Feigin Electric - Energy Savings Solution · The Smart Optimizer ECOD is an electric power saving...
Transcript of Feigin Electric - Energy Savings Solution · The Smart Optimizer ECOD is an electric power saving...
Feigin Electric - Energy Savings Solution www.feiginelectric.com
Feigin Electric - Energy Savings Solution www.feiginelectric.com
Why Is Your Electric Bill So High?
Did you know that the power supply by your electric company is rarely optimal or ideal with the standard 220V or 230V, 110V or 120V?
You can rarely find 220V or 230V, 110V or 120V (depending on the country’s accepted standard) it’s almost always plus or minus 5-10%.
In large cities the voltage is close to the upper tolerance range. For example, in a country where 220 V is taken as a basic in the network, there will be 222-232V and even more. Distributors increase the voltage to control voltage drop at peak power consumption and to reduce losses in transmission lines.
This voltage increase is the main cause of “inefficient” electricity use and higher power bills to the end user.
1. 2.
3. 4.
Feigin Electric - Energy Savings Solution www.feiginelectric.com
1
2
In most cases the necessary power is not constant but within tolerance range.
By keeping the customer’s power at the minimum of the tolerance range - we are saving energy.
Balanced and optimized
Our Energy Savings Solution
1
2
3
Technology
When we regulate Voltage (V) we regulate Current (Amps) and Efficiency (Power Factor) of the load, respectively we regulate Consumption (W)
By implementing our technology the consumers of electricity can optimize power consumption and reduce power bills
S (Watts) apparent power = U (Volts) * I (Amps) / PF (Power Factor)
Formula
Solution
CONTROL POWER SUPPLY
OUTPUT TERMINAL BLOCK
CONTROL PROTECTION MODULE
COMMUNICATION BLOCK
CONTROL BLOCK AND SYSTEM INDICATOR
BLOCK OF TRANSFORMERS
AUTOMATIC MAIN BREAKER
PHASE SNUBBERS
TERMNAL BLOCK
Feigin Electric - Energy Savings Solution
Working Principle
The electronic controller regulates the direction of the current in the coil of each transformer (one per
phase) to regulate and balance the network parameter. This provides high performance while
minimizing power loss in the network.
www.feiginelectric.com
Feigin Electric - Energy Savings Solution www.feiginelectric.com
01 03
0402Controls the voltage to
your loads and keeps current within the optimum
range for best efficiency
Filters harmonics from
reactive loads/motors, increasing efficiency
even more
Balances the phase
voltage
The Smart Optimizer ECOD is an electric power saving device which:
Improves the quality of the electrical power
supply overall
Method
Feigin Electric - Energy Savings Solution www.feiginelectric.com
Due to our patented technology, the efficiency of the ECOD optimizer can reach 99.7%The efficiency of all other stabilizers and transformers is 95% - 97%. That means the use of conventional stabilizers for optimizing the consumption, in most cases, is ineffective, even causing loss of energy.
We use transformers with 15 times less capacity than those used in other stabilizers for the same load capacity.
What Makes the Feigin Electric ECOD Optimizer Unique?
Feigin Electric - Energy Savings Solution www.feiginelectric.com
-8.1%
Comparing June 2016 (699.30 kwh/day) - June 2017(642.40 kwh/day) is showing 8.1% reduction
of their power consumption -5.6%
-14.9%
699.30 kwh742.19 kwh
736.06 kwh
642.40 kwh
June 2016 July 2016 August 2016 June 2017 July 2017 August 2017
The data on the right is showing the average consumption per day during the months June, July and August without (2016) and with (2017) the use of Smart - Optimizer ECOD
Comparison of Consumption at Pizza CompanyBangkok, Thailand
631.52 kwh
677.08kwh
KW
H p
er d
ay
Month
Comparing July 2016 (742.19 kwh/day) - July 2017(631.52 kwh/day) is
showing -14.9% reduction of their power
consumption
Comparing August 2016 (736.06 kwh/day) - August 2017(677.08 kwh/day) is
showing -5.6% reduction of their power consumption
Feigin Electric - Energy Savings Solution www.feiginelectric.com
Feigin Electric Implementation Process
Analysis of the client’s power supply in order to detect its
problems and limitations.
! Equipment delivery, assembly, installation and activation.
Recommendations for improvement –
determination of the type of equipment,
configuration and investment cost.
Post sale service and maintenance
guarantee