External Report Created On 20 Aug 2019 09:20 - airbus.com · This document and all information...

External Report Created On

© Airbus SAS, 2015. All rights reserved. Confidential and proprietary document. This document and all information contained herein is the sole property of Airbus SAS. No intellectual property rights are granted by the delivery of this document or the disclosure of its content. This document shall not be reproduced or disclosed to a third party without the express written consent of Airbus SAS. This document and its content shall not be used for any purpose other than that for which it is supplied.

16 Dec 2019 09:50

1/624

External Shop Process Family Process Specification(PS) / Process Instruction (PI) Couple qualification Status Only for NDT EQUIPMENT SIZES

ARP-ID Company Name Street City ZIP-Code Country Specialist Family Sub Family Process Ref. No. (PS) Title (PS) PS Current Version Ref. No. (PI) Title (PI) PI Current Version Special Process Status Expiry Date Date of last statusupdate

Limitations QCS Ref. Number QCS Title QCSMaterial/shape/thickn

ess scope

Max Width (cm): Max Length (cm): Max Height (cm): First ATP orQualification date

133527 A2C AIR COSTCONTROL

RUE DUCOMMANDANT

COUSTEAU

LISLE JOURDAIN 32600 France N/A 07 Electrical 07-06 Identification ofconnectors

Laser wire and cablemarking by Ultra

Violet UV process

AIPS07-06-001 Laser wire and cablemarking by Ultra

Violet UV process

4 AIPI07-06-001 Lser wire and cablemarking by ultra

violet UV process

A1 Yes QUALIFIED 15/06/2018 10:55:50 02/08/2017 09:39:43

133961 ACB 27 RUE DU RANZAI NANTES CEDEX 3 44319 France N/A 01 JoiningTechniques

01-02 Fastening withbolts and fasteners

Bolt torque tightening AIPS01-02-008 Torque tightening ofscrews, bolts and

nuts

14 AIPI01-02-008 TIGHTENINGTORQUES FORSTRUCTURALFASTENERS

A3 Yes QUALIFIED 19/07/2019 09:49:43 16/01/2015 00:00:00



General assemblyand installation of

fasteners

AIPS01-02-017 General assemblyand installation of

fasteners

4 AIPI01-02-017 General assemblyand installation of

fasteners

3 Yes QUALIFIED 19/07/2019 09:49:43 28/07/2014 00:00:00



Installation of BlindBolts and Blind

Rivets - Pull-type -

AIPS01-02-013 Installation of BlindBolts and Blind


5 AIPI01-02-013 Installation of BlindBolts and Blind


A4 Yes QUALIFIED 19/07/2019 09:49:43 26/02/2016 20:18:06



Preparation of Holesin Fibre Reinforced

Plastic FRP andMixed FRPMetalAssemblies for

Fastening

AIPS01-02-005 Preparation of Holesin Plastic and Mixed

PlasticMetalAssemblies for

Fastening

11 AIPI01-02-005 Preparartion of holesin fibre reinforcedplastic FRP and

mixed FRPMETALassemblies for

fastening

A4 Yes QUALIFIED WITHLIMITATIONS

19/07/2019 09:49:43 Drilling on polyacetaland mixed

(polyacetal / Metal)assemblies

13/02/2017 16:09:27



Preparation of holesin metallic materials

for fastening

AIPS01-02-003 Preparation of Holesin Metallic Materials

for Fastening

8 AIPI01-02-003 Preparation of holesin metallic materials

for fastening


19/07/2019 09:49:43 Only for manual,semi-auto and

automatic drilling

28/07/2014 00:00:00


01-04 Weldling,Brazing, Soldering

Generalrequirements for

welding and alliedprocesses

AIPS01-04-001 Generalrequirements for


4 NO_AIRBUS_PI Yes QUALIFIED 19/07/2019 09:49:44 27/02/2015 00:00:00



Resistance welding AIPS01-04-004 Resistance Welding 5 AIPI01-04-004 RESISTANCEWELDING SPOT

AND SEAMWELDING


19/07/2019 09:49:44 ONLY ON TITANIUMPARTS, SPOT

WELDING DEGRE BAND C; RANGE

0.4:0.4 TO 3.2:3.2

27/02/2015 00:00:00



Tungsten Inert Gaswelding of metallic

materials

ADET0262 REPAIR ORREWORK OF

SHEET METALPARTS BY MANUAL

TIG WELDING

B AIPI01-04-008 TUNGSTEN INERTGAS WELDING

A1 Yes QUALIFIED 19/07/2019 09:49:44 08/01/2016 00:00:00




materials

AIPS01-04-008 Tungsten Inert GasTIG Welding of

Metallic Materials

5 AIPI01-04-008 TUNGSTEN INERTGAS WELDING

A1 Yes QUALIFIED 19/07/2019 09:49:44 08/01/2016 00:00:00

133961 ACB 27 RUE DU RANZAI NANTES CEDEX 3 44319 France N/A 03 Installation,Manufacture,Fabrication

03-09 Cutting ofmetals

Laser cutting of steel,titanium and nickel

alloys

AIPS03-09-001 Laser cutting of steel,titanium and nickel

alloys

5 AIPI03-09-001 LASER CUTTINGOF STEEL,

TITANIUM, ANDNICKEL ALLOYS

2 Yes QUALIFIED WITHLIMITATIONS

29/07/2019 11:10:13 Titanium thicknessrange: 0.8mm ; 1

mm; 1,27 mm;1,4mm; 1,6 mm to3,2 mm and 5 mm

03/03/2016 16:37:58


03-10 Straighteningof metals

Super plastic formingof aluminium alloys

ADET0064 Aluminium alloyssuperplastic forming

C NO_AIRBUS_PI Yes QUALIFIED WITHLIMITATIONS

19/07/2019 09:49:42 CLASSEFONCTIONNELLE2 S ET 3 + PIÈCEF531 20072 200

27/03/2012 00:00:00



Super plastic formingof titanium alloys

ADET0161 Superplastic formingof titanium alloys

C NO_AIRBUS_PI Yes QUALIFIED 19/07/2019 09:49:42 27/08/2008 00:00:00



Super plastic formingof titanium alloys

AIPS03-10-008 Superplastic Formingof Titanium Alloys

7 AIPI03-10-008 Superplastic formingof titanium alloys


19/07/2019 09:49:43 Limited to: - partsclass 2.3 & 3 withstrain class A or B

- parts class2.1 & 2.2 with strain

class A

QCS180600 issue 1 ManufacturingProcess Qualified for

FC 2.2 regardi

Corresponds toQualification

extension of ACBcompany Id 133961to get Manufacturing

Process Qualifi

22/09/2011 00:00:00

133961 ACB 27 RUE DU RANZAI NANTES CEDEX 3 44319 France N/A 05 Paints, Coatings,Filler, Sealant

05-02 Paints,coatings

Application ofexternal paint

systems

AIPS05-02-003 Application ofexternal paint

systems

5 AIPI05-02-003 Application ofexternal paint

systems


19/07/2019 09:49:42 limitation on varnishapplication

21/04/2017 10:46:57


05-05 Sealant Application of nonhardening jointing

compounds

AIPS05-05-006 Application of nonhardening jointing

compounds

4 AIPI05-05-006 APPLICATION OFNON HARDENING

JOINTINGCOMPOUNDS

A3 Yes QUALIFIED 19/07/2019 09:49:45 18/10/2016 09:44:56


05-05 Sealant Sealing of aircraftstructure

AIPS05-05-001 Sealing of aircraftstructure

7 AIPI05-05-001 SEALING OFAIRCRAFT

STRUCTURE


19/07/2019 09:49:45 ONLY USE FORRIVETING

PROCESS / ONLYINTERPOSITION

11/01/2016 00:00:00


05-05 Sealant Wet installation offasteners

AIPS05-05-004 Wet installation offasteners

6 AIPI05-05-004 Wet installation offasteners


19/07/2019 09:49:45 ONLY USE FORRIVETINGPROCESS

11/01/2016 00:00:00

133961 ACB 27 RUE DU RANZAI NANTES CEDEX 3 44319 France N/A 06 Bonding 06-01 Pre-treatment Mechanical surfacepreparation of non-structural adherend

prior to adhesivebonding

AIPS06-01-004 Mechanical surfacepreparation of non-structural adherend


2 AIPI06-01-004 MECHANICALSURFACE

PREPARATION OFNON-STRUCTURALADHEREND PRIOR

TO ADHESIVEBONDING

A2 Yes QUALIFIED 19/07/2019 09:49:45 18/10/2016 09:26:00

133961 ACB 27 RUE DU RANZAI NANTES CEDEX 3 44319 France N/A 06 Bonding 06-01 Pre-treatment Surface preparationof adherends forsilicone based

ahesives sealants

AIPS06-01-008 Surface preparationofl adherends for

silicone basedahesives sealants

1 AIPI06-01-008 Surface preparationof adherends forsilicone based

adhesivessealants

1 Yes QUALIFIED 19/07/2019 09:49:45 23/12/2016 10:08:00

133961 ACB 27 RUE DU RANZAI NANTES CEDEX 3 44319 France N/A 06 Bonding 06-02 Manufacture Non-structuralAdhesive bonding.

AIPS06-02-002 Non-structuraladhesive bonding

4 AIPI06-02-002 NON STRUCTURALADHESIVEBONDING

A3 Yes QUALIFIED 19/07/2019 09:49:45 18/10/2016 09:34:05

133961 ACB 27 RUE DU RANZAI NANTES CEDEX 3 44319 France N/A Non DestructiveTesting

AITM6-9 DirectReading

ElectricalConductivity

EN2004-1 ElectricalConductivity

NO_AIRBUS_PI Yes QUALIFIED 19/07/2019 09:49:44 06/03/2018 12:57:23

133961 ACB 27 RUE DU RANZAI NANTES CEDEX 3 44319 France N/A TBD TBD Linear FrictionWelding

AIPS01-04-019 Linear FrictionWelding for Titanium

Alloys

4 NO_AIRBUS_PI Yes QUALIFIED 19/07/2019 09:49:43 17/05/2016 15:21:32

134349 ADEL WIGGINSGROUP

TRANSDIGM INC

5000 TRIGGSSTREET

LOS ANGELES 90022 USA N/A Non DestructiveTesting

AITM6-0Measurement

Measure ResistanceOf Electrical Bonding

Points

AITM6-9008 Electrical bondingMeasure resistanceof electrical bonding

points

4 AITM6-9008 Electrical bondingMeasure resistanceof electrical bonding

points


17/06/2019 08:40:06 Two pointmeasurement

method - M9 with500VDC measuring

Current andcalculation of

resistence (methodenforced by Airbus

Soecification

20/05/2019 12:35:51

134656 SAFRANAEROSYSTEMS

4 RUE LESAGEMAILLE

CAUDEBEC LESELBEUF

76320 France N/A 01 JoiningTechniques


Bolt torque tightening ADET0030 Structural bolttightening torques

P IPDA71-03 APPL COUPLESERRAGE

BOULONNERIESTRUCTUR


28/11/2018 13:57:47 Limitation to de-icingsystem

08/03/2017 11:27:05

134656 SAFRANAEROSYSTEMS

4 RUE LESAGEMAILLE

CAUDEBEC LESELBEUF

76320 France N/A 05 Paints, Coatings,Filler, Sealant


ADET0082 Application ofsealants

M IPDA77-01 DEFROSTING -APPLICATION OF

SEALANTS


28/11/2018 13:57:48 Limitation to de-icingsystem

08/03/2017 11:35:00

134684 CTRM AEROCOMPOSITES SDNBHD COMPOSITE

TECHNOLOGY CITY

COMPOSITESTECHNOLOGY CITY

MELAKA 75300 Malaysia N/A 01 JoiningTechniques


Bolt torque tightening ABP2-2336 COMMONREQUIREMENTSFOR INSTALLINGBOLTS, STUDS,

NUTS AND OTHERFASTENING

PARTS.

7 ABP2-2336 COMMONREQUIREMENTSFOR INSTALLINGBOLTS, STUDS,


PARTS.

7 Yes QUALIFIED 05/09/2018 16:10:05 14/12/2009 00:00:00


TECHNOLOGY CITY





nuts


A3 Yes QUALIFIED 05/09/2018 16:10:09 28/04/2014 00:00:00


TECHNOLOGY CITY





fasteners


fasteners


fasteners

3 Yes QUALIFIED 05/09/2018 16:10:09 15/01/2018 08:57:06


TECHNOLOGY CITY






ABP2-1067 RIVETING WITHBLIND RIVETS

3 ABP2-1067 RIVETING WITHBLIND RIVETS

3 Yes QUALIFIED 05/09/2018 16:10:04 14/12/2009 00:00:00


TECHNOLOGY CITY






ABP2-1069 RIVETING WITHBLIND FLUSH

BREAK RIVETSAVDEL MBC

1-4 ABP2-1069 RIVETING WITHBLIND FLUSH


1-4 Yes QUALIFIED 05/09/2018 16:10:04 14/12/2009 00:00:00


TECHNOLOGY CITY






ABP2-2077 MANUALFASTENING WITH

BLIND BOLTSCOMPOSI-LOK

1 ABP2-2077 MANUALFASTENING WITH

BLIND BOLTSCOMPOSI-LOK

1 Yes QUALIFIED 05/09/2018 16:10:04 14/12/2009 00:00:00



16 Dec 2019 09:50

2/624




ess scope



TECHNOLOGY CITY










A4 Yes QUALIFIED 05/09/2018 16:10:09 24/03/2015 00:00:00


TECHNOLOGY CITY




Installation of parallelshank threaded

fasteners

ABP2-2075 MANUALFASTENING WITHSHORT THREAD

POINT DRIVEBOLTS

8 ABP2-2075 MANUALFASTENING WITHSHORT THREAD

POINT DRIVEBOLTS

8 Yes QUALIFIED 05/09/2018 16:10:04 14/12/2009 00:00:00


TECHNOLOGY CITY





fasteners

AIPS01-02-022 Installation of parallelshank threaded

fasteners

4 AIPI01-02-022 INSTALLINGTHREADED

CYLINDRICALFASTENERS

A2 Yes QUALIFIED 05/09/2018 16:10:10 13/03/2018 08:38:52


TECHNOLOGY CITY






Fastening

ABP6-2183 MACHININGCOMPOSITES

2-2 ABP6-2183 MACHININGCOMPOSITES

2-2 Yes QUALIFIED 05/09/2018 16:10:08 14/12/2009 00:00:00


TECHNOLOGY CITY






Fastening



Fastening



fastening

A4 Yes QUALIFIED 05/09/2018 16:10:09 27/10/2016 10:24:40


TECHNOLOGY CITY



01-03 Inserts,Locking

Installation of metallicinserts acres sleeves

ABP2-3095 INSTALLINGMETALLIC INSERTS

ACRES SLEEVES

2 ABP2-3095 INSTALLINGMETALLIC INSERTS

ACRES SLEEVES

2 Yes QUALIFIED 05/09/2018 16:10:05 14/12/2009 00:00:00


TECHNOLOGY CITY




Installation of metallicinserts acres sleeves

AIPS01-03-005 Installation of metallicinserts Acres sleeves

5 AIPI01-03-005 Installation of metallicinserts Acres sleeves

2 Yes QUALIFIED 12/12/2019 11:56:17 05/01/2016 00:00:00


TECHNOLOGY CITY




Manual fastening of2- or 4- start quickrelease fasteners

with or without acressleeves

ABP2-2081 MANUALFASTENING WITH4-START QUICK

RELEASEFASTENERS

3 ABP2-2081 MANUALFASTENING WITH4-START QUICK

RELEASEFASTENERS

3 Yes QUALIFIED 05/09/2018 16:10:05 14/12/2009 00:00:00


TECHNOLOGY CITY






AIPS01-03-002 Manual fastening of2- or 4- start quickrelease fasteners


5 AIPI01-03-002 Manual fastening of2- or 4- start quickrelease fasternerswith oder without

acres sleeves

1 Yes QUALIFIED 12/12/2019 11:49:22 05/01/2016 00:00:00


TECHNOLOGY CITY


MELAKA 75300 Malaysia N/A 02 SurfaceTreatments

02-05 Phosphating,chromate conversion,

passivation

Chemical conversioncoating

ABP1-5057 CONVERSIONCOATING OFALUMINIUM

6 ABP1-5057 CONVERSIONCOATING OFALUMINIUM

6 Yes QUALIFIED 05/09/2018 16:10:04 14/12/2009 00:00:00


TECHNOLOGY CITY


MELAKA 75300 Malaysia N/A 03 Installation,Manufacture,Fabrication

03-02 Compositestructural, non-

metallic

Manufacture ofstructural sandwich

parts withthermosetting fibre

reinforced skins

ABP6-2185 MANUFACTURE OFCARBON-FIBRE

EPOXY PREPREGCOMPOSITES BY

AUTOCLAVE

7 ABP6-2185 MANUFACTURE OFCARBON-FIBRE

EPOXY PREPREGCOMPOSITES BY

AUTOCLAVE


05/09/2018 16:10:08 ADDITION OFAUTHORISATION

TO PROCEED FORHONEYCOMB

FORMING FORSINGLE AISLE FLAP

TRACK FAIRINGSWORK PACKAGEREF: TS/AD/262PENDING FIRST

ARTICLEACCEPTANCE

19/04/2012 00:00:00


TECHNOLOGY CITY




metallic



reinforced skins

ABP6-2189 MANUFACTURE OFGLASS-FIBRE AND

ARAMID-FIBREEPOXY PREPREGCOMPOSITES BY

AUTOCLAVE

7 ABP6-2189 MANUFACTURE OFGLASS-FIBRE AND

ARAMID-FIBREEPOXY PREPREGCOMPOSITES BY

AUTOCLAVE

7 Yes QUALIFIED 05/09/2018 16:10:08 29/05/2012 00:00:00


TECHNOLOGY CITY




metallic



reinforced skins

AIPS03-02-018 Manufacture ofStructural Sandwich

Parts withThermosetting Fiber

Reinforced Skins

7 AIPI03-02-018 Manufacture ofStructural Sandwich

Parts withThermosetting Fiber

Reinforced Skins

A3 Yes QUALIFIED 05/09/2018 16:10:10 30/07/2012 00:00:00


TECHNOLOGY CITY




metallic

Manufacturing ofCFRP and GFRP

with thermosetprepreg material

AIPS03-02-019 Manufacture ofMonolithic Parts withThermoset Prepreg

Materials

11 AIPI03-02-019 Manufacture ofMonolithic Parts withThermoset Prepreg

Materials

A3 Yes QUALIFIED 05/09/2018 16:12:26 20/04/2012 00:00:00


TECHNOLOGY CITY



03-07 Composites,non-structural

Machining of fibrereinforced plasticFRP components

AIPS03-07-002 Machining of fibrereinforced plasticFRP components

7 AIPI03-07-002 Machining of FibreReinforced PlasticFRP Components


05/09/2018 16:12:26 ONLYMONOLYTHICCOMPOSITES

19/06/2013 00:00:00


TECHNOLOGY CITY



03-08 Rework ofComposites

Rework of StructuresManufactured from

Composite MaterialsLaminates and

Sandwich

AIPS03-08-003 Rework of StructuresManufactured from

Composite MaterialsLaminates and

Sandwich

5 AIPI03-08-003 Rework of structuresmanufactured fromcomposite materials

laminates andsandwich


05/09/2018 16:12:26 FOR REPAIRSAUTHORISED BY

CONCESSION ANDREWORK AS PER

AIPI 03-08-003

08/06/2012 00:00:00


TECHNOLOGY CITY


MELAKA 75300 Malaysia N/A 05 Paints, Coatings,Filler, Sealant

05-01 Primer Application of basicprimer

ABP4-1123 APPLICATION OFCORROSION

INHIBITING PRIMERTO AN INTERNAL

OR EXTERNALSURFACE

25 ABP4-1123 APPLICATION OFCORROSION


OR EXTERNALSURFACE

25 Yes QUALIFIED 05/09/2018 16:10:05 14/12/2009 00:00:00


TECHNOLOGY CITY




Application of anti-erosion paint

ABP4-2133 APPLICATION OFEROSION

RESISTANT PAINT

7 ABP4-2133 APPLICATION OFEROSION

RESISTANT PAINT

7 Yes QUALIFIED 05/09/2018 16:10:06 14/12/2009 00:00:00


TECHNOLOGY CITY




Application of anti-static paints oncomposite parts

ABP4-2125 Application of anti-static paints to

composites excludingcarbon fibre

1 ABP4-2125 Application of anti-static paints to

composites excludingcarbon fibre

1 Yes QUALIFIED 05/09/2018 16:10:05 14/12/2009 00:00:00


TECHNOLOGY CITY




APPLICATION OFBONDING PRIMER

AS EROSIONRESISTANTCOATING

ABP4-1121 APPLICATION OFBONDING PRIMER


4 ABP4-1121 APPLICATION OFBONDING PRIMER


4 Yes QUALIFIED 05/09/2018 16:10:05 14/12/2009 00:00:00


TECHNOLOGY CITY





systems

ABP4-2126 APPLICATION OFPOLYURETHANE

FINISH PAINTS TOAN INTERNAL OR

EXTERNALSURFACE

6 ABP4-2126 APPLICATION OFPOLYURETHANE


EXTERNALSURFACE

6 Yes QUALIFIED 05/09/2018 16:10:06 14/12/2009 00:00:00


TECHNOLOGY CITY





systems

ABP4-2127 APPLICATION OFFLEXIBLE FINISHPAINT SCHEME

INCORPORATING ACHROMATED

PRIMER TO ANEXTERNALSURFACE

18 ABP4-2127 APPLICATION OFFLEXIBLE FINISHPAINT SCHEME



18 Yes QUALIFIED 05/09/2018 16:10:06 14/12/2009 00:00:00


TECHNOLOGY CITY





systems


INCORPORATING ACHROMATE-FREE



INCORPORATING ACHROMATE-FREE


8 Yes QUALIFIED 05/09/2018 16:10:06 14/12/2009 00:00:00


TECHNOLOGY CITY





systems


systems


systems

2 Yes QUALIFIED 05/09/2018 16:12:26 18/10/2012 00:00:00


TECHNOLOGY CITY




Application ofstructural paints

ABP4-2130 APPLICATION OFFLEXIBLE FINISH

PAINT TO ANINTERNALSURFACE

16 ABP4-2130 APPLICATION OFFLEXIBLE FINISH


16 Yes QUALIFIED 05/09/2018 16:10:06 14/12/2009 00:00:00


TECHNOLOGY CITY





ABP4-3135 APPLICATION OFFILLER TO SMALL

HOLES

6 ABP4-3135 APPLICATION OFFILLER TO SMALL

HOLES

6 Yes QUALIFIED 05/09/2018 16:10:06 14/12/2009 00:00:00


TECHNOLOGY CITY





ABP4-3350 APPLICATION OFPINHOLE FILLER

2 ABP4-3350 APPLICATION OFPINHOLE FILLER

2 Yes QUALIFIED 05/09/2018 16:10:07 14/12/2009 00:00:00



16 Dec 2019 09:50

3/624




ess scope



TECHNOLOGY CITY





AIPS05-02-009 Application ofstructural paints

5 AIPI05-02-009 APPLICATION OFSTRUCTURAL

PAINTS

A3 Yes QUALIFIED 05/09/2018 16:12:26 27/07/2011 00:00:00


TECHNOLOGY CITY




Rework of paints onmetallic and

nonmetallic structuralparts

AIPS05-02-011 Rework of paints onmetallic and non-metallic structural

parts

5 AIPI05-02-011 Rework of paints onmetallic and non-metallic structural

parts

2 Yes QUALIFIED 05/09/2018 16:12:26 08/04/2011 00:00:00


TECHNOLOGY CITY



05-05 Sealant Application of lowadhesion sealants

ABP4-5142 APPLICATION OFSEALANT FOR

GENERALAIRCRAFT

STRUCTURE

16 ABP4-5142 APPLICATION OFSEALANT FOR

GENERALAIRCRAFT

STRUCTURE

16 Yes QUALIFIED 05/09/2018 16:10:07 14/12/2009 00:00:00


TECHNOLOGY CITY




compounds

ABP4-5144 APPLICATION OFNON-HARDENING

JOINTINGCOMPOUNDS AS

SEALANT

5 ABP4-5144 APPLICATION OFNON-HARDENING


SEALANT

5 Yes QUALIFIED 05/09/2018 16:10:07 14/12/2009 00:00:00


TECHNOLOGY CITY



05-05 Sealant Preservation of CutEdges of CarbonFibre CompositeParts to prevent

Galvanic Corrosionon attached Metal

Parts

AIPS05-05-009 Preservation of CutEdges of CarbonFibre CompositeParts to prevent


Parts

2 AIPI05-05-009 Preservation of CutEdges of CarbonFibre CompositeParts to prevent


Parts

A4 Yes QUALIFIED 19/12/2018 09:05:44 20/04/2012 00:00:00


TECHNOLOGY CITY



05-05 Sealant Process for themanufature of form-in-place seals using

sealants

ABP6-4221 MANUFACTURE OFFORM-IN-PLACE

SEALS USINGSEALANT

4 ABP6-4221 MANUFACTURE OFFORM-IN-PLACE

SEALS USINGSEALANT

4 Yes QUALIFIED 05/09/2018 16:10:08 14/12/2009 00:00:00


TECHNOLOGY CITY




sealants

AIPS05-05-005 Process for themanufacture of form-in-place seals using

sealant

3 AIPI05-05-005 Process for themanufacture of form-in-place seals using

sealant

A2 Yes QUALIFIED 20/12/2018 15:24:11 18/10/2012 00:00:00


TECHNOLOGY CITY




ABP4-3329 APPPLICATION OFAERODYNAMIC

FILLER SEALANT

4 ABP4-3329 APPPLICATION OFAERODYNAMIC

FILLER SEALANT

4 Yes QUALIFIED 05/09/2018 16:10:07 14/12/2009 00:00:00


TECHNOLOGY CITY






STRUCTURE

A4 Yes QUALIFIED 05/09/2018 16:12:26 19/12/2017 14:29:59


TECHNOLOGY CITY



05-05 Sealant Surface protection offasteners andsealants by

application of varnish

AIPS05-05-003 Surface protection offasteners andsealants by


3 AIPI05-05-003 Surface protection offasteners andsealants by


A5 Yes QUALIFIED 20/12/2018 15:24:11 28/04/2014 00:00:00


TECHNOLOGY CITY






A4 Yes QUALIFIED 21/11/2018 15:15:57 06/12/2017 09:49:36


TECHNOLOGY CITY


MELAKA 75300 Malaysia N/A 06 Bonding 06-01 Pre-treatment Mechanical surfacepreparation of non-structural adherend






TO ADHESIVEBONDING

A2 Yes QUALIFIED 21/11/2018 18:49:19 19/11/2018 18:15:43


TECHNOLOGY CITY


MELAKA 75300 Malaysia N/A 06 Bonding 06-01 Pre-treatment Surface preparationfor thermosetting

parts beforestructural bonding

AIPS06-01-003 Surface Preparationfor Thermosetting


5 AIPI06-01-003 Surface preparationfor thermosetting


A3 Yes QUALIFIED 22/01/2019 09:18:34 29/05/2012 00:00:00


TECHNOLOGY CITY


MELAKA 75300 Malaysia N/A 06 Bonding 06-02 Manufacture Non-structuralAdhesive bonding.

ABP5-1149 ADHESIVEBONDING WITH

TWO PART EPOXY.HYSOL AND 3M

4 ABP5-1149 ADHESIVEBONDING WITH

TWO PART EPOXY.HYSOL AND 3M

4 Yes QUALIFIED 22/01/2019 09:19:31 14/12/2009 00:00:00


TECHNOLOGY CITY



ABP5-1153 ADHESIVEBONDING OF

SILICONE RUBBERWITH SILICONE

ADHESIVE

4 ABP5-1153 ADHESIVEBONDING OF

SILICONE RUBBERWITH SILICONE

ADHESIVE

4 Yes QUALIFIED 22/01/2019 09:21:33 29/05/2012 00:00:00


TECHNOLOGY CITY




TWO PART EPOXYARALDITE



4 Yes QUALIFIED 22/01/2019 09:20:25 14/12/2009 00:00:00


TECHNOLOGY CITY




TWO PARTACRYLIC


TWO PARTACRYLIC

11 Yes QUALIFIED 22/01/2019 09:23:46 18/10/2012 00:00:00


TECHNOLOGY CITY



ABP5-1164 ADHESIVEBONDING OFCURED FIBREREINFORCEDCOMPOSITES

2 ABP5-1164 ADHESIVEBONDING OFCURED FIBREREINFORCEDCOMPOSITES

2 Yes QUALIFIED 22/01/2019 09:25:00 14/12/2009 00:00:00


TECHNOLOGY CITY





A3 Yes QUALIFIED 21/11/2018 18:50:32 02/04/2012 00:00:00


TECHNOLOGY CITY


MELAKA 75300 Malaysia N/A 07 Electrical 07-01 Assembly Electrical bonding ABP7-1245 ELECTRICALBONDING ANDEARTHING FOR

AIRBUSREQUIREMENTS

DURINGASSEMBLY

9 ABP7-1245 ELECTRICALBONDING ANDEARTHING FOR

AIRBUSREQUIREMENTS

DURINGASSEMBLY


05/09/2018 16:10:09 LIMITED ASDEFINED IN BVTI

ACT/AB TECH 0034ISSUE 8, AC/AB

TECH 0040 ISSUE 6& AC/AB TECH 0043

ISSUE 1.

26/02/2018 12:18:31


TECHNOLOGY CITY


MELAKA 75300 Malaysia N/A 07 Electrical 07-01 Assembly Electrical bonding ABP7-1246 ELECTRICALBONDING ANDEARTHING FOR

AIRBUSREQUIREMENTS

DURINGASSEMBLY


AIRBUSREQUIREMENTS

DURINGASSEMBLY

9 Yes QUALIFIED 05/09/2018 16:10:09 14/12/2009 00:00:00


TECHNOLOGY CITY


MELAKA 75300 Malaysia N/A 07 Electrical 07-01 Assembly Electrical bonding AIPS07-01-006 Electrical bonding 9 AIPI07-01-006 Electrical Bonding B1 Yes QUALIFIED WITHLIMITATIONS

20/12/2018 15:24:10 LIMITATION FORASSEMBLY

PROCESS 12, SPMETHOD 11, FPMETHOD 3 AND

BONDING CLASS 3

28/04/2014 00:00:00


TECHNOLOGY CITY


MELAKA 75300 Malaysia N/A 09 Cleaning, De-oxidation, Pickling,Chemical Coating

09-04 Masking Surface preparationprior to external paint

application

AIPS09-04-001 Surface preparationprior to external paint

application

2 AIPI09-04-001 Surface preparationprior to external paint

application

2 Yes QUALIFIED 20/12/2018 15:24:10 10/12/2013 00:00:00


TECHNOLOGY CITY


MELAKA 75300 Malaysia N/A Non DestructiveTesting

AITM6-0Measurement


Points


points


points


21/11/2018 18:51:45 LIMITATION TOTEST METHOD # 1

28/04/2014 00:00:00


TECHNOLOGY CITY



AITM6-0 NDI generic Non DestructiveInspection of

Composite Parts

ABP6-5233 TESTINGCOMPOSITES BY

ULTRASONIC FLAWDETECTION

6 ABP6-5233 TESTINGCOMPOSITES BY

ULTRASONIC FLAWDETECTION

6 Yes QUALIFIED 05/09/2018 16:10:09 05/06/2014 00:00:00


TECHNOLOGY CITY



AITM6-4 Ultrasonic Throughtransmission

ultrasonic inspectionof CFRP and

sandwich

AITM6-4002 Ultrasonic throughtransmission

Inspection of fibrecomposite

7 AITM6-4002 Ultrasonic throughtransmission

Inspection of fibrecomposite

7 Yes QUALIFIED 21/12/2018 12:55:54 12/11/2012 00:00:00


TECHNOLOGY CITY



AITM6-4 Ultrasonic Ultrasonic pulse echoinspection of CFRP

AITM6-4005 Ultrasonic pulse-echo inspection of

carbon fibre plastics

11 AITM6-4005 Ultrasonic pulse-echo inspection of

carbon fibre plastics

10 Yes QUALIFIED 21/11/2018 16:11:05 12/11/2012 00:00:00


TECHNOLOGY CITY



AITM6-4 Ultrasonic Ultrasonic pulse-echo inspection of

areas aroundfastener and rivet

holes in composites

AITM6-4022 Ultrasonic pulse-echo inspection of


holes in composites

3 AITM6-4022 Ultrasonic pulse-echo inspection of


holes in composites

3 Yes QUALIFIED 21/12/2018 12:55:54 12/11/2012 00:00:00


TECHNOLOGY CITY



AITM6-4 Ultrasonic Ultrasonic testing ofmetallic materials

plates, bars,extrusions and

blanks

ABP0-2017 SUPPLY OFALUMINIUM PLATEWITH ULTRASONICFLAW DETECTION

2 NA Yes QUALIFIED 05/09/2018 16:10:03 14/12/2009 00:00:00



16 Dec 2019 09:50

4/624




ess scope


134705 AEROFABRICATIONS

COMMON LANE WATNALL NG16 1HA United Kingdom N/A 01 JoiningTechniques


Bolt torque tightening 80-T-34-3050 Tightening of Screwsand Nuts

80-T-34-3050 Tightening of Screwsand Nuts

Yes QUALIFIED 26/03/2015 00:00:00 25/03/2015 00:00:00




Bolt torque tightening ABP2-2336 COMMONREQUIREMENTSFOR INSTALLINGBOLTS, STUDS,


PARTS.

7 ABP2-2336 COMMONREQUIREMENTSFOR INSTALLINGBOLTS, STUDS,


PARTS.

7 Yes QUALIFIED 30/11/2009 00:00:00 30/11/2009 00:00:00





nuts



15/10/2018 11:30:34 Manual Tighteningonly

10/06/2013 00:00:00





fasteners

80-T-34-3001 Installation ofFasteners and Nuts

80-T-34-3001 Installation ofFasteners and Nuts

Yes QUALIFIED 04/04/2017 12:14:40 25/03/2015 00:00:00





fasteners


fasteners


fasteners

3 Yes QUALIFIED 26/07/2018 15:08:41 10/06/2013 00:00:00






80-T-34-5822 Installation of NASBlind Rivets and MS-NASM- ans EN Blind

Bolts

80-T-34-5822 Installation of NASBlind Rivets and MS-NASM- ans EN Blind

Bolts

Yes QUALIFIED 26/03/2015 00:00:00 230.00 90.00 80.00 25/03/2015 00:00:00






ABP2-1065 RIVETING WITHBLIND NUT PLATE

RIVETS

2 ABP2-1065 RIVETING WITHBLIND NUT PLATE

RIVETS

2 Yes QUALIFIED 30/11/2009 00:00:00 30/11/2009 00:00:00






ABP2-1066 RIVETING WITHBLIND STEM LOCK

RIVETS AVDEL

1 ABP2-1066 RIVETING WITHBLIND STEM LOCK

RIVETS AVDEL

1 Yes QUALIFIED 30/11/2009 00:00:00 30/11/2009 00:00:00








3 Yes QUALIFIED 30/11/2009 00:00:00 30/11/2009 00:00:00







CHOBERT


CHOBERT

1 Yes QUALIFIED 30/11/2009 00:00:00 230.00 90.00 80.00 30/11/2009 00:00:00






ABP2-1069 RIVETING WITHBLIND FLUSH


1-4 ABP2-1069 RIVETING WITHBLIND FLUSH


1-4 Yes QUALIFIED 30/11/2009 00:00:00 30/11/2009 00:00:00











27/11/2019 09:28:40 Rivets only. Plasticsand AluminumAssemblies.

28/10/2019 12:07:57




Installation ofbushes, shrink and

press fit

ABP2-2082 SHRINK FITTINGOF BOLTS BUSHESPINS AND OTHER

FASTENING PARTS

2 ABP2-2082 SHRINK FITTINGOF BOLTS BUSHESPINS AND OTHER

FASTENING PARTS

2 Yes QUALIFIED 30/11/2009 00:00:00 230.00 90.00 80.00 30/11/2009 00:00:00





fasteners

AIPS01-02-022 Installation of parallelshank threaded

fasteners

4 AIPI01-02-022 INSTALLINGTHREADED

CYLINDRICALFASTENERS

A2 Yes QUALIFIED 16/09/2019 10:40:23 12/10/2018 15:16:52






Fastening

80-T-30-9910 Drilling, Reaming andCountersinking ofRivet and Screw

Holes

80-T-30-9910 Drilling, Reaming andCountersinking ofRivet and Screw

Holes

Yes QUALIFIED 26/03/2015 00:00:00 25/03/2015 00:00:00






Fastening



Fastening



fastening

A4 Yes AUTHORISATIONTO PROCEED WITH

LIMITATIONS

2020-03-31 27/11/2019 09:30:53 Manual Drilling Only 08/11/2019 10:20:32





for fastening

ABP2-3097 PREPARATION OFCOUNTERSUNK

HOLES INMETALLIC

MATERIALS FORFASTENING AND

RIVETING

1 ABP2-3097 PREPARATION OFCOUNTERSUNK

HOLES INMETALLIC

MATERIALS FORFASTENING AND

RIVETING

1 Yes QUALIFIED 30/11/2009 00:00:00 30/11/2009 00:00:00





for fastening

ABP6-3205 FABRICATION ANDDEBURRING OF

HOLES INMETALLIC

MATERIALS

1 ABP6-3205 FABRICATION ANDDEBURRING OF

HOLES INMETALLIC

MATERIALS

1 Yes QUALIFIED 30/11/2009 00:00:00 30/11/2009 00:00:00





for fastening

AIPS01-02-003 Preparation of Holesin Metallic Materials

for Fastening

8 AIPI01-02-003 Preparation of holesin metallic materials

for fastening

A1 Yes QUALIFIED 20/09/2018 16:27:52 10/06/2013 00:00:00






ABP2-2081 MANUALFASTENING WITH4-START QUICK

RELEASEFASTENERS

3 ABP2-2081 MANUALFASTENING WITH4-START QUICK

RELEASEFASTENERS

3 Yes QUALIFIED 30/11/2009 00:00:00 30/11/2009 00:00:00






AIPS01-03-002 Manual fastening of2- or 4- start quickrelease fasteners


5 AIPI01-03-002 Manual fastening of2- or 4- start quickrelease fasternerswith oder without

acres sleeves

1 Yes QUALIFIED 16/09/2019 10:39:21 12/10/2018 15:36:30




Brazing of MetallicMaterials

ABP2-4099 APPROVAL OFWELDING AND

BRAZINGOPERATORS

9 ABP2-4099 APPROVAL OFWELDING AND

BRAZINGOPERATORS

9 Yes QUALIFIED 30/11/2009 00:00:00 30/11/2009 00:00:00





ABP2-4105 MANUAL BRAZINGOF STEELS

COPPER ANDNICKEL ALLOYS

3 ABP2-4105 MANUAL BRAZINGOF STEELS

COPPER ANDNICKEL ALLOYS

3 Yes QUALIFIED 30/11/2009 00:00:00 0.00 0.00 0.00 30/11/2009 00:00:00





ABP2-4106 MANUAL BRAZINGOF ALUMINIUMUSING SILICON

ROD

6 ABP2-4106 MANUAL BRAZINGOF ALUMINIUMUSING SILICON

ROD

6 Yes QUALIFIED 30/11/2009 00:00:00 30/11/2009 00:00:00




Generalrequirements for


80-T-34-6620 Inert Gas FusionWelding TIG

80-T-34-6620 Inert Gas FusionWelding TIG

Yes QUALIFIED 10/04/2018 16:07:02 25/03/2015 00:00:00




Plasma Arc Weldingof Metallic Materials

ABP2-4355 ACCEPTANCESTANDARDS FORTUNGSTEN INERT

GAS T.I.G.PLASMA ARC

WELDING P.A.W.PROCESSES

4 ABP2-4355 ACCEPTANCESTANDARDS FORTUNGSTEN INERT

GAS T.I.G.PLASMA ARC

WELDING P.A.W.PROCESSES

4 Yes QUALIFIED 30/11/2009 00:00:00 30/11/2009 00:00:00





materials

ABP2-4102 TUNGSTEN INERTGAS TIG WELDING

8 ABP2-4102 TUNGSTEN INERTGAS TIG WELDING

8 Yes QUALIFIED 30/11/2009 00:00:00 30/11/2009 00:00:00


COMMON LANE WATNALL NG16 1HA United Kingdom N/A 02 SurfaceTreatments

02-01 Anodizing Tartaric sulfuricanodising of

aluminium alloys forcorrosion protection

and paintpretreatment

AIPS02-01-003 Tartaric SulphuricAnodising of

aluminium alloys forcorrosion protection

and paintpretreatment.

2 AIPI02-01-003 Tartaric SulphuricAnodizing of

aluminium alloysTSA


03/08/2018 11:25:21 PAINTED PARTSONLY

17/06/2016 11:59:35




passivation


80-T-35-1101 Chromating ofAluminum andAluminum Alloy


Yes QUALIFIED WITHLIMITATIONS

10/04/2018 16:18:26 QUALIFIED ONLYFOR USE OF

ALODINE PEN FORREWORK

25/03/2015 00:00:00




passivation


80-T-35-9124 Repair of PaintCoatings on Metallic

and Non-MetallicSurfaces

80-T-35-9124 Repair of PaintCoatings on Metallic

and Non-MetallicSurfaces

Yes QUALIFIED 26/03/2015 00:00:00 25/03/2015 00:00:00




passivation


ABP1-5057 CONVERSIONCOATING OFALUMINIUM

6 ABP1-5057 CONVERSIONCOATING OFALUMINIUM


LIMITED TOIMMERSION AND

BRUSH/SWAB,METHOD 1 AND 2

ONLY.

06/06/2018 13:53:46



16 Dec 2019 09:50

5/624




ess scope





passivation


AIPS02-05-001 Chemical conversioncoating

3 AIPI02-05-001 Chemical conversioncoating


06/06/2018 14:26:25 IMMERSIONPROCESS ONLY.

17/01/2018 12:02:16


COMMON LANE WATNALL NG16 1HA United Kingdom N/A 03 Installation,Manufacture,Fabrication

03-03 Fabrication,bearings, swaging

Rework of scratchesin Aluminium alloyson external surfaces

80-T-39-0230 Treatment ofDamage on

Components Made ofAluminium-Alloy

80-T-39-0230 Treatment ofDamage on

Components Made ofAluminium-Alloy

Yes QUALIFIED 10/04/2018 16:21:01 26/03/2015 00:00:00



03-03 Fabrication,bearings, swaging

Rework of scratchesin Aluminium alloyson external surfaces

AIPS03-03-001 Rework of scratchesin Aluminium alloyson external surfaces

5 AIPI03-03-001 Rework of scratchesin aluminium and

aluminium alloys onexternal surfaces

2 Yes QUALIFIED 16/09/2019 10:41:49 10/06/2013 00:00:00



03-06 Installation Installation of AnchorNuts

80-T-34-3000 Installation of AnchorNuts

80-T-34-3000 Installation of AnchorNuts

Yes QUALIFIED 04/04/2017 12:20:56 25/03/2015 00:00:00


COMMON LANE WATNALL NG16 1HA United Kingdom N/A 04 Heat Treatment 04-01 Heat treatmentof aluminium alloys

Heat treatment ofaluminium alloy parts

80-T-36-1010 Heat Treatment ofAluminium

80-T-36-1010 Heat Treatment ofAluminium

Yes QUALIFIED 12/04/2018 12:47:46 25/03/2015 00:00:00




ABP3-1119 HEAT TREATMENTOF ALUMINIUM

9 ABP3-1119 HEAT TREATMENTOF ALUMINIUM

9 Yes QUALIFIED 30/11/2009 00:00:00 1.00 0.01 1.00 30/11/2009 00:00:00




ABP3-1120 REFRIGERATEDSTORAGE OF

ALUMINIUM AFTERHEAT TREATMENT

1-3 ABP3-1120 REFRIGERATEDSTORAGE OF

ALUMINIUM AFTERHEAT TREATMENT

1-3 Yes QUALIFIED 14/11/2018 09:32:00 30/11/2009 00:00:00




AIPS04-01-001 Heat treatment ofaluminium alloys

parts

5 AIPI04-01-001 Heat Treatment ofAluminium Alloy

Parts

A3 Yes QUALIFIED 26/07/2018 09:46:36 10/06/2013 00:00:00



Heat treatment ofsolid rivets

ABP3-1118 HEAT TREATMENTOF RIVETS PRIOR

TO RIVETING

2 ABP3-1118 HEAT TREATMENTOF RIVETS PRIOR

TO RIVETING

2 Yes QUALIFIED 30/11/2009 00:00:00 30/11/2009 00:00:00


COMMON LANE WATNALL NG16 1HA United Kingdom N/A 05 Paints, Coatings,Filler, Sealant


ABP4-1123 APPLICATION OFCORROSION


OR EXTERNALSURFACE

25 ABP4-1123 APPLICATION OFCORROSION


OR EXTERNALSURFACE

25 Yes QUALIFIED 28/09/2012 00:00:00 28/09/2012 00:00:00





80-T-35-9120 Coating with Paintsand Varnishes,

General


General

Yes QUALIFIED 10/04/2018 16:12:25 25/03/2015 00:00:00





systems

80-T-35-5218 Application of ElasticProtective Coatings

80-T-35-5218 Application of ElasticProtective Coatings

Yes QUALIFIED 26/03/2015 00:00:00 25/03/2015 00:00:00





systems



EXTERNALSURFACE



EXTERNALSURFACE

6 Yes QUALIFIED 30/11/2009 00:00:00 30/11/2009 00:00:00





systems







18 Yes QUALIFIED 30/11/2009 00:00:00 1000.00 1200.00 300.00 30/11/2009 00:00:00





systems


PAINTS ANDVARNISHES FOR

OVERCOATING OFSEALANTS AND

PART MARKINGSAND FOR

IDENTIFICATIONPURPOSES


PAINTS ANDVARNISHES FOR

OVERCOATING OFSEALANTS AND

PART MARKINGSAND FOR

IDENTIFICATIONPURPOSES

11 Yes QUALIFIED 30/11/2009 00:00:00 30/11/2009 00:00:00





systems


systems


systems


25/10/2019 12:58:05 ABRASIONRESISTANT PAINTON NON VISIBLEDETAIL PARTS,

WHEN AIRCRAFTON THE GROUND

12/10/2018 14:41:45




APPLICATION OFHIGH

TEMPERATURESTOVE ENAMEL

PAINT TO STEELS

ABP4-2131 APPLICATION OFHIGH


PAINT TO STEELS

3 ABP4-2131 APPLICATION OFHIGH


PAINT TO STEELS

3 Yes QUALIFIED 30/11/2009 00:00:00 30/11/2009 00:00:00





80-T-35-5030 Coating withTwoThree-

component Water-based Primer


component Water-based Primer

Yes QUALIFIED 26/03/2015 00:00:00 25/03/2015 00:00:00






component Water-based Top Coat


component Water-based Top Coat

Yes QUALIFIED 26/03/2015 00:00:00 500.00 230.00 120.00 25/03/2015 00:00:00





ABP4-2130 APPLICATION OFFLEXIBLE FINISH


16 ABP4-2130 APPLICATION OFFLEXIBLE FINISH


16 Yes QUALIFIED 30/11/2009 00:00:00 30/11/2009 00:00:00





AIPS05-02-009 Application ofstructural paints

5 AIPI05-02-009 APPLICATION OFSTRUCTURAL

PAINTS

A3 Yes QUALIFIED 26/07/2018 15:19:59 10/06/2013 00:00:00




Rework of paints onmetallic and

nonmetallic structuralparts

AIPS05-02-011 Rework of paints onmetallic and non-metallic structural

parts

5 AIPI05-02-011 Rework of paints onmetallic and non-metallic structural

parts

2 Yes QUALIFIED 25/09/2018 16:29:54 10/06/2013 00:00:00





INTEGRAL FUELTANKS


INTEGRAL FUELTANKS

16 Yes QUALIFIED 02/08/2018 15:09:32 12/04/2018 15:47:57





GENERALAIRCRAFT

STRUCTURE


GENERALAIRCRAFT

STRUCTURE

16 Yes QUALIFIED 30/11/2009 00:00:00 1200.00 2500.00 800.00 30/11/2009 00:00:00




compounds

80-T-35-5903 Assembly withDuroplastic Anti-

corrosive Compound,Zink Chromate

Based

80-T-35-5903 Assembly withDuroplastic Anti-

corrosive Compound,Zink Chromate

Based

Yes QUALIFIED 26/03/2015 00:00:00 25/03/2015 00:00:00




compounds

ABP4-5144 APPLICATION OFNON-HARDENING


SEALANT

5 ABP4-5144 APPLICATION OFNON-HARDENING


SEALANT

5 Yes QUALIFIED 30/11/2009 00:00:00 30/11/2009 00:00:00




sealants

ABP6-4221 MANUFACTURE OFFORM-IN-PLACE

SEALS USINGSEALANT

4 ABP6-4221 MANUFACTURE OFFORM-IN-PLACE

SEALS USINGSEALANT

4 Yes QUALIFIED 03/08/2018 11:25:21 07/12/2015 00:00:00




80-T-34-9600 Application ofSealing Compounds

80-T-34-9600 Application ofSealing Compounds

Yes QUALIFIED 26/03/2015 00:00:00 25/03/2015 00:00:00






STRUCTURE


21/11/2018 11:15:28 No qualification forfreezing and

defreezing process.

10/06/2013 00:00:00



05-05 Sealant Surface protection offasteners andsealants by


AIPS05-05-003 Surface protection offasteners andsealants by


3 AIPI05-05-003 Surface protection offasteners andsealants by


A5 Yes QUALIFIED 21/11/2018 11:15:28 10/06/2013 00:00:00




80-T-34-5803 Wet Installation ofFasteners

80-T-34-5803 Wet Installation ofFasteners

Yes QUALIFIED 26/03/2015 00:00:00 25/03/2015 00:00:00







21/11/2018 11:15:28 No qualification forfreezing and

defreezing process.

10/06/2013 00:00:00



16 Dec 2019 09:50

6/624




ess scope



COMMON LANE WATNALL NG16 1HA United Kingdom N/A 06 Bonding 06-01 Pre-treatment Etching offluorpolymer

adherends prior toadhesive bonding

ABP5-1148 PREPARATION OFPTFE FORADHESIVEBONDING

1 ABP5-1148 PREPARATION OFPTFE FORADHESIVEBONDING

1 Yes QUALIFIED 30/11/2009 00:00:00 600.00 2700.00 750.00 30/11/2009 00:00:00


COMMON LANE WATNALL NG16 1HA United Kingdom N/A 06 Bonding 06-01 Pre-treatment Mechanical surfacepreparation of non-structural adherend






TO ADHESIVEBONDING

A2 Yes QUALIFIED 26/07/2018 09:55:40 15/09/2017 11:36:30


COMMON LANE WATNALL NG16 1HA United Kingdom N/A 06 Bonding 06-02 Manufacture Non-structuralAdhesive bonding.

80-T-34-9032 Bonding of Non-structural

Connections

80-T-34-9032 Bonding of Non-structural

Connections

Yes QUALIFIED 26/03/2015 00:00:00 25/03/2015 00:00:00







4 Yes QUALIFIED 30/11/2009 00:00:00 30/11/2009 00:00:00





A3 Yes QUALIFIED 16/09/2019 10:38:09 10/06/2013 00:00:00


COMMON LANE WATNALL NG16 1HA United Kingdom N/A 07 Electrical 07-01 Assembly Electrical bonding 80-T-40-3312 Electrical bonding 80-T-40-3312 Electrical bonding Yes QUALIFIED 26/03/2015 00:00:00 500.00 230.00 120.00 25/03/2015 00:00:00


COMMON LANE WATNALL NG16 1HA United Kingdom N/A 07 Electrical 07-01 Assembly Electrical bonding ABP7-1245 ELECTRICALBONDING ANDEARTHING FOR

AIRBUSREQUIREMENTS

DURINGASSEMBLY


AIRBUSREQUIREMENTS

DURINGASSEMBLY


17/12/2018 15:20:12 LIMITED TO PARTSAND PROCESS

REFERENCED INBVTI AFBT 001

ISSUE 3.

08/12/2015 00:00:00


COMMON LANE WATNALL NG16 1HA United Kingdom N/A 07 Electrical 07-01 Assembly Electrical bonding ABP7-1246 ELECTRICALBONDING ANDEARTHING FOR

AIRBUSREQUIREMENTS

DURINGASSEMBLY


AIRBUSREQUIREMENTS

DURINGASSEMBLY


03/08/2018 11:25:21 LIMITED TO PARTSAND PROCESS

REFERENCED INBVTI AFBT 001

ISSUE 3.

09/12/2015 00:00:00


COMMON LANE WATNALL NG16 1HA United Kingdom N/A 07 Electrical 07-01 Assembly Electrical bonding AIPS07-01-006 Electrical bonding 9 AIPI07-01-006 Electrical Bonding B1 Yes QUALIFIED WITHLIMITATIONS

21/11/2018 15:17:11 LIMITED TOMethods SP1, SP2,SP7, SP8, 2a/2b, 7,

FP2 and FP3

28/01/2014 00:00:00


COMMON LANE WATNALL NG16 1HA United Kingdom N/A Non DestructiveTesting

AITM6-0Measurement

Determination ofelectrical conductivityof non-ferromagnetic

materials

ABP6-5224 TESTING OFALUMINIUMALLOYS BY

ELECTRICALCONDUCTIVITY

5 ABP6-5224 TESTING OFALUMINIUMALLOYS BY

ELECTRICALCONDUCTIVITY

4 Yes QUALIFIED 30/11/2009 00:00:00 UK UK 895.00 1796.00 1200.00 30/11/2009 00:00:00



AITM6-0Measurement


Points


points


points


12/10/2018 15:50:57 LIMITED TOMETHOD 1 and 2

04/04/2014 00:00:00



AITM6-1 Penetrant Penetrant testing ABP6-5230 TESTING BYPENETRANT FLAW

DETECTION

12 ABP6-5230 TESTING BYPENETRANT FLAW

DETECTION


22/05/2019 10:10:57 sensitivity 2penetrant and

aluminium 2000,6000, 7000 series

(when etching step isperformed)

09/08/2017 11:51:38



AITM6-1 Penetrant Penetrant testing AITM6-1001 Penetrant Testing 12 AITM6-1001 Penetrant Testing 10 Yes QUALIFIED WITHLIMITATIONS

22/05/2019 10:12:01 sensitivity 2penetrant and

aluminium 2000,6000, 7000 series

(when etching step isperformed)

07/07/2017 11:40:42



AITM6-9 Conductivity Inspection forconfirmation of

anodising process

AITM6-9004 Inspection forconfirmation of theanodising process

based uponmeasurement of

surface resistance

2 AITM6-9004 Inspection forconfirmation of theanodising process

based uponmeasurement of

surface resistance

2 Yes QUALIFIED 22/05/2019 11:43:57 17/06/2016 12:06:05




Coating thicknessmeasurement

AITM6-6006 Measuring coatingthickness by

equipments of themagnetic and eddy

current type

3 AITM6-6006 Measuring coatingthickness by


current type

3 Yes QUALIFIED 22/05/2019 11:40:25 25/03/2015 00:00:00




Determination ofelectrical conductivityof non-ferromagnetic

materials

AITM6-6004 For InspectionProcesses

Determination ofelectrical conductivityof aluminium alloys

by Eddy currentmethod

5 AITM6-6004 For InspectionProcesses

Determination ofelectrical conductivityof aluminium alloys

by Eddy currentmethod

3 Yes QUALIFIED 12/04/2018 13:00:56 25/03/2015 00:00:00


COMMON LANE WATNALL NG16 1HA United Kingdom N/A TBD TBD DEOXIDATION OFALUMINIUM

ALLOYS

ABP8-1296 DEOXIDATION OFALUMINIUM

ALLOYS

7 ABP8-1296 DEOXIDATION OFALUMINIUM

ALLOYS

7 Yes QUALIFIED 22/05/2019 10:03:41 06/06/2018 14:09:04

134767 AERO COATINGGMBH

GEWERBEGEBIETREDENTIN

LUKASWIESE 7-8 WISMAR 23970 Germany SURFACETREATMENTSPECIALISTS

02 SurfaceTreatments

02-02 Shot Peening,surface

improvement,blasting, cold

expansion

Dry blasting 80-T-35-0200 Abrasive Blasting -Cleaning -

80-T-35-0200 Abrasive Blasting -Cleaning -

Yes QUALIFIED 14/11/2019 09:58:02 26/06/2019 23:30:46





02-04 Plating,coating, temporaryprotection, release

agents

Electrolytic cadmiumplating

80-T-35-1107 ChromiumPassivation of

Cadmium - PlatedSurfaces

80-T-35-1107 ChromiumPassivation of

Cadmium - PlatedSurfaces


14/11/2019 09:58:02 Limited To ChromiumPassivation of

Vacuum DepositedCadmium as per 80-T-35-4200. Limited

To ExtendedWorkbench Activities

(see AP2190.0 fordefinition).

05/05/2009 00:00:00





02-04 Plating,coating, temporaryprotection, release

agents

Electrolytic cadmiumplating

80-T-35-4200 Vacuum Deposistionof Cadmium

80-T-35-4200 Vacuum Deposistionof Cadmium


14/11/2019 09:58:02 LIMITED TOEXTENDED

WORKBENCHACTIVITIES (SEE

AP2190.0 FORDEFINITION)

26/01/2008 00:00:00






passivation




Yes QUALIFIED 15/11/2019 11:51:29 11/11/2019 14:29:17




05 Paints, Coatings,Filler, Sealant


80-T-35-5002 Coating with Two-component Primer

EP-based

80-T-35-5002 Coating with Two-component Primer

EP-based





1200.00 9000.00 3000.00 26/01/2008 00:00:00






80-T-35-5025 Coating with Two -component Primer

Chromate - free

80-T-35-5025 Coating with Two -component Primer

Chromate - free





26/01/2008 00:00:00








General


General

Yes QUALIFIED 14/11/2019 09:58:03 26/06/2019 23:38:48







80-T-35-5106 Coating with PUR -based Top Coat

80-T-35-5106 Coating with PUR -based Top Coat





26/01/2008 00:00:00




Non DestructiveTesting


Coating thicknessmeasurement

AITM6-6006 Measuring coatingthickness by


current type

3 AITM6-6006 Measuring coatingthickness by


current type

3 Yes QUALIFIED 14/11/2019 09:58:03 01/07/2019 14:23:15




TBD TBD Rinsing 80-T-35-0090 Rinsing 80-T-35-0090 Rinsing Yes QUALIFIED 15/11/2019 12:03:41 11/11/2019 14:32:56

134774 AEROCAPA S.L. CL GAVILAN 2 FUENLABRADA 28946 Spain N/A 01 JoiningTechniques



fasteners


fasteners

4 I+D-P-146 Application ofsealants

F3 Yes QUALIFIED 11/06/2019 14:27:34 800.00 3000.00 1500.00 01/07/2000 00:00:00



16 Dec 2019 09:50

7/624




ess scope


134774 AEROCAPA S.L. CL GAVILAN 2 FUENLABRADA 28946 Spain N/A 01 JoiningTechniques



fasteners


fasteners

4 I+D-P-231 Remachado deestructuras de

materialescompuestos de fibra

de carbono

B7 Yes QUALIFIED 09/07/2019 08:43:36 01/07/2000 00:00:00

134774 AEROCAPA S.L. CL GAVILAN 2 FUENLABRADA 28946 Spain N/A 02 SurfaceTreatments


passivation


I+D-P-202 Chemical conversionfilms on aluminium

and its alloys

B5 I+D-P-202 Chemical conversionfilms on aluminium

and its alloys

B5 Yes QUALIFIED WITHLIMITATIONS

09/07/2019 08:57:02 VALID ONLY FORTOUCH-UP ONSMALL AREASWITH HANDLE

APPLICATION BYBRUSH (SA WP).

ALODINEMIXTURES

MATERIAL BOUGHTTO QUALIFIEDPROVIDERS.

06/03/2015 00:00:00

134774 AEROCAPA S.L. CL GAVILAN 2 FUENLABRADA 28946 Spain N/A 05 Paints, Coatings,Filler, Sealant


I+D-P-064 Paint systems formetallic detail parts

and assemblies

C I+D-P-064 Paint systems formetallic detail parts

and assemblies

C Yes QUALIFIED WITHLIMITATIONS

External Report Created On 20 Aug 2019 09:20 - airbus.com · This document and all information...

Documents

Transcript of External Report Created On 20 Aug 2019 09:20 - airbus.com · This document and all information...