Expro Petrotech Analysis Services…data can also be used with the PVTSim software to complete a...
4
FLUIDS exprogroup.com WELL FLOW MANAGMENT ™ Expro Petrotech ® Analysis Services Info sheet: A3005 / rev_11-12 TurboPVT™ TurboPVT Transfer Detection A major advantage of the TurboPVT™ transfer service is the continuous monitoring of the fluid properties during the sample transfer process. TurboPVT Validation TurboPVT is also capable of providing near PVT-lab quality measure- ments of key parameters of the single-phase gas/fluid. These include density and viscosity at reservoir T&P and density at standard due point / bubble point. This validation data will give further critical information to the reservoir engineers on sample quality and PVT properties. TurboPVT Customised services Further fluid analysis of the WFS samples can be achieved with addi- tional equipment that, with varying degrees of complexity, can be mobi- lised into the field without the use of a full mobile lab. These customised additions allow an operator to hand pick critical data requirements, such as CO 2 and GOR in situations where a full PVT lab is not an option. This data can also be used with the PVTSim software to complete a hydro- carbon composition and a full PVT report. By measuring permittivity, density and viscosity whilst the sample is being transferred to a transport bottle, important fluid/gas properties and phase changes can be monitored in real-time. TurboPVT transfer provides an operator with immediate independent quality control of all high value WFS samples and fast track decisions can be made of further sampling and well planning.
Transcript of Expro Petrotech Analysis Services…data can also be used with the PVTSim software to complete a...
-
FLUIDS
exprogroup.com WELL FLOW MANAGMENT™
Expro Petrotech® Analysis Services
Info sheet: A3005 / rev_11-12
TurboPVT™
TurboPVT Transfer DetectionA major advantage of the TurboPVT™ transfer service is the continuous monitoring of the fluid properties during the sample transfer process.
TurboPVT ValidationTurboPVT is also capable of providing near PVT-lab quality measure-
ments of key parameters of the single-phase gas/fluid. These include
density and viscosity at reservoir T&P and density at standard due point
/ bubble point. This validation data will give further critical information to
the reservoir engineers on sample quality and PVT properties.
TurboPVT Customised servicesFurther fluid analysis of the WFS samples can be achieved with addi-
tional equipment that, with varying degrees of complexity, can be mobi-
lised into the field without the use of a full mobile lab. These customised
additions allow an operator to hand pick critical data requirements, such
as CO2 and GOR in situations where a full PVT lab is not an option. This
data can also be used with the PVTSim software to complete a hydro-
carbon composition and a full PVT report.
By measuring permittivity, density and viscosity whilst the sample is being transferred to a transport bottle, important fluid/gas properties and
phase changes can be monitored in real-time. TurboPVT transfer provides an operator with immediate independent quality control of all high value
WFS samples and fast track decisions can be made of further sampling and well planning.
-
FLUIDS
Sample at Surface
Take openingpressure
Heat transfer detector toRes T / 80C
Micro GC Gasanalysis
C6+, CO2 , N2 ,
Condition Sample
TurboPVT Service
Flash sample at /above res pressure
for GOR / CGR
Transfer toshipping bottle
Set TurboPVT to resT & P
Possible multi pointset of data at different
pressure and temp
Finnish transferand secure
shipping bottle
CustomisedTurboPVT services
Liquid density atSTD from flush
sample
EOS tuning
Constant volumedepletion plots for
density andpressure
contaminationanalysis
Transfer and PVTReport data
Transfer detection
Validation
Customised
Compositional analysis andcontamination analysis
GOR / CGR & Bo/Bg factor
Defined fluid reservoir properties withdensity and viscosity at res T & P. Liquid
density at STD. BP/ DP
Report data giving sample fluid typeswith permitivity, density, viscosity,
pressure, temperature, volume plots foreach and every sample.
Opening pressure - Noninvasive quality control
Reference depth /expected pressure /
sample content
exprogroup.com WELL FLOW MANAGMENT™
Info sheet: A3005 / rev_11-12
Benefits
Quality check of WFT/BHS samples during transfer.
No need for time consuming analysis offshore; i.e.
all measurements are done during sample transfer.
A full transfer report containing graphs showing all sensor data,
is automatically generated after the transfers have been finished.
The unit fits into one transport box, and is therefor easy to
mobilise to any field location.
HPHT (15 Kpsi/175 °C)
Technical Specifications
Temperature max: 175 °C
Pressure max: 1000 barg
Measured parameters:
Density: 0.001 - 2.0 g/cc
(+/- 0.001 g/cc)
Viscosity: 0.02-3000 cP (+/- 5%)
Permittivity: 1-20 (+/- 1%)
Pressure: 1000 barg (0.1%)
Temperature: 175 °C (+/- 0.5 °C)
Transferred volume: 1000 cc (+/- 0.1 cc)
Dead volume: 3 cc
-
“When we search for answers, we have to know what we’re looking for”
-
FLUIDS
Expro PetrotechKvalamarka 26 N-5514 HaugesundNorway
Tel: +47 52 700 700 Fax: +47 52 700 710
Analytical Data Services UKUnit 11+12 Brickfield Trading Estate, Brickfield Lane, Chandlers FordEastleigh, HampshireUKSO53 4DR
Phone: +44 2380 275333Fax: +44 2380 275321
Fluid Sampling & Analysis – UKFluid Analysis Centre2/4 Cremyll RoadReading, BerkshireUKRG1 8NQ
Phone: +44 1189 515 800Fax: +44 1189 597 399
Fluid Sampling & Analysis – AustraliaExpro Group Australia Pty LtdLevel 31060 Hay Street, West PerthWA 6005Australia
Phone: + 61 892 135 555Fax: +61 892 135 599
Fluid Sampling & Analysis – Malaysiaa.s. Petrotech Knowledge (Malaysia) Sdn. BhdLevel 2 & 3, Wisma Volkswagen7 Lorong Maarof,59100 Bangsar, Kuala LumpurMalaysia
Phone: +603 228 20 973Fax: +603 228 21 098
Fluid Sampling & Analysis – BrazilRua R6,10, Novo Cavaleiros,Macae-RJ, Rio de JaneiroCEP: 27933-390Brazil
Phone: +55 22 2106 4200
For further information, please contact us at [email protected]
