EXCELLENT WEB OFFSET PRINTING PRESSES, BINDING ......PACKING LINES, PRE-PRESS EQUIPMENT AND FACTORY...

sw.co.uk

Misrepresentation: Whilst every effort has been made to provide reliable information, Sanderson Weatherall LLP do not warrant the information contained herein and prospective purchasers must satisfy themselves by inspection as to its correctness.

On the instructions of S M Law Esq. and N Millar Esq. of Baker Tilly Restructuring and Recovery LLP, the Joint Administrators of Woodford Litho Ltd Piecemeal (subject to General Conditions and Special Conditions unless previously sold)

EXCELLENT WEB OFFSET PRINTING PRESSES, BINDING, STITCHING & PACKING LINES, PRE-PRESS EQUIPMENT AND FACTORY & OFFICE FURNISHINGS & EQUIPMENT

PRIVATE TREATY (Available immediately)

• KBA Compacta 618 48pp Four Unit Double Capacity Web Offset Printing Press, c/w Folding & Cutting, 620mm cut-off (2003) c/w Muller Martini Avanti Folder, Stacker and Palletiser Unit and Gammerler Trimming Line

• Kolbus KM411.B 25 Station Perfect Binder (2005) c/w 12 Kolbus Log Feeders, Kolbus 15 Station Gatherer Kolbus Direction Changer, Kolbus/ Ambaflex Spiral Drying Elevator & Lowerator and Kolbus Folder and Trimmer

Photographs & online auction bidding via sw.co.uk/auctions

Bidding: Closes from 11am Wednesday 23 September 2015

View: From 10am to 4pm Tuesday 22 September 2015 or by appointment

At: Freebournes Road, Witham, Essex, CM8 3UH, UK

The Chancery, 58 Spring Gardens, Manchester, M2 1EW Tel: 0161 259 7000, Fax: 0161 259 7007 [email protected] sw.co.uk/auctions

http://sw.co.uk/machinery-business-assets/current-auctions

mailto:[email protected]?subject=Woodford%20Litho%20Online%20Auction


GENERAL CONDITIONS OF SALE 1. Interpretation 1.1. In these General Conditions the following words and expressions

shall have the meanings set opposite: “Auction” any auction (whether a Live Auction or an

Online Auction and whether conducted independently or simultaneously) conducted pursuant to these General Conditions and the Special Conditions;

“Auctioneer” the person conducting the Auction or to whom the conduct of the Auction is delegated under General Condition 4.9 below;

“Bidder” any person who offers to purchase any Lot whether by bidding at Auction or offering to purchase by private treaty or tender;

“Bid” an offer to purchase any Lot whether by bidding at Auction or offering to purchase by private treaty or tender, and “Bids” and “Bidding” shall be construed accordingly;

“Buyer” any person who agrees to purchase any Lot whether at Auction or by private treaty or tender and as determined under General condition 4.12 below;

"Buyer's Premium" a commission payable by the Buyer on the completion of a Sale the amount of which is set out in the Special Conditions; The Auctioneer, when acting as Agent for the Seller, may also receive commission from the Seller.

“Catalogue” the catalogue incorporating these General Conditions and the Special Conditions;

"Clearance Date and Time" the date and time on which all Lots must be removed by the Buyer from the Location as specified in the Special Conditions;

“The Company” Sanderson Weatherall LLP (company number OC 344 770) whose registered office is at 25 Wellington Street Leeds LS1 4WG;

"Deposit" the sum payable by the Buyer to the Company as set out in the Special Conditions;

"Live Auction" any auction conducted at the Location or at such other location(s) as shall be notified by the Company in the Special Conditions or in the Catalogue;

“Location” the premises at which the Lots are located, details of which are set out in the Special Conditions;

“Lot” any Lot described in the Catalogue, on the Website or on the Company’s invoice;

"Online Auction" any auction conducted over the internet via the Website pursuant to these General Conditions and the Special Conditions;

"Sale" the sale of any Lot by Auction, private treaty or tender and as determined under General Condition 4.11 below;

“Seller” the person upon whose instructions the Company is conducting the Sale, details of whom are set out in the Special Conditions;

“Special Conditions” any additions to these General Conditions set out or referred to in the Catalogue, announced at Auction or otherwise specified by the Company;

"Website" the website at: www.bidspotter.co.uk; "VAT" value added tax chargeable under English Law

for the time being and any similar additional tax.

2. Application of these General Conditions 2.1. These General Conditions apply to every Sale of plant and

machinery, chattels and trade stocks conducted by the Company. 2.2. These General Conditions, the Special Conditions and any terms set

out in the Catalogue shall together comprise the "Conditions of Sale".

2.3. To the extent that these General Conditions are inconsistent with any Special Conditions, the General Conditions shall prevail.

2.4. Bidding for any Lot shall be deemed to be an acceptance by the Bidder of these General Conditions and the Special Conditions.

2.5. These General Conditions shall be governed construed and enforced in accordance with the laws of England and Wales unless the Location is in:- 2.5.1 Scotland in which case the laws of Scotland shall apply; or 2.5.2 Northern Ireland in which case the laws of Northern Ireland

shall apply. 2.6. A reference to writing or written shall include e-mail. 2.7. Any word or phrase having a meaning defined in these General

Conditions shall have the same meaning when used in the Special Conditions.

3. Identity of the Parties 3.1. The Company offers each Lot as agent of the Seller and not as

principal unless otherwise indicated in the Catalogue. 3.2. The identity of the Seller is set out in the Special Conditions. 3.3. Unless the Company has previously acknowledged in writing that the

Bidder Bids as agent on behalf of a named principal, every Bidder shall be taken to Bid on his own behalf as principal.

3.4. Any Bidder acting as agent on behalf of a named principal shall remain liable to the Seller and the Company for all obligations and

liabilities of his principal jointly and severally with the principal. The Bidder warrants that he has the authority of his principal to make each Bid made.

3.5. Every Bidder is required to give his name and address and provide satisfactory proof of identity and such other information and documentation as is required to the Company before making any Bid and in the case of: 3.5.1. a Live Auction by the completion of a registration form; 3.5.2 an Online Auction by online registration at the Website; and 3.5.3 a private treaty or tender by prior registration or notification of

details, as and when requested by the Company. 3.6 The Company reserves the right at any time to reject the registration

of any persons and refuse access to the Auction at its sole discretion.

3.7 On registration for an Online Auction Bidders will be added to the Company's mailing list for the purposes of notification of future sales by email. If a Bidder wishes to stop receiving such notifications they can unsubscribe at any time by clicking on the link provided at the bottom of each email.

3.8 On registration in accordance with General condition 3.5 the Bidder acknowledges that only adults aged 18 years and over are entitled to enter into a legally binding contract and as a result they are the only people entitled to register for the Auction. By registering the Bidder warrants that he is aged 18 years or older and is capable of forming a legally binding contract.

4 Conduct of Auctions 4.1 Any Lot may be subject to a minimum bid or reserve price. The

Seller is entitled to change these at any time before the conclusion of the Sale.

4.2 The Seller, Auctioneer or any representative, agent or person acting on behalf of the Seller may Bid for any Lot. Persons entitled to Bid pursuant to this condition 4.2 shall be entitled to place Bids on any Lot up to the reserve price including by placing Bids in response to other Bidders.

4.3 Lot descriptions will be amended as appropriate as and when information becomes available to the Company. Prospective Bidders must read Lot descriptions before making a Bid so that they are fully aware of any amendments to the description appearing in the Special Conditions and/or on the Website or in the Catalogue in relation to a particular Lot.

4.4 The Auctioneer may at any time before the conclusion of the Sale withdraw or divide any Lot or combine any Lots.

4.5 The Company may sell any Lot by private treaty or tender before or after the Auction. The Auctioneer may reject any Bid at his sole discretion and without being required to give a reason.

4.6 No Bid shall be retracted without the consent of the Auctioneer. 4.7 The Auctioneer may where there is a dispute between Bidders,

summarily determine the dispute or immediately again offer the Lot for sale, in each case without being required to give a reason.

4.8 The Auctioneer shall in every other respect decide how the Auction is to be conducted and without being required to give a reason.

4.9 The Auctioneer may in his sole discretion delegate to a person whom he believes to be competent the conduct of the Auction in accordance with these General Conditions.

4.10 The Auctioneer may from time to time act jointly with an associated Auctioneer who will be named in the Catalogue and/or in the Special Conditions.

4.11 A Sale is concluded (constituting acceptance of the Bidder's offer, subject to General Condition 4.12 below) when: 4.11.1 in the case of a Live Auction, on the fall of the Auctioneer's

hammer; and/or, 4.11.2 in the case of an Online Auction, at the close of the timed

Online Auction Sale as specified on the Website and as defined by General Condition 4.17.3 below or;

4.11.3 in the case of a private treaty or tender, when the Bidders Bid is accepted by the Company, such acceptance to be communicated to the Bidder in writing by way of receipt of the Company’s invoice.

4.12 The Buyer shall be the person who made the highest Bid before the conclusion of the Sale pursuant to General Condition 4.11 above subject to approval and acceptance by the Company, the Auctioneers and the Seller or such other Bidder as the Auctioneer and/ or the Company may declare to be the Buyer without being required to give a reason. The Auctioneer and/ or the Company and/ or the Seller is not bound to accept the highest Bid or any other Bid placed in the course of the Auction.

4.13 In the case of an Online Auction the Buyer, as determined under General Condition 4.12 above, shall within a reasonable time after the conclusion of the Sale receive by email an invoice in respect of the monies due for the Lot(s) purchased.

4.14 In the event that the reserve price is not met, the Company may consider the Bids received below the reserve price with the Seller who at its sole discretion may accept, reject or place a counteroffer.

4.15 On conclusion of the Sale and acceptance of the Bidders Bid pursuant to General Conditions 4.11 and 4.12 above, the Buyer acknowledges and agrees that he has entered into a contract with the Seller to buy the Lot and the Buyer must complete the transaction to purchase the Lot.

4.16 The Buyer may not remove any Lot he has bought until after the end of the Auction.

4.17 In relation to an Online Auction: 4.17.1 the Company cannot guarantee that the internet services

will operate continuously or without interruptions and this

http://www.bidspotter.co.uk/en-gb/auction-catalogues?ClientId=ea4937c3-667e-4577-aa4e-a1b901646b20

could affect the conduct of the Online Auction and the Bidders ability to Bid online. The Company shall not be liable in any respect in the event of any dispute due to errors, omissions or disruptions to internet services or power failures or any other unforeseen circumstances which may occur during the Online Auction;

4.17.2 the Auctioneer may at any time, without notice, postpone or cancel an Online Auction or extend an Online Auction beyond the published closing time (including extension of the timed Online Auction in accordance with General Condition 4.17.3 below);

4.17.3 the timed Online Auction Sale is auto bid extension enabled meaning that where a Bid is placed within ten minutes of the original scheduled close of the timed Online Auction the scheduled close of the timed Online Auction will automatically be extended by an additional ten minutes. This continues with a new scheduled close time each time a Bid is placed until no-one places a Bid before the last scheduled close of the timed Online Auction. Every time a Bid is placed within ten minutes or less left in the Online Auction an additional ten minutes Bidding time is added until there are no more Bids. Such time shall then be deemed to be the close of the timed Online Auction.

4.18 In the event that the Auctioneer unknowingly sells a Lot that was not eligible for Sale (i.e. there is a third party interest that comes to light) then the Auctioneer shall be entitled to immediately rescind that Sale without any further liability to the Auctioneer and/or Company or the Seller.

4.19 Copies of the Auctions (Bidding Agreements) Act 1927 and 1969 are held at the Company’s and/or the Auctioneer’s principal place of business.

5 Sale and Payment 5.1 The Buyer shall pay the following sums to the Company in full and

without set off:- 5.1.1 immediately upon the Sale of any Lot the Deposit, if requested

by the Company; and 5.1.2 the balance of the price of the Lot purchased, together with the

Buyer’s Premium by no later than 48 hours after conclusion of the Sale or, in the case of an Online Auction, after receipt of an invoice in respect of the purchased Lot(s) pursuant to General Condition 4.13 above, or such other time and date as may be specified in the Special Conditions; and

5.1.3 any other payment or amount due to the Seller and/or the Company pursuant to these General Conditions or the Special Conditions on demand.

5.2 In every case time for payment shall be of the essence. 5.3 In view of Money Laundering Regulations the Company reserves the

right to refuse payment in cash. Payments in cash of more than £7,500 will not, in any circumstances, be accepted.

5.4 If the Buyer fails to make any payment on the due date for payment then, without limiting any other right or remedy available to the Seller, the Buyer shall pay to the Company interest (both before and after any judgment) on the amount unpaid at the rate of 1.5% above the bank base rate of Barclays Bank Plc per month or any part thereof until payment in full is made.

5.5 Until the Buyer has fully complied with its obligations in this General Condition 5:-

5.5.1 title to any Lot bought shall not pass to the Buyer; 5.5.2 the Seller shall have a lien over any Lot bought by the Buyer in

the Auction; 5.5.3 if the Buyer effects or purports to effect a resale or any other

disposition of all or part of the Lot, the Buyer shall hold the proceeds of resale or other disposition on trust for the Seller.

5.6 All sums payable under these General Conditions and the Special Conditions are exclusive of any applicable VAT for which the Buyer shall be additionally liable to pay to the Company. On written request by the Buyer the Company will provide a VAT invoice.

5.7 The Company will only accept payment under this General Condition 5 from the Buyer or its authorised agents.

6 Removal of Lots 6.1 Risk of damage to or loss of the Lot shall pass to the Buyer

immediately upon the conclusion of the Sale. 6.2 The removal of Lots from the Location shall be undertaken by the

Buyer entirely at its own risk and without any liability whatsoever to the Company.

6.3 Buyers are responsible for any and all costs and expenses incurred in relation to the removal of Lots and any other applicable charges, taxes and insurance costs.

6.4 The Buyer may not remove any Lot until the Buyer has:- 6.4.1 paid by cleared funds all amounts payable pursuant to

General Condition 5 above in full; and 6.4.2 if requested by the Company produced satisfactory evidence

to the Company that the Buyer has adequate public liability insurance in respect of the indemnity set out in General Condition 6.11 below and/or deposited with the Company, by way of security for the costs of making good any damage likely to occur, such sum as the Company may stipulate.

6.5 The Company will only permit the removal of Lots purchased by the Buyer or its authorised agents.

6.6 The Buyer must remove each Lot purchased by the Clearance Date and Time for which time shall be of the essence. Lots may only be removed during normal working hours or such hours as are specified in the Special Conditions. No clearance on Bank or Public Holidays.

6.7 Buyers should co-operate regarding order of removal of Lots in order to comply with the Clearance Date and Time. If it transpires that a Buyer makes no effort to commence dismantling and the particular Lot is preventing other buyers from removing purchased Lots, then the Auctioneer reserves the right to insist that removal take place immediately notwithstanding the specified Clearance Date and Time. In the event the Buyer does not comply with its obligations under this General Condition 6.7, then the Auctioneer reserves the right to arrange for the removal and/or storage of the Lot and charge any attendant costs to the Buyer.

6.8 If any Lot is unsold and has to be dismantled & lowered to allow the removal of any other lot, then such dismantling & lowering shall be the responsibility of the Buyer of the relevant Lot(s).

6.9 Title to computer software sold pursuant to the Sale of a Lot is not transferred under any Sale to the Buyer and use is subject to any licence or copyright restrictions and user conditions. The Sellers, Company and/or Auctioneers reserve the right to erase any private or sensitive information prior to the Sale or at any later date.

6.10 The Buyer and/or his removal contractor must liaise with the Company's site representative prior to commencing dismantling/removal of a Lot from the Location and must at all times comply with its obligations under clause 6.11 below.

6.11 When removing any Lot from the Location the Buyer shall, or shall procure that its removal contractors shall: 6.11.1 carry out a full assessment of Lot, the Location and the land

or buildings to which the Lot is fixed to assess the risks associated with detaching/removing the Lot and shall fully satisfy themselves that they can detach/remove the Lot in compliance with the Buyers obligations under this General Condition 6.11 prior to handling and/or commencing removal of a Lot;

6.11.2 obtain all relevant planning permissions (where required) in relation to the removal of building structures and plant housings;

6.11.3 buyers of Lots will be required to make good holes or voids exposed by the removal of Lots. Cladding taken off buildings for removal of plant & equipment will have to be replaced, unless otherwise specified by the Company;

6.11.4 when detaching any Lot fixed to land or buildings, do so safely and lawfully and must not use flame cutters, explosives or any other dangerous equipment or process without first obtaining written consent of the Company;

6.11.5 remove the Lot in compliance with all relevant legislation, regulations, codes of practice, guidance, orders, rules and other requirements of any relevant government or governmental agency or authority whether Parliamentary, statutory, parochial or local including (without limitation) in compliance with the Health and Safety at Work etc Act 1974, the Environmental Protection Act 1990, The Construction (Design and Management) Regulations 2015, Control of Substances Hazardous to Health Regulations 2002 (COSHH), and the Road Vehicle (Construction and Use) Regulations 1986 and any subsequent amendments thereof and all other health and safety and environmental legislation in existence at the time of the Sale. To the extent that such regulations are advisory rather than mandatory, the standard of compliance to be achieved by the Buyer shall be to the best industry practice;

In all cases arising under this General Condition 6.11 the costs of compliance shall be borne by the Buyer and the Buyer hereby indemnifies the Company and the Seller against all losses, costs, expenses, damages, liabilities, demands, claims, actions and proceedings which the Company and/or the Seller may incur arising directly or indirectly out of any breach by the Buyer to the provisions of this General Condition 6.11 and the Buyer shall make good any damage caused to (without limitation) other lots, the Location or to any property belonging to third parties, in removing any Lot under this General Condition 6.11.

6.12 The Company shall be entitled to halt the clearance of any Lot if in its absolute discretion the removal of a Lot is being carried out in an unsatisfactory manner. Where the clearance is halted by the Company, the Buyer must liaise with the Company's site representative as to how the Lot should be removed from the Location provided that the Buyer shall at all times ensure that it complies with its obligations under General Condition 6.11 above and the Company shall have no liability in this regard.

6.13 The Buyer shall provide evidence as and when requested by the Company of the Buyer's insurance policies in respect of the following insurances and at a minimum level of: 6.13.1. Public Liability Cover - limit Two Million Pounds (£

2,000,000); and 6.13.2. Employers Liability Cover - limit Ten Million Pounds

(£10,000,000); the Company reserves the right to vary the level of insurance cover stated above at any time, as and when required.

6.14 The Buyer shall provide to the Company a Risk Assessment & Method Statement complying with The Construction (Design & Management) Regulations 2015, COSHH or with any subsequent amendments thereof or such other legislation as shall from time to time be in force.

6.15 Electric, gas, water, steam and waste disconnections are the responsibility of the Buyer and MUST be carried out by an approved contractor following consultation with the site representative.

6.16 It is expressly brought to the Buyer’s attention that certain Lots could contain asbestos, noxious chemicals/ substances etc. which if not handled correctly during their removal could result in breach of Health & Safety at Work legislation and/or Control of Substances Hazardous to Health Regulations or other statutory requirements.

6.17 Any fluids, gases and/ or waste remaining in plant and machinery are the responsibility of the Buyer and MUST be removed from the Location strictly in accordance with any applicable statutory requirements.

6.18 The Buyer must use safe and lawful means of removing the Lot, must comply with all current statutory requirements and regulations including those relating to the disposal and removal of waste, and if required, satisfy the Company in relation to their removal procedures; in particular, the removal of waste materials must be undertaken by an approved and licensed contractor to an approved waste management site.

6.19 It is the purchaser’s or their removal contractors responsibility (i.e. Police, Ministry of Transport, Local Authority) to transport off site long/ wide loads, within sufficient time prior to the commencement of clearance period as stated in the Special Notes & Conditions.

6.20 The Buyer shall indemnify the Company and the Seller against any loss, damages, expenses, claims or liabilities arising directly or indirectly from the possession or use of the Lot after title to the Lot has passed to the Buyer but before it is removed from the Location.

6.21 All Lots are sold on the understanding that the Seller does not represent them as being in a condition which makes them suitable for domestic use. If any Lots are intended for domestic use the Buyer must ensure that they comply with the requirements of the Furniture & Furnishings (Fire) (Safety) Regulations 1988 and any subsequent amendments thereof or such other relevant statutory requirements or regulations as shall from time to time be in force.

6.22 The Buyer undertakes to comply with the provisions of the Data Protection Act 1998 in processing data held by them in connection with any Lot.

7 Default by the Buyer 7.1 If at any time the Buyer has failed to pay the sums specified in

General Condition 5 above in full by the due date for payment, or to remove any Lot purchased by the Clearance Date and Time specified in the Special Conditions the Seller may rescind the Sale of that Lot, in which case any Deposit shall be forfeit, and that Lot may be resold.

7.2 If the Seller has rescinded the Sale but the Buyer has removed the Lot purchased, the Seller shall be entitled without previous notice to enter upon any premises where he believes the Lot to be and remove it.

7.3 If the Seller has rescinded the Sale and the Lot has been resold by the Auctioneer and/or the Company or by the Seller, the Buyer shall reimburse the Seller with any shortfall where:- 7.3.1 the resale price less the Sale price; and 7.3.2 the costs incurred by the Seller incidental to the resale.

7.4 If the Buyer fails to remove any Lot by the Clearance Date and Time specified:- 7.4.1 the Seller may remove the Lot from the Location and leave it

outside at the Buyer’s risk in all respects; 7.4.2 the Seller may charge the Buyer for the reasonable costs of

storage; 7.4.3 the Seller may charge the Buyer rent, taxes, men's wages and

expenses incurred as a result of the Lot(s) remaining at the Location; and

7.4.4 the Buyer shall indemnify the Seller against any loss, damages, expenses, claims or liabilities incurred by the Seller arising from the Buyer’s failure to remove the Lot from the Location.

8 Acknowledgements and Exclusion of Warranties 8.1 The Buyer acknowledges that in agreeing to purchase any Lot he is

not relying on any warranties or representations made by the Seller or the Company or any of their employee’s agents or representatives. All representations, warranties and conditions, express or implied, statutory or otherwise in respect of all and any of the Lots are expressly excluded and without limitation any warranties and conditions as to title, quiet possession, satisfactory quality, fitness for purpose and description are excluded to the fullest extent as permitted by law.

8.2 The Buyer further acknowledges that neither the Sellers nor the Company shall in any circumstances be liable to or to compensate the Buyer nor shall the Buyer be entitled to rescind the Sale or reject any Lot for an error omission or misstatement contained in the Catalogue and/or in the Special Conditions.

8.3 The Buyer also acknowledges that:- 8.3.1 all the Lots are purchased on the basis that risk of good title to

all or any of them passing to the Buyer is at the Buyer’s risk and without limitation the Lots are sold subject to any claims, liens, distraint and execution and subject to all leasing, hire or hire purchase agreements and reservation of title claims (if any) in respect of them;

8.3.2 if it shall be found that the Seller does not have title to all or any of the Lots the Buyer shall have no right to rescind, avoid or vary this agreement or to claim damages or a reduction in the price paid or payable;

8.3.3 anything found in, under, near or in any Lot which is not specifically included in the description of the Lot remains the property of the Seller;

8.3.4 any intellectual property rights or software subsisting in a Lot may be third party property and as such the Seller and/or the Company may be unable to effect transfer. The Buyer will not be authorised to use intellectual property rights or software and any such use or transfer shall be at the Buyers sole risk.

8.4 The Buyer undertakes that it shall ensure that any vehicle comprised in any Lot is in a roadworthy condition in accordance with the Road Vehicle (Construction and Use) Regulations 1986 and any subsequent amendments thereof or such other relevant regulations as shall from time to time be in force before using it on a public road. It is the Buyer’s responsibility to remove Company logos and lettering from vehicles. Odometer readings are not warranted.

8.5 The Buyer acknowledges that any item of plant, machinery or equipment contained in the Lot(s) may not necessarily comply with any statutory requirements or regulations governing the use of that plant, machinery or equipment in their working environment. Neither the Seller nor the Company shall incur any liability to the Buyer because of any default or defect in all or any of the Lots. Buyers are entirely responsible for ensuring that the use of any item of plant, machinery or equipment does not contravene any health and safety and environmental legislation in existence at the time of the Sale.

8.6 The Buyer acknowledges and agrees that the Company is acting only as agent of the Seller and it is expressly agreed and declared that no personal liability in connection with the Sale of any Lot or otherwise shall fall on the Company and the Buyer shall indemnify the Company against all and any liabilities arising under or in connection with the Sale of any Lot. Insolvency Practitioner(s), including Administrative Receiver(s), Administrator(s) and Liquidator(s) act as agent(s) for the Seller without personal liability and shall incur no personal liability whatsoever in relation to a Sale or pursuant to any document relating thereto.

8.7 The Buyer agrees that the General Conditions and the exclusions which they contain are fair and reasonable bearing in mind that:- 8.7.1 the Buyer must rely absolutely on the Buyer’s own opinion

and/or professional advice concerning the quality, state, condition, performance and functionality of the Lots any right, title or interest which is sold under the terms of these General Conditions, their fitness and suitability for any particular or any purpose, the possibility that some or all of them may have defects not apparent on inspection and examination including, without limitation, the presence of contamination and the possibility that the Buyer may not acquire title and the fact that the Buyer would have no remedy under this Agreement should that happen;

8.7.2 the Buyer has available to it skilled professional advice and on that basis agrees to purchase a Lot for a consideration calculated to take into account amongst other things the risk to it represented by the fact that the parties believe that all the exclusions and limitations set out in these General Conditions would be recognised as being fully effective by the Courts and the Seller making it clear that it would not have agreed to sell any Lot on any other basis except for a higher consideration;

8.7.3 the Buyer has been given every opportunity which might reasonably be expected to examine and inspect the Lots.

8.8 Notwithstanding anything else in these General Conditions, the Seller’s and the Company’s total liability under or in connection with the Sale of any Lot, whether in respect of breach of contract, tort (including negligence), breach of statutory duty or otherwise, including consequential loss, shall be limited in aggregate to the price paid for the Lot or if no price has been paid then the higher of the market value or reserve price for the Lot. This General Condition 8.8 does not apply to liability for death or personal injury.

8.9 The Buyer acknowledges that a Sale by Auction is not a consumer sale for the purposes of the Sale of Goods Act 1979 (as amended by the Sale and Supply of Goods Act 1994) and the Unfair Contract Terms Act 1977 and the Buyer shall not seek to rely upon and conditions or warranties implied thereby or by any other legislation.

SPECIAL CONDITIONS OF SALE

Seller: On the instructions of S M Law Esq. & N Millar Esq. of Baker Tilly Restructuring and Recovery LLP, the Joint Administrators of Woodford Litho Ltd

Location:

Freebournes Road, Witham, Essex, CM8 3UH, UK Directions: Proceed along A120 and pass Braintree Retail Park on the left hand side. At the roundabout take the fourth exit signposted Witham B1018. Proceed to next roundabout and take second exit signposted Witham B1018 and follow road for approximately five miles. Pass Witham Town signs and continue to follow road to roundabout and take second exit signposted Colchester, Maldon and Chelmsford. Carry straight on at next roundabout and pass Gulf Petrol Station on right hand side. At the next roundabout take third exit, see Morrisons superstore on left hand side, signposted Maldon B1018 and Town Centre. Take first exit at next roundabout and pass the railway public house on the left hand side then take first exit at next mini roundabout along The Avenue. Carry straight on through traffic lights and at next roundabout (Marsh Roundabout) take second exit along Pasture Road. At next roundabout (see Tesco superstore on right hand side) take first exit signposted Pasture Road (note width restriction along this road – 6ft 6in) and the premises are on the left hand side. Viewing: From 10am to 4pm Tuesday 22 September 2015 or by appointment with the Agents. Access to the Location is allowed on the understanding that all persons attend the Location entirely at their own risk and are responsible for and will indemnify the Seller and the Company against any losses damage or claims occasioned by their presence at the Location. Visitors under the age of 18 will not be allowed access to the Location. (Please note there is adult material stored on site.) Registration: All bidders must register their details with the Company and provide identification where required. In the case of Live Auctions by way of the registration form provided at the Live Auction or in the Catalogue and in the case of Online Auctions, online at the Website www.bidspotter.co.uk and www.sw.co.uk/auctions. Bidding: The General Conditions and the Special Conditions apply to all Sales by way of Auction, private treaty and tender and in the case of any Bids placed by way of an Online Auction stress that all Bidders must read and understand Bidspotter’s terms and conditions of registration at www.bidspotter.co.uk and www.sw.co.uk/auctions. At the close of the timed Online Auction Sale final Bid figures will be submitted to the Seller for its approval and any Bid shall be subject to approval and acceptance by the Company and/or the Seller. No Bid may be withdrawn and the Company/Seller does not bind himself to accept the highest Bid or any other Bid placed in the course of the Online Auction Sale. Buyer's Premium: Buyers will pay a Buyer's premium of 15% (plus VAT) of the purchase price for each Lot purchased by Auction. The Buyer's Premium is payable by the Buyer to the Company in accordance with the General Conditions and, for the avoidance of doubt is payable in addition to the purchase price for the Lot. The Buyer's Premium is not negotiable and is payable by all Buyers. Deposit: Buyers shall pay a deposit of 25% (plus VAT) of the purchase price for each Lot purchased as requested by the Company pursuant to the General Conditions and these Special Conditions. Payment: All Lots shall be paid for in full within 48 hours (two working days) of the invoice date and shall be at the Buyer's risk immediately upon the conclusion of the sale. Telegraphic Transfer - Bank details for telegraphic transfer: Account: Sanderson Weatherall LLP Bank: Allied Irish Bank (UK) plc, Vantage Point, Hardman Street, Spinningfields, Manchester Sort Code: 23-83-96 Account Number: 03526066 SWIFTCODE – AIBKGB2L IBANGB28AIBK23839603526066 Cash - In view of Money Laundering Regulations the Company reserves the right to refuse payment in cash. Payments in cash of more than £7,500 will not, in any circumstances, be accepted.

http://www.bidspotter.co.uk/


http://www.bidspotter.co.uk/


Bankers Draft/ Cheques: (made payable to Sanderson Weatherall LLP) will only be accepted on the basis that any Lots are not removed until cleared funds are in the Company's client account. Debit Cards: The Company accepts debit cards for payment of invoices (maximum £2,500). The Company does not accept credit cards for payment of invoices. All sums payable under the General Conditions and these Special Conditions are exclusive of any applicable VAT for which the Buyer shall be additionally liable to pay to the Company.

Clearance: All lots must be cleared without fail by 12 noon FRIDAY 27 NOVEMBER 2015, such date and time being the Clearance Date and Time as referred to in the General Conditions, REMOVAL OF ALL LOTS WILL BE STRICTLY BY APPOINTMENT, please see the Company's invoice for contact details. The final date for removal of smaller items is no later than FRIDAY 9 OCTOBER 2015. NB: Purchasers and their Contractors please refer to the General Conditions of Sale regarding removal of fixed plant items, in particular Section 6. If Purchasers require the services of a machinery removal contractor, please contact the auctioneers, who will endeavour to put them in touch with a suitable company. Collection from site is the Buyer’s responsibility, the Company/Seller do not provide a packing/ delivery service. Reserve Removal: Lots sold subject to a reserve removal will either be indicated in the Catalogue with the date of availability or will be identified by the Auctioneer at the point of Sale. A Deposit will be payable as with other lots but in this instance payment in full can be left until five (5) working days prior to availability. Unless specified to the contrary such Lots must be removed from the Location not later than the Clearance Date and Time specified for final removal in these Special Conditions. Fire Alarm: In case of a fire alarm all visitors and contractors are to exit buildings and report to the Muster Point. Smoking: No smoking on site. Food and Drink is only to be consumed in designated areas. Safety: All persons including Buyers, their employees, agents, representatives and contractors are reminded that they are responsible for their own safety on site and enter at their own risk and should take the precaution of wearing protective clothing as appropriate. Finance: If Buyers wish to purchase Lots with the help of a finance company they should make arrangements well in advance of the Sale to ensure that they are able to make payment in accordance with the General Conditions. Overseas Buyers: Overseas Buyers should ensure that the country to which the items are destined:- • holds no import restrictions on the goods to be purchased; • has no import licence restrictions or a restriction on currency allocation; • has no prolonged inspection procedure which might cause excess delay or refusal in allowing your goods to be

imported. Overseas Buyers will receive a fully descriptive invoice in order that they may arrange payment as soon as possible with the Company's bank, Allied Irish Bank (UK) Plc, Vantage Point, Hardman Street, Spinningfields, Manchester. Overseas Buyers should employ a suitable freight forwarding organisation. Please note that many of the machinery removal companies in the United Kingdom are not necessarily freight forwarders. The Company will be pleased to advise accordingly. The Company makes no representation and accepts no liability whatsoever to any Buyer in respect of the issuance or validity of any exportation or importation permits or the existence and exercise of exportation or importation regulations or any compulsory purchasing regimes. VAT Payments and Returns: All overseas Buyers (EU and non EU) will be charged VAT at the current rate on each Lot purchased. This will be refunded to the overseas Buyer as soon as the Seller receives a copy of the bill of lading as proof of export, providing this documentation is received within 3 months of the sale date. The Seller is unable to refund the VAT on the Buyer’s Premium to non EU countries.

V.060715

Lot Description ROCKWELL BAKER PERKINS G14

FOUR COLOUR PRINTING PRESS

1 Megtec DLP DOUBLE SIDED REEL STAND, serial no. 0346DE (1998), web width 1030mm, with infloor reel case, web guides and tension rolls and 1m x 1.25m loadcell weigh platform (pits in floor to be filled and screeded following removal of equipment)

2 FIVE Rockwell Baker Perkins G14 16PP WEB OFFSET PRINTING PRESS UNITS, (one not in use) with Technotrans damper panel and power control panels (no mains incoming cable included)

3 Megtec PHAZER II 9.8-1066 GAS FIRED DRYER, serial no. 0017-PZ (1998), paper width 980mm, with power control panel and exhaust ducting (hole in roof to be made good)

4 Rockwell Baker Perkins FOUR ROLL CHILL UNIT, serial no. 771/178, contract no. mp9015, with power control panel, Quadtech register unit and Quadtech silicone coater

5 Rockwell Baker Perkins C2 FOLDER CUTTER, serial no. 794021, with web direction changer and Planatrol Optimate Softjet unit

6 BVC Blower, with heat exchanger

7 Centrifugal Fan

8 Six Centrifugal Chilled Water Pumps and Control Valves and Panel

9 Powrmatic PGUH 240F/1 Suspended Gas Fired Space Heater, serial no. G240GF 150, 70.3kW heat output (hole in roof to be made good by purchaser)

10 Printing Line Acoustic Enclosure

11 Printing Line Control Desks, with plc’s as fitted

12 LOG STACKER AND PALLETISER LINE, comprising inclined belt conveyor, radius belt conveyor, Muller Martini 0366-000.24 inclined four band conveyor, serial no. MMZO 419 332-20 (2001), automatic gate, Muller Martini Avanti horizontal log stacker, serial no. MMZO 383 228 MMEZ 390 854, Muller Martini/ Strapex bander, serial no. 01469 (2000), and Muller Martini palletiser, serial no. MMZO 383 229 MMEZ 390 983 fitted Sick photo electric beam guard

12A Two Mobile Plate Racks

13 Lots 1-12A offered for sale as a one lot contract

Lot Description ROCKWELL BAKER PERKINS G14

FOUR COLOUR PRINTING PRESS

14 Megtec DLP Double Sided Reel Stand, serial no. 0325DE (1998), web width 1020mm, with 1m x 1.25m loadcell weigh platform, in floor reel cart and Butler Automatic tension roll unit (pits in floor to be filled and screeded following removal of equipment)

15 FOUR ROCKWELL BAKER PERKINS G14 16PP WEB OFFSET PRINTING PRESS UNITS, with Technotrans damper panel and power control panels (no mains incoming cable included)

16 Vits OT GAS FIRED DRYER, serial no. 292, with power control panel and exhaust ducting (holes in roof and walls to be made good)

17 Baker Perkins FOUR ROLL CHILL UNIT, with Ryco web guide unit and Quadtech web register unit

17A Scheffer Pre-folder Unit

17B Varnish Unit and Knight UV Dryer 18 Baker Perkins C2 FOLDER, serial no. 793

065, contract no. MP84 22

19 Web Roller Feed Frame, with Baker Perkins direction changer, serial no. 713/019, contract no. MP84022, Baker Perkins F2 4X4PP Folder, serial no. 712/019, Acumeter feed unit and discharge rolls

19A Scheffer Scoring Unit 20 Blower Pump, with heat exchange unit

21 Chilled Water Pressurisation Pump, with tank and expansion vessel

22 Chilled Water Pump

23 Printing Line Acoustic Enclosure

24 Printing Line Control Desks, with plc’s as fitted

25 Two Stobb P1 Stackers, serial no. 49678 4966, with Civiemme triple band conveyoring

26 Civiemme Two-tier Multi-band Conveyor

27 Direction Change Conveyor

28 Civiemme Multi-band Conveyor, approx. 3.2m long


30 Multi-band Inclined Conveyor, 1.13m long

31 Civiemme STACKER, serial no. 354 (1985), with Civiemme Megamatic PALLETISER, serial no. 356

32 Civiemme Inclined Multi-band Conveyor, approx. 1.3m centres long

33 90° Powered Roller Conveyor

Lot Description 34 Direction Change Conveyor

35 90° Powered Roller Conveyor



38 Multi-band Conveyor, approx. 1.1m long

39 Civiemme Stacker, serial no. 353 (1985), with Civiemme Megamatic palletiser, serial no. 355

40 Palletiser Control Roller Feed Link

41 Vits QRO SHEETER, serial no. 259E1, refurbished 2008

41A Two Mobile Plate Racks

42 Lots 14-41A offered for sale as a one lot contract

43 Baker Perkins G14 Print Unit, machine no. 711 229, contract no. MP 85027 (understood to require attention)

44 Welded Steel Bulk Ink Tank (yellow), approx. 1.4m dia. x 1m deep, with IBC stand and residual ink contents of tank

44A Hoerbiger pneumatic pump and Technotrans TCP89/12 control unit

45 Welded Steel Bulk Ink Tank (red), approx. 1.4m dia. x 1m deep, with IBC stand and residual ink contents of tank


46 Welded Steel Bulk Ink Tank (blue), approx. 1.4m dia. x 1m deep, with IBC stand and residual ink contents of tank


47 Welded Steel Bulk Ink Tank (black), approx. 1.4m dia. x 1m deep, with IBC stand and residual ink contents of tank


48 Bolted Steel Tank Access Gantry, with ink silo level control panel, angle steel edge bunding and welded steel barriers

49 Lots 44-48 offered for sale as a one lot contract

50 The Steel Ink Delivery Piping, to three press lines, with electric trace heating and control panel

51 Airedale DELTACHILL SIX-FAN WATER CHILLING UNIT

52 Approx. 11 Centrifugal Pumps, throughout two floors of pump housing

53 Water Heater Tank (on top of tower)

54 Water Storage Tank, 3m x 1.5m x 1.5m deep

Lot Description 55 Megtec EPSILON SO17M03 THERMAL

OXIDISER, serial no. 115890 (2002), with Pollrich VR50 S10CI UK0900 LG 270 MMUU centrifugal fan, serial no. 122092 (2002), 100kW, with ducting to print hall (holes in wall/ roof to be made good by purchaser), control panel (in housing), distribution panel in press hall (not including mains incoming cable), and chimney stack (dismantled outside of warehouse/ bindery)

56 57

58 59 60

PRE PRESS ROOM 61 Agfa XCALIBER VLF-XT CTP IMAGE

SETTER, serial no. 20K 8000 5004/564 (2003), with computers, Agfa THS-SMA processor, Merlin M33 water cooler, Agfa Elantrix 150S VL000S developer, serial no. AA31022C (2005), Agfa plate stacker and stand, with vacuum pump (in Main Print Hall)

62 Five Drums x 20 litre Agfa THD200 Developer, for energy elite plates

63 Plastic Spill Trays (reserve removal till contents cleared)

64 Berth OPB-360-C618 PLATE REGISTER PUNCH/ BINDER, serial no. 02-360-03-30 (2003), with computers

65 PLATE REGISTER PUNCH AND PRESS 66 Procol 192 Plate Register Punch 67 Epson Stylus Pro 11880 Wide Colour

Printer, serial no. JWP 000 1705

68 Epson Stylus Pro 11880 Wide Colour Printer, serial no. JWP 000 1652

69 Epson Stylus Pro 9800 Wide Colour Printer, serial no. GLS 000 1702

70 Seven Colormagic 1067mm x 45m Uncoated Matt Paper, 90gsm, code: CM90UC 106745

71

72 Three image2output 190gsm Semi Matt Proofing Paper, 1270mm x 30m, out no. 1205 1901 27030

73 Steel Double Door Cupboard, Three Drawer Pedestal and Corner Desk Unit

74 10 x Epson Printer Cartridges and Maintenance Tank

75 13 x Epson Printer Cartridges and Black Ink Conversion Kit

76 Avery 1370N Precision Cutter

77 i 217.71 Light Unit/ Trimmer, serial no. 88863

Lot Description 78 Approx. 33 x Purtrex PX-75-0 7/8 75

Micron Filters, with one part reel dampening roller covering and image remover pens, as set out

79 Viptronic Vipcam 118 Reader

80 Three Steel-framed Benches

81 Plastic Spill Tray

82 Acoustic Screen and Two Swivel Chairs

83 Developer Waste Pump

84 Water Feed Plastic Tank, with stand and two pumps (in storeroom)

85 Protocol Plate Bending Machine

86 Protocol Plate Bending Machine (known to require attention)

87 Verivide Colour Inspection Cabinet

88 Muller Martini STITCHING LINE comprising: - Demag overhead travelling crane, with two Demag chain hoists, rolled steel supports, Muller Martini 277.0401 log clamp, six Muller Martini 3636 log feeders, serial no. 99.09281.02, seven Muller Martini 345.0400 feeders and gatherers, serial no. 99 23508.50, five x serial no 99 09281.50, 1 x type 279.401, serial no. 990281 C102, Hans Muller 300 stitcher, serial no. 99 02981 C181, direction changer and conveyor, Hans Muller three knife trimmer, serial no. 99 02981.0180, conveyor, direction changer, Muller Martini 227.8400 three station inserter, serial no. 99 09281.01, direction changer, Graphen/ Muller Martini 310 9081 stacker, serial no. 99 09281 C173, twin belt conveyor, radius conveyor, twin belt conveyor, multi-band lift section conveyor, line changer, Kolbus/ Rima XRS130/ RS-33135 stacker, serial no. 153/337 860-10 (2005), three x twin belt delivery conveyors, Muller Martini 6214 film wrapper, serial no. 74664-2 (2002), K J Fabriken FK41 S105 shrink wrap tunnel, serial no. 13972-2, cooler fan, delivery conveyor, Transpak TP701NS strapper, serial no. 60902646 (2006) and roller discharge conveyor

Lot Description 89 Muller Martini STITCHING LINE

comprising: - Demag 80kg overhead travelling crane, with two Demag chain hoists, rolled steel supports, Muller Martini 277 log clamp, seven Muller Martini 3636 log feeders, serial no. 94.00772 (one known to require attention), seven Muller Martini 343.0400 feeders and gatherers, serial no. 91.00444.50, one Muller Martini 316.0400 feeder and gatherer, serial no. 91.00444, Muller Martini 301/0401 stitcher, serial no. 91.00444, direction changer, Muller Martini 0304.0400 three knife trimmer and conveyor, serial no. 91.00444, Muller Martini stacker, serial no. 91.00444.02, Transpack TP704NS strapper, serial no. 60902647, roller discharge conveyor, Muller Martini FJ44-200 film wrapper, serial no. 21467-2, with feed and delivery conveyor, Muller Martini FK41-200 shrink wrap tunnel, serial no. 21165-3 (1993) and Mosca RO-TRP-4 strapper, serial no. 69038 (2002)

90 Soco T-10 Case Taping Machine, serial no. 637-2004, with feed and discharge conveyors

91 Best Pack MSD 22-2 Case Taping Machine, serial no. 081227 (2008)

92 Guardian StraPack RQ8 Strapper, serial no. 82975-06

93 Transpack TP-701 Strapper, serial no. 7054855 (2007)

94 Strapex Allpack TP-202G5 Strapper, serial no. 90842615 (2000)

95-110

BINDERY WAREHOUSE 111 Sitma C80-750 POLYBAGGING LINE

comprising: - belt feed conveyor, Sitma 525 feeder, serial no. 1090, series 29, Sitma 526 four station feeder, serial no. 1281, series 21 (1995), Sitma 750/1 bagger, serial no. 1239, series 34 and delivery conveyor

112 Rima RS-30125 13in. STACKER, serial no. 302845-10 (1993), with discharge conveyor

113 Roller Ball Table

114 OMG AUTOFARD 600.0 FILM WRAPPER AND SHRINK WRAP TUNNEL, serial no. 713 (1997)

115 Schneider/ Samuel 960HS STRAPPER, serial no. 3401 (2001)

116 Schneider/ Pakseal M-30 STRAPPER, serial no. 2199 (1999)

117 Signode LB-MAGAZINE STRAPPER, serial no. PT4079

118 Mosca RO-M-P2 STRAPPER, serial no. 53368 (1999)

119 Best Pack MSD22-2 Case Taping Machine, serial no. 081229 (2008)

Lot Description 120 Transpack N-AD Directional Changer

Band Conveyor Unit, serial no. 8096842 (2008)

121 Transpak N-TT Roller Conveyor Press, serial no. 60902 648

122 Ferag RA-11-VP Cover Feeder, serial no. 27.08.0202/300197 (2002)

123 500kg cap. Platform Lift, 1.2m x 740mm

124 Kolbus Glue Application Unit

125 Roller Feed Table, 315mm wide on rollers x 1.2m long

126 Roller Feed Table, 400mm wide on rollers x 1.5m long

127 Wohlenberg 115 GUILLOTINE, serial no. 3088 027, with Computacut and spare blades to rear

128 Gammerler FF710 POWERED ROLLER CORNER CONVEYOR, serial no. 111813

129 Kolbus XTN 641 Powered Belt Corner Conveyor, serial no. 144 (2005)

130 131

132 133 134

135 REAR YARD WASTE PAPER AND DUST

EXTRACTION SYSTEM 136 Impact N98/55 CENTRIFUGAL FAN, serial

no. 029916 (2008), with 75kW electric motor, control panel and ducting (to factory wall and air knife – hole in wall to be made good by purchaser)

137 Impact AIR KNIFE AND ROTARY SEAL, with two way diverter, chutes to two compactors, access platform and hooped steel access ladder

138 BOLTED STEEL DUST COLLECTION UNIT, approx. 2250mm x 1950mm x ______ dia., with Impact air seal, serial no. 025, ducting (to air knife and vent ducting - hole in wall to be made good by purchaser)

139 Por Ecomec Bricc STANDARD RAS BRIQUETTER, serial no. 4783 (2010), indicated hours 750 (at time of listing)

140 The Mainly Spiral Wound Galvanised Steel Ducting to binding lines in both units, with centrifugal fan

141 Parts for Folder (KBA Line)

142 Spares on Pallet (understood to be suitable for Baker Perkins G14)

143 Megtec Fan Impellor

144 Megtec Fan Impellor

Lot Description 145 Spares on Pallet (understood to be suitable

for Baker Perkins G14)

146 Spares on Pallet (understood to be suitable for Baker Perkins G14)

147 Assorted Spares, on pallet

148 Megtec Equipment and Spares, on pallet

149 Hydrair Pneumatic Ink Pump, with pump on pallet

150 Four Rollers, suitable for KBA48PP, comprising: - metering 160mm wero aqua C253-60 roller recovery damp form 225mm werodahl C253-01 roller recovery, inker 160mm werograph C302-01 and metering 160mm wero aqua C253-60 roller recovery, all strap banded on pallet

151 Roller, KBA 48PP, Damp Form, 225mm, Werodahl C253-01, roller recovery, with mobile steel rack

152 Three Rollers, KBA 48PP, each Inker 180mm Werograph C302-01 roller recovery

153 Three Rollers, each KBA 48PP 165mm Werograph C302-01 roller recovery

154 Four Rollers, each KBA 48PP, Inker 160mm Werograph C302-01 roller recovery

155 One Roller, KBA 48PP Metering 160mm Werograph C253-60 roller recovery

156 One Roller, KBA 48PP Ink Form 145mm Werograph C302-01 roller recovery

157 Four Rollers (KBA), with four tier double sided mobile roller rack

158 Wash Up Trays (KBA), with mobile rack

159 Plate Cylinder (understood to be suitable for G14) (known to be damaged), in wood crate

160 Anilox Roller (understood to be suitable for G14 coater), in timber crate

161 Chrome Damping Roller, in timber crate (understood to be suitable for KBA line)

162 Inking Roller (understood to be suitable for KBA line)

163 Approx. 36 BFS Blanket Cleaning Rolls, KBA 618, 1460mm x 84mm x 16.5m, internal core 32.5mm card 70g

164 Approx. 14 Web Wet Roll KBA618 Wash Cloth Rolls, 1480mm x 16.5m, core 32.5mm, OD 84mm +- 1mm

165 Card Circular Cutting Unit

166 Three Mobile Plate Racks

167 Electronic Control Equipment, on pallet

168 Mainly Electronic Control Equipment, in timber box pallet (box pallet marked Avanti Parts)

169 Two F6 Bag Filters, 492 x 592 x 610/ 6P/ 20H, with equipment on pallet

Lot Description 170 Assorted Light Fittings and Electrical

Equipment, on two pallets and floor

171 Quadtech Control Equipment, on pallet

172 Pall Brass Cased Filter Unit

173 Mobile Printer Stand, with two printers

174 Multi-Band Conveyor

175 Blankets, as set out

176 Muller Martini and Diamond Cut Knives and Equipment (in one box)

177 Muller Martini, Schonenberger and Diamond Cut Knives and Equipment, in one box

178 Schonenberger and Diamond Cut Knives and Equipment, in one box

179 Muller Martini and Schonenberger Knives and Equipment, in one box

180 Schonenberger and Fasslo Knives and Equipment, in one box

181 Muller Martini, Schonenberger and Diamond Cut Knives and Equipment, in one box


183 Schonenberger and Fasslo Knives and Equipment, in one box

184 Schonenberger and Diamond Cut Knives and Equipment, in one box


186 Knives, in box marked Muller Martini DS304 Tempo

187 Knives, in box marked MUL304 Head Set

188 Knives, in box marked Muller Martini DS304 Tempo

189 Leg End Boards, on pallet, approx. 385mm x 318mm




193 Leg End Boards, on pallet, assorted sizes




197 Muller Martini/ Grapha O310 9801 Stacker, serial no. 990 4026 8835 (understood to require attention)

198 Megtec DLP Reel Stand, serial no. 03260E (understood to require attention)

Lot Description 199 Baker Perkins Four Roll Chill Unit, contract

MP 85027, machine no. 771-042 (known to require attention)

200

201

202 Approx. 17 Rollers, on rack (understood to be suitable for Baker Perkins G14 Press), with wall mounted rack



205 Approx. Six Rollers, on rack (understood to be suitable for Baker Perkins G14 Press), with wall mounted rack

206 Eight Rollers, on pallet (understood to be suitable for Baker Perkins G14 Press)

207 Nine Rollers, on pallet (understood to be suitable for Baker Perkins G14 Press)

208 Radius Belt Conveyor, 400mm wide on belt

209 Belt Conveyor, 420mm wide on belt x 1.3m centres long

210 Inclined Belt Conveyor, 400mm wide on belt x 1.4m centres long

211 Assorted Rolls and Equipment, with mobile A-Frame rack

212 17 Assorted Rollers (understood to be suitable for Baker Perkins G14 Printing Press), with mobile four-tier rack


214 Seven Assorted Rollers (understood to be suitable for Baker Perkins G14 Printing Press), with mobile four-tier rack


216 Ink Key Control Panel, with spare control equipment parts

217

218

219

220

221

222

223

224

225

Lot Description BINDERY/ WAREHOUSE

226 Ultrasonic Cleaning Baths and Transformers, on pallet

227 Electric Control Equipment, on pallet

228 Pipe Fittings, in timber crate

229 Electric Control Equipment, in timber crate, including ink keys, Megtec control, inverters and constant voltage transformer

230 Neolab M33 Chiller Unit

231 Pump and Tank

232 Chill Roll Drive and Equipment (understood to be suitable for Baker Perkins G14)

233 Assorted Equipment, on pallet

234 Chill Roll Speed Control Equipment, in timber crate (understood to be suitable for Baker Perkins G14)

235 Chill Roll Speed Control Equipment, in timber crate (understood to be suitable for Baker Perkins G14)

236 Assorted Equipment and Folder Spares (understood to be suitable for Baker Perkins G14)

237 Top Hamper Gearbox Fu Variable Drive, in timber crate

238 Equipment, in timber crate, including roller conveyor, lifting eyes and rollers

239 BVC AB08 Blower Unit, serial no. 49 8190, with 7.5kW electric motor

240 Webtechnics Main Drive Control Panel

241 Assorted Pumps, on pallet

242

243 Rock Salt, on pallet, approx. 40 bags

244 Blanket Cylinder (understood to be suitable for Baker Perkins G14)

245 Assorted Rollers, on pallet

246 Delta New Nylair 71-4P-1000T Fan, code 11049060

247 QTI Control Panel

248 Assorted Cable, with plastic crate

249 Approx. 21 Bags Spill Absorbent Granules

250 Gas Booster Fan

251 Stafa TKV 1262-016 Centrifugal Fan, serial no. 128.778, 36m³/s

252 Blanket Cylinder (understood to be suitable for Baker Perkins G14 Press) (understood to be repaired), in timber crate

253 Erhard & Leimen Unit

254 Plate Cylinder (understood to be suitable for Baker Perkins G14 Press)

255 Trimmer Casting (understood to be suitable for Muller 300 line)

Lot Description 256 Becker VTLF250 Vacuum Pump, serial no.

A1940406, year of manufacture 2004

257 Panels, as set out

258 Cylinder (understood to be suitable for Baker Perkins G14), in timber crate

259 Folder Spares, in timber crate

260 Two Angle Gearboxes, on pallet

261 Waste Bin Wheels, in box

262 Plate Cylinder (understood to be suitable for Baker Perkins G14 Press)

263 Scheffer Fold Plough

264 Hydrovane 218 PUA508-41355 200 Air Compressor, serial no. 218-0001 169309

265 Roller (understood to be suitable for KBA press), in timber crate

266 Chill Roll Gears and Equipment

267 Unit Gears and Equipment, in timber crate

268 Ink Keys, on pallet

269

270 Multi Band Feed Unit

271 Blanket Cylinder (understood to be suitable for KBA press)

272 Top (Blue) Cylinder (understood to be suitable for G14 B Press)

273 Cable, as set out

274 Robatech Gluing Equipment, on pallet

275 Drive Unit

276 Technotrans Pump Unit Control Panel (known to require attention)

276A 17 Rollers, each 1400mm wide overall

277 Control Panel

278 Control Equipment, on pallet

279 Assorted Equipment, in two timber crates

280 Assorted Machine Spares, on pallet

281 Fork Lift Truck Cab Components, on pallet

282 GIS Electro Hoist and Transformers, on pallet

283 Pipe Fittings, on pallet

284 Crossfield Cut Off Equipment, on pallet

285 Electric Hoists and Equipment, on pallet

286 Chill Roll Gearbox and Equipment, on pallet

287 Control Equipment, in timber crate

288 Drive Shafts (understood to be suitable for G16 Press)

289 Rollers (understood to be suitable for Baker Perkins G14 Press), in timber crate

290 Rapido Boiler, with casting panels and insulation

Lot Description 291 Two Technotrans Tanks and Stands


293 Assorted Equipment, with timber crate

294 Heat Exchange Unit


296 Pneumatic Equipment, with timber crate

297 BVC Blower, serial no. A80809922, with 11kW electric motor

298 Hydro 20-22-0 Swarf Conveyor, serial no. 58575

299 Assorted Equipment, with two timber crates

300 Plate Cylinder (understood to be suitable to Baker Perkins G14 Press)



303 Harland Simon Frame 250m Electric Motor (understood to be suitable for Baker Perkins G14/ 16 Press)


305 Muller 277 Log Clamp, serial no. 99.10807/ C204

306 Assorted Cable, as set out, with two bay rack

307 Assorted Cable, as set out, with single bay rack

308 Assorted Cable and Flexible Conduit, on top self of rack

309 Electric Motors and Gearboxes, on one shelf of rack

310 Two Centrifugal Pumps, each with electric motor drive

311 Electric Motors and Equipment, set out on part bottom shelf of rack and floor

312 F L & Co Type 20 Three Tier Boltless Steel Pallet Rack, with approx. 2100mm high uprights, 2300mm wide beams and timber shelves

313 Electric Motors and Equipment, on pallet

314 Electric Motors and Equipment, on pallet

315 Electric Cable, with plastic box crate

316 Electric Cable, on pallet

317 Assorted Electric Motors, on pallet

318 Air Knife Rotor (known to be damaged)

319 Rietschle Blower, with 7.5kW electric motor

320 Polythene Bags and Ecospill Medium, on pallet

321 Assorted Spares, on pallet

322 Becker SV 733/01/101 Blower, serial no. 2319519

Lot Description 323 Centrifugal Oil Pump

324 Assorted Lifting Equipment, with timber crate

325 Insulation, on pallet

326

327 Approx. 25 Bags x 25kg Hydrosoft Granulator Water Softening Salt

328 Baker Perkins Chill Roll

329 Kolbus HD Front Knife

330 Kolbus HD Side TCT Knife

331 Kolbus HD Side Knife

332 Kolbus KD Side TCT Knife

333 Muller Tempo Foredge Set

334 Kolbus HD Front TCT Knife

335 Kolbus HD Front TCT Knife

336 Kolbus Schonenberger Knife

336A Rotary Cutter, marked 12in. dia. multi-cutter TCT Regrind (understood to be suitable for Kolbus)

336B Kolbus Reference 12475396 Rotary Cutter, marked 12in. dia. multi-cutter 30 new TCT

336C Kolbus HD Equaliser Milling Head

336D Kolbus Reference No. 00418092 Milling Head, marked 48 new TC notcher

336E Rotary Cutter (understood to be suitable for Kolbus)

337 Setting Up Plate

338 Angle Gear Unit

339 Drive Unit and Main CPU (understood to be suitable for Avanti stacker) (some items may require attention)

340 AMK Module Drive Control Unit, HVE Drive Power Pack and Three Drive Units (understood to be suitable for KBA) (some items may require attention)

341 Quantity of RGS Spares, including camera and server (hard disk removed) (understood to be suitable for Quadtech) (some items may require attention)

342 Control Desk Screen, Two Reel Stand Drive Units, Two Drives, Allen Bradley PLC Power Supply and Four Electrical Drives (understood to be suitable for Baker Perkins G14) (some items may require attention)

343 Main Drive Unit, UPS Quadtech, Reel Stand Drive Unit, Folder Drive and Drive Unit (understood to be suitable for KBA – understood to require attention) (some items may require attention)

344 Two Sensor Drive Units (understood to be suitable for Kolbus) (some items may require attention)

Lot Description 345 Two Servo Motors and Drive Supply

(understood to be suitable for KBA) (some items may require attention)

346 Rexroth Indramat Motor Drive Unit (understood to be suitable for KBA) (some items may require attention)

347 HT Probe (understood to be suitable for KBA dryer) (some items may require attention)

348 Quantity of Mercury Lamps, as set out

349 Quantity of Tape, as set out in three boxes

349A Quantity of Steel Shim, as set out in three boxes

MOTOR VEHICLES, FORK LIFT TRUCKS AND AIR COMPRESSORS

350 BMW 120d MSport 2.0 Diesel Three Door Hatchback, registration no. YK58 NWL, date first registered 08/09/08, test to 12/09/16, odometer reading 084253 miles (at time of listing), six speed manual, 1995cc, with part leather upholstery and black exterior

351 Volkswagen Passat CC 2.0L Diesel Four Door Saloon Coupe, registration no. YG58 WXD, date first registered 26/09/08, odometer reading 132,634 miles (at time of listing), six speed manual, 1968cc, with leather upholstery and silver exterior

352 Volkswagen Golf TDI 105 Match 1.9 Diesel Five Door Hatchback, registration no. EA56 XBW, date first registered 31/10/06, test to 31/10/15, odometer reading 203,144 miles (at time of listing), five speed manual, 1896cc, with black exterior

353 Ford Fiesta Ghia 1.4 Petrol Five Door Hatchback, registration no. RV05 OSO, date first registered 12/07/05, odometer reading ______ miles (at time of listing), five speed manual, 1388cc, with silver exterior

354 Toyota Corolla Executive Automatic ______ Petrol Five Door Hatchback, registration no. K420 HJN, date first registered 11/05/93, odometer reading 021,117 miles (at time of listing), 1587cc, with silver exterior

355 Hyster S 4.50XL 4500kg cap at 500mm centres design/ 2500kg at 1150mm dia. reel GAS LIFT TRUCK c/w Reel Clamp, serial no. D004V104158, year of manufacture 1995, 6219 hours (at time of listing), with twin mast, 3070mm closed mast height, max lift height 4750mm and solid tyres (reserve removal until end of clearance period)

Lot Description 356 Nissan UJ02A25U 2000kg cap at 500mm

centres design/ 1500kg at 900mm dia. reel GAS LIFT TRUCK c/w Reel Clamp, chassis no. E791844, 07819 hours (at time of listing), with triple mast, 2030mm closed mast height, max lift height 4750mm and solid tyres

357 Clark CO25L 2300kg cap at 500mm centres design/ 1150kg at 600mm dia. reel GAS LIFT TRUCK c/w SS20111 Reel Clamp, serial no. CO230L-1435-8284-CNF, 00917 hours (at time of listing), with triple mast, 2100mm closed mast height, max lift height 4800mm and solid tyres

358 Linde H25T-01 2500kg cap GAS FORK LIFT TRUCK, serial no. H2X392C00988, year of manufacture 2012, with twin mast, 2030mm closed mast height, sideshift and solid tyres (reserve removal until end of clearance period)

359 Nissan PJ01R15U Gas Fork Lift Truck, 08330 hours (at time of listing), with twin mast, 2030mm closed mast height, max lift height 3300mm, solid tyres and sideshift (reserve removal until end of clearance period)

360 Nissan UJ02A25U 2300kg cap at 500mm centres Gas Fork Lift Truck, chassis no. E791514, 08787 hours (at time of listing), with triple mast, 2030mm closed mast height, max lift height 4750mm, sideshift and solid tyres

361 Linde H45T 4500kg cap GAS LIFT TRUCK, serial no. H2X394S01786, year of manufacture 2005, ______ hours (at time of listing), with twin mast, 2440mm closed mast height, max lift height 5300mm and solid tyres (no forks)

362 Nissan UJ02A25U 2000kg cap at 500mm design/ 1500kg at 900mm dia. reel Gas Lift Truck c/w ATIB Fork Rotator, chassis no. E791834, 10,360 hours (at time of listing), with triple mast, 2030mm closed mast height, max lift height 4750mm and solid tyres

362A Pair of Fork Lift Truck Forks, approx. 1200mm

362B Pair of Fork Lift Truck Forks, approx. 1100mm

362C Pair of Fork Lift Truck Fork Extensions, approx. 1830mm long

362D Steel Fabricated Fork Lifting Beam Attachment, approx. 2700mm long

362E Chequer Plate Lifting Plate, approx. 2030mm x 2300mm

Lot Description 363 BT Reflex AC RR B2/15 1600kg cap at

600mm centres Battery Electric Fork Lift Reach Truck, serial no. 369276AA/ 2000, 4414 hours (at time of listing), with twin mast, 3480mm closed mast height, max lift height 8500mm, sideshift and Chloride Motive Power 21 Super 48V75A Battery Charger, serial no. RB0714448 (reserve removal until end of clearance period)

364 Still EXU-16 1600kg cap Battery Electric Pallet Truck, serial no. W40153604988, year of manufacture 2010, 1059 hours (at time of listing)

365 Still EXU16AC 1600kg cap Battery Electric Pallet Truck, serial no. 710150308462, year of manufacture 2009, ______ hours (at time of listing)

366 Still EXU16AC 1600kg cap Battery Electric Pallet Truck, serial no. 710150308463, year of manufacture 2009, 1761 hours (at time of listing)

367 Lansing Linde T18 1800kg cap Battery Electric Pallet Truck, serial no. 360E08307518, 1764 hours (at time of listing), with Chloride Motive Power 21 Super 24V30 battery charger, serial no. UB235354

368 Lansing Linde T18 1800kg cap Battery Electric Pallet Truck, serial no. 360E08307618, 5263 hours (at time of listing), with Chloride Motive Power Classic Plus 24V30 battery charger, serial no. MB0850971 (reserve removal until end of clearance period)

369 Crown PTH50-20-39 2300kg cap Hand Hydraulic Pallet Truck, serial no. 3-588003, year of manufacture 2006 (reserve removal until end of clearance period)

370 Liftmaster LT23 2300kg cap Hand Hydraulic Pallet Truck, serial no. 00259 (reserve removal until end of clearance period)

370A Jungheinrich 2000kg Hand Hydraulic Pallet Truck

371 BFS 5000kg cap at 750mm centres Fork Lift Truck Lifting Jib Attachment, serial no. 19279, year of manufacture 2002, 1860mm jib length (reserve removal until end of clearance period)

372 Skyjack SJ-4626 850lbs cap/ 26ft Platform Height Scissor Lift Access Platform, serial no. 71902, year of manufacture 1994, 2200mm/ 3000mm x 1150mm platform (reserve removal until end of clearance period)

373 BT HLE 1000 12V 1000kg cap Battery Electric High Level Pallet Truck

Lot Description 374 Alup Kompressoren ALLEGRO 5510SCD

TECHNOLOGY PACKAGE AIR COMPRESSOR SET, serial no. CAI394490, year of manufacture 2009, 9.5 bar working/ 9.5 bar max pressure (piping and valves excluded)

375 Alup Kompressoren LARGO 22-8 PACKAGE AIR COMPRESSOR SET, serial no. CAI394487, year of manufacture 2009, 8 bar working/ 8 bar max pressure (piping and valves excluded)

376 Alup Kompressoren ALLEGRO 38 SCD TECHNOLOGY PACKAGE AIR COMPRESSOR SET, serial no. F0505160, year of manufacture 2005, 5-13 max pressure bar, 38kW motor power (piping and valves excluded)

377 Hydrovane 218 Package Air Compressor Set, indicated 36338.82 hours (at time of listing), with galvanised steel stack (piping and valves excluded)

378 Hydrovane 218 Package Air Compressor Set, indicated 44396.00 hours (at time of listing), with galvanised steel stack (piping and valves excluded)

379 Domnick Hunter Cirrus CGE0735 Refrigerant Air Dryer, serial no. 2013550001, year of manufacture 2000, with two inline filters (piping and valves excluded)

380 Polair Hi Ross DXB150 S.S Desiccant Air Dryer, serial no. D62709 0001, max pressure 16 bar, with one inline filer (piping and valves excluded)

381 Domnick Hunter SE2030 Oil/ Water Separator, with tank

382 Ultra Filter Ultrasep Plus Oil/ Water Separator, with plastic tank

383 Sicc 1000/ 12784 1000 litre Galvanised Steel Vertical Welded Galvanised Steel Air Receiver, year of manufacture 2012 (piping and valves excluded)

384 A J Metal Products Vertical Welded Steel Air Receiver, part no. 1200, ref. no. 12110, year of manufacture 1994 (piping and valves excluded)

385 Stuart Plant Silent Power L17.5 17.5 kVA/ 14kW Diesel Engined Generator Set, serial no. EAAL007451, year of manufacture 1999, indicated 86 hours, with Lister Petter four cylinder diesel engine, Leroy Somer AC generator

Lot Description YARD

386 75kVA SINGLE AXLE TRAILER MOUNTED GENERATOR SET, with Dorman 6LDII six cylinder diesel engine, ECC BRF 315 generator, 415V, 3 phase, 50C/S, 104A, 60kW, 75kVA

387 300kg RSJ Lifting Beam, 4.8m long

388 Approx. 35 Boxes of Rock Salt, on pallet

389 Fork Lift Truck Rail End, with sideshift carriage

390 Galvanised Steel Ducting

391 RSJ’s and Handrail, as set out

392 40ft Steel Cargo Container, with bunded floor liner

393 Granite Machine Base, with steel frame

394 Stainless Steel Lined Tank and Duct

395 Stainless Steel Cased Heat Exchange Unit

396 Four Timber Crates

397 Galvanised Steel Ducting

398 Airco 900CBX Centrifugal Fan, serial no. 2147/00597-01, with Vem electric motor

399 Abbott 1000 litre Vertical Welded Steel Air Receiver, serial no. A52317

400 Airco 900CBW Centrifugal Fan, serial no. 2288/00197-02, with Brook Hansen 55kW electric motor, 1470rpm

401 Welded Steel Bulk Ink Storage Tank, approx. 1.26m x 1.76m x 2.5m deep-on-straight, with loadcells (red)

402 Welded Steel Bulk Ink Storage Tank, approx. 1.26m x 1.76m x 2.5m deep-on-straight, with loadcells (yellow)

403 Welded Steel Bulk Ink Storage Tank, approx. 1.26m x 1.76m x 2.5m deep-on-straight, with loadcells (blue)

404 Welded Steel Bulk Ink Storage Tank, approx. 1.2m dia. x 3.15m deep (black)

405 Arboga-Darenth 114-04 Filter Unit, serial no. 19104/06/00, year of manufacture 2000

406 Ducting, as set out

407 Eurocoils Heat Exchange Unit

408 Steel Supports, as set out

409 Stone Sets, as set out (offered by kind permission on behalf of another vendor)

410 Storage Chest

411 Storage Chest

412 Storage Chest

413 Lowara Stainless Steel Centrifugal Pump, with electric motor

414 Four IBC Frames, including two open top tanks

415 Four Timber Crates, with two cable drums

Lot Description 416 Mobile Roller Conveyor, 600mm wide on

rollers x 3m long overall

417 Six Plastic Box Crates, each with contents of paper briquettes

418 Seven Waste Bins (all with damaged/ missing castors)

419 Pedestrian Plant Bridge, 1.1m x 1.1m high clearance

420

421

422

FITTERS AND MAINTENANCE EQUIPMENT

423 Heme/ Lem LH1040 Clamp Meter

424 Fluke/ Robin 1653 Multi-function Tester, with case

425 Approx. Six Assorted Work Lamps, as set out

426 Quantity of Chairs and Stools, as set out

427 BVC Vacuum Cleaner, with hose

428 BVC Vacuum Cleaner, with hose

429 BVC Vacuum Cleaner, excluding hose 430 Numatic NRV200-22 Vacuum Cleaner,

with hose

431 EBM-PAPST Mancool500 Electric Fan, year of manufacture 2007

432 Prem-I-Air Electric Floor Fan; Desk Fan and Two Electric Pedestal Fans, as set out

433 Nine Stave Alloy Stepladder

434

435 Five Stave Alloy Stepladder

436 18 Rung Alloy Ladder

437 17 Rung Alloy Double Extending Ladder

438 18 Rung Alloy Ladder

439 Six Various Steel Toolboxes

440 Senator Two Section Mobile Steel Tool Cabinet

441 Yamoto Mobile Steel Tool Cabinet

442 Kennedy Mobile Steel Tool Cabinet

443 Mobile Steel Tool Cabinet

444 Mobile Steel Cabinet, with Clarke tool chest

445 Hahn & Kolb Orion Mobile Steel Tool Cabinet

446 Digital Sound Level (8921/8922), serial no. 3016226, with case

447 SKF TKRS 10 Stroboscope, serial no. 1335-13163, with case

448 SKF TMEH1 Oil Check Unit, with case

449 Stegmann Programming Tool, serial no. 81B001012023-000491, with case

Lot Description 450 SKF TMST 2 Stethoscope, with case

451 Hansford VBT30 Vibrometer, with case

452 QuadTech Color Control System Calibration Device, with case

453 Level, Tripod and Case

454 Chauvin Arnoux CA27 Tachometer, with case

455 Sick Stegmann Programming Tool, serial no. PGT-SC60-81B001012044, with case

456 Testo 325-1 Multi Tester (O2, CO2, CO, degree C/ degree F, hPa), with printer and case

457 Duratool Inspection Camera, with recordable monitor

458 Assorted Taps, Dies and Cutters, as set out in three boxes

459 Assorted Drills and Reamers, as set out in three boxes

460 Quantity of Hand Files

461 Quantity of Allen Keys, as set out

462 Sundry Micrometers and Dial Gauges, as set out

463 Square Level, in wood box

464 Two Various Height Gauges

465 Pal Control Cylinder Gauge

466 Various Bore Gauges and Blanket Watch

467 Mitutoyo 200-300/ 0.01mm Micrometer, in wood case and sundries as set out

468 Four Various Verniers, as set out

469 Ridgid 550-1 Electronic Pipe Saw, 110V, in steel case

470 Ridgid 690 Pipe Threader, 110V, in steel case

471 Kango Type 950 Electric Breaker, serial no. 048486, 240V, in steel case

472 Skiving Tool

473 Wolf Sapphire Electric Drill, 240V, with Limpet electro-magnetic base

474 Habasit Belt Jointing Equipment, as set out, 110V

475 DeWalt DW875 Cut-off Saw, 110V

476 Various Tools and Equipment, including heat gun, glue gun, torch, hand held scanners, engraver, labeller and drivers, mainly 240V/ rechargeable

477 Bosch Angle Grinder and AEG Angle Grinder, 240V

478 Makita 5604R 165mm Circular Saw, 110V

479 Two DeWalt Drill Drivers, One Battery and Charger, 240V

480 DeWalt Heat Gun and RS 137-200 Heat Gun, 240V

Lot Description 481 Metabo Rechargeable Power Grip Driver,

Bosch Jigsaw and Silverline Jigsaw, mainly 240V

482 Atlas Copco Hammer Drill, 240V, with case

483 Hilti TE15-C Hammer Drill, 110V, with case

484 Hitech/ Magnatech ME5000 Electro-Magnetic Broaching System, with magnetic base, 110V, with case

485 Three Submersible Pumps, 110V

486 Tangye RSC250E 20 tonnes cap Press, with Enerpac Hydraulic Pump, on steel bench

487 Seaward PAT2000 Portable Appliance Tester

488 Crompton Model 750 Stroboscope

489 Salter Electromail V 30kg max Electronic Postal Scales

490 Various Meters, including universal counter timer, 20mHZ oscilloscope, digital conductivity meter and Thurlby 30V-2A volt/ amp meter

491 Various Meters and Testers, including Avometer 8, two digital hand tachometers, multi meter, oscillator and digital loop tester, as set out

492 ISSC/ Electronic Processors STR Link IIA Model 365 Pulsatronic Magnetic Tape Cassette Read/ Write Unit

493 ISSC IPC 396 Loader Moniter

494 Soldering Iron, 240V

495 Enerpac Turbo II Air Pump

496 Enerpac Hand Hydraulic Pump, with hose and jacks

497 Two Hand Hydraulic Pumps, as set out

498 OTC P55 Hand Hydraulic Pump, with spool saving attachment

499 Tidland Hand Hydraulic Pump, with spool saving attachment

500 Quantity of Assorted Air Tools, as set out

501 Four Stamp Presses

502 Fag Heater10 Induction Heater, serial no. 0408023

503 SKF TMFT36 Bearing Fitting Tool and Equipment, in case

504 Twinpull Bearing Puller and Sundry Tools, as set out

505 Quantity of Thread Repair Tools

506 Quantity of Grinding and Cutting Disks and Sanding Pads, as set out

507 Pair of Snow Chains

508 Quantity of Lifting Slings and Wire Rope, as set out

Lot Description 509 Quantity of Eye Bolts, as set out in two

boxes

510 Yale Hand Chain Tensioner

511 Pfaff Hand Chain Tensioner

512 Two 1 tonne and One 500kg Hand Chain Blocks

513 Tangye-Epco 20 tonnes Hydralite Toe Jack

514 Tangye-Epco 20 tonnes Hydralite Toe Jack

515 Ernest Lake 5 tons Toe Jack

516 Four Machine Skates

517 Pair of Machine Skates (small)

518 Sundry Clamps, as set out

519 Five Wrenches and Pipe Chain Wrench, as set out

520 Quantity of Hand Tools, as set out

521 Quantity of Lubricant Dispensers for Oil and Grease, as set out

522 BOC Mig 250C Mig Welding Set, serial no. 71519591X, 240V

523 Oxy Gas Welding Set and Trolley

524 CEA 180A Arc Welding Set, 240V

525 Stel MAX130 Inverter Stick Welding Set, 240V

526 Cebora Pocket Turbo 130 Welding Set, serial no. IP21/649194, 240V

527 11kVA Portable Spot Welder, 240V

528 Quantity of Welding Rods, as set out

529 BOC Autotracker and Xelux Shademaster Welding Masks

530 Three Cutting Torches and Two Heating Guns, as set out

531 Sundry Welding Nozzles, in case

532 Quantity of Safety and Road Signs, as set out

533 Two Gretag Macbeth Colour Meters 534 Quantity of Mainly Habasit Electrically

Heated Presses, as set out in two boxes

535 20 litre Weed Sprayer and Line Marker, as set out

536

537 Rocol Sentinel Wheel Clamp

538 Transformer and Extension Leads, as set out

539 Quantity of Fasteners, including nuts, bolts and plates, as set out on pallet

540 Sundry Metal Parts and Fittings, as set out on pallet

541 Steel Mobile A-Frame Lifting Gantry, approx. 4000mm wide, fitted two carriages and Morris 2 ton hand chain block

Lot Description 542 Insulated Container Unit, approx. 3000mm

x 2440mm, fitted door, window, extraction fan and lighting

543 GIS Type 50/F 500kg Electric Chain Block, serial no. 73056.02

544 Three Seiko TP-20 Time Recorders

545-550 Blank

MAINTENANCE ROOM

551 Quantity of Ring and Open End Spanners, Sockets and Ratchets, as set out

552 Five Torque Wrenches, as set out

553 Sundry Parts and Fittings, as set out on shelf of bench

554 Steel Top Bench, 2000mm x 800mm

555 Quantity Parts and Fittings, as set out on wood shelf unit

556 Three Rivet Tools, as set out

557 Quantity of Mallets, as set out

558 Quantity of Slide Hammers, as set out

559 Quantity of Dies and Tap Wrenches, as set out

560 Quantity of Circlip Pliers, as set out

561 Quantity of Parts and Fittings, as set out on shelf of rack

562 Steel Top Bench, 2000mm x 800mm

563 Quantity of V Belts, as displayed on wall

564 Sykes-Pickavant Pulling Tool Kit, as set out on two wall boards

565 Sealey SA892 Retracting Air Hose Reel

566 Record Tube Bender

567 Colchester Mascot 1600 420mm swing x 1600mm between centres Sliding Surfacing and Screw Cutting Lathe, serial no. 7/0203/12688, with tools and equipment as set out

568 A B Arboga Maskiner ER1830 2ft Radial Arm Drilling Machine, serial no. 92334

569 Delta LA-300 Flat Surface Grinding Machine, on B & S base

570 Model KTF-13 Bench Pillar Drilling Machine, serial no. 02669, on steel pedestal

571 Bridgeport Turret Milling Machine, serial no. 199541074S (order no. 50852), 42in. x 9in. table overall

572 Record No. 23 4in. Engineers Bench Vice

573 Record No. 23 4in. Engineers Bench Vice

574 Record 4½in. Engineers Bench Vice

575 Two Machine Vices, as set out

576 Marking Out Equipment, as set out

577 Double Ended Pedestal Grinding Machine, 200mm dia.

Lot Description 578 Steel Bench, 2500mm x 800mm

579 Quantity of Belting Material, as set out

580 Quantity of Mann Air Filters, as set out

581 Quantity of Electrical Fittings, including fuses, wire and fixings, as set out on two shelves over bench

582 Sundry Machine Spares, as set out on bench and on lower shelf of bench

583 Wood Bench, 2750mm x 950mm

584 Wood Bench, 3600mm x 850mm

585 Quantity of Fasteners and Fixings, as set out in four steel bin racks and plastic bins on wall (racks and bins included)

586 Double Door Steel Cupboard and Contents, including paints and adhesives, with two steel drawer units

587 Mainly Lighting Equipment and Spares, as set out in cupboard

588 Mainly Plumbing Spares, as set out in cupboard

589 Quantity of Lighting Consumables, as set out on top of two cupboards

590 Mainly Electrical Parts and Fittings, as set out in cupboard

591 Two Triumph Double Door Steel Cupboards (reserve removal until contents cleared)

592 Twinlock Multi-stor Double Door Steel Cupboard, Double Door Steel Cupboard and Double Door Steel Cupboard with Drawers (reserve removal until contents cleared)

MAINTENANCE STORES

593 Quantity of Chain and Spares, as set out on rack

594 Quantity of Spares, as set out in cupboard (mainly for Kolbus)

595 Quantity of Spares, as set out in cupboard (mainly for KBA)

596 Electrical Parts and Fittings, as set out in cupboard

597 Four Double Door Steel Cupboards and Steel Rack (reserve removal until contents cleared)

598 Quantity of Spares, as set out on six shelves of rack (understood to be suitable for Muller Martini/ Avanti)

599 Quantity of Spares, as set out on five shelves of rack (understood to be suitable for Baker Perkins G14)

600 Quantity of Spares, as set out on five shelves of rack (understood to be suitable for Baker Perkins G14)

601 Air/ Pneumatic Spares, including cylinders and hosing, as set out on five shelves of rack and top of rack

Lot Description 602 Mainly Electrical Spares, as set out in

cupboard

603 Four Double Door Steel Cupboards (reserve removal until contents cleared)

604 Miscellaneous Spares, as set out in four drawers of cabinet including switches, sensors, networking cables and electronics with four drawer steel filing cabinet

605 Quantity of Bearings and Bearing Housings, as set out in plastic boxes on steel rack

606 Quantity of Bearings, as set out on six shelves of steel rack

607 Quantity of Mann Filters, as set out on two shelves

608 Sundry Spares, including valves, gears, pump, as set out on eight shelves of rack

609 Double Sided Four Bay Demountable Steel Shelving/ Racking (reserve removal until contents cleared) (plastic boxes excluded)

610 Three Bay Demountable Steel Shelving/ Racking (reserve removal until contents cleared) (plastic boxes excluded)

611 Quantity of Various Spares, as set out in two bays of rack (understood to be mainly for Muller Martini and Baker Perkins G14)

612 Quantity of Electrical Fittings, including contactors, relays and switches as set out in boxes on rack

613 Loose Furniture Contents of Office, including two desks, two filing cabinets and three chairs

614 Loose Furniture Contents of Engineers Office, including four desks, three double door steel cupboards, seven filing cabinets and four chairs

CHEMICAL STORES 615 Quantity of Oils and Grease, as set out

616 Quantity of Ink and EG Isopropanol Alcohol, as set out

617 Quantity of Filter Pads, as set out on rack

618 Quantity of Tape, Barrier Cream, Roller Gel, Tissues and Paint, as set out in cupboard

619 Quantity of De-greaser and Cleaner, as set out (six barrels)

620 Steel Shelving (seven bays) and Steel Cabinet (no doors)

621 Contents of Cleaners Store, including brushes, shovels, mop bucket and steel shelving as set out

622 Contents of First Aid Room (in Ladies Toilets), including first aid kit consumables, couch, chair, table and seven steel locker units

623 Approx. 38 Steel Locker Units, as set out in Gents toilets

Lot Description 624 Loose Furniture Contents of Canteen,

including three tables and seven chairs

625 Refrigerator, Fridge Freezer and Samsung Microwave Oven

626 Two Waterlogic Chilled Water Dispensers

627 Two Barrel Trolleys

628 Steel Bogey

629 Alloy Stairclimber Truck

1630 Two Steel Sack Trucks

631 Electric Pump, on steel trolley

632 Two Barrel Trucks

633 Parts Washing Bath, approx. 1100mm x 500mm

634 Parts Washing Bath, approx. 2100mm x 450mm

635 Quantity of Hand Pumps

636 Quantity of Wheeled Bins

637 12 Steel Bins/ Bin Frames

638 Quantity of Mainly Plastic Bins and Barrels, as set out

639 Quantity of Solvent Tins and Solvents, as set out

640 Three Spill Trays, approx. 1660mm x 1260mm

641 Three Spill Trays, approx. 1260mm x 860mm

642 Two Spill Trays (small)

643 Mobile Access Step

644 Access Steps (red)

645 Access Steps (blue)

646 Six Various Steps

647 Alloy Scaffold Tower

648 Quantity of Steel Cabinets, Racks and Wood Benches, as set out

649 Three Slope Top Steel Cabinets

650 Six Wooden Step Units

651 Six Wooden Step Units

652 Four Wooden Work Platforms

653 Four Wooden Work Platforms

654 Two Wheeled Cage Trucks

655 Four Caged Stillages

656 Three Caged Stillages

657 Comac Media24 Pedestrian Operated Sweeping Machine, serial no. 85006704, with charger

658 Comac CS50BT Pedestrian Operated Sweeper, serial no. 0538193783, with charger

659 Steel Framed Bench, approx. 2400mm x 850mm

Lot Description 660 Steel Framed Bench, with cupboards,

approx. 1500mm x 700mm

661 Steel Framed Bench, approx. 1500mm x 750mm

662 Steel Framed Bench, with cupboard under, approx. 2000mm x 700mm

663 Quantity of Paper Guillotines/ Trimmers

664 Wheeled Wood Bench, approx. 3700mm x 900mm



667 Approx. Nine Assorted Wood Benches

668 Two Senator Benches, each approx. 1350mm x 500mm

SUNDRY STOCKS 669 Two Reels x 0.6mm MP100 Galvanised

Stitching Wire

670 Approx. Eight Rolls of Strap Banding

671 Nine Rolls of Strapex Strap Banding

672 Ten Rolls of Strap Banding (white)

673 16 Rolls of Strap Banding (blue)

674 Quantity of Cardboard Packaging Material

675 Quantity of Adhesive and Lacquer, as set out on pallet

676 Four Barrels of DS Acedin Sprint 210-X Fountain Solution and One Barrel of Pressmax Silmax G70CXT Silicone Emulsion

677 Quantity of Chemicals, including potassium hydroxide solution, pro-web gold and developer, as set out on pallet

678 Quantity of Paraffin and PVA, as set out on pallet

678A Forbo Adhesives, 15 x 15kg Boxes of Swift 2H776E Hot Melt Glue and 14 x 15kg Boxes of Swift Melt-9061 Hot Melt Glue

678B Technomelt Pur3317 BR Adhesive

678C 12 Boxes of Technomelt GA3840 Granules, 2 x 20kg Bags of Forbo Adhesives and Quantity of Technomelt 3710 Granules

679 Quantity of Black Shrink Wrap, as set out on pallet

680 Quantity of Cardboard Packaging Material, as set out on 11 pallets

681 Quantity of Filters, as set out on pallet

682 Quantity of Board Material, as set out

683 Paper Stack, as set out on pallet

684 Quantity of Polythene Film, as set out on pallet

Lot Description 685 Quantity of Polythene Film, as set out on

pallet






691 Andrews G260 Gas Fired Portable Heater

692 Table, Two Benches, Two Hat Stands, Stools and Chair, as set out

693 Steel Framed Bench, 2000mm x 850mm , fitted angle shear

694 Steel Framed Bench, 1850mm x 750mm

695 Five Various Benches, as set out

696 Tubular Steel Trolley

697 Two Sacks of Henkel Purmelt Cleaner 2 Hot Melt Adhesive

698 Quantity of Bayer Makrolon Clear Plastic Sheet

699 Two Steel Framed Desks and Four Bay Steel Demountable Shelving/ Rack

700 Nine Rubber Mats, each 1500mm x 900mm

701 Seven Bays of Multi-tier Steel Shelving

702 Two Double Door Steel Cupboards

703 Loose Furniture Contents of Canteen, including three tables, nine chairs, Tefal oven and refrigerator

704 Waterlogic Chilled Water Dispenser

705 Hewlett Packard HP Pro Personal Computer, with flat screen and printer (hard disk removed)

706 Double Pedestal Desk, Wood Bench and Eight Steel Locker Units

707 Mettler Toledo IND429 Digital Platform Weighing Machine, with 1250mm x 1500mm platform

708 Robopac Rotoplat 506 PSF Rotary Pallet Wrapping Machine, serial no. KN/069247, year of manufacture 2005, with 1640mm dia. platform

709 Europack Rotary Pallet Wrapping Machine, serial no. 14259, with 1630mm dia. platform

710 Strap Banding Equipment

711 Strap Banding Equipment

711A Zapak Rechargeable Strapping Tool, with charger

712 Two Steel Stillages

Lot Description 713 Tubular Steel 14 Rise Warehouse Steps

714 Tubular Steel Five Rise Warehouse Steps

715 F L & Co TYPE 20 TEN BAY x MAINLY SIX TIER BOLTLESS STEEL PALLET RACK, approx. 8000mm high uprights, 2700mm wide beams and wood shelves (reserve removal until contents cleared) (PR1)

716 F L & Co TYPE 20 TEN BAYS x MAINLY SIX TIER BOLTLESS STEEL PALLET RACK, approx. 8000mm high uprights, 2700mm wide beams and wood shelves (reserve removal until contents cleared) (PR2)

717 F L & Co TYPE 20 FIVE BAYS x AVERAGE FIVE TIER BOLTLESS STEEL PALLET RACK, part up to approx. 8000mm high uprights, 2700mm wide beams and wood shelves (reserve removal until contents cleared) (PR3)

718 F L & Co TYPE 20 FIVE BAYS X FIVE TIER BOLTLESS STEEL PALLET RACK, part up to approx. 8000mm high uprights (average), 2700mm wide beams and wood shelves (reserve removal until contents cleared) (PR4)

719 F L & Co Type 20 Boltless Steel Pallet Rack Components, including ten 7000mm high uprights and approx. 40 pairs of 2700mm wide beams (dismantled)






725 Two F L & Co Type 20 Four Tier Boltless Pallet Racks, approx. 7000mm high uprights and 2700mm wide beams (reserve removal until contents cleared)

726 Approx. 500 Wood Shelves, as set out in yard

727 F L & Co Type 20 Two Bay x Five Tier Boltless Steel Rack, approx. 7000mm high uprights, 2700mm wide beams and wood shelves

Lot Description 728 F L & Co Type20 Two Bay x Five Tier

Boltless Steel Pallet Rack, approx. 7000mm high uprights, 2700mm wide beams and wood shelves

729 Two F L & Co Five Tier Boltless Steel Pallet Racks, approx. 2100mm high uprights, 2700mm wide beams and wood shelves

730 F L & Co Type 20 Three Bay Multi-tier Boltless Steel Pallet Rack, approx. 4700mm high uprights, 2700mm wide and 1300mm wide beams with wood shelves

731 F L & Co Type 20 Two Bay Multi-tier Boltless Steel Pallet Rack, approx. 4600mm high uprights, 2700mm wide beams and wood shelves

732 Feralco Type 20 Two Bay Multi-tier Boltless Steel Pallet Rack, approx. 5600mm high uprights, 2700mm and 1300mm wide beams and wood shelves

733 Symbol MC9090 Hand Held Barcode Scanner, with charger, spare battery and power lead

734 Symbol MC9090 Hand Held Barcode Scanner, with charger, spare battery (no power lead)

RTO STORE

735 Water Treatment Equipment, as set out

736 Two Steel Racks and Contents, as set out

737 Quantity of Steel Stock, including flat, tube and bar, as set out, with stock rack

738 Digidown Lisle Digital Tachograph Data Download Device (in Maintenance Office)

YARD 739 Three Wheeled Steel Bins, approx. 940mm

dia. x 1300mm high

740 Three Wheeled Steel Bins, approx. 940mm dia. x 1300mm high (reserve removal until end of clearance period or sooner if available)

741 Two Wheel Steel Bins, approx. 1200mm dia. x 940mm high

742 Two Wheel Steel Bins, approx. 1200mm dia. x 940mm high (reserve removal until end of clearance period or sooner if available)

743 Six Steel Bins, approx. 940mm dia. x 1300mm high

744 Hewlett Packard Personal Computer, with screen and printer (in Bindery Office) (hard disk removed)

745 Loose Furniture Contents of Bindery Office, including two desks, filing cabinet, three chairs and wood unit

746-799 Blank

Lot Description OFFICES

OPEN PLAN OFFICE 800 Two Desks

801 Double Door Wood Cupboard and Pedestal

802 Desk and Double Door Cupboard

803 Desk and Two Pedestals

804 Desk, Two Double Door Cupboards and Pedestal

805 Desk

806 Desk

807 Desk

808 Desk

809 Two Pedestals

810 Two Pedestals

811 Three Grey Desks

812 Desk, Double Door Cupboard and Pedestal

813 Desk, with return unit

814 Two Double Door Cupboards and Two Pedestals

815 Desk

816 Gents Wood Cased Pendulum Clock

817 Seven Chairs

818 Two Four Drawer Wood Filing Cabinets

819 Two Three Drawer Wood Filing Cabinets

820 Three Wood Stationery Cupboards

821 Two Three Drawer and One Two Drawer Steel Filing Cabinets

822 Three Three Drawer Steel Filing Cabinets

823 Two Metal Desks

824 Three Office Armchairs

825 Three Office Armchairs

826 Office Screen

827 Hat and Coat Stand and Mobile Clothes Rack

828 Rosengrens Steel Safe

829 Apple Power Mac G4 Computer (hard drive removed)

830 Two Hewlett Packard Compaq Personal Computers (hard disk removed)

831 Zoostorm Personal Computer (hard disk removed)

832 Two Hewlett Packard Compaq Personal Computers (hard disks removed)

833 Two Personal Computers (hard disks removed)

834 Fujitsu Siemens Personal Computer (hard disk removed)

835 Dell Vostro 200 Personal Computer (hard disk removed)

Lot Description 836 Three Personal Computers (hard disks

removed)

837 Hewlett Packard xw6400 Personal Computer (hard disk removed)

838 Two Hewlett Packard Compaq Personal Computers (hard disks removed)

839 Sony Vaio Laptop Computer (hard disk removed)

840 Laptop Computer (hard disk removed)

841 Hewlett Packard Laptop and Samsung Tablet and Keyboard (hard disk removed)

842 Hewlett Packard 550 Laptop (hard disk removed)

843 Lenovo E530 ThinkPad Edge Laptop (hard disk removed)

844 Siemens Sigmatic Field PG Laptop (hard disk removed)

845

846

847

848 Hewlett Packard LaserJet P1005 and 1022n Printers and Epson Scanner

849 Hewlett Packard Photosmart 2575 All-in-One and Hewlett Packard LaserJet P1606d Printers

850 Hewlett Packard LaserJet P2015n, Deskjet 2460 and P1505n Printers

851 Samsung SF515 Fax Machine

852

853 Tower Computer, Wide Screen Monitor and Keyboard (hard disk removed)

854 Ten Desk Fans

855 LG Flatron W3000H Wide Screen Monitor

856 Three Hanns.G HG2S1D Wide Screen Monitors

857 Three Viewsonic VA2421uma Wide Screen Monitors

858 Two Hanns.G HH241 Wide Screen Monitors

859 Two Acer AL2216W Wide Screen Monitors

860 Two Acer AL2216W Wide Screen Monitors

861 LG LED 20EN33 and Lenovo L2021WA Wide Screen Monitors

862 863 Quantity of Office Waste Bins

864 Two Pedestal Fans

865 Quantity of Office Requisites

866 Four Label Printers

867 Konica Minolta Z5 Digital Camera

Lot Description 868 Loose Furniture Contents of Kitchen,

including Candy refrigerator and Tricity Marquis cooker

869 Quantity of Office Requisites

869A Quantity of Toner Cartridges

MANAGERS OFFICE 870 Loose Furniture Contents of Office

MANAGING DIRECTOR’S OFFICE 871 Meeting Room Table and Eight Chairs

872 Five Reception Type Chairs, with corner chair

873 Two Occasional Tables

874 Office Swivel Armchairs

875 Part Glazed Display Cabinet

876 Display Cabinet

877 Three Chairs

878 Chubb Combination Safe

SIDE ROOM

879 Black Leather Effect Settee and Two Armchairs

880 Occasional Table and Philips Fridge/ Bar Unit

881 Sony Play Station 2

882-899 Blank PHOTOGRAPHIC STUDIO AREA 900 Bowens Hi-Glide Studio Ceiling Rail

System, approx. 11.6m x 7m, including equipment carriages, curtain runners and curtains

901 Two Broncolor Pulso 2 Power Packs



904 Broncolor Pulso 2 Power Pack




908 Broncolor Pulso 4 Type 32.124.12 Lamp Head Unit, with Bowens-Lite lift 1.8m pantograph

909 Broncolor Pulso 4 Type 32.124.12 Lamp Head Unit, with 600mm x 600mm Broncolor Pulsoflex EM soft box and Bowens-Lite lift 1.8m pantograph

910 Broncolor Pulso 2 Type 32.122.12 Lamp Head Unit, with Bowens-Lite lift 1.8m pantograph

911 Broncolor Pulso 2 Type 32.122.12 Lamp Head Unit, with light shaper attachment and Bowens-Lite lift 1.8m pantograph

Lot Description 912 Broncolor Pulso 2 Lamp Head Unit, with

1800mm x 460mm Broncolor Pulsoflex EM soft box and Broncolor 112AC impact air cushioned tripod

913 Broncolor Pulso 2 Lamp Head Unit, with 1800mm x 460mm Broncolor Pulsoflex EM soft box and Broncolor 112AC impact air cushioned tripod

914 Broncolor Pulso 4 Lamp Head Unit, with 600mm x 600mm Broncolor Pulsoflex EM soft box boom arm and Bowens tripod

915 Broncolor Pulsospot 4 Type 32.425.12, with Bowens tripod

916 Two Matthews 756140 40in. Tripods

917 Two Broncolor Impact Air Cushion Tripods

918 Three Various Tripods

919 Tripod, with boom

920 Two Equipment Stands

921 Two Broncolor Pulso 2 and One Broncolor Pulso 4 Lamp Head Unit

922 Bowens Jet Stream Wind Machine

923 Propress 3800 MK II Steamer

924 Writing Bureau

925 Sideboard

926 Three Tables and Five Chairs

Lot Description 927 Two Kick Stools

928 Hotpoint Ultima Condenser Dryer and Hotpoint WMA20 Washing Machine

929 Tubular Solar Hot Water System, comprising approx. 117 1800mm x 70mm dia. tubes and four 2m x 2.3m sectional frames

930 Atco Commodore B17 Petrol Engined Cylinder Lawnmower

931 Atco Royale B20 Petrol Engined Cylinder Lawnmower

932 Six Drawer Plan Chest

933 Three Double Door Cupboards, One Three Drawer Filing Cabinet and One Four Drawer Filing Cabinet

934 Part Glazed Display Cabinet

935 Sideboard

936 Three Chairs

937 Skil-Saw 1865U3 184mm Circular Saw and Black & Decker Jigsaw

938 AEG ASBE16 Drill Driver, with charger, and Black & Decker BD209 Powerfile

939 Sealey BG150XD 6in. dia. Bench Grinder

940 Garage Car Creeper and Seat

941 Quantity of Photographic Props PRIVATE TREATY (Available immediately)

A KBA COMPACTA 618 48PP FOUR UNIT DOUBLE CAPACITY WEB OFFSET PRINTING PRESS, serial no. K319/60902500 (2003), with floor mounted reel cart, KBA Pastomat RC double sided reel stand, 1m x 1.24m loadcell weigh platform, tension rolls, four print units (shaftless) with sem-auto plate loading, Megtec Dual-Dry DDTNV 15.3/1524 gas fired dryer, serial no. 0114SV/JN116674 (2003)/(42500 cph/14.6m per second), paper width 1460mm, cut-off 620mm, KBA/ KWS six roll chill unit, serial no. K319 (2003), Elguider guide unit, Quadtech register unit, serial no. 963311-1-1 (2005), web direction changer, KBA combination folder/ cutter with spine gluing facility, twin deliveries and merge-stream facility, Techno Trans Delta D damping, Aquatech pressurisation unit, control panels, Faist acoustic press room enclosure, ergotronic control desks, Logotronic ink control desk, Opera control desk, Colortronic ink control desk readout (closed loop colour control), Quadtech register and colour readouts, Robatech webtech system, Bielomatik lubrication system, four mobile plate racks, multi-band discharge conveyors, transfer conveyor, Muller Martini horizontal log bander 0397 0400-21 (pits in floor to be filled and screeded following removal of equipment) (holes in walls and roof to be made good by purchaser) (no main incoming cable included – available privately)

A1 Recmi DIRECTION CHANGE UNIT AND OVERHEAD CONVEYOR, serial no. 03047 (2004), with two feed conveyors, overhead conveyor and receiving station

A2 LOG STACKER AND PALLETISER LINE, comprising:- automatic gate and stand, control panel, Muller Martini Avanti horizontal log stacker, serial no. MMZO 383 229 MMEZ 390 977, Muller Martini/ Strapex bander, serial no. 01467 (2000) and Muller Martini palletiser, serial no. MMZO 383 229 MMEZ 390 983 fitted Sick photo electric beam guard

A3 Gammerler TRIMMING AND STACKING LINE, comprising Gammerler Band AA1200 Belt Conveyor, serial no. 111812, Gammerler PS300 trimmer feeder, serial no. 7272/2006, Gammerler EM120 direction changer, serial no. 7285/ 2006, Gammerler RS134/530 trimmer, serial no. 7273/2006, control panel, Gammerler RS134/530 trimmer, serial no. 7274/2006, Gammerler KL540 LPC stacker and conveyor, serial no. 7215/2006, Transpak strapper and belt delivery conveyor

A4 Lots A-A3 offered for sale as a one lot contract

A5 WATER CHILLING PLANT including Airedale Ultima 14 fan water chilling unit, six centrifugal water pumps, Rycroft GZSA2000 insulated and clad chilled water tank, serial no. 37908/1 (2003), valves, insulated piping to inside factory wall (holes in wall and roof to be made good by purchaser) and control panel (in press hall)

A6 Niche Air Heater Unit, with ducting over print units (hole in walls/ roof to be made good by purchaser) and internal control unit

A7 Aquatech Pressurisation Unit, with 2000 plus controller and Sentinel X100 inhibitor

A8 Kaeser Sigma SK19 Package Air Compressor, serial no. 0182779

A9 Abac WS13ABC Oil Condensate Separator

A10 MTA Dry Energy Hybrid DE012 Air Dryer, serial no. 38178800315 (2011)

A11 Eure 270L Vertical Welded Steel Air Receiver

A12 WATER PURIFICATION/ SOFTENING EQUIPMENT, including plastic tanks, pumps, Presscomfort unit, softening equipment and osmosis system

B Kolbus PERFECT BINDING LINE, comprising: - two Technology Integrations SLC-1000 signature log clamps, serial no’s 240 and 241, with Knight air balances, two Demag overhead travelling runways, steel supports, 12 Kolbus STA 840 log feeders, serial no’s 505 and 506, 510-515 and 542-545 (2008), Kolbus ZU 841/B 15 station gatherer, serial no. 176 (2005) and control panel, Kolbus AS 841 gate direction feeder, serial no. 227 (2008), with powered belt out feed conveyor and roller discharge conveyor, Kolbus KM411.B 25 station perfect binder, serial no. 1102 (2005), with delivery conveyors and glue feed units, Kolbus/ Nordson XNO910 glue melt unit, serial no. 23 (2005), Kolbus KM411.B control panel, serial no. 1102 (2005), Becker Variair Air Centre, Kolbus TS.E control panel, serial no. 66 (2005), Kolbus TSL belt conveyor, serial no. 492 (2005), Kolbus/ AmbaFlex XAF-600 spiral drying elevator, serial no. 201 (2005), Kolbus TSL overhead belt conveyor, serial no. 493 (2005), Kolbus/ Transnorm XTN 641 radius belt conveyor, serial no. 143 (2005), Kolbus TSL belt conveyor, serial no. 498 (2005), Ambaflex SV-400-1800 spiral lowerator, serial no. 6483-01 (2007), Kolbus TSL belt conveyor, serial no. 495 (2005), Kolbus TSL gate delivery conveyor changer, serial no. 62 (2005), Kolbus TSL belt conveyor, serial no. 496 (2005), belt conveyor, Kolbus HD152.P three knife trimmer, serial no. 1075 (2005), Kolbus HD152.P control panel, serial no. 1075 (2005) , Kolbus TSL belt conveyor, serial no. 500 (2005), Kolbus ZO841.B belt conveyor, serial no. 176 (2005), 500mm wide on belt x 2.5m centres long

B1 Wohlenberg TS11 BOOK SAW, serial no. 2950-003, with AmbaFlex AF-400 plastic track feed conveyor, serial no. 2116-18 (2006), discharge conveyor, steel supports and timber access staging

B2 Rima/ Kolbus RS-311OS/ XRS130 STACKER, serial no. 337 592-10 (2004)/ 138 (2005), with feed and discharge conveyor

B3 Belt Conveyor, 340mm wide on belt x 2.5m centres long (ref. 31)

B4 Kolbus TS.T Belt Conveyor, serial no. 83 (2005), 340mm wide on belt x 2.05m centres long (ref. 32)

B5 Belt Conveyor, 490mm wide on belt x 2.65m centres long

B6 Belt Conveyor, 430mm wide on belt x 1.14m centres long

B7 Kolbus TS.L Belt Conveyor, serial no. 501 (2005), 440mm wide x 750mm centres long

B8 AmbaFlex AF-400 Plastic Slat 180º Conveyor, serial no. 2446-27 (2006), 400mm wide

B9 Rima RS100 Blocking Unit, serial no. 100.0080 (2001)

B10 Muller Martini 6214 FILM WRAPPER, serial no. 75928-3 (2003)

B11 EDL S70 SHRINK WRAP TUNNEL, serial no. 34563R, with cooling fan

B12 Pakseal/ Schneider M40 STRAPPER, serial no. 2621 (2000)

B13 Kolbus FST Belt Conveyor, serial no. 261 (2004), 380mm wide on belt x 2.75m centres long

B14 Powered Roller Conveyor, 500mm wide on rollers x 3m long

B15 WST Systemtechnik PD30 PALLETISER, with pallet feed and sheet feed

EXCELLENT WEB OFFSET PRINTING PRESSES, BINDING ......PACKING LINES, PRE-PRESS EQUIPMENT AND FACTORY...

Documents

Transcript of EXCELLENT WEB OFFSET PRINTING PRESSES, BINDING ......PACKING LINES, PRE-PRESS EQUIPMENT AND FACTORY...