ETS 601, Piping Classes

7/25/2019 ETS 601, Piping Classes

http://slidepdf.com/reader/full/ets-601-piping-classes 1/17

STANLOW

SHELL HAVEN ENGINEERING TECHNICAL SPECIFICATION DOC: No. ETS 601

Title :

STANLOW and SHELL HAVEN PIPING

CLASSES

of 17 REV G

AMD 1

STANLOW AND SHELL HAVEN Piping Classes

REV AMD DESCRIPTION DATE APPROVED BY SIGN.

G STANLOW AND SHELL HAVENPIPING CLASSES, GENERATED AND FROM SGSI REFINING ANDCHEMICALS PIPING CLASSES(R&C) AND MODIFIED TO REFLECTSTANLOW AND SHELL HAVENPREFERRED PRACTICE

Dec 2002

G AMD1

Liners removed from all S.S.classes. Amended conversion list for

S1303.0, G011372, G011373,G063250 Archived Piping class referenceincluded for; S1218.0, S1402.0,1501.0,1803.0, S1810.0, 1812.0,S3218.0, S6137.0.GRE class GO17012 Added.Service Index updated.Gasket MESC No’s amended inG031172, G031260 & G031271

Sept 2003

CUSTODIAN : PRJ/42/01 John Kokott

WRITTEN BY : PRJ/42/01

CHECKED : PRJ/40/00

APPROVED BY : PRJ/00/01 OME/00/06 CME/00/01

DISTRIBUTION : ‘Engineering Technical Specifications’ Folder - SITE ‘S’ DRIVE & ETS web



STANLOW


Title :


CLASSES

of 17 REV G

AMD 1

ETS 601 REVISION HISTORY

DATEREV. AMDNO.

Document Revision Log SIGN.

Dec 90 OOriginal issue M GE/00/01

Aug 91 ARevision of pages 1 to 10 M GE/00/01

Nov 91 B Revision of pages 1,2,9,10,11,12,13,14,15 & 16M GE/00/01

May 92 C Revision of pages 1 to 19

M GE/00/01

Dec 92 C AMD1

Revision of pages 2,13 & 14 M GE/00/01

July 93 D Revision of pages 2,12 to 26M GE/00/01

July 94 ERevision of pages 1 to 14 M GE/00/01

June 95F Revision of pages 1 to 20 M GE/00/01

May 96F

AMD1Lower temp. limit increased from –20 Deg C In ASTM A106-B

Carbon Steel ClassesM GE/00/01

Mar 99F

AMD2Low Stress spiral wound gaskets replaced by Tanged insert gaskets in150# Classes.

M GE/00/01

Dec 02 G

STANLOW AND SHELL HAVEN Piping Classes generated andrationalised from SGSIRefining and Chemicals Piping Classes (R & C Piping Classes)

P R J /00/01

O M E/00/06

CM E/00/01

Sept 03G

AMD1

Liners removed from all S.S. classes. Amended conversion list for S1303.0, G011372, G011373, G063250 Archived Piping class reference included for; S1218.0, S1402.0,1501.0,1803.0, S1810.0, 1812.0, S3218.0, S6137.0.

GRE class GO17012 Added.Service Index updated.Gasket MESC No’s amended inG031172, G031260 & G031271

P R J /00/01

O M E/00/06

CM E/00/01



STANLOW


Title :


CLASSES

of 17 REV G

AMD 1

1. Introduction

This Engineering Technical Specification covers the requirements of the Piping Classes to be usedat Stanlow Manufacturing Complex and Outlying Sites.

2. Scope

This Engineering Technical Specification contains Stanlow Piping Classes, specifying

recommended piping materials to be used for process piping at Stanlow Refinery(all within the property limits as defined in ANSI B.31.3 para 300.1)

It takes precedence to Piping classes – Refining and Chemicals DEP 31.38.01.12.(See Work Instruction PRJ. D.2.10. This sets down guidelines for selection and control of Pipingclasses at Stanlow.) It does not replace Special Piping Classes which have been compiled as part ofStanlow upgrading projects, or PU specific Piping Classes with special material requirements.

The basis of design of the piping classes is given in DEP 31.38.01.10-Gen.

DEP 31.38.01.11- Gen specifies the general requirements for piping systems and includes some

design –related requirement for specific services, e.g. hydrogen fluoride, sulphuric acid, sodiumhydroxide, chlorine.

See Section 6 for Index of Stanlow PU Specific Piping Classes.

See Section 7 for Piping Class Conversion Table (Rev F to Rev G)



STANLOW


Title :


CLASSES

of 17 REV G

AMD 1

3. Service Index

WHERE THE SERVICE IS NOT SPECIFICALLY DEFINED BELOW, AND FOR FINAL SELECTION OF MATERIALS, AMATERIALS ENGINEER SHALL BE CONSULTED

* IN CONJUNCTION WITH ETS 601 REQUIREMENTS AT STANLOWSERVICE RECOMMENDED

REMARKS SEE

NOTE

IN 2.1

MEDIUM PROPERTIESTEMP LIMITS

DEG C

*

PIPING

CLASSES

Acetic acid all concentrations 0 - 100 3031 1

Acetone 0 - 100 1021 1

Acetonitrile 0 - 130 1021 1

ADIP consult materials engineer

Air 0 - 200 1021 1 Air instrument 0 - 190 1021 from compressor to filter reg. Station

80ns and above

1, 18

Air tool 0 - 100 1021 from compressor to filter reg. Station

80ns and above

1, 18

hot Air tool 0 - 100 8011 dipped downstream of filter reg.station 1, 18

galv’d up to and including 50ns

hot

Air instrument 0 - 190 8011 dipped downstream of filter reg.station 1, 18

galv’d up to and including 50ns

Allyl chloride wet 0 - 20 7012 10

Amine - consult materials engineer(MEA.DEA.AD)

Ammonia aqueous 0 - 165 1021

Ammonia gas , dry and wet 0 - 100 1021

Ammonia Anhydrous -50 - 120 1173 4

Aviation alkylate 0 - 120 1021Benzene 45 - 85 1011 1021 1

Benzene 0 - 45 1172

Butane gas 0 - 340 1011

Butane liquid 0 - 40 1021

Butane -50 - 50 1172 4

Butanol 0 - 200 1021 1

Butanol 0 - 40 8081 7012 to prevent product contamination

Butylene gas 0 - 140 1011

Butylene -50 - 100 1172 4

Caustic soda see Sodium hydroxide

Calcium carbonate aqueous 0 - 50 1021

Calcium chloride aqueous 0 - 50 1021

Calcium hydroxide aqueous 0 - 50 1021

Carbon dioxide dry 0 - 350 1011

Carbon dioxide wet 0 - 100 3011 30213031

7010

1, 10

Carbon monoxide consult materials engineer 2

Chlorine gas, dry -35 - 70 1271 4, 5

Chlorine gas, wet 0 - 80 7210 10

Chlorine gas, wet 0 - 200 8160

Chlorine liquid, dry -35 - 70 1271 4, 5

Condensate steam non - aerated 0 - 250 1261

Coolant 60/40% H2O/methanol -50 - 50 1172 4

Diethanol amine dry 0 - 150 1021 1

Diethanol amine water 0 - 150 3021

Diethanol amine 0 - 100 3031 to prevent product contamination 1



STANLOW


Title :


CLASSES

of 17 REV G

AMD 1

Service Index (cont)


* IN CONJUNCTION WITH ETS 601 REQUIREMENTS AT STANLOW SERVICE RECOMMENDED

SEE

MEDIUM PROPERTIESTEMP LIMITS

DEG C

*PIPING

CLASSESREMARKS

NOTE

IN 2.1

Diethylene glycol all concentrations, dry 0 - 150 1021 1

Diethylene glycol 0 - 150 3031 3021 to prevent product contamination

Dimethylketone water 0 - 100 1021 1

Diphenyl propane 0 - 140 3031 3021 final product DPP plant 1

Ethane 0 - 100 1011

Ethane -50 - 150 1172 4

Ethane -90 - 150 3091 4

Ethanol 0 - 100 1021 11011 1

Ethylbenzene 0 - 450 2040 5Cr.0.5Mo material only needed for>330 C, otherwise carbon steel is OK

e.g. Class 11011, 11021

Ethylene 0 - 340 1011

Ethylene -50 - 150 1172 4

Ethylene -140 - 150 3091 4

Ethylene oxide 0 - 50 1300 1

Ethylene oxide C02, water 0 - 150 3100 321/347 material replaces 316L

Ethylene oxide 0 - 200 3100 321/347 material replaces 316L

Foam, fire fighting Concentrate, solution 0 - 50 3031 7102 15NS - 80NS 10

Formic acids all concentrations 0 - 30 3031 7201 10

Fuel gas wet H2S 1120 severity category VERY LOW 3

Fuel gas wet H2S 1120 severity category MODERATE-LOW 3

Fuel oil Sulphur compounds 0 - 330 1011

Gasoil 0 - 200 1011

Gasoline 0 - 100 1021

Heat transfer fluid Dowtherm 0 - 390 1011

Hydrocarbons Non-corrosive 0 - 200 1011 1021 1, 9 ,

12

Hydrocarbons Non-corrosive 0 - 330 1011 9, 12

Hydrocarbons Non-corrosive 0 - 425 2080 9

Hydrocarbons With wet H2S 0 - 200 1011 1012 non sour 9

Hydrocarbons With or without wet H2S -50 - 150 1172 1176 Low temp., non sour 4, 9

Hydrocarbons With wet H2S 0 - 200 1015 1125 high sour 9

Hydrocarbons With S and / or Nap. Acid 0 - 240 1011 10121031

2, 9, 13

Hydrocarbons With S and / or Nap. Acid 240 - 330 1042 corrosion rate must be checked 9, 13, 14

Hydrocarbons With S and/or NA 240 - 450 2040 corrosion rate must be checked

Hydrocarbons With Hydrogen and H2S 230 - 538 3055

Hydrocarbons Naphtenic acid consult materials/corrosion engineer

Hydrocarbons Sulphur compounds consult materials/corrosion engineer

Hydrocarbons LPG propane, butane -50 - 150 1172 4

Hydrocarbons effluent, CO2, H2

Hydrochloric acid 0 - 200 6071 8

Hydrochloric acid conc. < 37% 0 - 80 7200 10

Hydrochloric acid all concentrations 0 - 60 8120

Hydrochloric acid all concentrations 8160

Hydrogen with or without wet H2S 0 - 230 1071 1076 Moderate sour 3, 8

Hydrogen no h2s 230 - 450 2110 2120 Check API 941 for pres./temp. limit 5

Hydrogen with h2s 230 - 538 3055

Hydrogen chloride gas, dry 0 - 100 1011 1012

1021

1

Hydrogen chloride gas, wet 0 - 50 7010 10

Hydrogen fluoride 0 - 200 1310 6080 8,15

Hydrogen peroxide up to 98% consult materials engineer. 8

Hydrogen sulphide gas, dry 0 - 200 1041 consult materials engineer 2

Ional 0 - 100 3031 to prevent product contamination



STANLOW


Title :


CLASSES

of 17 REV G

AMD 1



* IN CONJUNCTION WITH ETS 601 REQUIREMENTS AT STANLOW SERVICE RECOMMENDED

SEE

MEDIUM PROPERTIES TEMP LIMITS

DEG C

* REFINING &

CHEMICALS

PIPING

CLASSES

REMARKS

NOTE

IN

2.1

Isobuytl alcohol finished product 0 - 100 1011 10121021

1

Isobuytl alcohol finished product 0 - 100 8081

Isopentane 0 - 100 1021

Isopropyl alcohol 0 - 100 1021

LPG HC’s, H2S, H2O 1173 consult materials engineer 4

LPG propane, butane gas 0 - 340 1011

LPG propane, butane liquid 0 - 100 1021

LPG propane, butane liquid/gas -50 - 150 1172 4

Luboil 0 - 200 1021

Luboil 3021

Luboil 0 - 150 3031

Methane 0 - 100 1021

Methane -50 - 150 1172 4

Methane -200 - 150 3091 4

Methanol 0 - 100 1011 1012

1021 1

Methanol -50 - 150 1172 4

Methyl ethyl ketone 0 - 100 1011 10121021

1

Methyl mercaptan 0 - 30 1021

Mono ethanol amine finished prduct 0 - 100 3031

Naphtha 0 - 340 1011

Naphthenic acid finished/unfinishedproduct

0 - 95 1021

Naphthenic acid finished/unfinished

product

0 - 200 3031

Nitogen 0 - 340 1011

Nitogen 0 - 200 1021

Nitogen liquid -200 - 150 3091 4

Oxygen 6,8

Pentane 0 - 400 1011

Phenol 0 - 200 1011 1012

1021

1

Phenol 0 - 150 3021 3031

3011

to prevent product contamination 1

Phosphoric acid all concentrations 0 - 50 3031 8

Polyols unfinished neutralproduct

0 - 150 1011 1012,1021

Polyols acidic or alkaline 0 - 200 3021 3031

Polyols finished neutral

product

0 - 80 none ETS 601

S1402.0

Polypropylene granulated 0 - 60 3031

Polypropylene slurry lines 0 - 70 none 3130 full bore ball valves

Polypropylene slurry lines 0 - 70 none 3140 full bore ball valves

Polypropylene powder 0 - 70 4020 LP polyolefine plant

Potassium hydroxide consult materials engineer 8, 15

Propane gas 0 - 340 1011

Propane -50 - 150 1172 4

Propylene -48 - 150 1172 4

Propylene liquid -100 - 150 3091 4

Seal Oil 3021

Secondary butyl alcohol 0 - 200 1011 1012

1021



STANLOW


Title :


CLASSES

of 17 REV G

AMD 1



* IN CONJUNCTION WITH ETS 601 REQUIREMENTS AT STANLOW

SERVICE RECOMMENDED

SEE

MEDIUM PROPERTIES

TEMP LIMITS

DEG C

*REFINING &

CHEMICALS

PIPING

CLASSES

REMARKS NOTE

IN

2.1

Sodium hydroxide Area A-not traced-App.3

0 - 80 1373 for piping req. see appendix10 of DEP 31.38.01.11-

.GEN

16

Sodium hydroxide Area A- traced/

Area B-App.3

80 - 110 1372 for piping req. see appendix

10 of DEP 31.38.01.11-

.GEN

16

Sodium hydroxide Area C-App.3 0 - 150 6021 for piping req. see appendix10 of DEP 31.38.01.11-

.GEN

16

Sodium hypochloride Concentration < 18% 0 - 50 7230 10

Steam saturated/superheated 0 - 400 1261 2080

Steam superheated 400 - 450 2020 2080

Steam superheated 400 - 538 2010 2021

2050

Steam condensate 0 - 200 1261

Sulfinol consult materials engineer

Sulphur dry 0 - 150 10111012

1021

Sulphur trioxide dry gas 0 340 1011

Sulphuric acid >65% wt 0 - 60 1091 for piping req. see appendix

10 of DEP 31.38.01.11-.GEN

17

Sulphuric acid over 65% wt 0 - 150 8160 temp. can be limited by valveselection

17

Toluene 0 - 340 1011

Triethanol amine 0 - 40 1021

Vacuum service 0-20 mbar abs. 0 - 150 none 11150 CS vacuum class withmodified

flanges for ‘O’ rings

Vacuum service 0-20 mbar abs. 0 - 150 none 13110 SS vacuum class withmodified

flanges for ‘O’ rings

Water, boiler feed treated non - corrosive 0 - 250 1261

Water, boiler feed demineralized aerated 0 - 150 3031 3021

3011

1

Water, boiler feed 0 - 90 7011 10

Water, boiler feed 0 - 75 8040

Water, cooling fresh 0 - 60 1201

Water, cooling fresh 0 - 50 7320 GRE 10hot

Water, cooling brackish 8011 dipped

galv’d

supply and return ,50NS and

smaller

18

Water, cooling brackish -5 - 60 7320 GRE underground 18 ,10

Water, cooling brackish 1011 above and underground 18

Water, demineralized 0 - 80 3021 3031

3011

Water, demineralized 0 - 80 7012 10

Water,

potable/domestic

0 - 40 7012 For above ground systems

only

10

Water,

potable/domestic

0 - 40 7015 For underground systems

only

10



STANLOW


Title :


CLASSES

of 17 REV G

AMD 1



* IN CONJUNCTION WITH ETS 601 REQUIREMENTS AT STANLOW

SERVICE RECOMMENDED

SEE

MEDIUM PROPERTIESTEMP

LIMITS DEG C

*REFINING &

CHEMICALS

PIPING

CLASSES

REMARKS

NOTE

IN 2.1

Water, fire fighting fresh 0 - 50 1201 above and underground 18

Water, fire fighting fresh hot

spray systems 0 - 200 8081 dipped up to & including 50ns 18galv’d

spray systems 0 - 200 1101 or 1021 80ns and above to be hot dipped 18galvanised, before final

installation.(downstream of filter outlet

valve)

Water, fire fighting brackish 0 - 60 1201 above and underground 18

hot

spray systems 0 - 200 8081 Hot

dippedgalv’d

up to & including 50ns 18

spray systems 0 - 60 1201 80ns and above to be hot dipped 18

galvanised, before final

installation.(downstream of filter outlet

valve)

Water, process Demineralised 0 - 150 3031

Water, process demineralized 0 - 80 18040

Xylene 0 - 340 1011



STANLOW


Title :


CLASSES

of 17 REV G

AMD 1

Notes fo r Service Index

1. Ball valve class preferred by most chemical plants and/or for services requiring frequent valve

operations.

2. Selection between 1 and 3 mm corrosion allowance depending on the corrosivety of the mediumhas to be selected by the corrosion engineer.

3. For the definition of "High sour" and "Moderate sour", see DEP 31.38.01.11-Gen., Appendix 10.For new construction and/or modifications to existing piping, this Appendix should be used todetermine the severity of the wet H2S process environment and the piping class/materialsselected accordingly, taking into account economics and material availability.

4. See DEP 30.10.02.31-Gen. for low temperature service.

5. See DEP 31.38.01.11-Gen., Appendix 10 for piping in dry chlorine service.

6. See also DEP 31.10.11.31-Gen for gaseous oxygen systems.

7. Amine includes ADIP, MEA, DEA, AD, TEA and sulfinol:H2S case = H2S/CO2 > 0.01 for gas phase, > 0.02 for liquid phase;

CO2 case = H2S/CO2 < 0.01 for gas phase, > 0.02 for liquid phase.

8. Selection shall be carried out by materials engineer on the basis of the specific processconditions.

9. Hydrocarbon service includes aviation alkylate, LPG, C1-C4, paraffins and olefins, fuel gas, fueloil, gasoil, gasoline, isopentane, luboil, naphtha, pentane, toluene and xylene.

10. See DEP 31.40.10.19-Gen. for the use of GRP piping.

11. See DEP 80.47.10.31-Gen. for fire-fighting installations.

12. H2 partial pressure < 7 bar; wet H2S < 50 mg/kg; wet HCN < 20 mg/kg; S < 0.3 wt. %;TAN < 0.3;

H2S < 0.01 mol.%

13. S = Sulphur, Nap. Acid = Naphthenic Acids.

14. Consult a materials engineer for a check on the high temperature sulphidation corrosion rate and

select materials accordingly.

15. See DEP 31.38.01.11-Gen., Appendix 10 for piping in hydrofluoric acid service.

16. See DEP 31.38.01.11-Gen., Appendix 10 for piping in sodium hydroxide (caustic soda) serviceThe same requirements are applicable to potassium hydroxide service.

17. See DEP 31.38.01.11-Gen., Appendix 10 for piping in sulphuric acid service.

18. Stanlow recommended practice.



STANLOW


Title :


CLASSES

of 17 REV G

AMD 1

4. Summary of Revisions to ETS 601 STANLOW AND SHELL HAVEN Piping Classes (since revF AMD 2)

a) Gaskets 150# as per R&C class (low Stress Spiral wound gaskets replacedBy Tanged Insert gaskets in 150# Class)Gaskets 300# to 1500# to be Stanlow specific Spiral Wound.

b) Small bore gate globe valves – socket weld option removed.

c) In carbon steel classes ASTM A350-LF2 branch nipples are Now of ASTM A105material (except low temp class) Material reflects that of piping class, not all low temp

d) Meter Runs as per SGSI R&C classes see S.G.S.I. STD Drg S38.132

e) Pipe Schedule as per SGSI R&C classes (Reduced schedules in some larger sizes)

f) Branch Nipples Outlet Profile modified to industry standard.

g) Valves rationalised as per SGSI R&C classes.

h) Flanged Thermowells as per SGSI R&C classes see S.G.S.I. STD Drg S38.113

5. S.G.S.I. Standard Drawings.

S38 113 Flanged Thermowell DN40 ASME Classes up to 1500 incl

S38 130 Orifice Flanges, Raised Face, With Flanged Tappings ANS Class 300 to 2500 Incl, Nom Size Dn to 600 Incl

S38 134 Orifice Meter Runs with Flange Ends nom size 15 to 40 incl ANS Class 150 To Class 1500 Incl

S38.132 Orifice Meter Runs with Flange Tapping Ans class 300 to 2500 inclNom size Dn 50 to 300 incl



STANLOW


Title :


CLASSES

of 17 REV G

AMD 1

6. P.U. Specific Piping classes See Stanlow Web:- Stanlow Engineering Services ETS’S

CRACKING – OMC Senior Plant Engineer ref indicator OMC/20/09

PLANT

CCU 2. Drg No 592766 (For CCU 2 Piping Classes)

GSU 2 On plot Drg No 632160 (For GSU2 On plot Piping Classes)

HFA On plot Drg No 642125 (For HFA On plot Piping Classes)

EBU ON PLOT Drg 661352 (For EBU On plot Piping Classes)

SECONDARY PROCESSING – OMP

Senior Plant Engineer ref, indicator OMP/44/07

Drg No 717748 (For all Secondary Processing Piping Classes)

PLANT

HVI

PLATFORMER 2

PLATFORMER 3

AROMATICS

HDS 2

SOLVENTS AND RESINS –CAS Senior Plant Engineer ref indicator CRS/30/35

Drg No 717191 (For all Solvents and Resins Piping Classes)

PLANT

SOLVENTS

RESINS

U7800



STANLOW


Title :


CLASSES

of 17 REV G

AMD 1

ALCOHOLS AND ADDITIVES – CAS Senior Plant Engineer ref indicators CMS/20/11

& CMS/21/11Drg No 725501 (For all Alcohols and Additives Piping Classes)

PLANT

ALCOHOLS

ADDITIVES

DISTILLITION and UTILITIES ODU Senior Plant Engineer ref indicator ODU/30/08

Drg No 723920 (For all Distillation Piping Classes)

Drg No 720150 (For all Utilities Piping Classes)

PLANT

DISTILLATION

UTILITIES

ADIP REGEN

SOUR WATER STRIPPER

WASTE MANAGEMENT

SHOP CMO Senior Plant Engineer ref, indicator CMO/30/19

PLANT

Drg No 716992 (For SHOP Piping Classes)

SHOP

ADAP

RM17

N.W.E.P

SLCS – UOCL (Lubricants) Senior Plant Engineer ref indicators UOCL/34

Drg No 725539 (For SLCS – UOCL Lubricants Piping Classes)

SHELL HAVEN Engineering Support SVN-BIT/2



STANLOW


Title :


CLASSES

of 17 REV G

AMD 1

7. Conversion Table

REV F

Class number

Material

descrip tion Conversion / New

REV G

Class number Notes

S1101.0 Carbon steel A106-B Now use Piping class G011011


S1102.2 Carbon steel PWHT Now use Piping class G011023


Carbon steel A106-B NEW Piping class G011041



S1106.0 Carbon steel A106-B Now use Piping class G011060 Stanlow 100% rad




S1112.0 Carbon steel A106-B Now use Piping class G011120 Stanlow 100% Radiography

S1115.0 Carbon steel A106-B Now use Piping class G011150Stanlow (high vac)

Restricted to maintenance of existing

facilities

S1117.0Carbon steel A333 LT

F-GrNow use Piping class G011172


F-Gr PWHTNow use Piping class G011173


S1126.0 Carbon steel A106-B Now use Piping class GO11261


S1137.0 Carbon steel A106-B Now use Piping class G011373 AMD1

S1137.1

Carbon steel A106-B

PWHT Now use Piping class G011372 AMD1

S1204.0 Alloy steel (5Cr-0.5Mo) Now use Piping class G012040

S1208.0 Alloy steel (0.5Mo) Now use Piping class G012080

S1218.0 Not issued Contact PRJ/42/01 (AMD 1)



STANLOW


Title :


CLASSES

of 17 REV G

AMD 1

S1301.0Stainl steel AISI

321/347Now use Piping class G013011

S1302.0 Stainl steel AISI 316 Now use Piping class G013021

S1303.0 Stainl steel AISI 316 Now use Piping class G013031 AMD 1 (liner removed)

S1309.0Stainl steel AISI 304

LTNow use Piping class G013091


Stanlow (high vac)Restricted to maintenance of existing

facilities


Stanlow

Restricted to maintenance of existing

facilities


321/347Not issued Contact PRJ/42/01

S1402.0 Alloy Not issued Contact PRJ/42/01 (AMD1)

1501.0 Aluminium brass Not issued Contact PRJ/42/01 (AMD1)

S1602.0 MONEL 400 Now use Piping class G016021

1607.0 Hastalloy B2 Now use Piping class G016071

GRE-Aromatic amine NEW class G017011

GRVE-Bisphenol A NEW class G017012 AMD1

GRE-Allphaticamine+alum foil

NEW class G017015

S1702.0 PVC Now use Piping class G017020 Stanlow

1705.0 GRE-Aromatic amine Now use Piping class G017011

1706.0 GRE-Aromatic amine Now use Piping class G017011

GRE-Aromatic amine NEW class G017021

1709.0GRE-Aromatic amine

SourNow use Piping class G017031

1710.0 GRVE-Bisphenol A Now use Piping class G017102

1711.0 GRE Not issued Contact PRJ/42/01 (AMD1)

1712.0 GRE-Allphatic amine Now use Piping class G017121

GRE-Novolac epoxy NEW class G017201

S1801.0 API 5L –B GALV Now use Piping class G018011

1803.0 API 5L –B

Cement linedNot issued Contact PRJ/42/01 (AMD1)

1804.0 API 5L –B

Rubber linedNow use Piping class G018040 Stanlow

S1808.0 API 5L –B GALV Now use Piping class G018081



STANLOW


Title :


CLASSES

of 17 REV G

AMD 1

S1810.0 API 5L –B GALV Not issued Contact PRJ/42/01 (AMD1)

1812.0 API 5L –B

Glass linedNot issued Contact PRJ/42/01 (AMD1)

S1816.0Carbon steel PTFE-

linedNow use Piping class G018160



S3102.2Carbon steel A106-B

PWHTNow use Piping class G031023



Carbon steel A106-B NEW class G031042










AMD 1

(gasket MESC)


F-Gr PWHTNow use Piping class G031173

S3126.0 Carbon steel A106-B Now use Piping class G031261 AMD 1

(gasket MESC)



AMD 1

(gasket MESC)

S3130.0 Carbon steel A106B Now use Piping class G031300


S3137.1Carbon steel A106B


S3201.0 Alloy steel (1.25Cr-

0.5Mo)Now use Piping class G032010





S3208.0 Alloy steel (0.5Mo) Now use Piping class G032080



STANLOW


Title :


CLASSES

of 17 REV G

AMD 1



S3218.0 3.5 Ni. Not issued Contact PRJ/42/01 (AMD1)







S3309.0Stainl steel AISI 304


S3313.0 Stainl steel AISI 316 Now use Piping class G033130 Stanlow

Restricted to maintenance of existingfacilities


321/347 Now use Piping class G033140 StanlowRestricted to maintenance of existing

facilities


Carbon steel A106-BNEW class

G061031


G061041


G061042




S6117.0Carbon steel A333 LT-

F GrNow use Piping class G061172

Carbon steel A333 LT-F Gr PWHT

New class G061173


S6137.0 Carbon steel A106B Not issued Contact PRJ/42/01

S6137.1Carbon steel A106B


S6201.0 Alloy steel (1.25Cr-0.5Mo)

Now use Piping class G062010

Alloy steel (1.25Cr-0.5Mo)

New class G062011



Alloy steel (1.25Cr-0.5Mo)

New class G062021







STANLOW


Title :


CLASSES

of 17 REV G

AMD 1






S63090Stainl steel AISI 304


S6325.0 Stainl steel AISI 304 H Now use Piping class G063250 Stanlow -AMD1




S9106.0 Carbon steel A106B Now use Piping class G091060 Stanlow 100% Radiography


S9117.0 Carbon steel LT F-Gr Now use Piping class G091172


S92010 Alloy steel (1.25Cr-







S9305.0 Stainl steel AISI321/347 Now use Piping class G093050




S151070 Carbon steel A106-B Now use Piping class G151071

S151260 Carbon steel A106-B Now use Piping class G151261

S152020 Alloy steel (1.25Cr-


S153050Stainl steel AISI321/347

Now use Piping class G153050

ETS 601, Piping Classes

Documents

Transcript of ETS 601, Piping Classes