For and ,Please Con˜gure Online. Oil Free Bushings10 12 15 20 16 16 12 +0.050 +0.032 10 12 15 20 25...
1
-343 1 -344 1 Oil Free Bushings Copper Alloy, Oil Groove / Flanged, Standard / Thin Wall Q Flanged, Standard / Thin Wall Oil Free Bushings Copper Alloy, Thrust Part Number - L MPBAZ10 MPFZ20 MPFZU12 - - - 15 30 15 QOil Groove Part Number L MPFZ MPFZU Housing Dia. (Recommended Dimension) MPFZ MPFZU Type dE7 Dr6 Thickness (N) H 0 t-0.1 Dr6 Thickness (N) H 0 t-0.1 Reference Dimension Tolerance (H7) Reference Dimension Tolerance (H7) MPFZ MPFZU *L dimensions in ( ) are available for MPFZ only. 5 +0.032 +0.020 10 12 9 +0.028 +0.019 2 14 2 7 +0.028 +0.019 1 11 2 9 +0.015 0 7 +0.015 0 6 10 12 15 10 16 8 12 10 8 8 +0.040 +0.025 10 12 15 20 12 +0.034 +0.023 20 10 14 12 +0.018 0 10 10 10 12 15 20 (25) (30) 14 22 12 +0.034 +0.023 16 14 12 +0.018 0 12 +0.050 +0.032 10 12 15 20 25 30 18 3 25 3 15 1.5 21 3 18 15 13 (10) 12 15 20 (25) (30) 19 +0.041 +0.028 26 16 22 19 +0.021 0 16 15 10 12 15 20 25 (30) 21 28 18 24 21 18 16 12 15 20 25 30 (35) (40) 22 29 20 +0.041 +0.028 2 26 22 20 +0.021 0 18 (15) (20) (25) (30) (35) (40) 24 32 - - - - - 24 - 20 +0.061 +0.040 15 20 25 30 (35) 40 30 5 40 5 24 +0.041 +0.028 2 32 4 30 24 25 (15) (20) (25) 30 (35) 40 50 35 +0.050 +0.034 45 29 37 35 +0.025 0 29 30 (20) (25) 30 (35) 40 50 40 50 34 +0.050 +0.034 42 40 34 +0.025 0 35 +0.075 +0.050 (20) (25) (30) (35) (40) (50) 45 60 - - - - - 45 - - 40 (20) (25) (30) (35) (40) (50) 50 65 - - - - - 50 - - 50 (30) (35) (40) (50) (60) 60 +0.060 +0.041 75 - - - - - 60 +0.030 0 - - QFeature: Lubricant is blended into the flange so that one bushing can bear radial journal load and thrust load at the same time. M Material: High Tensile Brass Alloy Solid Lubricant Embedded · L=10~25 · L=30, 40 ERecommended Mating Shaft d8: General Use (High-Load) e7: General Use (Light Load) f8: High Precision Use g6: High Precision Use (Intermittent Operation) MPBAZ (Oil Groove I.D. F7 O.D. m6) 6.3 1.6 ( ) L/2 L -0.1 -0.3 C0.3~0.5 15° d F7 D m6 1.6 1.6 1~2.5 L/2 L/4 L/4 -0.1 -0.3 L A Rotation Stopper Screw (Reference) Thickness (N) R1~2 0~3 10° Detail for A (Both Sides) Part Number - L MPGZ10 MPSZ12 MPKZ16 - - - 15 15 20 Part Number L Dm6 Thickness (N) *Rotation Stopper Screw (Reference) Unit Price Type dF7 One Groove (Center) Two Grooves L10 L12 L15 L16 L20 L25 L30 L40 MPBAZ 10 +0.028 +0.013 10 12 15 16 14 +0.018 +0.007 2 M4x8 - - - - 12 +0.034 +0.016 12 15 16 20 18 3 - - - - 13 12 15 16 20 19 +0.021 +0.008 - - - - 15 12 15 20 21 - - - - - 16 12 15 16 20 25 22 - - - 20 +0.041 +0.020 15 16 20 25 30 28 4 M5x8 - - - 25 20 25 30 40 33 +0.025 +0.009 - - - - 30 20 25 30 40 38 - - - - ETolerance H7 (*2) to D dimensions is recommended for housing diameter. ( W See Table 1 on P.341) *Indicated dimensions of Rotation Stopper Screws are recommended dimensions. MPGZ Flat Bar Hinge Pin 1.6 6.3 L d E7 D r6 2 H 1.6 1.6 1.6 R1.0~1.5 R0.4 15º -0.1 -0.3 t 0 -0.03 A R1.0~2.0 L dF7 D m6 2 H P.C.D 1.6 1.6 1.6 R1.0~1.5 R0.4 15º -0.1 -0.3 A R1.0~2.0 L d F7 D m6 2 t H P.C.D 0 -0.03 t 0 -0.03 1.6 1.6 1.6 R1.0~1.5 R0.4 15° -0.1 -0.3 d1 d2 h A R1.0~2.0 R1~2 0~6 10º d1 d2 h MPGZ Flat Bar Hinge Pin MPGZ (Standard) MPSZ (Flat-head Countersunk Screw Hole) MPKZ (Low Head Screw Hole) d=6~40 d=50 d=6~12 d=15~50 ERecommended Mating Shaft d8: General Use (High-Load) e7: General Use (Light Load) f8: High Precision Use g6: High Precision Use (Intermittent Operation) A Details M Material: High Tensile Brass Alloy Solid Lubricant Embedded QFeature: Lubrication frequency can be reduced by gathering initial grease in oil groove. QFeature: Shouldered, less likely to pull-out. EUse of Rotation Stopper Screws is recommended to affix bushings. DP.89 DP.89 Configure Online Configure Online Configure Online Part Number Unit Price Type d L10 L12 L15 L20 L25 L30 L35 L40 L50 L60 MPFZ 5 - - - - - - - - 6 - - - - - - - 8 - - - - - - 10 - - - - 12 - - - - 13 - - - - 15 - - - - 16 - - - 18 - - - - 20 - - - - 25 - - - 30 - - - - 35 - - - - 40 - - - - 50 - - - - - Part Number Unit Price Type d L10 L12 L15 L20 L25 L30 L40 L50 MPFZU 5 - - - - - - 6 - - - - - 8 - - - - 10 - - - - 12 - - 13 - - - - - 15 - - - 16 - - - 20 - - - 25 - - - - - 30 - - - - - Part Number L Dr6 H t Housing Dia. (Recommended Dimension) Type dE7 Reference Dimension Tolerance (H7) MPGZ (Standard) 6 +0.032 +0.020 10 12 12 +0.034 +0.023 22 3 12 + 0.018 0 8 +0.040 +0.025 10 12 15 14 25 14 10 10 12 15 20 16 16 12 +0.050 +0.032 10 12 15 20 25 18 30 18 13 12 15 20 25 19 +0.041 +0.028 19 + 0.021 0 15 12 15 20 25 21 35 21 16 12 15 20 25 30 22 22 18 14 20 25 30 35 24 40 24 20 +0.061 +0.040 14 20 25 30 35 40 28 45 5 28 25 14 20 25 30 35 40 33 +0.050 +0.034 50 33 + 0.025 0 30 20 25 30 35 40 38 55 38 35 +0.075 +0.050 20 25 30 35 40 44 65 44 40 25 30 35 40 45 50 50 70 7 50 50 30 35 40 45 50 60 62 +0.060 +0.041 90 8 62 + 0.030 0 Part Number L Dm6 MPSZ MPKZ Housing Dia. (Recommended Dimension) H Mounting Hole t H Mounting Hole Accessories: Hex Socket Low Head Cap Screw t Type dF7 P.C.D d1 d2 h Flat-head Countersunk Screw P.C.D d1 d2 h Reference Dimension Tolerance (H7) MPSZ (Flat-head Countersunk Screw Hole) MPKZ (Low Head Screw Hole) 6 +0.022 +0.010 10 12 10 +0.015 +0.006 25 15 8.5 3.5 2.5 M3 3 25 17 6 3.5 2.2 M3-10x2 pcs. 4 10 + 0.015 0 8 +0.028 +0.013 12 15 12 +0.018 +0.007 28 18 27 19 12 + 0.018 0 10 12 15 20 14 30 20 29 21 14 12 +0.034 +0.016 12 15 20 18 40 28 36 26 7.5 4.5 3 M4-12x2 pcs. 5 18 15 12 15 20 21 +0.021 +0.008 50 35 39 29 M4-12x4 pcs. 21 + 0.021 0 16 12 15 20 25 30 22 40 30 22 18 20 25 30 24 42 32 24 20 +0.041 +0.020 20 25 30 35 40 28 13 6 3.5 M5 5 49 38 9 5.5 3.7 M5-16x4 pcs. 6 28 25 20 25 30 35 40 33 +0.025 +0.009 55 40 54 43 33 + 0.025 0 30 20 25 30 35 40 38 60 45 63 50 11 6.6 4.2 M6-20x4 pcs. 8 38 35 +0.050 +0.025 20 25 30 35 40 44 70 52 69 56 44 40 25 30 35 40 45 50 80 60 16 7 4.5 M6 7 82 66 14 9 5.2 M8-25x4 pcs. 10 50 50 30 35 40 45 62 +0.030 +0.011 100 75 8 94 78 62 + 0.030 0 Alterations Code Spec. Price Adder H HC HC Flange Diameter 0.1mm Increment Ordering Code HC48.5 D+2<HC<H KC KC Flange Cut 0.1mm Increment Ordering Code KC4.5 D/2<KC<H/2 t TC TC Flange Thickness 0.1mm Increment Ordering Code TC4.1 t/2<TC<t EOverall Length will be shorter by t-TC. Part Number - L - (HC, KC, TC) MPFZ30 - 30 - HC48.5-KC20.5-TC4.1 Configure Online Configure Online d-L Unit Price MPGZ MPSZ MPKZ 6-10 6-12 8-10 - - 8-12 8-15 10-10 - - 10-12 10-15 10-20 12-10 - - 12-12 12-15 12-20 d-L Unit Price MPGZ MPSZ MPKZ 12-25 - - 13-12 - - 13-15 - - 13-20 - - 13-25 - - 15-12 15-15 15-20 15-25 - - 16-12 16-15 16-20 16-25 d-L Unit Price MPGZ MPSZ MPKZ 16-30 18-14 - - 18-20 18-25 18-30 18-35 - - 20-14 - - 20-20 20-25 20-30 20-35 20-40 25-14 - - d-L Unit Price MPGZ MPSZ MPKZ 25-20 25-25 25-30 25-35 25-40 30-20 30-25 30-30 30-35 30-40 35-20 35-25 35-30 d-L Unit Price MPGZ MPSZ MPKZ 35-35 35-40 40-25 40-30 40-35 40-40 40-45 40-50 - - 50-30 50-35 50-40 50-45 50-50 - - 50-60 - - QThrust Type M Material: High Tensile Brass Alloy Solid Lubricant Embedded MPFZ (Standard) MPFZU (Thin Wall) ERecommended Mating Shaft d8: General Use (High-Load) f8: High Precision Use e7: General Use (Light Load) g6: High Precision Use (Intermittent Operation) EPress-fit is recommended to affix bushings. L d E7 R0.3~0.5 R0.3~0.5 15° t 1~2.5 -0.1 -0.3 1.6 2-C0.3~0.5 H A 1.6 D r6 L d E7 R0.5~1.0 R0.3 2 Insertion Guide D t -0.1 -0.3 1.6 2-C0.3~0.5 H B 1.6 D r6 1.6 6.3 -0.03 -0.05 R1~3 2.5~6 10° (0~3.5 Opposite Side) Thickness (N) Thickness (N) R0.5~1.0 2~5 10° A Details B Details For Pricing and Days to Ship,Please Configure Online.
Transcript of For and ,Please Con˜gure Online. Oil Free Bushings10 12 15 20 16 16 12 +0.050 +0.032 10 12 15 20 25...
-3431 -3441### http://fa.misumi.jp/###### ###-3431 -3441
Oil Free BushingsCopper Alloy, Oil Groove / Flanged, Standard / Thin Wall
Q�Flanged, Standard / Thin Wall
Oil Free BushingsCopper Alloy, Thrust
Part Number - L
MPBAZ10MPFZ20MPFZU12
---
153015
QOil Groove
Part NumberL
MPFZ MPFZUHousing Dia. (Recommended Dimension)
MPFZ MPFZU
Type dE7 Dr6Thickness
(N) H 0t-0.1 Dr6
Thickness (N) H 0
t-0.1Reference Dimension
Tolerance(H7)
Reference Dimension
Tolerance(H7)
MPFZMPFZU
*L dimensions in ( ) are available for MPFZ only.
5 +0.032+0.020
10 12 9 +0.028+0.019
2
14
2
7+0.028+0.019 1
11
2
9 +0.0150
7+0.015
06 10 12 15 10 16 8 12 10 88 +0.040
+0.02510 12 15 20 12
+0.034+0.023
20 10 14 12+0.018
0
1010 10 12 15 20 (25) (30) 14 22 12
+0.034+0.023
16 14 12+0.018
012
+0.050+0.032
10 12 15 20 25 30 18
3
25
3
151.5
21
3
18 1513 (10) 12 15 20 (25) (30) 19
+0.041+0.028
26 16 22 19
+0.0210
1615 10 12 15 20 25 (30) 21 28 18 24 21 1816 12 15 20 25 30 (35) (40) 22 29 20 +0.041
+0.028 2 26 22 20+0.021
018 (15) (20) (25) (30) (35) (40) 24 32 - - - - - 24 -20
+0.061+0.040
15 20 25 30 (35) 40 30
5
40
5
24 +0.041+0.028 2
324
30 2425 (15) (20) (25) 30 (35) 40 50 35
+0.050+0.034
45 29 37 35+0.025
0
2930 (20) (25) 30 (35) 40 50 40 50 34 +0.050
+0.034 42 40 34 +0.0250
35+0.075+0.050
(20) (25) (30) (35) (40) (50) 45 60 - - - - - 45 - -40 (20) (25) (30) (35) (40) (50) 50 65 - - - - - 50 - -50 (30) (35) (40) (50) (60) 60 +0.060
+0.041 75 - - - - - 60 +0.0300 - -
QFeature: Lubricant is blended into the flange so that one bushing can bear radial journal load and thrust load at the same time.
M Material: High Tensile Brass Alloy
Solid Lubricant Embedded
· L=10~25 · L=30, 40
ERecommended Mating Shaft d8: General Use (High-Load) e7: General Use (Light Load) f8: High Precision Use g6: High Precision Use
(Intermittent Operation)
MPBAZ (Oil Groove I.D. F7 O.D. m6)6.3 1.6( )
L/2L-0.1
-0.3
C0.3~0.5
15°
d F7
Dm
6
1.6
1.6
1~2.5
L/2 L/4L/4-0.1-0.3L
ARotation Stopper Screw (Reference) Th
ickne
ss (N
)
R1~2
0~3
10°
Detail for A (Both Sides)
Part Number - L
MPGZ10MPSZ12MPKZ16
---
151520
Part Number L Dm6Thickness
(N)*Rotation Stopper Screw (Reference)
Unit PriceType dF7 One Groove (Center) Two Grooves L10 L12 L15 L16 L20 L25 L30 L40
MPBAZ
10 +0.028+0.013 10 12 15 16 14 +0.018
+0.0072
M4x8
- - - -12
+0.034+0.016
12 15 16 20 18
3
- - - -13 12 15 16 20 19
+0.021+0.008
- - - -15 12 15 20 21 - - - - -16 12 15 16 20 25 22 - - -20
+0.041+0.020
15 16 20 25 30 284 M5x8
- - -25 20 25 30 40 33 +0.025
+0.009- - - -
30 20 25 30 40 38 - - - - ETolerance H7 (*2) to D dimensions is recommended for housing diameter. (W�See Table 1 on P.341) *Indicated dimensions of Rotation Stopper Screws are recommended dimensions.
1.66.3
L
dE7
Dr6
2
H
1.6
1.6
1.6
R1.0~1.5
R0.4
15º
-0.1-0.3
t 0 -0.03
A
R1.0~2.0
L
dF7
Dm
6
2
HP.
C.D
1.6
1.6
1.6
R1.0~1.5
R0.4
15º
-0.1-0.3
A
R1.0~2.0
L
dF7
Dm
6
2
t
HP.
C.D
0 -0.03
t 0 -0.03
1.6
1.6
1.6
R1.0~1.5
R0.4
15°
-0.1-0.3
d1 d2
h
A
R1.0~2.0
R1~2
0~6
10º
d1 d2
h
MPGZ
Flat Bar
Hinge Pin
1.66.3
L
dE7
Dr6
2
H
1.6
1.6
1.6
R1.0~1.5
R0.4
15º
-0.1-0.3
t 0 -0.03
A
R1.0~2.0
L
dF7
Dm
6
2
HP.
C.D
1.6
1.6
1.6
R1.0~1.5
R0.4
15º
-0.1-0.3
A
R1.0~2.0
L
dF7
Dm
6
2
t
HP.
C.D
0 -0.03
t 0 -0.03
1.6
1.6
1.6
R1.0~1.5
R0.4
15°
-0.1-0.3
d1 d2
h
A
R1.0~2.0
R1~2
0~6
10º
d1 d2
h
MPGZ
Flat Bar
Hinge Pin
MPGZ (Standard)
MPSZ (Flat-head Countersunk Screw Hole)
MPKZ (Low Head Screw Hole)
d=6~40 d=50
d=6~12 d=15~50
ERecommended Mating Shaftd8: General Use (High-Load)e7: General Use (Light Load)f8: High Precision Useg6: High Precision Use
(Intermittent Operation)
A Details
M Material: High Tensile Brass Alloy Solid Lubricant Embedded
QFeature: Lubrication frequency can be reduced by gathering initial grease in oil groove.
QFeature: Shouldered, less likely to pull-out.
EUse of Rotation Stopper Screws is recommended to affix bushings.
D P.89
D P.89
Con�gure Online
Con�gure Online
Con�gure Online
Part Number Unit PriceType d L10 L12 L15 L20 L25 L30 L35 L40 L50 L60
MPFZ
5 - - - - - - - -6 - - - - - - -8 - - - - - -10 - - - -12 - - - -13 - - - -15 - - - -16 - - -18 - - - -20 - - - -25 - - -30 - - - -35 - - - -40 - - - -50 - - - - -
Part Number Unit PriceType d L10 L12 L15 L20 L25 L30 L40 L50
MPFZU
5 - - - - - -6 - - - - -8 - - - -10 - - - -12 - -13 - - - - -15 - - -16 - - -20 - - -25 - - - - -30 - - - - -
Part Number L Dr6 H t Housing Dia. (Recommended Dimension)Type dE7 Reference Dimension Tolerance (H7)
MPGZ(Standard)
6 +0.032+0.020 10 12 12
+0.034+0.023
22
3
12+ 0.018
08 +0.040
+0.02510 12 15 14 25 14
10 10 12 15 20 16 1612
+0.050+0.032
10 12 15 20 25 18 30 1813 12 15 20 25 19
+0.041+0.028
19
+ 0.0210
15 12 15 20 25 21 35 2116 12 15 20 25 30 22 2218 14 20 25 30 35 24 40 2420 +0.061
+0.040
14 20 25 30 35 40 28 45
5
2825 14 20 25 30 35 40 33
+0.050+0.034
50 33+ 0.025
030 20 25 30 35 40 38 55 3835 +0.075
+0.050
20 25 30 35 40 44 65 4440 25 30 35 40 45 50 50 70 7 5050 30 35 40 45 50 60 62 +0.060
+0.041 90 8 62 + 0.0300
Part Number L Dm6MPSZ MPKZ Housing Dia.
(Recommended Dimension)H Mounting Hole t H Mounting Hole Accessories: Hex Socket Low Head Cap Screw tType dF7 P.C.D d1 d2 h Flat-head
Countersunk Screw P.C.D d1 d2 h Reference Dimension Tolerance (H7)
MPSZ(Flat-head
Countersunk Screw Hole)
MPKZ(Low Head Screw Hole)
6 +0.022+0.010 10 12 10 +0.015
+0.006 25 15
8.5 3.5 2.5 M3 3
25 176 3.5 2.2 M3-10x2 pcs. 4
10 + 0.0150
8 +0.028+0.013
12 15 12 +0.018+0.007
28 18 27 19 12 + 0.018010 12 15 20 14 30 20 29 21 14
12+0.034+0.016
12 15 20 18 40 28 36 26
7.5 4.5 3
M4-12x2 pcs.
5
1815 12 15 20 21
+0.021+0.008 50 35
39 29M4-12x4 pcs.
21+ 0.021
016 12 15 20 25 30 22 40 30 2218 20 25 30 24 42 32 2420 +0.041
+0.020
20 25 30 35 40 28
13 6 3.5 M5 5
49 38 9 5.5 3.7 M5-16x4 pcs. 6 2825 20 25 30 35 40 33
+0.025+0.009
55 40 54 43 33+ 0.025
030 20 25 30 35 40 38 60 45 63 50 11 6.6 4.2 M6-20x4 pcs. 8 3835 +0.050
+0.025
20 25 30 35 40 44 70 52 69 56 4440 25 30 35 40 45 50 80 60 16 7 4.5 M6 7 82 66 14 9 5.2 M8-25x4 pcs. 10 5050 30 35 40 45 62 +0.030
+0.011 100 75 8 94 78 62 + 0.0300
Alterations Code Spec. Price Adder
H HC HCFlange Diameter0.1mm Increment
Ordering Code HC48.5D+2<HC<H
KCKC
Flange Cut0.1mm Increment
Ordering Code KC4.5D/2<KC<H/2
tTC
TC
Flange Thickness0.1mm Increment
Ordering Code TC4.1t/2<TC<tEOverall Length will be shorter by t-TC.
Part Number - L - (HC, KC, TC)
MPFZ30 - 30 - HC48.5-KC20.5-TC4.1
Con�gure Online
Con�gure Online
d-L Unit Price
MPGZ MPSZ MPKZ6-106-128-10 - -8-128-15
10-10 - -10-1210-1510-2012-10 - -12-1212-1512-20
d-L Unit Price
MPGZ MPSZ MPKZ12-25 - -13-12 - -13-15 - -13-20 - -13-25 - -15-1215-1515-2015-25 - -16-1216-1516-2016-25
d-L Unit Price
MPGZ MPSZ MPKZ16-3018-14 - -18-2018-2518-3018-35 - -20-14 - -20-2020-2520-3020-3520-4025-14 - -
d-L Unit Price
MPGZ MPSZ MPKZ25-2025-2525-3025-3525-4030-2030-2530-3030-3530-4035-2035-2535-30
d-L Unit Price
MPGZ MPSZ MPKZ35-3535-4040-2540-3040-3540-4040-4540-50 - -50-3050-3550-4050-4550-50 - -50-60 - -
QThrust Type
M Material: High Tensile Brass Alloy Solid Lubricant Embedded
MPFZ (Standard) MPFZU (Thin Wall)
ERecommended Mating Shaft d8: General Use (High-Load) f8: High Precision Use e7: General Use (Light Load) g6: High Precision Use (Intermittent Operation)EPress-fit is recommended to affix bushings.
L
dE7
R0.3~0.5 R0.3~0.5
15°t
1~2.5
-0.1-0.3
1.6
2-C0.3~0.5
H
A
1.6
Dr6
L
dE7
R0.5~1.0
R0.32 Insertion Guide D
t-0.1-0.3
1.6
2-C0.3~0.5
H
B
1.6
Dr6
1.66.3
-0.03-0.05
R1~3
2.5~6
10°
(0~3.5 Opposite Side)
Thickne
ss (N)
Thickne
ss (N)
R0.5~1.0
2~5
10°
A Details B Details
For Pricing and Days to Ship,Please Con�gure Online.
