Establishing Integrity Operating Windows (IOWs) IPEIA Conference February 2, 2006 Banff, Alberta...
-
Upload
rose-pearse -
Category
Documents
-
view
317 -
download
16
Transcript of Establishing Integrity Operating Windows (IOWs) IPEIA Conference February 2, 2006 Banff, Alberta...
![Page 1: Establishing Integrity Operating Windows (IOWs) IPEIA Conference February 2, 2006 Banff, Alberta John Reynolds Steamboat Springs, CO, USA Recently retired.](https://reader034.fdocuments.in/reader034/viewer/2022050706/551652f9550346a2698b4c8f/html5/thumbnails/1.jpg)
Establishing Integrity Operating Establishing Integrity Operating Windows (IOW’s)Windows (IOW’s)
IPEIA ConferenceIPEIA ConferenceFebruary 2, 2006February 2, 2006
Banff, AlbertaBanff, AlbertaJohn Reynolds
Steamboat Springs, CO, USARecently retired from
Shell Global Solutions (US) Inc.
![Page 2: Establishing Integrity Operating Windows (IOWs) IPEIA Conference February 2, 2006 Banff, Alberta John Reynolds Steamboat Springs, CO, USA Recently retired.](https://reader034.fdocuments.in/reader034/viewer/2022050706/551652f9550346a2698b4c8f/html5/thumbnails/2.jpg)
2
Outline for this Outline for this PresentationPresentation• The 10 Shell (US) Process Safety Initiatives (PSI)
• The Pressure Equipment Integrity (PEI) Initiative• Corrosion Control Documents (CCD)• Integrity Operating Windows (IOW)• Standard and Critical IOW’s• Integration of IOW’s into the 10 PSI’s• Training of Operators on IOW’s• The Pressure Equipment Integrity Pyramid
![Page 3: Establishing Integrity Operating Windows (IOWs) IPEIA Conference February 2, 2006 Banff, Alberta John Reynolds Steamboat Springs, CO, USA Recently retired.](https://reader034.fdocuments.in/reader034/viewer/2022050706/551652f9550346a2698b4c8f/html5/thumbnails/3.jpg)
3
Ten Process Safety Ten Process Safety Initiatives (PSI) – Initiated Initiatives (PSI) – Initiated
in May, 2000in May, 2000• Pressure Equipment Integrity (PEI) - IOW creation process
• Ensure Safe Production (ESP) - IOW monitoring process
• Operator Training and Procedures - IOW knowledge transfer
• Management Of Change (MOC) - IOW change process• Investigations – 3 Levels up to RCA• Protective Instrument Systems (IPF – “SIL”)• Reliability Centered Maintenance (RCM) • Causal Learning• Audits and Assessments • Process Hazards Analysis (PHA)
![Page 4: Establishing Integrity Operating Windows (IOWs) IPEIA Conference February 2, 2006 Banff, Alberta John Reynolds Steamboat Springs, CO, USA Recently retired.](https://reader034.fdocuments.in/reader034/viewer/2022050706/551652f9550346a2698b4c8f/html5/thumbnails/4.jpg)
4
Process Safety Initiative Process Safety Initiative MetricsMetrics• Each of the 10 PSI’s were required to have four
main metrics to track implementation progress (10 X 4 = 40 metrics total)
• For the PEI process safety initiative we tracked:- Numbers of Corrosion Control Documents (CCD’s) completed- Numbers of process units with RBI completed- Numbers of process units with all IOW’s implemented- Numbers of operators trained on their CCD & IOW’s
• But there was only one bottom line metric for the aggregate of the ten process safety initiatives –> numbers of process safety incidents per year
![Page 5: Establishing Integrity Operating Windows (IOWs) IPEIA Conference February 2, 2006 Banff, Alberta John Reynolds Steamboat Springs, CO, USA Recently retired.](https://reader034.fdocuments.in/reader034/viewer/2022050706/551652f9550346a2698b4c8f/html5/thumbnails/5.jpg)
5
Results of the Process Safety Results of the Process Safety InitiativesInitiatives
YTD Totals
19
23
20
15
9
3
0
5
10
15
20
25
1999 2000 20012002 2003 2004Numbers of
Process Safety Incidents in last 6 years – A real success story
![Page 6: Establishing Integrity Operating Windows (IOWs) IPEIA Conference February 2, 2006 Banff, Alberta John Reynolds Steamboat Springs, CO, USA Recently retired.](https://reader034.fdocuments.in/reader034/viewer/2022050706/551652f9550346a2698b4c8f/html5/thumbnails/6.jpg)
6
Primary Aspects of the Primary Aspects of the Pressure Equipment Pressure Equipment
Integrity (PEI) InitiativeIntegrity (PEI) Initiative• Identify all necessary Integrity Operating Windows (IOW’s)
• Create OEMI Teams (Operations - Engineering - Maintenance - Inspection) in each operating area to create and manage CCD’s and IOW’s
• Create Corrosion Control Documents (CCD’s), which document all process IOW’s
• Train operators on the CCD and IOW’s• Implement IOW’s and Risk-Based Inspection (RBI)• Implement PEI Focused Asset Integrity Reviews
(FAIR®) to monitor progress of the PEI Initiative
![Page 7: Establishing Integrity Operating Windows (IOWs) IPEIA Conference February 2, 2006 Banff, Alberta John Reynolds Steamboat Springs, CO, USA Recently retired.](https://reader034.fdocuments.in/reader034/viewer/2022050706/551652f9550346a2698b4c8f/html5/thumbnails/7.jpg)
7
ESP
RBI
CCD’s & IOW’s
OEMI Teams
101 Essential Elements
PEI PSI PEI PSI PyramidPyramid
![Page 8: Establishing Integrity Operating Windows (IOWs) IPEIA Conference February 2, 2006 Banff, Alberta John Reynolds Steamboat Springs, CO, USA Recently retired.](https://reader034.fdocuments.in/reader034/viewer/2022050706/551652f9550346a2698b4c8f/html5/thumbnails/8.jpg)
8
Corrosion Control Documents – Corrosion Control Documents – ContentsContents• Relatively comprehensive documents for managing equipment
degradation• Description of the process unit and process conditions• Shutdown and start up conditions that may affect corrosion and
degradation mechanisms, as well as normal operation • Process Flow Diagram (PFD) and Materials and Corrosion Diagram
(modified PFD showing construction materials)• Corrosion Control Loops (areas of similar corrosion within the PFD) e.g.
overhead system, slurry system, reflux system, etc.• All potential types of degradation (and fouling) in each process unit and
history of problem areas• Quantitative and predictive models for degradation mechanisms• Vital corrosion control procedures, injections, inhibitors, etc.• Recommended inspection & corrosion monitoring, process changes,
construction materials changes, etc.• Integrity Operating Windows (IOW’s)
![Page 9: Establishing Integrity Operating Windows (IOWs) IPEIA Conference February 2, 2006 Banff, Alberta John Reynolds Steamboat Springs, CO, USA Recently retired.](https://reader034.fdocuments.in/reader034/viewer/2022050706/551652f9550346a2698b4c8f/html5/thumbnails/9.jpg)
9
Corrosion Control Documents – Corrosion Control Documents – ConstructionConstruction
• Unit specific CCD’s completed by an OEMI team which includes:- Site corrosion engineer/specialist- Unit process engineer- Unit inspector- One or more experienced unit operations representatives- Facilitator (knowledgeable / experienced corrosion engineer)
• Final document represents an agreement between the OEMI Team involved and clearly benefits by the synergistic interaction of all team members
![Page 10: Establishing Integrity Operating Windows (IOWs) IPEIA Conference February 2, 2006 Banff, Alberta John Reynolds Steamboat Springs, CO, USA Recently retired.](https://reader034.fdocuments.in/reader034/viewer/2022050706/551652f9550346a2698b4c8f/html5/thumbnails/10.jpg)
10
Establishing Integrity Operating Establishing Integrity Operating WindowsWindows • Historical operating, maintenance & inspection records
• Design data; lab data; operating data• Metallurgical and corrosion data and modules• Process chemistry and engineering knowledge• Reactive chemistry knowledge• Recommended practices (industry and company)• Process and corrosion modeling tools• Subject matter expertise and experience (heavy dose)
Result: Reasonable, practical IOW’s – not too conservative – not non-conservative
![Page 11: Establishing Integrity Operating Windows (IOWs) IPEIA Conference February 2, 2006 Banff, Alberta John Reynolds Steamboat Springs, CO, USA Recently retired.](https://reader034.fdocuments.in/reader034/viewer/2022050706/551652f9550346a2698b4c8f/html5/thumbnails/11.jpg)
11
Integrity Operating WindowsIntegrity Operating Windows
Operating Window
Operating Window
![Page 12: Establishing Integrity Operating Windows (IOWs) IPEIA Conference February 2, 2006 Banff, Alberta John Reynolds Steamboat Springs, CO, USA Recently retired.](https://reader034.fdocuments.in/reader034/viewer/2022050706/551652f9550346a2698b4c8f/html5/thumbnails/12.jpg)
12
Integrity Operating Windows – Integrity Operating Windows – ExamplesExamples
• Typically fall into 2 categories: • Physical
- Various limits on pressures and temperatures, including design, operating, partial pressures, dew points, dry points, heating and cooling rates, delta P, etc.
- Flow rates, injection rates, inhibitor dosage, amperage levels on Alky contactor motors, slurry content, hydrogen flux, vibration limits, corrosivity probes, etc.
• Chemical- pH, water content, acid gas loading, sulfur content, salt content
in crude, NH4HS content, NH3 content, TAN, acid strength, amine strength, inhibitor concentration, chloride contamination levels, oxygen content, etc.
![Page 13: Establishing Integrity Operating Windows (IOWs) IPEIA Conference February 2, 2006 Banff, Alberta John Reynolds Steamboat Springs, CO, USA Recently retired.](https://reader034.fdocuments.in/reader034/viewer/2022050706/551652f9550346a2698b4c8f/html5/thumbnails/13.jpg)
13
IOW Example – Hot Hydrogen IOW Example – Hot Hydrogen ServiceService• Mechanical design window set by the design code e.g. ASME
• IOW set by material limit for high temperature hydrogen attack in API RP 941
• SOR process temperature definitely within the IOW
• EOR process temperature possibly beyond the IOW – need to know the hydrogen partial pressure and duration of EOR conditions
Temperature
Pressure
Mechanical Design Limits
SOR Process Temp
EOR Process Temp IOW
Based on H2 pp Based on Total Pressure
![Page 14: Establishing Integrity Operating Windows (IOWs) IPEIA Conference February 2, 2006 Banff, Alberta John Reynolds Steamboat Springs, CO, USA Recently retired.](https://reader034.fdocuments.in/reader034/viewer/2022050706/551652f9550346a2698b4c8f/html5/thumbnails/14.jpg)
14
Integrity Operating Windows – Integrity Operating Windows – Typical Numbers per Operating UnitTypical Numbers per Operating Unit(before & after an intensive review)(before & after an intensive review)
• Typically start with 5 -10 IOW’s that may already be in place, along with other operating quality variable limits
• Typically end up with 30 – 50 IOW’s with about 5 -10% being critical limits (requires drastic and/or immediate action), and the rest being standard limits (requires attention within a specified timeframe to get back into control)
![Page 15: Establishing Integrity Operating Windows (IOWs) IPEIA Conference February 2, 2006 Banff, Alberta John Reynolds Steamboat Springs, CO, USA Recently retired.](https://reader034.fdocuments.in/reader034/viewer/2022050706/551652f9550346a2698b4c8f/html5/thumbnails/15.jpg)
15
Definitions: Definitions: IOW Critical IOW Critical LimitLimitA limit at which the operator has one
last opportunity to return the process to a safe condition and, if exceeded, could result in one of the following in a fairly short timeframe:
• A Catastrophic Release of Hydrocarbons or Hazardous fluids
• Loss of Containment
• Non-orderly Shutdown
• Significant Environmental Impact
• Other Unacceptable Risk
![Page 16: Establishing Integrity Operating Windows (IOWs) IPEIA Conference February 2, 2006 Banff, Alberta John Reynolds Steamboat Springs, CO, USA Recently retired.](https://reader034.fdocuments.in/reader034/viewer/2022050706/551652f9550346a2698b4c8f/html5/thumbnails/16.jpg)
16
Critical IOW Limit – Critical IOW Limit – ExamplesExamples• Boiler Feed Water Level
- Lost of boiler feed water level could quickly cause boiler tube rupture
• Hydroprocess Reactor Temperature - Metal temperatures below the MDMT could give rise to
brittle fracture
• Heater Tube Skin Temperature- Tube could rupture quickly if overheated, caused, for
example, by a no flow or hot spot condition.
• Sulfuric Acid Strength in Alkylation- Too low acid strength could cause runaway reaction
![Page 17: Establishing Integrity Operating Windows (IOWs) IPEIA Conference February 2, 2006 Banff, Alberta John Reynolds Steamboat Springs, CO, USA Recently retired.](https://reader034.fdocuments.in/reader034/viewer/2022050706/551652f9550346a2698b4c8f/html5/thumbnails/17.jpg)
17
Definition: Standard LevelDefinition: Standard Level
A limit that, if exceeded over a defined period of time, could cause one of the following to eventually occur:
• A catastrophic release of hydrocarbons or hazardous fluids
• Loss of containment
• Non-orderly shutdown
• A negative impact to the long term unit performance and its ability to meet turnaround run length
• Excessive financial impact
![Page 18: Establishing Integrity Operating Windows (IOWs) IPEIA Conference February 2, 2006 Banff, Alberta John Reynolds Steamboat Springs, CO, USA Recently retired.](https://reader034.fdocuments.in/reader034/viewer/2022050706/551652f9550346a2698b4c8f/html5/thumbnails/18.jpg)
18
Standard Level Standard Level ExamplesExamples• REAC NH4HS Concentration
- Corrosion of the air cooler and downstream piping• Heater Tube Skin Temperature
- Metallurgical creep could lead to eventual tube failure.
• Crude Fractionator Dew Point Temperature- Sustained operation below dew point could cause damage to
fractionator internals or potential loss of containment.
• pH of Crude Tower Overhead- Sustained operation below standard pH level could lead to
corrosion of tubing and piping and potential loss of containment.
• Desalter Outlet Salt Content- Sustained operation above standard level could lead to
corrosion and potential loss of containment
![Page 19: Establishing Integrity Operating Windows (IOWs) IPEIA Conference February 2, 2006 Banff, Alberta John Reynolds Steamboat Springs, CO, USA Recently retired.](https://reader034.fdocuments.in/reader034/viewer/2022050706/551652f9550346a2698b4c8f/html5/thumbnails/19.jpg)
19
Integrity Operating Windows – Integrity Operating Windows – SuccessesSuccesses• In the CCD review, one IOW team noticed that a previous
project had installed the wrong construction materials – immediate inspection revealed significant HTHA damage
• An operator on the team disagreed with the unit process engineer and said that “we actually operate much hotter than you think because we use the by-pass” – immediate inspection revealed significant localized damage
• A corrosion engineer questioned the higher level of NH4HS in the REAC system of an HCU – immediate inspection revealed a previously-missed localized spot of significant corrosion
• An IOW was set on NH4HS concentration at another refinery, which then began to take routine lab samples – soon thereafter discovered the concentration was too high and took steps to increase wash water and adjust feedstock
![Page 20: Establishing Integrity Operating Windows (IOWs) IPEIA Conference February 2, 2006 Banff, Alberta John Reynolds Steamboat Springs, CO, USA Recently retired.](https://reader034.fdocuments.in/reader034/viewer/2022050706/551652f9550346a2698b4c8f/html5/thumbnails/20.jpg)
20
Operator Training on CCD’s Operator Training on CCD’s and IOW’sand IOW’s
• Level 1- Awareness and Overview of the PEI Process Safety Initiative- SSA Video / CCD / RBI / OEMI / Operator Training
• Level 2- Introduction to Corrosion Control Documents- What they contain; where they’re stored; how to use them
• Level 3- Details contained within each operator’s unit-specific CCD- Specific IOW’s and the reasoning behind them- What can happen if the IOW is exceeded
![Page 21: Establishing Integrity Operating Windows (IOWs) IPEIA Conference February 2, 2006 Banff, Alberta John Reynolds Steamboat Springs, CO, USA Recently retired.](https://reader034.fdocuments.in/reader034/viewer/2022050706/551652f9550346a2698b4c8f/html5/thumbnails/21.jpg)
21
ESP
RBI
CCD’s & IOW’s
OEMI TEAMS
101 Essential Elements
PEI PSI PEI PSI PyramidPyramid
![Page 22: Establishing Integrity Operating Windows (IOWs) IPEIA Conference February 2, 2006 Banff, Alberta John Reynolds Steamboat Springs, CO, USA Recently retired.](https://reader034.fdocuments.in/reader034/viewer/2022050706/551652f9550346a2698b4c8f/html5/thumbnails/22.jpg)
22
Implementing Risk-Based Implementing Risk-Based Inspection (RBI)Inspection (RBI)• Another major part of our pressure equipment
integrity process safety initiative• We use both a Shell developed more qualitative RBI
(S-RBI), as well as the more quantitative API RBI, both successfully for different needs at different sites
• But RBI will not be covered today – a topic for another day, if you like
• Suffice it to say that any inspection program, be it risk-based, condition-based, or time-based may not be fully reliable without effective identification and implementation of integrity operating windows (IOW’s)
![Page 23: Establishing Integrity Operating Windows (IOWs) IPEIA Conference February 2, 2006 Banff, Alberta John Reynolds Steamboat Springs, CO, USA Recently retired.](https://reader034.fdocuments.in/reader034/viewer/2022050706/551652f9550346a2698b4c8f/html5/thumbnails/23.jpg)
23
Integration of CCD’s, IOW’s Integration of CCD’s, IOW’s & RBI& RBI
Confidence in plant integrityCreating the CCD: Type of degradation
Location of degradation
Susceptibility to degradation
Degradation rates
IOW limits:
Determination & management of the operating limits to avoid degradation
RBI planning:Method of inspection
Where to inspect
Frequency of inspection
Feedback
![Page 24: Establishing Integrity Operating Windows (IOWs) IPEIA Conference February 2, 2006 Banff, Alberta John Reynolds Steamboat Springs, CO, USA Recently retired.](https://reader034.fdocuments.in/reader034/viewer/2022050706/551652f9550346a2698b4c8f/html5/thumbnails/24.jpg)
24
Integration of Multiple Work Integration of Multiple Work Processes Leading To Sustained Processes Leading To Sustained
Asset IntegrityAsset Integrity
Design and Materials Selection
CorrosionControl & IOW’s
Risk-BasedInspection
Long Term Asset Integrity
Asset integrity management is a balancing process designed to achieve lowest total cost
of ownership
Focused Asset Integrity ReviewsFocused Asset Integrity Reviews
![Page 25: Establishing Integrity Operating Windows (IOWs) IPEIA Conference February 2, 2006 Banff, Alberta John Reynolds Steamboat Springs, CO, USA Recently retired.](https://reader034.fdocuments.in/reader034/viewer/2022050706/551652f9550346a2698b4c8f/html5/thumbnails/25.jpg)
25
Along with Asset Integrity Comes Along with Asset Integrity Comes Proven Better Process Safety Proven Better Process Safety PerformancePerformance YTD Totals
19
23
20
15
9
3
0
5
10
15
20
25
1999 2000 20012002 2003 2004
Numbers of Process Safety Incidents in last 6 years in Shell (US) Refining Operations – Facts, not just hopes for the future
![Page 26: Establishing Integrity Operating Windows (IOWs) IPEIA Conference February 2, 2006 Banff, Alberta John Reynolds Steamboat Springs, CO, USA Recently retired.](https://reader034.fdocuments.in/reader034/viewer/2022050706/551652f9550346a2698b4c8f/html5/thumbnails/26.jpg)
26
![Page 27: Establishing Integrity Operating Windows (IOWs) IPEIA Conference February 2, 2006 Banff, Alberta John Reynolds Steamboat Springs, CO, USA Recently retired.](https://reader034.fdocuments.in/reader034/viewer/2022050706/551652f9550346a2698b4c8f/html5/thumbnails/27.jpg)
27
![Page 28: Establishing Integrity Operating Windows (IOWs) IPEIA Conference February 2, 2006 Banff, Alberta John Reynolds Steamboat Springs, CO, USA Recently retired.](https://reader034.fdocuments.in/reader034/viewer/2022050706/551652f9550346a2698b4c8f/html5/thumbnails/28.jpg)
Shell Experience with Integrity Shell Experience with Integrity Operating Windows (IOW’s)Operating Windows (IOW’s)
Time for DiscussionTime for Discussion
[email protected] retired from
Shell Global Solutions (US) Inc.