Fast-Swap Body System for Tipper Body - Concrete Mixer Truck
-
Upload
florin-gabriel-dumitrica -
Category
Documents
-
view
99 -
download
6
description
Transcript of Fast-Swap Body System for Tipper Body - Concrete Mixer Truck
Standard scope of delivery differs from illustration, see inside
Fast-swap body system for tipper body - concrete mixer truck
Subject to technical changeLast updated: 20.02.2013
FOR TIPPER BODY
3-axle truck with internal body dimension of 4,880 or 5,100 mm
Fast-swap system for rapid, convenient and safe swapping of bodies, incl. subframe, in approx. 5 min.Body subframe attachment via solid, chamfered wedge hooks
The truck is equipped with a pneumatically operated 4 or 6 t dual-link lifting and locking rocker, whichautomatically moves the body over a cross member welded to the subframe for locking/unlockingvia the wedge hooks.The body is raised or lowered in a direct, mechan. linked sequence.
The swap process is facilitated by positioners, guides and stops.This ensures safe, rapid changeover on firm, level surfaces without faults or operating errors.The top dead centre locking generated due to spring preload is further secured by means of an electr. acoustic warning system in the cab.
The system is conveniently operated via a key switch valve in the cab.1 set of HP couplings for tipper hydraulics, dry version
1 set of support leg pockets incl. plug-in support legs with feet for depositing empty body on level ground
STANDARD VEHICLE DESCRIPTION
Fast-swap body system for tipper body - concrete mixer truck
Subject to technical changeLast updated: 20.02.2013
FOR MIXER BODY
Swap body for a suitable 6 to 7 or 8 to 9 m³ concrete mixer truck, delivered prepaid to body plantcomplete with accessories such as underride protection, mudguards incl. brackets, adapted subframe offsetEDC control unit with cables routed to the front, plus pre-assembled and painted as normal Shortening of subframe at front to match front stop, allowing replacement with autom. pneum. swap systemincl. solid wedge hooks and cross members
Adaptation of supplied propshaft for hydraulic drive and of underride protectionDelivery of 1 set of support leg pockets incl. plug-in tubular support legs with feet for depositing the emptymixer body, as well as conversion of propshaft for hydraulic drive with switch fuse, dynamically balancedand 1 quick-release propshaft claw coupling for engine output to be provided with truck,incl. dust protection,key and fitted suspension
Connection of pre-fitted EDC control unit for engine start/stop and speed control with max. 15-pin connector + socket on console behind cab
Spot repair of mixer paintwork at weld points1 set of cross members for 2 pairs of chute brackets provided
STANDARD VEHICLE DESCRIPTION
Fast-swap body system for tipper body - concrete mixer truck
PROGRESSIVE.INDIVIDUAL.LIMITLESS.
What Schwarzmüller customers value...
– Years of experience and wide-ranging expertise for stable and payload-optimised construction
– Utmost quality awareness throughout the entire process chain
– Perfectly engineered functionality with sophisticated design
– Innovation and progress paired with individuality and flexibility for the best transport and customer solutions
www.schwarzmueller.com
Subject to technical changeLast updated: 20.02.2013
Fast-swap body system for 3-way tipper body / concrete mixer truck
Front supports for quick and simple body replacement
Rearward angled supports for secure body placement Concrete mixer body in deactivated state
OPTIONAL: Foldable and removable underride protection
Subject to technical changeLast updated: 20.02.2013
STANDARD TECHNICAL DRAWING
VEHICLE-SPECIFIC BENEFITS/OPTIONS
Pneumatic lifting bellows for raising the entire body
Optimum fixation of subframe to truck chassis via wedge hooks
Front supports for quick and simple body replacement
Rearward angled supports for secure body placement
Special subframe construction for optimum attachment of body to truck chassis
Guides, positioners and stops for safe and simple replacement
OPTIONAL: Foldable and removable underride protection
FOCUSEDON EFFICIENCY.
www.schwarzmueller.com
To keep your feet firmly on the path of success, you mustoperate with greater strength, flexibility and efficiency than your competitors.
Schwarzmüller has dedicated itself to the pursuit of payload optimisation.The bottom line is that your economic success is our utmost concern!
OFFICES / REPRESENTATIVES
MAIN FACTORY
A-4785 Freinberg, Hanzing 11Tel.: +43(0)77 13 / 800 - 0Fax: +43(0)77 13 / 800 - 297E-Mail: o� [email protected]: www.schwarzmueller.com
BELGIUMB-8790 WaregemTel.: +32 / 56 / 61 01 61E-Mail: [email protected]
BOSNIA AND HERZEGOVINABA-71210 Ilidza-SarajevoTel.: +387 / 33 / 761-065E-Mail: [email protected]
BULGARIABG-1202 Sofi aTel.: +359 / 2 / 93 66 626E-Mail: [email protected]
GERMANYD-94032 PassauTel.: +49 / 851 / 95 94 300E-Mail: o� [email protected]
ITALYI-39011 LanaTel.: +39 / 335 / 54 36 010E-Mail: [email protected]
KAZAKHSTANKZ-050060 AlmatyTel.: +7 / 701 / 77 79 973E-Mail: [email protected]
CROATIAHR-10360 SesveteTel.: +385 / 1 / 64 07 683E-Mail: [email protected]
LATVIA/LITHUANIALT-04130 VilniusTel.: +370 / 523 / 92 188E-Mail: [email protected]
NETHERLANDSNL-8441 PK HeerenveenTel.: +31 / 51 / 36 71 861E-Mail: [email protected]
POLANDPL-01-940 WarschauTel.: +48 / 22 / 86 50 308E-Mail: [email protected]
RUSSIARU-117535 MoskauTel.: +7 / 495 / 92 21 001E-Mail: [email protected]
ROMANIARO-077096 Dragomiresti Deal, DE203Tel.: +40 / 21 / 52 82 300E-Mail: o� [email protected]
SWITZERLANDTel.: +41 / 79 / 23 72 166E-Mail: [email protected]
SERBIASRB-22310 Simanovci Tel: +381 / 22 / 21 55 400E-Mail: [email protected]
SLOVAKIASK-95501 TopolcanyTel.: +421 / 385 / 32 24 53E-Mail: o� [email protected]
SLOVENIASLO-1356 DobrovaTel.: +386 / 51 / 60 06 54E-Mail: [email protected]
CZECHIACZ-26753 ZebrakTel.: +420 / 311 / 90 81 11E-Mail: o� [email protected]
UKRAINEUA-08114 Kyivo-SviatoshynskogoTel.: +380 / 44 / 40 63 709E-Mail: o� [email protected]
HUNGARYH-2330 DunaharasztiTel.: +36 / 24 / 50 30 00E-Mail: o� [email protected]
BELARUSBY-220030 MinskTel.: +375 / 296 / 51 04 03E-Mail: [email protected]