EXTRUSION - Tria · EXTRUSION Manual feeding at 1,5m from ground of sheets, pipes and profiles 6 m...
3
EXTRUSION Manual feeding at 1,5m from ground of sheets, pipes and profiles 6 m long Single and double traction groups with pneumatic dancing arms and inverter ensures steady feed of edge trim/s ( up to 100m/min) and constant tension with the production machine G rinding chamber with 3, 5 or 7 rotary blades, for processing all resins P LA A B S EP S P ET and all products, expanded, honeycomb, full and deep sheets Special applications for custom systems, cutting devices, inj ectors and infeed rollers, unwinders and special coating Your recycling needs. Our grinding solutions.
Transcript of EXTRUSION - Tria · EXTRUSION Manual feeding at 1,5m from ground of sheets, pipes and profiles 6 m...
EXTRUSIONManual feeding at 1,5m from ground of sheets,pipes and profiles 6 m long
Single and double traction groups with pneumaticdancing arms and inverter ensures steady feedof edge trim/s ( up to 100m/min) and constant tensionwith the production machine
G rinding chamber with 3, 5 or 7 rotary blades,for processing all resins P LA A B S EP S P ET and allproducts, expanded, honeycomb, full and deep sheets
Special applications for custom systems, cuttingdevices, inj ectors and infeed rollers, unwindersand special coating
Your recycling needs. Our grinding solutions.
Efficient solutionsRegrind quality material
Energy efficiency Easy operation and maintenance
Homogeneous and uniform regrind constantlyproduced. Mechanical and physical properties ofplastics unchanged.
Systems supplied to meet all healt and safety requirements and standards. Diverse production range of machines for recovery of scraps of varying size and weight.
Lowest running cost expressed in kWh/kg available on the market. Reaction power cosφ reduced to minimum thus having a direct impact on hourly energy cost.
Reduced mainenance frequency and downtimeby advance engineering design. Safety of operator during use and maintenance.
- Efficient and precise grip thanks to the dedicated grinding chamber section
- Easy tool free access to screen, hopper, cutting chamber
- On board soundproofing for in-line productions
- Transmission design gives higher inertia: only 10% of installed power consumed during non productive operation; 30-50% during grinding time
© Tr
ia 20
16 -
XT01
rev.0
0
System
Our granulators
XT SeriesX T 3530X T 5030X T 6 04 2X T 9 04 2X T 12 04 2X T 7 06 0X T 1106 0X T 1008 0X T 1508 0
TRK SeriesTRK 4 2 2 0TRK 5030
TPL SeriesTP L 5030TP L 6 04 2TP L 9 04 2TP L 1106 0
Y our recycling needs. Our grinding solutions.
TRI A I talywww.triaplastics.com
TRI A A mericaTRI A B razil
TRI A C hinaTRI A G ermany
