Flopetrol - Rotary Wireline Cutters - Hunting Energy ... · PDF filew. | e....
-
Upload
duongthuan -
Category
Documents
-
view
251 -
download
7
Transcript of Flopetrol - Rotary Wireline Cutters - Hunting Energy ... · PDF filew. | e....
w. www.hunting-intl.com | e. [email protected]
Wireline Equipment Catalogue v.3.2 | Flopetrol
Flopetrol
A Wireline Cutter is required when a slickline or stranded wireline must be cut in the well. The Flopetrol* Wireline Cutter is run down under its own weight guided by the line and when it strikes the stuck tool, it cuts the wire and wedges it into its body. Subsequently the cutter will be retrieved along with the cut wire.
When the cutter strikes the rope socket of the stuck tool, the shock provided by the inertia of the hammer causes a shear pin to shear and the knife then rotates, cutting the wire. The rotation of the knife also pushes up a tapered key, wedging the wire into the cutter’s body.
The Flopetrol wireline cutter is supplied in two models, one being designed for use with slicklines, the other for use with stranded lines. Both models can be supplied in two versions. The standard version is the one normally used, but if there is any risk of cutting the wireline at an interface, the interface version using a ‘go devil’ is preferred. The hammer section of the standard cutter is used as the ‘go devil’ on the interface version.
The Flopetrol cable cutter has the following advantages:
• no risk of accidental cutting at an interface
• will not cut against the tubing
• a clean cut by shearing is obtained even with regular use over a long period, due to the special knife shape
• wire is cut short near to the rope socket: 1 inch (25 mm) for the slickine model, 2 inches for the stranded line model
• cutting force is provided by the cutter’s own momentum rather than an outside energy supply
• wire cutting and retrieval and cutter fishing are carried out in one operation
Slickline - M-802709Stranded Line - M-802721
(See charts overleaf)
Wireline O
perations - Fishing Tools
Flopetrol - Rotary Wireline Cutters
WIRELINE OPERATIONS: FISHING TOOLS
* Denotes the mark of Schlumberger
When the cutter strikes the rope socket of the stuck tool, the shock provided by the inertia of the hammer causes a shear pin to shear and the knife then rotates, cutting the wire.
Standard C
utter
Wire
Rotating Knife
Fixed Knife
Shock
Cutter D
etail
w. www.hunting-intl.com | e. [email protected]
Wireline Equipment Catalogue v.3.2 | Flopetrol
Flopetrol
Wireline O
perations - Fishing Tools
Flopetrol - Rotary Wireline Cutters
WIRELINE OPERATIONS: FISHING TOOLS
* Denotes the mark of Schlumberger
Interface Cutter
FLOPETROL ROTARY WIRELINE CUTTERS - SPECIFICATIONS
Cable CutterVersion
Assembly Number
Capacity
Maximum OD
Length ‘L1’
Go-devil Length ‘L2’
Weight
Go-devil Weight
Remark
Slickline 1 1/2”Standard and Interface
M-802709
0.072” - 0.108”
1 29/64” (37 mm)
26 1/2” (672 mm)With Hammer
11 1/4” (287 mm)Without Go-devil
- 23 5/8” (600 mm)
10.5 lbm (4.8 kg)With Hammer
4.5 lbm (2.1 kg)Without Go-devil
- 9.5 lbm (4.3 kg)
The line is cut 1” from the Rope Socket
Slickline and Stranded 1 7/8”Standard and Interface
M-802721
0.092” - 0.250”
1 29/64” (37 mm)
52 7/8” (1342 mm)With Hammer
16 5/8” (422 mm)Without Go-devil
- 47 1/4” (1200 mm)
32.5 lbm (14.8 kg)With Hammer
9.5 lbm (4.3 kg)Without Go-devil
- 29.5 lbm (13.3 kg)
The line is cut 2” from the Rope Socket
FLOPETROL ROTARY WIRELINE CUTTERS - SPARE PARTS
Ref.
1*
2*
3*
4*
4*
4*
4*
4*
4*
4*
4*
4*
4*
5
5
6*
7*
8*
9*
10
11
12
13
14
15
Description
Fishing Head
Fixed Knife
Rotating Knife
Tapered Key for 0.072”
Tapered Key for 0.082”
Tapered Key for 0.092”
Tapered Key for 0.102”
Tapered Key for 0.105”
Tapered Key for 0.108”
Tapered Key for 0.125”
Tapered Key for 3/16”
Tapered Key for 7/32”
Tapered Key for 1/4”
Shear Pin 1/8” Brass
Shear Pin 3/16 Brass
Parallel Key
Long Sinker Bar
Plug
Hammer
Wireline Guide
Hammer Retainer
Short Sinker Bar
Extension Piece
Screw HC M5 x 0.8” - 10 (Quantity 4)
Screw HC M8 x 125” - 12 (Quantity 4)
Slickline 1 7/8”M-802721
M-802710
M-802716
M-802712
-
-
M-819278
M-812278
M-819277
M-819277
M-873365
M-802711
M-802801
M-802802
-
G-823556
M-802717
M-802719
M-802718
M-802715
M-800832
M-802714
M-802720
M-802713
-
M-824867
* Recommended spare parts (See diagram overleaf)Special tapered keys available on request.
Slickline 1 1/2”M-802709
M-802700
M-802699
M-802704
M-802804
M-802705
M-802805
M-812423
M-813070
M-813980
-
-
-
-
G-823998
-
M-802702
M-802708
M-802698
M-802701
M-801121
M-802706
M-802707
M-802703
G-820401
-
w. www.hunting-intl.com | e. [email protected]
Wireline Equipment Catalogue v.3.2 | Flopetrol
Flopetrol
Wireline O
perations - Fishing Tools
Flopetrol - Rotary Wireline Cutters
WIRELINE OPERATIONS: FISHING TOOLS
* Denotes the mark of Schlumberger
Interface Version Standard Version
Slickline Model: