FOT Catalog 2016

Fibra Opticas TekProduct Catalog

(2016)

Expert on Test& MeasurementPassive Components

- 1 -

Optical Fiber Fusion Splicer---------AV6471 Updated Version

AV6471 Optical Fiber Fusion Splicer adopts a brand new design. Its powerful function and super low splicing loss fullysatisfies the requirements for fiber splicing of backbone and FTTX. Its environmental adaptability is good since its lightweightbody and exquisite design. With new fiber imagery system and digital design, image display is more delicate and clearer.Real-time embedded operation system provides user-friendly operation interface and more useful functions. Built-in largecapacity Li-on battery supports long time operation in the field. Real-time match system for temperature, humidity and airpressure makes it flexibly adapt the changing environment and obtain low insertion loss after splicing in harsh environment.

Features：

-Updated Ceramic V-groove, more precisely locate;-Elastic fiber holder to fit flat drop cable and pigtail;-Lightweight and 5.7 inch high definition LCD digital monitor;- High efficiency: 8 seconds for splicing and 25 seconds for heat shrinking;-Automatically splicing after closing shield, automatically heatingafter closing heating cover;

-Display X/Y axis meanwhile, magnification up to 304 times-Real time calibrating system-Built-in high capacity Li-on battery, supports 220 times splicing and heating

Specification:

Parameters SpecificationsAlign Mode Advanced Profile Alignment (PAS)Operation Mode Auto, Half and ManualFiber Types Singe Mode (ITU-T G.652)

Multimode (ITU-T G.651)Dispersion shifted (ITU-T G.653)Non-zero dispersion shifted (ITU-T G.655)

Average Splicing Loss SM: 0.02dBMM: 0.01dBDS & NZDS: 0.04dB

Return Loss (dB) ≥60dBFiber Diameter Cladding diameter: 80µm~150µm，

Coating diameter: 100µm~1000µmFiber Cleave Length 8~16mm (coating diameter < 250µm)

16mm (coating diameter 250 ~ 1000µm)Splicing Time (s) 8s (Typical Splicing Time)Heating Time (s) 30s (Typical Heating Time)Data Transmission USB & VGAHeat-Shrinkable Tube 40mm, 60mm and a series of micro Heat-Shrinkable TubingMagnification Vertical 152 times, horizontal 304 times.Screen Display 5.7 inch, 640*480 LCD.Backlight Built-in super High-brightness LED supply convenience for

night workGeneral Specification

- 2 -

Power SupplyBuilt in 11.1V Li-on Battery with AC AdaptorAlternating Current: 100~240V，50/60Hz, 30mW;Direct Current: 13.5V/4.5A

Battery capacity Support 200 times splicing and heating on one charge(3.5hrs)

Battery Lifetime Cycle life up to 300~ 500 times, replaceable.Electrode Lifetime >4000 times, replaceableTension Test (N) 2NOperating Temp. (℃) -10℃～50℃Relative Humidity 0~95%(40℃, non considering )Work Altitude 0~5000mWeight (Kg) 2.3kg(Without battery), 2.8kg(with battery)Dimensions (mm) 160(L)×150(W)×140(H) (mm)

Packing ListItem Name1 Fusion Splicer2 Fiber Cleaver3 AC Power Adapter4 AC Power Cord5 Spare Electrode6 Cooling Tray7 Alcohol Pump Bottle8 Blower Brush9 CFS-2 Fiber Optic Stripper10 User’s Manual (CD)11 Carrying Case

- 3 -

FTTH Optical Fiber Fusion Splicer---------AV6471A

AV6471A FTTH Fiber Optic Fusion Splicer adopts a brand new design for FTTH Drop cable and patch cord. Its lightweightbody and exquisite design makes it easy to use even under a confined space. With new fiber imagery system and digitaldesign, image display is more delicate and clearer. Real-time embedded operation system provides user-friendly operationinterface and more useful functions. Built-in large capacity Li-on battery supports long time operation in the field. Real-timematch system for temperature, humidity and air pressure makes it flexibly adapt the changing environment and obtain lowinsertion loss after splicing in harsh environment.

Features:-Especial applicable for FTTH drops cable and patch cord.- Precising optical fiber core alignment system- Lightweight and 5.7 inch high definition LCD digital monitor;- High efficiency: 8 seconds for splicing and 25 seconds for heat shrinking;- Automatically splicing after closing shield, automatically heating afterclosing heating cover;

- Display X/Y axis meanwhile, magnification up to 304 times- Real time ARC calibrating system- Built-in high capacity Li-on battery, supports 220 times splicing and heating.

SpecificationParameters SpecificationAlign Mode Advanced Profile Alignment (PAS)Operation Mode Auto, Half-auto and Manual

Fiber Types

Singe Mode (ITU-T G.652)Multimode (ITU-T G.651)Dispersion shifted (ITU-T G.653)Non-zero dispersion shifted (ITU-T G.655)

Average Splicing LossSM: 0.02dBMM: 0.01dBDS & NZDS: 0.04dB

Return Loss (dB) ≥60dB

Fiber Diameter

250um bare fiber900um optical cable3.0mm FTTH Drop Cable;SC/FC Connector

Fiber Cleave Length 8~16mm (coating diameter < 250祄)Splicing Time (s) 8s (Typical Splicing Time)Heating Time (s) 30s (Typical Heating Time)Data Transmission USB & VGAHeat-Shrinkable Tube 40mm, 60mm and a series of micro Heat-Shrinkable TubingMagnification Vertical 152 times, horizontal 304 times.Screen Display 5.7 inch, 640*480 LCD.Backlight Built-in super High-brightness LED supply convenience for

night workGeneral SpecificationPower Supply Built in 11.1V Li-on Battery with AC Adaptor

- 4 -

Alternating Current: 100~240V，50/60Hz, 30mW;Direct Current: 13.5V/4.5A

Battery Life Support 220 times splicing and heating on one charge(3.5hrs)

Battery Lifetime Cycle life up to 300~ 500 times, replaceable.Electrode Lifetime >4000 times, replaceableTension Test (N) 2NOperating Temp. (℃) -10℃～50℃Relative Humidity 0~95%(40℃, non considering )Work Altitude 0~5000mWeight (Kg) 2.3kg(Without battery), 2.8kg(with battery)Dimensions (mm) 160(L)X50(W)X40(H) (mm)

Packing ListItem Name Quantity1 Fusion Splicer 1 Set2 Fiber Cleaver 1 PC3 Fiber Holder FH-1000A-IN(for single

fiber)1 Pair

4 Fiber Holder FH-1000A-250(for dropcable)

1 Pair

5 Fiber Holder FH-1000A-3.0-R(for patchcord)

1 PC

6 AC Power Adapter 1 PC7 AC Power Cord 1 PC8 Spare Electrode 1 Pair9 Heating Pad 1 PC10 Cooling Tray 1 PC11 Alcohol Pump Bottle 1 PC12 Blower Brush 1 PC13 Drop Cable Stripper 1 PC14 CFS-2 Fiber Optic Stripper 1 PC15 User’s Manual (CD) 1 PC16 Carrying Case 1 PC17 SC Connector Holder

FH-1000A-SC-R(Optional)1 PC

- 5 -

Palm OTDR---------FOT3302B

FOT3302B hand held OTDR is mainly used to measure the parameters of optical fibers and cables, such as length, loss, andconnection quality, etc.; it can realize the accurate positioning of event points and fault points, and can be widely used in theconstruction, maintenance testing and emergency repair of the optical fiber communication systems as well as the research,production and production measurement of optical fibers and cables and so on. This product can provide you with the highestperformance of solutions for installation and construction of fiber optic network construction and the subsequent fast andefficient maintenance and troubleshooting testing.

Features--The industry's most convenient and easy operation mode;

- Optimization of the test parameters, simplifying the user tedious setup process.

- Short event dead zone, makes it easy to test fiber patch cord;

- With automatic testing, manual testing and other test modes;

- optical traffic detection and alarm function, to avoid damage to the device;

- Built-in VFL (≥5km);

- USB interface for fast file transfer;

- Replaceable connectors: FC/ST/SC(APC or UPC);

- Highly intelligent analysis software can accurately identify the failed splices,connectors or even macro bending;

The industry's most simple and intuitive operation mode

FOT3302B OTDR has the most simple user interface, easy and intuitive style. Theoptimized interface has only six operation menu, operation is very simple. Evenwithout professional training ,users can easily learn how to use.

Convenient one-click analysisFOT3302B series OTDR provides a separated shortcut trace analysis, can quickly

and accurately find out the point of failure and event , in the form of event table listsall the event information.

Excellent Testing Performance

- 6 -

With extra-short dead zone and big dynamic range, FOT3302B can easily test fiberpatch cord and test hundreds of kilometers of long-distance link .

Efficient and flexible simulation software

The intelligent simulation software can analyze and edit the testing data savedby the OTDR easily and quickly.

Specification

Model FOT3302BType of optical fiber Single –modeCenter wavelength 1310nm/1550nm

±20nm

Maximum dynamic range (dB) ○1 30/28

Event blind zone ○2 1.5m

Attenuation blind zone 10mDisplay type 3.5inch, color LCD, touch screen operationOptical interface FC/UPC (Interchangeable SC, ST)Test range (dB) 500m,1km,2km,4km,8km

16km,32km,64km,128kmPulse width 10,30,50,100,275

500,1000,5000,10000nsRange accuracy ± (1m + sampling interval +0.005% × distance)Attenuation measurement accuracy ±0.05 dB/dBReflection measurementaccuracy

±4dB

Data storage ≥ 1000 test tracesCommunication interface USB

VFLOutput power ≥2mWTest distance ≥5 km

Environmental adaptabilityPower supply mode AC / DC adapter: AC: 100V ~ 240V (1.5A),

50/60HzDC: 18V to 20V (2A)Internal lithium-ion battery pack: 7.4V,

- 7 -

4400mAh

Battery operation time ○3 ≥ 10hours

Operating temperature -5℃ ～ 50℃Storage temperature -20℃ ～ 70℃Relative humidity 0 ～ 95％, no condensationWeight ≤ 1kgVolume 208mm × 110mm × 56mm

Standard Package

OTDR 1 unitUser’s manual 1 pcAD/DC adapter 1 pcCarrying bag 1 pcCertificate 1 pcUSB Disk(including the analysis software) 1 pcPower cord 1 pcStylus pen 1 pc

- 8 -

PON OTDR---------AV6418

AV6418 series’ OTDR is designed for FTTx network testing, with high performance and multifunction. It is featured withshort event dead zone, fast test and analysis speed,AV6418 is an ideal access and FTTH network testing equipment, supportsPON testing via 1×32, 1×64 splitter. 1m extra short dead zone and 0.05m high distance resolution makes AV6418 possible toanalyze all events between the transmitter and central office.

Features:- Handheld, lightweight and convenience for carrying.- Advanced anti-reflective TFT LCD screen- 1m extra-short event dead zone- Fast auto measurement, one-button operating- 42dB high dynamic range, 0.05m high resolution, 128ksampling points- Fast auto measurement, one-button operating- Automatically monitoring communication signal.- Dual USB interface, supporting USB stick, printer and direct

cable download to PC via ActiveSync- Supporting Bellcore GR196 file format in writing or reading- WinCE operation system- Built-in high capacity Li-on battery supports 8 hours working.- Universal FC/PC, FC/SC, FC/ST connector type.

Specification:

OTDR Module CentralWavelength(nm)

Fiber Type Dynamic Range1(dB) Event Dead Zone2(m)

AV6418-2101 1310/1550nm SM 42/40 2/2AV6418-3103 1310/1550/1625nm

(with Filter)SM 39/37/37 1/1/1

Measuring Mode Manual mode (including real time mode and average mode),Auto mode and Dead Zone Mode.

DistanceMeasurementAccuracy

±(1m + sampling interval + 0.003% × distance) (Refractive error are not included)

Sample Resolution (m) 0.05, 0.1, 0.2, 0.5, 1,2, 4, 8,16 (m)Distance measurementrange (KM)

0.4, 0.8, 1.6, 3.2,6.4, 16, 32, 64, 128, 256, 512km(Single Mode)0.4, 0.8, 1.6, 3.2,6.4, 16, 32 (MM, 850nm)

Pulse widths (nominal) 5, 10, 30, 80, 160, 320, 640, 1280, 5120, 10240, 20480ns5, 10, 30, 80, 160, 320, 640, 1280 (MM, 850nm)

Loss threshold (dB) 0.01dBLoss Resolution(dB) 0.01dBSampling Points 128kLinearity 0.05dB/dBMemory Capacity ≥800 traces (device memory); ≥65500 trace (present with 2G SD card)IOR Setting 1.00000~2.00000Unit of Measurement Kilometer; meter, Mille feet and feet

- 9 -

DistanceScreen Display 6.5inch, 640×480 colorful TFT LCD Touch ScreenData Transmission USB, Min-USB, Ethernet, Earphone and SD.Optical Interface FC/UPC, SC/ST is availableGeneral Specification

Power SupplyAC/DC Adapter:Alternating Current: 100~240V, 1.5A，50/60Hz;Direct Current: 19V±2V(2A)

Battery Built in 14.8VLi-on BatteryBattery Life Supports 8 hrsOperating Temp. (℃) -10℃～50℃ (Battery under charging: 5℃～40℃)Storage Temp. (℃) -40℃～70℃ (without battery); -20℃～60℃ (with battery)Relative Humidity 5~95%( non considering )Weight (Kg) 3kgDimensions (mm) 295mm×186mm×75mm

Packing listName QuantityAV6418 OTDR 01 unitAC/DC Adapter 1 PCPower Cord 1 PCUser Manual 1 PCCD 1PCConnectors (SC, ST) 2 PCCarrying Case 1 PC

- 10 -

Hand held Optical Power Meter---------FOT3216 Series

FOT3216 Handheld Optical Power Meter is FOT newly designed fiber optic tester, it aims at fiber network installation, fibernetwork engineering acceptance and fiber network maintenance. Combined usage with FOT3116 handheld optical lightsource, it offers a quick and accurate testing solution on both SM and MM fibers. Compared with usual power meters, theFOT3216 has more great functions/features of automatic wavelength identification and switching and intelligent backlightcontrol. Also the FOT3216 features good appearance, good touch feeling and considerate humanity design.

Features* Wave ID—Automatic wavelength identification and switching (when used with FOT3116handheld light source)* Frequency ID/Tone detection---Automatic frequency identification*Intelligent backlight control (light intensity can be adjusted properly according to ambientlight, which greatly reduced power consumption)* Data storage function, up to 1000 test records* USB communication port for saved testing records download* Reference power level can be set up and stored* User self calibration function* Auto-off function can be activated or deactivated.* AA alkaline and AC adapter for power supply* Low battery indication

SpecificationsModel FOT3216A FOT3216C

Calibrated（nm）wavelength 850, 1300,1310,1490,1550,1625

Detector type InGaAs

Measurement Range（dBm） -70～+6 -50～+26

Uncertainty (dB) ±0.15（3.5%）

linearity (dB) ±0.02

Display resolution(dB) 0.01

Frequency ID（Hz） 270，330，1K，2K

Wave ID（nm） 1310，1490，1550，1625

Date storage capacity 1000

Communication Port USB

Optical Connector type FC,SC,ST interchangeable

Alkaline battery 3*AA，1.5V

Power Supply Adaptor(V) 8.4

Battery Operating time (h) 200

Operation Temperature(℃) -10～+60

Storage Temperature(℃) -25～+70

Outline size（mm）/weight 180*90*45(250g)

Standard PackagesMODEL INCLUDES

All FOT3216 Models FOT3216 Optical Power Meter, 3pcs 1.5V batteries, AC Adaptor,User Manual, Cotton swabs and Soft carrying case.

- 11 -

Optical Power Meter---------FOT3211 Series

FOT3211 optical power meter Is a handheld optical power meter, newly released in 2015, which can be used for absoluteoptical power measurements as well as for relative loss measurements in optic fiber networks. An Ø1.0mm photosensitivearea photodiode is used to significantly improve the stability and the reliability. It features ingenious appearance, wide rangeof power measurement, high accuracy, user self-calibration function andreference power level storage.Features* Wide dynamic measurement range (up to 80dB)* Reference power level storage(Ref Setting)*User self-calibration function*Comfortable LCD display and backlight LCD display supportsnight operation.* Power measurements in dBm or mw and insertion loss in dB*10 minutes Auto-off function can be activated or deactivated.* AA alkaline batteries can last more than 140 hours, AC adaptor also available* Low battery indicationApplicationsTelecomMaintenanceCATV MaintenanceFiber Optic lab testingOther Fiber Optic MeasurementsSpecificationsMODEL FOT3211A FOT3211C

Wavelength(nm) 800~1700nm

Detector Type InGaAs

Detector Size Ø 1.0mm

Measurement Range (dBm) -70~+10 -50~+30

Uncertainty ±5%

Calibrated Wavelength(nm) 850,1300,1310,1490,1550,1625

Resolution(dB) 0.01

Optical Connector FC(interchangeable SC,ST) / as well as 2.5mm universal

Power Supply Alkaline Battery(3 AA 1.5V batteries); AC Adaptor(9V)

Battery Operating Time 140 h with 1.5V Battery(3pcs)

Operating Temperature(℃) -10 ~ +60

Storage Temperature(℃) -25 ~ +70

Relative Humidity 0 to 95% (non-condensing)

Dimension(mm) 190X100X50

Weight(g) 370


All FOT3211 Models FOT3211 Optical Power Meter, 3pcs 1.5V batteries, AC Adaptor,User Manual, Cotton swabs and Soft carrying case.

- 12 -


FOT3208 hand held optical power meter is a compact and an easy-to-use testing instrument for optical fiber networks, whichcan be used for absolute optical power measurements as well as for relative loss measurements in optical fibers. It featuresingenious appearance, wide range of power measurement, high accuracy and user self-calibration function with highperformance-to-price ratio.

Features*User self calibration function*Comfortable LCD display and optional back light LCD display supportsnight operation*Power measurements in dBm or mw and insertion loss in dB*Low battery consumption, more than 240 hours continual operation timefor three 1.5V alkaline batteries*10 minutes Auto-off function can be activated or deactivated.

ApplicationsMaintenance in TelecomMaintenance CATVFiber Optic Lab TestingOther Fiber Optic Measurements

Specifications

Type FOT3208A FOT3208C

Wavelength(nm) 800~1700nmDetector InGaAsMeasurement Range (dBm) -70~+3 -50~+26Uncertainty ±5%Calibrated Wavelength(nm) 850,1300,1310,1490,1550,1625Resolution(dB) 0.01Optical Connector FC(interchangeable SC,ST) / as well as 2.5mm universalPower Supply Alkaline Battery(3 AA 1.5V batteries)Battery Operating Time 240 h with 1.5V Battery(3)Operating Temperature(℃) -10 ~ +60Storage Temperature(℃) -25 ~ +70Relative Humidity 0 to 95% (non-condensing)Dimension(mm) 175x82x33Weight(g) 310

Standard PackagesMODEL INCLUDESAll FOT3208 Models FOT3208 Optical Power Meter, Protective Rubber Boot, 3pcs 1.5V batteries, User

Manual, Cotton swabs and Soft carrying case.

- 13 -


FOT3205 mini handheld optical power meter is the most lightweight and compact in size testing instrument. It featuresease-of-use and economy advantages and can be used for absolute power measurement in optical fibers. FOT3205 incombination with the FOT3110 mini handheld light source become the most portable and advantageous testing pair.

Features*The most compact in size, ideal for field operation*Power measurements in dBm and mw.*10 minutes Auto-off function conserving battery life


SpecificationsType FOT3205A FOT3205C

Wavelength(nm) 800~1700nm

Detector InGaAs

Measurement Range (dBm) -70~+6 -50~+26

Uncertainty ±5%

Calibrated Wavelength(nm) 850,1300,1310,1490,1550,1625

Resolution(dB) 0.01

Optical Connector FC(interchangeable SC,ST) / as well as 2.5mm universal

Power Supply Alkaline Battery

Battery Operating Time 360 hours with three 1.5V batteries

Operating Temperature(℃) -10 ~ +60

Storage Temperature(℃) -25 ~ +70

Relative Humidity 0 to 95% (non-condensing)


Weight(g) 105

Standard PackagesMODEL INCLUDESAll FOT3205 Models FOT3205 Optical Power Meter, Alkaline battery, Instruction Manual,

Cotton swabs and Protective Holster.

- 14 -

PON Optical Power Meter—FOT3213 series

FOT3213 Series PON Optical Power Meter target at the FTTx application and maintenance. This power meter is able tosimultaneously test and estimate the signals of the voice, data and video. It is an essential and ideal tool for the constructionand maintenance of the PON projects.

Features：* It can experiment at Voice, data and video signal synchronous measurement anddisplay on BPON/EPON/GPON.* Providing simultaneous measurement for all three wavelengths on the fiber (1490nm,1550nm,1310nm).* Used in Burst mode measurement of 1310nm upstream.* Use the software connect with PC, setting the threshold, data transfer, andcalibration the wavelength.* USB communication port enables data transfer to a PC.1000measurement items canbe saved in 3213 PON power meter or computer for data review.* With optical power meter modual, include 850、1300、1310、1490、1550、1625sixs( 3213AP，3213A without 850nm wavelength）；With visual fault locatormodual（3213and3213AV）* Optical power meter and VFL with one port.（only 3213A）* Optional Chinese/English display.* Offers up to 10 different threshold sets in total,Three status LEDs represent different optical signal conditions of Pass, Warnand Fail respectively.* 10 minutes Auto-off function can be activated or deactivated* Good key design,high sensitivity, greatly reducing the volume and weight of the tester.* Different models corresponding to different function, according to own use to choose .

Specifications:

PON module: FOT3213 FOT3213A FOT3213AV FOT3213AP

1310 upstreammeasurement

Pass Zone(nm) 1260nm～1360nmMeasurementRange(dBm) -40dBm～+10dBmOutput power(max) 15dBmIsolation@1490/1550(dB) >40dBBurst mode measurement error <±0.5dB1490 downstreammeasurementPass Zone(nm) 1470nm～1505nmMeasurementRange(dBm) -40dBm～+12dBmOutput power(max) 15dBmIsolation@1310/1550(dB) >40dB1550 downstreammeasurementPass Zone(nm) 1535nm～1570nmMeasurementRange(dBm) -40dBm～+20dBmOutput power(max) 25dBm

Isolation@（1310/1490nm） >40dB

- 15 -

Measurement AccuracyConnatural uncertainty(dB) ±0.5dBLinearity(dB) ±0.1dBPassing through insertionLoss(dB)

<1.5dB

General InformationDetector Type InGaAsOptical Connector FC/SC/ST Interchangeable/2.5 universal adapterFiber Type SM 9/125umMeasurement Unit dB/dBm/xWResolution (dB) 0.01dB

Operation Voltage(V) DC 3.3V～5.5VPower Supply 3pc1.5V batteryContinuously Operation time (h) PON：

90hPON：90hOPM：100hVFL：50h

PON：90hVFL：50h

PON：90hOPM：100h

Operation Temperature(℃) -10℃～60℃Storage temperature(℃) -25℃～70℃Weight(kg) 423g 425g 424g 424g

Note: The operation time of the battery are all for the instrument that do not turn on back light, if the back light turn onthe operation time will be shorted.

Normal Optical Power Meter Module：Normal Optical PowerMeter

FOT3213② FOT3213A FOT3213AP

Measurement AccuracyConnaturaluncertainty(dB)

None ±0.5dB

Linearity(dB) ±0.1dBMeasurementRange(dBm)

-70dBm～+6dBm

General InformationMeasurement Unit None dB/dBmResolution (dB) 0.01dBCalibrationWavelength(nm)

1300/1310/1490/1550/1625

850/1300/1310/ 1490/1550/1625

Detector Type InGaAsOptical Connector FC/SC/ST Interchangeable/2.5 universal adapter

②：FOT3213do not have the OPMmodule

- 16 -

VFL Module：VFL FOT3213○③ FOT3213A FOT3213AV

Output power None >0.5mWWavelength 650nmOptical Connector FC/SC/STInterchangeable/2.5 universal adapterFiber Type SM/MM

③：FOT3213 without VFL module.

Standard Packages:

Model 3213 Series PON Optical Power Meter

Items Title Quantity1 FOT3213 tester 1unit2 User Manual 1pc3 USB 1pc4 Soft CD 1pc5 1.5VAA Battery 3pc

- 17 -

FOT3214 Optical Power Meter

FOT3214 , hand held and self-calibrated optical power meter is designed for the installation, operation and maintenance of afiber-optic network.It is a precise, durable and convenient portable test instrument. With a smart appearance, optionalbacklight display, auto-off function, wide optical power test range, accurate testing accuracy and a new self-calibrationfunction and universal user interface design.

FeaturesNew user self-calibration functionExtraordinary battery lifeUnique universal interface designFast response,no warm-upThe optional automatic shutdownFC/SC/ST and other common interface, without complicated conversionLinear(mW) and Nonlinear(dBm) at the same time indicationUsing a common AA batteries for up to 240 hours of continuous working timeoptional background light display switch

Specification

Model FOT3214A FOT3214CWavelength（nm） 800～1700Detector InGaAsMeasurement Range（dBm） -70～+6 -50～+26Uncertainty ±5%Calibrated Wavelength（nm） 850、980、1300、1310、1490、1550Resolution linearity：0.1% /0.01dBmWorking Temperature（℃） -10～+60Storage Temperature（℃） -25～+70Auto-off（min） 10

Battery operation time（h） 240Dimension（mm） 175×82×33

Power supply 3 pcs of AA 1.5V batteryWeight（g） 310

- 18 -

CWDM Power Meter----------FOT3226 Series

FOT3226 CWDM Power Meter is a handy measuring which is specially designed for CWDM system, covers wavelength from1470-1610nm. It can measure and monitor optical power and attenuation value at the calibrated wavelengths of 1470, 1490,1510, 1530, 1550, 1570, 1590, 1610nm . Testing at all calibrated wavelengths will be performed simultaneously and alltesting results will be showed in the LCD display. FOT3226 CWDM power meter features simple operation and quick response,which greatly improves the testing efficiency. Its high accuracy measurement and easy-to-use design becomes an ideal testerin CWDM system testing and CWDM installation and maintenance.

Key Features

CWDM System testing special purpose.Test at all calibrated wavelength performed & showed simultaneously500 items storage & upload by USB .

Specification

Model FOT3226 CWDM Power meterPass band(nm) 20Wavelength range(nm) 1470-1610Calibrated wavelength(nm) 1470, 1490, 1510, 1530, 1550, 1570, 1590, 1610Optical Power Range(dBm) -50-+3Uncertainty(dB) ±0.4Resolution 0.01Data Storage 500 setsCommunication Port USBAuto Power-off (min) 10 minutesPower supply adaptor 8.4VOperation temperature -10~60°COperation Time 120 hoursStorage temperature -25~70°CPacking & Delivery:G.W. 420gPacking sizes 180mm(L)*90mm(W)*36.5mm(H)

- 19 -

CATV Power Meter----------FOT3227 Series

FOT3227 is a hand held optical power meter and RF detector designed for installation, operation and maintenance of opticalfiber communication network. This product has a neat appearance, switch selectable backlit display, automatic shutdownfunction, super wide optical power test range, accurate testing accuracy. Through investigation CATV fiber link optical powerand RF carrier signal the presence or absence can be quickly and easily help construction, to quickly identify the type of fault.

FeaturesDirect detection signal with or without in the CATV optical link.Integrated optical power meter.

Specification

Model FOT3227Wavelength range(nm) 800-1700Detector type InGaAsCalibrated wavelength(nm) 850, 1300, 1310,1490, 1550,1625Optical Power Range(dBm) -70~3Uncertainty(dB) ±5%Resolution 0.01CATV RF Frequency ID(Hz) 40~900MhzAuto Power-off (min) 10 minutesOperation temperature -10~60°COperation Time 140 hoursStorage temperature -25~70°CG.W. 320g(without battery)Packing sizes 185mm(L)*84mm(W)*48mm(H)

- 20 -

Plastic Power Meter----------FOT3233 Series

FOT3233 hand-held POF power meter can be used for testing plastic optical fiber within 600-1000nm wavelength range inunit of w, dBm . With high resolution display . It has 635nm, 650nm, 780nm, 850nm, 980nm wavelength five calibrationpoints .It can display power in linearity or non-linearity, can be used to short-wavelength optical power measurements.

Features-Suitable for single-mode, multimode, plastic or large core fiber;- 2 buttons to control all the necessary functions- A large area silicon detectors- Multiple Wavelength Calibration

Specification

Model FOT3233A FOT3233CWavelength（nm） 600～1000Detector 3.6*3.6 large area of Si detectorMeasurement Range（dBm） +10~-70 +26~-50Connector Φ3.8 universal、Φ2.5 universal、FC/SCUncertainty ±5%Linearity(dB) 0.1%Calibrated Wavelength（nm） 635，650，780，850，980Logarithm 0.01dBmResolution 0.05Working Temperature（℃） -10～+40Storage Temperature（℃） -25～+70Auto-off（min） 10Battery Operating Time（h） 60Dimension（mm） 150X74X26Power Supply 3 pcs of AAA 1.5V batteryWeight（g） 200

- 21 -

FOT3223 VFL&OPM

Features* Power meter and VFL integrated in one unit, this tester allows to perform bothoptical power/loss measurements and Fiber faults tracing visually.* OPEM3223 VFL Power Meter is an ideal tester used in quickly mechanicalsplicing and FTTx networks.* Optical Port: FC, SC interchangeable supports various optical connectors.

SpecificationsModel FOT3223

Operating wavelength(PowerMeter Module)

1310， 1490， 1550， 850， 1300， 1625

Detector Type InGaAs

Out put power(VFL module) 1mW or 10mW

Power Measurement Range -70~+3dBm / -50~+26dBm

Uncertainty ±0.5dB

Resolution 0.01

Operation temperature -10~+60℃

Storage Temperature -25~+70℃

Auto-off function Yes, Auto-off after 10minutes idle time

Battery Life @ OPM 180 hours

Battery Life @ VFL 60 hours

Power Supply 3pcs AA Batteries

Weight 700g (including batteries)

Size 192*102*50

Standard PackagesMODEL INCLUDESAll FOT3223 Models VFL Power Meter, 3pcs alkaline batteries, User Manualand Soft carrying

case.

With FC, SC,

interchangeable

adaptor

- 22 -

Hand held Adjustable Light Source---------FOT3116 Series

FOT3116 Hand held Adjustable Light Source is FOT newly designed fiber optic tester, it aims at fiber network installation, fibernetwork engineering acceptance and fiber network maintenance. Combined usage with FOT3216 hand held optical powermeter, it offers a quick and accurate testing solution on both SM andMM fibers. The FOT3116 provides 1 to 4 wavelengthsand output power can be adjustable on customer requests. Also the FOT3116 features good appearance, good touch feelingand considerate humanity design.

Features* Wave ID information can be transmitted when used with FOT3216 Optical Power Meter.* Tone generation, 270HZ,330HZ,1KHZ,2KHZ* Output power can be adjustable* Output power value is shown on LCD display* Intelligent back light control (light intensity can be adjusted properly according to ambientlight, which greatly reduced power consumption)

* AA alkaline and AC adapter for power supply* Low battery indication

SpecificationsModel FOT3116

Operating wavelength（nm） 1310/1550;1310/1490/1550/1625（others specify on requests）

Applicable fiber SM，MM

Laser type FP-LD(others specify on requests)

Output Power（dBm） -5~-12dBm（can be adjustable）

Adjustable step size（dBm）＜0.5

Stability(dB，30min，20℃) 0.15

Modulation（Hz） CW， 270，330，1K，2K

Fiber Port FC/PC

Alkaline Battery 3*AA，1.5V

Power Supply Adaptor(V) 8.4

Battery Operating time(h) 45

Operation Temperature(℃) -10～+60

Storage Temperature(℃) -25～+70

Outline size（mm）/weight 180*90*45(250g)

Standard PackageMODEL INCLUDES

All FOT3116 Models FOT3116 Optical Light Source, 3pcs 1.5V batteries, AC Adaptor, User Manual andSoft carrying case.

- 23 -

Optical Light Source---------FOT3111 Series

FOT3111 optical light source is a handheld optical light source, newly released in 2007. It can provide 1 to 5 wavelengthsoutput to satisfy specific requirements including the 650nm visible light source and the 1310/1550nm wavelengths for singlemode fiber or the 850/1300nm wavelengths for multimode fiber, as well as other wavelengths according to customer’s needs.Together with the FOT3211 optical power meter, it is a perfect solution for fiber optic network applications.

Features* Provides 1~5 wavelengths output which can be optional according tocustomers’ needs* CW, 2Hz modulation output at 650nm, and CW, 270Hz,1KHz,2KHzmodulation output at other wavelengths.* High stability of the output power* Stable output wavelength* Backlight LCD display supports night operation* Low battery power indication

ApplicationsMaintenance in TelecomMaintenance CATVFiber Optic Lab TestingOther Fiber Optic MeasurementsSpecificationsType FOT3111

Wavelengths(nm) Provides 1~6 Wavelengths according to needs.

Emitter Type FP-LD,LED

Typical OutputPower(dBm)

0@650nm / -7 @1310nm,1550nm, -20dBm for LED

Spectral Width(nm) ≤10

Output Stability ±0.05dB/15mins; ±0.1dB/ 8hours

Modulation Frequencies CW.2Hz@650nm / CW,270Hz,1KHz,2KHz@1310nm,1550nmCW,270Hz,1KHz,2KHzOptical Connector FC/PC(Other type adapters can be required)

Power Supply Alkaline Battery(3 AA 1.5V batteries); AC Adaptor(9V)

Battery OperatingTime(hour)

45

OperatingTemperature(℃)

-10~+60

Storage Temperature(℃) -25~+70


Weight(g) 370

FOT Recommendation

FOT3111 Handheld Light Source is designed for optimal use with FOT3211 Optical Power Meter formeasuring optical loss on both single mode and multimode fiber cable.

Standard PackageMODEL INCLUDESAll FOT3111 Models FOT3111 Optical Light Source, 3pcs 1.5V batteries, AC Adaptor, User Manual and

Soft carrying case.

mailto:CW.2Hz@650nm

- 24 -

CWDM Light Source---------FOT3122 Series

FOT3122 is the FOT Company-launched hand-held light source. It’s specially used in CWDM system. FOT3122 has thecorresponding wavelengths for CWDM system, such as 1290 nm、1310 nm、1330 nm、1350 nm、1370 nm、1390 nm、1410nm、1430 nm、1450 nm、1470nm、1490nm、1510nm、1530nm、1550nm、1570nm、1590nm、1610nm. It can output severalwavelengths at the same time. And also it has the functions of wavelength recognition and online upgrade for convenientextension. This product is easy to operate and has practical functions. It’s widely used for the testing and maintenance of theCWDM system.

Features

It can output up to eight wavelength simultaneouslyWork modes are multiple and optional. It can be applied in different

environmentswavelength recognition functionThe output power of all the channels is adjustable by 0.01dBm steppingThe product is easy to be upgraded and updated through Online upgrade

systemEasy interface and simple to operate

Specifications

Model FOT3122Spectral width（nm） 20Calibration wavelength （nm） 1290、1310、1330、1350、1370、1390、1410、1430 or 1450、

1470、1490、1510、1530、1550、1570、1590Applicable fiber type SM,MMModulation frequency （Hz） CW,270，330，1K,2KConnector type (FC/SC/ST)PCPower output range （dBm） -8~-18Output regulation stepping （dB） 0.01Output stability（dB）Note① <0.1Inherent uncertainty（dB） 5%Display resolution（dB） 0.01Work temperature（℃） -10~+60Storage temperature（℃） -25~+70Auto-off time（min） 10Battery operating time（h）Note② 120Power supply 3 AA batteriesDimensions（mm） 180*90*36.5weight（g，without battery and jacket） 420

- 25 -


FOT3109 optical light source can provide 1 to 4 output wavelengths to meet specific requirements, including the 650nm redsource and the 1310/1550nm wavelengths for single mode fiber or the 850/1300nm wavelengths for multimode fiber, as wellas other wavelengths according to customer needs. Together with the FOT3208 optical power meter, it is a perfect solutionfor the fiber optic network characterization.

Features* Provides 1~4 output wavelengths which can be optional according to customer’s needs* CW, 2Hz modulation output at 650nm, and CW, 270Hz,1KHz,2KHzmodulation output at other wavelengths.* High stability of the output power* Stable output wavelength* Backlight LCD display supports night operation* Compact size and decent appearance* Large LCD, easy operation* Alternative 10 minutes Auto-off function conserving battery life

SpecificationsType FOT3109

Wavelengths(nm) 650 1310/1550

850/1300 850/1300/1310/1550

Emitter Type FP-LD,LED or others please specify

Typical Output Power (dBm) 0 -7dBm for LD, -20dBm for LED



Modulation Frequencies CW,2Hz CW,270Hz,1KHz,2KHz

Optical Connector FC/ universaladaptor

FC/PC

Power Supply Alkaline Battery(3 AA 1.5V batteries)

Battery Operating Time(hour) 45

Operating Temperature(℃) -10~+60


Dimension(mm) 175x82x33

Weight (g) 295

FOT Recommendation

FOT3109 Handheld Light Source is designed for optimal use with FOT3208 Optical Power Meter for measuringoptical loss on both single mode and multimode fiber cable.

Standard PackagesMODEL INCLUDESAll FOT3109 Models FOT3109 Optical Light Source, Protective Rubber Boot, 3pcs 1.5V batteries,User Manual,

and Soft carrying case.

- 26 -


FOT3110 Mini optical light source Is the most rugged small size instrument in the industry. It integrates super small size andstrong function in one unit. With 3 pieces of 1.5V alkaline batteries, it can work continuously for more than 40 hours. Thetotal weight is only 110g. Together with the FOT3205 Mini optical power meter, it provides an excellent solution for fiberoptic network and for field work.

Features* High stability of the output power* Economic type, easy to use* Matched with the FOT3205 mini power meter,it constitutes the smallest optical loss test kit, perfect for field testing


Specifications

Type FOT3110

Wavelengths(nm) 1310 or 1550

Emitter Type FP-LD

Output Power(dBm) -7~-6



Optical Connector FC/PC

Power Supply 3pcs 1.5V alkaline batteries

Battery operating time(hour) 40

Operating Temperature(℃) -10~+60



Weight (g) 110

FOT Recommendation

FOT3110 Handheld Light Source is designed for mini portfolio with FOT3205 Optical Power Meter formeasuring optical loss on both single mode and multi mode fiber cable.

Standard PackagesMODEL INCLUDESAll FOT3110 Models FOT3110 Optical Light Source, Alkaline battery, User Manual and

Protective Holster.

- 27 -

Pen-type Visual Fault Locator (VFL)---------FOT3105P

The FOT3105 Pen-type VFL is specially designed for field personnel who need an efficient and economical tool for fiber tracing,fiber routing and continuity checking in optical network. It includes:Finding the break point, poor connections, bending or cracking in fiber optic cables.Finding the faults of OTDR dead zoneEnd-to-end visual fiber identification

Features* 2.5mm universal connector, for 1.25mm connectorsFC (Male)-LC (Female) convertor can be provided on requests.* Operates either in CW or Pulsed* Constant output power* Lower Battery warning* Long battery life (up to 60 hours)* Crash-proof and dust-proof design for laser head* Laser case ground design prevents ESD damage* Burning testing to ensure the reliability.* Portable and rugged, easy to use* Guarantee to CE standards include EMC, EMI, ROHS

SpecificationsType FOT3105 Pen-type Visual Fault Finder

Central Wavelength 650nm±10nm (635nm can be required on request)Emitter Type FP-LDOutput Power Optional choice for 1mw, 10mw on actual needsOptical Connector 2.5mm universal connector

For 1.25mm connectors, FC (Male)-LC (Female) convertorcan be optional on customer requests

Operating Model Both CW and Pulse availablePulse Frequency 2~3HzPower Supply 2 AA alkaline batteriesBattery OperatingTime

650nm@1mw ≥65hour650nm@10mw≥15hourTest with Panasonic LR6 AA ALKALINE battery

Operating -10~+45 (℃)Storage Temperature -40~+70 (℃)Dimension (mm) ￠15X180Weight 120g(Without battery)Remark: Colors can be customized on request when meets certain qty!

Standard PackagesMODEL INCLUDESFOT3105 P Main Unit (Original color), 2pcs Alkaline battery, User Manual, and Soft Carrying case.

- 28 -

Economical Visual Fault Locator (VFL) ---------FOT3105N

The FOT3105N Economical VFL is an efficient and low cost basic fiber test tool, it provides a visible way to find fiber faults andidentify fibers in an optical network during and after installation. It includes:Finding the breakpoint, poor connections, bending or cracking in fiber optic cables.Finding the faults of OTDR dead zoneEnd-to-end visual fiber identification

Features* Constant & stable output power* Special laser driver circuit design, to make sure the laser output power remains aconstant power level as long as in an available battery voltage.* Low battery warning, reminds users to change the battery timely.* Long battery life(up to 40 hours with AAA batteries)* Operates either in CW or Pulsed* Pocket size and light weight, easy to use

SpecificationsType FOT3105N Economical VFL

Central Wavelength 650nm±10nmEmitter Type FP-LDOutput Power 1mw or 10mwOptical Connector FC/2.5mm universal connector

For 1.25mm connectors, FC (Male)-LC (Female) convertorcan be optional on customer requests

Operating Model Both CW and Pulse(2Hz) availablePower Supply Two AAA alkaline batteriesBattery OperatingTime

40hoursTest with Panasonic LR6 AAA ALKALINE battery

Operating -10~+60 (℃)Storage Temperature -25~+70 (℃)Dimension (mm) 100*30*18Weight 37g

Standard PackagesMODEL INCLUDESFOT3105N FOT3105N VFL, Two AAA batteries, User Manualand Soft Carrying case.

- 29 -

Optical Multi-meter---------FOT3210 Series

FOT3210 is an high availability, highly cost-effective optical multimeter. It’s the integration of power meter and light source,user can operate the two function together or separately, which improves his work efficiency greatly. Moreover, FOT3210 iswidely used in the fiber-optic line project construction, testing and maintenance, such as digital data network,telecommunication network and cable television.

Features* Great LED display,easy to operate* Automatic switching function of the internal source wavelength* Detection of the frequency light* Power measurement in dBm and mw* Wide-range detection zone* Battery indication

Specification

Instrument model/ parameters FOT3210A FOT3210CPower meterCalibration wavelength(nm) 850、1300、 1310、1490、1550、1625(Wavelength is optional)

Testing range(dBm) -70～+6 -50～+26Display resolution(dB) 0.01Uncertainty(dB) ≤±0.25linearity(dB) ≤±0.1Connector type FC(Optional)Light SourceWorking wavelengh（nm） 1310/1550（±20）(customizable)Typical Output Power(dBm) -5(customizable)Stability（dB,30min,20℃） ≤0.1dBConnector type FC/PC(customizable)Modulation frequency (Hz) CW,270Hz，1KHz，2KHzOther partsPower supply 3*AA 1.5V battery / Mini USB 5V adapterAuto-off time (min) 10Battery continuous operationtime②)(h)

Source ON≥50,source off≥200

Working temperature（℃） -10～+60Storage temperature（℃） -25～+70Size(mm) 171×73×26Weight(g，not including battery) 175

- 30 -

Optical Multi-meter---------FOT3209 Series

FOT3209 Hand held Optical Multi-meter Integrates the functions of an intelligent optical power meter module and of a highlystable light source module in one unit. It can also provide data storage and upload functions. It is widely used ininstallation ,measurement and maintenance of DDN, Telecom and CATV networks.Features* Users could write their own software by the communication protocol provided* Automatic wavelength of light source switching* Frequency identification.* Simple function mode switching* High stability of the output power* Data storage function, up to 1000 test records* USB communication port for saved testing records download* Alkaline Battery and Mini USB Adapter for power supplyApplicationsTelecomMaintenanceCATV MaintenanceDDNMaintenanceFiber Optic lab testingOther Fiber Optic MeasurementsSpecificationsType FOT3209A FOT3209COptical Power Meter ModuleDetector Type InGaAsMeasurement Range(dBm) -70~+6 -50~+26Rosolution(dB) 0.01Uncertainty ≤±0.25linearity (dB) ≤±0.1Frequency ID Range（Hz）＜10KOptical Light Source ModuleWavelengths(nm) 1310/1550(other wavelengths can be optional)Typical Ouput Power(dBm) -5Output Stability ≤0.1Modulation Frequencies(Hz) CW,270,1K,2KGeneral Specifications of Multi MeterPower Supply 3 pcs 1.5V Alkaline Batteries/Mini USB 5V AdapterBattery Operating Time(h) ≥50 (Both Power Meter and Light Source are working)

≥200(Only Power Meter is working)Auto-off time (min) 10Communication Port Mini USBOperating Temperature(℃) -10~+60Storage Temperature(℃) -25~+70Dimension(mm) 175X90X44.5Weight (g,without batteries) 265

Standard PackagesMODEL INCLUDESFOT3209 Multimeter, Mini USB cable,5V USB Adapter,3pcs 1.5V Alkaline Batteries,CD,User Manual,

Cotton swabs and Soft carrying case.

- 31 -

Optical Fiber Ranger ---------FOT3304A

FOT3304A Fiber Ranger is newly designed fiber optic tester, it aims at fiber fiber network installation,fiber networkengineering acceptance and fiber network maintenance. It can detect fiber fault location more accurate and quick, anddesigned for field use.FOT 3304A fiber ranger is an economical tester instead of OTDR in the test and maintenance of fibernetwork.

Main Features* Easy to identify the faults location* Analysis reflection events and attenuation events automatically* Build-in visual fault locator function* Automatic Pulse Width Control design to ensure a convenient operation.* Up to 2500 measurement results can be stored in the unit.

Specifications

Model FOT3304AOperating Wavelength 1550 ± 20

Fiber Type 9/125 umOptical Connector Type FC/PCDetector Type InGaAs APDPulse Width Auto adjustment

Max.Distance（km）① 60Distance Accuracy（Reflection Event）(m)②

±（3m + 2*10^-4 * distance）

Reflection Event Dead Zone(m)③ 15mPower Supply AA,3pcsBattery Operating Time > 2500Auto Power-off time (min)④ 10VFL output power(mW) > 1 mWData Storage Capacity⑤ 2000

Working Temperature(℃) -5 ~ 40

Storage Temperature(℃) -10 ~ 70Dimensions(mm) 175*90*44.5Weight(g)⑥ 278


All Models FOT3304A Fiber Ranger, 3pcs 1.5V batteries, User Manual,USB,CD,Cotton swabs

- 32 -

Optical Fiber Identifier---------FOT3306B Series

FOT3306B Optical Fiber Identifier can quickly identify the direction of transmitted fiber and display the relative core powerwithout any damages to the bended fiber. When the traffic is present,the intermittently audible tone is activated.The FOT3306B optical fiber identifier also recognize the modulation like,270Hz,1kHz and 2kHz .When they are used to detectthe frequency, the continuously audible tone is activated.There are four adapter heads available: Ø0.25, Ø0.9, Ø2.0 and Ø3.0.The FOT3306B optical fiber identifier is powered by a 9V alkaline battery .Features* Easy-to-use with “ONE KEY” operation.* Lower power indication* Displays the relative core power* More accurate test with Sunshade* Easy-to-replace adaptors* Durable metal housing and quality construction* Efficiently identifies the traffic direction and frequency tone (270Hz, 1KHz, 2KHz) withaudible warning.Specifications

Standard PackagesMODEL INCLUDESFOT3306B FOT3306B Optical Fiber Identifier, 4pcs adapter heads, Sunshade, Alkaline battery,

User Manual, Cotton Stick and Soft Carrying case.

Type FOT3306B

Identified Wavelength Range 800-1700 nm

Identified Signal Type CW, 270Hz±5%，1kHz±5%，2kHz±5%

Detector Type Ø1mm InGaAs 2pcs

Adapter Type Ø0.25 (Applicable for Bare Fiber)，Ø0.9 (Applicable for Ø0.9 Cable )

Ø2.0 (Applicable for Ø2.0 Cable ), Ø3.0 (Applicable for Ø3.0 Cable )

Signal Direction Left & Right LED

Singe Direction Test Range(dBm, CW/0.9mm bare fiber)

-46~10(1310nm)

-50~10(1550nm)

Signal Power Test Range(dBm, CW/0.9mm bare fiber)

-50~+10

Signal Frequency Display (Hz) 270, 1k, 2k

Frequency Test Range(dBm, Average Value)

Ø0.9, Ø2.0, Ø3.0 -30~0 (270Hz,1KHz)

-25~0 (2KHz)

Ø0.25-25~0 (1KHz,2KHz)

-20~0 (2KHz)Insertion Loss(dB, Typical Value) 0.8 (1310nm)

2.5 (1550nm)

Alkaline Battery(V) 9

Operating Temperature(℃) -10－+60

Storage Temperature(℃) -25－+70

Dimension (mm) 196X30.5X27

Weight (g) 200

- 33 -

Optical Fiber Identifier---------FOT3306D Series

FOT3306D Optical Fiber Identifier is an essential tool in fiber maintenance. It can identifier fiber without any damage ,can detect anywhere in the single-mode and multimode fiber. Meanwhile, the identification device is also integrated with VFL.It is the ideal equipment for continuous fiber online tests.

Features;

--Online testing ,no need to stop traffic--Integrated wit VFL--Efficiently identify direction of fiber signal output and modulationfrequency

Specification:

Model FOT3306DWavelength range (nm) 800 ~ 1700Applicable Fiber 3.0, 2.0, 0.9Frequency (Hz) 270,1K, 2KFrequency range >-20dBmIdentify the direction >-30dBmVFLWavelength 650nmOutput power 1mw (10mW optional)Connector FC/PCPower supply 2 * AA 1.5V battery

Standard PackagesMODEL INCLUDESFOT3306D FOT3306D Optical Fiber Identifier,3pcs adapter heads, Sunshade, Alkaline battery,

User Manual, Cotton Stick and Soft Carrying case.

- 34 -

FTTH Terminal Tester---------FOT3228 Series

FOT3228 FTTH tester is a specially designed for portable instruments for FTTH terminal installation and maintenance , It canquickly and easily detect optical fiber terminal optical fiber condition, With universal interface design and multi-interfaceoption so that products can be applied to detect a variety of environments.

Key Features:

Easy test of fiber optical traffic status-Judge the traffic status:Normal,Failure or IdleFind out upload and download traffic problem- Optical signal quality evaluationUniversal 2.5mm connector-small sized and portable

SpecificationModel FOT3228Wavelength 1310nm 1490nm 1550nmRange(dBm) -30 -- +10 -30 -- +10 -30 -- +20Band pass 1310±50 1490±10 15500±10Insert Loss(dB) ≤ 2Connector Universal 2.5mm,FC/SC/ST optionalPower 2*AAA 1.5V batteryWorking Time ≥40 hoursWorking Temperature -10℃ ~ 60℃Storage Temperature -25℃ ~ 70℃Weight 110g without batteryDimension 121×69×25mm

- 35 -

Optical Talk Sets----------FOT4103N

FOT4103N Optical Talk Set is an intelligent and efficient instrument that combines in one set the functions of both a digitaloptical phone and a stabilized light source. It is widely used in operations of installation, optical testing, maintenance andfiber attenuation value testing in data network, CATV and Telecommunication network. The FOT4103N Talk Set can carry outfull-duplex communication with high quality connection and not be affected by distance.

Features* Full-duplex digital communication with high quality conversationconnection and low background noise* Together with Optical Clip-on Coupler, enables on line communicationsavailable* Combining functions of both a digital optical phone call and a stabilizedlight source.* Large LCD display with backlight* Low battery power indicationApplicationsMaintenance in TelecomMaintenance CATVFiber Optic Lab TestingOther Fiber Optic MeasurementsSpecificationsType FOT4103NWavelength(nm) 1310/1550

Emitter Type FP-LD

Transmission Distance(KM) ≥100

Dynamic Range(dB) ≥ 33

Output Power(dB) -5~-7

Modulation(Hz) CW,270,1K,2K

Output Stability(dB,30min,20 °C )

≤ 0.1

Power Supply 3 pcs 1.5V Alkaline Batteries/8.4V Power Supply Adaptor

Battery Operating Time 5 hours

Optical Connector FC/PC

Operating Temperature(°C) -10 ~ +60

Storage Temperature(°C) -25 ~ +70


Weight(g) 310

Remark: FOT also provides Fiber Optic Clipon Coupler device according to customers needs

Standard PackagesMODEL INCLUDESFOT4103N Optical Talk Set (pair), Headset, 3 pcs 1.5V Alkaline Batteries, 8.4V Power

Supply Adaptor, User Manual, Cotton swabs and soft carrying case.

- 36 -

Optical Variable Attenuator ---------FOT3303

FOT3303 handhold optical variable attenuator is used for continuously variable optical signal attenuation. As the attenuator isused in the laser system for the on-line testing, therefore, FOT3303 can be used in the digital system of communicationdevices (such as: PHD, SDH) and also in the system of adopting analog modulation (CATV)Main Features* stepwise attenuating by circumgyrated dial: attenuating step 0.05dB* Provide with the function of displaying dB and dBm attenuating value* 10 minutes Auto-off function can be activate and deactivate with keypad operation.* After off the instruments, the system will have the memorizing of the attenuating value andthe attenuating step, in order to restore the system back to the previous shut down statewhen open the instruments next time* Portable, rugged, lightweight; Easy to use.ApplicationsTelecomMaintenance,CATV MaintenanceComprehensive cable construction systemOptical instruments research and development,education and lab testingSpecificationsType FOT3303Attenuating wavelength Range 1260~1650nmFiber Model 9/125um SMOptical Connector FC/PC

Calibrated wavelengths 1310/1490/1550/1625nmMeasurement Range 2~60dBResolution 0.05dBMinimize Insertion Loss ＜2.0dBLinearity ±0.5dBRepeating ±0.2dB

Attenuating Accuracy ±0.8dBReturn Loss at Input/ Output ＞35dB（typical value40dB）Max input ＋20dBmDisplaying type lattice 128*64 black and white, white back ground lightRechargeable batteries 8.4VPower supply adaptor 8.4V

Operation temperature 0~40℃Operation Time 40 hoursStorage temperature -10~60℃humidity 0~85%（non- condensation）Dimensions 180X90X36.5Weight 427g


FOT3303 FOT3303 Main Body, Protective Rubber Boot, Rechargeablebattery, Power Supply Adaptor, Instruction Manual and CottonSwabs and Rigid hard carrying case.

- 37 -

Optical Return Loss Tester-----FOT3308

FOT3308 hand held return loss tester is used to measure the return loss in the field fiber optic linking, in order to adjust thequality of the optic fiber end-face, and to make sure the fiber optic communication is in good condition. This FOT3308 handheld return loss tester can realize measurement of Return Loss, Insertion Loss, Output power, and also can be used as thelaser source. Moreover, it has the data storage function of 500 measurement items.

FeaturesA variety of functional test pattern (RL.IL.OPM.OLS)The test data uploading is stored.Support USB power supply function.Interface simple, easy to operate.

Specification

Model FOT3308Return Loss TestingWavelength(nm) 1310/1550Plus Width(nm) <5Displaying range(dB) -70~+0Accuracy(dB) ±0.5Optical Connector FC/APCResolution(dB) 0.01Power MeterWavelength(nm) 800~1700Calibrated wavelength(nm) 850, 1300, 1310, 1490, 1550, 1625Connatural uncertainty(dB) ±0.25Displaying Range(dBm) -70 ~+6Communication Port USBAlkaline battery 3*AA,1.5VDisplay LCDOperation Temperature(°C) -10~+60Storage Temperature(°C) -25~+70G.W. 380gPacking sizes 180mm(L)*90mm(W)*36.5mm(H)

- 38 -

Optical Fiber Cable Identifier-----FOT6208

FOT6208 is a tool,using acoustics,to locate and identify fiber cables which could buried in pipe, tunnels or hanged onoverhead poles.With user-friendly interface, this device is simple and practical, non-toxic, do not damage fiber optic cable tolocate and identify..

Features

-Adjustable sensitivity to adapt to a variety of detection range

- Maximum detection range of 60Km

- Real-time LCD display

- A variety of ways to accurately identify the fiber cable

- VFL integrated

- Remote testing of cable mechanical perturbations

- Audio or video cable positioning method

Specification

Model FOT6208Max Detection Distance 60KmOutput power of VFL >-3dBmFiber type SMConnector SC/APCOutput mode Vibration amplitude,pulse mode, soundPower supply DC-12VBattery RechargeableWorking temperature 0~45℃Storage temperature -20~60℃Dimension 100*200*30mmWeight 860g

- 39 -

Digital/Analog Signal Lever Tester-----FOT1703

FOT1703 Digital/Analog signal level tester,by adapting high-speed micro processor, is an essential equipment for CATCinstallation and maintenance. It has accurate detection and analysis of QAM performance indicators - average power, MER,BER, constellation.

Features:

1.Supporting multiple DVB mode: 16QAM, 32QAM, 64QAM, 128QAM, 256QAM.

2. Wide rate setting: 1MS / S-9MS / S.

3. QPSK COFDM power detection.

4. The spectrum analysis function can truly reflect the actual spectrum channels.

5. Automatic analog and digital channels to create a function for detecting anynetwork.

6. The comprehensive analog TV indexes detection - level, V / A, C / N, slope,automatic detection.

7. High-definition, wide temperature four gray FSTN LCD display, has a good visualeffect.

8. The fast charge, long continuous working time is more than five hours, for a variety of measurement needs.

9. The reverse return signal measurements.

10. A key to restore factory settings

Specification

Model FOT1703

Digital DVB Testing

Frequency Range 46MHz~870MHzModulation Mode DVB-C/ITU-T J.83-Annex ADVBMode 16QAM, 32QAM, 64QAM,

128QAM,256QAMSpectrum scanning broadband 2.5MHz,6.25MHz,12.5MHz,25MHz,62.5

MHzChannel scan Upto 100 channelDigital average power 30dB uV~110dB uVaccuracy 2.5dBBroadband User settingSymbol rate 1MS/S~7MS/SModulation error rate MER 20dB~39dB

- 40 -

Accuracy -2dB~+2dBBit error rate R-S front 1E-3~1E-9

Analog TV Testing

Frequency Range 46MHzMHz~870MHzChannel Range 1CH~56CHAdded channels Z1~Z43Resolution 10KHzBroadband 280KHzLevel measurement range 25dBuV~120 dBuVLevel measurement accuracy -1.5dB+1.5dBResolution 0.1 dBRectification PeakInput Resistance 75Ω

C/NInput signal range >70dBuVAccuracy -2dBuV~+2dBuV(AC/DC)

Voltage MeasurementInput 0~80VAccuracy -2V~+2V

Power Supply

DC supply 7.2VAC supply AC220V/50Hz -10%~+10%Battery capacity 6 hours of continuous workCharging time Less than 8 hours

OtherWorking temperature -20℃~50℃Display 128x64 graphical wide temperature

range backlit LCD display

- 41 -

Underground Pipe and Cable Locator-----FOT7570 Series

FOT7570 Pipeline & Cable Locator consists of a Transmitter, a Receiver and Accessories, used in the undergroundpipeline&cable route accurate locating, the burying depth measuring, long distance tracing, and insulation fault pointdetecting. We adopted multi coil electromagnetism technology on the Pipeline & Cable Locator, enhanced the pipeline&cablelocation precision for the burying depth and the goal pipeline identification capability, also could accurately carry on tracingand location to the goal pipeline&cable in the pipeline&cable crowded complex region. So the Pipeline & Cable Locator iswidely used in the telecommunication, electric, water supply, natural gas, physical prospecting, petrochemical and cityconstruction etc.

Features

--Adopt the advanced signal processing technology and the latestintegrated circuit..--Detecting frequency Optional: 480Hz, 7.7KHz , 31KHz and 61KHz(active)and 50Hz(passive).--Fault Fining (FF) Mode:Detect and locate the insulate fault point ofpipeline and cable.--Find loading signal on the pipeline through stethoscope frommultitudinous pipelines.--Automatic control receive gain.--Automatic test insulation resistance and the residual voltage ofpipeline and alarm.

Specification of Transmitter

Injection method 480Hz、7.7KHz、31KHz、61KHz

Induction method 31KHz、61KHz

Clamping method 31KHz

Fault Finding

Output Voltage 0-400Vp-p adjust according to the insulation condition

Output wave shape sine wave

Power Supply 11.1VDC 4.4AH Li-battery

Maximum output power 10W

Specification of Receiver

Power loss <1WPower Supply 11.1VDC1.8AH Li-batteryMax. Detecting burying depth 4.5 metersTolerance of burying depth ±0.05H ±5cm

(“H” is pipeline burying depth)Tolerance of route for detecting ≤5cmEffective length under detecting(Injection method)

≥10Km

- 42 -

Effective length under detecting(Induction method)

≥3Km

Effective length under detecting(Clamping method)

≥6Km

Insulated fault detecting ≥2 MΩ

Packing listItem Name Quantity Note1 Transmitter 1 pc2 Receiver 1 pc3 Carrying case 1 pc4 User’s manual 1 pc5 Adapter 2 pc6 Earth Stick 1 pc7 Signal Output line 1 pc8 Inductive Clamp 1 pc Optional9 Stethoscope 1 pc Optional10 A-frame 1 pc Optional11 GPS 1 pc Optional12 Certificate 1 pc

- 43 -

Fiber connector click pen cleaner -----FOT6531 Series

The Click-Cleaner is an easy-to-use option for cleaning connectors in adapters. Simply insert the Push-Cleaner into an adapterand push until an audible “click” is heard. The Click-Cleaner uses the mechanical push action to advance an optical gradecleaning tape while the cleaning tip is rotated to ensure the fiber end-face is effectively, but gently, cleaned. There are morethan 800-cleans lifetime for each Click-Cleaner.The Click-Cleaner is a must-have for field technicians. Small enough to fit in ashirt pocket and a great addition to cleaning kits. Save your wrist – no more twist!

Features:* Cleans both APC and UPC connectors* Ergonomic, comfortable design with single action cleaning* Precise mechanical action delivers consistent cleaning results* Low cost per clean with over 800 cleanings in one unit* Effective on a variety of contaminates including dust and oils* Automatic advance ensures each clean is performed with freshcleaning tape* Compliant with EU/95/2002/EC Directive (RoHS)

Model:

SC-250-C For SC/FC/ST adapterLC-125-C For LC/MU adapter

- 44 -

Fiber connector Cassette cleaner -----FOT-CC100 Series

FOT-CC100 Fiber clean cassette is essential accessory to maintain and guarantee good quality of fiber optic connection. It isthe best non-alcohol cleaning method for various fiber optic terminations which is simply and swiftly used. Box tapereplacement is offered to make sure low cleaning cost .Suitable for connector such as SC 、FC、MU、 LC、ST、D4 、DIN etc.

FeatureSpecial non-alcohol superfine fiber .Friendly using efficient cleaningEasy to replace the tape no pollutionCleaning time 500+Level of cleaning is 100

Specification

Type FOT-CC100 Fiber Connector CleanerCleaning Times Over 500 times per reel

Cleaning Result -20 to -50 dB （Return Loss）Operating Temperature -10℃ to +50℃Weight 100 gOrdering InformationName Function description Quality

Standard Accessories

FOT5005 Fiber Cleaner Cleaning the fiber connector ferrule (internal reel tape isincluded)

1 Set

Optional Accessories

Reel Tape Replacement Reel Tape of FOT5005, can be sold with extracost

1pcs

- 45 -

Field Fiber connector Microscope -----FOT-H400 Series

FOT-H400 Field Fiber Microscope is a low cost and high quality fiber inspection tool which is available in 400X magnificationand the white LED light to provide coaxial illumination to connector end-faces. This is method of illumination productshigh-resolution detail of end-face scratches, defects and contamination.

Features :Available for inspecting fiber connector's ends1.Fit for single-mode and multimode, acceptable port: φ2.5mm andφ1.25mm;2.Magnification effect: 400 or 200 times;3.Power: AAA battery 2 pcs;4.White light, clearly Inspecting effect;5.Portability, widely used in outdoor constructions.

Packing List

Microscope 01 PC2.50 mm Ferrule Adapter 01 PC1.25 mm Ferrule Adapter 01PCpacking bag 01 PC

- 46 -

Optical Fiber Cleavers------FOT008 Series

The cleaver is a tool used for cleaving multiple and single stand optical fibers. This model is with an optional trash bin.

Specifications:

Applicable range Single Core silex-fiberCoating Diameter φ0.25mm ＆φ0.9mmFiber Diameter 125μmCleave Length 9~16mm(φ0.25) 10~16(φ0.9)

Dimension 59mm(W)*55mm(D)*49mm(H)Weight 255gCleaving Angle ≤0.5°Blade Life 12000 times

- 47 -

Optical Fiber Tool Kit------FOT5004 Series

This set of tool kits is especially used in the FTTx solution, combine the function of the in-door cable stripper, cleaver,cleaning, and testing. It is an perfect tool kits in the fiber optic maintenance.

NO. Tool Name Qty Usage

1 Fiber Optic stripper 1 Peeling the coat of the fiber

2 rubber-insulated fiber cable stripper 1 Peeling the coat of the cables

3 Alcohol Bump Bottle 1 storing alcohol

4 Cleaning Cotton Swabs 2 cleaning fiber

5 FOT3105P Visual Fault Locator 1 Visually checking breakpoints, poor connections,bending or cracking in fiber optic cables

6 FOT3208 optical power meter 1 Test the output power and fiber loss

7 Optical Fiber Cleaver 1 Cleave the fiber

8 Carrying Case 1 Containing the above tools

- 48 -


FOT5003 cable Inspection & maintenance tool kits composed of FOT3205 mini power meter, FOT3304N fiber ranger, fibercleaver and other optical tool kits. This set of tool kits can test the output power, Identify the long and short distance faultlocations, connect the cables and so on. FOT5003 is mini in size, convenience for carrying, quite popular used in the field ofoptical cable maintenance.

Packing List

No. Name Model No Set Usage1 Fiber Ranger FOT3304A 1 Identify the fault location for the

long and short distance2 Alcohol Bottle 5mL 1 storing alcohol

3 Mechanical splicing 1 For fast splicing of the fiber4 Optical Fiber Cleaver 1 Cleave the fiber5 Mini Power Meter FOT3205 1 Test the output power6 Hexangular wrench 1 Take apart or assemble the

splicing closure7 CFS－2 Fiber optic

stripper1 Strip the jacket or coated fiber

8 wire-cutter 1 Cut the strengthened cable core

9 Monkey Wrench 8” 1 Take apart or assemble thesplicing closure

10 Cutter 1 Strip the fiber （extra refillcutter）

11 Cross Screwdriver 1 Take apart or assemble thesplicing closure

12 Straight Screwdriver 1 Take apart or assemble thesplicing closure

13 User manual FOT5003 1 Instruction and maintenance for14 Carry Case FOT 1 Contain all above tools

- 49 -


FOT5001 Optical Cable Emergency Tool kits is composed of most of the essential tools, it is suitable for general usage duringthe fiber installation and maintenance of fiber networks.

No. Tool Name Qty Function1 Fiber Optic stripper(CFS-2) 1 Peeling the coat of the fiber2 Assembled sleeve wrench 1 Fixing splice closure/terminal box3 2M Tape Measures 1 Measuring the length of the fiber cable

4 Utility Knife 1 Accessorial tool for peeling the fiber cables5 Piano wire clamp 1 Nipping the strengthening core of the fiber cables6 Cross Fiber reamer 1 Peeling the fiber cables7 Nipper 1 Entwining the fiber cables8 Scissors 1 Snipping the fiber of the cable9 Pliers 1 Snipping the steel wire of the fiber cables

10 Acuate clamp 1 Accessorial tool for the splicing11 Mini Screwdriver 2 Fixing the screws12 Inner-hexagonal Wrench 1 Fixing the inner hexagonal screws13 Adjustable Spanner 1 Accessorial tool for the splicing14 Assembled Screwdriver 1 Loading and uploading the fiber optic splice closure15 Alcohol Pump Bottle 1 Cleaning the fiber

16 Mark Pen 1 Marking the fiber17 Flashlight 1 Lighting at night18 diagonal cutting pliers 1 Accessorial tool for peeling the fiber cables19 Voltage test pen 1 Testing the security of the electrical source and electrical

wire20 Loose skinning pliers 1 Peeling the loose of the fiber cables21 Cleaning Air Ball 1 Blow off dust

22 Carrying Case 1 Containing the above tools

FOT Catalog 2016

Documents

Transcript of FOT Catalog 2016