FLOW CONTROL TOOLS
1
FLOW CONTROL TOOLS DTI EXPANDING INSTRUMENT HANGER The DTI location with no Landing Nipple. Run on a suitable explosive or electric Setting Tool, the Instrument Hanger can pass through smaller ID tubing and then set in larger ID tubing or casing. When the setting tool is activated the Expanding Instrument Hanger slips securely grip the tubing and the setting tool shears the setting pin, releasing it from the Instrument Hanger. The Setting Tool and Setting Adaptor Kit are then returned to surface leaving the Instrument Hanger secured in the well. The DTI Expanding Instrument Hanger is released by latching the upper Fish Neck with an appropriate pulling tool and lightly jarring upwards to shear the release pins. The DTI Expanding Instrument Hanger is available in a range of materials with common gauge thread connections. w/ downholetoolsinternational.com e/ [email protected] FEATURES AND BENEFITS - Hang a gauge in larger diameter tubing / casing with no landing nipple - Can be used to retain debris and prevent it moving up hole - Hang a gauge in tubing below a restriction - Locking Springs ensure the Expandable Gauge Hanger locks securely in the casing - Adaptor Kits available for common Explosive Setting Tools - Retrieved with standard Slickline Pulling Tools Running OD Sets Inside Gauge Connection Fishing Neck Designation 2.75” 3 1/2 - 7” 15/16UN or Amerada 2.313” 275EH*** DATA 2.50” 3 1/2 - 6 5/8” 15/16UN or Amerada 1.75” 250EH***
Transcript of FLOW CONTROL TOOLS
FLOW CONTROL TOOLS
DTI EXPANDING INSTRUMENT HANGER The DTI location with no Landing Nipple. Run on a suitable explosive or electric Setting Tool, the Instrument Hanger can pass through smaller ID tubing and then set in larger ID tubing or casing.
When the setting tool is activated the Expanding Instrument Hanger slips securely grip the tubing and the setting tool shears the setting pin, releasing it from the InstrumentHanger. The Setting Tool and Setting Adaptor Kit are then returned to surface leaving the Instrument Hanger secured in the well.
The DTI Expanding Instrument Hanger is released by latching the upper Fish Neck with an appropriate pulling tool and lightly jarring upwards to shear the release pins.
The DTI Expanding Instrument Hanger is available in a range of materials with common gauge thread connections.
w/ downholetoolsinternational.come/ [email protected]
FEATURES AND BENEFITS - Hang a gauge in larger diameter tubing / casing with no landing nipple
- Can be used to retain debris and prevent it moving up hole
- Hang a gauge in tubing below a restriction
- Locking Springs ensure the Expandable Gauge Hanger locks securely in the casing
- Adaptor Kits available for common Explosive Setting Tools
- Retrieved with standard Slickline Pulling Tools
Running OD Sets Inside Gauge Connection Fishing Neck Designation
2.75” 3 1/2 - 7” 15/16UN or Amerada
2.313” 275EH***
DATA
2.50” 3 1/2 - 6 5/8” 15/16UN or Amerada
1.75” 250EH***
![Classifying Malware Represented as Control Flow Graphs ...ghyan/papers/dsn19.pdf · A. Control Flow Graph MAGIC relies on the state-of-the-art tools, such as IDA Pro [28], to extract](https://static.fdocuments.in/doc/165x107/5f67cfd7f97d6620c1124542/classifying-malware-represented-as-control-flow-graphs-ghyanpapersdsn19pdf.jpg)
