SIDE FILERJOT STORAGE

Unit FeaturesCarcass: 18 gauge steel with a double skin formation for rigidity. Monocoque frame. Drawers: Drawer boxes are full height to the front, back and sides allowing the drawer to be used as a filing frame, divided drawer or storage bin. Drawer boxes are formed from 20 gauge steel and are painted black. Each front has two label holders.Levelling: Floor levelling feet supplied.Handles: “Letterbox” handle which is designed ergonomically to allow finger entry to the side of the handles.Components: 20swg inner panels incorporate 12.7mm slot centres to enable full range of internal components to be fitted.

DimensionsHeights: 695mm, 720mm, 997mm, 1073mm, 1302mmHeights (with MFC top): 695mm and 720mmWidths: 800mm and 1000mmDepth: 500mm

ComponentsCounterbalance weights, 12”/15” drawer dividers (3), front to back file frame set (single), 6” drawer dividers (3), 9” drawer dividers (3)

DeliveryThese units are delivered pre-assembled.

Tested ToBS 4875-7:2006, BS EN 14074:2004, BS EN 14073-3:2004BS EN 14073-2:2004

www.flexiform.co.uk

MaterialsMFC Top Panels: 25mm melamine faced chipboard (M.F.C) with 2mm ABS matching edging. British standard 476 class 1 surface spread of flame. Meets E1 European standards on Formladehyde emissions. Steel: Powder coated steel with minimum paint coverage thickness of 35 Microns. Indentation, cross cut+adhesion and bend tested. FinishesStandard Flexiform finishes. Huge selection available which may incur an upcharge.

MFC: Light Oak (MOK), White (WHM), Beech (MOB), Maple (MOM), Grey (MOG), Walnut (MOW), Romano Cherry (RCM).

Steel: RAL 9011 Silver (JOS), RAL 7024 Graphite (GGS), RAL 7035 Pale Grey (PGS) and RAL9016 White (JWS).

Recyclable Content94% recyclable.

Warranty15 years from installation.

Jot Side Filer

H: 1302mm H: 1302mmH: 1607mm H: 1607mm

H: 1302mm H: 1302mm

H: 1302mm H: 1302mm

H: 1073mm H: 997mm H: 997mmH: 1302mm

H: 997mm H: 997mm H: 740mm

H: 695mm

H: 720mm

H: 720mmH: 720mm

H: 720mmH: 997mm *

*

*

*

*

*