et AONVOY INDUSTRIES, INC.

115,000 SQ. FT. PLASTIC INJECTION MOLDINGOPERATION INCLUDING (20) MOLDING MACHINES

TO 1,000 TON, AUXILIARY AND SUPPORT EQUIPMENT



Cincinnati Industrial Auctioneers Inc.2020 DUNLAP ST., CINCINNATI, OHIO 45214 PHONE (513) 241-9701 / FAX (513) 241-6760WEBSITE: cia-auction.com for printable brochures, catalog, terms and proxy-bidding

Cincinnati Industrial Auctioneers Inc.SALE UNDER THE MANAGEMENT OF

Complete Plant Closure, Ordered Sold By Secured Creditor

AONVOY INDUSTRIES, INC.AKA AONVOY PLASTICS FKA TALLY HO PLASTICSAONVOY INDUSTRIES, INC.AKA AONVOY PLASTICS FKA TALLY HO PLASTICS1020 South Bolton Street – Jacksonville, Texas 75766

120 Miles East of Dallas, TX / 30 Miles South of Tyler, TX

THURSDAY, MAY 17TH, STARTING AT 9:00 AM LOCALTHURSDAY, MAY 17TH, STARTING AT 9:00 AM LOCALINSPECTION: WEDNESDAY, MAY 16TH, FROM 10:00 AM TO 4:00 PM

See Instructions on Page 2

To Become a Qualified Bidder on the Internet

1,000 Ton X 165 Oz. Van Dorn Wide Platen Machine w/ Retractable Tie Bar (1998)

(4) 650 Ton X 80 Oz. Van Dorn HT Machines (To 1997) (9) Lift Trucks to 15,500 Lb. Capacity (To 2007)

Haas SL-10 CNC Lathe (2007)

1236775D CIA Aonvoy Industries-6 4/19/12 7:30 AM Page 3

THURSDAY, MAY 17THTHURSDAY, MAY 17TH

PLASTIC INJECTIONMOLDING MACHINES1,000 Ton X 165 Oz. Van DornModel 1000HP-165 Wide PlatenHydraulic Clamp Plastic InjectionMolding Machine; S/N 0500,Pathfinder 5000 Control, DistanceBetween Tie-Bars: 52” X 44”, Platen Size:73.5” X 65”, Minimum Mold Height: 12”,Maximum Daylight: 60”, Retractable TopFront Tie-Bar For Easier Mold Installation(New 1998) SEE PHOTO

850 Ton X 140 Oz. CincinnatiMilacron Model VH850-140Hydraulic Clamp Plastic InjectionMolding Machine; S/N 3908A21/92-3,Camac VEL Control, Distance BetweenTie-Bars: 45.3” X 37.4”, Platen Size: 66” X58”, Minimum Mold Height: 14”,Maximum Daylight: 75.6” (New 1992)

SEE PHOTO

700 Ton X 111 Oz. CincinnatiMilacron Model H-700 HydraulicClamp Plastic Injection MoldingMachine; S/N 4007A2179042,Refurbished and Retrofitted with CamacVSX Control In 1998, Distance BetweenTie-Bars: 36.5” X 36.5”, Platen Size: 54.5”

X 54.5”, Minimum Mold Height: 12”,Maximum Daylight: 60” (Refurbished /New Control 1998) SEE PHOTO

700 Ton X 125 Oz. Van DornModel 700H-RS-125F-3Y-HTHydraulic Clamp Plastic InjectionMolding Machine; S/N 442, PathfinderControl, Distance Between Tie-Bars: 36.5”X 36.5”, Platen Size: 53.5” X 53.5”,Minimum Mold Height: 16”, MaximumDaylight: 73” (New 1988) Machine Not InService

(2) 650 Ton X 80 Oz. Van DornModel 650HT-80 Toggle ClampPlastic Injection Molding Machine;S/N 205 and 206, Pathfinder 4500Control, Distance Between Tie-Bars: 36” X36”, Platen Size: 53” X 53”, MinimumMold Height: 12”, Maximum Daylight:69.5” (New 1997) SEE PHOTO

650 Ton X 80 Oz. Van Dorn Model650HT-G80 Hydraulic ClampPlastic Injection Molding Machine;S/N 0166, Pathfinder Control, DistanceBetween Tie-Bars: 36” X 36”, Platen Size:53” X 53”, Minimum Mold Height: 12”,Maximum Daylight: 69.5” (New 1996)

SEE PHOTO

850 Ton X 140 Oz. Cincinnati Milacron Model VH850-140 Hydraulic Clamp Plastic Injection MoldingMachine

650 Ton X 80 Oz. Van Dorn Model 650HT-G80 Hydraulic Clamp Plastic Injection Molding Machine

(2) 650 Ton X 80 Oz. Van Dorn Model 650HT-80 Toggle Clamp Plastic Injection Molding Machine

1,000 Ton X 165 Oz. Van Dorn Model 1000HP-165 Wide Platen Hydraulic Clamp Plastic InjectionMolding Machine

NEW1998

NEW1997

NEW1996 WEBCAST BIDDER INSTRUCTIONS

➢ All Internet bidders must register for this auction atwww.bidspotter.com at least 48-Hours Prior to the SaleDate, if you do not you will not be approved.

➢ All Internet bidders must Post a Deposit of Approx. 25%of Your Planned Spending Budget or $5,000 Minimumwith Cincinnati Industrial Auctioneers in Order to beapproved to Bid. Those who do Not Post the Deposit WillNot be Approved. Period.

➢ Only Major Items Will be Available for Online Bidding. Please refer to the Listing on www.bidspotter.com for Available Online Items.

➢ There is a 18% Buyer’s Premium in Effect for All OnlinePurchases.

➢ We Highly Recommend that Potential Buyers Attend thisAuction & Bid Live Onsite. This will give you the Ability toInspect the Items & Fully Appreciate Their Condition,Along with Saving You 3% of the Buyer’s Premium.

No Last Minute Registrations will be accepted. Make Sure toRegister & Post Your Deposit No Later than 48-Hours Priorto the Start of the Auction.

PRIME INDUSTRIAL REALESTATE FOR SALE BY OWNER

113,000 Sq. Ft. +/- Manufacturing and WarehousingBuilding on approx. 6.117 Acres; Formerly Used asInjection Molding Operation, High CeilingWarehouse Area, 15,000 Sq. Ft. Air ConditionedOffice, For More Information Contact MichealLavender (903) 939-2265


AONVOY INDUSTRIES, INC.AONVOY INDUSTRIES, INC.

650 Ton X 80 Oz. Van Dorn Model 650-RS-80F-HT Toggle Clamp Plastic Injection MoldingMachine; S/N 116, Pathfinder Control, DistanceBetween Tie-Bars: 36” X 36”, Platen Size: 53” X 53”,Minimum Mold Height: 12”, Maximum Daylight: 69.5”(New 1994)

500 Ton X 54 Oz. Cincinnati Milacron ModelVH500-54 Hydraulic Clamp Plastic InjectionMolding Machine; S/N 3905A21/92-36, Camac VELComtrol, Distance Between Tie-Bars: 34” X 34”, PlatenSize: 48” X 48”, Minimum Mold Height: 15”, MaximumDaylight: 55” (New 1992) SEE PHOTO

500 Ton X 60 Oz. Van Dorn Model 500HT-RS-60F Toggle Clamp Plastic Injection MoldingMachine; S/N 129M, Pathfinder Control, DistanceBetween Tie-Bars: 32.5” X 32.5”, Platen Size: 47.8” X47.8”, Minimum Mold Height: 10”, Maximum Daylight:59” (New 1989) SEE PHOTO

300 Ton X 29 Oz. Cincinnati Milacron ModelVT300-29 Toggle Clamp Plastic InjectionMolding Machine; S/N T38A0399008, Camac VSXControl, Distance Between Tie-Bars: 25” X 24.5”, PlatenSize: 37” X 37”, Minimum Mold Height: 8”, MaximumDaylight: 48” (New 1999) SEE PHOTO

300 Ton X 30 Oz. Van Dorn Model 300-30FHToggle Clamp Plastic Injection MoldingMachine; S/N 2536, Pathfinder Control, DistanceBetween Tie-Bars: 25” X 25”, Platen Size: 39” X 41”,Minimum Mold Height: 10.5”, Maximum Daylight: 38”(New 1994) SEE PHOTO

300 Ton X 30 Oz. Van Dorn Model 300-RS-30F-HT Toggle Clamp Plastic Injection MoldingMachine; S/N 2251, Pathfinder Control, DistanceBetween Tie-Bars: 25” X 25”, Platen Size: 37” X 37”,Minimum Mold Height: 8”, Maximum Daylight: 49”(New 1991) Machine Not In Service

220 Ton X 20 Oz. Cincinnati Milacron Model VT220-20 Toggle Clamp Plastic Injection MoldingMachine; S/N T37A0300038, Only 29,000 HoursShowing, Camac VSX Control, Distance Between Tie-Bars: 21” X 19”, Platen Size: 31” X 29”, Minimum MoldHeight: 6”, Maximum Daylight: 38” (New 1999)

SEE PHOTO

220 Ton X 20 Oz. Cincinnati Milacron Model VT220-20 Toggle Clamp Plastic Injection MoldingMachine; S/N T37A0397059, Camac VSX Control,Distance Between Tie-Bars: 21” X 19”, Platen Size: 31” X29.5”, Minimum Mold Height: 6”, Maximum Daylight:38” (New 1997) SEE PHOTO

220 Ton X 20 Oz. Cincinnati Milacron Model VT220-20 Toggle Clamp Plastic Injection MoldingMachine; S/N T37A0193032, Camac VSX Control,

Distance Between Tie-Bars: 21” X 19”, Platen Size: 31” X29.5”, Minimum Mold Height: 6”, Maximum Daylight:38” (New 1993)

120 Ton X 7.58 Oz. Cincinnati Milacron ModelVSX 120-7.58 Toggle Clamp Plastic InjectionMolding Machine; S/N S90A0497-007, Camac VSXControl, Distance Between Tie-Bars: 17” X 17”, PlatenSize: 26.5” X 26.5”, Minimum Mold Height: 7”,Maximum Daylight: 27.5” (New 1997)

120 Ton X 8 Oz. Van Dorn Model 120-RS-8F-HTToggle Clamp Plastic Injection MoldingMachine; S/N 462, Pathfinder Control, DistanceBetween Tie-Bars: 17” X 17”, Platen Size: 25” X 25”,Minimum Mold Height: 6”, Maximum Daylight 30”(New 1993) SEE PHOTO

85 Ton X 4.4 Oz. Cincinnati Milacron Model VS-85-4.4 Toggle Clamp Plastic Injection MoldingMachine; S/N S85A0394-025, Camac VSX Control,Distance Between Tie Bars: 16” X 14”, Platen Size: 24” X22”, Minimum Mold Height: 6”, Maximum Daylight: 28”(New 1994)

55 Ton X 2.27 Oz. Cincinnati Milacron ModelVV55-2.27 Toggle Clamp Plastic InjectionMolding Machine; S/N S55A0500044, Only 23KHours Showing, Xtreem ST Control, Distance BetweenTie-Bars: 12.8” X 12.2”, Platen Size: 20” X 19.5”,Minimum Mold Height: 6”, Maximum Daylight: 25”(New 1999) SEE PHOTO

PLASTIC GRANULATORS18” X 20” Foremost Model HD-5B PlasticGranulator; S/N 33292

16” X 29” Nelmor Model G1629-5M1 PlasticGranulator, (2) 15 HP Motors; S/N 06663

SEE PHOTO

16” X 20” Ball & Jewell Model MD-1620-X 30HP Plastic Granulator; S/N 7602-155581

14” X 20” Cumberland Model 585GRAN3KN 30HP Plastic Granulator; S/N 35910-7363

12” X 29” Nelmor Model G12295M1 PlasticGranulator, (2) 15HP Motors; S/N 77109840

SEE PHOTO

12” X 20” Nelmor Model G1220M1 15 HPPlastic Granulator; S/N 82-04-17539, n/a

(4) 10” X 12” Nelmor Model G1012M1 10HPPlastic Granulators; S/N 77-09-10751, S/N 75-10-8696, S/N 77-12-11332, S/N 78-0-12776

10” X 12” Nelmor G1012M1 7.5 HP PlasticGranulator; S/N 78-08-12495

10” X 12” Nelmor Model G1012M1 3HP PlasticGranulator; S/N 74-04-7401

220 Ton X 20 Oz. Cincinnati Milacron Model VT 220-20 Toggle Clamp PlasticInjection Molding Machine

700 Ton X 111 Oz. Cincinnati Milacron Model H-700 Hydraulic Clamp Plastic InjectionMolding Machine

300 Ton X 30 Oz. Van Dorn Model 300-30FH Toggle Clamp Plastic InjectionMolding Machine

500 Ton X 60 Oz. Van Dorn Model 500HT-RS-60F Toggle Clamp Plastic InjectionMolding Machine

500 Ton X 54 Oz. Cincinnati Milacron Model VH500-54 Hydraulic Clamp PlasticInjection Molding Machine

220 Ton X 20 Oz. Cincinnati Milacron Model VT 220-20 Toggle Clamp PlasticInjection Molding Machine

300 Ton X 29 Oz. Cincinnati Milacron Model VT300-29 Toggle Clamp Plastic InjectionMolding Machine

NEW1999

NEW1999

NEW1997

Refurbishedwith New Control

1998



8” X 10” Nelmor G810M1 5HP Plastic Granulator; S/N 77-09-10819

(2) 8” X 12” Cumberland Model 8X12-3KN 5 HP PlasticGranulators; S/N 72400-93606, S/N 72400-92515

5” X 5” Comet Model GR-82 Plastic Granulator, 1 HP; S/N829900 (New 1999)

DEHUMIDIFYING DRYERSConair Model D-400A Dehumidifying Dryer; S/N 2-225 w/ 1,500LB Insulated Hopper on Stand

(2) Conair Model CS-151 Dehumidifying Dryer Systems; S/N’sN/A w/ 600 LB Insulated Hoppers on Cart

(2) Conair Model CD-100 Dehumidifying Dryers; S/N OD0165,S/N OD0164 w/ 400 LB Insulated Hoppers on Cart

Conair Model CD-100 Dehumidifying Dryer; S/N 25316, 480 Volt

Conair Model SC-30 Carousel Dehumidifying Dryer; S/N 42647with 120# Model CH16-4 Drying Hopper

AEC Whitlock Model WD-25MR Mini Dryer; S/N 99J0527 withHopper and Model SRL-01 Autoloader (New 1999)

BLENDERConair Micro Conomix Model MCMZX2PL Two-ComponentBlender on Surge Bin; S/N 0A0538, Control Panel SEE PHOTO

PORTABLE CHILLER5 TON Thermal Care Model AQ0A0604 Portable AirCondensed Accuchiller; S/N CH-15614, 5 HP Compressor, R22Refrigerant 30°F Minimum Temperature, 60°F Maximum Temperature

SEE PHOTO

LIQUID MOLD TEMPERATURE CONTROLLERS(3) AEC Model ECU100 Liquid Mold Temperature Controllers;S/N 38D0793, S/N 38D0792, S/N 38D0791, 1 HP, 9 KW, 240 Volt

(2) Sterlco Model M9420-FX Liquid Mold TemperatureControllers; S/N 96C5177, S/N N/A, 9 KW

(2) AEC Model TDW02M1253 Liquid Mold TemperatureControllers; S/N 98F5386, S/N 99H5346, 12 KW, 230 Volt

AEC Model TCU200 Liquid Mold Temperature Controller; S/N00B5402, 2 HP, 12 KW, 230 Volt

AEC Model ECU200-9-2-2 Liquid Mold TemperatureController; S/N 36B0765, 2 HP, 9 KW, 230 Volt

STORAGE SILOS(4) 12’ Dia. X 20’ High IMCS Corrugated Steel Bolt TogetherStorage Silos; Each w/ Ladder SEE PHOTO

(2) 12’ Dia. X 30’ High Welded Steel Storage Silos

CENTRAL CHILLER SYSTEM ANDRELATEDTrane Model CGACC804RANJJ40GM Central Chiller Unit; S/NJ86H71818, (2) Compressor Motors Rated at 70 RCA & 315 CRA

SEE PHOTO

Advanced Process Model KPH-40 Chiller; S/N 77553

Aqua-Reef Fiberglass Cooling Tower

DECORATING EQUIPMENTBranson Series 910iw Ultrasonic Welder; S/N YE00038

Branson Series 8400 Ultrasonic Welder; S/N WT3098J

Printex Model PTX-125 Pad Printer; 18” Throat, Foot Pedal

United Silicone Model US25 Hot Foil Stamping Machine; S/N202640498, 8” X 12” Head Size, 2,000 Watts

Sonitek Model TS1500 Thermal Press; S/N ST-N-A-N-ENI, 4,000Watts

Acromark Model 680 Thermal Press; S/N 81033

Kensol Model 25 Hot Foil Stamping Machine; S/N A137J

MISC. MACHINERY AND EQUIPMENTIDS Vertical Type Hydraulic Cardboard Baler; 26” X 60” X 48”Bale Size

Orion Model 66-10 Rotary Pallet Stretch Wrap Machine; S/N195732, 48” Vertical Lift, 48” X 48” Platform

8’ Wide X 6’ Deep Binks Back Exhaust Paint Spray Booth(80) Sections 42” X 92” X 16’ High Adjustable Beam PalletRack(20) Sections 42” X 144” X 16’ High Adjustable Beam PalletRack

ELECTRIC BUSSWAYApprox. 165’ Electric Bussway W/ Disconnect Switches; 30’, 60’And 75’ Runs, See Auction Catalog for Details, Subject To WithdrawFrom Sale, Subject To Bid Confirmation

INJECTION MOLDS1,000’S of LBS of Injection Molds on Approx. 60 Skids, To beSold in Large Lots

MATERIAL INVENTORY*Approx. 100,000 in Cost Various Virgin, Regrind andProduct Inventory, See Website for Inventory **Subject toChange

12” X 29” Nelmor ModelG12295M1 Plastic Granulator,(2) 15HP Motors

16” X 29” Nelmor Model G1629-5M1 Plastic Granulator,(2) 15 HP Motors

Bank View Printex Pad Printer& United Silicone US25Decorating Press

(4) 12’ Dia. X 20’ High IMCS Corrugated Steel BoltTogether Storage Silos

Conair Micro Conomix ModelMCMZX2PL Two-ComponentBlender on Surge Bin

Bank View Branson910iw & 8400 UltrasonicWelders

Partial View Thermolators and Hot RunnerControllers

Partial View (6 of 16) Plastic Granulators to 18” X 20”and 30 HP

Partial View (2 of 7) Conair Dehumidifying Dryers w/Hoppers

55 Ton X 2.27 Oz. Cincinnati Milacron ModelVV55-2.27 Toggle Clamp Plastic InjectionMolding Machine

120 Ton X 8 Oz. Van Dorn Model 120-RS-8F-HTToggle Clamp Plastic Injection Molding Machine

NEW1999



LIFT TRUCKS(2) 15,500 LB Hyster Model S155XL LiftTrucks; S/N C024V02939E and S/NC024V02930E, 87” Standard Mast, 94.5” LiftHeight, Deisel, Cushion Tires, 48” Forks (New2007)15,000 LB Caterpillar Model T150D LiftTruck; S/N 5MD1907, LP Gas, Cushion Tire, 2-Stage Mast, Side Shift, 72” Forks, 108” MastHeight12,000 LB Caterpillar Model GC55K LiftTruck; S/N AT8800969, 98” Triple Stage Mast,226” Lift Height, LP Gas, Side Shift, CushionTires (New 2003)8,000 LB Hyster Model S80XMBCS LiftTruck; S/N E004V03455A, 83” Triple StageMast, 172” Lift Height, LP Gas, Cushion Tires,Side Shift, 42” Forks (New 2003)5,000 LB Hyster Model S50XM Lift Truck;S/N D187V33343B, 83” Triple Stage Mast, 189”Lift Height, LP Gas, Side Shift, Cushion Tires, 42” Forks (New 2004)3,000 LB Hyster Model S30FT Lift Truck;S/N E010V01623C, 83” Standard Mast, 130” LiftHeight, LP Gas, Cushion Tires (New 2005)3,000 LB Nissan Model KCPH01A15PVLift Truck; S/N KCPH01P904032, LP Gas,Cushion Tire 3-Stage Mast, Side Shift, 8,800Hours3,000 LB Mitsubishi Model FGC15 LiftTruck; S/N 51206, LP Gas, Cushion Tire, 3-Stage Mast, Side Shift, 189” Lift Height(2) 5,000 LB Toyota LP Gas Lift Trucks;S/N’s 60593 & N/A (Parts Only)

CNC TURNING CENTERHaas Model SL-10 CNC Turning Center;S/N 3077556, Haas CNC Control, 16-1/4” SwingOver Apron, 8” Swing Over Cross Slide, 6-1/2” 3-Jaw Chuck, 6,000 RPM, 15 HP, 6-1/4” X-Axis,14” Z-Axis, 12-Position Turret, Only Cut Plastic,Appears to be Low Hour Machine (New 2007)

SEE PHOTO

TOOLROOM MACHINERY2 HP Bridgeport Series II Special BaseVariable Speed Vertical Mill; S/N 1608S, 11”X 58” Table, PTF, Newall DRO SEE PHOTO1-1/2 HP Bridgeport Variable Speed VerticalMill; S/N 105543, 9” X 42” Table, PTF, DRO2.2 KW Lagun Variable Speed VerticalMill; S/N 31740, 10” X 44” Table, PTF, DRO

SEE PHOTO1 HP Index Vertical Mill; S/N 14102, 9” X40” Table1/2 HP Bridgeport / Millmate VerticalMill; Bridgeport Head, Millmate Base, CherryingHead, 7” X 36” Table 17” X 48” Leblond Regal Geared HeadEngine Lathe; S/N N/A, Spindle Speeds to 425RPM, 10” Chuck

15” X 60” Cincinnati UniversalCylindrical Grinder; S/N N/A, Drop DownAttachment SEE PHOTODeckel Model GK21 Engraving Machine;S/N 56771, 12-1/2” X 18” & 8” X 14” T-SlottedTables30” Arm X 6” Col. Toakikai ModelTRD600C Radial Arm Drill; S/N RHR-EOSix-Spindle Speeds / 85 - 1,440 RPM, 17” X 24”Table10” X 24” Southbend Cat. No. CLC3187ABCabinet Type Toolroom Lathe; S/N RKX1680 Ton Nugier Model H80-7 Hydraulic H-Frame Shop Press; S/N 631021, 48” BetweenUprightsParagon Model HT22 Bench Type ElectricHeat Treat Furnace; S/N 11470, MaxTemperature: 2000 Degrees, 21” X 21” X 12”High Chamber Size(2) 20” Powermatic Model 87 VerticalBand Saws; S/N’s 61-6145 & 4-5233, BladeWelders, 24” X 24” TableOther Toolroom Equipment Including; 20”Delta Model 28-640 Vertical Band Saw, 9” X 16”W.E. Wells Horizontal Band Saw, K.O. Lee ModelB300 Tool & Cutter Grinder, 12” X 32” NortonSurface Grinder; S/N M400, 6” X 12” ButterflyModel SLG8-18 Surface Grinder, 18” RockwellModel 70-400 Two-Spindle Production Drill, 6”Belt / 12” Disc Delta Combo Sander, (2) 3/4 HPBaldor Double End Grinders, 14” Black & DeckerAbrasive Chop Saw, Ex-Cello Carbide ToolGrinder, Kuhlmann Bench Tool Grinder, (2) DeltaSingle Spindle Floor Drills, 4 Ton Dayton ArborPress, 15” Troyke Rotary Table, Dumore Tool PostGrinders, (3) 6” Kurt Mill Vises, Drill Vises,Jacobs Drill Chucks, 5-C Collets, Angle Plates,Aloris Tool Post & Holders, Grinding Fixtures,H.S. Drills, Tops, Reamers, Carbide Inserts andMany Other Related Items

OVERHEAD CRANES ANDRELATED7-1/2 Ton X 40’ Approx. Span AnchorCrane Single Girder Top RunningOverhead Crane; Shaw Box, Electric CableHoist, 6-Way Pendant Control, Approx. 14’Under Hook Distance➢ Approx. 150’ of Free Standing Crane

Rail; 14’ High Floor Bolted Uprights – To be Sold Separately – Subject to BidConfirmation SEE PHOTO

6 Ton X 25’ Approx. Long General CraneFree Standing Monorail Crane System;S/N 7658, Lo-Hed Electric Cable Hoist, 4-WayPendant Control, 16’ High I-Beam Uprights5 Ton X 18’ Span B.F. Wallace Portable A-Frame Type Gantry Crane; JDNPneumatic Chain Hoist, Adjustable to 12’ UnderTop I-Beam Rail

3 Ton X 15’ Span Portable A-FrameGantry Crane w/ (1) 3 Ton & (2) 1 TonManual Hoists1 Ton X 8’ Span Portable Gantry Cranew/ (2) 1 Ton Manual Chain Hoists

AIR COMPRESSORS ANDRELATED50 HP Ingersoll Rand Model SSR-EP-50SE Rotary Screw Cabinet Type AirCompressor; S/N G4536U96083, 194 CFM,125 PSIG, 24,100 Loaded Hours SEE PHOTO25 HP Worthington Horizontal Tank Two-Stage Air CompressorZeks Refrigerated Air Dryer

INSPECTION EQUIPMENTDEA Model N/A Coordinate MeasuringMachine; S/N RWA00000200256, 30” X 35”Granite Table, Approx. 18” Clearance UnderBridge, IAD Worldwide Probes SEE PHOTOROI OMIS II Model 4X8 OpticalMeasurement Inspection System; S/N14340-97-208, System # 01-2001-07, 8” Z-AxisTravel, 4” X 8” Stage Travel, 4” X 8” Stage Size,(2) ROI Model 150 Illuminators, ROI Model1100 Digital Crosshair Generator, 13” PanasonicDiagonal Color Video Monitor (New 1997)

SEE PHOTO14” MicroVu Model M14 OpticalComparator; S/N 3608, 5” X 18” Slotted TableKayness Inc. Model D7053 Heat SourceMachine; S/N 901212, 120 Volts, 5 AmpsOther Inspection Tools and EquipmentConsisting of; 8” Micro Vu Bench TopComparator, Tinius Olsen Extrusion Plastometer,Tinius Olsen Model 1000 Tensile Tester,Impactkut Cut-Off Machine, Digital Scales, 18” X24” X 4” Thick Continental Granite Black GraniteSurface Plate w/ Stand and Other RelatedInspection Tools

SHOP AND SUPPORTEQUIPMENT Large Quantity of Shop and SupportEquipment Consisting of; 1,000 LB PrestoElectric Die Lift, (2) Dayton Electric Oil TransferPumps, (4) Hydraulic Pallet Trucks, Pedestal &Circular Shop Fans, Hardware, Indexes, Benches,Tables, Storage Cabinets, Self Dumping Hoppers,Heavy Duty Steel Die Storage Racks, SteelShelving, Large Maintenance Department withElectrical & Plumbers Items, Hydraulic Fittings,Hardware, Valves, Motors & Many Other RelatedItems

OFFICE EQUIPMENTOffice Furniture and EquipmentConsisting of; Desks, Chairs, Files, ConferenceRoom Table, Break Room Furniture and Related

Partial View (4 of 9) Lift Trucks To 15,500 Lb. Capacity

DEA Model N/ACoordinateMeasuring Machine

50 HP Ingersoll Rand ModelSSR-EP-50SE Rotary ScrewCabinet Type Air Compressor

2 HP Bridgeport Series IISpecial Base VariableSpeed Vertical Mill

2.2 KW Lagun VariableSpeed Vertical Mill

ROI OMIS II Model 4X8 Optical MeasurementInspection System

15” X 60” Cincinnati Universal Cylindrical Grinder

Trane Model CGACC804RANJJ40GM Central ChillerUnit

7-1/2 Ton X 40’ Approx. Span Anchor Crane OverheadCrane System w/ 150’ Free-Standing Crane Rail

Haas Model SL-10 CNC Turning Center

NEW AS2007

NEW2007

NEW1997


All equipment described herein will be sold “asis”, “where is” to the highest bidder or biddersfor cash in accordance with our regular termsand conditions of sale. Unless other satisfactoryarrangements are made, a 25% deposit in cash,certified or cashier’s check payable to CincinnatiIndustrial Auctioneers, Inc., is required on allpurchases. Firm and personal checks acceptedonly if accompanied by a letter from your bankguaranteeing your funds. All sales are subjectto state and/or local taxes unless a signedexemption form is presented at the time of pur-chase. All balances are due at the conclusionof the sale. No merchandise may be removedwhile the sale is in progress. All bidders mustcomply with our Standard Terms of Sale,copies of which will be available at the sale siteor can be obtained from our website.

15% ONSITE BUYER’S PREMIUM 18% ONLINE BUYER’S PREMIUM

TERMS OF SALE

AUCTIONEERS

From the I-635 Beltway / Rt. 175 Interchange onSoutheast End of Dallas. Proceed East on Rt. 175 towardsAthens / Jacksonville. Proceed Approx. 120 Miles East onRt. 175 Into Jacksonville, At the Intersection of NorthBolton (Texas Rt. 347) (Exxon Gas Station) go South onNorth Bolton & Proceed 1-1/2 Miles to Sale Site on Left.

DIRECTIONS


SALE DATE:Thursday, May 17th

STARTING AT 9:00 AM LOCALINSPECTION:

Wednesday, May 16th10:00 AM to 4:00 PM

FIRST CLASS MAIL! PRE-SORTFIRST CLASS

U.S. POSTAGEPAID

CINCINNATI, OHIOPERMIT NO. 3593

Important MailTO BE DIRECTED TO THE ATTENTION OF EXECUTIVE PERSONNEL☞

SALE DATEThursday,May 17th9:00 am

Cincinnati Industrial Auctioneers Inc.2020 DUNLAP ST., CINCINNATI, OHIO 45214 PHONE (513) 241-9701 / FAX (513) 241-6760WEBSITE: cia-auction.com for printable brochures, catalog, terms and proxy-bidding

Cincinnati Industrial Auctioneers Inc.SALE UNDER THE MANAGEMENT OF



Although information has been obtained from sourcesdeemed reliable, the auctioneer makes no warranty orguarantee, expressed or implied, as to the accuracy ofthe information herein contained. It is for this reasonthat buyers should avail themselves of the opportuni-ty to make inspection prior to the sale. This brochureis intended to provide general information of the equip-ment being offered and is subject to errors, omissions,additions or deletions. Please check with the Auctioneer’sOffice for a final listing. Items offered may or may notnecessarily be sold as described and/or photographed inthis brochure.

MAIL BIDS ACCEPTED WITH A 25% DEPOSIT

IMPORTANT NOTICE:

1020 South Bolton Street – Jacksonville, Texas 75766120 Miles East of Dallas, TX / 30 Miles South of Tyler, TX

Haas SL-10 CNC Lathe (2007)Haas SL-10 CNC Lathe (2007)Haas SL-10 CNC Lathe (2007)

(4) 650 Ton Van Dorn’s (To 1997)(4) 650 Ton Van Dorn’s (To 1997)(4) 650 Ton Van Dorn’s (To 1997)

(9) Lift Trucks To 15,500 Lb. (To 2007)(9) Lift Trucks To 15,500 Lb. (To 2007)(9) Lift Trucks To 15,500 Lb. (To 2007)

1,000 Ton Van Dorn (1998)1,000 Ton Van Dorn (1998)1,000 Ton Van Dorn (1998)

1020 South Bolton Street Jacksonville, Texas 75766

120 Miles East of Dallas, TX / 30 Miles South of Tyler, TX

Complete Plant Closure, Ordered Sold By Secured Creditor

Jeffrey L. Luggen – License No. 00011379Joseph M. Luggen – License No. 00016984

Cincinnati IndustrialAuctioneers Inc.2020 DUNLAP ST., CINCINNATI, OHIO 45214PHONE (513) 241-9701 / FAX (513) 241-6760WEBSITE: cia-auction.com

COMPLETE PLANT CLOSURE, ORDERED SOLDBY SECURED CREDITOR


et AONVOY INDUSTRIES, INC.

Documents

Transcript of et AONVOY INDUSTRIES, INC.