About Us Fadersan Plastics and Packaging Industries; has been found in 1992 in Istanbul and started its operations as %100

Turkish-capitalized corporation which has the purpose of rendering service to Turkish Textile and Industry.

Our Company has been established on 1100 square meter indoor space in Istanbul Güneşli and renders service to

textile exporters with its 3 printing presses, 6 extruders, 8 automatic cutting machine and 1 sprocketed cutting

machine.

We are glad to make contributions to your dear associates needs in accordance with intended use by satisfying the all

size and all kind of packaging needs of not only the textile but also the municipalities, store chains and markets,

automotive sub-industry, food sector in short course every sectors which provides service, with our adequate potential

and technological equipments.

Under the conditions of changing world which has no limits and has a great competition, FADERSAN has been

proceeding its operations to constantly searching the better service quality and to be better.

Our Company has every necessary international certificate starting with and including food bag permit certificate.

Within the scope of our quality policy; FADERSAN Plastics and Packaging, operates with a team spirit in every phase

by coalescing.

Considers the qualified, educated, contributor employee who believes in quality, shares the correct information and

on-time delivery.

Believes that the success of the associates will be considered as the national interest and success of the country and

society and this will improve the life quality.

-Vision

Provide the fastest service to our customers by means of our experiences and expert staff.

Our principle; is investing in innovations, sector and our customers,

Our goals; is increasing our exportation, maintaining the constant customer satisfaction.

-Mission

Present the operations which are performed by our expert staff to customers in a fast and qualified manner. Carefully processing the operations which are presented to customers. Making contributions to national economy, society, employees and our customers by using our corporational efficiency and all resources.

-Quality Policy

For obtaining the excellent business results; Constantly increasing the all business process by participation of entire employees, offering the products to customers in accordance with applicable laws and standards. Providing opportunities for personal improvement and motivation of employees, performing the best service with qualified production, on-time delivery and after sales operations. Accomplishing the objectives which were determined within the scope of "Total Quality Manner" to eliminate the all handicaps of service representation by providing the best coordination between the corporate and our customers at home and abroad. Maintaining our wanted corporation feature at sector by constantly growing and reinforcing our goal with our Research&Development operations, are our quality policies.

-Production

Single and double layer extruders are the first phases which shape the plastic, also the first phases that transform the granule plastic raw material into bulk products which have desired specifications. By means of cutting-edge technology, wide amplitude operations and computer control, the product which is prepared in desired dimensions, thickness and color can be attained by using mixtures which are suitable for application features. In Federsan , all of your special orders are prepared for printing process after they have designed by our praticians. The imprints can be carried out up to 6 colors with Flexo technique. Cutting and Packaging Plastic packagings enter the cutting process after the printing and after that they are dispatched after packaging.

References

WHAT IS d2w ?

d2W which was founded by Symphony Environmental Ltd. which we are the representative of them, is a rational,

cost-effective, path-breaking additive which eliminates the environmental problems which are caused by plastics.

d2W provides all kinds of polyethylene and polypropylene material to dissolve as only water, practically soluble

biomass and very few carbon dioxide in the time period which is determined by the producer ( this period may change

from 2 months to 5-7 years optionally ) by not leaving any toxic material behind.

Plastics which were produced with d2w additive have the following advantages :

Physical life of the product may be adjusted during the production process in accordance with consumers needs

however conventional plastics continue to pollute the environment for hundreds of years.

The product can dissolve in all kind of environments including dry ones.

They has the same mechanical durableness as conventional plastics.

They are water and gas impermeable like conventional plastics.

All kind of printing process can be executed on them.

They can be produced as transparent.

They can be produced in the same machines as conventional plastics and no additional process or equipments are

needed during the production process.

It is certified that this product can be used for packaging of every food materials including the frozen foods.

They can be used in high-speed packaging machines (for instance bread packaging machines).

They do not cause any methane emission during the dissolution which is one of the greenhouse gases.

During or after the dissolution, they do not cause any toxic effect to environment and this qualification of them are

certified.

When they dissolve in earth, they enrich the earth with carbon and biomass and therefore they increase the

yieldance.

They can be reutilized by means of recycling process.

They can be added to compost process.

Contributing to protect the environment which is the legacy of our children, is collective responsibility of everybody.

We believe that d2w will make a major contribution to discharging this responsibility and increasing the life quality of

future generations.

PREFENCES

-PE - PP Printed Taped Bags

It is used for packaging of shirt, tricot and confection products, has 20 mm to 100 mm thickness and can be produced in different dimensions as printed and printless and with bottom hood according to wishes.

-Carrier Bags

-Locked Bags

It is produced by LDPE-PP-CPP Rawmaterials. It can be designed and be produced in 20 mm to 200 mm

thicknesses as printed and printless, zippered and with lock in according to wishes.

Sprockets Clothing Bags

-Nacrous Frequency Bags

It is used for Textile-Stationery-Automotive sectors. It can be produced from CPP-BOPP material in 25 mm to

40 mm thicknesses as printed-printless according to wishes.

-Shopping Bags

It is used for all kind of product carrying. It can be produced in 40 mm to 200 mm thicknesses as printed-printless, handled – reinforced -stemmed according to wishes.

-Trash Bags

It is produced from LDPE-HDPE Raw materials. It can be produced 20 mm to 200 mm thicknesses as printed-

printless, single and roll shapes according to wishes.

-Chicken Bags

It can be produced from HDPE Raw material in 40 mm thickness as printed-printless , perforated-wired or with

claps according to wishes.

-Environment-Friendly Bags

It is produced from LDPE-PP-HDPE Raw material. It can be produced 20 mm to 200 mm thicknesses as printed-

printless according to wishes.

It decomposes in nature in between 2 months and 2 years in accordance with customer wishes.

-Printed Bags

Manufactured by AYPE-HDPE-BOPP-CPP-PP materials. Different size and thickness can be printed in six colors

based on customer demand.

-Opp - Cpp Taped Bag

CERTİFİCATES

For more information

http://fadersan.com/tr/

http://fadersan.com/en/

http://fadersan.com/nl/