Fivalco INC. HVAC Catalogue - EVALC · HVAC Catalogue Iron And Bronze Valves 12/2009 ... Fivalco...

Fivalco INC. < HVAC CatalogueIron And Bronze Valves 12/2009

© CopyRight Fivalco 2008

Fivalco® General Information

Fivalco cast Iron and Ductile Iron Valves are manufactured using advanced equipment in a world class facility using the finest materials available. Designed by a first class team of dedicated valve specialists with many years experience in the industry. Manufacturing facilities are certified to ISO 9001-2000 and Equipment includes CNC machines and a full test laboratory with a spectrometer.Other facility approvals – PED (DNV), AGA (Aus.)

Primary Materials

4 Cast IronCast Iron Valves are manufactured from materials fully conforming to ASTM A126 Class B / BS EN 1561 EN-JL1040 / DIN GG25.

4 Ductile IronDuctile Iron Valves are manufactured from Ductile Iron conforming to ASTM A536 Gr. 65-45-12 / BS EN 1563 EN-JS1050 / DIN GGG40/50 for greater strength and improved resistance to internal pressures.

4 Seats and Seat Rings Manufactured from bronze fully conforming to ASTM B62 C83600 / BS EN1982 CC491K, brass fully conforming to ASTM B16 C36000 / EN CuZn39Pb3.

Installation and Operation

4 Flanges conform fully to ANSI B16.1 Class125 / ANSI B16.2 Class250 or EN1092-2 PN10/ PN16/PN25, Mechanical joint ends conform to AWWA C111/ANSI A21.11

Other flange types are available for specific market requirements. Grooved end valves are available with Metric and ANSI pipe grooved ends4 Butterfly valves are designed for throttling service and are available in Wafer, Lug, Flanged and Grooved end

configurations.4 Gate valves are recommended for infrequent service and are primarily designed as shut off valves. Not

recommended for throttling service.4 Globe valves may be used for throttling services.4 Check valves are used to prevent backflow of fluids and contamination of piping systems.4 Strainers are available to ANSI and European standards.

Top Flanges on Butterfly Valves conform to ISO 5211/1

12/2009

Fivalco® Product Index

IRON AND BRONZE VALVES

DESCRIPTION FIGURE NUMBER PAGEBUTTERFLY VALVES 4 Wafer Butterfly Valve 2302/2303/2304 ................................. 14 Lug Butterfly Valve 2502/2503/2504 ................................. 24 Grooved End Butterfly Valve 2902 ................................................... 34 U Type Butterfly Valve 2800/2801/2802 ................................. 4 4 Lever Handles and Gear Operators ........................................................... 54 Gear Actuator with Tamper Switch ........................................................... 6

GATE VALVES 4 MSS SP-70 Class 125 / BS 5150 PN16 OS&Y Type Flanged Ends 3193/3194 .......................................... 74 MSS SP-70 Class 125 / BS 5150 PN16 NRS Type Flanged Ends 3183/3184 .......................................... 84 OS&Y Type Gate Valve BS & MSS 3113/3114 ........................................... 94 NRS Type Gate Valve BS & MSS 3123/3124 .......................................... 104 NRS Type Gate Valve DIN3352 3126 ................................................... 11

GLOBE VALVES 4 Globe Valve BS EN 13789 / MSS SP-85 6123 .................................................. 12

CHECK VALVES 4 Swing Check Valve EN 12334/BS 5153/MSS SP-71/AWWA C508 5101/5102 .......................................... 134 Wafer Double Door Check Valve PN16/Class125 5306 ................................................... 14

BALANCING VALVES 4 Balancing Valve 1209/1210 .......................................... 15

STRAINER 4 Y-Strainer 7101/7102 .......................................... 164 Y-Strainer DIN 3202 7103/7107 .......................................... 17

Pressure Temperature Chart 18

BRONZE VALVES4 Bronze Balancing Valve BALV-1 ............................................... 194 Bronze Ball Valve(Threaded) BBV-1 ................................................. 264 Bronze Gate Valve (Threaded) BGV-1 ................................................. 274 Bronze Gate Valve (Threaded) BGV-2 ................................................. 284 Bronze Globe Valve (Threaded) GL-1 ................................................... 294 Bronze Globe Valve (Threaded) GL-2 ................................................... 304 Bronze Swing Check Valve (Threaded) BCV-1 ................................................. 314 Bronze Strainer (Threaded) BS-1 ................................................... 324 Bronze Ball Valve+ Strainer (Threaded) BBVS-1 ............................................... 334 Bronze Pressure Reducing Valve(Loose Joint) BPRV-1 ............................................... 34

Flow Control

Fivalco®

-1-

Wafer Butterfly ValvePN16/PN20/PN25/Class125/150/250

Fig. 2302-SS Disc.Fig. 2303-Bronze Disc.Fig. 2304-DI Disc.

w Valve StandardsComplies with EN593/BS5155/MSS SP-67

w Working Pressure and TemperatureSize 50 to 600, working pressure PN16/Class125.Size 50 to 300, working pressure PN20/Class150.Size 50 to 300, working pressure PN25/Class250.Temperature from -10℃ to 120℃ for EPDM liner.Temperature from -10℃ to 82℃ for NBR liner. Temperature from -10℃ to 150℃ for Viton liner.

w Top Flange: Complies with ISO5211/1.

w Flange TypesEN1092-2 PN10/PN16/PN25, ANSI B16.1 Class125,ANSI B16.2 Class250, BS10 Table D/E, JIS 10K/16K.

w Operator: Handle or gear operator.

w Materials Specifications

Note*: Ductile iron body for valve pressure rating PN20/PN25 or Class150/250.

w Dimensions (mm)

Size 50/2” 65/2.5” 80/3” 100/4” 125/5” 150/6” 200/8” 250/10” 300/12” 350/14” 400/16” 450/20” 500/22” 600/24”

A 161 175 181 200 215 225 241 296 336 368 400 422 480 562B 80 91 95 115 134 138 174 198 234 280 310 340 388 450C 30 30 30 30 30 30 30 30 30 45 45 45 45 45D 90 90 90 90 90 90 125 125 125 150 175 175 210 210E 43 45 46 51.5 56 56.5 60 68.5 79.5 78 88 109 127 154Φ 56.8 71.5 83 101.5 127.8 151.1 200.5 251.3 300.5 335.5 393.5 443.5 500.5 600.8

SxS 11x11 14x14 17x17 22x22 27x27 φ48

Part Name Material EN Spec. ASTM Spec.Body* Cast Iron EN-JL1040 A126 Class B

Shaft Stainless SteelBS970420S37

AISI 420

Disc

Stainless SteelBS970304S15

A351 CF8

BronzeEN1982CC491K

B62 C83600

Ductile Iron Chrome Plated or FBE

CoatedEN-JS1050

A53665-45-12

Bushing PTFE Commercial CommercialLiner EPDM/NBR/Viton Commercial Commercial

O-Ring EPDM/NBR/Viton Commercial Commercial

Size 50-300

Size 350-600

Fivalco®

-2-

Lug Butterfly ValvePN16/PN20/PN25/Class125/150/250

Fig. 2502-SS Disc.Fig. 2503-Bronze Disc.Fig. 2504-DI Disc.

Note*: Ductile iron body for valve pressure rating PN20/PN25 or Class150/250.

w Dimensions (mm)

Size 50/2” 65/2” 80/3” 100/4” 125/5” 150/6” 200/8” 250/10” 300/12” 350/14” 400/16” 450/18” 500/20” 600/24”

A 140 152 160 180 191 202 241 274 315 368 400 422 480 562B 68 76 85 100 120 132 160 200 230 280 310 340 388 450C 30 30 30 30 30 30 30 30 30 45 45 45 45 45D 90 90 90 90 90 90 125 125 125 150 175 175 210 210E 43 45 46 51.5 56 56.5 60 68.5 79.5 78 88 109 127 154Φ 56.8 71.5 83 101.5 127.8 151.1 200.5 251.3 300.5 335.5 393.5 443.5 500.5 600.8

SxS 11x11 14x14 17x17 22x22 27x27 φ48

w Valve StandardsComplies with EN593/BS5155/MSS SP-67.

w Working Pressure and TemperatureSize 50 to 600, working pressure PN16/Class125.Size 50 to 300, working pressure PN20/Class150.Size 50 to 300, working pressure PN25/Class250.Temperature from -10℃ to 120℃ for EPDM liner.Temperature from -10℃ to 82℃ for NBR liner. Temperature from -10℃ to 150℃ for Viton liner.



w Operator: Handle or gear operator.


Part Name Material EN Spec. ASTM Spec.Body* Cast Iron EN-JL1040 A126 Class BShaft Stainless Steel BS970 420S37 AISI 420

Disc

Stainless Steel BS970 304S15 A351 CF8

BronzeEN1982CC491K

B62 C83600

Ductile Iron Chrome Plated or

FBE CoatedEN-JS1050

A53665-45-12

Bushing PTFE Commercial CommercialLiner EPDM/NBR/Viton Commercial Commercial

O-Ring EPDM/NBR/Viton Commercial Commercial

Size 50-300

Size 350-600

Fivalco®

-3-

Grooved End Butterfly ValvePN20/Class150 Fig. 2902

w Valve Standards: Complies with EN593/BS5155/MSS SP-67.

w Working Pressure and TemperatureWorking pressure PN20/Class150. Temperature from -10℃ to 120℃ for EPDM coated disc.Temperature from -10℃ to 82℃ for NBR coated disc. Temperature from -10℃ to 150℃ for Viton coated disc.


w Grooved TypeGrooved dimensions comply with Metric or ANSI Pipe standards

w OperatorHandle or gear operator.

Part Name Material EN Spec. ASTM Spec.Body Ductile Iron EN-JS1050 A536 65-45-12Shaft Stainless Steel BS970 420S37 AISI 420

DiscDI EPDM Coated EN-JS1050 A536 65-45-12DI NBR Coated EN-JS1050 A536 65-45-12DI Viton Coated EN-JS1050 A536 65-45-12

Bushing PTFE Commercial CommercialO-Ring EPDM/NBR/Viton Commercial Commercial

w Dimensions (mm)

Size 50/2” 65/2.5” 80/3” 100/4” 125/5” 150/6” 200/8” 250/10” 300/12”Pipe OD 60.3 73.0/76.1 88.9 114.3 139.7/141.3 165.1/168.3 219.1 273.0 323.9

A 122 140 147 177 204 215 245 295 320B 77 85 90 108 120 145 180 230 260C 30 30 30 30 30 30 30 30 30D 90 90 90 90 90 90 125 125 125E 84 97 97 116 148 148 133 159 165

Size 50-300


Fivalco®

-4-

U-Type Butterfly ValvePN10/PN16/Class125

w Design Standards:Complies with EN593, MSS SP-67Flange Type: EN1092-2 PN16

w Maximum pressure: 16 bar Working Temperature from -15ºC to 120ºC (EPDM)

Fig.2800 -DI Disc/EpoxyFig.2801- SS 304 DiscFig. 2802 -SS 316 Disc


Part Name Material Material Specification

Body Ductile IronASTM A536 65-45-12

JS1030,EN1563

Shaft Stainless SteelAISI 431EN10088

DiscStainless Steel AISI 304/316

Ductile IronEpoxy coated

ASTM A536 65-45-12 JS1030,EN1563

Seat EPDM/NBR CommercialO-Ring NBR Commercial

w Dimensions(mm)

SizemmIn

700 (28)

750(30)

800(32)

900(36)

1000(40)

1050(42)

1100(44)

1200(48)

1300(52)

1400(56)

1500(60)

1600(64)

1700(68)

Lmm 165 190 190 203 216 216 235 254 279 279 318 318 337in 6-1/2 7-1/2 7-1/2 8 8-1/2 8-1/2 9-1/4 10 11 11 12-1/2 12-1/2 13-1/4

Dmm 480 520 525 635 685 690 820 870 920 980 1037 1096 1140in 18-7/8 20-1/2 20-3/4 25 27 27-1/8 32-1/4 34-1/4 36-1/4 38-1/2 40-3/4 43-1/4 44-7/8

Emm 560 585 610 690 740 740 805 855 955 955 1029 1079 1126in 22 23 24 27-1/4 29-1/8 29-1/8 31-3/4 33-5/8 37-1/2 37-5/8 40-1/2 42-1/2 44-3/8

Gmm 60 60 60 90 90 90 85 85 85 85 100 100 120in 2-3/8 2-3/8 2-3/8 3-9/16 3-9/16 3-9/16 3-3/8 3-3/8 3-3/8 3-3/8 4 4 4-3/4

ISO 5211 F16 F16 F16 F25F25F30

F25 F30F30F35

F30F35

F35 F35F35F40

F40

Notes:1. Face to Face dimensions conform to EN558-Series 20. 2. Bolt circles and flange drillings conform to EN1092-2 PN16 Other flange types are available.3. Design, dimensions and material specifications are subject to change without notice.4. Maximum liquid flow velocity 5 m/s5. Specify ISO top flange dimensions on order.

Fivalco®

-5-

Lever Handles and Gear Operators

w Dimensions (mm)

Valve Size Part Number T DN50~ DN150 2000 - S 263DN200~DN250 2000 - M 326

DN300 2000 - L 415

w Dimensions (mm)

Valve Size Part Number T DN50~ DN150 2001 - S 260DN200~DN250 2001 - M 325

DN300 2001 - L 400

w Dimensions (mm)

Valve Size 50~150 200~250 300~350 400~450 500~600Part No. 2000-24 2000-30 2000-50 2000-80 2000-70

Ratio 24:1 30:1 50:1 80:1 70:1L 160 238 226 266 241H 65 85 95 121 118D 195 297 297 388 388E 108 153 161 252 264C 130 177 198 281 303

w Output Torque Max. (N.m)

Part No. 2000-24 2000-30 2000-50 2000-80 2000-70Ratio 24:1 30:1 50:1 80:1 70:1

Output Torque Max. 270 700 1200 2000 4500

w Materials Specification

Part Name Material EN Spec. ASTM Spec.Housing Cast Iron EN-JL1040 A126 Class B

Cover Cast Iron EN-JL1040 A126 Class BWorm Carbon Steel BS970 060A47 AISI 1045

Worm Gear Ductile Iron EN-JS1050 A536 65-45-12Shaft Carbon Steel BS970 060A47 AISI 1045

Handwheel Cast Iron EN-JL1040 A126 Class B

Ductile Iron Lever Handle

Steel Lever Handle, FBE Coated

Gear Operator

Fivalco®

-6-

Gear Actuator with Tamper Switch

Design and Installation

w Design requirementsFivalco butterfly valve should be connected to the piping system with approved couplings or flanges. Flow may be from either direction, and the valves may be positioned in any direction.Fivalco butterfly valves have been designed with a slow close hand-wheel operator, which effectively minimizes water hammer. These valves feature minimum flow restriction and pressure loss when in the fully open position.

w InstallationWhen the valves are received from the manufacturer they should be handled carefully to avoid breakage and damage to the seating area. Before installation of the valves, clean piping, flange and coupling. When the valves close hard, it is usually due to debris lodged in the seating area. Often this may be corrected by backing off the hand-wheel and closing again.The valve should never be forced to seat by applying a wrench to the handwheel as this may distort the valve components or score the sealing surface. Care must be taken to align wafer valves cor-rectly so that the disc operation to the fully open position will not be obstructed. The use of excessive force to open or close the valve violates all warranties whether express or implied.The inlet and outlet pipe adjacent to the valve should be properly supported to prevent excessive stress on the valve body. The valve should not be used to force a pipeline into position as this may result in distortion of the valve body.

w Care and MaintenanceFivalco butterfly valves require no regular maintenance, however, it is advisable to inspect and verify proper operation of the unit annually or in accordance with the requirements of the authority having jurisdiction.The inspection should include a visual check for leakage at the valve pipe connection and body to operator connection. Inspection and main-tenance should be performed by a qualified inspection service.

w Switch InstallationFivalco butterfly valves are provided with internal supervisor position switches. The tamper switch operates by a cam con-nected to the valve stem. The switch will change position and close with two (2) full turns of the handwheel from the fully open position.

w Switch 1# For connection to the supervi-sory circuitNormally Open: 1 Yellow Normally Closed: 1 Red Common: 1 White

w Switch 2#Auxiliary switch connected per authorityNormally Open: 1 BlueNormally Closed: 1 OrangeCommon: 1 BlackGround Lead: 1 Green

SWITCH WIRE OPTION

w Dimensions (mm)

Valve Size Part Number H D L K WDN50~ DN150 S2000 - 40 100 120 115 145 110DN200~DN300 S2000 - 50 115 170 162 200 165

w Materials Specification

Part Name Material EN Spec. ASTM Spec.Housing Cast Iron EN-JL1040 A126 Class BCover Cast Iron EN-JL1040 A126 Class BWorm Carbon Steel BS970 060A47 AISI 1045

Worm Gear Ductile Iron EN-JS1050 A536 65-45-12Shaft Stainless Steel BS970 420S37 AISI 420

Handwheel Cast Iron EN-JL1040 A126 Class B

Fivalco®

-7-

OS&Y Gate valveMSS SP-70 Class 125 /BS 5150 PN16 Type Flanged Ends

Fig. 3193-Brass Stem.Fig. 3194-SS Stem.

w Valve Standards: Complies with BS 5150 (EN 1171) & MSS SP-70.

w Working Pressure and Temperature:

Size 50 to 300,working pressure PN16/Class125 Size 2"-12",working pressure 125WSP/200WOGTemperature from -10℃ to 120℃ Suitable Media:Water ,Oil ,Gas.

w Flange Types

EN1092-2 PN10/PN16, ANSI B16.1 Class125,BS10 Table D/E, JIS 10K/16K.

w Operator: Handwheel or gear operator.


Part Name Material EN Spec. ASTM Spec.

Body Ductile Iron EN-GJS-500-7 A536 65-45-12

Body Trim Bronze EN1982 CC491K B62 C83600

Wedge Trim Bronze EN1982 CC491K B62 C83600

Wedge Ductile Iron EN-GJS-500-7 A536 65-45-12

Stem Nut Bronze EN1982 CC491K B62 C83600

Stem SS BS970 420S37 AISI 410

Bonnet Ductile Iron EN-GJS-500-7 A536 65-45-12

Gasket EPDM Commercial Commercial

Yoke Ductile Iron EN-GJS-500-7 A536 65-45-12

Packing Graphite Non-asbestos Non-asbestos

Handwheel Ductile Iron EN-GJS-500-7 A536 65-45-12

w Dimensions (mm)

Size 50/2” 65/2.5” 80/3” 100/4” 125/5” 150/6” 200/8” 250/10” 300/12”

L 178 191 203 229 254 267 292 330 356

H(Open) 405 415 486 632 710 842 1100 1228 1373

DBS 190 190 190 305 305 305 305 405 405

ANSI 178 178 190 250 307 300 356 400 457

Notes:1.Conforms to BS5150, MSS SP-70.2.Flanged machined and drilled to BS4504 PN16 or ANSI B16.1 125#,other flange types are available. 3.Design&materials are subject to change without notice.

Fivalco®

-8-

NRS Gate valveMSS SP-70 Class 125 /BS 5150 PN16 Type Flanged Ends



w Working Pressure and Temperature:

Size 50 to 300,working pressure PN16/Class125 Size 2"-12",working pressure 125WSP/200WOGTemperature from -10℃ to 120℃ Suitable Media:Water ,Oil ,Gas

w Flange Types

EN1092-2 PN10/PN16, ANSI B16.1 Class125,BS10 Table D/E, JIS 10K/16K.



Part Name Material EN Spec. ASTM Spec. Body Ductile Iron EN-GJS-500-7 A536 65-45-12

Body Trim Bronze EN1982 CC491K B62 C83600

Wedge Trim Bronze EN1982 CC491K B62 C83600

Wedge Ductile Iron EN-GJS-500-7 A536 65-45-12

Wedge Nut Bronze EN1982 CC491K B62 C83600

Stem SS BS970 420S37 AISI 410

Bonnet Ductile Iron EN-GJS-500-7 A536 65-45-12

GasketO-Ring EPDM Commercial Commercial

Gland Ductile Iron EN-GJS-500-7 A536 65-45-12

Packing Housin Ductile Iron EN-GJS-500-7 A536 65-45-12

Packing Graphite Non-asbestos Non-asbestos

Handwheel Ductile Iron EN-GJS-500-7 A536 65-45-12

w Dimensions (mm)

Size 50/2” 65/2.5” 80/3” 100/4” 125/5” 150/6” 200/8” 250/10” 300/12”

L 178 191 203 229 254 267 292 330 356

H(Open) 270 290 320 355 400 450 610 760 870

DBS 190 190 190 305 305 305 305 405 405

ANSI 178 178 190 250 307 300 356 400 457

Notes:1.Conforms to BS5150, MSS SP-70.2.Flanged machined and drilled to BS4504 PN16 or ANSI B16.1 125#,other flange types are available. 3.Design&materials are subjec to change without notice.

Fivalco®

-9-


w Working Pressure and TemperatureSize 50 to 600, working pressure PN16/Class125.Size 50 to 300, working pressure PN25/Class250.Temperature from -10℃ to 120℃.




Part Name Material EN Spec. ASTM Spec.Body PN16 / Class125 Cast Iron EN-JL1040 A126 Class B

PN25 / Class 250 Ductile Iron EN-JS1050 A536 65-45-12Body Trim Bronze EN1982

CC491KB62 C83600

Wedge Trim Bronze EN1982 CC491K

B62 C83600

Wedge PN16 / Class125 Cast Iron EN-JL1040 A126 Class BPN25 / Class 250 Ductile Iron EN-JS1050 A536 65-45-12

Stem Nut Bronze EN1982 CC491K

B62 C83600

Stem Brass CuZn39Pb3 B16 C36000Stainless Steel

BS970 420S37

AISI 420

Bonnet PN16 / Class125 Cast Iron EN-JL1040 A126 Class BPN25 / Class 250 Ductile Iron EN-JS1050 A536 65-45-12

Gasket Graphite Non-asbestos Non-asbestosYoke PN16 / Class125 Cast Iron EN-JL1040 A126 Class B

PN25 / Class 250 Ductile Iron EN-JS1050 A536 65-45-12Packing Graphite Non-asbestos Non-asbestosHand-wheel

PN16 / Class125 Cast Iron EN-JL1040 A126 Class BPN25 / Class 250 Ductile Iron EN-JS1050 A536 65-45-12

w Dimensions (mm)

Size 50/2” 65/2.5” 80/3” 100/4” 125/5” 150/6” 200/8” 250/10” 300/12” 350/14” 400/16” 450/18” 500/20” 600/24”

L 178 191 203 229 254 267 292 330 356 381 406 432 457 508H(Open) 405 415 486 632 710 842 1100 1228 1373 1595 1900 2210 2600 3040

D 178 178 190 250 300 300 356 400 457 508 558 610 610 762

OS&Y Gate ValvePN16/PN25/Class125/Class250


Fivalco®

-10-

NRS Gate ValvePN16/PN25/Class125/Class250








BodyPN16 / Class125 Cast Iron EN-JL1040 A126 Class BPN25 / Class 250 Ductile Iron EN-JS1050 A536 65-45-12

Body Trim BronzeEN1982 CC491K

B62 C83600

Wedge Trim BronzeEN1982 CC491K

B62 C83600

WedgePN16 / Class125 Cast Iron EN-JL1040 A126 Class BPN25 / Class 250 Ductile Iron EN-JS1050 A536 65-45-12

Stem Nut BronzeEN1982 CC491K

B62 C83600

StemBrass CuZn39Pb3 B16 C36000

Stainless Steel

BS970 420S37

AISI 420

BonnetPN16 / Class125 Cast Iron EN-JL1040 A126 Class BPN25 / Class 250 Ductile Iron EN-JS1050 A536 65-45-12Gasket Graphite Non-asbestos Non-asbestosPacking Graphite Non-asbestos Non-asbestos

Hand-wheel

PN16 / Class125 Cast Iron EN-JL1040 A126 Class BPN25 / Class 250 Ductile Iron EN-JS1050 A536 65-45-12

w Dimensions (mm)

Size 50/2” 65/2.5” 80/3” 100/4” 125/5” 150/6” 200/8” 250/10” 300/12” 350/14” 400/16” 450/18” 500/20” 600/24”L 178 191 203 229 254 267 292 330 356 381 406 432 457 508H 327 322 340 420 477 542 668 750 835 1015 1120 1210 1250 1390D 178 178 190 250 300 300 356 400 457 508 558 610 610 762

Fivalco®

-11-

NRS Gate ValvePN10 Fig. 3126

w Valve Standard: Complies with DIN3352.

w Face to Face: DIN3202 F4 series.

w Working Pressure and TemperatureSize 40 to 150, working pressure PN10,Size 200 to 300, working pressure PN6,Size 350 to 400, working pressure PN4.Temperature from -10℃ to 120℃.

w Flange TypesEN1092-2 PN10/PN16, other flange types are available.

w Operator: Handwheel operated.


Part Name Material EN Spec.Body Cast Iron EN-JL1040

Wedge Cast Iron EN-JL1040Body Trim Brass CuZn39Pb3

Wedge Trim Brass CuZn39Pb3Stem Nut Brass CuZn39Pb3

Stem Stainless Steel 17440X20Cr13Bonnet Cast Iron EN-JL1040O-Ring EPDM CommercialGland Cast Iron EN-JL1040Gasket Graphite Non-asbestos

Handwheel Cast Iron EN-JL1040

w Dimensions (mm)

Size 40/1.5” 50/2” 65/2.5” 80/3” 100/4” 125/5” 150/6” 200/8” 250/10” 300/12” 350/14” 400/16”L 140 150 170 180 190 200 210 230 250 270 290 310H 200 202 222 250 303 351 411 498 579 679 870 941D 130 130 130 150 185 185 195 225 245 285 400 400

Fivalco®

-12-

Globe ValvePN16/PN25/Class125/Class250

w Valve Standards: Complies with BS EN 13789 / MSS SP-85.

w Working Pressure and TemperatureWorking pressure PN16/PN25Class125/Class250.Temperature from -10℃ to 120℃.


Fig. 6123


Part Name Materials EN Spec. ASTM Spec.Body* Cast Iron EN-JL1040 A126 Class B

Bonnet* Cast Iron EN-JL1040 A126 Class BBody Trim Bronze EN1982 CC491K B62 C83600Disc Trim Bronze EN1982 CC491K B62 C83600

Disc* Cast Iron EN-JL1040 A126 Class BStem Stainless Steel BS970 420S37 AISI 420

Packing Graphite Non-asbestos Non-asbestosGasket Graphite Non-asbestos Non-asbestos

Yoke Bushing Brass CuZn39Pb3 B16 C36000Handwheel Cast Iron EN-JL1040 A126 Class B

Note*: Body, bonnet & disc materials are ductile iron when valve pressure rating is PN25/Class250.

w Dimensions (mm)

Size DN50/2” DN65/2.5” DN80/3” DN100/4” DN125/5” DN150/6” DN200/8” DN250/10” DN300/12”L 203 216 241 292 330 356 495 622 698.5

H(Open) 295 336 345 389 425 511 580 720 859D 190 190 190 305 305 305 305 400 457

Fivalco®

-13-

Swing Check ValvePN16/PN25/Class125/Class250

w Valve StandardsComplies with EN 12334, BS 5153, MSS SP-71 or AWWA C508.

w Working Pressure and TemperatureSize 50 to 600, working pressure PN16/Class125.Size 50 to 300, working pressure PN25/Class250.Temperature from -10℃ to 120℃ for bronzeor EPDM disc trim.Temperature from -10℃ to 82℃ for NBR disc trim.


Fig. 5101-Bronze Disc Trim.Fig. 5102-Rubber Disc Trim.


Part Name Materials EN Spec. ASTM Spec.Body* Cast Iron EN-JL1040 A126 Class BCover* Cast Iron EN-JL1040 A126 Class B

Side Plug Brass CuZn39Pb3 B16 C36000Hanger Pin Stainless Steel BS970 420S37 AISI 420

Hanger Ductile Iron EN-JS1050 A536 65-45-12Disc* Cast Iron EN-JL1040 A126 Class B

Disc TrimBronze EN1982 CC491K B62 C83600

EPDM/NBR Commercial CommercialBody Trim Bronze EN1982 CC491K B62 C83600

Gasket Graphite Non-asbestos Non-asbestos

Note*: Body, cover & disc materials are ductile iron when valve pressure rating is PN25 or Class250.

w Dimensions (mm)

Size 50/2” 65/2.5” 80/3” 100/4” 125/5” 150/6” 200/8” 250/10” 300/12” 350/14” 400/16” 450/18” 500/20” 600/24”

A 203 216 241 292 330 356 495 622 699 787 914 914 1016 1219B 121 135 141 168 182 215 267 305 343 450 520 550 590 680

Fivalco®

-14-

Wafer Double Door Check ValvePN16/Class125

w Working Pressure and TemperatureWorking pressure PN16/Class125.

Temperature from -10℃ to 120℃ for EPDM seat.Temperature from -10℃ to 82℃ for NBR seat.Temperature from -10℃ to 150℃ for Viton seat.

w Flange TypesEN1092-2 PN10/PN16, ANSI B16.1 Class125,BS10 Table D/E.

Fig. 5306


Part Name Material EN Spec. ASTM Spec.Body Cast Iron EN-JL1040 A126 Class BDisc Stainless Steel BS970 304S15 A351 CF8Seat EPDM/NBR/Viton Commercial Commercial

Hinge Pin Stainless Steel BS970 420S37 AISI 420Stop Pin Stainless Steel BS970 420S37 AISI 420

Pin Retainer Stainless Steel BS970 304S15 AISI 304Spring Stainless Steel BS970 304S15 AISI 304Washer PTFE Commercial CommercialGasket EPDM/NBR/Viton Commercial Commercial

w Dimensions (mm)

SizeA

B CTable D/E Flange ANSI 125# Flange

EN1092-2 PN16 Flange

50/2” 96 102 106 54 6665/2.5” 109 121 126 54 7880/3” 126 134 141 57 90100/4” 158 172 161 64 115125/5” 190 194 191 70 141150/6” 210 220 217 76 170200/8” 267 277 272 95 210250/10” 331 337 327 108 273300/12” 379 407 382 143 324350/14” 446 447 442 184 356400/16” 493 511 494 191 406450/18” 560 546 554 203 457500/20” 616 602 616 213 508600/24” 724 715 733 222 600

Fivalco®

-15-

Balancing ValvePN16/Class125

Fig. 1209-Flanged End.Fig. 1210-Grooved End.

w Working Pressure and TemperatureWorking pressure PN16/Class125Temperature from -10℃ to 120℃.

w Face to Face Dimensions: EN558-1 basic series 1.

w Flange TypesEN1092-2 PN10/PN16, ANSI B16.1 Class125,BS10 Table D/E, JIS 10K/16K.

w Grooved EndsGrooved dimensions to Metric /ANSI/ AWWA C606 pipe sizes


Part Name Material EN Spec. ASTM Spec.Body Ductile Iron EN-JS1050 A536 65-45-12Disc DI+EPDM Coated EN-JS1050 A536 65-45-12

Disc Nut Brass CuZn39Pb3 B16 C36000Stem Stainless Steel BS970 420S37 ANSI 420

O-Ring EPDM Commercial CommercialBonnet Ductile Iron EN-JS1050 A536 65-45-12Gasket Graphite Commercial Commercial

Handwheel (Size50-100)

Carbon Steel with FBE coated

Handwheel(Size125-200)

Ductile Iron EN-JS1050 A536 65-45-12

w Dimensions (mm)

Size 50/2” 65/2.5” 80/3” 100/4” 125/5” 150/6” 200/8”L 230 290 310 350 400 480 600H 260 293 305 323 353 388 453D 180 180 180 180 260 260 260

OD 60.3 73.0/76.1 88.9 114.3 139.7/141.3 165.1/168.3 219.1

w M3/h at 1 Kg/cm2 Pressure Drop

Pre- Setting 1 2 3 4 5 6 7 8 9 10 11 12 13 14Size 50 7.1 16.8 24.7 30.2 34.1 37.4 40.9 42.1 - - - - - -Size 65 12.1 19.7 28.0 39.4 51.7 64.7 74.0 80.9 - - - - - -Size 80 20.6 28.7 39.6 53.5 71.5 86.6 97.4 108.4 - - - - - -Size 100 25.7 55.0 78.9 112.3 145.2 170.9 192.5 210.3 - - - - - -Size 125 42.8 60.0 77.6 99.8 129.5 155.5 172.0 196.2 213.2 233.6 256.2 278.0 298.2 310.4Size 150 45.5 77.9 94.3 110.9 133.5 163.8 201.4 233.9 261.9 293.0 326.5 361.3 414.3 414.3Size 200 64.4 134.0 171.8 219.8 286.0 329.3 389.8 441.3 483.9 542.1 595.6 650.6 711.3 753.8

Fivalco®

-16-

Y-StrainerPN16/PN25/Class125/Class250



Fig. 7101-PN16/Class125.Fig. 7102-PN25/Class250.

w Standard Screens

Size Hole Dia. Free Flow AreaDN50 to 80 1.5mm 33%

DN100 to 600 3.0mm 40%



Body7101 Cast Iron EN-JL1040 A126 Class B7102 Ductile Iron EN-JS1050 A536 65-45-12

Cover7101 Cast Iron EN-JL1040 A126 Class B7102 Ductile Iron EN-JS1050 A536 65-45-12

ScreenStainless

SteelBS970 304S15

AISI 304

GasketTeflon /

GraphiteCommercial Commercial

Plug7101 Cast Iron EN-JL1040 A126 Class B7102 Ductile Iron EN-JS1050 A536 65-45-12

w Dimensions (mm)

Size 50/2” 65/2.5” 80/3” 100/4” 150/5” 200/6” 250/8” 250/10” 300/12” 350/14” 400/16” 450/18” 500/20” 600/24”

L 230 273 295 352 416 470 543 660 770 960 1079 1168 1275 1450H 146 174 198 232 285 305 401 473 554 740 840 910 968 1160

Plug 1/2” 1” 1” 1” 1-1/4” 1-1/2” 1-1/2” 2” 2” 2” 2” 2” 2” 2”

Fivalco®

-17-

Y-StrainerPN16/PN25/DIN3202

Fig. 7103-PN16.Fig. 7107-PN25.

w Working Pressure and TemperatureSize 50 to 600, working pressure PN16.Size 50 to 300, working pressure PN25.Temperature from -10℃ to 120℃.

w Face to Face Dimensions: DIN3202 F1 series.

w Flange TypesEN1092-2 PN10/PN16/PN25, other flange types are available.

w Standard Screens

Size Hole Dia. Free Flow AreaDN50 to 80 1.5mm 33%

DN100 to 600 3.0mm 40%



Body7103 Cast Iron EN-JL1040 A126 Class B7107 Ductile Iron EN-JS1050 A536 65-45-12

Cover7103 Cast Iron EN-JL1040 A126 Class B7107 Ductile Iron EN-JS1050 A536 65-45-12

Screen Stainless Steel BS970 304S15 AISI 304

GasketTeflon/EPDM/

GraphiteCommercial Commercial

Plug7103 Cast Iron EN-JL1040 A126 Class B7107 Ductile Iron EN-JS1050 A536 65-45-12

w Dimensions (mm)

Size 50/2” 65/2.5” 80/3” 100/4” 150/5” 200/6” 250/8” 250/10” 300/12” 350/14” 400/16” 450/18” 500/20” 600/24”

L 230 290 310 350 400 480 600 730 850 980 1100 1200 1250 1450H 135 165 186 226 267 305 358 495 530 740 840 910 968 1160

Plug 1/2” 1” 1” 1” 1-1/4” 1-1/2” 1-1/2” 2” 2” 2” 2” 2” 2” 2”

Fivalco®

-18-

Fivalco®

-19-

Bronze Balancing Valve

Fig. BALV-1

w Valve Standards: Conforms to BS7350

w Test Pressure:Body 3.0MpaSeat 2.0Mpa

w Working Pressure And Temperature:Working Pressure: PN25 Working Temperature: -10℃ to 120℃

w Working Medium:Water,Oil, Steam


w Dimensions (mm)

Size 1/2"/15 3/4"/20 1"/25 1-1/4"/32 1-1/2"/40 2"/50

L 87 96 100 114 125 146

H 105 106 127 128 143 144

C 46 51 56 57 61 75

No. Component Material1 Seat Retainer BS1400 LG22 Bonnet DZR3 Stem DZR4 Disc DZR5 Disc Retaining Ring DZR6 Balancing Cone DZR7 Drive Sleeve DZR8 Drive Sleeve Retaining Nut DZR

9Handwheel Retaining

ScrewDZR

10 Disc Face PTFE11 Handwheel Plastic12 Memory Stop Screw HT Steel13 O-Ring Seal EPDM Rubber14 Ident Ification Plate Polycarbonate15 Orifice Insert DZR16 Test Points DZR

PN25

Available with BSPT (Metric) or NPT Threads - Specify on Order

Fivalco®

-20-

60

50

40

30

20

10

5

4

3

2

1

0.80.2 0.3 0.4 0.5 1 2 3 4 5 7

Size = 1/2(DN15)Kvs = 2.2

3

Pres

sure

(KPa

)

Flowrate (m /h)

Flow Measurement Chart

Q = 0.1Kvs △p

Where

Q = Flow rate (m /h)

Kvs = Signal coefficient△p = Pressure(KPa)

FLOW RATE

3

Fivalco®

-21-

60

50

40

30

20

10

5

4

3

2

1

0.80.2 0.3 0.4 0.5 1 2 3 4 5 7

Size = 3/4(DN20)Kvs = 4.6

3Flowrate (m /h)

Q = 0.1Kvs △p

Where



FLOW RATE

3

Pres

sure

(KPa

)


Fivalco®

-22-

60

50

40

30

20

10

5

4

3

2

1

0.80.2 0.3 0.4 0.5 1 2 3 4 5 7

Size = 1(DN25)Kvs = 8.5

3Flowrate (m /h)

Q = 0.1Kvs △p

Where



FLOW RATE

3

Pres

sure

(KPa

)


Fivalco®

-23-

60

50

40

30

20

10

5

4

3

2

1

0.81 2 3 10 20 30 40

Size = 1 1/4(DN32)Kvs = 16.7

3Flowrate (m /h)4 5

Pres

sure

(KPa

)


Q = 0.1Kvs △p

Where



FLOW RATE

3

Fivalco®

-24-

60

50

40

30

20

10

5

4

3

2

1

0.81 2 3 10 20 30 40

Size = 1 1/2(DN40)Kvs = 26.1

3Flowrate (m /h)4 5

Q = 0.1Kvs △p

Where



FLOW RATE

3

Pres

sure

(KPa

)


Fivalco®

-25-

60

50

40

30

20

10

5

4

3

2

1

0.81 2 3 10 20 30 40

Size = 2(DN50)Kvs = 43.2

3Flowrate (m /h)4 5

Q = 0.1Kvs △p

Where



FLOW RATE

3

Pres

sure

(KPa

)


Fivalco®

-26-

Bronze Ball Valve(Threaded)Fig.BBV-1

w Valve Standards: Conforms to MSS SP 110


w Working Pressure And Temperature:Working Pressure: PN40 WorKing Temperature: -10℃ to 170℃


w Material Specifications

No. Component Material1 Body BS1400 LG22 Seat Retainer BS1400 LG2

3 BallDZR , Chrome

Plated4 Seat PTFE

5 StemDZR Brass CW602N

6 Packing PTFE7 Gland nut DZR8 Lever Mild Steel 9 Lever Nut Stainless Steel10 Lever Cover PVC

w Dimensions (mm)

Size 1/2"/15 3/4"/20 1"/25 1-1/4"/32 1-1/2"/40 2"/50d 14 19 24 31 38 49L 53 61 71 85 92 114H 44 51 55 65 70 83D 95 110 110 140 140 160

PN40


Fivalco®

-27-

Bronze Gate Valve (Threaded)

Fig.BGV-1

w Valve Standards: Conforms to MSS SP 80 BS5154 Series A





No. Component Material1 Body BS1400 LG22 Bonnet BS1400 LG23 Stem DZR4 Packing Nut Brass CW617N5 Packing PTFE6 Stem Bush DZR7 Disc BS1400 LG28 Handwheel Aluminium9 Handwheel Nut Stainless Steel

w Dimensions (mm)

Size 1/2"/15 3/4"/20 1"/25 1-1/4"/32 1-1/2"/40 2"/50 2-1/2"/65 3"/80 4"/100d 13 19 25 32 38 50 63 76 100L 42 47 53 62 64 76 96 105 124H 74 86.5 95 116 125 150 178 215 258D 52 60 60 70 78 92 100 110 130

PN20


Fivalco®

-28-

Bronze Gate Valve (Threaded)

Fig.BGV-2






No. Component Material1 Body BS1400 LG22 Bonnet BS1400 LG23 Stem DZR 4 Disc BS1400 LG25 Stuffing Box DZR6 Packing Nut PTFE7 Gland DZR8 Packing Nut DZR9 Handwheel Aluminium

10 ID Plate Aluminium11 Handwheel Nut DZR

w Dimensions (mm)Size 1/3"/8 3/8"/10 1/2"/15 3/4"/20 1"/25 1-1/4"/32 1-1/2"/40 2"/50 2-1/2"/65 3"/80

L 46 46 51 55 63 72.5 73 83 108 117H 126 126 129 159 189 219 246 301 369 416D 45 45 52 65 70 78 92 92 134 134

PN32


Fivalco®

-29-

Bronze Globe Valve (Threaded)

Fig. GL-1






No. Component Material1 Body BS1400 LG22 Bonnet BS1400 LG23 Stem DZR4 Packing Nut DZR5 Packing PTFE6 Disc BS1400 LG2 (1-1/4’’-2’’)6 Disc DZR7 Handwheel Aluminium8 Handwheel Nut Stainless Steel

w Dimensions (mm)

Size 1/2"/15 3/4"/20 1"/25 1-1/4"/32 1-1/2"/40 2"/50d 14 19 24 32 38 48L 52 63 76 84 98 116H 70 82 92 108 120 140D 60 65 70 78 92 103

PN20


Fivalco®

-30-

Bronze Globe Valve (Threaded)

Fig.GL-2






No. Component Material1 Body BS1400 LG22 Bonnet BS1400 LG23 Stem DZR4 Packing Nut Brass CW617N5 Packing PTFE6 Disc BS1400 LG2 (1-1/4’’-2’’)6 Disc DZR 7 Handwheel Aluminium8 Handwheel Nut Stainless Steel

w Dimensions (mm)Size 1/2"/15 3/4"/20 1"/25 1-1/4"/32 1-1/2"/40 2"/50

d 14 14 19 24 32 38L 49 56 66 74 85 100H 71 73 87 95 110 124D 52 60 65 70 78 92

PN16


Fivalco®

-31-

Bronze Swing Check Valve (Threaded)





w Material Specifications:

No. Component Material1 Body BS1400 LG22 Cap BS1400 LG23 Disc DZR Brass CW602N4 Hinge DZR5 Hinge Pin Stainless Steel 2Cr136 Hinge Nut DZR

w Dimensions (mm)

Size 1/2"/15 3/4"/20 1"/25 1-1/4"/32 1-1/2"/40 2"/50D 13 19 25 32 39 50L 58 66 76 88 96 112H 37 43 49 57.5 63 72

PN20 Fig. BCV-1


Fivalco®

-32-

Bronze Strainer (Threaded)

Fig. BS-1






No. Component Material1 Body BS1400 LG22 Stem Stainless Steel Type3043 Gasket PTFE4 Cap BS1400 LG25 Pin Electro Steel

w Dimensions (mm)

Size 1/2"/15 3/4"/20 1"/25 1-1/4"/32 1-1/2"/40 2"/50CM2 60 60 60 28 28 28

L 58 70 88 96 107 126H 33 42 48 55 61 79

PN20


Fivalco®

-33-

Bronze Ball Valve+ Strainer (Threaded)Fig.BBVS-1

w Valve Standards: Conforms to MSS SP 110





No. Component Material1 Seat Retainer BS1400 LG22 Seat PTFE3 Ball DZR. Chrome Plated4 Body BS1400 LG25 Screen Stainless Steel Type

3046 Gasket PTFE7 ID.Plate HT . Steel8 Stem Brass CW617N9 Stem Gasket PTFE10 Packing PTFE11 Gland Nut Brass CW617N

12 LeverMild Steel (Chrome

Plated)13 Lever Cover PVC14 Lever Nut Stainless Steel

w Dimensions (mm)

Size 1/2"/15 3/4"/20 1"/25L 80 92 112H 44 47 55D 95 95 110H 33 38 46

PN32


Fivalco®

-34-

Bronze Pressure Reducing Valve(Loose Joint)

Fig. BPRV-1

w Working Pressure And Temperature:Working Pressure: PN20 WorKing Temperature: -10℃to 70℃



w Materials SpecificationsBS1400 LG2

w Dimensions (mm)

Size 1/2"/15 3/4"/20 1"/25 1-1/4"/32 1-1/2"/40 2"/50 2-1/2"/65 3"/80 4"/100L 143 147 170 196 216 250 252 310 350B 116 116 165 192 192 272 272 385 385H 46 46 46 62 62 85 85 113 113

CM2 60 60 60 60 60 28 28 16 16

PN20


Fivalco®

-35-

Installation1 Piping systems should be thoroughly cleaned and free from ingress of foreign materials.2 Visually inspect the valve seating and ports for cleanliness immediately prior to installation.3 All valves should be independently supported against movement and stress from the connected piping

system.4 Check that the valve pressure rating is compatible with service conditions5 Operate the valve at least once from the open to closed position.6 Ensure that mating Flanges are compatible with intended service conditions.7 Install valves with the disc in the almost closed position. Good working practice dictates that butterfly

valves installed in the horizontal position have the stems in the vertical position.8 Interference between the butterfly valve disc and the mating pipes should be avoided under all circum-

stances. Before tightening flange bolts, carefully open the valve to the open position and check for any disc interference.

9 Ensure that the valve is centrally located between the flanges, is independently supported and is not dependent for any support from the connecting pipework.

Wafer valves should be installed by installing bolts through the lugs and tightening carefully, ensuring even contact between the flange face and Elastomer. Forcing the wafer valves into a tight space will cause damage to the Elastomer and should be avoided.

10 Tighten the bolts using the crossover method to distribute the loads evenly over the valves. Do not overtighten the bolts.

11 On dead end service a mating downstream blank flange should be installed to ensure safety.12 Lug type valves should be used for dead and service.13 Verify and adjust gear operator stops after installation.

Operation is via a lever handle with an indicator disc or a gear operator with an indicator.

OperationPeriodic inspection and operation of the valves is recommended to prevent buildup of foreign materials inside the valves and piping system.

Installation and Operating ManualButterfly Valves


Fivalco®

-36-

Installation and Operating Manual

Cast Iron Gate Globe and Check Valves

Installation1 Piping systems and valves should be thoroughly cleaned and free from ingress of foreign materials.2 Visually inspect the valve seating and ports for cleanliness immediately prior to installation.3 All valves should be independently supported against movement and stress from the connected piping system.4 Ensure that the valve pressure rating is compatible with service conditions5 Operate the valve at least once from the open to closed position.6 Verify that packing nuts are tight before pressurizing the system7 Check valves must be oriented properly for flow and gravity and must be installed sufficiently distant from

pumps or other devices producing turbulence.8 Gate valves are not suitable for throttling applications.9 Gate valves should be installed in the vertical position on horizontal pipework and in the horizontal position on

vertical pipework.

OperationGate and globe valves are manually operated multi-turn valves and are opened by a handwheel or other operat-ing device, generally in a clockwise direction and then closed counterclockwise. Gate valves with counterclockwise opening should be clearly identified to ensure safe operation Check valves operate automatically.

Inspection and Maintenance1 Valves should be inspected periodically and should be cycled to prevent buildup of foreign materials in the pip-

ing system and valve body. 2 In the event of a packing leak adjust the packing nuts to increase pressure on the stem packing. Packing nuts

should be tightening evenly approximately a quarter turn in a clockwise direction. 3 Always shut down the system before repacking the valve. Valves are designed with backseats for repacking

under pressure but this is not recommended.

Silent Check ValvesDesigned to automatically prevent reverse flow into the piping system. Installation procedures are as above with the arrow in the direction of flow.

Inspection and removal proceduresClose the isolating valve on the discharge side. Bleed system pressure from the discharge flange Do not loosen the flange bolts on the inlet sideuntil system pressure is relieved as damage may occur to the valve Remove Valve from the line and inspect internal parts for wear and tear. Do not attempt to inspect by removing the inlet side pipe as this will result indamage to the valve. For spare parts consult “MATERIALS” in the Fivalco catalogue.


Fivalco®

-37-

Website: www.fivalcovalves.comE-ma i l : [email protected]/ [email protected]

Fivalco®

Fivalco PolicyWe will manufacture and supply products of uncompromising quality, at competitive prices meeting appropriate world standards. We will distribute world wide only through carefully selected and qualified distributors offering superior service to the final user.

Fivalco WarrantyFivalco Inc. warrants each metal valve to be free from defects in material and workmanship under normal use and service for a period of one year from the date of purchase.

In the event that and defect is discovered which may be covered by this warranty, the owner should contact Fivalco Inc. or their distributor in writing or by telephone, fax, or E-mail.

The owner may be instructed to return the valve at owner expense to Fivalco Inc. or an authorized Fivalco distributor location for inspection. In the case that the inspection reveals that the valve is defective it will be replaced at Fivalco Inc.’s expense.

Replacements shall be shipped free of charge to the owners provided that the valve was installed in accordance with Fivalco Inc. instructions and in accordance with the local authority having jurisdiction.

To the Extent permitted by law this warranty specifically excludes incidental and consequential damages of every type and description resulting from any claimed defect in material or workmanship, including, but not limited to, personal injuries and property damages. To the extent permitted by law, implied warranties of merchantability and fitness for particular purposes are limited in duration.

Some states or countries do not allow exclusion or limitation of incidental damages so these limitations may not apply to you.

This warranty provides the owner with specific legal rights and owner may have other rights, which vary from state to state and country to country.

Contact your Fivalco Distributor for superior quality price and service.

FivalcoTM

Inc. Anaheim California USA

Fivalco Inc.

Fivalco INC. HVAC Catalogue - EVALC · HVAC Catalogue Iron And Bronze Valves 12/2009 ... Fivalco...

Documents

Transcript of Fivalco INC. HVAC Catalogue - EVALC · HVAC Catalogue Iron And Bronze Valves 12/2009 ... Fivalco...