Epoxy & urethane floor maintenance
-
Upload
slideshaper -
Category
Engineering
-
view
71 -
download
8
Transcript of Epoxy & urethane floor maintenance
EPOXY & URETHANE FLOOR MAINTENANCE
Dust Mop Daily
(It’s important to remove abrasives that can scratch and degrade the conductivity by dry mopping).
Typical Floor Maintenance (urethane top coated systems)
Once a week,
wet mop the floor with a diluted mixture of alkaline (non-residue) floor cleaner and water and allow to dry.
Typical Floor Maintenance (urethane top coated systems)
Auto Scrub every 2 weeks,
or as needed (with a diluted mixture of alkaline non-residue floor cleaner) to remove ground in dirt and contaminants.
Typical Floor Maintenance (urethane top coated systems)
Use soft nylon bristle pads (or red buffer pads).
Typical Floor Maintenance (urethane top coated systems)
With EP floor’s
Maintain the highest aesthetics possible in epoxy topcoated floors, it may be waxed, using the procedures below:
Additional option – waxing (epoxy topcoat systems)
STEP ONE:
Remove old wax and ground in dirt, using floor stripping liquid.
Additional option – waxing (epoxy topcoat systems)
STEP TWO:
Wax the Floor
Additional option – waxing (epoxy topcoat systems)
STEP THREE: Routine maintenance
Once a week, wet mop the floor with a diluted mixture of floor cleaner and water and allow to dry. Power scrubbing equipment
Additional option – waxing (epoxy topcoat systems)
STEP FOUR: Mirror Like Shine.
Buff dry using a spray-buff pad on your floor polishing machine.
Additional option – waxing (epoxy topcoat systems)
From EP Floors Corp.
Clients receive years worth of service from the initial installation (and routine maintenance)
RESTORATION
www.epfloors.com
Join EP Floors Corp
THANK YOU