF/X-3)


83 ISO17972-4:2018 WG2

Graphictechnology—Colourdataexchangeformat(CxF/X)—Part4:Spotcolourcharacterisationdata(CxF/X-4)


84 ISO18619:2015 JWG7 Imagetechnologycolourmanagement—Blackpointcompensation


85 ISO18620:2016 WG2 Graphictechnology–Prepressdataexchange—Toneadjustmentcurvesexchange

Prepresstreatment

86 ISO/TS18621-11:2019 JWG14 Imagequalityevaluationmethodsforprinted

matter—Part11:ColourgamutanalysisMeasurementandtesting

ISO/TC130




it


87 ISO19302:2018 WG13 Graphictechnology—Colourconformityofprintingworkflows


88 ISO19445:2016 WG2Graphictechnology—Metadataforgraphicartsworkflow—XMPmetadataforimageanddocumentproofing


89 ISO19593-1:2018 WG2

Graphictechnology--UseofPDFtoassociateprocessingstepsandcontentdata--Part1:Processingstepsforpackagingandlabels Jobinitiation

90 ISO19594:2017 WG12

Graphictechnology—Testmethodforthedeterminationofthebindingstrengthforperfect-boundproducts—Page-pulltestworkingupwards


91 ISO20294:2018 JWG15 Graphictechnology—Quantificationforcalculatingthecarbonfootprintofe-media


92 ISO20654:2017 WG3 Graphictechnology—Measurementandcalculationofspotcolourtonevalue


93 ISO20677:2019 JWG7 Imagetechnology—Extensionstoarchitectureprofileformatanddatastructure


94 ISO20690:2018 WG11Graphictechnology—Determinationoftheoperatingpowerconsumptionofdigitalprintingdevices


95 ISO21632:2018 WG11Graphictechnology—Determinationoftheenergyconsumptionofdigitalprintingdevicesincludingtransitionalandrelatedmodels


96 ISO21812-1:2019 WG2

Graphictechnology—PrintproductmetadataforPDFfiles—Part1:Architectureandcorerequirementsformetadata


97 ISO/TS21830：2018 JWG7 Imagetechnologycolourmanagement--Black

pointcompensationforn-colourICCprofiles


98 ISO28178:2009 WG2Graphictechnology—ExchangeformatforcolourandprocesscontroldatausingXMLorASCIItext


ISO/TC130


NOTETheabovelistwasgivenontheISOwebsiteStandardand/orprojectofISO/TC130asofDecember312019.ItistobeupdatedbytheISOCentralSecretariataccordingtoISOprojectdatabase.

4 FrameworkforISO/TC130standards

Based on the above categorization, a framework for ISO/TC130 standards, intended or existing, isestablishedinthehierarchicalmodelshowninFigure3.

Figure3—FrameworkforISO/TC130standards

Therearesevensub-categoriesinthemultiple-processrelatedcategoryandsixsub-categoriesinthesingle-processrelatedcategory.ThepurposeofstandardsdevelopmentineachcategoryisoutlinedinTable4andTable5.

ISOTC130Standards

Multiple-processrelated

Terminology

Mediaandmaterials



Conformityassessment

Ergonomicsandsafety


Single-processrelated

Jobinitiation


Prepresstreatment

Printingoperation

Postpresshandling

Productpackingandlogistics

ISO/TC130


Table4—Purposeofstandardsdevelopmentofthemultiple-processrelatedcategory

Sub-category Purpose

Terminology Defining the relevant concept for similar interpretation indifferentprocesses

Mediaandmaterials Establishingprintabilityrequirementsformediaandmaterialsusedintherelatedprintingprocess

Measurementandtesting Givingprovisionsconcerningthemethodsofmeasurementandtesting,relevantdevicesandmaterialstoensuretheresultsareaccurateandreliable

Processqualitycontrol Establishingrequirementsandmethodsforqualitycontrolintheprintworkflow,suchascolourmanagement

Conformityassessment Developing conformity assessment guidelines for printedproducts, processes, services, persons and systems; these aredeterminedtomeettherelevantstandardsorspecifications

Ergonomicsandsafety Establishing requirements for a healthy and safe workingenvironment

Environmentandecology Evaluatingtheimpactofprintingprocessesandprintedproductsontheenvironmentwiththeaimofthesustainabledevelopmentoftheindustry

Table5—Purposeofstandardsdevelopmentofthesingle-processrelatedcategory

Sub-category Purpose

Jobinitiation Providingguidelinesforgraphicdesignersorrelevantpartiestoensurethatthedesireditemsfitintotheproductionlinesothattheyareprocessed,printedandfinishedcorrectly


Definingfileformatsfordataexchange,makingitpossiblefordatatobesharedintherelevantreproductionprocesses

Prepresstreatment Establishingrequirementsfordataprocessing,printingformmaking,proofingandcross-mediapublishing

Enablingtheprocesseddatatomatchthefinaloutputdevices

Printingoperation Establishingrequirementsforprocesscontroltoensureprintingonvarioussubstrateswithwell-definedparameters

Postpresshandling Establishingrequirementsforsurfacefinishing,bindingandconvertingoperationstoensurereliableresults

Productpackingandlogistics

Establishingrequirementsforpackinganddeliveryoffinishedproductstofacilitateintegrationoflogisticsinaninternet-basedenvironment

ISO/TC130


5 WorkinggroupsforISO/TC130standardsdevelopmentWorkinggroups(WGs),Jointworkinggroups(JWGs)andTaskForces(TFs)areestablishedforstandardsdevelopmentandeachWG,JWGorTFundertakesspecifictasks.TheactiveISO/TC130WGsandTFsaregiveninTable6,thejointworkinggroups(JWGs)undertheresponsibilityofISO/TC130aregiveninTable7, the jointworking groupsunder the responsibility anotherTechnicalCommitteewithTC130participationaregiveninTable8.ThetitleofeachWG(JWG,TF)suggests,tosomedegree,thesphereofactivity.

NOTE TheISOwebpagethatshowsworkinggroupscanbefoundunderthelink:StructureofISO/TC130

Table6—ActiveworkinggroupsandtaskforcesofISO/TC130

Groupno. Grouptitle

ISO/TC130TF3 Workflowstandardsroadmap

ISO/TC130/WG1 Terminology

ISO/TC130/WG2 Prepressdataexchange

ISO/TC130/WG3 Processcontrolandrelatedmetrology

ISO/TC130/WG4 Mediaandmaterials

ISO/TC130/WG5 Ergonomics-Safety

ISO/TC130/WG11 Environmentalimpactofgraphicstechnology

ISO/TC130/WG12 Postpress

ISO/TC130/WG13 Printingconformityassessmentrequirements

Table7—JointworkinggroupsundertheresponsibilityofISO/TC130

Groupno. Grouptitle

ISO/TC130/JWG7 Colourmanagement(JointISO/TC130-ICCWG)

ISO/TC130/JWG10 Managementofsecurityprintingprocesses(JointISO/TC130–TC292)

ISO/TC130/JWG14 Printqualitymeasurementmethods (Joint ISO/TC130 -TC42 - ISO/IECJTC1/SC28WG)

ISO/TC130


Table8—JointworkinggroupsundertheresponsibilityofanotherCommittee

Groupno. Grouptitle

ISO/TC6/JWG12

Deinkabilitypotential(JointISO/TC6–TC130WG)

ISO/TC6/SC2/WG39

Printabilitytesting(JointISO/TC6/SC2–TC130WG)

ISO/TC42/JWG20 Digitalstillcameras(JointISO/TC42–IECWG)

ISO/TC42/JWG21 Density measurements (Revision of ISO 5 series) (JointISO/TC42–TC130WG)

ISO/TC42/JWG22

Colourmanagement(JointIEC/TC100-ISO/TC42-TC130WG)

ISO/TC42/WG23

Extended colour encodings for digital image storage,manipulationandinterchange(JointISO/TC42-TC130-CIEWG)

ISO/TC42/WG25

Use of XMP for digital photography (Joint ISO/TC42 - TC130)

ISO/TC42/JWG27

Imagepermanence&durabilitytestmethodsandspecificationsfordigitalprintsincommercialapplications(JointISO/TC42-ISO/IEC/JTC1/SC28–ISO/TC130WG)

ISO/TC171/SC2/WG5 Documentmanagementapplications–Applicationissues–PDF/A(JointISO/171/SC2–TC42–TC46/SC11–TC130WG

Framework for ISO/TC 130 standards › files › live › sites › tc130 › files ›...

Documents

Transcript of Framework for ISO/TC 130 standards › files › live › sites › tc130 › files ›...