FAA Airport Protection Standards...for the geometric layout and engineering design of runways,...
Transcript of FAA Airport Protection Standards...for the geometric layout and engineering design of runways,...
![Page 1: FAA Airport Protection Standards...for the geometric layout and engineering design of runways, taxiways, aprons, and other facilities at civil airports. • Part 139 requires some](https://reader033.fdocuments.in/reader033/viewer/2022052815/60a0d3e51d430c2d863ad183/html5/thumbnails/1.jpg)
Presented to:
By:
Date:
FAA Airport Protection Standards
ICAO – Colombia Webinar
Michael Ferry, P.E., Senior Civil Engineer
August 6, 2020
![Page 2: FAA Airport Protection Standards...for the geometric layout and engineering design of runways, taxiways, aprons, and other facilities at civil airports. • Part 139 requires some](https://reader033.fdocuments.in/reader033/viewer/2022052815/60a0d3e51d430c2d863ad183/html5/thumbnails/2.jpg)
Overview
• Airport Design Standards– Focus on Minimum Runway Standards
• Airspace Protection• Challenging Situations
August 6, 2020 FAA Airport Certification Program Overview 2
![Page 3: FAA Airport Protection Standards...for the geometric layout and engineering design of runways, taxiways, aprons, and other facilities at civil airports. • Part 139 requires some](https://reader033.fdocuments.in/reader033/viewer/2022052815/60a0d3e51d430c2d863ad183/html5/thumbnails/3.jpg)
Federal AviationAdministration
Airport Design Standards
• Guidelines for a safe, efficient and economic airport system
• AC 150/5300-13, Airport Design
– Standards and recommendations for the geometric layout and engineering design of runways, taxiways, aprons, and other facilities at civil airports.
• Part 139 requires some of these standards to be met (i.e. RSA)
3
![Page 4: FAA Airport Protection Standards...for the geometric layout and engineering design of runways, taxiways, aprons, and other facilities at civil airports. • Part 139 requires some](https://reader033.fdocuments.in/reader033/viewer/2022052815/60a0d3e51d430c2d863ad183/html5/thumbnails/4.jpg)
Standards
• Critical for safety• How do FAA airports meet standards?
• FAA pays for majority of airside projects• FAA can only pay if grant applications
meet standards• Starts with Planning!
![Page 5: FAA Airport Protection Standards...for the geometric layout and engineering design of runways, taxiways, aprons, and other facilities at civil airports. • Part 139 requires some](https://reader033.fdocuments.in/reader033/viewer/2022052815/60a0d3e51d430c2d863ad183/html5/thumbnails/5.jpg)
Federal AviationAdministration
Focus Today: FAA Minimum Runway Design Standards
• Eight minimum standards– Found in 5300-13– 5 & 8 roughly
equivalent
![Page 6: FAA Airport Protection Standards...for the geometric layout and engineering design of runways, taxiways, aprons, and other facilities at civil airports. • Part 139 requires some](https://reader033.fdocuments.in/reader033/viewer/2022052815/60a0d3e51d430c2d863ad183/html5/thumbnails/6.jpg)
Federal AviationAdministration
Aircraft Design Group (ADG)
• Similar to ICAO
• Example: 737-800– D-III
6
APPROACH SPEED (KNOTS = 142)
Approach Speed Design Group
SpeedApproach = 142 kts112-feet, 7-inches
41-feet, 2-inches
![Page 7: FAA Airport Protection Standards...for the geometric layout and engineering design of runways, taxiways, aprons, and other facilities at civil airports. • Part 139 requires some](https://reader033.fdocuments.in/reader033/viewer/2022052815/60a0d3e51d430c2d863ad183/html5/thumbnails/7.jpg)
Federal AviationAdministration
5300-13 Table 3-5
• Provides design dimensions for most critical design aspects– Example: Most 737s are C-IIIs
![Page 8: FAA Airport Protection Standards...for the geometric layout and engineering design of runways, taxiways, aprons, and other facilities at civil airports. • Part 139 requires some](https://reader033.fdocuments.in/reader033/viewer/2022052815/60a0d3e51d430c2d863ad183/html5/thumbnails/8.jpg)
Federal AviationAdministration
Runway Safety Area (RSA)
• Safety of airplanes undershoot, overrun, or veer off the runway
• Accessibility for firefighting and rescue equipment
• Typical dimensions are 1,000 ft. in length by 500 ft. in width
8
![Page 9: FAA Airport Protection Standards...for the geometric layout and engineering design of runways, taxiways, aprons, and other facilities at civil airports. • Part 139 requires some](https://reader033.fdocuments.in/reader033/viewer/2022052815/60a0d3e51d430c2d863ad183/html5/thumbnails/9.jpg)
RSA Requirements
• No hazardous humps / ruts• Clear except 3” or frangible
• NavAids
• Support ARFF when dry• Drained (grading or inlets)• Isn’t subject to a Modification of
Standard (MOS)
![Page 10: FAA Airport Protection Standards...for the geometric layout and engineering design of runways, taxiways, aprons, and other facilities at civil airports. • Part 139 requires some](https://reader033.fdocuments.in/reader033/viewer/2022052815/60a0d3e51d430c2d863ad183/html5/thumbnails/10.jpg)
Fixed-by-function designation for NAVAIDs
10
![Page 11: FAA Airport Protection Standards...for the geometric layout and engineering design of runways, taxiways, aprons, and other facilities at civil airports. • Part 139 requires some](https://reader033.fdocuments.in/reader033/viewer/2022052815/60a0d3e51d430c2d863ad183/html5/thumbnails/11.jpg)
Runway End Identifier Lights
Precision ApproachPath Indicator Frangible BoltsLow Impact
Resistant Pole
Localizer
Navigational Aids and Equipment
ALSF-2Approach Lighting System
![Page 12: FAA Airport Protection Standards...for the geometric layout and engineering design of runways, taxiways, aprons, and other facilities at civil airports. • Part 139 requires some](https://reader033.fdocuments.in/reader033/viewer/2022052815/60a0d3e51d430c2d863ad183/html5/thumbnails/12.jpg)
Federal AviationAdministration
Runway Obstacle Free Zone (OFZ)
12
RUNWAY OFZPRECISION OFZ
INNER-APPROACH OFZINNER-TRANSITIONAL OFZ
Key Facts:
Only frangible NAVAIDs that need to be inside OFZ because of function is permitted to penetrate the OFZ.
OFZ must be kept clear during operations.
Shape is dependent on the approach minimums and the aircraft on approach
![Page 13: FAA Airport Protection Standards...for the geometric layout and engineering design of runways, taxiways, aprons, and other facilities at civil airports. • Part 139 requires some](https://reader033.fdocuments.in/reader033/viewer/2022052815/60a0d3e51d430c2d863ad183/html5/thumbnails/13.jpg)
Federal AviationAdministration
Obstacle Free Zone (OFZ)
• Four distinct surfaces: – Runway Obstacle Free Zone (ROFZ)
– Inner-Transitional Obstacle Free Zone
– Inner-Approach Obstacle Free Zone
– Precision Obstacle Free Zone (POFZ)
13
![Page 14: FAA Airport Protection Standards...for the geometric layout and engineering design of runways, taxiways, aprons, and other facilities at civil airports. • Part 139 requires some](https://reader033.fdocuments.in/reader033/viewer/2022052815/60a0d3e51d430c2d863ad183/html5/thumbnails/14.jpg)
Federal AviationAdministration
Runway OFZ
• Extends 200 feet beyond each end of runway
• 400 feet for operations by large aircraft
• For operations by small aircraft:– 300 ft for lower than 3/4 statute mile approach visibility minimums
– 250 ft for operations by small aircraft with approach speeds of 50 knots or more
– 120 ft for operations by small aircraft with approach speeds of less than 50 knots
14
![Page 15: FAA Airport Protection Standards...for the geometric layout and engineering design of runways, taxiways, aprons, and other facilities at civil airports. • Part 139 requires some](https://reader033.fdocuments.in/reader033/viewer/2022052815/60a0d3e51d430c2d863ad183/html5/thumbnails/15.jpg)
Inner-Approach OFZ• Applies only to runways with an ALS
• Surface begins 200 ft from runway threshold
• Extends 200 ft beyond last light unit in the ALS
• Same width as ROFZ and has a 50 (horizontal) to 1 (vertical) slope
15
![Page 16: FAA Airport Protection Standards...for the geometric layout and engineering design of runways, taxiways, aprons, and other facilities at civil airports. • Part 139 requires some](https://reader033.fdocuments.in/reader033/viewer/2022052815/60a0d3e51d430c2d863ad183/html5/thumbnails/16.jpg)
Inner-Transitional OFZ• Operations by small aircraft:
– Slopes 3 (horizontal) to 1 (vertical) to a height of 150 feet above the airport elevation
• Operations by large aircraft:– CAT I Operations
• Rises vertically, then slopes 6 to 1 to a height of 150 feet above the airport elevation
– CAT II/III Operations
• Rises vertically, then slopes 5 to 1 to a distance “Y” from runway centerline, and then slopes 6 to 1 out to a height of 150 feet above the airport elevation
16
![Page 17: FAA Airport Protection Standards...for the geometric layout and engineering design of runways, taxiways, aprons, and other facilities at civil airports. • Part 139 requires some](https://reader033.fdocuments.in/reader033/viewer/2022052815/60a0d3e51d430c2d863ad183/html5/thumbnails/17.jpg)
Precision Obstacle Free Zone (POFZ)• Wing of aircraft on a taxiway may penetrate
• Fuselage and tail may not penetrate
• Vehicles up to 10 ft permitted if necessary for maintenance
• The surface is only in effect when:– The approach includes vertical guidance
– The reported ceiling is below 250-feet or visibility is less than 3/4 statute mile
– An aircraft is on final approach within 2 miles of the runway threshold
17
![Page 18: FAA Airport Protection Standards...for the geometric layout and engineering design of runways, taxiways, aprons, and other facilities at civil airports. • Part 139 requires some](https://reader033.fdocuments.in/reader033/viewer/2022052815/60a0d3e51d430c2d863ad183/html5/thumbnails/18.jpg)
Runway Object Free Area (ROFA)• Protects the wings of an
aircraft that enters the RSA
• 2-dimensional area centered on the runway centerline
• Objects in the ROFA should be frangible to 3 inches
18
![Page 19: FAA Airport Protection Standards...for the geometric layout and engineering design of runways, taxiways, aprons, and other facilities at civil airports. • Part 139 requires some](https://reader033.fdocuments.in/reader033/viewer/2022052815/60a0d3e51d430c2d863ad183/html5/thumbnails/19.jpg)
Runway Protection Zone (RPZ)• Enhance the protection of people
and property on the ground.
• Airport owners should own the property to the limits of the RPZ
• Clear of all above-ground objects
• As a minimum, should remain clear of all incompatible facilities
19
![Page 20: FAA Airport Protection Standards...for the geometric layout and engineering design of runways, taxiways, aprons, and other facilities at civil airports. • Part 139 requires some](https://reader033.fdocuments.in/reader033/viewer/2022052815/60a0d3e51d430c2d863ad183/html5/thumbnails/20.jpg)
Federal AviationAdministration
Approach Surface
• Protects arriving aircraft during VFR and IFR conditions
• Surface depends on what aircraft utilizes the runway and on visibility minimums
• Penetrations to surface may result in: – Higher instrument landing minimums– Higher than normal glide path angles– Non-standard threshold crossing heights– Final approach offset
20
![Page 21: FAA Airport Protection Standards...for the geometric layout and engineering design of runways, taxiways, aprons, and other facilities at civil airports. • Part 139 requires some](https://reader033.fdocuments.in/reader033/viewer/2022052815/60a0d3e51d430c2d863ad183/html5/thumbnails/21.jpg)
Approach / Departure Surfaces An evaluation surface that defines the minimum
required obstruction clearance for approach or departure procedures
Based on planned visibility minimums (TERPs determines actual published minimums)
21
A
B C
D E
![Page 22: FAA Airport Protection Standards...for the geometric layout and engineering design of runways, taxiways, aprons, and other facilities at civil airports. • Part 139 requires some](https://reader033.fdocuments.in/reader033/viewer/2022052815/60a0d3e51d430c2d863ad183/html5/thumbnails/22.jpg)
Federal AviationAdministration
Runway to Taxiway Separation
• Minimum distance between a runway and it’s parallel taxiway– Assumes same design group
– High speed exits that allow reverse direction may require additional distance
– Dimensions from Table 3-5
• Protects the RSA and Inner transitional OFZ from taxiing aircraft– Use largest ADG using the TW
22
![Page 23: FAA Airport Protection Standards...for the geometric layout and engineering design of runways, taxiways, aprons, and other facilities at civil airports. • Part 139 requires some](https://reader033.fdocuments.in/reader033/viewer/2022052815/60a0d3e51d430c2d863ad183/html5/thumbnails/23.jpg)
Federal AviationAdministration
23
Taxiway ADG Tail Height
TW
RW-TW Separation
RW
Runway to Taxiway Separation Example
CAT-I ILS
![Page 24: FAA Airport Protection Standards...for the geometric layout and engineering design of runways, taxiways, aprons, and other facilities at civil airports. • Part 139 requires some](https://reader033.fdocuments.in/reader033/viewer/2022052815/60a0d3e51d430c2d863ad183/html5/thumbnails/24.jpg)
Federal AviationAdministration
Runway Visibility Zone (RVZ)
• Maintaining a clear RVZ allows departing and arriving aircraft to verify the location and actions of other aircraft and vehicles on the ground that could create a conflict.
24
![Page 25: FAA Airport Protection Standards...for the geometric layout and engineering design of runways, taxiways, aprons, and other facilities at civil airports. • Part 139 requires some](https://reader033.fdocuments.in/reader033/viewer/2022052815/60a0d3e51d430c2d863ad183/html5/thumbnails/25.jpg)
Airspace Protection
• The navigable airspace is a limited national resource that Congress has charged the FAA to administer in the public interest as necessary to ensure the safety of aircraft and its efficient use.
25
![Page 26: FAA Airport Protection Standards...for the geometric layout and engineering design of runways, taxiways, aprons, and other facilities at civil airports. • Part 139 requires some](https://reader033.fdocuments.in/reader033/viewer/2022052815/60a0d3e51d430c2d863ad183/html5/thumbnails/26.jpg)
Airspace Authority
• Title 14 CFR Part 77 (Regulation versus Standard)• Safe, Efficient Use, & Preservation of the Navigable Airspace
• Title 14 CFR Part 157• Notice for Construction, Alteration and Deactivation of Airports
26
![Page 27: FAA Airport Protection Standards...for the geometric layout and engineering design of runways, taxiways, aprons, and other facilities at civil airports. • Part 139 requires some](https://reader033.fdocuments.in/reader033/viewer/2022052815/60a0d3e51d430c2d863ad183/html5/thumbnails/27.jpg)
Regardless of Federal Funding Participation
27
• Notice requirements under Part 77 (similar to ICAO Annex 14 Chapter 4) does not consider federal funding participation or limited to federally obligated airports.
![Page 28: FAA Airport Protection Standards...for the geometric layout and engineering design of runways, taxiways, aprons, and other facilities at civil airports. • Part 139 requires some](https://reader033.fdocuments.in/reader033/viewer/2022052815/60a0d3e51d430c2d863ad183/html5/thumbnails/28.jpg)
Part 77 Overall View
29
![Page 29: FAA Airport Protection Standards...for the geometric layout and engineering design of runways, taxiways, aprons, and other facilities at civil airports. • Part 139 requires some](https://reader033.fdocuments.in/reader033/viewer/2022052815/60a0d3e51d430c2d863ad183/html5/thumbnails/29.jpg)
• Greater height than imaginary surface on specified slopes
30
• Traverse ways of a height which if adjusted upward
• 17 feet for Interstate Highways• 15 feet for any other public roadways• 10 feet for private roads• 23 feet for railroads• Waterway to height of highest mobile object
to normally traverse3,200+ FEET
< 3,200 FEET
![Page 30: FAA Airport Protection Standards...for the geometric layout and engineering design of runways, taxiways, aprons, and other facilities at civil airports. • Part 139 requires some](https://reader033.fdocuments.in/reader033/viewer/2022052815/60a0d3e51d430c2d863ad183/html5/thumbnails/30.jpg)
Airspace Obstruction Standards
• Obstructions to air navigation affecting airspace safety
• Existing and proposed manmade objects
• Objects of natural growth
• Terrain
31
![Page 31: FAA Airport Protection Standards...for the geometric layout and engineering design of runways, taxiways, aprons, and other facilities at civil airports. • Part 139 requires some](https://reader033.fdocuments.in/reader033/viewer/2022052815/60a0d3e51d430c2d863ad183/html5/thumbnails/31.jpg)
Form and Time of Notice
• FAA form 7460-1• “Notice of Proposed Construction or Alteration”
• Preferred filing method via internet
• Notice must be submitted at least 45 calendar days before:
• Start date of proposed construction or alterationor
• Filing date for construction permit application
32
![Page 32: FAA Airport Protection Standards...for the geometric layout and engineering design of runways, taxiways, aprons, and other facilities at civil airports. • Part 139 requires some](https://reader033.fdocuments.in/reader033/viewer/2022052815/60a0d3e51d430c2d863ad183/html5/thumbnails/32.jpg)
Federal AviationAdministration
33
An FAA Determination issued under this part will be one of the following:
(1) No objection.
(2) Conditional. A conditional determination will identify the objectionable aspects of a project or action and specify the conditions which must be met and sustained to preclude an objectionable determination.
(3) Objectionable. An objectionable determination will specify the FAA's reasons for issuing such a determination.
![Page 33: FAA Airport Protection Standards...for the geometric layout and engineering design of runways, taxiways, aprons, and other facilities at civil airports. • Part 139 requires some](https://reader033.fdocuments.in/reader033/viewer/2022052815/60a0d3e51d430c2d863ad183/html5/thumbnails/33.jpg)
Federal AviationAdministration
Limitations of FAA Authority• The FAA cannot
– Limit structure height– Prohibit construction– Require structures to be marked and/or
lighted (we recommend to prevent objecting)
• FAA will object and issue Determination of Hazard– This prevents structures for communication
(which require Federal license)
34
Structures seldom get built against an unfavorable FAA determination due to implied liability, zoning permits, insurance, state laws.
![Page 34: FAA Airport Protection Standards...for the geometric layout and engineering design of runways, taxiways, aprons, and other facilities at civil airports. • Part 139 requires some](https://reader033.fdocuments.in/reader033/viewer/2022052815/60a0d3e51d430c2d863ad183/html5/thumbnails/34.jpg)
Limitations of the FAA’s Authority
We assess obstructions to:
• Determine the impact the proposed object will have to airspace.
• Work with the Proponent to eliminate any hazard to navigation.
• The FAA needs to know of its existence so it can be charted.
35
![Page 35: FAA Airport Protection Standards...for the geometric layout and engineering design of runways, taxiways, aprons, and other facilities at civil airports. • Part 139 requires some](https://reader033.fdocuments.in/reader033/viewer/2022052815/60a0d3e51d430c2d863ad183/html5/thumbnails/35.jpg)
FAA Wide Protection
• Example: Flight Procedures responsible to ensure published information for IFR procedures is safe
• Will alter published minimums from planned minimums to reflect actual conditions
• Additionally, assesses beyond just design group aircraft
![Page 36: FAA Airport Protection Standards...for the geometric layout and engineering design of runways, taxiways, aprons, and other facilities at civil airports. • Part 139 requires some](https://reader033.fdocuments.in/reader033/viewer/2022052815/60a0d3e51d430c2d863ad183/html5/thumbnails/36.jpg)
Flight Procedures Protection
• Example: Visibility increased due to non-standard conditions
![Page 37: FAA Airport Protection Standards...for the geometric layout and engineering design of runways, taxiways, aprons, and other facilities at civil airports. • Part 139 requires some](https://reader033.fdocuments.in/reader033/viewer/2022052815/60a0d3e51d430c2d863ad183/html5/thumbnails/37.jpg)
Challenging Situations
![Page 38: FAA Airport Protection Standards...for the geometric layout and engineering design of runways, taxiways, aprons, and other facilities at civil airports. • Part 139 requires some](https://reader033.fdocuments.in/reader033/viewer/2022052815/60a0d3e51d430c2d863ad183/html5/thumbnails/38.jpg)
Engineered Material Arrest System (EMAS)
• 116 EMAS installations at 69 airports
• 15 successful arrestments, saving a total of 406 lives on board
![Page 39: FAA Airport Protection Standards...for the geometric layout and engineering design of runways, taxiways, aprons, and other facilities at civil airports. • Part 139 requires some](https://reader033.fdocuments.in/reader033/viewer/2022052815/60a0d3e51d430c2d863ad183/html5/thumbnails/39.jpg)
EMAS INSTALLATIONCharleston Yeager Airport
![Page 40: FAA Airport Protection Standards...for the geometric layout and engineering design of runways, taxiways, aprons, and other facilities at civil airports. • Part 139 requires some](https://reader033.fdocuments.in/reader033/viewer/2022052815/60a0d3e51d430c2d863ad183/html5/thumbnails/40.jpg)
EMAS AIRCRAFT ARRESTMENTUS Airways Flight 2495, Charleston Yeager Airport, January 19, 2010
![Page 41: FAA Airport Protection Standards...for the geometric layout and engineering design of runways, taxiways, aprons, and other facilities at civil airports. • Part 139 requires some](https://reader033.fdocuments.in/reader033/viewer/2022052815/60a0d3e51d430c2d863ad183/html5/thumbnails/41.jpg)
Modification of Standards
• Discussed in next couple of presentations
• Allows unique solutions for unique situations that maintain safety
![Page 42: FAA Airport Protection Standards...for the geometric layout and engineering design of runways, taxiways, aprons, and other facilities at civil airports. • Part 139 requires some](https://reader033.fdocuments.in/reader033/viewer/2022052815/60a0d3e51d430c2d863ad183/html5/thumbnails/42.jpg)
Declared Distances
• Represents the maximum distances for takeoff, rejected takeoff, and landing distances performance requirements
• Declared distances is based on the operational direction and published for each runway end.
• Published in: • Chart Supplement• Airport Master Record• NOTAMs
![Page 43: FAA Airport Protection Standards...for the geometric layout and engineering design of runways, taxiways, aprons, and other facilities at civil airports. • Part 139 requires some](https://reader033.fdocuments.in/reader033/viewer/2022052815/60a0d3e51d430c2d863ad183/html5/thumbnails/43.jpg)
Obtaining Airport Design StandardsThrough the Use of Declared Distances
Departure RPZ
Departure Surface
Runway Safety AreaRunway Object Free Area
TORA
LDA
TODA
ASDA
Runway Safety AreaRunway Object Free Area
Approach SurfaceApproach RPZ
![Page 44: FAA Airport Protection Standards...for the geometric layout and engineering design of runways, taxiways, aprons, and other facilities at civil airports. • Part 139 requires some](https://reader033.fdocuments.in/reader033/viewer/2022052815/60a0d3e51d430c2d863ad183/html5/thumbnails/44.jpg)
Declared Distances
• Takeoff Runway Available (TORA)• Takeoff Distance Available (TODA)• Accelerate Stop Distance Available (ASDA)
DEPARTURE OPERATIONS
ARRIVAL OPERATIONS
Start of TORA, TODA, & ASDA
Start of LDA
Consists of:
Start of TORA, TODA, & ASDA
Start of LDA
• Landing Distance Available (LDA)
![Page 45: FAA Airport Protection Standards...for the geometric layout and engineering design of runways, taxiways, aprons, and other facilities at civil airports. • Part 139 requires some](https://reader033.fdocuments.in/reader033/viewer/2022052815/60a0d3e51d430c2d863ad183/html5/thumbnails/45.jpg)
TORA
TORA
DEPARTURE RUNWAY
PROTECTION ZONE
Incompatible Land Use
DEPARTURE RUNWAY
PROTECTION ZONE
NOT TO SCALE
Shortening TORA
Incompatible Land Use
![Page 46: FAA Airport Protection Standards...for the geometric layout and engineering design of runways, taxiways, aprons, and other facilities at civil airports. • Part 139 requires some](https://reader033.fdocuments.in/reader033/viewer/2022052815/60a0d3e51d430c2d863ad183/html5/thumbnails/46.jpg)
NOT TO SCALE
END OF TODAEND OF TORA
Shortening TODA
![Page 47: FAA Airport Protection Standards...for the geometric layout and engineering design of runways, taxiways, aprons, and other facilities at civil airports. • Part 139 requires some](https://reader033.fdocuments.in/reader033/viewer/2022052815/60a0d3e51d430c2d863ad183/html5/thumbnails/47.jpg)
Extending TODA
CLEARWAY
NOT TO SCALE
END OF TORAEND OF TODA
LiftOff Climb
Wheels off the ground
![Page 48: FAA Airport Protection Standards...for the geometric layout and engineering design of runways, taxiways, aprons, and other facilities at civil airports. • Part 139 requires some](https://reader033.fdocuments.in/reader033/viewer/2022052815/60a0d3e51d430c2d863ad183/html5/thumbnails/48.jpg)
Accelerate Stop Distance Available (ASDA)
Distance to accelerate from brake release to V1 and then decelerate to a stop.
49
V1 Speed
NOT TO SCALE
Brake Release Stop
ASDA
![Page 49: FAA Airport Protection Standards...for the geometric layout and engineering design of runways, taxiways, aprons, and other facilities at civil airports. • Part 139 requires some](https://reader033.fdocuments.in/reader033/viewer/2022052815/60a0d3e51d430c2d863ad183/html5/thumbnails/49.jpg)
ASDA
STOPWAY
ASDA
ASDA
NOT TO SCALE
TYPICAL ASDA
EXTENDED ASDA
SHORTENED ASDA
RUNWAY SAFETY AREA
RUNWAY SAFETY AREA
RUNWAY SAFETY
AREA
![Page 50: FAA Airport Protection Standards...for the geometric layout and engineering design of runways, taxiways, aprons, and other facilities at civil airports. • Part 139 requires some](https://reader033.fdocuments.in/reader033/viewer/2022052815/60a0d3e51d430c2d863ad183/html5/thumbnails/50.jpg)
Accelerate Stop Distance Available (ASDA)
Published accelerate-stop distance requirements for a rejected takeoff (allows incorporating a stopway)
RSA clearance may be obtained beyond the runway by reducing the ASDA
51
RSARSA
ASDA
![Page 51: FAA Airport Protection Standards...for the geometric layout and engineering design of runways, taxiways, aprons, and other facilities at civil airports. • Part 139 requires some](https://reader033.fdocuments.in/reader033/viewer/2022052815/60a0d3e51d430c2d863ad183/html5/thumbnails/51.jpg)
LDA
LDA
RUNWAY SAFETY AREA
NOT TO SCALE
RUNWAY SAFETY AREA
Shortening LDA (with displaced threshold)
![Page 52: FAA Airport Protection Standards...for the geometric layout and engineering design of runways, taxiways, aprons, and other facilities at civil airports. • Part 139 requires some](https://reader033.fdocuments.in/reader033/viewer/2022052815/60a0d3e51d430c2d863ad183/html5/thumbnails/52.jpg)
Questions
53
Michael Ferry, P.E.Senior Civil Engineer, Great Lakes Region
Federal Aviation AdministrationAirports Division - Safety & Standards Branch, AGL-620
2300 East Devon Avenue, Des Plaines, IL 60018 847.294.7531 [email protected]