Fireye BurnerPRO and more (2)
-
Upload
john-e-struble -
Category
Documents
-
view
71 -
download
3
Transcript of Fireye BurnerPRO and more (2)
INTRODUCING THE FIREYE® BURNERPRO A compact, microprocessor based, primary flame safeguard control system designed to provide the proper burner sequencing, ignition and continuous flame monitoring for onoff, multi-stage, or modulating burners used in commercial heating and process equipment firing oil and gas fuels. Designed for use in non-permanent operations that requires burner recycle at least once every 24 hours. A complete BurnerPRO system includes the BP110/230, flame scanner and wiring base.
A reasonable alternative to Flame Detection!
60-2944- 1Wiring BaseOpen base with terminal block and knockoutsWith grounding finger, 4.2”L x 4.2”W x 1.22”H
FIREYE® FLAME SCANNERSUV non self-checking Scanner Models:UV1AL-3, UV1AL-6, UV90L-1, UV90L-2.3 and 6 foot straight and or Angle Scanners.
Contact John Struble in our Cedar Knolls location with any questions and or pricing(973) 538-7161 ext. 1311 or via e-mail at [email protected]
Remember to add USG to your supplier and subcontractor bid list! Visit us online to find a location near you www.usginc.com
17 convenient branch locations throughout NY NJ & MA