www.habia.com world class solutions

FlexiformFl

exifor

mSection G Issue 2

Page Name Impedance Diameter over tinned braid (mm & in)G.2 Flexiform 220 50 Ohm 2,80 0,110”G.3 Flexiform 380 50 Ohm 4,35 0,171”G.4 Flexiform 401 50 Ohm 6,40 0,250”G.5 Flexiform 401 L 50 Ohm 6,35 0,250”G.6 Flexiform 402 NM 50 Ohm 6,60 0,141”G.7 Flexiform 402 L 50 Ohm 3,60 0,141”G.8 Flexiform 405 NM 50 Ohm 2,20 0,086”

www.habia.com world class solutions

Alternatives: Construction:

ConductorDielectricBraidWeightTemperature rating (°C)Order reference

JacketWeightTemperature rating (°C)Order reference

JacketWeightTemperature rating (°C)

Notes: Order referenceAll dimensions nominal (± 4%)unless otherwise stated.All dimensions in mm.

Electrical: AttenuationImpedance MHz dB/100mCapacitanceVelocity of signal propagationSignal delayWorking voltage, AC r.m.s.Working voltage, DCAttenuation, typical values(nominal values at an air temperature of +20°C)Power, typical values(ambient temperature of 40°C at sea level and VSWR 1.0)Suitable for frequenciesShielding effectiveness

Environmental & Mechanical: Average Power *Minimum bend radius (MBR) single bend (installation) MHz WMinimum bend radius (MBR) dynamic useFlame resistanceFlammabilityConnectors

Data provided indicates nominal values unless stated otherwise and is only valid for reference purposes at the time of publication and is subject to change without prior notice.

1

2

3

4

5

6

7

8

9

10

11

12

2G

Flexiform 220Re-formable Coaxial

®

50 ± 2 Ohms94 pF/m 400 32

70% 900 494.8 ns/m 1800 73

2000 max 2000 804000 max 2400 87

see table (top right) 3000 985000 128

see table (bottom right) 10000 19018000 270

up to 18 GHztypically <-130dB/m

single bend: 20mmmultiple bends: 80mm 400 320

passes IEC 60332-3-24 900 210UL 94 V-0 1800 145

Custom made connector required 2000 1352400 115

*Average power Figures stated are for un-jacketed and FJ versions only 3000 1105000 7510000 5518000 40

(in) (mm) Flexiform 220Reformable alternative to Flexiform 220semi-rigid coaxial cables Silver plated copper (1x0,715) 0.028 0,71

Solid extruded PTFE 0.086 2,20Offers the unique ability to Tin-soaked tin plated copper (0,127) 0.110 2,80be hand-formed, no 29 kg/kmspecial tools required -65 / +180°C

31000-220-00 Flexiform 220 FJOutstanding shieldingproperties Flexiform 220 FJ

FPI 205, Blue 0.125 3,20Fluoropolymer jacket (FJ), 34 kg/kmhalogen free jacket (HFJ) -65 / +180°Cand alternative colours 31000-220-01also available Flexiform 220 HFJ

Flexiform 220 HFJHFI 100, Black 0.149 3,80

38 kg/km-40 / +100°C

31000-220-02

Ref: FF-eFF220-01Date: 2007-11-06Approved by:

www.habia.com world class solutions

Alternatives: Construction:

ConductorDielectricBraidWeightTemperature rating (°C)Order reference

JacketWeightTemperature rating (°C)Order reference

JacketWeightTemperature rating (°C)

Notes: Order referenceAll dimensions nominal (± 4%)unless otherwise stated.All dimensions in mm.

Electrical: AttenuationImpedance MHz dB/100mCapacitanceVelocity of signal propagationSignal delayWorking voltage, AC r.m.s.Working voltage, DCAttenuation, typical values(nominal values at an air temperature of +20°C)Power, typical values(ambient temperature of 40°C at sea level and VSWR 1.0)Suitable for frequenciesShielding effectiveness

Environmental & Mechanical: Average Power *Minimum bend radius (MBR) single bend (installation) MHz WMinimum bend radius (MBR) dynamic useFlame resistanceFlammabilityConnectors

Data provided indicates nominal values unless stated otherwise and is only valid for reference purposes at the time of publication and is subject to change without prior notice.

1

2

3

4

5

6

7

8

9

10

11

12

3G

Flexiform 380Re-formable Coaxial

®

50 ± 2 Ohms94 pF/m 400 20

70% 900 304.8 ns/m 1800 44

2500 max 2000 465000 max 2400 52

see table (top right) 3000 595000 79

see table (bottom right) 10000 12018000 172

up to 18 GHztypically <-130dB/m

single bend: 20mmmultiple bends: 80mm 400 750

passes IEC 60332-3-24 900 500UL 94 V-0 1800 350

Custom made connector required 2000 3302400 300

*Average power Figures stated are for un-jacketed and FJ versions only 3000 2685000 20810000 14718000 110

(in) (mm) Flexiform 380Reformable alternative to Flexiform 380semi-rigid coaxial cables Silver plated copper (1x1,20) 0.047 1,20

Solid extruded PTFE 0.149 3,80Offers the unique ability to Tin-soaked tin plated copper (0,127) 0.171 4,35be hand-formed, no 57 kg/kmspecial tools required -65 / +180°C

31000-380-00 Flexiform 380 FJOutstanding shieldingproperties Flexiform 380 FJ

FPI 205, Blue 0.198 5,05Fluoropolymer jacket (FJ), 65 kg/kmhalogen free jacket (HFJ) -65 / +180°Cand alternative colours 31000-380-01also available Flexiform 380 HFJ

Flexiform 380 HFJHFI 100, Black 0.210 5,35

69 kg/km-40 / +100°C

31000-380-04

Ref: FF-eFF380-03Date: 2007-04-04Approved by:

www.habia.com world class solutions

Alternatives: Construction:

ConductorDielectricBraidWeightTemperature rating (°C)Order reference

JacketWeightTemperature rating (°C)Order reference

JacketWeightTemperature rating (°C)

Notes: Order referenceAll dimensions nominal (± 4%)unless otherwise stated.All dimensions in mm.

Electrical: AttenuationImpedance MHz dB/100mCapacitanceVelocity of signal propagationSignal delayWorking voltage, AC r.m.s.Working voltage, DCAttenuation, typical values(nominal values at an air temperature of +20°C)Power, typical values(ambient temperature of 40°C at sea level and VSWR 1.0)Suitable for frequenciesShielding effectiveness

Environmental & Mechanical: Average Power *Minimum bend radius (MBR) single bend (installation) MHz WMinimum bend radius (MBR) dynamic useFlame resistanceFlammabilityConnectors

Data provided indicates nominal values unless stated otherwise and is only valid for reference purposes at the time of publication and is subject to change without prior notice.

1

2

3

4

5

6

7

8

9

10

11

12

4G

(in) (mm) Flexiform 401Reformable alternative to Flexiform 401semi-rigid coaxial cables Silver plated copper (1x1,60) 0.066 1,67

Solid extruded PTFE 0.208 5,30Offers the unique ability to Tin-soaked tin plated copper 0.250 6,40be hand-formed, no 110 kg/kmspecial tools required -65 / +180°C

31000-401-00 Flexiform 401 FJOutstanding shieldingproperties Flexiform 401 FJ

FPI 205, Blue 0.271 6,90Fluoropolymer jacket (FJ), 130 kg/kmhalogen free jacket (HFJ) -65 / +180°Cand alternative colours 31000-401-01also available Flexiform 401 HFJ

Flexiform 401 HFJHFS 80 T, Blue 0.299 7,60

130 kg/km-25 / +80°C

31000-401-02

50 ± 2 Ohmsnom 94 pF/m 400 15

70% 1000 254.8 ns/m 1800 36

2500 max 2000 385000 max 2400 42see table 3000 48

5000 66see table 10000 101

18000 147up to 18 GHz

typically <-130dB/m

single bend: 40mmmultiple bends: 120mm 400 1769passes IEC 60332-3-24 1000 1056

UL 94 V-0 1800 770As semi-rigid M17/129-RG 401 2000 728

2400 660*Average power Figures stated are for un-jacketed and FJ versions only 3000 587

5000 45010000 29418000 190

Ref: FF-eFF401-06Date: 2008-03-12Approved by:

Flexiform 401Re-formable Coaxial

®

www.habia.com world class solutions

Alternatives: Construction:

ConductorDielectricBraidWeightTemperature rating (°C)Order reference

JacketWeightTemperature rating (°C)Order reference

JacketWeightTemperature rating (°C)

Notes: Order referenceAll dimensions nominal (± 4%)unless otherwise stated.All dimensions in mm.

Electrical: AttenuationImpedance MHz dB/100mCapacitanceVelocity of signal propagationSignal delayWorking voltage, AC r.m.s.Working voltage, DCAttenuation, typical values(nominal values at an air temperature of +20°C)Power, typical values(ambient temperature of 40°C at sea level and VSWR 1.0)Suitable for frequenciesShielding effectiveness

Environmental & Mechanical: Average Power *Minimum bend radius (MBR) single bend (installation) MHz WMinimum bend radius (MBR) dynamic useFlame resistanceFlammabilityConnectors

Data provided indicates nominal values unless stated otherwise and is only valid for reference purposes at the time of publication and is subject to change without prior notice.

1

2

3

4

5

6

7

8

9

10

11

12

5G

Flexiform 401 LRe-formable Coaxial

(in) (mm) Flexiform 401 L‘Profiled’ low loss dielectric Flexiform 401 Loffers reduced insertion Silver plated copper (1x1,88) 0.074 1,88loss over the standard Profile-extruded PTFE 0.209 5,31Flexiform 401 reformable Tin-soaked tin plated copper 0.250 6,35coaxial cable range 85 kg/km

-65 / +180°COffers the unique ability to 31400-401-00 Flexiform 401 L FJbe hand-formed, nospecial tools required Flexiform 401 L FJ

FPI 205, Blue 0.271 6,90Outstanding shielding 100 kg/kmproperties -65 / +180°C

31400-401-01Fluoropolymer jacket (FJ), Flexiform 401 L HFJhalogen free jacket (HFJ) Flexiform 401 L HFJand alternative colours HFI 100, Blue 0.299 7,60also available 100 kg/km

-40 / +100°C31400-401-02

50 ± 1 Ohmsnom 84 pF/m 400 13

79% 1000 224.21 ns/m 1800 321250 max 2000 332500 max 2400 37see table 3000 43

4000 52see table 5000 58

6000 66up to 6 GHz

typically <-130dB/m

single bend: 40mmmultiple bends: 120mm 400 2000passes IEC 60332-3-24 1000 1190

UL 94 V-0 1800 870Modified semi-rigid M17/129-RG 401** 2000 820

2400 745*Average power Figures stated are for un-jacketed and FJ versions only 3000 660**Connectors Inner pin modified for the larger centre conductor 4000 570

required for lower attenuation 5000 5106000 460

®

Ref: FF-eFF401L-01Date: 2007-04-04Approved by:

www.habia.com world class solutions

Alternatives: Construction:

ConductorDielectricBraidWeightTemperature rating (°C)Order reference

JacketWeightTemperature rating (°C)Order reference

JacketWeightTemperature rating (°C)

Notes: Order referenceAll dimensions nominal (± 4%)unless otherwise stated.All dimensions in mm.

Electrical: AttenuationImpedance MHz dB/100mCapacitanceVelocity of signal propagationSignal delayWorking voltage, AC r.m.s.Working voltage, DCAttenuation, typical values(nominal values at an air temperature of +20°C)Power, typical values(ambient temperature of 40°C at sea level and VSWR 1.0)Suitable for frequenciesShielding effectiveness

Environmental & Mechanical: Average Power *Minimum bend radius (MBR) single bend (installation) MHz WMinimum bend radius (MBR) dynamic useFlame resistanceFlammabilityConnectors

Data provided indicates nominal values unless stated otherwise and is only valid for reference purposes at the time of publication and is subject to change without prior notice.

1

2

3

4

5

6

7

8

9

10

11

12

6G

(in) (mm) Flexiform 402 NMReformable alternative to Flexiform 402 NMsemi-rigid coaxial cables Silver plated copper (1x0,94) 0.037 0,94

Solid extruded PTFE 0.116 2,95Offers the unique ability to Tin-soaked tin plated copper 0.141 3,60be hand-formed, no 44 kg/kmspecial tools required -65 / +180°C

31000-402-03 Flexiform 402 NM FJOutstanding shieldingproperties Flexiform 402 NM FJ

FPI 205, Blue 0.161 4,10Fluoropolymer jacket (FJ), 52 kg/kmhalogen free jacket (HFJ) -65 / +180°Cand alternative colours 31000-402-04also available Flexiform 402 NM HFJ

Flexiform 402 NM HFJSteel conductors also HFI 100, Black 0.181 4,60available 53 kg/km

-40 / +100°C31000-402-33

50 ± 2 Ohmsnom 94 pF/m 400 25

70% 1000 414.8 ns/m 1800 57

2500 max 2000 605000 max 2400 67see table 3000 76

5000 102see table 10000 152

18000 215up to 18 GHz

typically <-130dB/m

single bend: 10mmmultiple bends: 40mm 400 686

passes IEC 60332-3-24 1000 419UL 94 V-0 1800 308

As semi-rigid M17/130-RG 402 2000 2912400 265

*Average power Figures stated are for un-jacketed and FJ versions only 3000 2365000 18210000 12218000 83

Ref: FF-eFF402-07Date: 2008-03-12Approved by:

Flexiform 402 NMRe-formable Coaxial

®

www.habia.com world class solutions

Alternatives: Construction:

ConductorDielectricBraidWeightTemperature rating (°C)Order reference

JacketWeightTemperature rating (°C)Order reference

JacketWeightTemperature rating (°C)

Notes: Order referenceAll dimensions nominal (± 4%)unless otherwise stated.All dimensions in mm.

Electrical: AttenuationImpedance MHz dB/100mCapacitanceVelocity of signal propagationSignal delayWorking voltage, AC r.m.s.Working voltage, DCAttenuation, typical values(nominal values at an air temperature of +20°C)Power, typical values(ambient temperature of 40°C at sea level and VSWR 1.0)Suitable for frequenciesShielding effectiveness

Environmental & Mechanical: Average Power *Minimum bend radius (MBR) single bend (installation) MHz WMinimum bend radius (MBR) dynamic useFlame resistanceFlammabilityConnectors

Data provided indicates nominal values unless stated otherwise and is only valid for reference purposes at the time of publication and is subject to change without prior notice.

1

2

3

4

5

6

7

8

9

10

11

12

7G

Flexiform 402 LRe-formable Coaxial

(in) (mm) Flexiform 402 L‘Profiled’ low loss dielectric Flexiform 402 Loffers reduced insertion Silver plated copper (1x1,02) 0.040 1,02loss over the standard Profile-extruded PTFE 0.116 2,95Flexiform 402 reformable Tin-soaked tin plated copper 0.141 3,60coaxial cable range 39 kg/km

-65 / +180°COffers the unique ability to 31400-402-00 Flexiform 402 L FJbe hand-formed, nospecial tools required Flexiform 402 L FJ

FPI 205, Blue 0.161 4,10Outstanding shielding 46 kg/kmproperties -65 / +180°C

31400-402-01Fluoropolymer jacket (FJ), Flexiform 402 L HFJhalogen free jacket (HFJ) Flexiform 402 L HFJand alternative colours HFI 100, Blue 0.181 4,60also available 49 kg/km

-40 / +100°C31400-402-02

50 ± 2 Ohmsnom 85 pF/m 400 23

78% 1000 384.3 ns/m 1800 52

1250 max 2000 552500 max 2400 61see table 3000 69

4000 81see table 5000 92

6000 105up to 6 GHz

typically <-130dB/m

single bend: 10mmmultiple bends: 40mm 400 740

passes IEC 60332-3-24 1000 459UL 94 V-0 1800 337

Modified semi-rigid M17/130-RG 402** 2000 3182400 289

*Average power Figures stated are for un-jacketed and FJ versions only 3000 256**Connectors Inner pin modified for the larger centre conductor 4000 219

required for lower attenuation 5000 1946000 175

®

Ref: FF-eFF402L-03Date: 2007-04-04Approved by:

www.habia.com world class solutions

Alternatives: Construction:

ConductorDielectricBraidWeightTemperature rating (°C)Order reference

JacketWeightTemperature rating (°C)Order reference

JacketWeightTemperature rating (°C)

Notes: Order referenceAll dimensions nominal (± 4%)unless otherwise stated.All dimensions in mm.

Electrical: AttenuationImpedance MHz dB/100mCapacitanceVelocity of signal propagationSignal delayWorking voltage, AC r.m.s.Working voltage, DCAttenuation, typical values(nominal values at an air temperature of +20°C)Power, typical values(ambient temperature of 40°C at sea level and VSWR 1.0)Suitable for frequenciesShielding effectiveness

Environmental & Mechanical: Average Power *Minimum bend radius (MBR) single bend (installation) MHz WMinimum bend radius (MBR) dynamic useFlame resistanceFlammabilityConnectors

Data provided indicates nominal values unless stated otherwise and is only valid for reference purposes at the time of publication and is subject to change without prior notice.

1

2

3

4

5

6

7

8

9

10

11

12

8G

(in) (mm) Flexiform 405 NMReformable alternative to Flexiform 405 NMsemi-rigid coaxial cables Silver plated copper (1x0,56) 0.022 0,56

Solid extruded PTFE 0.066 1,70Offers the unique ability to Tin-soaked tin plated copper 0.086 2,20be hand-formed, no 15 kg/kmspecial tools required -65 / +180°C

31000-405-03 Flexiform 405 NM FJOutstanding shieldingproperties Flexiform 405 NM FJ

FPI 205, Blue 0.102 2,60Fluoropolymer jacket (FJ), 18 kg/kmhalogen free jacket (HFJ) -65 / +180°Cand alternative colours 31000-405-04also available Flexiform 405 NM HFJ

Flexiform 405 NM HFJSteel conductors also HFS 80 T, Blue 0.125 3,20available 21 kg/km

-25 / +80°C31000-405-05

50 ± 2 Ohmsnom 94 pF/m 400 43

70% 1000 704.8 ns/m 1800 97

1500 max 2000 1023000 max 2400 113see table 3000 127

5000 172see table 10000 249

18000 346up to 18 GHz

typically <-130dB/m

single bend: 6mmmultiple bends: 25mm 400 253

passes IEC 60332-3-24 1000 157UL 94 V-0 1800 116

As semi-rigid M17/133-RG 405 2000 1102400 100

*Average power Figures stated are for un-jacketed and FJ versions only 3000 895000 6910000 4718000 33

Ref: FF-eFF405-06Date: 2007-04-04Approved by:

Flexiform 405 NMRe-formable Coaxial

®