Foundation Design HaFrom Foundation Geometry to Construction Drawing in Minutes!

Project Timeline

Project Timeline

Input Geometry

Load Generation

Analysis/ Design

Foundation Sketches

Material Quantities

Construction Drawings

Input Geometry

Load Generation

Analysis/ Design

Foundation Sketches

Material Quantities

Construction DrawingsProjectCOMPLETION

Foundation3D automatically generates loads for exchangers, vessels,and pipe racks.

Mat3D

Auto-Load GenerationWith FOUNDATION3D you can complete horizontalexchanger, horizontal vessel, vertical tower, or apipe rack foundation design in minutes. You mere-ly enter the equipment geometry such as exchang-er or vessel diameter or the tower height to obtainprogram-generated automatic load combinations.

u Save valuable time in generating routine loadcombinations.

u Generate your own load combinations to meetyour client�s specific requirements.

u With a few mouse clicks, eliminate guess workregarding the adequacy of existing foundationto support new loads.

Complete Material QuantityGenerationIf you are trying to allocate project costs or esti-mate the material lead times of the project, youknow the value of having the material quantities.Dimensional Solutions� products generate materialquantities at design time so you can estimate costsand project completion times more accurately.

u Generate concrete, reinforcing steel, formwork,and excavation quantities for your estimator oryour construction field crew.

u Determine project material and labor costsaccurately.

Powerful DesignTo complete a design/analysis using standardindustry codes, enter only a few parameters suchas minimum footing depth, soil cover and pierloads. The program then takes over and within min-utes it generates dimensional design sketches withplan, elevation, and section(s) through piers.

u Design and analyze symmetrical/ unsymmetri-cal mat, combined, or spread soil and pilesupported foundations.

u Control design to meet your company�s orclient�s standards.

u Adhere to domestic and international code loadcase/combination requirements.

u Change pile pattern to asymmetrical anytime.

u Generate dimensioned, relative-scale sketchesfor use as intermediate or final deliverables.

as Never Been Easier

Single Program SolutionAs a design engineer, you know the sequence youhave to follow and the time it takes to completeyour foundation design. Rather than using differentprograms to perform different tasks in the designworkflow such as pier design, footing design, pilelayout design, material quantity generation, andconstruction drawing creation, DimensionalSolutions� design suite combines these multi-steptasks into one simple, integrated program.

Dimensional Solutions� design suite has beendeveloped by Civil/Structural engineers forCivil/Structural engineers.

u Increase productivity by reducing the numberof intermediate manual design steps.

u Efficiently utilize human resources throughincreased productivity.

u Reduce overall project costs by efficient utiliza-tion of human resources.

ProjectCOMPLETION

t3D allows unlimited piers in the design.

Create Final Design Sketches andConstruction Drawings inSecondsSince Dimensional Solutions� suite automaticallycreates design sketches and full construction draw-ings, you can use your resources more effectively.Imagine the workhours and costs that can be savedby having the application create the constructiondrawings.

u Distribute foundation design sketches consist-ing of plan, elevation, and sections throughuser specified piers and material quantities toyour upstream or downstream clients.

u Generate final construction drawings in a popu-lar CAD engine of your choice such asAutocad®, Microstation®, andSmartSketch®.

u Eliminate down time between design and con-struction by delivering revised constructiondrawings reflecting field changes in seconds.

WithoutDimensional Solutions�Design Suite

WithDimensional Solutions�Design Suite

For Your Comprehensive Foundation Design Needs Dimensional Solutions� Foundation Design Suite

Mat3DTM

- Residential/Commercial/Industrial/Petrochemical ApplicationsDesigns spread, combined, and mat foundations.

Combined3DTM

- Residential/Commercial/Industrial ApplicationsDesigns spread and combined foundations.

Foundation3DTM

- Petrochemical ApplicationsDesigns spread and combined footings with automatic load generation for horizontal exchanger,horizontal vessel, vertical tower, or a pipe rack foundation.

Tel: (281) 497-5991Fax: (281) 497-0683

E-mail: Info@Dimsoln.comWeb site: www.Dimsoln.com

Dimensional Solutions, Inc.ADVANCED SOFTWARE FOR FOUNDATION DESIGN

DESIGN CONSTRUCTION

DRAWING

Design to Drawings in One Software Solution