Fluids day 1

13
Fluid Mechanics and Thermodynamics Day 1: Object Density and Hydrostatic Pressure

Transcript of Fluids day 1

Page 1: Fluids day 1

Fluid Mechanics and Thermodynamics

Day 1: Object Density and Hydrostatic Pressure

Page 2: Fluids day 1

Fluids are anything that can flow: liquids or gases.

Fluids conform to their containers

What is a fluid?

Page 3: Fluids day 1

What if I had a piece of material like the cylinder shown, and I wanted to know what material it was?

Brainstorm… What methods could you use to determine if they were the same?

What if?

Page 4: Fluids day 1

What am I?

Page 5: Fluids day 1

Density: Ratio of mass to volume of an object

To calculate density, determine the mass per unit volume, or:

r =m/v

Density (kg/m3) is an intrinsic property of matter.

Specific gravity: The ratio of an objects density to that of water at 4°C

Things to know:

What is the specific gravity of Aluminum? What about oil?

Page 6: Fluids day 1

Pressure is force/area

In pascals (Pa) = N/m2

Example: A cat with mass 20 kg walks across the snow. If snow collapses under a pressure of 0.5 psi (2500 Pa), determine the minimum size of the cat’s paws.

Pressure

Page 7: Fluids day 1

Does AIR have pressure?

How do you know?

What about WATER?

1 atmosphere = 101.325 kPa , or about 101,300 Pa.

Page 8: Fluids day 1

My fish tank is 10 gallons. (I googled: 10 gallons = 0.0379 m3)

How much pressure does the top (open) surface of my tank experience?

How about the bottom?

*Note that we’re only interested in the pressure downwards on the floor of the tank. The sides cancel out!

How much pressure?

Page 9: Fluids day 1

The pressure at any depth is the sum of the weight of the fluid and

the atmosphere:

P = P0+ρgh

ρ = fluid’s density, g = 9.8 m/s2, and h = height of water column/ depth

Absolute Pressure and Gauge Pressure

Page 10: Fluids day 1

A foolish boy tries to use a garden hose for air as he swims at the bottom of a 5.00 m deep pool. What goes wrong?

Absolute Pressure and Gauge Pressure

Page 11: Fluids day 1

Think?

How does the pressure 6” below the surface of a swimming pool at sea level compare to the pressure 6” below the ocean?

Page 12: Fluids day 1

Use a blood pressure cuff (sphygmomanometer) to measure the maximum and minimum pressure exerted by your heart.

Restrict blood, then release until the very first push: systolic: heart generates its maximum pressure.

Keep relieving pressure (letting out air) until blood flows continuously: part of hearbeat cycle when pressure is lowest: Diastolic.

120/80 is typical…

Blood Pressure?

Page 13: Fluids day 1

Chapter 14: Read 14.1-14.7 Do #3.1, 4.1, and 6.2

HW: Due Friday