Ethernet to Modbus Data Gateway ADAM-4572 Ethernet To Modbus Solution Connecting the field devices...
Transcript of Ethernet to Modbus Data Gateway ADAM-4572 Ethernet To Modbus Solution Connecting the field devices...
Ethernet to Modbus Data Gateway
ADAM-4572
Ethernet To Modbus Solution
Connecting the field devicesto
Internet/intranet solution
What’s your problem on your SCADA & Control System
The HMI server is only your one choice !!!The HMI server is only your one choice !!!Does HMI server regard as a dedicated data gateway or HMI
server?How much time you want to set-up this server ?You must pay double cost to maintenance server S/W or set-up redundancy HMI S/W server ,
HMI Server 3’rd party Controllers w/Modbus RS485/422
TCP/IP Network ( Ethernet)
Operator Stations - NT/95/98
(With Modbus driver)
What is your good solution for distributed controlWhat is your good solution for distributed control
What’s your standard communication protocol & wiring for
installation , implementation & maintenance
standardize ?
Most of field’s devices support Modbus protocol
Ask our device supplier ex: PLC , DCS , RTU , power meter , recorder …..etc provide Modus I/F
The cheapest solution of creating you distributed control system , SCADA , Factory automation
How many operator station can access the control data concurrently ?
Does any of operator station can access the any site data ?
Do you want to pay about US$500 - 2500 to order a Ethernet card and integrated your control system into
Ethernet?
What’s your problem on your SCADA & Control System
Where is your right place to install HMI S/W serverWhere is your right place to install HMI S/W serverUnmanned field site ?
Waste water site?Power station site?Utility supply site ?…………etc
Good air conditional operation environmental .Need a control room to install it.More money to built-up stable operating environment.
What’s your problem on your SCADA & Control System
ADAM-4572 : Ethernet to Modbus Data Gateway
Now ,ADAM-4572 is designed as a field data Gateway ,Dedicated , Ethernet-enable & industrial grade to solve your problems
It will let your field Modbus devices :•Connect to Intranet/Internet •Standardize distributed solution •Risk-sharing •Standard wiring •Free maintenance•Cost saving
5 /
Diagnostic LED•Tx/Rx•Link Ok•Speed status•serial port status
Ethernet Port•10/100Mbps •Auto-sensing
Serial Port•RS232/485/422 selectable•Up to 115.2Kbps•Automatic data flow
S/W Function•MODBus/TCP driver•Auto-searching •Windows Utility•8 Tasks concurrently•Provide OPC server
ADAM-4572 : Ethernet to Modbus Data Gateway Overview
Installation•Dim: Same ADAM-4000•Operating temp. : 0-60 DegC•DIN-rail mounting•Unregulated 10-30Vdc w/surge protection
ADAM-4572
HMI platform
Client stations
Ethernet
InternetLocal HMI
Local client
RS485RS422
RS232
ADAM-5511
PLC
Meter
Worldwide first release 10/100Mbps & serial port configurable Standard Protocol :
Ethernet : Modbus/TCP Serial : Modbus/RTU , ASCII
Provide internet connection as data gateway for 3rd party HMI platform
User App. S/W can execute on any of OS (Unix , Linux , Windows)
ADAM-4572 : Key features
Multi-master : max. 8 PCs can access one ADAM-4572 data
through the intranet or internet concurrently
ADAM-4572
RS232
ADAM-5511 MeterPLC
Ethernet
Secret weaponProvide 3 individual serial T/B for flexible connection.Case1 : Configure RS-232 can connect one RS-232 device
Secret weaponProvide 3 individual serial T/B for flexible connection.Case1 : Configure RS-232 can connect one RS-232 device
ADAM-4572 : Key features
Case 1 :Configure “RS-232 “
OR OR
ADAM-4572
RS232
ADAM-5511 MeterPLC
Ethernet
ADAM-4572 : Key features
Case 2 :Configure “RS-422 “
RS422
Secret weapon:Provide 3 individual serial T/B for flexible connection.Case2 : Configure RS-422 can connect 32 nodes RS232/422 devices( only one RS-232 device)
Secret weapon:Provide 3 individual serial T/B for flexible connection.Case2 : Configure RS-422 can connect 32 nodes RS232/422 devices( only one RS-232 device)
ADAM-4572
RS232
ADAM-5511
Ethernet
ADAM-4572 : Key features
Case 3 :Configure “RS-485 “
PLC
Meter
RS422
Meter
RS485
PLC
Secret weapon:Provide 3 individual serial T/B for flexible connection.Case3 : Configure RS-4485 can connect 32 nodes RS232/422/485 devices( only one RS-232 device)
Secret weapon:Provide 3 individual serial T/B for flexible connection.Case3 : Configure RS-4485 can connect 32 nodes RS232/422/485 devices( only one RS-232 device)
5 /
ADAM-4572: Ethernet to Modbus Data Gateway
• Communication speed :10/100 Mbps 10 Base-T/100-Base-TX Communication speed :10/100 Mbps 10 Base-T/100-Base-TX • TCP,UDP,IP,ARP,Modbus/RTU, ASCII , Modbus/TCP ProtocolTCP,UDP,IP,ARP,Modbus/RTU, ASCII , Modbus/TCP Protocol• RS-232/422/485 Serial port configurableRS-232/422/485 Serial port configurable• Serial port speed up to 115.2KbpsSerial port speed up to 115.2Kbps• Very easy to Install & set-up( Only 5 steps/5 minutes )Very easy to Install & set-up( Only 5 steps/5 minutes )•Concurrently connection up to 8 tasksConcurrently connection up to 8 tasks• Compatible with HMI S/W running on Modbus/TCP standardCompatible with HMI S/W running on Modbus/TCP standard•Provide Modbus/TCP protocol OPC serverProvide Modbus/TCP protocol OPC server• Provide automatic RS485 data flow controlProvide automatic RS485 data flow control• Unregulated 10 to 30 Vdc with power surge protection Unregulated 10 to 30 Vdc with power surge protection • Integrate ADAM-5511 or 3’rd party devices Integrate ADAM-5511 or 3’rd party devices
ADAM-4572 : Features Summary
ADAM-4572 Configuration procedures: Five stepsOfficeOfficeIntranetIntranet
Site 4Site 4
HMI &HMI & ADAM-4572 ADAM-4572 configuration S/Wconfiguration S/W
Wiring all ADAMs Wiring all ADAMs through Ethernet cablethrough Ethernet cable
Site 5Site 5Site 7Site 7
Site 3Site 3Site 2Site 2
Site 1Site 1
Site 6Site 6
Step 1:
Device Auto-searching & key in the description on the ADAM-4572 utility S/W
Step 2 :
Auto-detecting Comm. Speed & mode
Step 3: IP address setting
Serial Port SettingRS-232/422/485
Step 4 :
MODBus Parameter Setting
Step 5 :
Installation : Modbus serial devices wiring
RS-232 connection
RS-422 connection
RS-485 connection
Provide the individual wiring terminal
Installation : Modbus/TCP and OPC server S/W driver
Provide free charge OPC server
Competition Competitor Compare Table
Item Functions ADAM-4572 Lantronix CoBox Schneider 174 CEV300 101 Ethernet side 1 port 1 port 1 port
1_1 Comm. speed 10/100Mbps auto-sensing 10Mbps 10Mbps
1_2 protocol: IP TCP.UDP,ARP TCP,ARP,UDP,SNMP,DHCP TCP,ARP,UDP,SNMP
1_3 Modbus Modbus/TCP Modbus/TCP Modbus/TCP
1_4 Connector RJ-45 RJ-45 RJ-45
2 Serial side RS-232/422/485 flexible 1 port RS-232/422/485 seletable 1 port RS-232/422/485 seletable
2_1 Comm. speed 300 to 115.2Kbps 300 to 115.2Kbps 300 to 38.4Kbps
2_2 Connector Plug-in screw T/B DB25 for DCE , DB9 for DTE Screw terminal
2_3 Flow control Auto flow control XON/XOFF , RTS/CTS RTS/CTS
2_4 When Configure RS-232 RS-232 RS-232 RS-232
2_5 When Configure RS-422 RS-232/422 RS-422 RS-422
2_6 When Configure RS-485 RS-232/485/422 RS-485 RS-422/485
3 Utility S/W MS-Window95/98/NT Console & Telnet mode Console & Telnet Mode
3_1 Configure method Through Ethernet Through RS-232 Through RS-232
3_2 Devices searching Auto-searching Manual Manual
3_4 Devices management User defined name , description no no
4 Front LED TX/RX,Link OK, power,Speed TX/RX,LinkOK, power,Speed TX/RX,LinkOK, power,Speed
5 Operating Temp. 0 to 60 DegC 5 to 50 DegC 0 to 60 DegC
6 Power supply Unregulated 1- to 30 Vdc Exteral Ac110Vdc adapter 9 to 30 Vdc
7 Market price US$450 US$695 US$650