Air ReceiverAir receiver is essential to every compressed air system to act as a buffer and a storage medium between the compressor and the consumption system. There are in principal two different air receivers in a compressed air system:PRIMARY receiver - located near the compressor, after the after-cooler but before filtration and drying equipmentSECONDARY receivers - located close to points of larger intermittent air consumption

Technical Specification:

Refrigerated Air Dryer Compressed Air Filter Heatless Air Dryer Automatic Drain Valve

Other Range of Product

Features

Benefit

â Simply Installation & lifetime flexibility.â Complete with hydrostatic test.â Reliable Compact Design.â Fabricated as per ASME SEC VIII Div I / IS: 2825

â Equalizing the pressure variation from the start/stop and modulating sequence of the compressorâ Storage of air volume equalizing the variation in consumption and demand from the systemâ Collecting condensate and water in the air after the compressor

â Internal anti-corrosive paint.â External double coats of Zinc Chromate paint.â Supplied with standard accessories.â Third party inspection as option.

ModelWorking Pressure

(Bar g)Capacity

Standard Accessories End Conn. Inspection

Hole

Overall Dimension(mm.)

7 8 10 13 Ltrs. M3 Diameter (Inner) Height

ZAR 025 √ √ √ √ 250 0.25

Saf

ety

Val

ve, m

anu

al

Dra

in &

Pre

ssu

re G

auge

¾” BSP (F) Hand Hole 500 1600ZAR 050 √ √ √ √ 500 0.5 1” BSP (F) Hand Hole 610 2100ZAR 100 √ √ √ √ 1000 1 1½” BSP (F) Hand Hole 762 2650ZAR 150 √ √ √ √ 1500 1.5 2” BSP (F) Man Hole 914 2800ZAR 200 √ √ √ √ 2000 2 2” BSP (F) Man Hole 1067 2800ZAR 250 √ √ √ √ 2500 2.5 DN 80 Man Hole 1067 3350ZAR 300 √ √ √ √ 3000 3 DN 100 Man Hole 1067 4000ZAR 400 √ √ √ √ 4000 4 DN 100 Man Hole 1219 4050ZAR 500 √ √ √ √ 5000 5 DN 100 Man Hole 1372 4000ZAR 600 √ √ √ √ 6000 6 DN 150 Man Hole 1372 4700ZAR 700 √ √ √ √ 7500 7 DN 200 Man Hole 1500 4650ZAR 1000 √ √ √ √ 10000 10 DN 200 Man Hole 1500 6310

Design Pressure: 10% above on Max. Working Pressure Hydro-test Pressure: 50% above on Design Pressure.Inlet/outlet connection BSP (F) in case threaded and ANSI B16.5 Cl.150 in case flanged. To be customized on customer requirement. Finish paint to be provide as per customer requirement. Note : for other specification kindly contact our factory.

MODEL NOMENCLATURE ZAR XXX XX Zenith Air Receiver Capacity in Ltrs multiplying 10Max. Working Pressure

Product Design and specifications are subject to change due to constant upgradation.

Air ReceiverAir receiver is essential to every compressed air system to act as a buffer and a storage medium between the compressor and the consumption system. There are in principal two different air receivers in a compressed air system:PRIMARY receiver - located near the compressor, after the after-cooler but before filtration and drying equipmentSECONDARY receivers - located close to points of larger intermittent air consumption

Technical Specification:

Refrigerated Air Dryer Compressed Air Filter Heatless Air Dryer Automatic Drain Valve

Other Range of Product

Features

Benefit

â Simply Installation & lifetime flexibility.â Complete with hydrostatic test.â Reliable Compact Design.â Fabricated as per ASME SEC VIII Div I / IS: 2825

â Equalizing the pressure variation from the start/stop and modulating sequence of the compressorâ Storage of air volume equalizing the variation in consumption and demand from the systemâ Collecting condensate and water in the air after the compressor

â Internal anti-corrosive paint.â External double coats of Zinc Chromate paint.â Supplied with standard accessories.â Third party inspection as option.

ModelWorking Pressure

(Bar g)Capacity

Standard Accessories End Conn. Inspection

Hole

Overall Dimension(mm.)

7 8 10 13 Ltrs. M3 Diameter (Inner) Height

ZAR 025 √ √ √ √ 250 0.25S

afet

y V

alve

, man

ual

D

rain

& P

ress

ure

Gau

ge¾” BSP (F) Hand Hole 500 1600

ZAR 050 √ √ √ √ 500 0.5 1” BSP (F) Hand Hole 610 2100ZAR 100 √ √ √ √ 1000 1 1½” BSP (F) Hand Hole 762 2650ZAR 150 √ √ √ √ 1500 1.5 2” BSP (F) Man Hole 914 2800ZAR 200 √ √ √ √ 2000 2 2” BSP (F) Man Hole 1067 2800ZAR 250 √ √ √ √ 2500 2.5 DN 80 Man Hole 1067 3350ZAR 300 √ √ √ √ 3000 3 DN 100 Man Hole 1067 4000ZAR 400 √ √ √ √ 4000 4 DN 100 Man Hole 1219 4050ZAR 500 √ √ √ √ 5000 5 DN 100 Man Hole 1372 4000ZAR 600 √ √ √ √ 6000 6 DN 150 Man Hole 1372 4700ZAR 700 √ √ √ √ 7500 7 DN 200 Man Hole 1500 4650ZAR 1000 √ √ √ √ 10000 10 DN 200 Man Hole 1500 6310

Design Pressure: 10% above on Max. Working Pressure Hydro-test Pressure: 50% above on Design Pressure.Inlet/outlet connection BSP (F) in case threaded and ANSI B16.5 Cl.150 in case flanged. To be customized on customer requirement. Finish paint to be provide as per customer requirement. Note : for other specification kindly contact our factory.

MODEL NOMENCLATURE ZAR XXX XX Zenith Air Receiver Capacity in Ltrs multiplying 10Max. Working Pressure

Product Design and specifications are subject to change due to constant upgradation.