WARNING: Follow all recommendations from component and abrasive manufacturers for speeds and proper usage. 23

Collet Sizes: 1/8 Inch • 1/4 Inch Carbide Burrs Flap WheelsMounted Stones

320RAD Series 420RAD Series

420RADRS;13000;1/4420RADSK;13000;1/4320RADK;20000;1/4

Safety Lever

Safety Lever

Side Exhaust

Side Exhaust

Steel Case

Steel Case

Exhaust Direction Lever Style MODEL NUMBER Exhaust Direction Lever Style MODEL NUMBER

SideStandard Lever 320RAD;20000;1/4

SideStandard Lever 420RADS;13000;1/4

Safety Lever 320RADK;20000;1/4 Safety Lever 420RADSK;13000;1/4

RearStandard Lever 320RADR;20000;1/4

RearStandard Lever 420RADRS;13000;1/4

Safety Lever 320RADRK;20000;1/4 Safety Lever 420RADRSK;13000;1/4

1.2 H.P.(900 W)

35 cfm (16.5 L/s) Max

2.5 Lbs. (1.1 Kg) Aluminum2.9 Lbs. (1.3 Kg) Steel

3/8" NPT Inlet1/2" (13 mm) Hose Size

Extended Right Angle Collet Grinders

10.1 Inch(257 mm)

4.3 Inch(110 mm)

2.0 Inch(51 mm)

1.44 Inch(37 mm)

9.8 Inch(249 mm)

1.6 Inch(41 mm)

4.5 Inch(113 mm)

2.0 Inch(51 mm)

1.0 Inch(25 mm)

Abrasive Mounting320RAD Alternate Options 420RAD Alternate Options

Aluminum Case

SteelCase

Case MaterialSTANDARD EQUIPMENT• Tool • Operating Instructions and Service Manual • Wrenches (sizes based on options)

The ER Heavy Duty Collet is Standard Equipment on

320RAD & 420RAD Series.

Rear Exhaust

SideExhaust

Exhaust Direction*

*APPLIES TO BOTH TOOL SERIES

1/4" ShownOther Sizes

Available

RIGHT ANGLE GRINDERS

Aluminum Case

SteelCase

Case Material

Safety Lever

StandardLever

Lever Style*

0.7 H.P.(600 W)

25 cfm (11.8 L/s) Max

2.2 Lbs. (1.0 Kg) Aluminum2.6 Lbs. (1.2 Kg) Steel

1/4" NPT Inlet3/8" (10 mm) Hose Size

Aluminum Case

Rear Exhaust

Standard Lever