Fertilizer Applicator Shanks - CFC Dist

CFC Distributors, Inc. Jan. 2022 Catalog Phone 800-548-6633116

Fertilizer Applicator ShanksAll shanks are made from 5160 chromium manganese steel, heat treated and tempered to provide over 150,000 psi tensile strength and resistant to “memory set”.

Order No. Description Wt. Stock RetailKSC95 Coil spring (1 1/4”) shank for Blue Jet applicators. 33 038118 $169.00

Designed for 4” x 6” tool barsSidemount knife pattern

Does not require knife plates

Sidemount knife patternDoes not require knife plates

Sidemount knife patternDoes not require knife plates

Used with knife plates and 4” square tool bars

KSC1298WP Flat spring shank (1” x 2”) for DMI, includes pin for closers.

03671 $109.00

KSC1295 Spring (1” x 2”) shank for Blue Jet applicators. 21 39968 $99.90

Order No. Description Wt. Stock Retail

Order No. Description Wt. Stock Retail

Order No. Description Stock Retail

KSC1290 Flat spring (1” x 2”) shank for DMI applicators. 19 05258 $75.00

KSC1299 Flat spring shank (1 1/4” x 2”) for DMI, includes pin for closers.

03091 $129.00


Fax 800-528-2554 www.cfcdist.com117

Fertilizer KnivesUniversal hole and slot will fit most applicators and tool bars.

Order No. Description Stock RetailKA50UVXCI2 Front swept universal knife with Chrome insert and 3/8”

tube.05835 $55.00

KA50UVXCI2.5 Front swept universal knife with Chrome insert and 1/2” tube.

09939 $57.00

KCO50 Front swept universal coulter knife with 3/8” stainless tube. 56025 $29.50

KCO50.5 Front swept universal coulter knife with 1/2” stainless tube. 50224 $31.50

KCO50104X CO50 with Chrome insert, 3/8” tube. 02935 $56.00

KCO50104X.5 CO50 with Chrome insert, 1/2” tube. 06048 $58.00


Order No. Description Stock RetailKA50NPCI4 Front swept Narrow Profile knife with Chrome insert and

3/8” tube.04635 $52.00

KA50NPCI4.5 Front swept Narrow Profile knife with Chrome insert and 1/2” tube.

08736 $54.00

KA50SKCI10 Front swept Super knife with Chrome insert and 3/8” tube. 04348 $62.00

KA50SKCI10.5 Front swept Super knife with Chrome insert and 1/2” tube. 08448 $64.00


KA50VT Back swept knife, thin profile, plain and 3/8” tube. 55815 $26.50

KA50VT.5 Back swept knife, thin profile, plain and 1/2” tube. 59915 $28.50


Order No. Description Stock RetailA50SS004X Front swept Super Sealer knife with Chrome insert and 3/8”

tube.02935 $56.00

A50SS004X.5 Front swept Super Sealer knife with Chrome insert and 1/2” tube.

06041 $58.00

Order No. Description Stock RetailK-7S Solid Ni-Chrome liquid applicator knife. This knife does

not use a weld-on tube, simply stick the tube down into the self-gripping deep hole that is cast into the knife. Works only with 3/8” diameter tubes.

39439 $49.90


HYLFCI4 Liquid fertilizer knife for Yetter 17” assemblies. Manufactured by CFC Distributors. Replaces Yetter no. 2975-220. 1/2” OD stainless steel tube.

04924 $42.00

2975-232 Dry fertilizer knife for Yetter 17” assemblies. Now with stainless steel tubes. Manufactured by CFC Dist. Replaces Yetter no. 2975-232.

08735 $54.00

2996-200 Liquid fertilizer knife for Yetter 20” assemblies. Manufactured by CFC Distributors. Replaces Yetter no. 2996-200. 1/2” OD stainless steel tube.

05136 $45.00

2996-201 Dry fertilizer knife for Yetter 20” assemblies. Now with stainless steel tubes. Manufactured by CFC Dist. Replaces Yetter no. 2996-201.

03559 $79.00


Order No. Description Stock RetailKA50MIN Mini Super Sealer style knife with Chrome insert and 3/8” tube. 10130 $44.30

KA50MIN.5 Mini Super Sealer style knife with Chrome insert and 1/2” tube. 14237 $46.30

2975-232

Order No. Description Stock RetailK33607014BB Knife to fit DMI side dress applicators. Has 3/8” stainless steel

tube, and chrome insert for longer wear.04926 $42.00

Order No. Description Stock RetailDF1 Front swept Shield Ag knife with Chrome insert, chrome

tube protector, and 3/8” closed and drilled tube. This knife sweeps forward more than the Super Sealer knife does.

03145 $59.00

DF1/1/2A Front swept Shield Ag knife with Chrome insert and 1/2” tube.

07241 $61.00

Knife shown with 3/8” tube and a 3/4” vapor tube applied.

DMI Liquid Side Dress Knife


Jamesway Knife

A50SS004JW Fertilizer knife with extra heavy side plates for use on Jamesway manure applicators. No tube installed.

03263 $89.00


Customize Your Knife OptionsThese charges will be added to the cost of any knife when you request these options.Order No. Description Stock Retail

CFCHS Application of Hardface to any fertilizer knife. (cannot be applied to knives with chrome inserts)

7965 $9.95

CAS75 Application of a “Beaver Tail” sealer to any knife. (Sealer included) 0480 $12.00

KATA Application of an additional 1/2” tube to any knife. 0079 $10.00

CAT18 Application of an additional 3/8” tube to any knife. 0078 $10.00

CVAPOR Application of a 3/4” Vapor tube to any knife. 00415 $20.00

12112S Application of an additional 1-1/2” tube to any knife. 08614 $24.00

Ordering Information: *Hardface cannot be applied to a chrome insert knife. *When applying tubes to knives please specify “open end” tubes or “closed and drilled” tubes.


KAT Fertilizer tube only, 1/2” O.D. Specify open or closed and drilled. 0656 $8.00

KRT18 Fertilizer tube only, 3/8” O.D. Specify open or closed and drilled. 0655 $8.00

KAS75N Beaver tail sealer, “narrow”. 0364 $9.00

KAS75W Beaver tail sealer, “Wide”. 0364 $9.00

K1234F 3/4” vapor tube only. 05016 $15.00

Bulk Fertilizer Knife Repair Parts


Dual Tillage KnivesApply liquid or vapor fertilizer during spring or fall tillage work. Fits all field cultivators and chisel plows.

A KDT3 Spike for Field Cultivator, 3/8” tube. 58718 $25.50

B KDT4CI6 Spike for field cultivator, thin profile with chrome insert, 3/8” tube. 02238 $46.00

C KCP70CI4 Spike for chisel plow, thin profile with chrome insert, 3/8” tube. 03143 $59.00

D KCP65 Spike for chisel plow, 3/8” tube. 04228 $32.00

E KCPK-1E Spike for chisel plow, made from 3/4” thick steel. Uses 1/2” bolt holes on a 2 1/4” spacing (center to center).

39148 $59.90

F KTBFC Tube and bracket assembly for field cultivators, 3/8” tube. 03318 $19.00

G KTBCP Tube and bracket assembly for chisel plows, 3/8” tube. 03314 $19.00

Style Order No. Description Stock Retail A B C D E F G

Coulter Blades for Tool BarsOrder No. Description Stock RetailM2520YMR 20”, 25 wave coulter to fit most 4 bolt tool bar patterns. The 25 wave flute helps

knives wear longer. Fits all 4 bolt DMI, Yetter, Blue Jet, and others. (.197 thick)30730 $52.90

MF20177MLWROL 20” fluted coulter to fit all DMI and Yetter hole patterns. This blade is dual punch and fits all 4 bolt DMI, Yetter, Blue Jet, and others. (.177 thick)

97436 $49.70

TATU-F20177MLOL 20” fluted, dual punch. Made in Brazil out of Boron Steel. Fits all 4 bolt DMI, Yet-ter, Blue Jet, and others. (.177 thick)

59628 $38.50

P20197MLOL 20” plain edge coulter to fit all DMI and Yetter hole patterns. This blade is dual punch and fits all 4 bolt DMI, Yetter, Blue Jet, and others. (.197 thick)

51834 $54.50

MF20177MLWROL

Krause Strip till RepairOrder No. Description Stock RetailQ1008820C Replacement chain for Krause Gladiator® Strip-till system. 5258 $7.50


John Deere 2510H Applicator Order No. Description Stock Retail

G89376 Boot scraper, left hand. 2510H applicator s/n 740101 & up. Replaces JD no. A89376.

04639 $52.00

G89381 Boot scraper, Right hand. 2510H applicator s/n 740101 & up. Replaces JD no. A89381.

04634 $52.00

G89556 Beaver tail scraper, left hand. 2510H applicator s/n 740101 & up. Replaces JD no. A89556. Bolt is IB860MCB, nut BH8MLN (sold seperately).

7678 $10.95

G89437 Beaver tail scraper, right hand. 2510H applicator s/n 740101 & up. Replaces JD no. A89557. Bolt is IB860MCB, nut BH8MLN (sold seperately).

7677 $10.95

CN86426 Bushing, gauge wheel arm (s/n 2067 & up), fits over CN88112 pivot bushing. Located in cast arm (2 used). For closing wheel arm, fits over CN86886 pivot bushing. .750” Width, 1.50” OD, 1.132” ID. Replaces JD no. A86426.

9938 $4.99

CN88112 Pivot bushing for gauge wheel arm, bolts to arm (1 used). 1.97” Width, 1.122” OD, .650” ID. Replaces JD no. A88112.

7097 $12.95

CN86886 Pivot bushing for closing wheel arm, bolts to arm. 1 used per arm. Width - 3.37”, O.D. - 1.125”, I.D. - .650”. Replaces JD no. A86886.

78119 $16.95

H750 Bearing, Gauge wheel and cast sealing wheel. Replaces JD no. AN212132. 5668 $9.50

CN219547 Bushing, Closing wheel arm. Replaces JD no. N219547. 4228 $3.20

CN282536 Pivot pin. Replaces JD no. N282536. 37118 $16.75

P74643 Spring for closing wheel arm. Replaces JD no. A74643; A47132. 5959 $8.50

WP2314G5 22.9” Smooth, single bevel, coulter blade to fit John Deere 2510H High Speed Low Disturbance applicator. This blade has a 1 1/2” round center hole, 5 bolt on a 3.15” bolt circle. Replaces JD no. A84920.

36659 $80.90

GW316NB Gauge wheel assembly. 3” x 16” with H750 bearing (mount with bolt), black nylon outer rim and black steel inner rim. Replaces JD no. AA66988.

00889 $110.00

G90191 Plug for non-vented rows. Fits John Deere 2510H applicators s/n 740101 and up. Replaces JD no. A90191.

3628 $3.75

G90192 Plug for vented rows. 2510H applicators s/n 740101 and up. Replaces JD no. A90192.

1528 $3.35

C86916 Triple lip seal. For top of closing wheel arm on 2510H applicator. Replaces JD no. A86916.

5138 $4.50

G79983 NH3 tube with vent, right. 2510H applicators s/n 740101 & up. Replaces JD no. AA79983.

79438 $49.95

G79984 NH3 tube with vent, left. 2510H applicators s/n 740101 & up. Replaces JD no. AA79984.

79434 $49.95

G73757 NH3 tube, left. 2510H applicators s/n 740101 & up. Replaces JD no. AA73757.

78818 $26.95

G73758 NH3 tube, right. 2510H applicators s/n 740101 & up. Replaces JD no. AA73758.

78817 $26.95

G85569 Pin, drilled for 2510H applicators. Replaces JD no. A85569. 06218 $18.00


Strip-Till Points

Order No. Description Stock RetailST-16 Strip-till knife with 3/8 tube and strip-till protection. Designed

for a fertilizer placement of 6” to 10” deep.57699 $129.00

ST-16DA Strip-till knife with dual 3/8” tubes and strip-till protection. 034018 $149.00

ST-16/112 Strip-till knife with a single 1-1/2” tube for dry fertilizer. 031111 $159.00

ST-16/112DA Strip-till knife with a single 3/8” tube and a single 1-1/2” tube. 038118 $169.00

SCRP20 Conservation ripper point, 2.5” wide to fit Brillion ST-30 Strip-till machine, 3/4” shank. Disturbs less soil than the OEM point and wears longer.

038118 $169.00

SCRP18 Conservation Ripper point to fit Unverferth Strip-till machine. 2.5” wide for 3/4” shank.

031118 $159.00

WILOC Crimp on point to fit Red Ball Strip-till machine. Wiese no. 41W1LOC.

06917 $28.00

KST Krause Strip Till point, made of a Chrome alloy. Replaces Krause Q1008390.Used with side plates below.

03558 $79.00

CF1000680 Pair of Side plates for Krause strip till units, 3/16” thick. For liquid fertilizer use only. The OEM number referenced is for 1 side only, we are selling them as a pair. Replaces Krause no. Q1000680.

05718 $25.00

W2987SA High Performance replacement point for Orthman 1tRIPr strip till ma-chine. Sold with attaching pins. Also used on Sunflower strip till units. Replaces Orthman no. 387-130.

05668 $95.00

Strip Till Points for booted attachment

Points for side mount attachment


We can modify Strip-till knives into many different configurations. We have 3/4, 1 1/4”, 1 1/2”, 1/2”, 3/8” tubes all available. Call for a quote on any knife not listed above.

ST-16 with Single 3/8” tube.

TB-18 curved back tube, can be added to any strip-till knife.

WP2214ORT 22” smooth, flat replacement blade for Orthman 1tRIPr strip till ma-chine. Replaces Orthman no. 166-033. Bolt circle is 4”. **this blade is cut from a pilot so please allow one additional day for shipping.

09358 $77.00

W17197ORT6 17” wavee coulter to fit Orthman 1tRIPr strip till machine closing assembly. Replaces Orthman no. 166-040. (OEM blade is 4 mm thick, CFC blade is 5 mm thick.)

08738 $54.00


KST

Fertilizer Applicator Shanks - CFC Dist

Documents

Transcript of Fertilizer Applicator Shanks - CFC Dist