ETS-Lindgren - AMS-8050 Antenna Measurement System - NIT Pune

Table of Contents 2 of 24 AMS-8050 Antenna Measurement System

Table of Contents

1. SOLUTION OVERVIEW ...................................................................................................................... 3

1.1 Primary System Specifications ................................................................................................ 3 1.2 Diagrams & Examples ............................................................................................................. 4 1.3 Setup & Calibration Services ................................................................................................... 4 1.4 Customer Responsibilities ....................................................................................................... 5

2. PRICING SUMMARY ........................................................................................................................... 6

2.1 Baseline System Pricing .......................................................................................................... 6 2.2 Optional Pre-Compliant Wireless Technology Test Packages ............................................... 6 2.3 Common Options..................................................................................................................... 7

3. BASELINE SYSTEM CONFIGURATION ............................................................................................ 8

3.1 RF-Shielded Enclosure & Related Components ..................................................................... 8 3.2 Setup & Calibration Services ................................................................................................... 8

4. PRE-COMPLIANT WIRELESS TECHNOLOGY TEST PACKAGES ................................................. 9

4.1 Cellular Test Package (Optional) ............................................................................................ 9 4.2 Wi-Fi Test Package (Optional) ................................................................................................ 9 4.3 LTE-SISO Test Package (Optional) ...................................................................................... 10 4.4 A-GPS (2G / 3G) Test Package (Optional) ........................................................................... 11 4.5 A-GPS (4G / LTE) Test Package (Optional) ......................................................................... 11 4.6 Bluetooth Test Package (Optional) ....................................................................................... 12 4.7 RSE Test Package (Optional) ............................................................................................... 12 4.8 TD-SCDMA Test Package (Optional).................................................................................... 13

5. ADDITIONAL OPTIONS .................................................................................................................... 14

5.1 Common Options................................................................................................................... 14 5.2 Optional Dipole Antennas (4G / LTE) .................................................................................... 15 5.3 Software Maintenance Options ............................................................................................. 16 5.4 Extended Service Plan Option .............................................................................................. 17 5.5 Onsite Assembly Options ...................................................................................................... 18

6. PAYMENT TERMS & DELIVERY ...................................................................................................... 19

6.1 Remittance Information ......................................................................................................... 19 6.2 Price Validity .......................................................................................................................... 19 6.3 Standard Shipping Terms ...................................................................................................... 19 6.4 Estimated Delivery Schedule ................................................................................................ 19 6.5 Additional Clarifications ......................................................................................................... 20

7. TERMS AND CONDITIONS .............................................................................................................. 21

8. WARRANTY POLICY FOR RF SHIELDED ANECHOIC CHAMBERS ............................................ 24

Solution Overview 3 of 24 AMS-8050 Antenna Measurement System

1. SOLUTION OVERVIEW

ETS-Lindgren’s AMS-8050 Antenna Measurement System is built for testing a wide range of portable wireless devices and mobile handsets in free-space or by using a simulated human head and hands (optional). The system is a compact, fully-anechoic RF-shielded enclosure designed specifically for antenna pattern measurements. This over-the-air test system is ideal for wireless device measurements including: Pre-certification testing

Design validation

Performance measurement

Production sample testing The system is an ideal solution when space is a limitation as it is a self-contained, freestanding test chamber. The system’s portable chassis makes it an excellent choice for multiple research and development groups since it can be easily moved from one test group to another. The system includes integrated drawers for storing test equipment, cables and related accessories, allowing all of the components to conveniently travel with the system.

The system uses ETS-Lindgren’s EMQuest™ EMQ-100 Antenna Measurement Software as its data acquisition and analysis package. The baseline test suite includes fully automated 2-D (polar) and 3-D (spherical) pattern measurement capabilities as well as various frequency response measurements for both passive antennas and active wireless devices in either transmit or receive mode. General post-processing capabilities include calculation of antenna properties such as half power beam-width, directivity, gain, radiation efficiency, total radiated power, and total isotropic sensitivity, as well as various partial surface performance metrics required by the various OTA test requirements. Data can be exported to Microsoft® Excel and Adobe® PDF files or saved in Microsoft® RTF format. 1.1 Primary System Specifications

AMS-8050

Antenna Frequency Range

Model 3164-08 Open Boundary Quad-Ridged Horn Measurement Antenna (700 MHz – 10 GHz)

Path Length 1.50m (nominal)

Positioner Accuracy 0.2 deg / Resolution 0.1 deg

Shield Performance > 90 dB

Weight 1890 lb (860 kg)

Electrical Requirements Drive System 208/240 VAC 50-60Hz 10A NEMA 6-15 Equipment/DUT 115/230 VAC 50-60Hz 5A NEMA 5-15


1.2 Diagrams & Examples

This system diagram (right) shows the baseline system anechoic chamber and device controller along with Customer-supplied test instrumentation, RF and GPIB cabling (dotted lines), and Customer-supplied computer. The example below (left) shows the multi-axis positioning system (MAPS) with optional SAM Phantom Head. The model 3164-08 Open Boundary Quad-Ridged Horn measurement antenna and setup panel are shown on the right. The optional infrared camera is also shown below the antenna.

1.3 Setup & Calibration Services Setup and Calibration Services are included to assist AMS-8050 buyers located within the continental United States (travel outside the 48 states is available at an additional cost). This onsite service covers the initial start-up and orientation to the system. It includes: Verification of four delivered RF-cable assemblies and EMQ-100 software installation Hands-on system and basic EMQ-100 software operation demonstration for up to three

of your technical personnel Demonstration of the multi-axis positioner, DUT mount(s) and controller Verification of system performance by conducting range calibration using precision

sleeve dipole antennas (at the frequencies of the antennas ordered with the system or supplied by the Customer)

Instruction during calibration on the creation of parameter files and their use Demonstration of 2D and 3D Antenna Pattern Measurements using a known passive

antenna in free-space


The instruction provided by this service is limited to the content included in the User Manual and Set-up & Operation DVD. This service is provided with the assumption that the Customer has staff with existing expertise in wireless measurement systems and antenna pattern measurement. It is assumed that the personnel to be trained have a basic understanding of antenna pattern measurement science and the use of spectrum analyzers, vector network analyzers, and universal communication testers.

1.4 Customer Responsibilities Uncrate the system and move it into position prior to ETS-Lindgren arriving to perform

set-up and calibration services. Section 4.5 offers onsite assembly options for those situations where offloading and/or transport to the final location is not simple or possible

Provide the following power within 5 feet of the location where the AMS-8050 will be located: • 208/240 VAC 50-60Hz 10A NEMA 6-15 or 115/230 VAC 50-60Hz 5A NEMA 5-15

Provide ETS-Lindgren Model 3126-series precision sleeve dipole antennas for range calibration; whether purchased separately or part of an optional Test Package

Supply two (2) RF cables; one (1) loopback for calibration and one (1) switch cable to support set-up and calibration services and perform basic antenna measurements unless an optional Test Package is selected

Supply all cables necessary to perform any additional testing with the following exceptions: • ETS-Lindgren will supply the cables described in Section 3.1 as part of the baseline

configuration • If an optional Test Package is selected , ETS-Lindgren will supply the additional

cables required to perform the testing addressed by the selected Test Package(s) Instrumentation is not included with the baseline System. In general, the Customer may

choose to supply instrumentation or purchase it from ETS-Lindgren Inc. If the Customer chooses to supply instrumentation, they must ensure each component includes all options necessary to support the desired testing. ETS-Lindgren can assist with identifying these options. If any instrumentation options are specifically required by the included EMQuest™ Software, they are identified in each Test Package.

Pricing Summary 6 of 24 AMS-8050 Antenna Measurement System

2. PRICING SUMMARY

2.1 Baseline System Pricing

DESCRIPTION PRICE (USD)

AMS-8050 Antenna Measurement System including:

RF-Shielded Enclosure & Baseline Components

Setup & Calibration Services

TOTAL (EXCLUDING FREIGHT & SALES TAXES): $ 121,000

ESTIMATED FREIGHT:

2.2 Optional Pre-Compliant Wireless Technology Test Packages


Cellular Test Package (Section 4.1) $ 71,685

Wi-Fi Test Package (Section 4.2) $ 65,630

LTE-SISO Test Package (Section 4.3) $ 46,995

A-GPS (2G / 3G) Test Package (Section 4.4) $ 40,600

A-GPS (4G / LTE) Test Package (Section 4.5) $ 40,600

Bluetooth Test Package (Section 4.6) $ 57,090

RSE Test Package (Section 4.7) $ 80,710

TD-SCDMA Test Package (Section 4.8) $ 39,195

Pricing Summary 7 of 24 AMS-8050 Antenna Measurement System

2.3 Common Options


Software

Quarry Bundle for single EMQuest™ EMQ-100 Chamber Setup (QBU-EMQ-100) P/N 397500:

2 x Quarry Base: • Visualization, 2D charts, data grids • Access all Quarry projects for analysis and basic reporting to

PDF/Word/PPTX

1 x Quarry Chamber Data Source: ETS-Lindgren / EMQuest™ EMQ-100: • All OTA Data • Direct support with EMQuest/Test Executive • 3D Charting

1 x Quarry Reporting Module: Image File Import: • Import any graphic file (.png, .jgp, .gif, .bmp, .tiff, etc) into Quarry to include

in analysis/reporting

1 x Quarry Reporting Module: Word/Excel Advanced Reporting: • Automate any existing Word/Excel report (v. 2007 or newer) using Quarry

Tagging system. Sample report templates included: FCC SAR, FCC EMC Part15c, R&D antenna reports

$ 16,500

Pre and Full-Compliance Report Template (QSER-REP-PFC) P/N 397529 created for FCC, CTIA, etc. in Word/Excel format. Customer supplies one (1) completed report along with complete data set. Delivery time is typically one (1) week with thirty (30) day fine tuning. Annual updates are covered under the maintenance contract.

$ 1,500

TOTAL price excludes freight and sales taxes. All pricing is subject to the attached Terms and Conditions. A Purchase order may only be issued on a Final/Firm Fixed Proposal.

Detailed System Configuration 8 of 24 AMS-8050 Antenna Measurement System

3. BASELINE SYSTEM CONFIGURATION

3.1 RF-Shielded Enclosure & Related Components

MODEL NO DESCRIPTION QTY

RF-shielding

Series 101 • RF-shielded enclosure with nominal external dimensions of 8.25 x 4.60 x 6.20 ft. (2.52 x 1.42 x 1.88m)

1

Positioning & Switching Equipment

• Integrated Multi-Axis Positioning System (MAPS) 1

7000-001 • EMCenter™ Modular RF Platform including: 1

7006-001 EMControl™ Positioning Control Plug-in Card 1

7001-002 EMSwitch™ RF Switch Plug-in Cards – 4 x SPDT 1

• Free-space mount for optional SAM head 1

Antennas

Note: One or more Precision-Sleeve Dipole Antennas are required for range calibration. Dipoles are included with the optional Test Packages however, if no package is selected, a dipole must be purchased or provided by the Customer

3164-08 • Measurement antenna (700 MHz – 10 GHz) 1

• Circularly-polarized communication antenna (700 MHz – 3 GHz) 1

RF-Cabling

• Ferrite-beaded cables for range calibration (for use with 3126-series dipole antennas). May also be used for passive testing.

6

• RF cables; two between measurement antenna and controller, one for communication antenna, and one from MAPS to the controller

4

• Fiber optic control cables between the controller and MAPS 2

Software & Computer

EMQ-100 • EMQuest™ Antenna Measurement Software License Note: Three (3) developed drivers are included with this license and must be selected at time of order.

1

111069 • Workstation Computer including a Quad Core Processor, National Instruments GPIB Controller, Microsoft Windows® 7 Pro, Microsoft Office® Home and Business 2010, and 24” Widescreen LCD Display

1

3.2 Setup & Calibration Services


Baseline System Setup

• Two (2) days on-site set-up and training of personnel on AMS-8050 general operating instructions. See Section 3.4 for details.

1 Lot

Wireless Test Packages 9 of 24 AMS-8050 Antenna Measurement System

4. PRE-COMPLIANT WIRELESS TECHNOLOGY TEST PACKAGES

4.1 Cellular Test Package (Optional)


Antennas

3126-800 • Precision Sleeve Dipole 800 to 900 MHz 1




Software

• EMQuest EMQ-100 Drivers for Cellular testing including GSM, GPRS/EGPRS, CDMA 2k/1xRTT, 1xEVDO, WCDMA, HSUPA/HSPA+, and HSDPA. Note: Refer to Driver Selection Form for specific part numbers and supported communication instrumentation

7

RF-Cables & Integration Components

113336 • RF-cabling for integration of Cellular Package Components Note: Instrumentation not included with this package

1 Lot

• Limiting Amplifier 1

Integration

• Integration of the components in this package and orientation of lab personnel to the use of EMQuest™ EMQ-100 Software for Cellular Testing

1

4.2 Wi-Fi Test Package (Optional)


Positioning Components

110830 • Personal computing device mount (small laptop, tablet, PDA, etc.) 1

Antennas

3126-2500 • Precision Sleeve Dipole – 2350 to 2650 MHz Note: Includes standard calibration from 2250 – 2750 MHz with symmetry being less than 0.2 dB from 2312 – 2687 MHz

1

3126-5500 • Precision Sleeve Dipole – 5400 to 5600 MHz Note: Includes standard calibration from 5000 – 6000 MHz with symmetry being less than 0.2 dB from 5400 – 5600 MHz

1

• One (1) communication antenna for de-sense testing 1

Software

• Driver for Wi-Fi Communication Tester. Currently available for: Anritsu™ MT8860C (P/N 397057) – 802.11 a/b/g

1



Rhode & Schwarz™ CMW500 (P/N 397099) – 802.11 a/b/g/n


113336 • RF-cabling for integration of Wi-Fi Package Components Note: Instrumentation not included with this package

1 Lot

Dynamic Range Extender

115195 • Dynamic Range Extender for: Anritsu™ MT8860C / CMW-500

1

Integration

• Integration of the components in this package and orientation of lab personnel to the use of EMQuest™ EMQ-100 Software for Wi-Fi Testing

1

4.3 LTE-SISO Test Package (Optional)


Antennas


• Second communication antenna integrated within chamber Note: LTE testing requires separate uplink and downlink communications which is why this second communication antenna is included

1

Software

EMQ-109 • EMQuest™ LTE-SISO Expansion Package to support TRP/TIS and throughput testing. Currently available for: Rhode & Schwarz™ CMW500 (P/N 397067 – FDD) Rhode & Schwarz™ CMW500 (P/N 397100 – TDD)

Note: If Customer supplies CMW-500, LTE-FDD requires options KM500 and KS510 while LTE-TDD requires options KM550 and KS550. If Customer selects both FDD and TDD functionality, the price for one additional developed driver is added to EMQ-109.

Anritsu™ MT8820C (P/N 397068)

1


113336 • RF-cabling for integration of LTE Package Components Note: Instrumentation not included with this package

1 Lot

• Limiting Amplifier Note: If any other Test Packages are selected that contain this amplifier, it is no longer needed as long as the system has one (1) extra SPDT switch or the same communication tester is used.

1

Integration

• Integration of the components in this package and orientation of lab personnel on the use of EMQuest™ EMQ-100 Software for LTE testing

1 Lot


4.4 A-GPS (2G / 3G) Test Package (Optional)


Antennas

3126-1575 • Precision Sleeve Dipole for range calibration – 1425 to 1725 MHz 1

Software

EMQ-106 • EMQuest™ A-GPS Expansion Package. Currently available for: Spirent™ ULTS/PLTS (P/N 397054) Rohde & Schwarz™ CMU-200/SMU A-GPS Tester (P/N 397075) Note: Currently, the R&S® A-GPS solution only functions with Windows® XP operating systems. Selecting 397075 requires driver P/Ns 397009, 397011, or 397014 and the CMU-200 K90 option.

1 Lot


113336 • RF-cabling for integration of A-GPS (2G / 3G) Package Components Note: Instrumentation not included with this package

1 Lot


1

Integration

• Integration of the components in this package and orientation of lab personnel to the use of EMQuest™ EMQ-100 Software for A-GPS (2G / 3G) Testing

1

4.5 A-GPS (4G / LTE) Test Package (Optional)


Antennas

3126-1575 • Precision Sleeve Dipole for range calibration – 1425 to 1725 MHz 1

Software

EMQ-111 • EMQuest™ LTE A-GPS Expansion Package. Currently available for: Spirent™ 8100-B750-OTA-HW-01 (P/N 397104)

1


113336 • RF-cabling for integration of A-GPS (4G / LTE) Package Components Note: Instrumentation not included with this package

1 Lot


1

Integration

• Integration of the components in this package and orientation of lab personnel to the use of EMQuest™ EMQ-100 Software for A-GPS (4G

1



LTE) Testing

4.6 Bluetooth Test Package (Optional)


Antennas

3126-2400 • Precision Sleeve Dipole – 2250 to 2550 MHz 1

Software

• Drivers currently available for: Agilent™ N4010A Wireless Connectivity Test Set (P/N 397090) Anritsu™ MT8852B Bluetooth® Test Set (P/N 397116) Rhode & Schwarz™ CBT Bluetooth® Tester (P/N 397114)

1


113336 • RF-cabling for integration of Bluetooth Package Components Note: Instrumentation not included with this package

1 Lot

Miscellaneous

120232 • Bluetooth Dynamic Range Extender 1

118281 • Amplifier for Bluetooth Testing 1

Integration

• Integration of the components in this package and orientation of lab personnel to the use of EMQuest™ EMQ-100 Software for Bluetooth Testing

1

4.7 RSE Test Package (Optional)


Software

EMQ-107 • EMQuest™ Radiated Spurious Emissions (RSE) Expansion Package 1


113336 • RF-cabling for integration of RSE Package Components Note: Instrumentation not included with this package

1 Lot

Switch Control Platform

7000-001 • ETS-Lindgren EMCenter™ Modular RF Platform 1

7001-002 • EMSwitch™ RF Switch Plug-in Cards 4xSPDT 3

7001-003 • EMSwitch™ RF Switch Plug-in Cards 2xSP6T 2

Filters & Preamp

114991 • Filter Matrix with ten (10) high-pass filters and preamplifier (3U rack 1



height)

Antenna

3115 • Dual-ridged horn antenna (750 MHz to 18 GHz) 1

118320 • Mount to AMS-8050 MAPS for 3115 antenna 1

Integration

• Integration of the components in this package and orientation of lab personnel on the use of EMQuest™ EMQ-100 Software for RSE testing

1

4.8 TD-SCDMA Test Package (Optional)


Antennas



Software

• TD-SCDMA Driver. Currently available for: Agilent™ 8960 (P/N 397064) Anritsu™ MT8820C (P/N 397082) Starpoint™ SP6010 Communication Test Set (P/N 397049)

1


113336 • RF-cabling for integration of TD-SCDMA Package Components Note: Instrumentation not included with this package

1 Lot

• Limiting Amplifier Note: If any other Test Packages are selected that contain this amplifier, it is no longer needed. However, if the Starpoint™ solution will be used, one (1) extra SPDT switch is required.

1

Performance Testing & Integration

• Integration of the components in this package and orientation of lab personnel on the use of EMQuest™ EMQ-100 Software for TD-SCDMA OTA test

1


5. ADDITIONAL OPTIONS

5.1 Common Options


Positioning Components

SAM Phantom Head for CTIA over the air performance testing (P/N 111606) Note: Simulant liquid not included

$ 7,395

SPEAG phantom right-hand package (P/N 115585) $ 11,020

SPEAG phantom left-hand package (P/N 117836) $ 11,020

SPEAG right-hand mount assembly for AMS-8050 (P/N 115613) $ 1,400

SPEAG left-hand mount assembly for AMS-8050 (P/N 117120) $ 1,630

Right hand-only free-space mount - data mode (P/N 114253) $ 840

Left hand-only free-space mount - data mode (P/N 117275) $ 560

Mount for reduced (< 30cm) browsing position in front of the head Note: Does not allow rotation around AUT, but around the center of head.

$ 2,125

Common Components

Fully-integrated instrumentation rack (40U) including rear feed through panels, power distribution and associated cabling

$ 7,500

Enclosure Components

Infrared camera system with 15” LCD Monitor (P/N 110624) $ 5,500


5.2 Optional Dipole Antennas (4G / LTE)

DESCRIPTION PRICE

3126-2045 Precision Sleeve Dipole Supports LTE Bands 1, 4 (requires 3126-1850), 10 (requires 3126-1850), 15 (also requires 3126-2600), 16 (requires 3126-2600), and 34

$ 4,995

3126-1850 Precision Sleeve Dipole (included w/ Cellular Test Package) Supports LTE Bands 2, 3, 4 (requires 3126-2045), 9, 10 (requires 3126-2045), 25, 33, 35, 37, and 39

$ 4,100

3126-800 Precision Sleeve Dipole (included w/ Cellular Test Package) Supports LTE Bands 5, 6, 18, 19, and 20

$ 4,100

3126-2600 Precision Sleeve Dipole (included w/ TD-SCDMA Test Package) Supports LTE Bands 7, 15 (requires 3126-2045), 16 (requires 3126-2045), 38, and 41

$ 4,995

3126-900 Precision Sleeve Dipole Supports LTE Band 8

$ 4,100

3126-1550 Precision Sleeve Dipole Supports LTE Bands 11, 21, and 24

$ 4,100

3126-700 Precision Sleeve Dipole Supports LTE Bands 12, 13, 14, and 17

$ 4,100

3126-3600 Precision Sleeve Dipole Supports LTE Bands 22, 42, and 43

$ 5,500


$ 4,995


$ 4,995


5.3 Software Maintenance Options

The EMQuest™ software license provided with the AMS-8050 is for a single PC installation of EMQuest™ EMQ-100 Antenna Measurement Software. The initial license is valid for a period of one (1) year in accordance with the license terms and conditions. Annual (12 month) maintenance and support for the software license, including any software options that have been purchased, is available at an additional cost. Buyers of the AMS-8050 system may elect to extend their software maintenance and support to a full 24 or 36 months at an additional cost. Prices for upgrades to 24 or 36 months are shown below. During the term of an Annual Maintenance Agreement, ETS-Lindgren will provide the following: Software upgrades for product version updates, as they become available Service packs (software patches), as they become available Customer assistance including topics such as general usage of the software product.

Assistance is also provided for identifying, verifying and resolving problems in the software product that cause the software product to fail to operate as described in the program documentation

Updates to the software product reference manuals and application notes, technical notes and other related product information

Notification of the availability of upgrades and new release versions

DESCRIPTION PRICE

EMQuest Software License Maintenance

24 months of maintenance and support for one (1) EMQuest™ EMQ-100 Antenna Measurement Software license

$ 9,975

24 months of maintenance and support for each EMQuest™ optional driver (e.g. part number 397xxx)

$ 1,025

36 months of maintenance and support for one (1) EMQuest™ EMQ-100 Antenna Measurement Software license

$ 14,175

36 months of maintenance and support for each EMQuest™ optional driver (e.g. part number 397xxx)

$ 1,540


5.4 Extended Service Plan Option

The Extended Service Plan will be administered by the ETS-Lindgren Service Department, located in Cedar Park, Texas. This office will coordinate service activities and provides for out-of-warranty services on designated components to be performed at the location we designate. The Customer will prepay inbound shipping costs to the ETS-Lindgren service facility responsible for the repair. We will pay outbound shipping cost for a carrier of our choice, exclusive of any duties or taxes. Due to the complexity of the systems installed as part of the AMS-8050, you may request Extended Service Plan repairs to be performed at your location (but it is our option to do so). If we determine that requested service could only be performed at your location, you will not be charged for our travel related costs during the period of the Extended Service Plan coverage dates. Exclusions to the Extended Service Plan are as follows: Normal wear and tear of materials Damage due to water, dust, fire, external contaminants Consumable items such as fuses, batteries, etc. Products that have been improperly installed, maintained or used Products which have been operated outside the specifications Products which have been modified without authorization Calibration of products, unless necessitated by defects SAM Phantom Head

DESCRIPTION PRICE

Extended Service Plan Pricing at the Time of Original Order Option 1 – One-year Extended Service Plan $ 10,900

Option 2 – Two-year Extended Service Plan $ 19,980

Option 3 – Three-year Extended Service Plan $ 29,970

Note: Extended Service Plans (ESP) are effective following the original factory warranty. ESP must be purchased at the time of the original order.


5.5 Onsite Assembly Options

DESCRIPTION PRICE

Two-Piece Assembly (Option 1) $ 5,000

1. Unit delivered at Customer location in one piece and one crate 2. Crate cannot be stored outside; they must be stored in an environmentally-controlled

area in order to maintain the integrity of the unit. Failure to do this may result in damage to internal components

3. Price assumes Customer is able to unload the crate. The unloading approach requires a raised loading dock and forklift with minimum 6’ extensions to safely unload the crate

4. ETS-Lindgren staff travels to Customer workplace to complete assembly 5. After uncrating, ETS-Lindgren staff unbolt unit into two sub-assemblies (drive cart and

system cart) Note: The drive cart is the largest piece and measures approx. 60” L x 60” W x 76” H

6. ETS-Lindgren staff will roll both carts from Customer loading dock area to final assembly site. The dimensions of the hallways must be ≥ 120” (3.1m) wide and the doorways must ≥ 72” (1.8m) wide x 84” tall

7. Once at final assembly site, ETS-Lindgren staff re-assemble the carts into final configuration and perform final set-up and calibration with Customer

8. Estimated onsite assembly time is two (2) days

Full Unit Assembly (Option 2) $ 10,000

1. Unit delivered at Customer location in various pieces and multiple crates Note: Crates will weigh between 300 and 1,000 lbs. with dimensions up to 60” L x 60” W x 48” H

2. Crates cannot be stored outside; they must be stored in an environmentally-controlled area in order to maintain the integrity of the unit. Failure to do this may result in damage to internal components

3. Price assumes Customer is able to unload the crate. The unloading approach requires a raised loading dock and forklift with minimum 6’ extensions to safely unload the crate

4. ETS-Lindgren staff travels to Customer workplace to complete assembly 5. After uncrating, ETS-Lindgren staff transports the various components to the final

assembly site. Note: Customer-supplied panel carts are preferred for transporting various components to final assembly site. This will simplify and speed up the transport effort. Note: All openings (doors and elevators) and hallways must by ≥ 36” wide

6. ETS-Lindgren staff moves and assembles all components into final configuration and completes final set-up and calibration with Customer Note: Adhesives must be used in the final assembly site during the assembly process. Odors require Customer and ETS-Lindgren to coordinate assembly schedule so that no employees are exposed to adhesive odors while curing; estimated cure time is between 4 to 8 hours.

7. Estimated onsite assembly time is three (3) days

Payment Terms & Delivery 19 of 24 AMS-8050 Antenna Measurement System

6. PAYMENT TERMS & DELIVERY

Upon receipt and acceptance of a purchase order, a down payment amounting to 25% of the Total Price is required. Remaining billable line items will consist of the following milestone events: 1) Shipment of the AMS-8050 2) Setup & Calibration 3) Orientation / Training Upon receipt and acceptance of a Purchase Order, ETS-Lindgren will provide Order Verification, outlining exactly what has been purchased and the values of each of the milestone events listed above. All payments, excluding the down payment, are due thirty (30) days from the date of invoice. At any time, ETS-Lindgren may change these credit terms based upon buyer’s financial condition. A written Purchase Order must be received, reviewed and accepted by ETS-Lindgren Inc. before commencement of any work related to this proposal. Purchase Orders can be mailed to ETS-Lindgren Inc., 1301 Arrow Point Drive, Cedar Park, TX 78613, faxed to the ETS-Lindgren Inc. Proposals Department at (512) 531-6500 or emailed to [email protected]. 6.1 Remittance Information

Payment by Check (Mail)

ETS-Lindgren Inc. P. O. Box 841147 Kansas City, MO 64184-1147

Payment by Check (Overnight Courier)

Commerce Bank 811 Main KC LBX - 841147 Kansas City, MO 64105 Phone: 1-800-207-0886

Payment by Wire Transfer (US Dollars)

Bank: Commerce Bank ABA: 101000019 Account: 208012547 Account Name: ETS-Lindgren Inc.

6.2 Price Validity Sixty (60) days from the date of this proposal

6.3 Standard Shipping Terms Ex Works (INCOTERMS 2000) Factories Antenna Measurement System from Cedar Park, Texas

6.4 Estimated Delivery Schedule Eight (8) to Ten (10) weeks (excluding holidays) after receipt and acceptance of a purchase order

Payment Terms & Delivery 20 of 24 AMS-8050 Antenna Measurement System

6.5 Additional Clarifications Proposal does not include design reviews at the Client’s location or as-built drawings. Pricing is based on utilizing ETS-Lindgren non-union labor (open shop) onsite. Price excludes any applicable sales taxes, freight, performance bonds, permits or fees relating

to permits, plan checks, customs or other fees unless stated otherwise. The proposed equipment does not include ISO 17025 calibration. If Client intends to seek

accreditation, this calibration can be added at an additional cost. ETS-Lindgren Inc. shall not be obligated to accept or proceed under any proposed contract

resulting from this proposal prior to review and full acceptance of terms and conditions, if such terms and conditions were not provided with a Request for Proposal (RFP).

This proposal represents ETS-Lindgren’s current design concept for the contemplated effort. ETS-Lindgren reserves the right to 1) change design concepts to utilize the most current technology available at the time of design finalization and 2) to substitute components or parts that are equivalent or better in performance to those specified in this offer.

This proposal, as drafted is all-inclusive. No prior verbal or written agreements are to be assumed included in this proposal unless identified in writing and incorporated by reference.

ETS-Lindgren reserves the right to publicize information about the completed chamber when no non-disclosure agreement (NDA) is in place.

Terms and Conditions 21 of 24 AMS-8050 Antenna Measurement System

7. TERMS AND CONDITIONS 1) Definitions: “Products” means all materials, goods, or work to be provided to Buyer by Seller, regardless of type

(including chambers and shielding). “Seller” means ETS-LINDGREN INC., an Illinois corporation, or its affiliated entity by or through which the Products are sold to Buyer. “Buyer” means the person or company purchasing Seller’s Products. “Contract” means the document or documents together constituting the contract between Seller and Buyer for the sale, purchase and installation of the Products, and includes these Terms and Conditions.

2) Applicability: These Terms and Conditions apply to all sales of Products by Seller. Buyer's order shall be deemed to incorporate, without exception, all the terms and conditions hereof notwithstanding any order form of Buyer containing additional or contrary terms or conditions. Although Buyer may submit purchase orders or other documents on Buyer’s forms, Buyer expressly agrees that Seller’s acceptance of such forms is solely for Buyer’s convenience and that any different or additional terms or conditions set forth on any purchase order or other document submitted by Buyer shall not apply and shall be void and of no effect. No acknowledgment by Seller of, or reference by Seller to, or performance by Seller under, any purchase order or other document of Buyer shall be deemed an acceptance by Seller of any term or condition which is additional to or different from these Terms and Conditions unless such additional or differing term or condition is set forth in a document generated by Seller or expressly agreed to by Seller in writing. In no event will Seller accept or be deemed to accept any conditions or requirements that are in violation of the U.S. restrictive trade practices or antiboycott laws or regulations.

3) Taxes: The prices stated herein are in U.S. Dollars and do not include any federal, state, or local sales, use, excise, gross receipts, import, export, transport, value-added or other taxes unless so stated specifically in writing. Any applicable exemptions to the above taxes must be made available to Seller prior to invoicing or such taxes will be charged for the state of destination. Any exemption certificates must correlate with the state of destination. Such taxes will be added to invoice prices in those instances in which Seller is required to collect them from Buyer; provided, however, that if Seller does not collect any such taxes and is later asked by or required to pay such to any taxing authority, Buyer will make such payment to Seller or, if requested by Seller, directly to such taxing authority.

4) Price Adjustments: At Seller's option, prices may be adjusted to reflect any increase in Seller’s costs resulting from state, federal or local legislation, or any change in the rate charge or classification of any carrier. Notwithstanding the prices agreed upon, if prior to delivery, Seller’s costs for copper, aluminum, ferrites, and/or steel (the “Primary Material Components”) increase more than 10% as compared to the prices of such Primary Material Components as of the Contract date, Seller may pass on any such cost increases in excess of 10% to Buyer, provided that Seller notifies Buyer in advance of such price increases. Buyer acknowledges that the Primary Material Components represent approximately 20% of the price of the Products. In the event Buyer delays or causes the delay of shipment of any Products, the price for such Products shall be subject to increase to reflect the Seller's prices in effect for such Products at the time of the delayed delivery and to reflect Seller's increased costs resulting from such delay.

5) Payment Terms: Unless otherwise specified by Seller in the Contract, Products shall be invoiced as of the date of shipment, and payment shall be due net 30 days. Seller may, in additional to any other remedy available under applicable law, charge Buyer interest on any amounts not paid when due at a rate equal to the lesser of one and one-half percent (1½%) per month or the maximum interest rate allowable under applicable law, and Buyer shall be responsible and liable for all expenses incurred by Seller in collection, including reasonable attorneys' fees.

6) Buyer's Financial Responsibility; Rights of Seller: Notwithstanding stated payment terms, if Seller shall at any time doubt Buyer's financial responsibility, Seller may demand adequate assurance of due performance or decline to make any further shipments except upon receipt of cash payment in advance or security. If Seller demands adequate assurance of due performance and the same is not forthcoming within 10 days after the date of Seller's demand, Seller may, at its option, (i) continue to defer further shipments under this order and/or any other order from Buyer which has been accepted by Seller until adequate assurance is received, or (ii) cancel this order and/or any other orders from Buyer which have been accepted by Seller and recover damages. If Buyer fails in any way to fulfill these Terms and Conditions or any other provision of the Contract, Seller may defer further shipments until such default is corrected or cancel the order and recover damages.

7) Security Interest: Buyer hereby grants Seller a security interest in the Products, and all proceeds thereof and accessions thereto, to secure payment of the purchase price for the Products and all other charges and costs for which Buyer is responsible hereunder. At Seller's direction, Buyer shall, from time to time, do all acts necessary or reasonable to protect Seller's security interest herein created and Buyer shall execute and deliver to Seller all Uniform Commercial Code Financing Statements which Seller may deem necessary to protect its rights and interests as set forth herein. Buyer hereby irrevocably constitutes and appoints Seller as its true and lawful attorney-in-fact, in its name, place and stead, to execute, deliver, acknowledge, file or record any and all such Uniform Commercial Code Financing and Continuation Statements. The grant of the foregoing power of attorney is coupled with an interest and shall not be revocable by Buyer until all payments due hereunder (including deferred payments whether evidenced by notes or otherwise) shall have been made in cash. Seller shall have the remedies of a secured party under the Uniform Commercial Code in force in the State of Texas.

8) Delivery Dates; Shipment Terms: All delivery dates are approximate, and Seller shall not be responsible for any damages of any kind resulting from any delay. If shipment terms are specified with reference to Incoterms 2010 (or any earlier version) the parties’ responsibilities shall be determined in accordance with such Incoterms except to the extent the parties may otherwise agree. Otherwise, except to the extent the parties may otherwise agree, (a) Seller may choose the carrier and means of delivery and arrange for transportation and insurance; (b) all transportation and


insurance costs will be paid by Buyer; (c) title to the Products and risk of loss or damage thereto shall pass to Buyer upon tender to the carrier at Seller’s factory or warehouse, provided that if delivery is made by Seller's vehicles title and risk of loss or damage shall pass to Buyer upon delivery to Buyer's premises; (d) Buyer may choose the freight forwarder and customs broker, subject to Seller’s disapproval; and (e) Buyer shall be responsible for filing all claims with the carrier. No deferment of shipment at Buyer's request will be made except on terms that indemnify Seller against all loss and additional expense, including but not limited to handling, storage and insurance charges.

9) Export: If the Products are to be exported, this order is subject to Seller's ability to obtain export licenses and other necessary papers within a reasonable period. Buyer will be responsible for all export and import charges and consular and customs declarations and will be responsible for penalties resulting from errors or omissions thereon. Buyer agrees that it shall not re-export the Products or any goods or items which incorporate the Products if the re-export would violate United States export laws or the laws of any other country from which they are re-exported.

10) Warranty: Seller warrants the Products as set forth in its Limited Product Warranty applicable to such Products in effect at the time of sale, which is incorporated into these Terms and Conditions and which, if not attached to the Contract documents, is available separately upon request. Buyer agrees that Seller may revise its form of warranty from time to time after the Contract date by providing a copy of the revised warranty to Buyer or by posting it on Seller’s website.

11) Claims: Buyer shall promptly inspect all Products upon delivery. No claims for shortages will be allowed unless shortages are reported to Seller, in writing, within 10 days after delivery. No other claims against Seller will be allowed unless asserted in writing within 30 days after delivery (or assembly if the Products are to be assembled by Seller) or, in the case of an alleged breach of warranty, within the warranty period as defined in the applicable Limited Product Warranty.

12) LIMITATION OF LIABILITY: IN NO EVENT SHALL SELLER BE LIABLE TO BUYER FOR ANY SPECIAL, INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF, OR AS THE RESULT OF, THE SALE, DELIVERY, NON-DELIVERY, SERVICING, ASSEMBLY, USE, LOSS OF USE OR FAILURE OF THE PRODUCTS OR ANY PART THEREOF, OR FOR ANY CHARGES OR EXPENSES OF ANY NATURE INCURRED WITHOUT SELLER'S PRIOR WRITTEN CONSENT, EVEN IF SELLER MAY HAVE BEEN NEGLIGENT. IN NO EVENT SHALL SELLER'S LIABILITY UNDER ANY CLAIM MADE BY BUYER EXCEED THE PURCHASE PRICE OF THE PRODUCTS IN RESPECT OF WHICH DAMAGES ARE CLAIMED.

13) Excuse of Performance: Seller shall not be liable for any default or delay in performance caused, directly or indirectly, by acts of God; war, terrorism, sabotage, riot, insurrection or civil commotion; force of arms; fire, flood, severe weather, or natural disaster; strikes, labor disputes, picketing or other labor controversies; explosion; accidents; any governmental action, prohibition or regulation; delay or unavailability of transportation facilities; shortage or breakdown of or inability to obtain or non-arrival of any labor, material or equipment used in the manufacture of the Products; failure of any party to perform any contract with Seller relative to the production of the Products; or from any other cause which is beyond Seller's control, whether or not such cause be similar or dissimilar to those enumerated. In the event of delay in performance due to any such cause, the date of delivery or time for completion will be extended by a period of time reasonably necessary to overcome the effect of such delay.

14) Loss to Buyer's Property; Patent, Trademark, or Copyright Infringement: Seller shall not be liable for, and shall have no duty to provide insurance against, any damage or loss to any goods or materials of Buyer which are used by Seller in connection with this order. Where any Product is manufactured from patterns, plans, drawings, or specifications furnished by Buyer, Buyer shall defend, indemnify Seller against, and save Seller harmless from, all loss, damage, and expense arising out of any suit or claim against Seller for infringement of any patent, trademark, or copyright because of Seller's manufacture of such Product or because of the use or sale of such Product by any person. Upon Seller's request, Buyer shall, at Buyer's sole cost and expense, retain counsel reasonably acceptable to Seller to appear on Seller's behalf and assume the defense of any litigation arising out of any such claim.

15) Seller's Specifications, Technical Data: Any specifications, drawings, plans, notes, instructions, engineering notices, or technical data of Seller furnished to Buyer shall be deemed to be incorporated herein by reference the same as if fully set forth. Seller shall at all times retain title to all such documents, and Buyer agrees to keep such information and documents in confidence and not to disclose such to any party other than Seller or a party duly authorized by Seller.

16) Site Conditions: Buyer shall be responsible for the structural integrity and the clean, asbestos-free and safe status of the work area and structure in which Seller will perform any services and deliver or install any Products. Some installation may involve welding or the use of materials, in which case Buyer shall provide adequate ventilation and assure that the project area is free and clear of debris, dirt and obstruction. Buyer shall provide at its expense, temporary lighting and power for the operation of hand tools and welding equipment, if necessary, and an accessible dumpster for the disposal of debris. Seller shall clean up any materials, debris or obstructions created by Seller. Installation of the Products by Seller is based upon Seller's access close to the site and the perimeter of the project site, together with an adequate amount of weather-tight storage space on the project site. If Buyer is not ready to accept delivery of the Products on the date the Products are to be ready, Buyer shall give Seller sufficient notice of a local point where delivery will be accepted, or the material may be stored, within or without the Seller's factory at Buyer's risk and expense. Buyer shall reimburse Seller for all costs incurred due to extra handling and storage. Any such delay in acceptance shall not delay any agreed-to invoicing or payment schedule.

17) Cancellations: After acceptance by Seller, orders shall not be subject to cancellation by Buyer, and Products may not be returned by Buyer, except with Seller's written consent (and at Seller's sole and absolute discretion) and upon


terms that will indemnify Seller against all direct, incidental and consequential loss or damage including but not limited to: direct costs; overhead and other costs which are allocable or apportionable under reasonable accounting practices to the order; storage fees; handling and transportation costs; material or personnel expenses of Seller; and lost profits.

18) Limitation on Assignment: Neither party may assign any of its rights or obligations hereunder without the prior written consent of the other except that Seller shall have the right without Buyer’s consent to (a) subcontract any portion of its obligations to any party, or (b) assign all its rights and obligations to any entity with which it is affiliated, into which it shall be merged, with which it shall be consolidated, or by which it, or all or substantially all of its assets, shall be acquired.

19) Product Notices and Instructions: Buyer shall provide all users of the Products (including its employees) with all Seller supplied product notices, warnings, instructions, recommendations, and similar materials, and shall indemnify Seller against any loss or damages (including attorneys’ fees) incurred or suffered by Seller as a result of such failure.

20) Equal Opportunity Clause: This Section applies only in the event that the Products are to be used in whole or in part for the performance of government contracts and where the dollar value of said Products exceeds, or may in any one year exceed, $10,000: a) In connection with the performance of work under this Contract, Seller agrees not to discriminate against any employee or applicant for employment because of race, color, religion, sex, or national origin. The aforesaid provision shall include, but not be limited to, the following: Employment, upgrading, demotion, or transfer; recruitment or recruitment advertising, layoff or termination; rates of pay or other forms of compensation; and selection for training, including apprenticeship. Seller agrees to post hereafter in conspicuous places, available for employees and applicants for employment, notices to be provided by the contracting officer setting forth the provisions of this nondiscrimination clause. The provisions of the Equal Opportunity Clause, as promulgated by Executive Order 11246 dated September 24, 1965, as amended, are incorporated herein by reference. b) The following provisions regarding equal opportunity, and all applicable laws, rules, regulations, and executive orders specifically related thereto, including applicable provisions from the Federal Acquisition Regulations, and supplements thereto, are applicable hereto, to the extent that the minimum monetary amounts under such regulations have been satisfied: 41 CFR 60-1.4, Equal opportunity clause; 41 CFR 60-1.7, Reports and other required information; 41 CFR 60-1.8, Segregated facilities; 41 CFR 60-250.4, Affirmative action clause (Affirmative Action for Disabled Veterans and Veterans of the Vietnam Era); 41 CFR 60-741.4, Affirmative action clause (Affirmative Action for Handicapped Workers).

21) Other Rights or Remedies: Except as otherwise provided herein, any rights or remedies granted hereunder to either party shall be in addition to, and not in lieu of, any other rights or remedies of such party at law or in equity.

22) Severability: In the event that any provision hereof shall violate any applicable statute, ordinance, or rule of law, such provision shall be ineffective to the extent of such violation without invalidating any other provision hereof.

23) Electronic Signatures: The Contract documents and any amendment, waiver or notice related thereto may be executed in counterparts and may be executed and delivered solely by electronic means, including but not limited to facsimile or electronic mail (e.g. in PDF format), and when so executed and delivered shall be valid whether or not followed by the delivery of manually signed originals.

24) Governing Law; Arbitration; Venue: The rights and remedies of the parties under these Terms and Conditions or otherwise with respect to the Contract or the Products shall be governed by and construed in accordance with the laws of the State of Texas (without regard to principles of conflicts of laws). Any dispute arising under these Terms and Conditions or otherwise with respect to the Contract or the Products shall be settled in Travis County, Texas by arbitration in accordance with the Commercial Arbitration Rules of the American Arbitration Association. Judgment upon the award rendered by the Arbitrator may be entered in either the District Courts for Travis County, Texas or the Federal District Court for the Western District of Texas. The parties hereby agree that the sole proper jurisdiction and venue for any disputes not subject to arbitration hereunder shall be either the District Courts for Travis County, Texas or the Federal District Court for the Western District of Texas. Buyer hereby consents to such venue and to the personal jurisdiction of such courts and hereby waives the right to demand a jury trial in any such action. For such purpose, Buyer, if not located in the State of Texas, irrevocably appoints the Secretary of State of Texas as its agent for receipt of service of process or notices. Any arbitration or other action based upon breach of the Contract or upon any other claim arising out of this sale (other than an action by Seller for any amount due to Seller by Buyer) must be commenced within one year from the date of the tender of delivery by Seller or, in the case of a cause of action based upon an alleged breach of warranty, within the period of time specified in the applicable Limited Product Warranty.

25) Legal Fees: In the event of any litigation or other proceeding arising herefrom, Seller shall be entitled to recover from Buyer all reasonable attorneys' fees, costs and expenses incurred by Seller in enforcing any of Seller's other rights hereunder.

26) Waiver: Waiver by Seller of any default or breach of these Terms and Conditions or the other Contract documents shall not be construed as a waiver of any other or continuing breach; and failure to exercise any right arising from any default or breach shall not be deemed a waiver of such right, which may be exercised at any subsequent time.

Warranty Policy 24 of 24 AMS-8050 Antenna Measurement System

8. WARRANTY POLICY FOR RF SHIELDED ANECHOIC CHAMBERS

SCOPE AND DURATION ETS-Lindgren Inc. (“Seller”) warrants to the purchaser (“Buyer”) of its Products (as described in the applicable Contract for sale of the Products to Buyer) that the Products (1) will be free from defects in materials and workmanship, and (2) will conform to Seller’s applicable product descriptions and specifications, if any, contained in or attached to Seller’s Quotation or Proposal. If no product descriptions or specifications are contained in or attached to the Quotation or Proposal, Seller’s standard descriptions and specifications for such Products in effect on the date of shipment shall apply. If a Product involves testing, the criteria for all testing shall be Seller’s applicable product specifications utilizing factory-specified calibration and test procedures and instruments. Seller also warrants to Buyer that title to the products will be delivered free of any and all claims, demands, liens or encumbrances. All product warranties, except the warranty of title, and all remedies for breach of warranty are limited in time as shown in the table below. Anechoic Chamber Performance 5 Years Antennas 2 Years Cables & Connectors 1 Year CCTV 2 Years Custom Equipment 1 Year Doors & Accessories 1 Year Field Probes 3 Years Filters 5 Years Positioning Equipment 2 Years Telescoping Sprinkler Assemblies 1 Year Any product or component part furnished to Buyer during the warranty period to remedy a breach of warranty shall be warranted only to the extent of the unexpired term of the warranty applicable to the repaired or replaced product. The warranty period shall commence on the date the product is delivered to Buyer; however, if Seller assembles the product, or provides technical direction of such assembly, or if the product is a component of a larger product or system, then the warranty period for such product shall commence on the date the assembly of the product or system is complete. Notwithstanding the foregoing, in the event that the assembly is delayed for a total of thirty (30) days or more from the date of delivery for any reason or reasons for which Seller is not responsible, the warranty period for such product may, at Seller’s option, commence on the thirtieth (30th) day from the date such product is delivered to Buyer. CLAIMS No claim for breach of warranty will be allowed unless asserted in writing promptly after discovery of the breach, and in any event within the applicable warranty period. No warranty claim will be allowed unless and until Buyer has paid in full all charges then owing to Seller. EXCLUSIONS The foregoing warranties are exclusive and in lieu of all other warranties, whether written, oral, express, implied, or statutory. EXCEPT AS EXPRESSLY STATED ABOVE, SELLER MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE OR USE, WITH RESPECT TO THE PRODUCTS, OR ANY PARTS OR LABOR FURNISHED DURING THE SALE, DELIVERY OR SERVICING OF THE PRODUCTS. Seller’s warranty does not cover any defect or performance deficiency (including failure to conform to product descriptions or specifications) which results, in whole or in part, from (1) storage or handling of the product by Buyer, its employees, agents, or contractors which is negligent or is not in accordance with Seller’s instructions or recommendations, (2) failure of Buyer to prepare the site and to provide an operating environmental condition in compliance with any applicable instructions or recommendations of Seller, (3) absence of any product, component, or accessory recommended by Seller but omitted at Buyer’s direction, (4) any design, specification, or instruction furnished by Buyer, its employees, agents or contractors and not expressly agreed to in writing by Seller, (5) any alteration of the product by persons other than Seller, (6) combining Seller’s product with any product furnished by others, (7) combining incompatible products of Seller, (8) interference with the radio frequency fields due to conditions or causes outside the product as furnished by Seller, (9) improper or extraordinary use of the product,

or failure any alteration of the product by persons other than Seller, (6) combining Seller’s product with any product furnished by others, (7) combining incompatible products of Seller, (8) interference to comply with Seller’s operating instructions or recommendations, or (10) acts of God, acts of civil or military authority, fires, floods, strikes or other labor disturbances, war, riot, or any other causes beyond the reasonable control of Seller. This warranty does not cover (A) contact fingers or replacements unless loss is caused by a defect in material or manufacturing workmanship otherwise within the scope of this warranty, or (B) removal and reconstruction of walls, partitions, ceilings and other facility costs arising from repair or replacement of the product or parts thereof by Seller under the warranty. Seller does not warrant products of others which are not included in Seller’s published price lists for shielding products and systems supplies and accessories. BUYER’S REMEDIES Seller’s sole liability for any breach of warranty shall be, at Seller’s option, to repair or replace, or to refund the purchase price of, the defective or nonconforming product or part or parts thereof. Warranty service during the applicable warranty period will be performed without charge to Buyer only within the contiguous 48 United States during Seller’s normal business hours. Subject to the availability of personnel, after-hours service is available upon request at an additional charge. For service outside the contiguous 48 United States, travel and per diem expenses, when required, shall be the responsibility of the Buyer. Any services performed after the warranty period will be at Seller’s prevailing service rates. The remedies set forth herein are conditioned upon Buyer promptly notifying Seller within the applicable warranty period of any defect or nonconformance and making the product available for correction. Written authorization must be obtained from Seller prior to the return of any product for any reason, including for repair, replacement or credit. Buyer must pay all freight charges for the return of any product as well as for shipment of any replacement product to Buyer. The preceding paragraphs set forth Buyer’s exclusive remedies and Seller’s sole liability for claims based on failure of the products to meet any warranty, whether the claim is in contract, warranty, tort (including negligence and strict liability) or otherwise, and however instituted, and, upon the expiration of the applicable warranty period, all such liability shall terminate. IN NO EVENT SHALL SELLER BE LIABLE TO BUYER FOR ANY SPECIAL, INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES OF ANY KIND ARISING OUT OF, OR AS A RESULT OF, THE SALE, DELIVERY, NON-DELIVERY, SERVICING, ASSEMBLING, USE OR LOSS OF USE OF THE PRODUCTS OR ANY PART THEREOF, OR FOR ANY CHARGES OR EXPENSES OF ANY NATURE INCURRED WITHOUT SELLER’S WRITTEN CONSENT DESPITE ANY NEGLIGENCE ON BEHALF OF THE SELLER AND REGARDLESS OF WHETHER SUCH DAMAGES ARE FORESEEABLE. IN NO EVENT SHALL THE TOTAL AMOUNT OF SELLER’S LIABILITIES UNDER THIS WARRANTY AND ANY OTHER CLAIM BY BUYER EXCEED THE PURCHASE PRICE OF THE PRODUCT IN RESPECT OF WHICH DAMAGES ARE CLAIMED. BUYER UNDERSTANDS AND ACKNOWLEDGES THAT THE FOREGOING EXCLUSIONS AND LIMITATIONS ARE AN ESSENTIAL BASIS OF SELLER’S BARGAIN WITHOUT WHICH SELLER WOULD NOT BE WILLING TO MAKE THE PRODUCTS AVAILABLE TO BUYER. All matters relating to Seller’s warranties shall be construed in accordance with laws of the State of Texas. In the event that any provision hereof shall violate any applicable statute, ordinance, or rule of law, such provision shall be ineffective to the extent of such violation without invalidating any other provision hereof. Any controversy or claim arising out of or relating to Seller’s warranties shall be settled in Austin, Texas by arbitration in accordance with the Commercial Arbitration Rules of the American Arbitration Association. Any such arbitration proceeding must be commenced within one year after the date on which the defect was or should have been discovered by Buyer, but in no event later than one year after the end of the warranty period. Judgment upon the award rendered by the Arbitrator may be entered in either the District Courts for Travis County, Texas or the Federal District Court for the Western District of Texas, In the event any dispute arises hereunder which is not subject to arbitration, such courts shall be the sole proper jurisdiction and venue for such dispute. Buyer hereby consents to such venue and to the personal jurisdiction of such court and hereby waives the right to demand a jury trial in any such action.

ETS-Lindgren - AMS-8050 Antenna Measurement System - NIT Pune

Documents

Transcript of ETS-Lindgren - AMS-8050 Antenna Measurement System - NIT Pune