TSE INDUSTRIES, INC.

TSE INDUSTRIES, INC. A Passion for Polymers.™

www.tse-industries.com

4370 112th Terrace North

Clearwater, Florida 33762-4902, USA

(727) 573-7676 (800) 237-7634 (727) 572-0487 Fax

• Founded 1962 by

Walt and Helen Klingel

• 3rd Generation Family Owned &

Operated

• ISO 9001-Certified since 1999

• 255 Employees

• 6 Operating Locations in

Clearwater, FL

• Annual Sales: $75MM

About TSE

Walter C. Klingel, Sr.

1913 - 1999

Helen Klingel

1917 - 2003

(L to R)

Rob Klingel Jr., President,

Engineered Polymers Division, Rob

Klingel, Sr., CEO,

Brad Klingel, President, TSE-OK,

and Rick Klingel, President,

TSE Industries

TSE Industries, Inc.

5260 113th Ave North

Clearwater, FL 33760 USA

727-573-7676

800-237-7634


TSE Industries, Inc.

4370 112th Terrace North


727-573-7676

800-237-7634


TSE-OK, LLC

4421 110th Ave North


727-456-2890

866-652-2557

www.tse-ok.com

WHK BioSystems, LLC

11345 53rd Street North


727-209-8412

855-WHK-BIO1

(855-945-2461)

www.whkbio.com

TSE 1 TSE 2 TSE-OK WHK BioSystems

Our Locations

Crompton Millables

Acquisition

Adiprene/Vibrathane

TSE History

Plastics Division

Rubber Division

Millathane

Division

Specialty

Chemical Division

Crystal Division Sold to ITW 2008

CPT/C-Flex Division Sold to Saint-Gobain 2007

Composites Division TSE-OK Division 100% Owned

Subsidiary

WHK BioSystems TSE & Ottensteiner Kunstoff

Joint Venture (TSE-OK)

1962 1968 1976 1992 1993 1994 2002 2003 2012 2014

Executive Leadership

President

Richard “Rick” Klingel

Chief Financial

Officer

David J. Tottle, CPA

President

C.A.S.E.

Richard “Rick” Klingel

President, EPD &

WHK BioSystems

Robert R. Klingel, Jr.

President

TSE-OK

Louis “Brad” Klingel

Corporate Counsel

Richard T. Catalano,

Esq.

HR Manager

Michelle Hintz-

Prange, PHR

Board of Advisors

Chief Executive

Officer

Robert R. Klingel, Sr.

• ISO 9001 Certified since 1999

• Incoming goods, in-process and final

product validation

• Advanced analytical and automated

clinical chemistry analyses

• Statistical Process Control and Statistical

Quality Control for all products

Certifications

Custom Rubber

Molding &

Extrusion

Cast Urethane

Parts

Engineered Polymers Division

Processing Capabilities

• Injection, Compression & Transfer Molding

• Extrusion

– Cold Feed and Hot Feed

• Autoclaves, Steam and Hot Air

• Rubber Mills (60” and 48”)

• Casting Liquid Polyurethanes

– MAX Casting Machines

– Full Vacuum and Curing Ovens

• Cryogenic Deflashing

• Rapid Prototyping – 3D Printing

• Tooling Design and Modification


Custom Plastic

Fabrication &

CNC Machining


Processing Capabilities

• Custom fabrication of parts from the

highest quality industrial plastics:

− Acetals: Delrin® - Celcon®

− Nylons

− PTFE: Teflon®

− UHMW-PE: Duro Glide®

• Design engineers working with the

latest CAD/CAM programs

• Full Machining Capabilities:

− CNC Routers

− Mills

− Lathes


Markets Served

• ATM Parts & Components

• Conveyor Systems

• Canning & Bottling

• Food Processing

• Medical

• Aerospace

• Materials Handling

• Building & Construction

• Label Machine Components


Contract

Manufacturing of

Specialty Chemicals,

Reactive Hot Melt

Adhesives and

Polyaspartic

Resins

C.A.S.E. Division

Additional Processing Technologies

• Urethane Prepolymers (MDI, TDI &

Aliphatics)

• Pigmented or Filled Polyurethanes

and Polyols

• Blocked Prepolymers

• Cast Urethanes & Prepolymers

• Thermoplastic Polyurethanes (TPU’s)

• Polyurethane Composite Technologies

C.A.S.E. Division

• Low Monomer Prepolymers

• Liquid Urethane Adhesives

• Polyurethane Foams

Production Manufacturing Equipment

• Stainless steel, full vacuum &

pressure rated

• Operate under closed conditions

• Capable of charging from bulk, drum,

tote,& bags

• In-line filtration (10-800 micron),

jacketed draw off lines

• Reactor design allows for flawless

scale up

C.A.S.E. Division

Five 3,750-Gallon One 1,500-Gallon

One 750-Gallon Two 500-Gallon

One 250-Gallon

Pilot Process Capabilities

C.A.S.E. Division

5-Gal, 4-L, 2-L, 1- L lab reactors

•5-Gallon reactor

•15-Gallon reactor




All reactors are stainless steel, full

vacuum, and pressure rated

Each lab reactor designed based on

our 3,750-Gallon reactors

Manufacturer of

Millathane®

Millable

Polyurethane and

Thanecure® TDI

Dimer & Cure

Activator

C.A.S.E. Division

Solid Polyurethanes:

Processed on standard rubber

processing equipment

Properties: Abrasion, oil and ozone

resistance, cut/tear strength

Key Applications: Hi-performance

and longevity, i.e. O-rings, gaskets,

hoses, belts, bladders, rollers, vibration

dampeners, footwear and medical

devices

Millathane®

C.A.S.E. Division

TSE is The World’s Largest Producer of Millable Polyurethane Rubber

Thanecure® T9 is a polyfunctional

isocyanate

Key Applications for T9:

•Crosslinking agent for industrial

adhesives

•Adhesion promoter for rubber-to-

fabric bonding

•Vulcanizing agent for isocyanate-

cured polyurethane rubber

Key Applications for ZM:

•Cure activator for sulfur-cured

Millathane polyurethane rubber

Thanecure® T9 • Thanecure® ZM

C.A.S.E. Division

TSE-EcoSpray®

and TSE-EcoWind®

Environmentally

Preferable, VOC-

Free Composite

Resins

C.A.S.E. Division

TSE-EcoWind®

•VOC-free with super-fast cure time and

ultra low emissions

•Outperforms epoxies and styrene- based

esters

Key Applications:

•Fiber Reinforced Polymer (FRP)

•Filament wound water heater tanks, water

softener pressure vessels, pipes, storage

tanks

VOC-Free Polyurethane

Composite Resins TSE-EcoSpray®

•VOC-free with super-fast cure time

•Replacement for styrene ester & vinyl ester resins

Key Applications:

•Thermoformed products for bath, kitchen and hot tub spas

C.A.S.E. Division

Research &

Development

Labs

Two Locations:

•DAC 1 –

113th Avenue

•DAC 2 –

112th Avenue

Development & Analytical Center (DAC)

DAC Laboratory #1


Technical personnel include:

• 2 Chemists (1 PhD)

• 3 Chemical Engineers

• 4 Laboratory Technicians

Provides QC, Analytical, and R&D Services

• Particle Size Analyzer

• Melt-Flow Indexer

• Electrothermal Melting Point

Apparatus

• Carl-Fisher moisture

analyzers

• SPC & SQC for all products

• In-process and final product

testing

Instrumentation includes:

• Gas Chromatograph FTIR

Spectrometer

• DSC

• 8 Brookfield Viscometers

with computer interface

• Mettler-Toledo Automatic

Titrators with computer

interface

• Mettler Halogen Moisture

Analyzers

DAC Laboratory #2


• Abrasion Testing

• Coefficient of Friction Testing

• Compression Set Testing

• Tensile and Tear Testing

• Rheological Property Testing

• Electrical Properties Rubber,

Plastics

• UV Resistance

• Impact Testing – Plastics

Rubber and Plastic Testing Capabilities

TSE Team Integration

TSE has a highly diversified, yet

synergistic, team of Professionals,

Scientists, Engineers, and

Manufacturing Personnel.

This dedicated group of employees

come together as One Team

allowing TSE to provide the highest

level of Quality, Service, and

Innovation.

Management

Financials

Logistics

Laboratory Science

Process Engineering

Design Engineering

Manufacturing

Quality Assurance

TSE has expertise from the start of the supply chain

all the way through to the end user

• Scientists, Engineers & Process

Experts at all levels

• We develop & manufacture a wide

range of polyurethane chemistries and

systems

• All rubber types, including Nitrile,

Neoprene, Silicone, EPDM, Natural

Rubber & more

• All performance plastic types including

UHMW, Acetyl, Nylon & more

TSE Resources

The UHMW-PE

Sheet Division of

TSE Industries

TSE-OK, LLC

Duro-Glide® UHMW-PE Sheets

• Proudly Made In America

• Compression molded UHMW-PE

• 4’ x 10’ standard sheet

• Larger on Request: 80’ x 160”, 80”

x 240”

• Thicknesses ¼” up to 4”

• Colored Virgin Sheets

• Enhanced UHMW-PE with special

additives for high performance

• Special high speed mixer for

custom blends and colors

TSE-OK, LLC

Markets Served

• Lining Industry – Truck, Ship, Rail Vehicles

• Paper and Logging Industries – Conveyor Systems

• Mining and Agro, Power Industries – Silos, Bunkers

• Marine Industry – Fender Systems, Docks, Hulls

• Custom Fabrication Shops

• Leisure / Sports Industry – Ski Ramps, Ice Rinks

• Food & Beverage Industry – Cutting Boards, Conveyors, Poultry

• Packaging Industry

TSE-OK, LLC

FDA Registered

Contract

Manufacturer for

the Bio-Pharm &

Medical Device

Industries

WHK BioSystems, LLC

WHK BioSystems

Quality

WHK BioSystems, LLC

• Registered with the FDA as a Medical

Device Manufacturer, September 2013

• ISO 13485: 2003 Certified

• ISO Class 7 (Class 10,000) Clean

Room – 2,400SF

• Microbial Validation

−Microbial Enumeration & Top 5

Microorganism Identification

• Manufacturing Environment

• Critical Work Surfaces

WHK BioSystems, LLC

Facility:

• 2,400SF Clean Room, (ISO

Class 7)

• 3,200SF Offices

• 6,000SF Warehouse

(Controlled Environment)

Services

• Product Design & Assembly

• Single Use Components &

Assemblies

• Laser Cutting & Engraving

• Leak Detection, Testing &

Sterilization

• RF Welding

• Vacuum Bag Sealing

• Inventory Management

• LiteSure™ Inspection Light

Tables & Pads

TSE INDUSTRIES, INC.


Thank You!

TSE INDUSTRIES, INC.

Documents

Transcript of TSE INDUSTRIES, INC.