1 1 1 , 1 1 ï 1 1 1 1 1 1 1 1 1 1 1 1 1 1 ï 1 1 ñ 1 1 W V ...
ferens_ken_P1.1_TPP_v1 (1)
Transcript of ferens_ken_P1.1_TPP_v1 (1)
-
8/12/2019 ferens_ken_P1.1_TPP_v1 (1)
1/7
-
8/12/2019 ferens_ken_P1.1_TPP_v1 (1)
2/7
P1.1
Page 2 of 7
[Insert appropriate disclaimer(s)]
VERSION HISTORYEmbedIT Template Version:09/16/13
Version#
Implemented
By
Revision
Date
Approved
By
Approval
Date
Reason Mark
1 Ken Ferens 1/17/2014 TPP P1.1
-
8/12/2019 ferens_ken_P1.1_TPP_v1 (1)
3/7
P1.1
Page 3 of 7
[Insert appropriate disclaimer(s)]
TABLE OF CONTENTS
INTRODUCTION......................................................................................................................... 41.1 Purpose of THE Document................................................................................... 4
DELIVERABLES 1-4 ................................................................................................................... 41.2 Items to be Tested / Not Tested ................................................................................. 41.3 Test instructions ........................................................................................................ 4
MEASUREMENT TESTING ...................................................................................................... 41.4 Items to be Tested / Not Tested ................................................................................. 41.5 Test instructions ........................................................................................................ 4
TEST PLAN TEMPLATE APPROVAL .................................................................................... 6REFERENCES 7
-
8/12/2019 ferens_ken_P1.1_TPP_v1 (1)
4/7
P1.1
Page 4 of 7
[Insert appropriate disclaimer(s)]
INTRODUCTION
1.1 PURPOSE OF THE DOCUMENT
The purpose of this test plan document is to provide the deliverables for P1.1,which includes tables 1.7, () and a set of instructions for measuring tB.
DELIVERABLES 1-4
1.2 ITEMS TO BE TESTED / NOT TESTED
Item to Test Test Description Test Date Responsibility
Tables 1.7, () and a setof instructions formeasuring tB.
[description here] Ken Ferens
1.3 TEST INSTRUCTIONS
Instruction P/F
1. Please find attached Deliverable 1: filename1
2. Please find attached Deliverable 2: filename2
3. Please find attached Deliverable 3. Filename3
4. Please find attached Deliverable 4. Filename4
MEASUREMENT TESTING
1.4 ITEMS TO BE TESTED / NOT TESTED
Item to Test Test Description Test Date Responsibility
measuring tB Measuring the time between A falling andB falling, to determine if enough time forreading B on negedge of A.
Ken Ferens
1.5 TEST INSTRUCTIONS
Instruction P/F
1. Connect the board as shown in Fig. 4 of the Project 1 manual [1].
2. Connect the board to a PC as shown in System Connection.pdf [1].
3. Start MPLAB X
-
8/12/2019 ferens_ken_P1.1_TPP_v1 (1)
5/7
-
8/12/2019 ferens_ken_P1.1_TPP_v1 (1)
6/7
P1.1
Page 6 of 7
[Insert appropriate disclaimer(s)]
TEST PLAN TEMPLATE APPROVAL
The undersigned acknowledge they have reviewed the P1.1Test Plan Templatedocument and agree with the approach it presents. Any changes to thisRequirements Definition will be coordinated with and approved by the undersignedor their designated representatives.
[List the individuals whose signatures are required. Examples of such individualsare the TA, Business Steward, Technical Steward, and Project Manager. Addadditional signature lines as necessary.]
Signature: Date:
Print Name:
Title:
Role:
-
8/12/2019 ferens_ken_P1.1_TPP_v1 (1)
7/7
P1.1
Page 7 of 7
[Insert appropriate disclaimer(s)]
References
[1] K. Ferens, "ECE 3730 Principles of Embedded Systems Design 1," 17 January 2014.
[Online]. Available: http://ece.eng.umanitoba.ca/undergraduate/ECE3730/. [17 January
2014].