Ancon Fixing Solutions
-
Upload
jessi-johnson -
Category
Documents
-
view
18 -
download
0
description
Transcript of Ancon Fixing Solutions
-
Ancon Fixing Solutionsfor the Construction Industry
CI/SfB Xt6
December 2014
-
Ancon AustriaViennaAncon GermanyNurembergAncon SwitzerlandNear Bern
Ancon UAEDubai
For more information on Anconsproducts and services please [email protected],call +44 (0) 114 275 5224 or visit:
www.ancon.co.ukwww.anconbp.de
www.ancon.ch
www.ancon.at
www.ancon.ae
www.ancon.com.au
www.ancon.co.nz
Ancons origins date back to 1882 when steel fabrication company George Clarkwas founded in Sheffield, England. The Ancon name came from Ancon StainlessSteel Fixings which was founded in 1971 and merged with George Clark in 1993.
The companys 72,000ft2 head office and main manufacturing site is still located inthe city of Sheffield, world renowned as the traditional centre of the stainless steelindustry. Today, Ancon has over 400 employees at three UK manufacturing sites andnine overseas operations located in New Zealand, Australia, United Arab Emirates,Germany, Switzerland and Austria.
Ancons UK sites are capable of producing a high volume ofstandard products on very short lead times, and bespokeproducts specifically engineered to meet individual projectrequirements.
On a daily basis, Ancons technical staff liaise with projectteams throughout the world, advising on the most cost-effective and practical construction solutions.
The companys impressive project portfolio includes:
The Shard, UK Ferrari World, Abu Dhabi Brisbane Airport Link Road, Australia Thessaloniki Metro, Greece Stade de Suisse, Switzerland
About Us
Ancon Head Office, Sheffield, South Yorkshire, UK
Ancons management systems comply withISO 9001, ISO 14001 and OHSAS 18001.Products are CE marked where relevant.
Ancon designs and manufactures high integrity steel products for the construction industry, supplyingcustomers worldwide in a variety of sectors from small-scale residential developments to majorinfrastructure projects.
Ancon UKSheffield (Head Office)and Deeside
2
-
Ancon AustraliaSydney, Brisbane,Melbourne and Perth
Ancon New ZealandChristchurch
Products for Brick, Block & Stone pages
Support Systems
Lintels
Windposts & Parapet Posts
Masonry Reinforcement
Channel & Bolt Fixings
Wall Ties & Restraint Fixings
Additional Stainless Steel Solutions page
Special Fabrications
Flooring
Formed Sections
Products for Structural Concrete pages
Shear Load Connectors
Punching Shear Reinforcement
Reinforcing Bar Couplers
Reinforcement Continuity Systems
Thermal Breaks
Stainless Steel Reinforcement
Corner Guards
Architectural Metalwork page
Tension Systems
Compression Systems7
8-10
11
Deeside Manufacturing Facility, North Wales, UK
4-6
Wire/Coil MachiningLaser Cutting Plate
Corporate Social ResponsibilityAncon is committed to ethically andresponsibly managing all aspects of itsoperations. Read exactly what this meansin practice in the Ancon CSR report.
3
-
Products for Brick, Block & Stone
Individual Support Brackets
Channel & Bolt Fixings
Lintels
AnconOptima Masonry SupportPatent No. EP 1211364
Horizontal SupportMasonry Support SystemsBoth AnconOptima and the Ancon MDC systemprovide a continuous angle in the externalmasonry leaf. AnconOptima is a standardsystem, available from stock. MDC systems aredesigned to suit specific applications.
Ancon MDA Individual Brackets are ideal for thesupport of soldier courses, or brickwork whichis either curved on plan or arched.
Stonework supports include corbel angles andadjustable individual brackets.
Masonry Support Systems can now besupplied with Thermal Breaks to minimise heatloss through cold bridging, and improve theenergy efficiency of your building project.
LintelsThe Ancon lintel range suits the majority of wallconstructions and load conditions. Speciallintels can be manufactured to suit architecturalfeatures and non-standard applications.
Channel & Bolt FixingsA wide range of channels and bolts areavailable to fix stainless steel masonry supportsand restraints to any type of structural frame.
Thermal Breaks
4
-
Windposts
furtheri
nfor
mat
ion&
serv
ices
Tel: +44 (0) 114 275 5224www.ancon.co.uk
Technical Advice CPD Seminars Masonry Panel Design Service Value-Engineered Solutions NBS Plus Specification Details CAD Profiles / BIM Objects Layout Drawings Project Management Installation Guidance Technical Literature Online Resource 24-7 CE Marking
Masonry ReinforcementAncon AMR masonry reinforcement locatesin the bed joint. The longitudinal wires areflattened to less than 3mm. Standardconfigurations suit a wide range ofstructural load conditions and wall widths.
Windposts & Parapet PostsAncon Windposts span vertically betweenfloors. Profiles include channel and anglesections. They are designed to suit specificapplications and are supplied complete withall end connections and wall ties.
MasonryReinforcement
StrengtheningMasonry Panels
5
-
Tel: +44 (0) 114 275 5224www.ancon.co.uk
furtheri
nfor
mat
ion&
serv
ices
Technical Advice NBS Plus Specification Details Product Approvals CAD Profiles / BIM Objects Distributor Sales Support Technical Literature Installation Guidance Online Resource 24-7 Interactive Product Selector iPhone / Android App CE Marking
Masonry Passivhaus Development,West Yorkshire
Stone Restraints
Wall Ties & Other RestraintFixingsAncon manufactures wall ties in a variety oflengths and types for restraining brick, blockand stone. These restraints can be designed tofix to concrete and structural steel as well asany type of masonry.
The standard wall tie range includes solutionsfor traditional brick-to-block, thin-jointblockwork, cellular clay blockwork, timber frameand light steel studding. Many products,including those from the Staifix range, can bedelivered in 24 hours and are held in stock bydistributors.
The range also includes TeploTie basalt fibrewall ties, warm roof batten fixings and productsfor remedial work including a crack stitching kit.
Green
BuildingStore
Masonry Restraints
6
-
furtheri
nfor
mat
ion&
serv
ices
Technical Advice CPD Seminars Design Services Product Approval NBS Plus Specification Details CAD Profiles / BIM Objects Project Management Installation Guidance Technical Literature Online Resource 24-7 Interactive Product Selector CE Marking
Tel: +44 (0) 114 275 5224www.ancon.co.uk
Electro-polishedTension System
Satin-polishedTension System
Hand-polishedTension System
Hand-polishedCompression System
Architectural Metalwork
Tension & Compression SystemsIn addition to providing a high load capacity,these stylish Ancon systems meet thedemanding aesthetic requirements of todaysarchitectural applications. Both systems areavailable in carbon and stainless steel in avariety of sizes and finishes including handpolished.
Components combine to create fixingsolutions for staircases, canopies, timbers andlarge areas of glazing.
Tension Systems comprise high strength bar,fork connectors, locking nuts, couplers andanchor discs.
Compression Systems comprise high strengthtubes, fork connectors and locking nuts.
Tension System Approval
DarcySchack
JAMPhotographicsLtd
7
-
Technical Advice CPD Seminars Design Services Project Management Installation Guidance CAD Profiles Technical Literature Design Software Online Resource 24-7
DSD Shear Load Connector
Punching Shear ReinforcementAncon Shearfix consists of double-headedstuds welded to flat rails. It is used withina slab to provide additional reinforcementaround columns, protecting the slab fromthe effects of punching shear.Free design software is available.
Products for Structural Concrete
Accommodating Shear
Punching Shear Reinforcement
MultiJointPatent No. EP1756367
Lockable DowelPatent pending
Tel: +44 (0) 114 275 5224www.ancon.co.uk
furtheri
nfor
mat
ion&
serv
ices
8
Shear Load ConnectorsInstalled at expansion and contraction joints,Ancon shear load connectors are more effectiveat both transferring load and accommodatingmovement than plain dowel bars. Eachconnector is a two-part assembly, comprisinga sleeve and a dowel component. Products areavailable for joints in ground bearing andsuspended slabs. Free design software isavailable.
The range includes a unique Lockable Doweldesigned for use at temporary movement jointsin post-tensioned concrete frames.
-
Reinforcement ContinuitySystemsAncon Eazistrip consists of pre-bent barshoused within a galvanised steel casing. Onceinstalled, the protective cover is removed andthe bars are straightened.
Ancon Starter Bars are supplied fixed to anAncon coupler. Once cast in concrete, thecouplers end cap is removed and a taperedthread continuation bar is installed with acalibrated torque wrench to complete theconnection.
The latest addition to the range is the AnconKSN Threaded Anchor, which minimisescongestion in a wall. Connection to the anchorcan be made with either a Bartec threaded baror a metric bolt.
Reinforcing Bar CouplersCouplers can be used to replace long bars,simplify design details, reduce rebar congestionand accelerate the speed of construction.The Ancon range includes parallel threaded,tapered threaded, mechanically bolted andgrouted couplers. Stainless steel couplers arealso available.
Tapered ThreadReinforcing Bar Couplers
Continuity of Reinforcement
Technical Advice CPD Seminars Project Management Distributor Sales Support Product Approvals Installation Guidance Technical Literature Online Resource 24-7
Tel: +44 (0) 114 275 5224www.ancon.co.uk
furtheri
nfor
mat
ion&
serv
ices
Reinforcement Continuity System
MBT ETBolted Coupler
KSN Threaded Anchor and BartecContinuation Bar
Tapered-ThreadStarter Bar System
9
-
Stainless Steel Bar
Thermal BreaksThese systems are used to minimise coldbridging at balcony locations where structuralconnections pass through the insulated buildingenvelope. They provide a thermal break byinserting a material with a low thermalconductivity between elements with a higherconductivity and most also provide localinsulation at the joint. As critical structuralcomponents, these Ancon insulated connectorsalso transfer moment, shear, tension andcompression forces. Standard solutions areavailable for concrete-to-concrete, steel-to-concrete and steel-to-steel interfaces.
Corner GuardsAncon Corner Guards protect exposed edges ofcolumns and walls in areas of high traffic, suchas car parks and warehouses. Where aestheticsare important, stainless steel corner guards canbe supplied with a satin-polished surface finish.
Reinforcing BarAncon supplies stainless steel plain and ribbedbar direct from stock. Bars can be supplied cutto length, bent and threaded to suit anyapplication.
Engineered Bar Solutions
Thermal Breaks at Balcony Locations
Stainless Steel Reinforcement
Technical Advice CPD Seminars Design Services Value-Engineered Solutions CAD Drawings Project Management Installation Guidance Technical Literature Online Resource 24-7
Tel: +44 (0) 114 275 5224www.ancon.co.uk
furtheri
nfor
mat
ion&
serv
ices
10
STC Steel-to-Concrete ConnectorSTS Steel-to-Steel Connector
-
Technical Advice Design Services Value-Engineered Solutions Project Management Technical Literature Project Portfolio Online Resource 24-7 CE Marking
Tel: +44 (0) 114 275 5224www.ancon.co.uk
Special FabricationsAncon has a wealth of experience of workingwith different types and grades of stainlesssteel, and produces special fabrications to suitindividual customer requirements. Both one-offand volume orders have been supplied tovarious industries such as Building,Infrastructure, Water Treatment, Nuclear andMining. Ancon has a particularly impressiveproject portfolio in the Tunnelling Industry.
The company is certified to undertake weldedfabrication work to Execution Class 2 ofBS EN 1090-1, the European Standardgoverning structural steelwork. This ExecutionClass covers the vast majority of buildingapplications and is the default class whenunspecified.
Stainless SteelFlooring
Tunnel Ceiling Suspension Systems
Road Deck Endplates
Additional Stainless Steel Solutions
Special Fabrications
furtheri
nfor
mat
ion&
serv
ices
11
-
Ancon Building Products 2014
The construction applications and details provided in this literature are indicative only. In every case, project workingdetails should be entrusted to appropriately qualified and experienced persons.
Whilst every care has been exercised in the preparation of this document to ensure that any advice, recommendations orinformation is accurate, no liability or responsibility of any kind is accepted in respect of Ancon Building Products.
With a policy of continuous product development Ancon Building Products reserves the right to modify product designand specification without due notice.
These products are available from:
Masonry Support Systems
Lintels
Masonry Reinforcement
Windposts and Parapet Posts
Wall Ties and Restraint Fixings
Channel and Bolt Fixings
Tension and Compression Systems
Insulated Balcony Connectors
Shear Load Connectors
Punching Shear Reinforcement
Reinforcing Bar Couplers
Reinforcement Continuity Systems
Stainless Steel Fabrications
Flooring and Formed Sections
Refractory Fixings
Ancon Building Products98 Kurrajong AvenueMount DruittSydney NSW 2770AustraliaTel: +61 (0) 2 8808 3100Fax: +61 (0) 2 9675 3390Email: [email protected]: www.ancon.com.au
Ancon Building Products2/19 Nuttall DriveHillsboroughChristchurch 8022New ZealandTel: +64 (0) 3 376 5205Fax: +63 (0) 3 376 5206Email: [email protected]: www.ancon.co.nz
Ancon (Schweiz) AGGewerbezone Widalmi 103216 Ried bei KerzersSwitzerlandTel: +41 (0) 31 750 3030Fax: +41 (0) 31 750 3033Email: [email protected]: www.ancon.ch
Ancon Building ProductsGesmbHPuchgasse 1A-1220 ViennaAustriaTel: +43 (0) 1 259 58 62-0Fax: +43 (0) 1 259 58 62-40Email: [email protected]: www.ancon.at
Ancon GmbHBartholomusstrasse 2690489 NurembergGermanyTel: +49 (0) 911 955 1234 0Fax: +49 (0) 911 955 1234 9Email: [email protected]: www.anconbp.de
Ancon Building ProductsPresident Way, President ParkSheffield S4 7URUnited KingdomTel: +44 (0) 114 275 5224Fax: +44 (0) 114 276 8543Email: [email protected]: www.ancon.co.ukFollow on Twitter: @AnconUK
Ancon (Middle East) FZEPO Box 17225Jebel AliDubaiUnited Arab EmiratesTel: +971 (0) 4 883 4346Fax: +971 (0) 4 883 4347Email: [email protected]: www.ancon.ae