benefits that are too good to ignore

Steel Chassis Tipper

Visit us at www.hamelexwhite.com.auA division of Maxitrans Australia Pty LtdABN 95 081 151 699

Construction Constructed from high tensile steel plate and sections

Floor 5mm high tensile steel plate welded directly to main bearers and cross bearers

Walls 3mm high tensile steel plate continuous weld to coaming rail. 450 bottom corners

Tailgate3mm high tensile steel plate on SHS and RSA frame Top forward hinged (100mm) c/w demo latch. Manual operated tailgate

SuspensionYork Duratrac air bag suspension on York 2000 series steel 10 stud 285PCD 1840 track, grease filled axles

Braking system ADR approved dual line brake system

Hoists Hoist Hydraulics low friction, low profile hoist

Lighting Narva LED rear inserts and side lights

Standard equipment

Standard Equipment - Bridgestone R187 11R x 22.5 tubeless tyres - Fullchamp machine finished aluminium wheels - Dual underslung fixed wheel carrier - Glasurit 2 pack (non metallic) paint to all HXW steel work – 2 colours - 2 speed landing legs - Skid plate – 12mm reinforced, 50mm bolt in king pin

with removable block

Options

Assorted body heights & axle / suspension combinations, wheel, tyre, tarp, toolbox, water tank, air tailgate, access rungs, ladder options all available on request. Other configurations

available include tandem axle from 18.0m3 to tri axle 28.5m3 capacity.

Tare weight 9.00m Nominal7.600 ± 2%

Specifications

Steel Chassis Tipper

Manufactured by;Hamelex White175 South Gippsland HighwayDandenong(03) 8786 2100